Created attachment 242370 [details] Domoticz update to 2023.1 This patch updates www/domoticz from 2022.1 to 2023.1 Notice: this port now doesn't depends on openzwave-devel since support for openzwave will be deprecated soon. poudriere has been run here an no bug are expected.
Thank you for your submission. Please remember to set maintainer-approval to + on patches to ports you maintain so they get looked at quickly. Is there a changelog for this update? I've tried to apply your patch, but unfortunately it does not apply. Please check and submit a patch that applies to the current ports tree.
Created attachment 242371 [details] Domoticz update to 2023.1 (fixed) Thanks Robert, For some reason my freebsd ports tree was borken. Here is a new patch that should be ok now. Full change log : Version 2023.1 (February 14 2023) - For a full overview visit: https://www.domoticz.com/wiki/Domoticz_versions_-_Commits for details - Implemented: Accept JWT tokens as authentication and Authorization Bearer tokens (either from internal or external IAM service) - Implemented: Blinds, added option to schedule 0% - Implemented: dzVents, OpenURL PATCH method - Implemented: Enphase, redesign and added battery readings (Supports firmware V7) - Implemented: Internal OAuth2/OIDC IAM service supporting 4 different flows (OAuth2 (RFC6749), PKCE extension (RFC7636) and JWT Tokens (RFC7519)) - Implemented: MQTT, added support for Lock status - Implemented: MQTT, added support for wildcards in discovery topics - Implemented: MQTT, climate preset mode - Implemented: New 'auth' debug flag to see IAM related messages - Implemented: Now 'Applications' can be registered to get secure access to Domoticz, see 'setup' menu (standard DomoticzUI app is registered by default) - Implemented: P1 Meter, added number of (long) power failures, voltage sags/swells - Implemented: SECURITY_SETUP.md describing the new/improved security setup - Implemented: Support for basic OpenID Connect Discovery ('https://<DOMOTICZURL>/.well-known/openid-configuration') - Implemented: Search option in Switches/Scenes/Temperature/Utility and Weather tab - Implemented: The Security realm can be configured using the 'vhostname' option (default domoticz.com) - Implemented: Timer, Grid option for selected switches and thermostat. Big thanks to syrhus/labelette91580 and xbeaudouin - Implemented: User device selection now displays type/subtype - Changed: All security related setting are now in 1 settings tab - Changed: By default prompt for login to only allow secure access - Changed: Default 'admin' user is generated with standard password (see Users) - Changed: Dimmer, restores to previous Set Level state after Off - Changed: Implicit adding local IP to 'trusted networks' has been removed. Needs to be set explicitly for security reasons! - Changed: Lots of security related code cleanup and improvements - Changed: Menu option for 'Users' moved to main 'Setup' menu list - Changed: MQTT timeout increased to 2 minutes - Changed: The following proxy headers are now properly supported 'Forwarded' (RFC7239), 'X-Forwarder-For' and 'X-Real-IP' (in that order) - Changed: The secure server (HTTPS) sends proper CORS and Security headers - Fixed: Dashboard, scenes/lights hidden when this was disabled in user settings - Fixed: Dashboard, mobile display did not display P1 meter current return value correctly - Fixed: Dashboard, not showing disabled sections (temperature/weather/utility) when a device has multiple properties (for instance temperature + weather) - Fixed: Highcharts dropdown menu z-index problem - Fixed: Logout now returns 204 instead of 401 - Fixed: Waterflow sensor custom icon - Fixed: Making sure Custom icons are valid (when someone manually edits the database) - Fixed: Mobile display text objects with long lines - Fixed: MQTT-AD Climate, fixed setpoint temperature display - Fixed: Navigation bar display issues on some mobile devices - Fixed: Setpoint popup when using protection Version 2022.2 (November 5 2022) - Implemented: Blockly, added 'Toggle' set command - Implemented: Camera, camera Aspect Ratio - Implemented: Commandline option '-weblog <weblogfile>' which creates Apache Combined Logformat logs containg all webrequests - Implemented: Counters, support for larger counter values/usage - Implemented: Dashboard, temperature Trend indication - Implemented: Docker startup script (for instance to install additional packages) - Implemented: EcoDevices, complete support for EcoDevices