Attachment #140136 for bug #186631

View | Details | Raw Unified | Return to bug 186631
Collapse All | Expand All

Lines 3-8 Link Here

(-)Makefile (-6 / +8 lines)
3		3
4	PORTNAME= nsd	4	PORTNAME= nsd
5	PORTVERSION= 4.0.1	5	PORTVERSION= 4.0.1
		6	PORTREVISION= 1
6	CATEGORIES= dns ipv6	7	CATEGORIES= dns ipv6
7	MASTER_SITES= http://www.nlnetlabs.nl/downloads/nsd/ \	8	MASTER_SITES= http://www.nlnetlabs.nl/downloads/nsd/ \
8	ftp://ftp.rhnet.is/pub/nsd/	9	ftp://ftp.rhnet.is/pub/nsd/
Lines 10-17 Link Here
10	MAINTAINER= jaap@NLnetLabs.nl	11	MAINTAINER= jaap@NLnetLabs.nl
11	COMMENT= An authoritative only non-recursive name server	12	COMMENT= An authoritative only non-recursive name server
12		13
13	CONFLICTS= nsd-[0-]* nsd3-*	14	LICENSE= BSD3CLAUSE
14		15
		16	CONFLICTS= nsd-[0-3]* nsd3-[0-9]*
		17
15	USE_RC_SUBR= nsd	18	USE_RC_SUBR= nsd
16		19
17	NSDUSER?= bind	20	NSDUSER?= bind
Lines 46-52 Link Here
46	differences.tex	49	differences.tex
47		50
48	OPTIONS_DEFINE= ROOT_SERVER LARGEFILE IPV6 BIND8_STATS CHECKING \	51	OPTIONS_DEFINE= ROOT_SERVER LARGEFILE IPV6 BIND8_STATS CHECKING \
49	MINRESPSIZE NSEC3 NSEC3PREHASH MMAP MAXIPS DOCS EUI_RRTYPES	52	MINRESPSIZE NSEC3 NSEC3PREHASH MMAP MAXIPS DOCS RRL EUI_RRTYPES
50	OPTIONS_DEFAULT= LARGEFILE IPV6 NSEC3 NSEC3PREHASH MINRESPSIZE RRL \	53	OPTIONS_DEFAULT= LARGEFILE IPV6 NSEC3 NSEC3PREHASH MINRESPSIZE RRL \
51	EUI_RRTYPES	54	EUI_RRTYPES
52		55
Lines 62-68 Link Here
62	RRL_DESC= Response Rate Limiting	65	RRL_DESC= Response Rate Limiting
63	EUI_RRTYPES_DESC= EUI48 and EUI64 RRtypes support	66	EUI_RRTYPES_DESC= EUI48 and EUI64 RRtypes support
64		67
65	NO_STAGE= yes
66	.include <bsd.port.options.mk>	68	.include <bsd.port.options.mk>
67		69
68	LIB_DEPENDS+= event-1:${PORTSDIR}/devel/libevent	70	LIB_DEPENDS+= event-1:${PORTSDIR}/devel/libevent
Lines 132-142 Link Here
132		134
133	post-install:	135	post-install:
134	${INSTALL_DATA} ${WRKSRC}/nsd.conf.sample \	136	${INSTALL_DATA} ${WRKSRC}/nsd.conf.sample \
135	${PREFIX}/etc/nsd/nsd.conf.sample	137	${STAGEDIR}${PREFIX}/etc/nsd/nsd.conf.sample
136	.if ${PORT_OPTIONS:MDOCS}	138	.if ${PORT_OPTIONS:MDOCS}
137	@${MKDIR} ${DOCSDIR}	139	@${MKDIR} ${STAGEDIR}${DOCSDIR}
138	.for f in ${PORTDOCS}	140	.for f in ${PORTDOCS}
139	${INSTALL_DATA} ${WRKSRC}/doc/${f} ${DOCSDIR}/${f}	141	${INSTALL_DATA} ${WRKSRC}/doc/${f} ${STAGEDIR}${DOCSDIR}/${f}
140	.endfor	142	.endfor
141	.endif	143	.endif
142	@${SETENV} PKG_PREFIX=${PREFIX} ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL	144	@${SETENV} PKG_PREFIX=${PREFIX} ${SH} ${PKGINSTALL} ${PKGNAME} POST-INSTALL




# nsd_enable="YES"
#

: ${nsd_enable="NO"}

. /etc/rc.subr

name=nsd
rcvar=nsd_enable

config=${nsd_config:=%%PREFIX%%/etc/nsd/nsd.conf}
required_files=${config}

command=%%PREFIX%%/sbin/nsd-control
command_args="start"
pidfile=`%%PREFIX%%/sbin/nsd-checkconf -o pidfile ${config}`

command="%%PREFIX%%/sbin/${name}"
command_args="-c ${required_files}"
extra_commands="reload"

load_rc_config $name

run_rc_command "$1"


Lines 1-6 Link Here

(-)pkg-message (-1 / +1 lines)
1	**************************************************************************	1	**************************************************************************
2	*	2	*
3	* To run nsd from startup, add nsd_enable="YES" to your /etc/rc.conf	3	* To run nsd from startup, add nsd_enable="YES" to your etc/rc.conf
4	*	4	*
5	* Starting with nsd version 4 the old nsdc control program has been	5	* Starting with nsd version 4 the old nsdc control program has been
6	* replaced by nsd-control. This requires some manual setup with	6	* replaced by nsd-control. This requires some manual setup with

Return to bug 186631

Lines 12-32 Link Here

(-)files/nsd.in (-6 / +7 lines)
12	# nsd_enable="YES"	12	# nsd_enable="YES"
13	#	13	#
14		14
		15	: ${nsd_enable="NO"}
		16
15	. /etc/rc.subr	17	. /etc/rc.subr
16		18
17	name=nsd	19	name=nsd
18	rcvar=${name}_enable	20	rcvar=nsd_enable
19		21
20	config=${nsd_config:=%%PREFIX%%/etc/nsd/nsd.conf}	22	config=${nsd_config:=%%PREFIX%%/etc/nsd/nsd.conf}
21	required_files=${config}	23	required_files=${config}
22
23	command=%%PREFIX%%/sbin/nsd-control
24	command_args="start"
25	pidfile=`%%PREFIX%%/sbin/nsd-checkconf -o pidfile ${config}`	24	pidfile=`%%PREFIX%%/sbin/nsd-checkconf -o pidfile ${config}`
26		25
27	procname=%%PREFIX%%/sbin/${name}	26	command="%%PREFIX%%/sbin/${name}"
28		27	command_args="-c ${required_files}"
29	extra_commands="reload"	28	extra_commands="reload"
30		29
		30	load_rc_config $name
		31
31	run_rc_command "$1"	32	run_rc_command "$1"
32		33