Attachment 152106 Details for Bug 188897 – This is a verbose dmesg for another dc quadport card, a DFE-570TX

This is a verbose dmesg for another dc quadport card, a DFE-570TX

dmesg2 (text/plain), 40.34 KB, created by clif on 2015-01-24 19:46:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: clif

Created: 2015-01-24 19:46:34 UTC

Size: 40.34 KB

patch

obsolete

>MP Configuration Table version 1.4 found at 0xc00fbe60
>Table 'FACP' at 0xceffd000
>Table 'APIC' at 0xceff8000
>APIC: Found table at 0xceff8000
>APIC: Using the MADT enumerator.
>MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
>SMP: Added CPU 1 (AP)
>MADT: Found CPU APIC ID 2 ACPI ID 3: enabled
>SMP: Added CPU 2 (AP)
>MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
>SMP: Added CPU 3 (AP)
>Copyright (c) 1992-2014 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 10.0-RELEASE #0 r260789: Fri Jan 17 01:46:25 UTC 2014
>    root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
>FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc1678000.
>Calibrating TSC clock ... TSC clock: 1666724860 Hz
>CPU: Intel(R) Atom(TM) CPU D510   @ 1.66GHz (1666.72-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x106ca  Family = 0x6  Model = 0x1c  Stepping = 10
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
>  AMD Features=0x20100000<NX,LM>
>  AMD Features2=0x1<LAHF>
>  TSC: P-state invariant, performance statistics
>
>1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
>L2 cache: 512 kbytes, 8-way associative, 64 bytes/line
>real memory  = 4294967296 (4096 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x000000000008dfff, 577536 bytes (141 pages)
>0x0000000000090000 - 0x000000000009dfff, 57344 bytes (14 pages)
>0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>0x0000000001826000 - 0x00000000cb738fff, 3388026880 bytes (827155 pages)
>0x00000000ceebf000 - 0x00000000cef47fff, 561152 bytes (137 pages)
>0x00000000cefbf000 - 0x00000000cefd8fff, 106496 bytes (26 pages)
>avail memory = 3388112896 (3231 MB)
>Event timer "LAPIC" quality 400
>ACPI APIC Table: <INTEL  MOPNV10N>
>INTR: Adding local APIC 2 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP/HT): APIC ID:  1
> cpu2 (AP): APIC ID:  2
> cpu3 (AP/HT): APIC ID:  3
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 2
>APIC: CPU 2 has ACPI ID 3
>APIC: CPU 3 has ACPI ID 4
>XEN: CPU 0 has VCPU ID 1
>XEN: CPU 1 has VCPU ID 2
>XEN: CPU 2 has VCPU ID 3
>XEN: CPU 3 has VCPU ID 4
>pnpbios: Found PnP BIOS data at 0xc00f20b0
>pnpbios: Entry = f0000:214f  Rev = 1.0
>Other BIOS signatures found:
>ULE: setup cpu 0
>ULE: setup cpu 1
>ULE: setup cpu 2
>ULE: setup cpu 3
>ACPI: RSDP 0xf2060 00024 (v02 INTEL )
>ACPI: XSDT 0xceffe120 0004C (v01 INTEL  MOPNV10N 00000204      01000013)
>ACPI: FACP 0xceffd000 000F4 (v03 INTEL  MOPNV10N 00000204 MSFT 0100000D)
>ACPI: DSDT 0xceff9000 039A7 (v01 INTEL  MOPNV10N 00000204 MSFT 0100000D)
>ACPI: FACS 0xcef87000 00040
>ACPI: APIC 0xceff8000 00084 (v02 INTEL  MOPNV10N 00000204 MSFT 0100000D)
>ACPI: MCFG 0xceff7000 0003C (v01 INTEL  MOPNV10N 00000204 MSFT 0100000D)
>ACPI: HPET 0xceff6000 00038 (v01 INTEL  MOPNV10N 00000204 MSFT 0100000D)
>ACPI: SSDT 0xceff2000 0377C (v01 INTEL  SSDT  PM 00000204 MSFT 0100000D)
>MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
>ioapic0: Changing APIC ID to 8
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>lapic0: Routing NMI -> LINT1
>lapic0: LINT1 trigger: level
>lapic0: LINT1 polarity: high
>lapic1: Routing NMI -> LINT1
>lapic1: LINT1 trigger: level
>lapic1: LINT1 polarity: high
>lapic2: Routing NMI -> LINT1
>lapic2: LINT1 trigger: level
>lapic2: LINT1 polarity: high
>lapic3: Routing NMI -> LINT1
>lapic3: LINT1 trigger: level
>lapic3: LINT1 polarity: high
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>lapic0: Forcing LINT1 to edge trigger
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>wlan: <802.11 Link Layer>
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
