my snd_hda doesn't identified after sound mega-commit )) http://docs.freebsd.org/cgi/mid.cgi?200906071912.n57JC9GZ002423 but it was able to boot FreeBSD 8.0-CURRENT #1: Sun Jun 21 01:56:38 IRKST 2009 root@s.fbsdh.ru:/usr/src/sys/amd64/compile/TEST WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2009.16-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x40fb2 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> real memory = 3221225472 (3072 MB) avail memory = 3100557312 (2956 MB) ACPI APIC Table: <Nvidia ASUSACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <Nvidia ASUSACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bfdb0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at ompatible display> port 0xac00-0xacff mem 0xe0000000-0xefffffff,0xfdfe0000-0xfdfeffff irq 16 at device 0.0 on pci1 drm0: <ATI Ra Initialized radeon 1.29.0 20080528 hdac0: <ATI RV770 High Definition Audio Controller> mem 0xfdffc000-0xfdffffff irq 16 at device 0.1 on pci1 hdac0: HDA Driver Revision: 20090614_0135 hdac0: [ITHREAD] hdac0: [ITHREAD] pci0: <memory, RAM> at device 8.0 (no driver attached) isab0: <PCI-ISA bridge> at device 9.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 9.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 10.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 10.1 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <EHCI (generic) USB 2.0 controller> on ehci0 atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 12.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 23 at device 13.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 20 at device 13.1 on pci0 atapci2: [ITHREAD] ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci2 ata5: [ITHREAD] atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f mem 0xfe02b000-0xfe02bfff irq 21 at device 13.2 on pci0 atapci3: [ITHREAD] ata6: <ATA channel 0> on atapci3 ata6: [ITHREAD] ata7: <ATA channel 1> on atapci3 ata7: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pciio Controller> mem 0xfe020000-0xfe023fff irq 22 at device 14.1 on pci0 hdac1: HDA Driver Revision: 20090614_0135 hdac1: [ITHREAD] nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at device 16.0 on pci0 miibus0: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: Ethernet address: 00:1a:92:98:2d:38 nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe1: f irq 20 at device 17.0 on pci0 miibus1: <MII bus> on nfe1 e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe1: Ethernet address: 00:1a:92:98:31:94 nfe1: ected Reference 20090521 nspredef-1058 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (bd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 device_attach: powernow0 attach returned 6 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 dull Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <nVidia> at usbus0 uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <nVidia> at usbus1 uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbuDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0 hdac1: HDA Codec #0: Analog Devices AD1988B hdac1: unable to allocate widgets! last message repeated 43 times hdac1: unable to allocate widgets! last message repeated 43 times hdac1: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0 last message repeated 284 times ad12s2: geometry does not match label (255h,63s != 16h,63s). uhub1: 8 ports with 8 removable, self powered GEOM_JOURNAL: Journal 2397757434: ad12s1f contains data. GEOM_JOURNAL: Journal 2397757434: ad12s1f contains journal. GEOM_JOURNAL: : 8 buttons and [XYZ] coordinates ID=0 pciconf -lv none@pci0:0:14:1: class=0x040300 card=0x822d1043 chip=0x037110de rev=0xa2 hdr=0x00 vendor = 'Nvidia Corp' device = 'MCP55 High Definition Audio (ADI 1988)' class = multimedia subclass = HDA but after updating to last current tree, system is frozen after identifying hdac1
Responsible Changed From-To: freebsd-bugs->freebsd-multimedia Over to maintainer(s).
Could you try in hdac.c change line { HDA_NVIDIA_MCP55, "NVidia MCP55", 0 }, into { HDA_NVIDIA_MCP55, "NVidia MCP55", HDAC_NO_64BIT }, ? If it does not help, try to boot with verbose messages enabled and provide all related verbose hdac messages. -- Alexander Motin
now I can boot, but device was not attached anyway sorry, I forgot about loader.conf, I'm forced to use "hw.pci.mcfg=0" due to this reason: http://lists.freebsd.org/pipermail/freebsd-amd64/2009-May/012180.html with msi no errors of hdac driver
S Smirnov wrote: > now I can boot, but device was not attached anyway > sorry, I forgot about loader.conf, I'm forced to use "hw.pci.mcfg=0" due to this reason: > http://lists.freebsd.org/pipermail/freebsd-amd64/2009-May/012180.html > with msi no errors of hdac driver Could you put new verbose messages somewhere? -- Alexander Motin
*confused*<br />sorry, dmesgs were mixed by me<br />http://pastebin.com/m1cc76383<br /><DIV class="de1" _moz_dirty="" >second part - succesful boot, snd_hda work<br />Start of dmesg wasn't not saved in kern.msgbuf and not in log/messages, it's important?<br />I'm mind that at mount-stage msgbuf was crowded.</DIV> <DIV class="de2" _moz_dirty="" >defining { HDA_NVIDIA_MCP55, "NVidia MCP55", HDAC_NO_MSI },<br />allows me to enjoy new sound-subsystem :)<br />with non-important low-level background statical noise</DIV><DIV class="de1" _moz_dirty="" ></DIV><br />14.07.09, 14:01, "Alexander Motin" <MAV@FREEBSD.ORG >:<br /><br />> S Smirnov wrote:<br />> > now I can boot, but device was not attached anyway<br />> > sorry, I forgot about loader.conf, I'm forced to use "hw.pci.mcfg=0" due to this reason:<b r />> > http://lists.freebsd.org/pipermail/freebsd-amd64/2009-May/012180.html<br />> > with msi no errors of hdac driver<br />> Could you put new verbose messages somewhere?</MAV@FREEBSD.ORG>
*confused* sorry, dmesgs were mixed by me http://pastebin.com/m1cc76383 second part - succesful boot, snd_hda work Start of dmesg wasn't not saved in kern.msgbuf and not in log/messages, it's important? I'm mind that at mount-stage msgbuf was crowded. defining { HDA_NVIDIA_MCP55, "NVidia MCP55", HDAC_NO_MSI }, allows me to enjoy new sound-subsystem :) with non-important low-level background statical noise
Author: mav Date: Tue Jul 14 19:18:31 2009 New Revision: 195690 URL: http://svn.freebsd.org/changeset/base/195690 Log: Disable MSI by default for nVidia MCP55 chipset. It is reported to be broken in the same way as MCP51. PR: kern/136429 Approved by: re (kib) Modified: head/sys/dev/sound/pci/hda/hdac.c Modified: head/sys/dev/sound/pci/hda/hdac.c ============================================================================== --- head/sys/dev/sound/pci/hda/hdac.c Tue Jul 14 18:53:34 2009 (r195689) +++ head/sys/dev/sound/pci/hda/hdac.c Tue Jul 14 19:18:31 2009 (r195690) @@ -490,7 +490,7 @@ static const struct { { HDA_INTEL_PCH, "Intel PCH", 0 }, { HDA_INTEL_SCH, "Intel SCH", 0 }, { HDA_NVIDIA_MCP51, "NVidia MCP51", HDAC_NO_MSI }, - { HDA_NVIDIA_MCP55, "NVidia MCP55", 0 }, + { HDA_NVIDIA_MCP55, "NVidia MCP55", HDAC_NO_MSI }, { HDA_NVIDIA_MCP61_1, "NVidia MCP61", 0 }, { HDA_NVIDIA_MCP61_2, "NVidia MCP61", 0 }, { HDA_NVIDIA_MCP65_1, "NVidia MCP65", 0 }, _______________________________________________ svn-src-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscribe@freebsd.org"
State Changed From-To: open->closed Patch committed to 8-CURRENT. STABLE is not affected.