mail/p5-Mail-SPF and mail/libspf2 install the same bin file: bin/spfquery
Maintainer of mail/p5-Mail-SPF, Please note that PR ports/157107 has just been submitted. If it contains a patch for an upgrade, an enhancement or a bug fix you agree on, reply to this email stating that you approve the patch and a committer will take care of it. The full text of the PR can be found at: http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/157107 -- Edwin Groothuis via the GNATS Auto Assign Tool edwin@FreeBSD.org
State Changed From-To: open->feedback Awaiting maintainers feedback (via the GNATS Auto Assign Tool)
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 There is no patch in the pr, nor a proposed solution. I will have a look but am tied up for the moment so it might be a while. On Tue, May 17, 2011 at 09:10:24AM +0000, Edwin Groothuis wrote: > Maintainer of mail/p5-Mail-SPF, > > Please note that PR ports/157107 has just been submitted. > > If it contains a patch for an upgrade, an enhancement or a bug fix > you agree on, reply to this email stating that you approve the patch > and a committer will take care of it. > > The full text of the PR can be found at: > http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/157107 > > -- > Edwin Groothuis via the GNATS Auto Assign Tool > edwin@FreeBSD.org > > - -- http://www.sonologic.nl/ http://koenmartens.nl/ https://www.revspace.nl/ http://hxxfoundation.com/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iEYEARECAAYFAk3Skn8ACgkQktDgRrkFPpY5kACgmW0D0qNKMnOOVmWaPF6C/Bax HZ4AmwWyKXkCP1xy7RwFIr6PZl8VgMJ8 =30Kl -----END PGP SIGNATURE-----
This patch should fix it. On Tue, May 17, 2011 at 09:10:24AM +0000, Edwin Groothuis wrote: > Maintainer of mail/p5-Mail-SPF, > > Please note that PR ports/157107 has just been submitted. > > If it contains a patch for an upgrade, an enhancement or a bug fix > you agree on, reply to this email stating that you approve the patch > and a committer will take care of it. > > The full text of the PR can be found at: > http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/157107 > > -- > Edwin Groothuis via the GNATS Auto Assign Tool > edwin@FreeBSD.org > > -- http://www.sonologic.nl/ http://koenmartens.nl/ https://www.revspace.nl/ http://hxxfoundation.com/
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 diff -Naur p5-Mail-SPF.dist/Makefile p5-Mail-SPF/Makefile - --- p5-Mail-SPF.dist/Makefile 2009-11-15 10:07:11.000000000 +0100 +++ p5-Mail-SPF/Makefile 2011-05-24 19:52:00.000000000 +0200 @@ -15,6 +15,9 @@ MAINTAINER= gmc@sonologic.nl COMMENT= Reference implementation of the RFC 4408 SPF protocol +OPTIONS= SPFQUERY "Install spfquery command-line tool" on \ + SPFQUERY_SUFFIX "Add .pl suffix to spfquery" off + RUN_DEPENDS= p5-Net-DNS-Resolver-Programmable>=0.002.1:${PORTSDIR}/dns/p5-Net-DNS-Resolver-Programmable \ p5-Net-DNS>=0.58:${PORTSDIR}/dns/p5-Net-DNS \ p5-version>0:${PORTSDIR}/devel/p5-version \ @@ -28,7 +31,6 @@ PERL_MODBUILD= 5.6.0+ CONFIGURE_ARGS= --install_path sbin=${PREFIX}/sbin - -MAN1= spfquery.1 MAN3= Mail::SPF.3 Mail::SPF::Mech::PTR.3 Mail::SPF::Mech.3 \ Mail::SPF::SenderIPAddrMech.3 Mail::SPF::MacroString.3 \ Mail::SPF::Mech::IP4.3 Mail::SPF::Mech::A.3 \ @@ -45,6 +47,24 @@ DOCSDIR= ${PREFIX}/share/doc/p5-Mail-SPF DOCS= CHANGES INSTALL LICENSE README TODO +.if defined(WITH_SPFQUERY) +PLIST_SUB+= SPFQUERY="" + +.if defined(WITH_SPFQUERY_SUFFIX) +PLIST_SUB+= SPFQUERY_SUFFIX=".pl" +EXTRA_PATCHES+= ${FILESDIR}/extra-patch-spfquery-suffix +MAN1+= spfquery.pl.1 +.else +PLIST_SUB+= SPFQUERY_SUFFIX="" +MAN1+= spfquery.1 +CONFLICTS+= libspf2* +.endif + +.else +PLIST_SUB+= SPFQUERY="@comment " +EXTRA_PATCHES+= ${FILESDIR}/extra-patch-no-spfquery +.endif + post-install: .if !defined(NOPORTDOCS) @${MKDIR} ${DOCSDIR} diff -Naur p5-Mail-SPF.dist/files/extra-patch-no-spfquery p5-Mail-SPF/files/extra-patch-no-spfquery - --- p5-Mail-SPF.dist/files/extra-patch-no-spfquery 1970-01-01 01:00:00.000000000 +0100 +++ p5-Mail-SPF/files/extra-patch-no-spfquery 2011-05-24 19:30:10.000000000 +0200 @@ -0,0 +1,33 @@ +diff -Naur orig/Build.PL Build.PL +--- orig/Build.PL 2009-10-31 23:16:14.000000000 +0100 ++++ Build.PL 2011-05-24 19:27:19.000000000 +0200 +@@ -66,7 +66,6 @@ + => 'v0.002.1', + }, + script_files => [ +- 'bin/spfquery' + ], + install_path => { + 'sbin' => '/usr/sbin' +diff -Naur orig/MANIFEST MANIFEST +--- orig/MANIFEST 2009-10-31 23:16:14.000000000 +0100 ++++ MANIFEST 2011-05-24 19:26:56.000000000 +0200 +@@ -1,4 +1,3 @@ +-bin/spfquery + Build.PL + CHANGES + debian/changelog +diff -Naur orig/README README +--- orig/README 2009-10-31 23:16:14.000000000 +0100 ++++ README 2011-05-24 19:27:05.000000000 +0200 +@@ -12,9 +12,8 @@ + This release of Mail::SPF fully conforms to RFC 4408 and passes the 2008.08 + release of the official test-suite <http://www.openspf.org/Test_Suite>. + +-The Mail::SPF source package includes the following additional tools: ++The Mail::SPF source package includes the following additional tool: + +- * spfquery: A command-line tool for performing SPF checks. + * spfd: A daemon for services that perform SPF checks frequently. + + Mail::SPF is not your mother! diff -Naur p5-Mail-SPF.dist/files/extra-patch-spfquery-suffix p5-Mail-SPF/files/extra-patch-spfquery-suffix - --- p5-Mail-SPF.dist/files/extra-patch-spfquery-suffix 1970-01-01 01:00:00.000000000 +0100 +++ p5-Mail-SPF/files/extra-patch-spfquery-suffix 2011-05-24 19:41:56.000000000 +0200 @@ -0,0 +1,1505 @@ +diff -Naur orig/Build.PL Build.PL +--- orig/Build.PL 2009-10-31 23:16:14.000000000 +0100 ++++ Build.PL 2011-05-24 19:40:10.000000000 +0200 +@@ -66,7 +66,7 @@ + => 'v0.002.1', + }, + script_files => [ +- 'bin/spfquery' ++ 'bin/spfquery.pl' + ], + install_path => { + 'sbin' => '/usr/sbin' +diff -Naur orig/MANIFEST MANIFEST +--- orig/MANIFEST 2009-10-31 23:16:14.000000000 +0100 ++++ MANIFEST 2011-05-24 19:40:36.000000000 +0200 +@@ -1,4 +1,4 @@ +-bin/spfquery ++bin/spfquery.pl + Build.PL + CHANGES + debian/changelog +diff -Naur orig/README README +--- orig/README 2009-10-31 23:16:14.000000000 +0100 ++++ README 2011-05-24 19:40:54.000000000 +0200 +@@ -14,8 +14,8 @@ + + The Mail::SPF source package includes the following additional tools: + +- * spfquery: A command-line tool for performing SPF checks. +- * spfd: A daemon for services that perform SPF checks frequently. ++ * spfquery.pl: A command-line tool for performing SPF checks. ++ * spfd: A daemon for services that perform SPF checks frequently. + + Mail::SPF is not your mother! + ----------------------------- +diff -Naur orig/bin/spfquery bin/spfquery +--- orig/bin/spfquery 2009-10-31 23:16:14.000000000 +0100 ++++ bin/spfquery 1970-01-01 01:00:00.000000000 +0100 +@@ -1,731 +0,0 @@ +-#!/usr/bin/perl +- +-# +-# spfquery: Command-line tool for performing SPF queries +-# +-# (C) 2005-2008 Julian Mehnle <julian@mehnle.net> +-# 2004 Wayne Schlitt <wayne@schlitt.net> +-# $Id: spfquery 138 2006-01-22 18:00:34Z julian $ +-# +-############################################################################## +- +-=head1 NAME +- +-spfquery - (Mail::SPF) - Checks if a given set of e-mail parameters matches a +-domain's SPF policy +- +-=head1 VERSION +- +-2.501 +- +-=head1 SYNOPSIS +- +-=over +- +-=item B<Preferred usage:> +- +-B<spfquery> [B<--versions>|B<-v> B<1>|B<2>|B<1,2>] [B<--scope>|B<-s> B<helo>|B<mfrom>|B<pra>] +-B<--identity>|B<--id> I<identity> B<--ip-address>|B<--ip> I<ip-address> +-[B<--helo-identity>|B<--helo-id> I<helo-identity>] [I<OPTIONS>] +- +-B<spfquery> [B<--versions>|B<-v> B<1>|B<2>|B<1,2>] [B<--scope>|B<-s> B<helo>|B<mfrom>|B<pra>] +-B<--file>|B<-f> I<filename>|B<-> [I<OPTIONS>] +- +-=item B<Legacy usage:> +- +-B<spfquery> B<--helo> I<helo-identity> B<--ip-address>|B<--ip> I<ip-address> [I<OPTIONS>] +- +-B<spfquery> B<--mfrom> I<mfrom-identity> B<--ip-address>|B<--ip> I<ip-address> +-[B<--helo> I<helo-identity>] [I<OPTIONS>] +- +-B<spfquery> B<--pra> I<pra-identity> B<--ip-address>|B<--ip> I<ip-address> [I<OPTIONS>] +- +-=item B<Other usage:> +- +-B<spfquery> B<--version>|B<-V> +- +-B<spfquery> B<--help> +- +-=back +- +-=head1 DESCRIPTION +- +-B<spfquery> checks if a given set of e-mail parameters (e.g., the SMTP sender's +-IP address) matches the responsible domain's Sender Policy Framework (SPF) +-policy. For more information on SPF see L<http://www.openspf.org>. +- +-=head2 Preferred Usage +- +-The following usage forms are preferred over the L<legacy forms|/Legacy usage> +-used by older B<spfquery> versions: +- +-The B<--identity> form checks if the given I<ip-address> is an authorized SMTP +-sender for the given C<helo> hostname, C<mfrom> envelope sender e-mail address, +-or C<pra> (so-called purported resonsible address) e-mail address, depending +-on the value of the B<--scope> option (which defaults to B<mfrom> if omitted). +- +-The B<--file> form reads "I<ip-address> I<identity> [I<helo-identity>]" tuples +-from the file with the specified I<filename>, or from standard input if +-I<filename> is B<->, and checks them against the specified scope (B<mfrom> by +-default). +- +-Both forms support an optional B<--versions> option, which specifies a +-comma-separated list of the SPF version numbers of SPF records that may be +-used. B<1> means that C<v=spf1> records should be used. B<2> means that +-C<spf2.0> records should be used. Defaults to B<1,2>, i.e., uses any SPF +-records that are available. Records of a higher version are preferred. +- +-=head2 Legacy Usage +- +-B<spfquery> versions before 2.500 featured the following