>Hardware, Intel IvyBridge+ RNG: RDRAND is not present
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>Pentium Pro MTRR support enabled
>nfslock: pseudo-device
>null: <null device, zero device>
>Falling back to <Software, Yarrow> random adaptor
>random: <Software, Yarrow> initialized
>VESA: INT 0x10 vector 0xc000:0x0014
>VESA: information block
>0000   56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00
>0010   00 01 7f 00 00 01 34 01 00 01 46 01 00 01 6b 01
>0020   00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0030   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0040   60 01 61 01 62 01 63 01 64 01 65 01 66 01 67 01
>0050   68 01 69 01 6a 01 6b 01 6c 01 6d 01 6e 01 6f 01
>0060   70 01 71 01 3c 01 4d 01 5c 01 3a 01 4b 01 5a 01
>0070   07 01 1a 01 1b 01 05 01 17 01 18 01 12 01 14 01
>0080   15 01 01 01 03 01 11 01 ff ff 00 00 00 00 00 00
>0090   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0100   49 6e 74 65 6c 28 72 29 50 69 6e 65 56 69 65 77
>0110   20 47 72 61 70 68 69 63 73 20 43 68 69 70 20 41
>0120   63 63 65 6c 65 72 61 74 65 64 20 56 47 41 20 42
>0130   49 4f 53 00 49 6e 74 65 6c 20 43 6f 72 70 6f 72
>0140   61 74 69 6f 6e 00 49 6e 74 65 6c 28 72 29 50 69
>0150   6e 65 56 69 65 77 20 47 72 61 70 68 69 63 73 20
>0160   43 6f 6e 74 72 6f 6c 6c 65 72 00 48 61 72 64 77
>0170   61 72 65 20 56 65 72 73 69 6f 6e 20 30 2e 30 00
>0180   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0190   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>VESA: 17 mode(s) found
>VESA: v3.0, 8128k memory, flags:0x1, mode table:0xe378d040 (1000040)
>VESA: Intel(r)PineView Graphics Chip Accelerated VGA BIOS
>VESA: Intel Corporation Intel(r)PineView Graphics Controller Hardware Version 0.0
>io: <I/O>
>hpt27xx: RocketRAID 27xx controller driver v1.1
>hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>hptnr: R750/DC7280 controller driver v1.0
>acpi0: <INTEL MOPNV10N> on motherboard
>ACPI: All ACPI Tables successfully acquired
>PCIe: Memory Mapped configuration base @ 0xf8000000
>pcibios: No call entry point
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>acpi0: Power Button (fixed)
>acpi0: wakeup code va 0xe37d8000 pa 0x1000
>cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0
>cpu0: <ACPI CPU> on acpi0
>cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 1
>cpu1: <ACPI CPU> on acpi0
>cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 2
>cpu2: <ACPI CPU> on acpi0
>cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3
>cpu3: <ACPI CPU> on acpi0
>atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
>Event timer "RTC" frequency 32768 Hz quality 0
>attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 50
>Event timer "i8254" frequency 1193182 Hz quality 100
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
>hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
>hpet0:  t0: irqs 0x00f00000 (0), 64bit, periodic
>hpet0:  t1: irqs 0x00f00000 (0)
>hpet0:  t2: irqs 0x00f00800 (0)
>Timecounter "HPET" frequency 14318180 Hz quality 950
>ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 51
>Event timer "HPET" frequency 14318180 Hz quality 450
>Event timer "HPET1" frequency 14318180 Hz quality 440
>Event timer "HPET2" frequency 14318180 Hz quality 440
>ACPI timer: 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 1/3 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
>  Validation          0   11   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  3 4 5 7 9 10 11 12
>  Validation          0  255   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
>  Validation          0   11   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  3 4 5 7 9 10 11 12
>  Validation          0   10   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 7 9 10 11 12
>  Validation          0   11   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    9   N     0  3 4 5 7 9 10 11 12
>  Validation          0    9   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  3 4 5 7 9 10 11 12
