Attachment #140431 for bug #187011

View | Details | Raw Unified | Return to bug 187011
Collapse All | Expand All





PORTNAME=	scim-table-imengine
PORTVERSION=	0.5.10
PORTREVISION=	2
CATEGORIES=	textproc
MASTER_SITES=	SF/scim/scim-tables/${PORTVERSION}
DISTNAME=	scim-tables-${PORTVERSION}

BUILD_DEPENDS=	scim:${PORTSDIR}/textproc/scim
RUN_DEPENDS=	scim:${PORTSDIR}/textproc/scim

USE_AUTOTOOLS=	libtool
GNU_CONFIGURE=	yes
USES=		gettext gmake libtool pkgconfig
USES=		gettext gmake pkgconfig

MAN1=		scim-make-table.1

NO_STAGE=	yes
.include <bsd.port.pre.mk>

CONFIGURE_ARGS=	--disable-skim-support
CPPFLAGS+=	-I${LOCALBASE}/include -D__STDC_ISO_10646__

CONFIGURE_ENV+=	PREFIX="${PREFIX}"
LDFLAGS+=	-L${LOCALBASE}/lib -lintl

PLIST_SUB=	SKIM="@comment "

pre-fetch:
	@${ECHO_MSG} Define WITH_SKIM to enable skim support

.if exists(${LOCALBASE}/bin/skim)
WITH_SKIM=	yes
pre-patch:
	@${ECHO_MSG} Skim is detected, support enabled.
.endif

.if defined(WITH_SKIM)
BUILD_DEPENDS+=	skim:${PORTSDIR}/textproc/skim
CONFIGURE_ENV+=	PTHREAD_LIBS="${PTHREAD_LIBS}"
PLIST_SUB=	SKIM=""
USE_AUTOTOOLS=	libtool
post-patch:
	@${TOUCH} ${WRKSRC}/config.h.in
		-e "/^@SCIM_TABLES_ENABLE_SKIM_SUPPORT_TRUE@SKIM_SUBDIR =/s/$$/ skim/" \
		${WRKSRC}/Makefile.in
post-configure:
	${REINPLACE_CMD} \
		-e 's,$$(top_builddir)/libtool --silent,${LIBTOOL},' \
		${WRKSRC}/skim/Makefile ${WRKSRC}/skim/setupui/Makefile
.endif

post-install:
	@${CAT} ${PKGMESSAGE}
	@${ECHO}
	@${ECHO} To display this message again, type \`pkg_info -D ${PKGNAME}\'
	@${ECHO}

.include <bsd.port.mk>

Lines 3-12 The installation of SCIM table-based im Link Here

(-)textproc/scim-table-imengine/pkg-message (-4 lines)
3	port is only an engine for table-based input methods and does not contain any	3	port is only an engine for table-based input methods and does not contain any
4	actual input methods.	4	actual input methods.
5		5
6	If you are using a 4.x system, please note there is no working scim-make-table
7	command available in this port. Run `scim-make-table' command to get more
8	information.
9
10	The following ports can utilize this table-based imengine:	6	The following ports can utilize this table-based imengine:
11		7
12	Chinese:	8	Chinese:




lib/scim-1.0/1.4.0/SetupUI/table-imengine-setup.a
lib/scim-1.0/1.4.0/SetupUI/table-imengine-setup.la
lib/scim-1.0/1.4.0/SetupUI/table-imengine-setup.so
man/man1/scim-make-table.1.gz
share/scim/icons/table.png
share/locale/zh_CN/LC_MESSAGES/scim-tables.mo
share/locale/zh_TW/LC_MESSAGES/scim-tables.mo

