Add www/squid31, a port of the current 3.1 development branch which is currently in beta testing. The port should be added via a repocopy from www/squid30. The patch to update www/squid30 to www/squid31 is attached below. Removed file in www/squid31: files/patch-squid_kerb_auth Fix: Upgrade patch from squid30 to squid31:
Responsible Changed From-To: freebsd-ports-bugs->miwi I'll take it.
State Changed From-To: open->repocopy - Please repocopy www/squid30 to www/squid31
Responsible Changed From-To: miwi->portmgr Over to portmgr
State Changed From-To: repocopy->open Repocopy complete.
Responsible Changed From-To: portmgr->miwi Repocopy complete.
State Changed From-To: open->feedback Moin, patch reject here: Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |Index: Makefile |=================================================================== |--- Makefile (.../squid30) (revision 1611) |+++ Makefile (.../squid31) (revision 1611) -------------------------- Patching file Makefile using Plan A... Hunk #1 succeeded at 14. Hunk #2 succeeded at 48. Hunk #3 failed at 62. Hunk #4 failed at 83. Hunk #5 succeeded at 111. Hunk #6 succeeded at 130. Hunk #7 succeeded at 142. Hunk #8 succeeded at 168. Hunk #9 succeeded at 193. Hunk #10 succeeded at 212. Hunk #11 succeeded at 254. Hunk #12 succeeded at 278. Hunk #13 succeeded at 314. Hunk #14 succeeded at 353. Hunk #15 succeeded at 394. Hunk #16 succeeded at 406. Hunk #17 succeeded at 428. 2 out of 17 hunks failed--saving rejects to Makefile.rej Hmm... The next patch looks like a unified diff to me.. could you please take a look?
* miwi@FreeBSD.org (miwi@FreeBSD.org): > patch reject here: > > Hmm... Looks like a unified diff to me... The text leading up to this > was: -------------------------- |Index: Makefile > |=================================================================== > |--- Makefile (.../squid30) (revision 1611) |+++ Makefile > (.../squid31) (revision 1611) -------------------------- Patching file > Makefile using Plan A... Hunk #1 succeeded at 14. Hunk #2 succeeded at > 48. Hunk #3 failed at 62. Hunk #4 failed at 83. Hunk #5 succeeded at > 111. Hunk #6 succeeded at 130. Hunk #7 succeeded at 142. Hunk #8 > succeeded at 168. Hunk #9 succeeded at 193. Hunk #10 succeeded at 212. > Hunk #11 succeeded at 254. Hunk #12 succeeded at 278. Hunk #13 > succeeded at 314. Hunk #14 succeeded at 353. Hunk #15 succeeded at > 394. Hunk #16 succeeded at 406. Hunk #17 succeeded at 428. 2 out of > 17 hunks failed--saving rejects to Makefile.rej Hmm... The next patch > looks like a unified diff to me.. > > could you please take a look? Hm, probably caused by the differences between 3.0.15 and 3.0.16 and the recent MASTER_SITE_SUBDIR change. Updated patch: Index: Makefile =================================================================== --- Makefile (.../squid30) (revision 1635) +++ Makefile (.../squid31) (revision 1635) @@ -14,25 +14,15 @@ # define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment # before you start the update or installation of this port. # -# SQUID_LANGUAGES -# A list of languages for which error page files should be installed -# (default: all available) +# Note: +# Starting with Squid 3.1 SQUID_LANGUAGES and SQUID_DEFAULT_LANG are no longer +# available and will be ignored. # -# E.g. use `make SQUID_LANGUAGES="English French"' if you want to -# install the files for