>  Validation          0   10   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    9   N     0  3 4 5 7 9 10 11 12
>  Validation          0    9   N     0  3 4 5 7 9 10 11 12
>  After Disable       0  255   N     0  3 4 5 7 9 10 11 12
>acpi_button0: <Sleep Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0xd0000000-0xf7ffffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x8086, dev=0xa000, revid=0x02
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0xa001, revid=0x02
>	domain=0, bus=0, slot=2, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 32, base 0xe0300000, size 19, enabled
>pcib0: allocated type 3 (0xe0300000-0xe037ffff) for rid 10 of pci0:0:2:0
>	map[14]: type I/O Port, range 32, base 0x30c0, size  3, enabled
>pcib0: allocated type 4 (0x30c0-0x30c7) for rid 14 of pci0:0:2:0
>	map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
>pcib0: allocated type 3 (0xd0000000-0xdfffffff) for rid 18 of pci0:0:2:0
>	map[1c]: type Memory, range 32, base 0xe0200000, size 20, enabled
>pcib0: allocated type 3 (0xe0200000-0xe02fffff) for rid 1c of pci0:0:2:0
>pcib0: matched entry for 0.2.INTA
>pcib0: slot 2 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x27d0, revid=0x01
>	domain=0, bus=0, slot=28, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>found->	vendor=0x8086, dev=0x27d2, revid=0x01
>	domain=0, bus=0, slot=28, func=1
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=255
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>found->	vendor=0x8086, dev=0x27d4, revid=0x01
>	domain=0, bus=0, slot=28, func=2
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=255
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>found->	vendor=0x8086, dev=0x27d6, revid=0x01
>	domain=0, bus=0, slot=28, func=3
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=255
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>found->	vendor=0x8086, dev=0x27c8, revid=0x01
>	domain=0, bus=0, slot=29, func=0
>	class=0c-03-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=9
>	map[20]: type I/O Port, range 32, base 0x3080, size  5, enabled
>pcib0: allocated type 4 (0x3080-0x309f) for rid 20 of pci0:0:29:0
>pcib0: matched entry for 0.29.INTA
>pcib0: slot 29 INTA hardwired to IRQ 23
>found->	vendor=0x8086, dev=0x27c9, revid=0x01
>	domain=0, bus=0, slot=29, func=1
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=10
>	map[20]: type I/O Port, range 32, base 0x3060, size  5, enabled
>pcib0: allocated type 4 (0x3060-0x307f) for rid 20 of pci0:0:29:1
>pcib0: matched entry for 0.29.INTB
>pcib0: slot 29 INTB hardwired to IRQ 19
>found->	vendor=0x8086, dev=0x27ca, revid=0x01
>	domain=0, bus=0, slot=29, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=11
>	map[20]: type I/O Port, range 32, base 0x3040, size  5, enabled
>pcib0: allocated type 4 (0x3040-0x305f) for rid 20 of pci0:0:29:2
>pcib0: matched entry for 0.29.INTC
>pcib0: slot 29 INTC hardwired to IRQ 18
>found->	vendor=0x8086, dev=0x27cb, revid=0x01
>	domain=0, bus=0, slot=29, func=3
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=11
>	map[20]: type I/O Port, range 32, base 0x3020, size  5, enabled
>pcib0: allocated type 4 (0x3020-0x303f) for rid 20 of pci0:0:29:3
>pcib0: matched entry for 0.29.INTD
>pcib0: slot 29 INTD hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x27cc, revid=0x01
>	domain=0, bus=0, slot=29, func=7
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=9
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 32, base 0xe0380400, size 10, enabled
>pcib0: allocated type 3 (0xe0380400-0xe03807ff) for rid 10 of pci0:0:29:7
>pcib0: matched entry for 0.29.INTA
>pcib0: slot 29 INTA hardwired to IRQ 23
>ehci early: SMM active, request owner change
>found->	vendor=0x8086, dev=0x2448, revid=0xe1
>	domain=0, bus=0, slot=30, func=0
>	class=06-04-01, hdrtype=0x01, mfdev=0
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x27bc, revid=0x01