usage forms, which are +-discouraged but still supported for L<backwards compatibility|/COMPATIBILITY>: +- +-The B<--helo> form checks if the given I<ip-address> is an authorized SMTP +-sender for the C<HELO> hostname given as the I<identity> (so-called C<HELO> +-check). +- +-The B<--mfrom> form checks if the given I<ip-address> is an authorized SMTP +-sender for the envelope sender email-address (or domain) given as the +-I<identity> (so-called C<MAIL FROM> check). If a domain is given instead of an +-e-mail address, C<postmaster> will be substituted for the localpart. +- +-The B<--pra> form checks if the given I<ip-address> is an authorized SMTP +-sender for the PRA (Purported Responsible Address) e-mail address given as the +-identity. +- +-=head2 Other Usage +- +-The B<--version> form prints version information of spfquery. The B<--help> +-form prints usage information for spfquery. +- +-=head1 OPTIONS +- +-=head2 Standard Options +- +-The preferred and legacy forms optionally take any of the following +-I<OPTIONS>: +- +-=over +- +-=item B<--default-explanation> I<string> +- +-=item B<--def-exp> I<string> +- +-Use the specified I<string> as the default explanation if the authority domain +-does not specify an explanation string of its own. +- +-=item B<--hostname> I<hostname> +- +-Use I<hostname> as the host name of the local system instead of auto-detecting +-it. +- +-=item B<--keep-comments> +- +-=item B<--no-keep-comments> +- +-Do (not) print any comments found when reading from a file or from standard +-input. +- +-=item B<--sanitize> (currently ignored) +- +-=item B<--no-sanitize> (currently ignored) +- +-Do (not) sanitize the output by condensing consecutive white-space into a +-single space and replacing non-printable characters with question marks. +-Enabled by default. +- +-=item B<--debug> (currently ignored) +- +-Print out debug information. +- +-=back +- +-=head2 Black Magic Options +- +-Several options that were supported by earlier versions of B<spfquery> are +-considered black magic (i.e. potentially dangerous for the innocent user) and +-are thus disabled by default. If the L<B<Mail::SPF::BlackMagic>> Perl module +-is installed, they may be enabled by specifying B<--enable-black-magic>. +- +-=over +- +-=item B<--max-dns-interactive-terms> I<n> +- +-Evaluate a maximum of I<n> DNS-interactive mechanisms and modifiers per SPF +-check. Defaults to B<10>. Do I<not> override the default unless you know what +-you are doing! +- +-=item B<--max-name-lookups-per-term> I<n> +- +-Perform a maximum of I<n> DNS name look-ups per mechanism or modifier. +-Defaults to B<10>. Do I<not> override the default unless you know what you are +-doing! +- +-=item B<--authorize-mxes-for> I<email-address>|I<domain>B<,>... +- +-Consider all the MXes of the comma-separated list of I<email-address>es and +-I<domain>s as inherently authorized. +- +-=item B<--tfwl> +- +-Perform C<trusted-forwarder.org> accreditation checking. +- +-=item B<--guess> I<spf-terms> +- +-Use I<spf-terms> as a default record if no SPF record is found. +- +-=item B<--local> I<spf-terms> +- +-Process I<spf-terms> as local policy before resorting to a default result +-(the implicit or explicit C<all> mechanism at the end of the domain's SPF +-record). For example, this could be used for white-listing one's secondary +-MXes: C<mx:mydomain.example.org>. +- +-=item B<--override> I<domain>B<=>I<spf-record> +- +-=item B<--fallback> I<domain>B<=>I<spf-record> +- +-Set overrides and fallbacks. Each option can be specified multiple times. For +-example: +- +- --override example.org='v=spf1 -all' +- --override '*.example.net'='v=spf1 a mx -all' +- --fallback example.com='v=spf1 -all' +- +-=back +- +-=head1 RESULT CODES +- +-=over 12 +- +-=item B<pass> +- +-The specified IP address is an authorized SMTP sender for the identity. +- +-=item B<fail> +- +-The specified IP address is not an authorized SMTP sender for the identity. +- +-=item B<softfail> +- +-The specified IP address is not an authorized SMTP sender for the identity, +-however the authority domain is still testing out its SPF policy. +- +-=item B<neutral> +- +-The identity's authority domain makes no assertion about the status of the IP +-address. +- +-=item B<permerror> +- +-A permanent error occurred while evaluating the authority domain's policy +-(e.g., a syntax error in the SPF record). Manual intervention is required +-from the authority domain. +- +-=item B<temperror> +- +-A temporary error occurred while evaluating the authority domain's policy +-(e.g., a DNS error). Try again later. +- +-=item B<none> +- +-There is no applicable SPF policy for the identity domain. +- +-=back +- +-=head1 EXIT CODES +- +- Result | Exit code +- -----------+----------- +- pass | 0 +- fail | 1 +- softfail | 2 +- neutral | 3 +- permerror | 4 +- temperror | 5 +- none | 6 +- +-=head1 EXAMPLES +- +- spfquery --scope mfrom --id user@example.com --ip 1.2.3.4 +- spfquery --file test_data +- echo "127.0.0.1 user@example.com helohost.example.com" | spfquery -f - +- +-=head1 COMPATIBILITY +- +-B<spfquery> has undergone the following interface changes compared to earlier +-versions: +- +-=over +- +-=item B<2.500> +- +-=over +- +-=item * +- +-A new preferred usage style for performing individual SPF checks has been +-introduced. The new style accepts a unified B<--identity> option and an +-optional B<--scope> option that specifies the type (scope) of the identity. In +-contrast, the legacy usage style requires a separate usage form for every +-supported scope. See L</Preferred usage> and L</Legacy usage> for details. +- +-=item * +- +-The former C<unknown> and C<error> result codes have been renamed to C<permerror> +-and C<temperror>, respectively, in order to comply with RFC 4408 terminology. +- +-=item * +- +-SPF checks with an empty identity are no longer supported. In the case of an +-empty C<MAIL FROM> SMTP transaction parameter, perform a check with the C<helo> +-scope directly. +- +-=item * +- +-The B<--debug> and B<--(no-)sanitize> options are currently ignored by this +-version of B<spfquery>. They will again be supported in the future. +- +-=item * +- +-Several features that were supported by earlier versions of B<spfquery> are +-considered black magic and thus are now disabled by default. See L</Black +-Magic Options>. +- +-=item * +- +-Several option names have been deprecated. This is a list of them and their +-preferred synonyms: +- +- Deprecated options | Preferred options +- ---------------------+----------------------------- +- --sender, -s | --mfrom +- --ipv4, -i | --ip-address, --ip +- --name | --hostname +- --max-lookup-count, | --max-dns-interactive-terms +- --max-lookup | +- --rcpt-to, -r | --authorize-mxes-for +- --trusted | --tfwl +- +-=back +- +-=back +- +-=head1 SEE ALSO +- +-L<Mail::SPF>, L<spfd(8)> +- +-L<http://www.ietf.org/rfc/rfc4408.txt> +- +-=head1 AUTHORS +- +-This version of B<spfquery> is a complete rewrite by Julian Mehnle +-<julian@mehnle.net>, based on an earlier version written by Meng Weng Wong +-<mengwong+spf@pobox.com> and Wayne Schlitt <wayne@schlitt.net>. +- +-=cut +- +-our $VERSION = '2.501'; +- +-use warnings; +-use strict; +- +-use IO::File; +-use Getopt::Long qw(:config gnu_compat no_ignore_case); +-use Error ':try'; +-use Mail::SPF; +- +-use constant TRUE => (0 == 0); +-use constant FALSE => not TRUE; +- +-use constant exit_codes_by_result_code => { +- pass => 0, +- fail => 1, +- softfail => 2, +- neutral => 3, +- permerror => 4, +- temperror => 5, +- none => 6 +-}; +- +-# Helper Functions +-############################################################################## +- +-sub usage { +- STDERR->printf(<<'EOT'); +-Preferred Usage: +- spfquery [--versions|-v 1|2|1,2] [--scope|-s helo|mfrom|pra] +- --identity|--id <identity> --ip-address|--ip <ip-address> +- [--helo-identity|--helo-id <helo-identity>] [OPTIONS] +- spfquery [--versions|-v 1|2|1,2] [--scope|-s helo|mfrom|pra] +- --file|-f <filename>|- [OPTIONS] +- +-Legacy Usage: +- spfquery --helo <helo-identity> --ip-address|--ip <ip-address> [OPTIONS] +- spfquery --mfrom <mfrom-identity> --ip-address|--ip <ip-address> +- [--helo <helo-identity>] [OPTIONS] +- spfquery --pra <pra-identity> --ip-address|--ip <ip-address> [OPTIONS] +- +-Other Usage: +- spfquery --version|-V +- +-See `spfquery --help` for more information. +-EOT +- return; +-} +- +-sub help { +- print(<<'EOT'); +-Preferred Usage: +- spfquery [--versions|-v 1|2|1,2] [--scope|-s helo|mfrom|pra] +- --identity|--id <identity> --ip-address|--ip <ip-address> +- [--helo-identity|--helo-id <helo-identity>] [OPTIONS] +- spfquery [--versions|-v 1|2|1,2] [--scope|-s helo|mfrom|pra] +- --file|-f <filename>|- [OPTIONS] +- +-Legacy Usage: +- spfquery --helo <helo-identity> --ip-address|--ip <ip-address> [OPTIONS] +- spfquery --mfrom <mfrom-identity> --ip-address|--ip <ip-address> +- [--helo <helo-identity>] [OPTIONS] +- spfquery --pra <pra-identity> --ip-address|--ip <ip-address> [OPTIONS] +- +-Other Usage: +- spfquery --version|-V +- +-spfquery performs SPF checks based on the command-line arguments or data given +-in a file or on standard input. +- +-Only the preferred and other usage forms are explained here. See the +-spfquery(1) man-page for an explanation of the legacy usage forms. +- +-The "--identity" form checks if the given <ip-address> is an authorized SMTP +-sender for the given "helo" hostname, "mfrom" envelope sender e-mail address, +-or "pra" (purported resonsible address) e-mail