these languages only. -# Use `make -VSQUID_LANGUAGES' or scroll down to this variable's -# definition to see which values are valid. -# -# SQUID_DEFAULT_LANG -# If you define SQUID_LANGUAGES, select which language should be the default -# one (this variable defaults to "templates"). This setting can be overwritten -# with squid.conf's error_directory directive. -# # SQUID_CONFIGURE_ARGS # Additional configuration options. # # To enable them, use e.g -# `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install' +# `make SQUID_CONFIGURE_ARGS="--enable-ntml-fail-open" install' # # The list below may be incomplete, please see the configure script # in the Squid source distribution for the complete list of additional @@ -58,10 +48,12 @@ # to indicate variance within an accelerator setup. Typically used # together with other code that adds custom HTTP headers to the # requests. +# --disable-loadable-modules +# Do not support loadable modules. PORTNAME= squid -PORTVERSION= 3.0.${SQUID_STABLE_VER} -CATEGORIES= www +PORTVERSION= 3.1.0.${SQUID_BETA_VER} +CATEGORIES= www ipv6 MASTER_SITES= ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \ ftp://mirrors.24-7-solutions.net/pub/squid/%SUBDIR%/ \ ftp://ftp.belnet.be/packages/squid/pub/%SUBDIR%/ \ @@ -70,17 +62,17 @@ ftp://ftp.ntua.gr/pub/www/Squid/%SUBDIR%/ \ ftp://ftp.ccs.neu.edu/pub/mirrors/squid.nlanr.net/pub/%SUBDIR%/ \ ${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid/&,} \ - http://www.squid-cache.org/Versions/v3/3.0/ \ - http://www3.us.squid-cache.org/Versions/v3/3.0/ \ - http://www1.at.squid-cache.org/Versions/v3/3.0/ \ - http://www2.nl.squid-cache.org/Versions/v3/3.0/ \ - http://www1.ru.squid-cache.org/Versions/v3/3.0/ \ - http://www1.uk.squid-cache.org/Versions/v3/3.0/ \ - http://www1.jp.squid-cache.org/Versions/v3/3.0/ \ - http://www2.tw.squid-cache.org/Versions/v3/3.0/ + http://www.squid-cache.org/Versions/v3/3.1/ \ + http://www3.us.squid-cache.org/Versions/v3/3.1/ \ + http://www1.at.squid-cache.org/Versions/v3/3.1/ \ + http://www2.nl.squid-cache.org/Versions/v3/3.1/ \ + http://www1.ru.squid-cache.org/Versions/v3/3.1/ \ + http://www1.uk.squid-cache.org/Versions/v3/3.1/ \ + http://www1.jp.squid-cache.org/Versions/v3/3.1/ \ + http://www2.tw.squid-cache.org/Versions/v3/3.1/ MASTER_SITE_SUBDIR= squid -DISTNAME= squid-3.0.STABLE${SQUID_STABLE_VER} -DIST_SUBDIR= squid3.0 +DISTNAME= squid-3.1.0.${SQUID_BETA_VER} +DIST_SUBDIR= squid3.1 PATCH_SITES= http://www.squid-cache.org/%SUBDIR%/ \ http://www2.us.squid-cache.org/%SUBDIR%/ \ @@ -91,17 +83,17 @@ http://www1.uk.squid-cache.org/%SUBDIR%/ \ http://www1.jp.squid-cache.org/%SUBDIR%/ \ http://www1.tw.squid-cache.org/%SUBDIR%/ -PATCH_SITE_SUBDIR= Versions/v3/3.0/changesets -PATCHFILES= b9052.patch +PATCH_SITE_SUBDIR= Versions/v3/3.1/changesets +PATCHFILES= MAINTAINER= tmseck@web.de -COMMENT= HTTP Caching Proxy +COMMENT= HTTP Caching Proxy (BETA Version) -LATEST_LINK= squid30 +LATEST_LINK= squid31 -SQUID_STABLE_VER= 16 +SQUID_BETA_VER= 8 -CONFLICTS= squid-2.[0-9].* squid-3.[^0].* cacheboy-[0-9]* +CONFLICTS= squid-2.[0-9].* squid-3.[^1].