>	domain=0, bus=0, slot=31, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x27c0, revid=0x01
>	domain=0, bus=0, slot=31, func=2
>	class=01-01-8f, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=10
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type I/O Port, range 32, base 0x30b8, size  3, enabled
>pcib0: allocated type 4 (0x30b8-0x30bf) for rid 10 of pci0:0:31:2
>	map[14]: type I/O Port, range 32, base 0x30cc, size  2, enabled
>pcib0: allocated type 4 (0x30cc-0x30cf) for rid 14 of pci0:0:31:2
>	map[18]: type I/O Port, range 32, base 0x30b0, size  3, enabled
>pcib0: allocated type 4 (0x30b0-0x30b7) for rid 18 of pci0:0:31:2
>	map[1c]: type I/O Port, range 32, base 0x30c8, size  2, enabled
>pcib0: allocated type 4 (0x30c8-0x30cb) for rid 1c of pci0:0:31:2
>	map[20]: type I/O Port, range 32, base 0x30a0, size  4, enabled
>pcib0: allocated type 4 (0x30a0-0x30af) for rid 20 of pci0:0:31:2
>	map[24]: type Memory, range 32, base 0xe0380000, size 10, enabled
>pcib0: allocated type 3 (0xe0380000-0xe03803ff) for rid 24 of pci0:0:31:2
>pcib0: matched entry for 0.31.INTB
>pcib0: slot 31 INTB hardwired to IRQ 19
>found->	vendor=0x8086, dev=0x27da, revid=0x01
>	domain=0, bus=0, slot=31, func=3
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=10
>	map[20]: type I/O Port, range 32, base 0x3000, size  5, enabled
>pcib0: allocated type 4 (0x3000-0x301f) for rid 20 of pci0:0:31:3
>pcib0: matched entry for 0.31.INTB
>pcib0: slot 31 INTB hardwired to IRQ 19
>vgapci0: <VGA-compatible display> port 0x30c0-0x30c7 mem 0xe0300000-0xe037ffff,0xd0000000-0xdfffffff,0xe0200000-0xe02fffff irq 16 at device 2.0 on pci0
>agp0: <Intel Pineview SVGA controller> on vgapci0
>pcib0: allocated type 3 (0xe0000000-0xe0000fff) for rid 64 of agp0
>agp0: Allocated flush page phys 0xe0000000 virt 0xe37de000
>agp0: aperture size is 256M, detected 8188k stolen memory
>agp0: AGP_I810_PGTBL_CTL: 00000001
>agp0: AGP_I855_GCC1: 0x30
>agp0: AGP_I915_MSAC: 0x00
>agp0: Mappable GTT entries: 65536
>agp0: Total GTT entries: 131072
>vgapci0: Boot video device
>pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
>pcib1: allocating non-ISA range 0x2000-0x20ff
>pcib0: allocated type 4 (0x2000-0x20ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0x2400-0x24ff
>pcib0: allocated type 4 (0x2400-0x24ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0x2800-0x28ff
>pcib0: allocated type 4 (0x2800-0x28ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0x2c00-0x2cff
>pcib0: allocated type 4 (0x2c00-0x2cff) for rid 1c of pcib1
>pcib1: failed to allocate initial prefetch window: 0xe0000000-0xe00fffff
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0x2000-0x2fff
>pcib1:   special decode    ISA
>pci1: <ACPI PCI bus> on pcib1
>pci1: domain=0, physical bus=1
>found->	vendor=0x10ec, dev=0x8168, revid=0x03
>	domain=0, bus=1, slot=0, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	MSI-X supports 4 messages in map 0x20
>	map[10]: type I/O Port, range 32, base 0x2000, size  8, enabled
>pcib1: allocated I/O port range (0x2000-0x20ff) for rid 10 of pci0:1:0:0
>	map[18]: type Prefetchable Memory, range 64, base 0xe0004000, size 12, enabled
>pcib1: failed to allocate initial prefetch window (0xe0004000-0xe0004fff,0x1000)
>pcib1: failed to allocate initial memory window (0xe0004000-0xe0004fff,0x1000)
>pci1: pci0:1:0:0 bar 0x18 failed to allocate
>	map[20]: type Prefetchable Memory, range 64, base 0xe0000000, size 14, memory disabled
>pcib1: failed to allocate initial prefetch window (0xe0000000-0xe0003fff,0x4000)
>pcib1: failed to allocate initial memory window (0xe0000000-0xe0003fff,0x4000)
>pci1: pci0:1:0:0 bar 0x20 failed to allocate
>pcib1: matched entry for 1.0.INTA
>pcib1: slot 0 INTA hardwired to IRQ 16
>re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff irq 16 at device 0.0 on pci1
>pcib0: allocated type 3 (0xe0100000-0xe01fffff) for rid 24 of pcib1
>pcib1: allocated initial prefetch window of 0xe0100000-0xe01fffff