share/locale/it/LC_MESSAGES/scim-tables.mo
share/locale/pa/LC_MESSAGES/scim-tables.mo
share/locale/nl/LC_MESSAGES/scim-tables.mo
%%SKIM%%@cwd %%LOCALBASE%%
%%SKIM%%lib/kde3/kcm_skimplugin_scim_tables.a
%%SKIM%%lib/kde3/kcm_skimplugin_scim_tables.la
%%SKIM%%lib/kde3/kcm_skimplugin_scim_tables.so
%%SKIM%%share/services/skimconfiguredialog/skimplugin_scim_table_config.desktop
%%SKIM%%share/config.kcfg/generictable.kcfg
%%SKIM%%share/locale/zh_CN/LC_MESSAGES/skim-scim-tables.mo
%%SKIM%%share/locale/zh_TW/LC_MESSAGES/skim-scim-tables.mo
%%SKIM%%share/locale/de/LC_MESSAGES/skim-scim-tables.mo
%%SKIM%%share/locale/fr/LC_MESSAGES/skim-scim-tables.mo
%%SKIM%%share/locale/ja/LC_MESSAGES/skim-scim-tables.mo
%%SKIM%%share/locale/it/LC_MESSAGES/skim-scim-tables.mo
%%SKIM%%share/locale/ko/LC_MESSAGES/skim-scim-tables.mo
%%SKIM%%share/locale/pa/LC_MESSAGES/skim-scim-tables.mo
%%SKIM%%share/locale/nl/LC_MESSAGES/skim-scim-tables.mo
%%SKIM%%share/apps/skim/pics/scim-tables.png
%%SKIM%%@dirrmtry share/apps/skim/pics
%%SKIM%%@dirrmtry share/apps/skim
%%SKIM%%@dirrmtry share/config.kcfg
%%SKIM%%@dirrmtry share/services/skimconfiguredialog
@dirrmtry lib/scim-1.0/1.4.0/SetupUI
@dirrmtry lib/scim-1.0/1.4.0/IMEngine
@dirrmtry lib/scim-1.0

Return to bug 187011

Lines 3-9 Link Here

(-)textproc/scim-table-imengine/Makefile (-42 / +5 lines)
3		3
4	PORTNAME= scim-table-imengine	4	PORTNAME= scim-table-imengine
5	PORTVERSION= 0.5.10	5	PORTVERSION= 0.5.10
6	PORTREVISION= 1	6	PORTREVISION= 2
7	CATEGORIES= textproc	7	CATEGORIES= textproc
8	MASTER_SITES= SF/scim/scim-tables/${PORTVERSION}	8	MASTER_SITES= SF/scim/scim-tables/${PORTVERSION}
9	DISTNAME= scim-tables-${PORTVERSION}	9	DISTNAME= scim-tables-${PORTVERSION}
Lines 14-64 COMMENT= SCIM table based input method e Link Here
14	BUILD_DEPENDS= scim:${PORTSDIR}/textproc/scim	14	BUILD_DEPENDS= scim:${PORTSDIR}/textproc/scim
15	RUN_DEPENDS= scim:${PORTSDIR}/textproc/scim	15	RUN_DEPENDS= scim:${PORTSDIR}/textproc/scim
16		16
17	USE_AUTOTOOLS= libtool
18	GNU_CONFIGURE= yes	17	GNU_CONFIGURE= yes
19	USE_GNOME= intlhack	18	USES= gettext gmake libtool pkgconfig
20	USES= gettext gmake pkgconfig
21
22	MAN1= scim-make-table.1
23
24	NO_STAGE= yes
25	.include <bsd.port.pre.mk>
26		19
		20	CONFIGURE_ARGS= --disable-skim-support
27	CPPFLAGS+= -I${LOCALBASE}/include -D__STDC_ISO_10646__	21	CPPFLAGS+= -I${LOCALBASE}/include -D__STDC_ISO_10646__
28
29	CONFIGURE_ENV+= PREFIX="${PREFIX}"
30	LDFLAGS+= -L${LOCALBASE}/lib -lintl	22	LDFLAGS+= -L${LOCALBASE}/lib -lintl
31		23
32	PLIST_SUB= SKIM="@comment "
33
34	pre-fetch:
35	@${ECHO_MSG} Define WITH_SKIM to enable skim support
36
37	.if exists(${LOCALBASE}/bin/skim)
38	WITH_SKIM= yes
39	pre-patch:
40	@${ECHO_MSG} Skim is detected, support enabled.
41	.endif
42
43	.if defined(WITH_SKIM)
44	BUILD_DEPENDS+= skim:${PORTSDIR}/textproc/skim
45	CONFIGURE_ENV+= PTHREAD_LIBS="${PTHREAD_LIBS}"
46	PLIST_SUB= SKIM=""
47	USE_AUTOTOOLS= libtool
48	post-patch:	24	post-patch:
49	@${REINPLACE_CMD} -e "/^DIST_SUBDIRS/s/$$/ skim/" \	25	@${TOUCH} ${WRKSRC}/config.h.in
50	-e "/^@SCIM_TABLES_ENABLE_SKIM_SUPPORT_TRUE@SKIM_SUBDIR =/s/$$/ skim/" \
51	${WRKSRC}/Makefile.in
52	post-configure:
53	${REINPLACE_CMD} \
54	-e 's,$$(top_builddir)/libtool --silent,${LIBTOOL},' \
55	${WRKSRC}/skim/Makefile ${WRKSRC}/skim/setupui/Makefile
56	.endif
57
58	post-install:
59	@${CAT} ${PKGMESSAGE}
60	@${ECHO}
61	@${ECHO} To display this message again, type \`pkg_info -D ${PKGNAME}\'
62	@${ECHO}
63		26
64	.include <bsd.port.post.mk>	27	.include <bsd.port.mk>