* cacheboy-[0-9]* GNU_CONFIGURE= yes USE_BZIP2= yes USE_PERL5= yes @@ -119,13 +111,13 @@ OPTIONS= SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \ SQUID_SASL_AUTH "Install SASL authentication helpers" off \ + SQUID_IPV6 "Enable IPv6 support" on \ SQUID_DELAY_POOLS "Enable delay pools" off \ SQUID_SNMP "Enable SNMP support" on \ - SQUID_CARP "Enable CARP support" on \ SQUID_SSL "Enable SSL support for reverse proxies" off \ SQUID_PINGER "Install the icmp helper" off \ SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \ - SQUID_HTCP "Enable HTCP support" off \ + SQUID_HTCP "Enable HTCP support" on \ SQUID_VIA_DB "Enable forward/via database" off \ SQUID_CACHE_DIGESTS "Enable cache digests" off \ SQUID_WCCP "Enable Web Cache Coordination Prot. v1" on \ @@ -138,6 +130,8 @@ SQUID_IPFW "Enable transparent proxying with IPFW" off \ SQUID_PF "Enable transparent proxying with PF" off \ SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \ + SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \ + SQUID_ECAP "En. loadable content adaptation modules" off \ SQUID_ICAP "Enable ICAP client functionality" off \ SQUID_ESI "Enable ESI support (experimental)" off \ SQUID_AUFS "Enable the aufs storage scheme" off \ @@ -148,8 +142,12 @@ SQUID_DEBUG "Enable debugging options" off etc_files= squid/cachemgr.conf.default \ - squid/mib.txt squid/mime.conf.default \ - squid/msntauth.conf.default squid/squid.conf.default + squid/errorpage.css.default \ + squid/mib.txt \ + squid/mime.conf.default \ + squid/msntauth.conf.default \ + squid/squid.conf.default \ + squid/squid.conf.documented icon_files= anthony-binhex.gif anthony-bomb.gif anthony-box.gif \ anthony-box2.gif anthony-c.gif anthony-compressed.gif \ @@ -170,11 +168,23 @@ ERR_ICAP_FAILURE ERR_INVALID_REQ ERR_INVALID_RESP \ ERR_INVALID_URL ERR_LIFETIME_EXP ERR_NO_RELAY \ ERR_ONLY_IF_CACHED_MISS ERR_READ_ERROR ERR_READ_TIMEOUT \ - ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \ + ERR_SECURE_CONNECT_FAIL ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE \ + ERR_TOO_BIG ERR_UNSUP_REQ ERR_UNSUP_HTTPVERSION \ ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT +# XXX: +# This is a workaround for the problem that this file does not exist +# in the "old-style" error directories (errors/<Language>). +error_files_new_only= ERR_FTP_LISTING +error_dirs_old= Hebrew Hungarian Korean Lithuanian Polish Portuguese \ + Slovak Traditional_Chinese + +error_dirs_new= ar az bg ca cs da de el en en-au en-gb en-nz en-us es et \ + fa fi fr hy id it ja lv nl pt-br ro ru sr sv tr uk uz zh-cn \ + templates + libexec= cachemgr.cgi digest_pw_auth diskd ip_user_check \ - msnt_auth ncsa_auth ntlm_auth pam_auth smb_auth \ + msnt_auth ncsa_auth ntlm_smb_lm_auth pam_auth smb_auth \ smb_auth.sh squid_db_auth squid_radius_auth squid_session \ squid_unix_group wbinfo_group.pl .if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == "" @@ -183,6 +193,18 @@ sbin= RunAccel RunCache squidclient squid +# XXX: +# Squid 3.1 changed the default for the pid file location from +# ${localstatedir}/logs/squid.pid to ${localstatedir}/squid.pid. +# +# There are two ways to tackle this: +# 1) enforce the old default using --with-pidfile=${PREFIX}/squid/logs/squid.pid +# 2) accept the new default (and hardwire it here as well) and make sure +# that ${localstatedir} is writable by the Squid master process. (It +# used not to be, unless the Squid master process had root privileges +# or ${localstatedir}'s ACL is modified (chgrp squid; chmod g+w).) +# This is what we do now, see also files/pkg-install.in. + CONFIGURE_ARGS= --with-default-user=${SQUID_UID} \ --bindir=${PREFIX}/sbin \ --sbindir=${PREFIX}/sbin \ @@ -190,6 +212,8 @@ --libexecdir=${PREFIX}/libexec/squid \ --localstatedir=${PREFIX}/squid \ --sysconfdir=${PREFIX}/etc/squid \ + --with-logdir=${PREFIX}/squid/logs \ + --with-pidfile=${PREFIX}/squid/squid.pid \ --enable-removal-policies="lru heap" \ --disable-linux-netfilter \ --disable-linux-tproxy \ @@ -230,17 +254,18 @@ --enable-basic-auth-helpers="${basic_auth}" \ --enable-digest-auth-helpers="${digest_auth}" \ --enable-external-acl-helpers="${external_acl}" \ - --enable-ntlm-auth-helpers="SMB" + --enable-ntlm-auth-helpers="smb_lm" .if !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS) -# XXX This currently only works with heimdal from the base system, -# see files/patch-squid_kerb_auth: CONFIGURE_ARGS+= --enable-negotiate-auth-helpers="squid_kerb_auth" -libexec+= squid_kerb_auth +# XXX: +# these files moved from libexec to sbin : Bug or Feature? +sbin+= negotiate_kerb_auth negotiate_kerb_auth_test \ + squid_kerb_auth squid_kerb_auth_test .endif # Storage schemes: -storage_schemes= ufs diskd null +storage_schemes= ufs diskd .if defined(WITH_SQUID_AUFS) storage_schemes+= aufs # Only document switching from libpthread to libthr using libmap.conf @@ -253,23 +278,23 @@ CFLAGS+= ${PTHREAD_CFLAGS} .endif .if defined(WITH_SQUID_COSS) -# Starting with 3.0.STABLE9, COSS is disabled in Squid-3 until fixes -# from the 2.x series are backported to 3.x. -# storage_schemes+= coss +# COSS is currently disabled in Squid-3 until fixes from the 2.x series are +# backported to 3.x. +#storage_schemes+= coss .endif CONFIGURE_ARGS+= --enable-storeio="${storage_schemes}" # Other options set via 'make config': +.if defined(WITHOUT_SQUID_IPV6) || defined(WITHOUT_IPV6) +CONFIGURE_ARGS+= --disable-ipv6 +.endif .if defined(WITH_SQUID_DELAY_POOLS) CONFIGURE_ARGS+= --enable-delay-pools .endif .if defined(WITHOUT_SQUID_SNMP) CONFIGURE_ARGS+= --disable-snmp .endif -.if defined(WITHOUT_SQUID_CARP) -CONFIGURE_ARGS+= --disable-carp -.endif .if defined(WITH_SQUID_SSL) # we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only # works when it is defined before bsd.port{.pre}.mk is .included. @@ -289,8 +314,8 @@ CONFIGURE_ARGS+= --disable-internal-dns libexec+= dnsserver .endif -.if defined(WITH_SQUID_HTCP) -CONFIGURE_ARGS+= --enable-htcp +.if defined(WITHOUT_SQUID_HTCP) +CONFIGURE_ARGS+= --disable-htcp .endif .if defined(WITH_SQUID_VIA_DB) CONFIGURE_ARGS+= --enable-forw-via-db @@ -328,6 +353,15 @@ .if defined(WITH_SQUID_IPFILTER) CONFIGURE_ARGS+= --enable-ipf-transparent .endif +.if defined(WITH_SQUID_FOLLOW_XFF) +CONFIGURE_ARGS+= --enable-follow-x-forwarded-for +.endif +.if defined(WITH_SQUID_ECAP) +CONFIGURE_ARGS+= --enable-ecap +LIB_DEPENDS+= ecap:${PORTSDIR}/www/libecap +CFLAGS+= -I${LOCALBASE}/include +LDFLAGS+= -L${LOCALBASE}/lib +.endif .if defined(WITH_SQUID_ICAP) CONFIGURE_ARGS+= --enable-icap-client .endif @@ -360,20 +394,6 @@ CONFIGURE_ARGS+= --disable-optimizations WITH_DEBUG?= yes .endif -# Languages: -# -# If you do not define SQUID_LANGUAGES yourself, all available language files -# will be installed; the default language will be English. -SQUID_LANGUAGES?= Armenian Azerbaijani Bulgarian Catalan Czech Danish \ - Dutch English Estonian Finnish French German Greek \ - Hebrew Hungarian Italian Japanese Korean Lithuanian \ - Polish Portuguese Romanian Russian-1251 Russian-koi8-r \ - Serbian Simplify_Chinese Slovak Spanish Swedish \ - Traditional_Chinese Turkish Ukrainian-1251 \ - Ukrainian-koi8-u Ukrainian-utf8 -SQUID_DEFAULT_LANG?