>pcib1: allocated prefetch range (0xe0100000-0xe0100fff) for rid 18 of re0
>re0: Lazy allocation of 0x1000 bytes rid 0x18 type 3 at 0xe0100000
>re0: MSI count : 1
>re0: MSI-X count : 4
>pcib1: allocated prefetch range (0xe0104000-0xe0107fff) for rid 20 of re0
>re0: Lazy allocation of 0x4000 bytes rid 0x20 type 3 at 0xe0104000
>re0: attempting to allocate 1 MSI-X vectors (4 supported)
>msi: routing MSI-X IRQ 256 to local APIC 0 vector 52
>re0: using IRQ 256 for MSI-X
>re0: Using 1 MSI-X message
>re0: Chip rev. 0x68000000
>re0: MAC rev. 0x00100000
>re0: Unknown H/W revision: 0x68000000
>device_attach: re0 attach returned 6
>pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   special decode    ISA
>pci2: <ACPI PCI bus> on pcib2
>pci2: domain=0, physical bus=2
>pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   special decode    ISA
>pci3: <ACPI PCI bus> on pcib3
>pci3: domain=0, physical bus=3
>pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
>pcib4:   domain            0
>pcib4:   secondary bus     4
>pcib4:   subordinate bus   4
>pcib4:   special decode    ISA
>pci4: <ACPI PCI bus> on pcib4
>pci4: domain=0, physical bus=4
>uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3080-0x309f irq 23 at device 29.0 on pci0
>ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
>uhci0: LegSup = 0x2f00
>usbus0 on uhci0
>uhci0: usbpf: Attached
>uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3060-0x307f irq 19 at device 29.1 on pci0
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
>uhci1: LegSup = 0x2f00
>usbus1 on uhci1
>uhci1: usbpf: Attached
>uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 18 at device 29.2 on pci0
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54
>uhci2: LegSup = 0x2f00
>usbus2 on uhci2
>uhci2: usbpf: Attached
>uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3020-0x303f irq 16 at device 29.3 on pci0
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 55
>uhci3: LegSup = 0x2f00
>usbus3 on uhci3
>uhci3: usbpf: Attached
>ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0380400-0xe03807ff irq 23 at device 29.7 on pci0
>usbus4: EHCI version 1.0
>usbus4 on ehci0
>ehci0: usbpf: Attached
>pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pcib5: allocating non-ISA range 0x1000-0x10ff
>pcib0: allocated type 4 (0x1000-0x10ff) for rid 1c of pcib5
>pcib5: allocating non-ISA range 0x1400-0x14ff
>pcib0: allocated type 4 (0x1400-0x14ff) for rid 1c of pcib5
>pcib5: allocating non-ISA range 0x1800-0x18ff
>pcib0: allocated type 4 (0x1800-0x18ff) for rid 1c of pcib5
>pcib5: allocating non-ISA range 0x1c00-0x1cff
>pcib0: allocated type 4 (0x1c00-0x1cff) for rid 1c of pcib5
>pcib5: failed to allocate initial memory window: 0xe0100000-0xe01fffff
>pcib5:   domain            0
>pcib5:   secondary bus     5
>pcib5:   subordinate bus   6
>pcib5:   I/O decode        0x1000-0x1fff
>pcib5:   special decode    ISA, subtractive
>pci5: <ACPI PCI bus> on pcib5
>pci5: domain=0, physical bus=5
>found->	vendor=0x1011, dev=0x0024, revid=0x03
>	domain=0, bus=5, slot=0, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0207, statreg=0x0290, cachelnsz=16 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x84 (33000 ns), maxlat=0x00 (0 ns)
>	powerspec 1  supports D0 D3  current D0
>pcib6: <PCI-PCI bridge> at device 0.0 on pci5
>pcib6: allocating non-ISA range 0x1000-0x10ff
>pcib5: allocated I/O port range (0x1000-0x10ff) for rid 1c of pcib6
>pcib6: allocating non-ISA range 0x1400-0x14ff
>pcib5: allocated I/O port range (0x1400-0x14ff) for rid 1c of pcib6
>pcib6: allocating non-ISA range 0x1800-0x18ff
>pcib5: allocated I/O port range (0x1800-0x18ff) for rid 1c of pcib6
>pcib6: allocating non-ISA range 0x1c00-0x1cff
>pcib5: allocated I/O port range (0x1c00-0x1cff) for rid 1c of pcib6
>pcib6: failed to allocate initial memory window: 0xe0100000-0xe01fffff
>pcib6:   domain            0
>pcib6:   secondary bus     6
>pcib6:   subordinate bus   6