address, depending on the value +-of the "--scope" option (which defaults to "mfrom" if omitted). +- +-The "--file" form reads "<ip-address> <identity> [<helo-identity>]" tuples from +-the file with the specified <filename>, or from standard input if <filename> is +-"-", and checks them against the specified scope ("mfrom" by default). +- +-The "--version" form prints version information of spfquery. +- +-Valid OPTIONS (and their defaults) are: +- --default-explanation <string> +- Default explanation string to use (sensible default). +- --hostname <hostname> +- The name of the system doing the SPF checking (local +- system's configured hostname). +- --keep-comments Print comments found when reading from a file. +- --no-sanitize Do not clean up invalid characters in output. +- --debug Output debugging information. +- +-Black-magic OPTIONS are: +- --max-dns-interactive-terms <n> +- Maximum number of DNS-interactive mechanisms and +- modifiers (10). +- --max-name-lookups-per-term <n> +- Maximum number of DNS name look-ups per mechanism or +- modifier (10). +- --authorize-mxes-for <email-address>|<domain>,... +- A comma-separated list of e-mail addresses and domains +- whose MXes will be considered inherently authorized. +- --tfwl Check trusted-forwarder.org white-list. +- --guess <spf-terms> Default checks if no SPF record is found. +- --local <spf-terms> Local policy to process before default result. +- --override <domain>=<spf-record> +- --fallback <domain>=<spf-record> +- Set override and fallback SPF records for domains. +- +-Examples: +- spfquery --scope mfrom --id user@example.com --ip 1.2.3.4 +- spfquery --file test_data +- echo "127.0.0.1 user@example.com helohost.example.com" | spfquery -f - +-EOT +- return; +-} +- +-sub deprecated_option { +- my ($old_option, $new_option, $options) = @_; +- return FALSE if not exists($options->{$old_option}); +- STDERR->print( +- "Warning: '$old_option' option is deprecated" . +- ($new_option ? "; use '$new_option' instead" : '') . +- ".\n" +- ); +- $options->{$new_option} = delete($options->{$old_option}); +- return TRUE; +-} +- +-sub unsupported_option { +- my ($option_name, $options) = @_; +- return FALSE if not exists($options->{$option_name}); +- STDERR->print("Error: '$option_name' option is no longer supported.\n"); +- return TRUE; +-} +- +-sub black_magic_option { +- my ($option_name, $options) = @_; +- return FALSE if not exists($options->{$option_name}); +- STDERR->print("Error: '$option_name' option is black magic! Do not use it!\n"); +- return TRUE; +-} +- +-# Command-line Option Handling +-############################################################################## +- +-my $options = {}; +-my $getopt_result = GetOptions( +- $options, +- +- 'file|f=s', +- +- 'versions|v=s', +- 'scope=s', +- 's=s', # Special handling for ambiguous 's' option (formerly a synonym +- # for 'sender', now preferredly a synonym for 'scope'). +- 'identity|id=s', +- 'ip-address|ip=s', +- 'helo-identity|helo-id=s', +- +- # Legacy/shortcut options: +- 'mfrom|mail-from|m=s', +- 'helo|h=s', +- +- 'default-explanation|def-exp=s', +- 'hostname=s', +- +- 'keep-comments!', +- 'debug!', # TODO Implement! +- 'sanitize!', # TODO Implement! +- +- # Black Magic options: +- 'enable-black-magic!', +- 'max-dns-interactive-terms=i', +- 'max-name-lookups-per-term=i', +- 'authorize-mxes-for=s', +- # TODO implement! +- 'tfwl!', # TODO Implement! +- 'guess=s', # TODO Implement! +- 'local=s', # TODO Implement! +- 'override=s%', # TODO Implement! +- 'fallback=s%', # TODO Implement! +- +- # Meta actions: +- 'version|V!', +- 'help!', +- +- # Deprecated options: +- 'sender=s', # Now 'scope'/'identity' or 'mfrom' +- 'ipv4=s', # Now 'ip-address' +- 'i=s', # Now 'ip-address' +- 'name=s', # Now 'hostname' +- 'max-lookup-count=i', +- 'max-lookup=i', # Now 'max-dns-interactive-terms' +- 'rcpt-to=s', # Now 'authorize-mxes-for' +- 'r=s', # Now 'authorize-mxes-for' +- 'trusted!' # Now 'tfwl' +-); +- +-if (not $getopt_result) { +- usage(); +- exit(255); +-} +- +-if ($options->{help}) { +- help(); +- exit(0); +-} +- +-if ($options->{version}) { +- print("spfquery version $VERSION (using Mail::SPF)\n"); +- exit(0); +-} +- +-deprecated_option('sender', 'mfrom', $options); +-deprecated_option('ipv4', 'ip-address', $options); +-deprecated_option('i', 'ip-address', $options); +-deprecated_option('name', 'hostname', $options); +-deprecated_option('max-lookup-count', 'max-dns-interactive-terms', $options); +-deprecated_option('max-lookup', 'max-dns-interactive-terms', $options); +-deprecated_option('rcpt-to', 'authorize-mxes-for', $options); +-deprecated_option('r', 'authorize-mxes-for', $options); +-deprecated_option('trusted', 'tfwl', $options); +- +-if ($options->{'enable-black-magic'}) { +- if (not defined(eval('require Mail::SPF::BlackMagic'))) { +- STDERR->print("Error: Cannot enable black magic. Unable to load Mail::SPF::BlackMagic.\n"); +- exit(255); +- } +- # else: Black magic enabled! +-} +-elsif ( +- black_magic_option('max-dns-interactive-terms', $options) or +- black_magic_option('max-name-lookups-per-term', $options) or +- black_magic_option('rcpt-to', $options) or +- black_magic_option('trusted', $options) or +- black_magic_option('guess', $options) or +- black_magic_option('local', $options) or +- black_magic_option('override', $options) or +- black_magic_option('fallback', $options) +-) { +- exit(255); +-} +- +-my @versions = split(',', $options->{versions} || ''); +-my $scope = $options->{scope}; +-my $identity = $options->{identity}; +-my $ip_address = $options->{'ip-address'}; +-my $helo_identity = $options->{'helo-identity'}; +- +-# Heuristic for distinguishing between 's(cope)' and 's(ender)': +-if (defined(my $s = $options->{s})) { +- if ( +- not defined($scope) and # No explicit 'scope' option has been specified, and +- $s !~ /[@.]/ # 's' option contains neither an '@' nor a dot, +- # so it cannot be an e-mail address or a domain. +- ) { +- # Thus it must be meant as the 'scope' option: +- $scope = $s; +- } +- else { +- # Else, it must be meant as the deprecated 'sender' option: +- $options->{mfrom} = $s; +- } +-} +- +-# Heuristic for when explicit 'scope'/'s(cope)' option is absent: +-if (not defined($scope)) { +- if (defined($identity) or defined($options->{file})) { +- # Identity has been specified, or input will be read from file: +- # apply the 'scope' option default: +- $scope = 'mfrom'; +- } +- elsif (defined($options->{helo})) { +- $scope = 'helo'; +- $identity = $options->{helo}; +- } +- elsif (defined($options->{mfrom})) { +- $scope = 'mfrom'; +- $identity = $options->{mfrom}; +- $helo_identity ||= $options->{helo}; +- } +- elsif (defined($options->{pra})) { +- $scope = 'pra'; +- $identity = $options->{pra}; +- } +-} +- +-my $default_explanation = $options->{'default-explanation'}; +-my $hostname = $options->{hostname}; +- +-if ( +- not defined($scope) or +- not (defined($identity) xor defined($options->{file})) +-) { +- usage(); +- exit(255); +-} +- +-if (defined($identity) and $identity eq '') { +- STDERR->print("Error: Empty identities are not supported. See spfquery(1).\n"); +- exit(255); +-} +- +-# Process the SPF Request(s) +-############################################################################## +- +-try { +- my $spf_server = Mail::SPF::Server->new( +- default_authority_explanation +- => $default_explanation, +- hostname => $hostname, +- # debug => $options->{debug}, +- # sanitize => $options->{sanitize}, +- +- # Black Magic: +- ( +- exists($options->{'max-dns-interactive-terms'}) ? +- (max_dns_interactive_terms => $options->{'max-dns-interactive-terms'} || undef) +- : () +- ), +- ( +- exists($options->{'max-name-lookups-per-term'}) ? +- (max_name_lookups_per_term => $options->{'max-name-lookups-per-term'} || undef) +- : () +- ) +- # rcpt_to => $options->{'rcpt-to'}, +- # trusted => $options->{trusted}, +- # guess => $options->{guess}, +- # local => $options->{local}, +- # override => $options->{override}, +- # fallback => $options->{fallback}, +- ); +- +- my $exit_code; +- +- if (not defined($options->{file})) { +- # Single request: +- my $result_code = do_process( +- $spf_server, +- versions => @versions ? [@versions] : undef, +- scope => $scope, +- identity => $identity, +- ip_address => $ip_address, +- helo_identity => $helo_identity +- ); +- $exit_code = exit_codes_by_result_code->{$result_code}; +- } +- else { +- # File request: +- my $file = $options->{file} eq '-' ? \*STDIN : IO::File->new($options->{file}) +- or die("Could not open: $options->{file}\n"); +- while (<$file>) { +- chomp; +- s/^\s*//; +- next if /^$/; +- if (/^#/) { +- print("$_\n") if $options->{'keep-comments'}; +- next; +- } +- ($ip_address, $identity, $helo_identity) = split; +- my $result_code = do_process( +- $spf_server, +- versions => @versions ? [@versions] : undef, +- scope => $scope, +- identity => $identity, +- ip_address => $ip_address, +- helo_identity => $helo_identity +- ); +- $exit_code ||= exit_codes_by_result_code->{$result_code}; +- } +- } +- +- exit($exit_code); +-} +-catch Mail::SPF::Exception with { +- my ($e) = @_; +- STDERR->printf("Error: %s.