Lines 5-10 lib/scim-1.0/1.4.0/IMEngine/table.so Link Here

(-)textproc/scim-table-imengine/pkg-plist (-23 / +1 lines)
5	lib/scim-1.0/1.4.0/SetupUI/table-imengine-setup.a	5	lib/scim-1.0/1.4.0/SetupUI/table-imengine-setup.a
6	lib/scim-1.0/1.4.0/SetupUI/table-imengine-setup.la	6	lib/scim-1.0/1.4.0/SetupUI/table-imengine-setup.la
7	lib/scim-1.0/1.4.0/SetupUI/table-imengine-setup.so	7	lib/scim-1.0/1.4.0/SetupUI/table-imengine-setup.so
		8	man/man1/scim-make-table.1.gz
8	share/scim/icons/table.png	9	share/scim/icons/table.png
9	share/locale/zh_CN/LC_MESSAGES/scim-tables.mo	10	share/locale/zh_CN/LC_MESSAGES/scim-tables.mo
10	share/locale/zh_TW/LC_MESSAGES/scim-tables.mo	11	share/locale/zh_TW/LC_MESSAGES/scim-tables.mo
Lines 15-40 share/locale/fr/LC_MESSAGES/scim-tables. Link Here
15	share/locale/it/LC_MESSAGES/scim-tables.mo	16	share/locale/it/LC_MESSAGES/scim-tables.mo
16	share/locale/pa/LC_MESSAGES/scim-tables.mo	17	share/locale/pa/LC_MESSAGES/scim-tables.mo
17	share/locale/nl/LC_MESSAGES/scim-tables.mo	18	share/locale/nl/LC_MESSAGES/scim-tables.mo
18	%%SKIM%%@cwd %%LOCALBASE%%
19	%%SKIM%%lib/kde3/kcm_skimplugin_scim_tables.a
20	%%SKIM%%lib/kde3/kcm_skimplugin_scim_tables.la
21	%%SKIM%%lib/kde3/kcm_skimplugin_scim_tables.so
22	%%SKIM%%share/services/skimconfiguredialog/skimplugin_scim_table_config.desktop
23	%%SKIM%%share/config.kcfg/generictable.kcfg
24	%%SKIM%%share/locale/zh_CN/LC_MESSAGES/skim-scim-tables.mo
25	%%SKIM%%share/locale/zh_TW/LC_MESSAGES/skim-scim-tables.mo
26	%%SKIM%%share/locale/de/LC_MESSAGES/skim-scim-tables.mo
27	%%SKIM%%share/locale/fr/LC_MESSAGES/skim-scim-tables.mo
28	%%SKIM%%share/locale/ja/LC_MESSAGES/skim-scim-tables.mo
29	%%SKIM%%share/locale/it/LC_MESSAGES/skim-scim-tables.mo
30	%%SKIM%%share/locale/ko/LC_MESSAGES/skim-scim-tables.mo
31	%%SKIM%%share/locale/pa/LC_MESSAGES/skim-scim-tables.mo
32	%%SKIM%%share/locale/nl/LC_MESSAGES/skim-scim-tables.mo
33	%%SKIM%%share/apps/skim/pics/scim-tables.png
34	%%SKIM%%@dirrmtry share/apps/skim/pics
35	%%SKIM%%@dirrmtry share/apps/skim
36	%%SKIM%%@dirrmtry share/config.kcfg
37	%%SKIM%%@dirrmtry share/services/skimconfiguredialog
38	@dirrmtry lib/scim-1.0/1.4.0/SetupUI
39	@dirrmtry lib/scim-1.0/1.4.0/IMEngine
40	@dirrmtry lib/scim-1.0