>pcib6:   I/O decode        0x1000-0x1fff
>pcib6:   special decode    ISA
>pci6: <PCI bus> on pcib6
>pci6: domain=0, physical bus=6
>found->	vendor=0x1011, dev=0x0019, revid=0x41
>	domain=0, bus=6, slot=4, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0017, statreg=0x0280, cachelnsz=16 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
>	intpin=a, irq=9
>	map[10]: type I/O Port, range 32, base 0x1180, size  7, enabled
>pcib6: I/O range 0x1180-0x11ff overlaps with an ISA alias
>pci6: pci0:6:4:0 bar 0x10 failed to allocate
>	map[14]: type Memory, range 32, base 0xe0100c00, size 10, enabled
>pcib6: failed to allocate initial memory window (0xe0100c00-0xe0100fff,0x400)
>pci6: pci0:6:4:0 bar 0x14 failed to allocate
>pcib5: matched entry for 5.0.INTA
>pcib5: slot 0 INTA hardwired to IRQ 21
>pcib6: slot 4 INTA is routed to irq 21
>found->	vendor=0x1011, dev=0x0019, revid=0x41
>	domain=0, bus=6, slot=5, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0017, statreg=0x0280, cachelnsz=16 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
>	intpin=a, irq=10
>	map[10]: type I/O Port, range 32, base 0x1100, size  7, enabled
>pcib6: I/O range 0x1100-0x117f overlaps with an ISA alias
>pci6: pci0:6:5:0 bar 0x10 failed to allocate
>	map[14]: type Memory, range 32, base 0xe0100800, size 10, enabled
>pcib6: failed to allocate initial memory window (0xe0100800-0xe0100bff,0x400)
>pci6: pci0:6:5:0 bar 0x14 failed to allocate
>pcib5: matched entry for 5.0.INTB
>pcib5: slot 0 INTB hardwired to IRQ 22
>pcib6: slot 5 INTA is routed to irq 22
>found->	vendor=0x1011, dev=0x0019, revid=0x41
>	domain=0, bus=6, slot=6, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0017, statreg=0x0280, cachelnsz=16 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
>	intpin=a, irq=9
>	map[10]: type I/O Port, range 32, base 0x1080, size  7, enabled
>pcib6: allocated I/O port range (0x1080-0x10ff) for rid 10 of pci0:6:6:0
>	map[14]: type Memory, range 32, base 0xe0100400, size 10, enabled
>pcib6: failed to allocate initial memory window (0xe0100400-0xe01007ff,0x400)
>pci6: pci0:6:6:0 bar 0x14 failed to allocate
>pcib5: matched entry for 5.0.INTC
>pcib5: slot 0 INTC hardwired to IRQ 23
>pcib6: slot 6 INTA is routed to irq 23
>found->	vendor=0x1011, dev=0x0019, revid=0x41
>	domain=0, bus=6, slot=7, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0017, statreg=0x0280, cachelnsz=16 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
>	intpin=a, irq=11
>	map[10]: type I/O Port, range 32, base 0x1000, size  7, enabled
>pcib6: allocated I/O port range (0x1000-0x107f) for rid 10 of pci0:6:7:0
>	map[14]: type Memory, range 32, base 0xe0100000, size 10, enabled
>pcib6: failed to allocate initial memory window (0xe0100000-0xe01003ff,0x400)
>pci6: pci0:6:7:0 bar 0x14 failed to allocate
>pcib5: matched entry for 5.0.INTD
>pcib5: slot 0 INTD hardwired to IRQ 20
>pcib6: slot 7 INTA is routed to irq 20
>dc0: <Intel 21143 10/100BaseTX> irq 21 at device 4.0 on pci6
>pcib6: allocated I/O port range (0x1400-0x147f) for rid 10 of dc0
>dc0: Lazy allocation of 0x80 bytes rid 0x10 type 4 at 0x1400
>miibus0: <MII bus> on dc0
>nsphyter0: <DP83843 10/100 media interface> PHY 1 on miibus0
>nsphyter0: OUI 0x1000e8, model 0x0001, rev. 0
>nsphyter0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>dc0: bpf attached
>dc0: Ethernet address: 00:80:c8:b9:19:4d
>ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 56
>dc1: <Intel 21143 10/100BaseTX> irq 22 at device 5.0 on pci6
>pcib6: allocated I/O port range (0x1480-0x14ff) for rid 10 of dc1
>dc1: Lazy allocation of 0x80 bytes rid 0x10 type 4 at 0x1480
>miibus1: <MII bus> on dc1
>nsphyter1: <DP83843 10/100 media interface> PHY 1 on miibus1
>nsphyter1: OUI 0x1000e8, model 0x0001, rev. 0
>nsphyter1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>dc1: bpf attached
>dc1: Ethernet address: 00:80:c8:b9:19:4e
>ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 57