RT2 with firmware 3.00.xx - Implemented: FritzBox, more statistics - Implemented: Fritzbox, up/download statistics - Implemented: MQTT Auto Discovery Protocol (Zigbee2MQTT/ Z-Wave JS UI) - Implemented: P1 Meter, added Current L1/L2/L3 sensor for delivered - Implemented: Philips Hue, support color change on some vendors bulb (like LIDL) - Implemented: RFXCom, added internal support for Novy Mood, Level Sensor - Implemented: SolarEdge, more sensors support - Implemented: UVI device, added multiply field to widget - Implemented: Xiaomi Gateway, new model for wired single key switch - Updated: Mercedes EV, new Token URL (changed November 2022) - Changed: All inverted Blinds types should not be used anymore, instead use the regular blinds and set the needed Reverse option - Changed: Blinds working (see https://www.domoticz.com/wiki/Blinds) - Changed: Energy devices have more precision - Changed: kWh devices MAX Power per phase from 10000 to 18400 (230V*80A) - Changed: P1 Meter, changed P1 Max W from 17250 (25A) to 55200 (80A) - Changed: P1 Meter, speed up CRC calculation - Changed: Webserver, removing AppCache, switching to service worker - Fixed: Blockly, keeping last dim level when switching OFF, option for Close state - Fixed: Counter incremental, counter in report (when used with meter offset) - Fixed: Counter short-term log 1 hour offset - Fixed: Counters, rounding (number of decimals) in GUI - Fixed: Crash when secure webserver could not start and applying settings - Fixed: Dimmer, better handling of last dimmer level when switching on/off - Fixed: EvoHome, correct state/mode for EvoHome type - Fixed: Floorplan, custom utility icons corrected in Floorplan - Fixed: Floorplan, fixed blinds state icon/switching - Fixed: Floorplan, making sure the Door Lock is switchable in the Floorplan - Fixed: Floorplans, fixed issues with the displaying of some icons - Fixed: Notification system, prevent double start - Fixed: P1 Meter, fix for Sibelga smart meters that use a too long string as an identifier - Fixed: RFXCom, corrected RFXCom solar sensor reading - Fixed: Temperature, corrected chill calculation - Fixed: WebGUI, making sure status does not wrap in mobile mode - Removed: AppCache - Deprecated: OpenZWave, please move to MQTT Auto Discovery and ZWave JS UI (Project stopped a long time ago!)
Thank you. Ideally produce these patches with git-format-patch(1) in the future. Will commit with my next batch.
A commit in branch main references this bug: URL: https://cgit.FreeBSD.org/ports/commit/?id=5614e7e43d02285cb04b50080dc58b61db7d55c4 commit 5614e7e43d02285cb04b50080dc58b61db7d55c4 Author: Robert Clausecker <fuz@FreeBSD.org> AuthorDate: 2023-05-24 15:55:00 +0000 Commit: Robert Clausecker <fuz@FreeBSD.org> CommitDate: 2023-05-25 09:41:32 +0000 www/domoticz: update to 2023.1 Upstream changes: - Implemented: Accept JWT tokens as authentication and Authorization Bearer tokens (either from internal or external IAM service) - Implemented: Blinds, added option to schedule 0% - Implemented: dzVents, OpenURL PATCH method - Implemented: Enphase, redesign and added battery readings (Supports firmware V7) - Implemented: Internal OAuth2/OIDC IAM service supporting 4 different flows (OAuth2 (RFC6749), PKCE extension (RFC7636) and JWT Tokens (RFC7519)) - Implemented: MQTT, added support for Lock status - Implemented: MQTT, added support for wildcards in discovery topics - Implemented: MQTT, climate preset mode - Implemented: New 'auth' debug flag to see IAM related messages - Implemented: Now 'Applications' can be registered to get secure access to Domoticz, see 'setup' menu (standard DomoticzUI app is registered by default) - Implemented: P1 Meter, added number of (long) power failures, voltage sags/swells - Implemented: SECURITY_SETUP.md describing the new/improved security setup - Implemented: Support for basic OpenID Connect Discovery ('https://<DOMOTICZURL>/.well-known/openid-configuration') - Implemented: Search option in Switches/Scenes/Temperature/Utility and Weather tab - Implemented: The Security realm can be configured using the 'vhostname' option (default domoticz.com) - Implemented: Timer, Grid option for selected switches and thermostat. Big thanks to syrhus/labelette91580 and xbeaudouin - Implemented: User device selection now displays type/subtype - Changed: All security related setting are now in 1 settings tab - Changed: By default prompt for login to only allow secure access - Changed: Default 'admin' user is generated with