\n", $e->text); +- exit(255); +-}; +- +- +-# Helper Function +-############################################################################## +- +-sub do_process { +- my ($spf_server, %request_options) = @_; +- my $request = Mail::SPF::Request->new(%request_options); +- my $result = $spf_server->process($request); +- printf( +- "%s\n%s\n%s\n%s\n", +- $result->code, +- ( +- $result->can('authority_explanation') ? +- $result->authority_explanation +- : $result->local_explanation +- ), +- $result->local_explanation, +- $result->received_spf_header +- ); +- return $result->code; +-} +diff -Naur orig/bin/spfquery.pl bin/spfquery.pl +--- orig/bin/spfquery.pl 1970-01-01 01:00:00.000000000 +0100 ++++ bin/spfquery.pl 2009-10-31 23:16:14.000000000 +0100 +@@ -0,0 +1,731 @@ ++#!/usr/bin/perl ++ ++# ++# spfquery: Command-line tool for performing SPF queries ++# ++# (C) 2005-2008 Julian Mehnle <julian@mehnle.net> ++# 2004 Wayne Schlitt <wayne@schlitt.net> ++# $Id: spfquery 138 2006-01-22 18:00:34Z julian $ ++# ++############################################################################## ++ ++=head1 NAME ++ ++spfquery - (Mail::SPF) - Checks if a given set of e-mail parameters matches a ++domain's SPF policy ++ ++=head1 VERSION ++ ++2.501 ++ ++=head1 SYNOPSIS ++ ++=over ++ ++=item B<Preferred usage:> ++ ++B<spfquery> [B<--versions>|B<-v> B<1>|B<2>|B<1,2>] [B<--scope>|B<-s> B<helo>|B<mfrom>|B<pra>] ++B<--identity>|B<--id> I<identity> B<--ip-address>|B<--ip> I<ip-address> ++[B<--helo-identity>|B<--helo-id> I<helo-identity>] [I<OPTIONS>] ++ ++B<spfquery> [B<--versions>|B<-v> B<1>|B<2>|B<1,2>] [B<--scope>|B<-s> B<helo>|B<mfrom>|B<pra>] ++B<--file>|B<-f> I<filename>|B<-> [I<OPTIONS>] ++ ++=item B<Legacy usage:> ++ ++B<spfquery> B<--helo> I<helo-identity> B<--ip-address>|B<--ip> I<ip-address> [I<OPTIONS>] ++ ++B<spfquery> B<--mfrom> I<mfrom-identity> B<--ip-address>|B<--ip> I<ip-address> ++[B<--helo> I<helo-identity>] [I<OPTIONS>] ++ ++B<spfquery> B<--pra> I<pra-identity> B<--ip-address>|B<--ip> I<ip-address> [I<OPTIONS>] ++ ++=item B<Other usage:> ++ ++B<spfquery> B<--version>|B<-V> ++ ++B<spfquery> B<--help> ++ ++=back ++ ++=head1 DESCRIPTION ++ ++B<spfquery> checks if a given set of e-mail parameters (e.g., the SMTP sender's ++IP address) matches the responsible domain's Sender Policy Framework (SPF) ++policy. For more information on SPF see L<http://www.openspf.org>. ++ ++=head2 Preferred Usage ++ ++The following usage forms are preferred over the L<legacy forms|/Legacy usage> ++used by older B<spfquery> versions: ++ ++The B<--identity> form checks if the given I<ip-address> is an authorized SMTP ++sender for the given C<helo> hostname, C<mfrom> envelope sender e-mail address, ++or C<pra> (so-called purported resonsible address) e-mail address, depending ++on the value of the B<--scope> option (which defaults to B<mfrom> if omitted). ++ ++The B<--file> form reads "I<ip-address> I<identity> [I<helo-identity>]" tuples ++from the file with the specified I<filename>, or from standard input if ++I<filename> is B<->, and checks them against the specified scope (B<mfrom> by ++default). ++ ++Both forms support an optional B<--versions> option, which specifies a ++comma-separated list of the SPF version numbers of SPF records that may be ++used. B<1> means that C<v=spf1> records should be used. B<2> means that ++C<spf2.0> records should be used. Defaults to B<1,2>, i.e., uses any SPF ++records that are available. Records of a higher version are preferred. ++ ++=head2 Legacy Usage ++ ++B<spfquery> versions before 2.500 featured the following usage forms, which are ++discouraged but still supported for L<backwards compatibility|/COMPATIBILITY>: ++ ++The B<--helo> form checks if the given I<ip-address> is an authorized SMTP ++sender for the C<HELO> hostname given as the I<identity> (so-called C<HELO> ++check). ++ ++The B<--mfrom> form checks if the given I<ip-address> is an authorized SMTP ++sender for the envelope sender email-address (or domain) given as the ++I<identity> (so-called C<MAIL FROM> check). If a domain is given instead of an ++e-mail address, C<postmaster> will be substituted for the localpart. ++ ++The B<--pra> form checks if the given I<ip-address> is an authorized SMTP ++sender for the PRA (Purported Responsible Address) e-mail address given as the ++identity. ++ ++=head2 Other Usage ++ ++The B<--version> form prints version information of spfquery. The B<--help> ++form prints usage information for spfquery. ++ ++=head1 OPTIONS ++ ++=head2 Standard Options ++ ++The preferred and legacy forms optionally take any of the following ++I<OPTIONS>: ++ ++=over ++ ++=item B<--default-explanation> I<string> ++ ++=item B<--def-exp> I<string> ++ ++Use the specified I<string> as the default explanation if the authority domain ++does not specify an explanation string of its own. ++ ++=item B<--hostname> I<hostname> ++ ++Use I<hostname> as the host name of the local system instead of auto-detecting ++it. ++ ++=item B<--keep-comments> ++ ++=item B<--no-keep-comments> ++ ++Do (not) print any comments found when reading from a file or from standard ++input. ++ ++=item B<--sanitize> (currently ignored) ++ ++=item B<--no-sanitize> (currently ignored) ++ ++Do (not) sanitize the output by condensing consecutive white-space into a ++single space and replacing non-printable characters with question marks. ++Enabled by default. ++ ++=item B<--debug> (currently ignored) ++ ++Print out debug information. ++ ++=back ++ ++=head2 Black Magic Options ++ ++Several options that were supported by earlier versions of B<spfquery> are ++considered black magic (i.e. potentially dangerous for the innocent user) and ++are thus disabled by default. If the L<B<Mail::SPF::BlackMagic>> Perl module ++is installed, they may be enabled by specifying B<--enable-black-magic>. ++ ++=over ++ ++=item B<--max-dns-interactive-terms> I<n> ++ ++Evaluate a maximum of I<n> DNS-interactive mechanisms and modifiers per SPF ++check. Defaults to B<10>. Do I<not> override the default unless you know what ++you are doing! ++ ++=item B<--max-name-lookups-per-term> I<n> ++ ++Perform a maximum of I<n> DNS name look-ups per mechanism or modifier. ++Defaults to B<10>. Do I<not> override the default unless you know what you are ++doing! ++ ++=item B<--authorize-mxes-for> I<email-address>|I<domain>B<,>... ++ ++Consider all the MXes of the comma-separated list of I<email-address>es and ++I<domain>s as inherently authorized. ++ ++=item B<--tfwl> ++ ++Perform C<trusted-forwarder.org> accreditation checking. ++ ++=item B<--guess> I<spf-terms> ++ ++Use I<spf-terms> as a default record if no SPF record is found. ++ ++=item B<--local> I<spf-terms> ++ ++Process I<spf-terms> as local policy before resorting to a default result ++(the implicit or explicit C<all> mechanism at the end of the domain's SPF ++record). For example, this could be used for white-listing one's secondary ++MXes: C<mx:mydomain.example.org>. ++ ++=item B<--override> I<domain>B<=>I<spf-record> ++ ++=item B<--fallback> I<domain>B<=>I<spf-record> ++ ++Set overrides and fallbacks. Each option can be specified multiple times. For ++example: ++ ++ --override example.org='v=spf1 -all' ++ --override '*.example.net'='v=spf1 a mx -all' ++ --fallback example.com='v=spf1 -all' ++ ++=back ++ ++=head1 RESULT CODES ++ ++=over 12 ++ ++=item B<pass> ++ ++The specified IP address is an authorized SMTP sender for the identity. ++ ++=item B<fail> ++ ++The specified IP address is not an authorized SMTP sender for the identity. ++ ++=item B<softfail> ++ ++The specified IP address is not an authorized SMTP sender for the identity, ++however the authority domain is still testing out its SPF policy. ++ ++=item B<neutral> ++ ++The identity's authority domain makes no assertion about the status of the IP ++address. ++ ++=item B<permerror> ++ ++A permanent error occurred while evaluating the authority domain's policy ++(e.g., a syntax error in the SPF record). Manual intervention is required ++from the authority domain. ++ ++=item B<temperror> ++ ++A temporary error occurred while evaluating the authority domain's policy ++(e.g., a DNS error). Try again later. ++ ++=item B<none> ++ ++There is no applicable SPF policy for the identity domain. ++ ++=back ++ ++=head1 EXIT CODES ++ ++ Result | Exit code ++ -----------+----------- ++ pass | 0 ++ fail | 1 ++ softfail | 2 ++ neutral | 3 ++ permerror | 4 ++ temperror | 5 ++ none | 6 ++ ++=head1 EXAMPLES ++ ++ spfquery --scope mfrom --id user@example.com --ip 1.2.3.4 ++ spfquery --file test_data ++ echo "127.0.0.1 user@example.com helohost.example.com" | spfquery -f - ++ ++=head1 COMPATIBILITY ++ ++B<spfquery> has undergone the following interface changes compared to earlier ++versions: ++ ++=over ++ ++=item B<2.500> ++ ++=over ++ ++=item * ++ ++A new preferred usage style for performing individual SPF checks has been ++introduced. The new style accepts a unified B<--identity> option and an ++optional B<--scope> option that specifies the type (scope) of the identity. In ++contrast, the legacy usage style requires a separate usage form for every ++supported scope. See L</Preferred usage> and L</Legacy usage> for details. ++ ++=item * ++ ++The former C<unknown> and C<error> result codes have been renamed to C<permerror> ++and C<temperror>, respectively, in order to comply with RFC 4408 terminology. ++ ++=item * ++ ++SPF checks with an empty identity are no longer supported. In the case of an ++empty C<MAIL FROM> SMTP transaction parameter, perform a check with the C<helo> ++scope directly. ++ ++=item * ++ ++The B<--debug> and B<--(no-)sanitize> options are currently ignored by this ++version of B<spfquery>. They will again be supported in the future. ++ ++=item * ++ ++Several features that were supported by earlier versions of B<spfquery> are ++considered black magic and thus are now disabled by default. See L</Black ++Magic