>dc2: <Intel 21143 10/100BaseTX> port 0x1080-0x10ff irq 23 at device 6.0 on pci6
>miibus2: <MII bus> on dc2
>nsphyter2: <DP83843 10/100 media interface> PHY 1 on miibus2
>nsphyter2: OUI 0x1000e8, model 0x0001, rev. 0
>nsphyter2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>dc2: bpf attached
>dc2: Ethernet address: 00:80:c8:b9:19:4f
>dc3: <Intel 21143 10/100BaseTX> port 0x1000-0x107f irq 20 at device 7.0 on pci6
>miibus3: <MII bus> on dc3
>nsphyter3: <DP83843 10/100 media interface> PHY 1 on miibus3
>nsphyter3: OUI 0x1000e8, model 0x0001, rev. 0
>nsphyter3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>dc3: bpf attached
>dc3: Ethernet address: 00:80:c8:b9:19:50
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH7 SATA300 controller> port 0x30b8-0x30bf,0x30cc-0x30cf,0x30b0-0x30b7,0x30c8-0x30cb,0x30a0-0x30af mem 0xe0380000-0xe03803ff irq 19 at device 31.2 on pci0
>ata2: <ATA channel> at channel 0 on atapci0
>ata3: <ATA channel> at channel 1 on atapci0
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0067
>atkbd: keyboard ID 0x41ab (2)
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
>atkbd0: [GIANT-LOCKED]
>psm0: unable to allocate IRQ
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59
>uart0: fast interrupt
>uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
>ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 60
>uart1: fast interrupt
>ACPI: Enabled 2 GPEs in block 00 to 1F
>ex_isa_identify()
>ahc_isa_identify 0: ioport 0xc00 alloc failed
>ahc_isa_identify 1: ioport 0x1c00 alloc failed
>ahc_isa_identify 2: ioport 0x2c00 alloc failed
>ahc_isa_identify 3: ioport 0x3c00 alloc failed
>ahc_isa_identify 4: ioport 0x4c00 alloc failed
>ahc_isa_identify 5: ioport 0x5c00 alloc failed
>ahc_isa_identify 6: ioport 0x6c00 alloc failed
>ahc_isa_identify 7: ioport 0x7c00 alloc failed
>ahc_isa_identify 8: ioport 0x8c00 alloc failed
>ahc_isa_identify 9: ioport 0x9c00 alloc failed
>ahc_isa_identify 10: ioport 0xac00 alloc failed
>ahc_isa_identify 11: ioport 0xbc00 alloc failed
>ahc_isa_identify 12: ioport 0xcc00 alloc failed
>ahc_isa_identify 13: ioport 0xdc00 alloc failed
>ahc_isa_identify 14: ioport 0xec00 alloc failed
>pnp_identify: Trying Read_Port at 203
>pnp_identify: Trying Read_Port at 243
>pnp_identify: Trying Read_Port at 283
>pnp_identify: Trying Read_Port at 2c3
>pnp_identify: Trying Read_Port at 303
>pnp_identify: Trying Read_Port at 343
>pnp_identify: Trying Read_Port at 383
>pnp_identify: Trying Read_Port at 3c3
>PNP Identify complete
>pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>isa_probe_children: disabling PnP devices
>pmtimer0 on isa0
>atkbdc: atkbdc0 already exists; skipping it
>atrtc: atrtc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>sc: sc0 already exists; skipping it
>uart: uart0 already exists; skipping it
>uart: uart1 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
>pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
>pcib0: allocated type 4 (0x1f0-0x1f7) for rid 0 of ata0
>pcib0: allocated type 4 (0x3f6-0x3f6) for rid 1 of ata0
>pcib0: allocated type 4 (0x1f0-0x1f7) for rid 0 of ata0
>pcib0: allocated type 4 (0x3f6-0x3f6) for rid 1 of ata0
>ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
>pcib0: allocated type 4 (0x1f0-0x1f7) for rid 0 of ata0
>pcib0: allocated type 4 (0x3f6-0x3f6) for rid 1 of ata0
>ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 61
>pcib0: allocated type 4 (0x170-0x177) for rid 0 of ata1
>pcib0: allocated type 4 (0x376-0x376) for rid 1 of ata1
>pcib0: allocated type 4 (0x170-0x177) for rid 0 of ata1
>pcib0: allocated type 4 (0x376-0x376) for rid 1 of ata1
>ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
>pcib0: allocated type 4 (0x170-0x177) for rid 0 of ata1
>pcib0: allocated type 4 (0x376-0x376) for rid 1 of ata1
>ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 62
>pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
>pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: parallel port not found.