= templates -CONFIGURE_ARGS+= --enable-err-languages="${SQUID_LANGUAGES}" \ - --enable-default-err-language=${SQUID_DEFAULT_LANG} # Finally, add additional user specified configuration options: CONFIGURE_ARGS+= ${SQUID_CONFIGURE_ARGS} @@ -386,10 +406,15 @@ PLIST_FILES= ${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \ ${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,} -.for d in ${SQUID_LANGUAGES} templates +.for d in ${error_dirs_old} PLIST_DIRS+= etc/squid/errors/${d} PLIST_FILES+= ${error_files:S,^,etc/squid/errors/${d}/,} .endfor +.for d in ${error_dirs_new} +PLIST_DIRS+= etc/squid/errors/${d} +PLIST_FILES+= ${error_files:S,^,etc/squid/errors/${d}/,} +PLIST_FILES+= ${error_files_new_only:S,^,etc/squid/errors/${d}/,} +.endfor PLIST_DIRS+= etc/squid/errors etc/squid squid/logs squid/cache squid post-patch: @@ -403,13 +428,6 @@ # Prevent installation of .orig files by deleting them. @${FIND} ${WRKSRC} -name '*.bak' -delete @${FIND} ${WRKSRC} -name '*.orig' -delete -# XXX: -# Remove error pages that were prematurely integrated into 3.0.STABLE. -# This is done to keep the package list manageable by installing the same -# set of error files for every language: - @for d in Ukrainian-1251 Ukrainian-koi8-u Ukrainian-utf8 templates; \ - do ${RM} -f ${WRKSRC}/errors/$${d}/ERR_SECURE_CONNECT_FAIL; \ - done pre-su-install: @${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \ Index: distinfo =================================================================== --- distinfo (.../squid30) (revision 1635) +++ distinfo (.../squid31) (revision 1635) @@ -1,6 +1,3 @@ -MD5 (squid3.0/squid-3.0.STABLE16.tar.bz2) = aa039a2c75404a496f0e99a278599e00 -SHA256 (squid3.0/squid-3.0.STABLE16.tar.bz2) = a1da48a7b9824f05b67b900ff1317e755e7749a545db0c62db45219bf0f6ae3e -SIZE (squid3.0/squid-3.0.STABLE16.tar.bz2) = 1796458 -MD5 (squid3.0/b9052.patch) = 8039be92fb6ca5a71dd11b7d99c841fa -SHA256 (squid3.0/b9052.patch) = dc78622e992816f8808d83c79045eec6f64fc7c7fe5cd2bb593613af655d56be -SIZE (squid3.0/b9052.patch) = 1488 +MD5 (squid3.1/squid-3.1.0.8.tar.bz2) = 468fc9677a8771f9423ddb15fcd2e03d +SHA256 (squid3.1/squid-3.1.0.8.tar.bz2) = 57964f7d5f9fe9cf37a4178807c169b714335ce132f7f53aee894a638a19d735 +SIZE (squid3.1/squid-3.1.0.8.tar.bz2) = 2345063 Index: pkg-descr =================================================================== --- pkg-descr (.../squid30) (revision 1635) +++ pkg-descr (.../squid31) (revision 1635) @@ -7,4 +7,7 @@ By using the lightweight Internet Cache Protocol, Squid caches can be arranged in a hierarchy or mesh for additional bandwidth savings. +NOTE: This is a beta version. Stable Squid versions are located in + www/squid (2.7 series) and www/squid30 (3.0 series). + WWW: http://www.squid-cache.org/ Index: files/pkg-deinstall.in =================================================================== --- files/pkg-deinstall.in (.../squid30) (revision 1635) +++ files/pkg-deinstall.in (.../squid31) (revision 1635) @@ -8,7 +8,7 @@ case $2 in DEINSTALL) cd ${PKG_PREFIX}/etc/squid || exit 1 - for f in cachemgr.conf mime.conf msntauth.conf squid.conf; do + for f in cachemgr.conf errorpage.css mime.conf msntauth.conf squid.conf; do cmp -s -z ${f} ${f}.default && rm ${f} done ;; Index: files/pkg-message.in =================================================================== --- files/pkg-message.in (.../squid30) (revision 1635) +++ files/pkg-message.in (.../squid31) (revision 1635) @@ -24,8 +24,11 @@ Note: If you just updated your Squid installation from an earlier version, - make sure to check your Squid configuration against the 3.0 default + make sure to check your Squid configuration against the 3.1 default configuration file %%PREFIX%%/etc/squid/squid.conf.default. + + %%PREFIX%%/etc/squid/squid.conf.documented is a fully annotated + configuration file you can consult for further reference. Additionally, you should check your configuration by calling 'squid -f /path/to/squid.conf -k parse' before starting Squid. Index: files/pkg-install.in =================================================================== --- files/pkg-install.in (.../squid30) (revision 1635) +++ files/pkg-install.in (.../squid31) (revision 1635) @@ -50,6 +50,18 @@ echo "I will use the existing user '${squid_user}':" fi pw usershow ${squid_user} + # Starting with 3.1, Squid's PID file moved from + # ${squid_base}/logs/squid.pid to ${squid_base}/squid.pid. + # Since we usually start the Squid master process as ${squid_user}, + # make sure that ${squid_base} is writable for it. + if [ ! -d ${squid_base} ]; then + echo "Creating ${squid_base}..." + install -d -o root -g ${squid_group} \ + -m 0775 ${squid_base} + else + chgrp ${squid_group} ${squid_base} + chmod g+w ${squid_base} + fi for dir in cache logs; do if [ ! -d ${squid_base}/${dir} ]; then echo "Creating ${squid_base}/${dir}..." @@ -64,7 +76,7 @@ fi ;; POST-INSTALL) - for file in cachemgr.conf mime.conf squid.conf; do + for file in cachemgr.conf errorpage.css mime.conf msntauth.conf squid.conf; do if [ ! -f ${squid_confdir}/${file} \ -a -f ${squid_confdir}/${file}.default ]; then echo "Creating ${file} from default..." Index: files/squid.in =================================================================== --- files/squid.in (.../squid30) (revision 1635) +++ files/squid.in (.../squid31) (revision 1635) @@ -37,10 +37,9 @@ load_rc_config ${name} -squid_chdir=${squid_chdir:-"%%PREFIX%%/squid/logs"} +squid_chdir=${squid_chdir:-"%%PREFIX%%/squid"} squid_enable=${squid_enable:-"NO"} -squid_flags=${squid_flags-"-D"} -squid_pidfile=${squid_pidfile:-"%%PREFIX%%/squid/logs/squid.pid"} +squid_pidfile=${squid_pidfile:-"%%PREFIX%%/squid/squid.pid"} squid_user=${squid_user:-%%SQUID_UID%%} default_config=%%PREFIX%%/etc/squid/squid.conf
State Changed From-To: feedback->closed Committed. Thanks!
miwi 2009-07-07 07:46:48 UTC FreeBSD ports repository Modified files: www Makefile www/squid31 Makefile distinfo pkg-descr www/squid31/files pkg-deinstall.in pkg-install.in pkg-message.in squid.in Log: - Update to 3.1.0.8 - Connect to the build PR: 135572 Submitted by: Thomas-Martin Seck <tmseck@web.de> (maintainer) Revision Changes Path 1.2391 +1 -0 ports/www/Makefile 1.229 +91 -73 ports/www/squid31/Makefile 1.175 +3 -6 ports/www/squid31/distinfo 1.4 +2 -2 ports/www/squid31/files/pkg-deinstall.in 1.4 +14 -2 ports/www/squid31/files/pkg-install.in 1.8 +4 -1 ports/www/squid31/files/pkg-message.in 1.4 +3 -4 ports/www/squid31/files/squid.in 1.18 +3 -0 ports/www/squid31/pkg-descr _______________________________________________ cvs-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/cvs-all To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org"