Options>. ++ ++=item * ++ ++Several option names have been deprecated. This is a list of them and their ++preferred synonyms: ++ ++ Deprecated options | Preferred options ++ ---------------------+----------------------------- ++ --sender, -s | --mfrom ++ --ipv4, -i | --ip-address, --ip ++ --name | --hostname ++ --max-lookup-count, | --max-dns-interactive-terms ++ --max-lookup | ++ --rcpt-to, -r | --authorize-mxes-for ++ --trusted | --tfwl ++ ++=back ++ ++=back ++ ++=head1 SEE ALSO ++ ++L<Mail::SPF>, L<spfd(8)> ++ ++L<http://www.ietf.org/rfc/rfc4408.txt> ++ ++=head1 AUTHORS ++ ++This version of B<spfquery> is a complete rewrite by Julian Mehnle ++<julian@mehnle.net>, based on an earlier version written by Meng Weng Wong ++<mengwong+spf@pobox.com> and Wayne Schlitt <wayne@schlitt.net>. ++ ++=cut ++ ++our $VERSION = '2.501'; ++ ++use warnings; ++use strict; ++ ++use IO::File; ++use Getopt::Long qw(:config gnu_compat no_ignore_case); ++use Error ':try'; ++use Mail::SPF; ++ ++use constant TRUE => (0 == 0); ++use constant FALSE => not TRUE; ++ ++use constant exit_codes_by_result_code => { ++ pass => 0, ++ fail => 1, ++ softfail => 2, ++ neutral => 3, ++ permerror => 4, ++ temperror => 5, ++ none => 6 ++}; ++ ++# Helper Functions ++############################################################################## ++ ++sub usage { ++ STDERR->printf(<<'EOT'); ++Preferred Usage: ++ spfquery [--versions|-v 1|2|1,2] [--scope|-s helo|mfrom|pra] ++ --identity|--id <identity> --ip-address|--ip <ip-address> ++ [--helo-identity|--helo-id <helo-identity>] [OPTIONS] ++ spfquery [--versions|-v 1|2|1,2] [--scope|-s helo|mfrom|pra] ++ --file|-f <filename>|- [OPTIONS] ++ ++Legacy Usage: ++ spfquery --helo <helo-identity> --ip-address|--ip <ip-address> [OPTIONS] ++ spfquery --mfrom <mfrom-identity> --ip-address|--ip <ip-address> ++ [--helo <helo-identity>] [OPTIONS] ++ spfquery --pra <pra-identity> --ip-address|--ip <ip-address> [OPTIONS] ++ ++Other Usage: ++ spfquery --version|-V ++ ++See `spfquery --help` for more information. ++EOT ++ return; ++} ++ ++sub help { ++ print(<<'EOT'); ++Preferred Usage: ++ spfquery [--versions|-v 1|2|1,2] [--scope|-s helo|mfrom|pra] ++ --identity|--id <identity> --ip-address|--ip <ip-address> ++ [--helo-identity|--helo-id <helo-identity>] [OPTIONS] ++ spfquery [--versions|-v 1|2|1,2] [--scope|-s helo|mfrom|pra] ++ --file|-f <filename>|- [OPTIONS] ++ ++Legacy Usage: ++ spfquery --helo <helo-identity> --ip-address|--ip <ip-address> [OPTIONS] ++ spfquery --mfrom <mfrom-identity> --ip-address|--ip <ip-address> ++ [--helo <helo-identity>] [OPTIONS] ++ spfquery --pra <pra-identity> --ip-address|--ip <ip-address> [OPTIONS] ++ ++Other Usage: ++ spfquery --version|-V ++ ++spfquery performs SPF checks based on the command-line arguments or data given ++in a file or on standard input. ++ ++Only the preferred and other usage forms are explained here. See the ++spfquery(1) man-page for an explanation of the legacy usage forms. ++ ++The "--identity" form checks if the given <ip-address> is an authorized SMTP ++sender for the given "helo" hostname, "mfrom" envelope sender e-mail address, ++or "pra" (purported resonsible address) e-mail address, depending on the value ++of the "--scope" option (which defaults to "mfrom" if omitted). ++ ++The "--file" form reads "<ip-address> <identity> [<helo-identity>]" tuples from ++the file with the specified <filename>, or from standard input if <filename> is ++"-", and checks them against the specified scope ("mfrom" by default). ++ ++The "--version" form prints version information of spfquery. ++ ++Valid OPTIONS (and their defaults) are: ++ --default-explanation <string> ++ Default explanation string to use (sensible default). ++ --hostname <hostname> ++ The name of the system doing the SPF checking (local ++ system's configured hostname). ++ --keep-comments Print comments found when reading from a file. ++ --no-sanitize Do not clean up invalid characters in output. ++ --debug Output debugging information. ++ ++Black-magic OPTIONS are: ++ --max-dns-interactive-terms <n> ++ Maximum number of DNS-interactive mechanisms and ++ modifiers (10). ++ --max-name-lookups-per-term <n> ++ Maximum number of DNS name look-ups per mechanism or ++ modifier (10). ++ --authorize-mxes-for <email-address>|<domain>,... ++ A comma-separated list of e-mail addresses and domains ++ whose MXes will be considered inherently authorized. ++ --tfwl Check trusted-forwarder.org white-list. ++ --guess <spf-terms> Default checks if no SPF record is found. ++ --local <spf-terms> Local policy to process before default result. ++ --override <domain>=<spf-record> ++ --fallback <domain>=<spf-record> ++ Set override and fallback SPF records for domains. ++ ++Examples: ++ spfquery --scope mfrom --id user@example.com --ip 1.2.3.4 ++ spfquery --file test_data ++ echo "127.0.0.1 user@example.com helohost.example.com" | spfquery -f - ++EOT ++ return; ++} ++ ++sub deprecated_option { ++ my ($old_option, $new_option, $options) = @_; ++ return FALSE if not exists($options->{$old_option}); ++ STDERR->print( ++ "Warning: '$old_option' option is deprecated" . ++ ($new_option ? "; use '$new_option' instead" : '') . ++ ".\n" ++ ); ++ $options->{$new_option} = delete($options->{$old_option}); ++ return TRUE; ++} ++ ++sub unsupported_option { ++ my ($option_name, $options) = @_; ++ return FALSE if not exists($options->{$option_name}); ++ STDERR->print("Error: '$option_name' option is no longer supported.\n"); ++ return TRUE; ++} ++ ++sub black_magic_option { ++ my ($option_name, $options) = @_; ++ return FALSE if not exists($options->{$option_name}); ++ STDERR->print("Error: '$option_name' option is black magic! Do not use it!\n"); ++ return TRUE; ++} ++ ++# Command-line Option Handling ++############################################################################## ++ ++my $options = {}; ++my $getopt_result = GetOptions( ++ $options, ++ ++ 'file|f=s', ++ ++ 'versions|v=s', ++ 'scope=s', ++ 's=s', # Special handling for ambiguous 's' option (formerly a synonym ++ # for 'sender', now preferredly a synonym for 'scope'). ++ 'identity|id=s', ++ 'ip-address|ip=s', ++ 'helo-identity|helo-id=s', ++ ++ # Legacy/shortcut options: ++ 'mfrom|mail-from|m=s', ++ 'helo|h=s', ++ ++ 'default-explanation|def-exp=s', ++ 'hostname=s', ++ ++ 'keep-comments!', ++ 'debug!', # TODO Implement! ++ 'sanitize!', # TODO Implement! ++ ++ # Black Magic options: ++ 'enable-black-magic!', ++ 'max-dns-interactive-terms=i', ++ 'max-name-lookups-per-term=i', ++ 'authorize-mxes-for=s', ++ # TODO implement! ++ 'tfwl!', # TODO Implement! ++ 'guess=s', # TODO Implement! ++ 'local=s', # TODO Implement! ++ 'override=s%', # TODO Implement! ++ 'fallback=s%', # TODO Implement! ++ ++ # Meta actions: ++ 'version|V!', ++ 'help!', ++ ++ # Deprecated options: ++ 'sender=s', # Now 'scope'/'identity' or 'mfrom' ++ 'ipv4=s', # Now 'ip-address' ++ 'i=s', # Now 'ip-address' ++ 'name=s', # Now 'hostname' ++ 'max-lookup-count=i', ++ 'max-lookup=i', # Now 'max-dns-interactive-terms' ++ 'rcpt-to=s', # Now 'authorize-mxes-for' ++ 'r=s', # Now 'authorize-mxes-for' ++ 'trusted!' # Now 'tfwl' ++); ++ ++if (not $getopt_result) { ++ usage(); ++ exit(255); ++} ++ ++if ($options->{help}) { ++ help(); ++ exit(0); ++} ++ ++if ($options->{version}) { ++ print("spfquery version $VERSION (using Mail::SPF)\n"); ++ exit(0); ++} ++ ++deprecated_option('sender', 'mfrom', $options); ++deprecated_option('ipv4', 'ip-address', $options); ++deprecated_option('i', 'ip-address', $options); ++deprecated_option('name', 'hostname', $options); ++deprecated_option('max-lookup-count', 'max-dns-interactive-terms', $options); ++deprecated_option('max-lookup', 'max-dns-interactive-terms', $options); ++deprecated_option('rcpt-to', 'authorize-mxes-for', $options); ++deprecated_option('r', 'authorize-mxes-for', $options); ++deprecated_option('trusted', 'tfwl', $options); ++ ++if ($options->{'enable-black-magic'}) { ++ if (not defined(eval('require Mail::SPF::BlackMagic'))) { ++ STDERR->print("Error: Cannot enable black magic. Unable to load Mail::SPF::BlackMagic.\n"); ++ exit(255); ++ } ++ # else: Black magic enabled! ++} ++elsif ( ++ black_magic_option('max-dns-interactive-terms', $options) or ++ black_magic_option('max-name-lookups-per-term', $options) or ++ black_magic_option('rcpt-to', $options) or ++ black_magic_option('trusted', $options) or ++ black_magic_option('guess', $options) or ++ black_magic_option('local', $options) or ++ black_magic_option('override', $options) or ++ black_magic_option('fallback', $options) ++) { ++ exit(255); ++} ++ ++my @versions = split(',', $options->{versions} || ''); ++my $scope = $options->{scope}; ++my $identity = $options->{identity}; ++my $ip_address = $options->{'ip-address'}; ++my $helo_identity = $options->{'helo-identity'}; ++ ++# Heuristic for distinguishing between 's(cope)' and 's(ender)': ++if (defined(my $s = $options->{s})) { ++ if ( ++ not defined($scope) and # No explicit 'scope' option has been specified, and ++ $s !~ /[@.]