>ppc0 failed to probe at irq 7 on isa0
>wbwd0 failed to probe on isa0
>isa_probe_children: probing PnP devices
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>p4tcc1: <CPU Frequency Thermal Control> on cpu1
>p4tcc2: <CPU Frequency Thermal Control> on cpu2
>p4tcc3: <CPU Frequency Thermal Control> on cpu3
>Device configuration finished.
>procfs registered
>Timecounters tick every 1.000 msec
>vlan: initialized, using hash tables with chaining
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768
>lo0: bpf attached
>hpt27xx: no controller detected.
>hptrr: no controller detected.
>hptnr: no controller detected.
>random: unblocking device.
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 12Mbps Full Speed USB v1.0
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 12Mbps Full Speed USB v1.0
>usbus4: 480Mbps High Speed USB v2.0
>ugen1.1: <Intel> at usbus1
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ugen0.1: <Intel> at usbus0
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen3.1: <Intel> at usbus3
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>ugen2.1: <Intel> at usbus2
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen4.1: <Intel> at usbus4
>uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
>uhub0: 2 ports with 2 removable, self powered
>uhub1: 2 ports with 2 removable, self powered
>uhub2: 2 ports with 2 removable, self powered
>uhub3: 2 ports with 2 removable, self powered
>ata2: SATA reset: ports status=0x01
>ata2: p0: SATA connect time=0ms status=00000123
>ata2: p1: hard reset ...
>ata2: p1: hard reset failed
>ata2: reset tp1 mask=03 ostat0=50 ostat1=00
>ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
>ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
>ata2: reset tp2 stat0=50 stat1=00 devices=0x1
>ata3: SATA reset: ports status=0x00
>ata3: p0: SATA connect timeout status=00000000
>ata3: p1: hard reset ...
>ata3: p1: hard reset failed
>ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
>ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
>ada0 at ata2 bus 0 scbus0 target 0 lun 0
>GEOM: new disk ada0
>ada0: <WDC WD800JD-75MSA3 10.01E04> ATA-7 SATA 2.x device
>ada0: Serial Number WD-WMAM9ZL59310
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>ada0: 76293MB (156250000 512 byte sectors: 16H 63S/T 16383C)
>ada0: Previously was known as ad4
>pass0 at ata2 bus 0 scbus0 target 0 lun 0
>pass0: <WDC WD800JD-75MSA3 10.01E04> ATA-7 SATA 2.x device
>pass0: Serial Number WD-WMAM9ZL59310
>pass0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>lapic1: Forcing LINT1 to edge trigger
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>lapic3: Forcing LINT1 to edge trigger
>SMP: AP CPU #3 Launched!
>cpu3 AP:
>     ID: 0x03000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>lapic2: Forcing LINT1 to edge trigger
>SMP: AP CPU #2 Launched!
>cpu2 AP:
>     ID: 0x02000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 2 vector 48
>ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 2 vector 49
>ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 2 vector 50
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 2 vector 51
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 2 vector 52
>ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 2 vector 53
>SMP: passed TSC synchronization test
>Timecounter "TSC" frequency 1666724860 Hz quality 1000
>Root mount waiting for: usbus4
>Root mount waiting for: usbus4
>uhub4: 8 ports with 8 removable, self powered
>Trying to mount root from ufs:/dev/ada0s3a [rw]...
>start_init: trying /sbin/init

Actions: View

Attachments on bug 188897: 141967 | 151998 | 152106