standard password (see Users) - Changed: Dimmer, restores to previous Set Level state after Off - Changed: Implicit adding local IP to 'trusted networks' has been removed. Needs to be set explicitly for security reasons! - Changed: Lots of security related code cleanup and improvements - Changed: Menu option for 'Users' moved to main 'Setup' menu list - Changed: MQTT timeout increased to 2 minutes - Changed: The following proxy headers are now properly supported 'Forwarded' (RFC7239), 'X-Forwarder-For' and 'X-Real-IP' (in that order) - Changed: The secure server (HTTPS) sends proper CORS and Security headers - Fixed: Dashboard, scenes/lights hidden when this was disabled in user settings - Fixed: Dashboard, mobile display did not display P1 meter current return value correctly - Fixed: Dashboard, not showing disabled sections (temperature/weather/utility) when a device has multiple properties (for instance temperature + weather) - Fixed: Highcharts dropdown menu z-index problem - Fixed: Logout now returns 204 instead of 401 - Fixed: Waterflow sensor custom icon - Fixed: Making sure Custom icons are valid (when someone manually edits the database) - Fixed: Mobile display text objects with long lines - Fixed: MQTT-AD Climate, fixed setpoint temperature display - Fixed: Navigation bar display issues on some mobile devices - Fixed: Setpoint popup when using protection Version 2022.2 (November 5 2022) - Implemented: Blockly, added 'Toggle' set command - Implemented: Camera, camera Aspect Ratio - Implemented: Commandline option '-weblog <weblogfile>' which creates Apache Combined Logformat logs containg all webrequests - Implemented: Counters, support for larger counter values/usage - Implemented: Dashboard, temperature Trend indication - Implemented: Docker startup script (for instance to install additional packages) - Implemented: EcoDevices, complete support for EcoDevices RT2 with firmware 3.00.xx - Implemented: FritzBox, more statistics - Implemented: Fritzbox, up/download statistics - Implemented: MQTT Auto Discovery Protocol (Zigbee2MQTT/ Z-Wave JS UI) - Implemented: P1 Meter, added Current L1/L2/L3 sensor for delivered - Implemented: Philips Hue, support color change on some vendors bulb (like LIDL) - Implemented: RFXCom, added internal support for Novy Mood, Level Sensor - Implemented: SolarEdge, more sensors support - Implemented: UVI device, added multiply field to widget - Implemented: Xiaomi Gateway, new model for wired single key switch - Updated: Mercedes EV, new Token URL (changed November 2022) - Changed: All inverted Blinds types should not be used anymore, instead use the regular blinds and set the needed Reverse option - Changed: Blinds working (see https://www.domoticz.com/wiki/Blinds) - Changed: Energy devices have more precision - Changed: kWh devices MAX Power per phase from 10000 to 18400 (230V*80A) - Changed: P1 Meter, changed P1 Max W from 17250 (25A) to 55200 (80A) - Changed: P1 Meter, speed up CRC calculation - Changed: Webserver, removing AppCache, switching to service worker - Fixed: Blockly, keeping last dim level when switching OFF, option for Close state - Fixed: Counter incremental, counter in report (when used with meter offset) - Fixed: Counter short-term log 1 hour offset - Fixed: Counters, rounding (number of decimals) in GUI - Fixed: Crash when secure webserver could not start and applying settings - Fixed: Dimmer, better handling of last dimmer level when switching on/off - Fixed: EvoHome, correct state/mode for EvoHome type - Fixed: Floorplan, custom utility icons corrected in Floorplan - Fixed: Floorplan, fixed blinds state icon/switching - Fixed: Floorplan, making sure the Door Lock is switchable in the Floorplan - Fixed: Floorplans, fixed issues with the displaying of some icons - Fixed: Notification system, prevent double start - Fixed: P1 Meter, fix for Sibelga smart meters that use a too long string as an identifier - Fixed: RFXCom, corrected RFXCom solar sensor reading - Fixed: Temperature, corrected chill calculation - Fixed: WebGUI, making sure status does not wrap in mobile mode - Removed: AppCache - Deprecated: OpenZWave, please move to MQTT Auto Discovery and ZWave JS UI (Project stopped a long time ago!) PR: 271603 www/domoticz/Makefile | 11 +-- www/domoticz/distinfo | 6 +- www/domoticz/files/patch-CMakeLists.txt (new) | 130 ++++++++++++++++++++++++++ www/domoticz/pkg-plist | 46 +++++++-- 4 files changed, 178 insertions(+), 15 deletions(-)
Thank you for your submission.