/ # 's' option contains neither an '@' nor a dot, ++ # so it cannot be an e-mail address or a domain. ++ ) { ++ # Thus it must be meant as the 'scope' option: ++ $scope = $s; ++ } ++ else { ++ # Else, it must be meant as the deprecated 'sender' option: ++ $options->{mfrom} = $s; ++ } ++} ++ ++# Heuristic for when explicit 'scope'/'s(cope)' option is absent: ++if (not defined($scope)) { ++ if (defined($identity) or defined($options->{file})) { ++ # Identity has been specified, or input will be read from file: ++ # apply the 'scope' option default: ++ $scope = 'mfrom'; ++ } ++ elsif (defined($options->{helo})) { ++ $scope = 'helo'; ++ $identity = $options->{helo}; ++ } ++ elsif (defined($options->{mfrom})) { ++ $scope = 'mfrom'; ++ $identity = $options->{mfrom}; ++ $helo_identity ||= $options->{helo}; ++ } ++ elsif (defined($options->{pra})) { ++ $scope = 'pra'; ++ $identity = $options->{pra}; ++ } ++} ++ ++my $default_explanation = $options->{'default-explanation'}; ++my $hostname = $options->{hostname}; ++ ++if ( ++ not defined($scope) or ++ not (defined($identity) xor defined($options->{file})) ++) { ++ usage(); ++ exit(255); ++} ++ ++if (defined($identity) and $identity eq '') { ++ STDERR->print("Error: Empty identities are not supported. See spfquery(1).\n"); ++ exit(255); ++} ++ ++# Process the SPF Request(s) ++############################################################################## ++ ++try { ++ my $spf_server = Mail::SPF::Server->new( ++ default_authority_explanation ++ => $default_explanation, ++ hostname => $hostname, ++ # debug => $options->{debug}, ++ # sanitize => $options->{sanitize}, ++ ++ # Black Magic: ++ ( ++ exists($options->{'max-dns-interactive-terms'}) ? ++ (max_dns_interactive_terms => $options->{'max-dns-interactive-terms'} || undef) ++ : () ++ ), ++ ( ++ exists($options->{'max-name-lookups-per-term'}) ? ++ (max_name_lookups_per_term => $options->{'max-name-lookups-per-term'} || undef) ++ : () ++ ) ++ # rcpt_to => $options->{'rcpt-to'}, ++ # trusted => $options->{trusted}, ++ # guess => $options->{guess}, ++ # local => $options->{local}, ++ # override => $options->{override}, ++ # fallback => $options->{fallback}, ++ ); ++ ++ my $exit_code; ++ ++ if (not defined($options->{file})) { ++ # Single request: ++ my $result_code = do_process( ++ $spf_server, ++ versions => @versions ? [@versions] : undef, ++ scope => $scope, ++ identity => $identity, ++ ip_address => $ip_address, ++ helo_identity => $helo_identity ++ ); ++ $exit_code = exit_codes_by_result_code->{$result_code}; ++ } ++ else { ++ # File request: ++ my $file = $options->{file} eq '-' ? \*STDIN : IO::File->new($options->{file}) ++ or die("Could not open: $options->{file}\n"); ++ while (<$file>) { ++ chomp; ++ s/^\s*//; ++ next if /^$/; ++ if (/^#/) { ++ print("$_\n") if $options->{'keep-comments'}; ++ next; ++ } ++ ($ip_address, $identity, $helo_identity) = split; ++ my $result_code = do_process( ++ $spf_server, ++ versions => @versions ? [@versions] : undef, ++ scope => $scope, ++ identity => $identity, ++ ip_address => $ip_address, ++ helo_identity => $helo_identity ++ ); ++ $exit_code ||= exit_codes_by_result_code->{$result_code}; ++ } ++ } ++ ++ exit($exit_code); ++} ++catch Mail::SPF::Exception with { ++ my ($e) = @_; ++ STDERR->printf("Error: %s.\n", $e->text); ++ exit(255); ++}; ++ ++ ++# Helper Function ++############################################################################## ++ ++sub do_process { ++ my ($spf_server, %request_options) = @_; ++ my $request = Mail::SPF::Request->new(%request_options); ++ my $result = $spf_server->process($request); ++ printf( ++ "%s\n%s\n%s\n%s\n", ++ $result->code, ++ ( ++ $result->can('authority_explanation') ? ++ $result->authority_explanation ++ : $result->local_explanation ++ ), ++ $result->local_explanation, ++ $result->received_spf_header ++ ); ++ return $result->code; ++} diff -Naur p5-Mail-SPF.dist/pkg-plist p5-Mail-SPF/pkg-plist - --- p5-Mail-SPF.dist/pkg-plist 2008-02-22 22:40:33.000000000 +0100 +++ p5-Mail-SPF/pkg-plist 2011-05-24 19:42:51.000000000 +0200 @@ -1,4 +1,4 @@ - -bin/spfquery +%%SPFQUERY%%bin/spfquery%%SPFQUERY_SUFFIX%% sbin/spfd %%SITE_PERL%%/Mail/SPF.pm %%SITE_PERL%%/Mail/SPF/MacroString.pm -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iEYEARECAAYFAk3b8gsACgkQktDgRrkFPpZRtwCfXPx95UJnmozGgWS5omw12bQM JfYAoI8UiHNF4+8Jw52Ms4sv+JRfKYpq =4nu0 -----END PGP SIGNATURE-----
Your patch got corrupted, could you try to upload it again, and someone wil= l look at it? --=20 Michael Scheidell, CTO o: 561-999-5000 d: 561-948-2259 > | SECNAP Network Security Corporation=20 * Best Mobile Solutions Product of 2011 * Best Intrusion Prevention Product * Hot Company Finalist 2011 * Best Email Security Product * Certified SNORT Integrator ______________________________________________________________________ This email has been scanned and certified safe by SpammerTrap(r). For Information please see http://www.spammertrap.com/ ______________________________________________________________________
State Changed From-To: feedback->open Feedback Timeout
Hello Mickael, hello Koen, unfortunately, there hasn't been any activity with this problem report for net/p5-Mail-SPF (see [1]) for quite a while, and both net/p5-Mail-SPF and mail/libspf2 have been modified to reflect this conflict in the meantime and prevent concurrent installation of these two ports. How should we resolve this situation? Adjust Koen's patch to modify the current version of net/p5-Mail-SPF, or leave the ports as they are now and close this PR? Best regards, Stefan [1]: http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/157107
State Changed From-To: open->feedback Awaiting feedback from submitter and maintainer.
Responsible Changed From-To: freebsd-ports-bugs->stefan Track this while waiting for feedback.
State Changed From-To: feedback->closed No reply from either the submitter or the maintainer, and the ports reflect the conflict now.
Hi, .*: Marking the packages as conflicting causes a problem in the scenario where an anti-spam checking toolchain is involved using both libspf and p5-Mail-SPF. I would be glad to look at modifying this patch and test it to get this issue resolved. Thanks, Jake Guffey Network Security Engineer eProtex Network medical device security 5451 Lakeview Parkway S Drive Indianapolis, Indiana 46268, USA Mobile: 317-220-7100 jake.guffey@eprotex.com www.eprotex.com
State Changed From-To: closed->open Re-open, as someone is looking at the issue.
This version of the patch should work without issue. It tested fine on my box using patch -p <p5-Mail-SPF.patch from within /usr/ports/mail/p5-Mail-SPF
Hello Koen, do you approve the changes in the patch (see [1]) that Jake sent? I would commit it, then... Best regards, Stefan [1]: http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/157107
State Changed From-To: open->feedback Patch received - awaiting maintainer's feedback.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Stefan, Yeah sure, commit it. I haven't got the time to check actually, and in fact had forgotten that I am listed as maintainer for this port completely. Given my current activities, I no longer can fullfill the duty of maintaining the port unfortunately. Thanks, Koen On Fri, May 10, 2013 at 12:00:48PM +0200, Stefan Walter wrote: > Hello Koen, > > do you approve the changes in the patch (see [1]) that Jake sent? I would > commit it, then... > > Best regards, > Stefan > > [1]: http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/157107 > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iEYEARECAAYFAlGPq3QACgkQktDgRrkFPpZOtACdHSpRuOEsJIjBvziI/+OTiT+J 6HAAni5KuOIUkJw0P40XHJ5gZh508D5N =m9mN -----END PGP SIGNATURE-----
Hi Koen, Koen Martens, 12.05.13, 16:47h CEST: > Hi Stefan, > > Yeah sure, commit it. I haven't got the time to check actually, and in fact > had forgotten that I am listed as maintainer for this port completely. Given > my current activities, I no longer can fullfill the duty of maintaining the > port unfortunately. thanks for the feedback! Does that mean you want to be give up maintainership of this port, then? Regards, Stefan
Hi Jake, Jake Guffey, 06.05.13, 19:50h CEST: > This version of the patch should work without issue. It tested fine on = > my box using > > patch -p <p5-Mail-SPF.patch from within /usr/ports/mail/p5-Mail-SPF thank you for the patch. I have a small issue with it: It renames the 'spfquery' script by applying a patch which, as a result, contains the whole script twice. I think it would be better to do that in the port's Makefile. Could you modify your patch in that way? Regards, Stefan
Hi, Stefan: I would love to fix the patch myself but unfortunately I am just not familiar enough with the perl's automake-like modules to be of any use. I did look into it today, and it seems like it would be a simply enough problem to fix, but I wasn't able to do it. Is there some functionality where I can execute a command via system() after the build process or similar? Thanks, Jake Guffey Network Security Engineer eProtex Network medical device security 5451 Lakeview Parkway S Drive Indianapolis, Indiana 46268, USA Mobile: 317-220-7100 jake.guffey@eprotex.com www.eprotex.com On May 12, 2013, at 11:35 AM, Stefan Walter <stefan@FreeBSD.org> wrote: > Hi Jake, > > Jake Guffey, 06.05.13, 19:50h CEST: > >> This version of the patch should work without issue. It tested fine on = >> my box using >> >> patch -p <p5-Mail-SPF.patch from within /usr/ports/mail/p5-Mail-SPF > > thank you for the patch. I have a small issue with it: It renames the > 'spfquery' script by applying a patch which, as a result, contains the > whole script twice. I think it would be better to do that in the port's > Makefile. Could you modify your patch in that way? > > Regards, > Stefan
Hi Jake, Jake Guffey, 13.05.13, 23:20h CEST: > I would love to fix the patch myself but unfortunately I am just not > familiar enough with the perl's automake-like modules to be of any use. > I did look into it today, and it seems like it would be a simply enough > problem to fix, but I wasn't able to do it. Is there some functionality > where I can execute a command via system() after the build process or > similar? I did not have a closer look at the build process of this particular port, yet, but I would have suggested renaming the file in the "post-build" or "pre-install" target of the port's Makefile (see [1]). Regards, Stefan [1]: http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/book.html#slow-work
Hi, Stefan: Thanks for the link. I was unaware of the pre/post targets. This makefile should do the trick. Thanks, Jake Guffey Network Security Engineer eProtex Network medical device security 5451 Lakeview Parkway S Drive Indianapolis, Indiana 46268, USA Mobile: 317-220-7100 jake.guffey@eprotex.com www.eprotex.com On May 13, 2013, at 5:30 PM, Stefan Walter <stefan@FreeBSD.org> wrote: > Hi Jake, > > Jake Guffey, 13.05.13, 23:20h CEST: > >> I would love to fix the patch myself but unfortunately I am just not >> familiar enough with the perl's automake-like modules to be of any use. >> I did look into it today, and it seems like it would be a simply enough >> problem to fix, but I wasn't able to do it. Is there some functionality >> where I can execute a command via system() after the build process or >> similar? > > I did not have a closer look at the build process of this particular port, > yet, but I would have suggested renaming the file in the "post-build" or > "pre-install" target of the port's Makefile (see [1]). > > Regards, > Stefan > > [1]: http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/book.html#slow-work
Hi Jake, Jake Guffey, 14.05.13, 17:10h CEST: > Hi, Stefan: > > Thanks for the link. I was unaware of the pre/post targets. This makefile should do the trick. thanks for the patch. I have made a few additional changes to it (see attachment): - Use the new way of handling OPTIONS. - Add the suffix to spfquery by default, since packages are built with defaults and this avoids the conflict with libspf2. - Add DOCS to OPTIONS, too, instead of using NOPORTDOCS. - Fix a few portlint warnings, mostly about whitespace. It builds fine on redports.org. Can you verify that this version actually works for you? (I don't use this port at all...) Since Koen stated that he cannot maintain the port any more, I will remove him from the MAINTAINER field in the Makefile. The port will be unmaintained, then. Do you want to take over maintainership? Regards, Stefan
Hi, Stefan: The patch you sent me builds without issue on my box. I am unqualified to maintain this port. Thanks, Jake Guffey Network Security Engineer eProtex Network medical device security 5451 Lakeview Parkway S Drive Indianapolis, Indiana 46268, USA Mobile: 317-220-7100 jake.guffey@eprotex.com www.eprotex.com
Author: stefan Date: Tue May 14 19:12:23 2013 New Revision: 318188 URL: http://svnweb.freebsd.org/changeset/ports/318188 Log: - Install 'spfquery' as 'spfquery.pl' by default, optionally keeping the original name. - Reset MAINTAINER. PR: 157107 Patch by: Jake Guffey <jake.guffey@eprotex.com> Approved by: Koen Martens <gmc@sonologic.nl> (former maintainer) Added: head/mail/p5-Mail-SPF/files/ head/mail/p5-Mail-SPF/files/extra-patch-no-spfquery (contents, props changed) head/mail/p5-Mail-SPF/files/extra-patch-spfquery-suffix (contents, props changed) Modified: head/mail/p5-Mail-SPF/Makefile head/mail/p5-Mail-SPF/pkg-descr head/mail/p5-Mail-SPF/pkg-plist Modified: head/mail/p5-Mail-SPF/Makefile ============================================================================== --- head/mail/p5-Mail-SPF/Makefile Tue May 14 19:09:12 2013 (r318187) +++ head/mail/p5-Mail-SPF/Makefile Tue May 14 19:12:23 2013 (r318188) @@ -3,13 +3,13 @@ PORTNAME= Mail-SPF PORTVERSION= 2.007 -PORTREVISION= 1 +PORTREVISION= 2 CATEGORIES= mail perl5 MASTER_SITES= CPAN PKGNAMEPREFIX= p5- DISTNAME= ${PORTNAME}-v${PORTVERSION} -MAINTAINER= gmc@sonologic.nl +MAINTAINER= ports@FreeBSD.org COMMENT= Reference implementation of the RFC 4408 SPF protocol RUN_DEPENDS= p5-Net-DNS-Resolver-Programmable>=0.002.1:${PORTSDIR}/dns/p5-Net-DNS-Resolver-Programmable \ @@ -20,12 +20,11 @@ RUN_DEPENDS= p5-Net-DNS-Resolver-Program p5-URI>=1.13:${PORTSDIR}/net/p5-URI BUILD_DEPENDS:= ${RUN_DEPENDS} -CONFLICTS= libspf2-[0-9]* p5-Mail-SPF-Query-[0-9]* +CONFLICTS= p5-Mail-SPF-Query-[0-9]* PERL_MODBUILD= yes CONFIGURE_ARGS= --install_path sbin=${PREFIX}/sbin -MAN1= spfquery.1 MAN3= Mail::SPF.3 Mail::SPF::Mech::PTR.3 Mail::SPF::Mech.3 \ Mail::SPF::SenderIPAddrMech.3 Mail::SPF::MacroString.3 \ Mail::SPF::Mech::IP4.3 Mail::SPF::Mech::A.3 \ @@ -37,13 +36,38 @@ MAN3= Mail::SPF.3 Mail::SPF::Mech::PTR. Mail::SPF::Base.3 Mail::SPF::Mech::All.3 Mail::SPF::Term.3 \ Mail::SPF::v1::Record.3 Mail::SPF::Mech::Exists.3 +OPTIONS_DEFINE= SPFQUERY SPFQUERY_SUFFIX DOCS +SPFQUERY_DESC= Install spfquery command-line tool +SPFQUERY_SUFFIX_DESC=Add .pl suffix to spfquery +OPTIONS_DEFAULT=SPFQUERY SPFQUERY_SUFFIX + .include <bsd.port.pre.mk> DOCSDIR= ${PREFIX}/share/doc/p5-Mail-SPF DOCS= CHANGES INSTALL LICENSE README TODO +.if ${PORT_OPTIONS:MSPFQUERY} +PLIST_SUB+= SPFQUERY="" + +.if ${PORT_OPTIONS:MSPFQUERY_SUFFIX} +PLIST_SUB+= SPFQUERY_SUFFIX=".pl" +MAN1+= spfquery.pl.1 +EXTRA_PATCHES+= ${FILESDIR}/extra-patch-spfquery-suffix +post-extract: + ${MV} ${WRKSRC}/bin/spfquery ${WRKSRC}/bin/spfquery.pl +.else +PLIST_SUB+= SPFQUERY_SUFFIX="" +MAN1+= spfquery.1 +CONFLICTS+= libspf2-[0-9]* +.endif + +.else +PLIST_SUB+= SPFQUERY="@comment " +EXTRA_PATCHES+= ${FILESDIR}/extra-patch-no-spfquery +.endif + post-install: -.if !defined(NOPORTDOCS) +.if ${PORT_OPTIONS:MDOCS} @${MKDIR} ${DOCSDIR} @${INSTALL_DATA} ${DOCS:S,^,${WRKSRC}/,} ${DOCSDIR}/ .endif Added: head/mail/p5-Mail-SPF/files/extra-patch-no-spfquery ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/mail/p5-Mail-SPF/files/extra-patch-no-spfquery Tue May 14 19:12:23 2013 (r318188) @@ -0,0 +1,33 @@ +diff -Naur orig/Build.PL Build.PL +--- orig/Build.PL 2009-10-31 23:16:14.000000000 +0100 ++++ Build.PL 2011-05-24 19:27:19.000000000 +0200 +@@ -66,7 +66,6 @@ + => 'v0.002.1', + }, + script_files => [ +- 'bin/spfquery' + ], + install_path => { + 'sbin' => '/usr/sbin' +diff -Naur orig/MANIFEST MANIFEST +--- orig/MANIFEST 2009-10-31 23:16:14.000000000 +0100 ++++ MANIFEST 2011-05-24 19:26:56.000000000 +0200 +@@ -1,4 +1,3 @@ +-bin/spfquery + Build.PL + CHANGES + debian/changelog +diff -Naur orig/README README +--- orig/README 2009-10-31 23:16:14.000000000 +0100 ++++ README 2011-05-24 19:27:05.000000000 +0200 +@@ -12,9 +12,8 @@ + This release of Mail::SPF fully conforms to RFC 4408 and passes the 2008.08 + release of the official test-suite <http://www.openspf.org/Test_Suite>. + +-The Mail::SPF source package includes the following additional tools: ++The Mail::SPF source package includes the following additional tool: + +- * spfquery: A command-line tool for performing SPF checks. + * spfd: A daemon for services that perform SPF checks frequently. + + Mail::SPF is not your mother! Added: head/mail/p5-Mail-SPF/files/extra-patch-spfquery-suffix ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/mail/p5-Mail-SPF/files/extra-patch-spfquery-suffix Tue May 14 19:12:23 2013 (r318188) @@ -0,0 +1,35 @@ +diff -Naur orig/Build.PL Build.PL +--- orig/Build.PL 2009-10-31 23:16:14.000000000 +0100 ++++ Build.PL 2011-05-24 19:40:10.000000000 +0200 +@@ -66,7 +66,7 @@ + => 'v0.002.1', + }, + script_files => [ +- 'bin/spfquery' ++ 'bin/spfquery.pl' + ], + install_path => { + 'sbin' => '/usr/sbin' +diff -Naur orig/MANIFEST MANIFEST +--- orig/MANIFEST 2009-10-31 23:16:14.000000000 +0100 ++++ MANIFEST 2011-05-24 19:40:36.000000000 +0200 +@@ -1,4 +1,4 @@ +-bin/spfquery ++bin/spfquery.pl + Build.PL + CHANGES + debian/changelog +diff -Naur orig/README README +--- orig/README 2009-10-31 23:16:14.000000000 +0100 ++++ README 2011-05-24 19:40:54.000000000 +0200 +@@ -14,8 +14,8 @@ + + The Mail::SPF source package includes the following additional tools: + +- * spfquery: A command-line tool for performing SPF checks. +- * spfd: A daemon for services that perform SPF checks frequently. ++ * spfquery.pl: A command-line tool for performing SPF checks. ++ * spfd: A daemon for services that perform SPF checks frequently. + + Mail::SPF is not your mother! + ----------------------------- Modified: head/mail/p5-Mail-SPF/pkg-descr ============================================================================== --- head/mail/p5-Mail-SPF/pkg-descr Tue May 14 19:09:12 2013 (r318187) +++ head/mail/p5-Mail-SPF/pkg-descr Tue May 14 19:12:23 2013 (r318188) @@ -9,4 +9,4 @@ The Mail::SPF source package includes th * spfquery: A command-line tool for performing SPF checks. * spfd: A daemon for services that perform SPF checks frequently. -WWW: http://www.openspf.org/ +WWW: http://www.openspf.org/ Modified: head/mail/p5-Mail-SPF/pkg-plist ============================================================================== --- head/mail/p5-Mail-SPF/pkg-plist Tue May 14 19:09:12 2013 (r318187) +++ head/mail/p5-Mail-SPF/pkg-plist Tue May 14 19:12:23 2013 (r318188) @@ -1,4 +1,4 @@ -bin/spfquery +%%SPFQUERY%%bin/spfquery%%SPFQUERY_SUFFIX%% sbin/spfd %%SITE_PERL%%/Mail/SPF.pm %%SITE_PERL%%/Mail/SPF/MacroString.pm _______________________________________________ svn-ports-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-ports-all To unsubscribe, send any mail to "svn-ports-all-unsubscribe@freebsd.org"
State Changed From-To: feedback->closed Patch was committed.
Hello. IMO only half of the problem has been addressed. While p5-Mail-SPF has been upgraded, mail/libspf2 still (always) CONFLICTs with it. bye av.
I have to agree with Andrea. Until libspf2 is fixed, the pr is only 1/2 solved. --- Makefile 2013-06-13 18:54:38.000000000 +0000 +++ Makefile.new 2013-06-14 13:46:58.086924317 +0000 @@ -13,7 +13,7 @@ LICENSE= BSD LGPL21 LGPL3 LICENSE_COMB= dual -CONFLICTS= ${PORTNAME}-1.0.* p5-Mail-SPF-[0-9]* p5-Mail-SPF-Query-[0-9]* +CONFLICTS= ${PORTNAME}-1.0.* p5-Mail-SPF-Query-[0-9]* GNU_CONFIGURE= yes USE_AUTOTOOLS= lib tool This should fix it, though. Thanks, Jake Guffey Network Security Engineer eProtex Network medical device security 5451 Lakeview Parkway S Drive Indianapolis, Indiana 46268, USA Mobile: 317-220-7100 jake.guffey@eprotex.com www.eprotex.com=
State Changed From-To: closed->open Reopen to look at the second involved port.
Hi, Jake Guffey, 14.06.13, 15:49h CEST: > I have to agree with Andrea. Until libspf2 is fixed, the pr is only 1/2 solved. > > --- Makefile 2013-06-13 18:54:38.000000000 +0000 > +++ Makefile.new 2013-06-14 13:46:58.086924317 +0000 > @@ -13,7 +13,7 @@ > LICENSE= BSD LGPL21 LGPL3 > LICENSE_COMB= dual > > -CONFLICTS= ${PORTNAME}-1.0.* p5-Mail-SPF-[0-9]* p5-Mail-SPF-Query-[0-9]* > +CONFLICTS= ${PORTNAME}-1.0.* p5-Mail-SPF-Query-[0-9]* > > GNU_CONFIGURE= yes > USE_AUTOTOOLS= lib tool > > This should fix it, though. hm...strictly speaking, there is still the case in which p5-Mail-SPF is installed with a spfquery that is not renamed. I guess it should just be renamed unconditionally to never conflict... Best regards, Stefan
Author: stefan Date: Sun Jun 16 18:16:16 2013 New Revision: 321065 URL: http://svnweb.freebsd.org/changeset/ports/321065 Log: - Let mail/p5-Mail-SPF always install spfquery as spfquery.pl unconditionally to avoid conflict with mail/libspf2. - Unregister conflict between mail/p5-Mail-SPF and mail/libspf2. PR: 157107 Added: head/mail/p5-Mail-SPF/files/patch-spfquery-suffix - copied unchanged from r318188, head/mail/p5-Mail-SPF/files/extra-patch-spfquery-suffix Deleted: head/mail/p5-Mail-SPF/files/extra-patch-no-spfquery head/mail/p5-Mail-SPF/files/extra-patch-spfquery-suffix Modified: head/mail/libspf2/Makefile head/mail/p5-Mail-SPF/Makefile head/mail/p5-Mail-SPF/pkg-plist Modified: head/mail/libspf2/Makefile ============================================================================== --- head/mail/libspf2/Makefile Sun Jun 16 18:06:18 2013 (r321064) +++ head/mail/libspf2/Makefile Sun Jun 16 18:16:16 2013 (r321065) @@ -3,6 +3,7 @@ PORTNAME= libspf2 PORTVERSION= 1.2.10 +PORTREVISION= 1 CATEGORIES= mail MASTER_SITES= http://www.libspf2.org/spf/ \ LOCAL/sunpoet @@ -13,7 +14,7 @@ COMMENT= Sender Rewriting Scheme 2 C Imp LICENSE= BSD LGPL21 LGPL3 LICENSE_COMB= dual -CONFLICTS= ${PORTNAME}-1.0.* p5-Mail-SPF-[0-9]* p5-Mail-SPF-Query-[0-9]* +CONFLICTS= ${PORTNAME}-1.0.* p5-Mail-SPF-Query-[0-9]* GNU_CONFIGURE= yes USE_AUTOTOOLS= libtool Modified: head/mail/p5-Mail-SPF/Makefile ============================================================================== --- head/mail/p5-Mail-SPF/Makefile Sun Jun 16 18:06:18 2013 (r321064) +++ head/mail/p5-Mail-SPF/Makefile Sun Jun 16 18:16:16 2013 (r321065) @@ -3,7 +3,7 @@ PORTNAME= Mail-SPF PORTVERSION= 2.007 -PORTREVISION= 2 +PORTREVISION= 3 CATEGORIES= mail perl5 MASTER_SITES= CPAN PKGNAMEPREFIX= p5- @@ -25,6 +25,7 @@ CONFLICTS= p5-Mail-SPF-Query-[0-9]* PERL_MODBUILD= yes CONFIGURE_ARGS= --install_path sbin=${PREFIX}/sbin +MAN1= spfquery.pl.1 MAN3= Mail::SPF.3 Mail::SPF::Mech::PTR.3 Mail::SPF::Mech.3 \ Mail::SPF::SenderIPAddrMech.3 Mail::SPF::MacroString.3 \ Mail::SPF::Mech::IP4.3 Mail::SPF::Mech::A.3 \ @@ -36,35 +37,15 @@ MAN3= Mail::SPF.3 Mail::SPF::Mech::PTR. Mail::SPF::Base.3 Mail::SPF::Mech::All.3 Mail::SPF::Term.3 \ Mail::SPF::v1::Record.3 Mail::SPF::Mech::Exists.3 -OPTIONS_DEFINE= SPFQUERY SPFQUERY_SUFFIX DOCS -SPFQUERY_DESC= Install spfquery command-line tool -SPFQUERY_SUFFIX_DESC=Add .pl suffix to spfquery -OPTIONS_DEFAULT=SPFQUERY SPFQUERY_SUFFIX +OPTIONS_DEFINE= DOCS .include <bsd.port.pre.mk> DOCSDIR= ${PREFIX}/share/doc/p5-Mail-SPF DOCS= CHANGES INSTALL LICENSE README TODO -.if ${PORT_OPTIONS:MSPFQUERY} -PLIST_SUB+= SPFQUERY="" - -.if ${PORT_OPTIONS:MSPFQUERY_SUFFIX} -PLIST_SUB+= SPFQUERY_SUFFIX=".pl" -MAN1+= spfquery.pl.1 -EXTRA_PATCHES+= ${FILESDIR}/extra-patch-spfquery-suffix post-extract: ${MV} ${WRKSRC}/bin/spfquery ${WRKSRC}/bin/spfquery.pl -.else -PLIST_SUB+= SPFQUERY_SUFFIX="" -MAN1+= spfquery.1 -CONFLICTS+= libspf2-[0-9]* -.endif - -.else -PLIST_SUB+= SPFQUERY="@comment " -EXTRA_PATCHES+= ${FILESDIR}/extra-patch-no-spfquery -.endif post-install: .if ${PORT_OPTIONS:MDOCS} Copied: head/mail/p5-Mail-SPF/files/patch-spfquery-suffix (from r318188, head/mail/p5-Mail-SPF/files/extra-patch-spfquery-suffix) ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/mail/p5-Mail-SPF/files/patch-spfquery-suffix Sun Jun 16 18:16:16 2013 (r321065, copy of r318188, head/mail/p5-Mail-SPF/files/extra-patch-spfquery-suffix) @@ -0,0 +1,35 @@ +diff -Naur orig/Build.PL Build.PL +--- orig/Build.PL 2009-10-31 23:16:14.000000000 +0100 ++++ Build.PL 2011-05-24 19:40:10.000000000 +0200 +@@ -66,7 +66,7 @@ + => 'v0.002.1', + }, + script_files => [ +- 'bin/spfquery' ++ 'bin/spfquery.pl' + ], + install_path => { + 'sbin' => '/usr/sbin' +diff -Naur orig/MANIFEST MANIFEST +--- orig/MANIFEST 2009-10-31 23:16:14.000000000 +0100 ++++ MANIFEST 2011-05-24 19:40:36.000000000 +0200 +@@ -1,4 +1,4 @@ +-bin/spfquery ++bin/spfquery.pl + Build.PL + CHANGES + debian/changelog +diff -Naur orig/README README +--- orig/README 2009-10-31 23:16:14.000000000 +0100 ++++ README 2011-05-24 19:40:54.000000000 +0200 +@@ -14,8 +14,8 @@ + + The Mail::SPF source package includes the following additional tools: + +- * spfquery: A command-line tool for performing SPF checks. +- * spfd: A daemon for services that perform SPF checks frequently. ++ * spfquery.pl: A command-line tool for performing SPF checks. ++ * spfd: A daemon for services that perform SPF checks frequently. + + Mail::SPF is not your mother! + ----------------------------- Modified: head/mail/p5-Mail-SPF/pkg-plist ============================================================================== --- head/mail/p5-Mail-SPF/pkg-plist Sun Jun 16 18:06:18 2013 (r321064) +++ head/mail/p5-Mail-SPF/pkg-plist Sun Jun 16 18:16:16 2013 (r321065) @@ -1,4 +1,4 @@ -%%SPFQUERY%%bin/spfquery%%SPFQUERY_SUFFIX%% +bin/spfquery.pl sbin/spfd %%SITE_PERL%%/Mail/SPF.pm %%SITE_PERL%%/Mail/SPF/MacroString.pm _______________________________________________ svn-ports-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-ports-all To unsubscribe, send any mail to "svn-ports-all-unsubscribe@freebsd.org"
State Changed From-To: open->closed The mail/p5-Mail-SPF port now always installs spfquery as spfquery.pl. Conflict with mail/libspf2 has been removed.