Attachment 158237 Details for Bug 199495 – /var/run/dmesg.boot file from v11

/var/run/dmesg.boot file from v11

dmesg.boot_v11 (text/plain), 36.19 KB, created by Yudi on 2015-07-01 19:29:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Yudi

Created: 2015-07-01 19:29:37 UTC

Size: 36.19 KB

patch

obsolete

>Table 'FACP' at 0xd7fa0290
>Table 'APIC' at 0xd7fa0390
>APIC: Found table at 0xd7fa0390
>APIC: Using the MADT enumerator.
>MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
>SMP: Added CPU 1 (AP)
>MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
>MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
>Copyright (c) 1992-2015 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 11.0-CURRENT #0 r283160: Wed May 20 20:51:41 UTC 2015
>    root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
>FreeBSD clang version 3.6.0 (tags/RELEASE_360/final 230434) 20150225
>WARNING: WITNESS option enabled, expect reduced performance.
>VT: running with driver "vga".
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81fca000.
>Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff81fcad88.
>Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff81fcb570.
>Calibrating TSC clock ... TSC clock: 1497538961 Hz
>CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)
>  Origin="AuthenticAMD"  Id=0x100f63  Family=0x10  Model=0x6  Stepping=3
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x802009<SSE3,MON,CX16,POPCNT>
>  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
>  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
>  SVM: Features=0xf<NP,LbrVirt,SVML,NRIPS>
>Revision=1, ASIDs=64
>  TSC: P-state invariant
>L1 2MB data TLB: 48 entries, fully associative
>L1 2MB instruction TLB: 16 entries, fully associative
>L1 4KB data TLB: 48 entries, fully associative
>L1 4KB instruction TLB: 32 entries, fully associative
>L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L2 2MB data TLB: 128 entries, 2-way associative
>L2 2MB instruction TLB: 0 entries, 2-way associative
>L2 4KB data TLB: 512 entries, 4-way associative
>L2 4KB instruction TLB: 512 entries, 4-way associative
>L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
>real memory  = 4294967296 (4096 MB)
>Physical memory chunk(s):
>0x0000000000010000 - 0x000000000009afff, 569344 bytes (139 pages)
>0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
>0x0000000001ff4000 - 0x00000000d09e4fff, 3466530816 bytes (846321 pages)
>0x00000000d7f9e000 - 0x00000000d7f9ffff, 8192 bytes (2 pages)
>0x0000000100000000 - 0x000000011ffe7fff, 536772608 bytes (131048 pages)
>avail memory = 3968880640 (3785 MB)
>Event timer "LAPIC" quality 400
>ACPI APIC Table: <HP     ProLiant>
>INTR: Adding local APIC 1 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 2 core(s)
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 2
>x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
>x86bios: SSEG 0x09a000-0x09afff at 0xfffffe00eef8e000
>x86bios: EBDA 0x09e000-0x09ffff at 0xfffff8000009e000
>x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
>ULE: setup cpu 0
>ULE: setup cpu 1
>ACPI: RSDP 0x00000000000F8F50 000024 (v02 HP    )
>ACPI: XSDT 0x00000000D7FA0100 00007C (v01 HP     ProLiant 20131001 HP   00000097)
>ACPI: FACP 0x00000000D7FA0290 0000F4 (v03 HP     ProLiant 20131001 HP   00000097)
>ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150515/tbfadt-644)
>ACPI: DSDT 0x00000000D7FA0620 006868 (v01 HP     ProLiant 00000006 INTL 20051117)
>ACPI: FACS 0x00000000D7FAE000 000040
>ACPI: APIC 0x00000000D7FA0390 000072 (v01 HP     ProLiant 20131001 HP   00000097)
>ACPI: MCFG 0x00000000D7FA0410 00003C (v01 HP     ProLiant 20131001 HP   00000097)
>ACPI: SPMI 0x00000000D7FA0450 000041 (v05 HP     ProLiant 20131001 HP   00000097)
>ACPI: OEMB 0x00000000D7FAE040 000072 (v01 HP     ProLiant 20131001 HP   00000097)
>ACPI: HPET 0x00000000D7FAB4E0 000038 (v01 HP     ProLiant 20131001 HP   00000097)
>ACPI: EINJ 0x00000000D7FAB520 000130 (v01 AMIER  AMI_EINJ 20131001 HP   00000097)
>ACPI: BERT 0x00000000D7FAB6B0 000030 (v01 AMIER  AMI_BERT 20131001 HP   00000097)
>ACPI: ERST 0x00000000D7FAB6E0 0001B0 (v01 AMIER  AMI_ERST 20131001 HP   00000097)
>ACPI: HEST 0x00000000D7FAB890 0000A8 (v01 AMIER  ABC_HEST 20131001 HP   00000097)
>ACPI: SSDT 0x00000000D7FAB940 000458 (v01 HP     ProLiant 00000001 AMD  00000001)
>MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
>ioapic0: ver 0x21 maxredir 0x17
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>ioapic0: intpin 9 polarity: low
>lapic: Routing NMI -> LINT1
>lapic: LINT1 trigger: edge
>lapic: LINT1 polarity: high
>ioapic0 <Version 2.1> irqs 0-23 on motherboard
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>wlan: <802.11 Link Layer>
>random: entropy device infrastructure driver
>random: selecting highest priority adaptor <Dummy>
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>nfslock: pseudo-device
>netmap: loaded module
>null: <full device, null device, zero device>
>random: SOFT: yarrow init()
>random: selecting highest priority adaptor <Yarrow>
>module_register_init: MOD_LOAD (vesa, 0xffffffff80dfb950, 0) error 19
>io: <I/O>
>VMBUS: load
>hpt27xx: RocketRAID 27xx controller driver v1.1
>hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>hptnr: R750/DC7280 controller driver v1.1.1
>vtvga0: <VT VGA driver> on motherboard
>acpi0: <HP ProLiant> on motherboard
>ACPI: All ACPI Tables successfully acquired
>PCIe: Memory Mapped configuration base @ 0xe0000000
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>ACPI: Executed 2 blocks of module-level executable AML code
>ACPI: Dynamic OEM Table Load:
>ACPI: OEMN 0xFFFFF80002ED9000 000624 (v01 AMD    NAHP     00000001 INTL 20051117)
>acpi0: Power Button (fixed)
>acpi0: reservation of fee00000, 1000 (3) failed
>acpi0: reservation of ffb80000, 80000 (3) failed
>acpi0: reservation of fec10000, 20 (3) failed
>acpi0: reservation of fed80000, 1000 (3) failed
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, d7f00000 (3) failed
>cpu0: Processor \134_PR_.P001 (ACPI ID 1) -> APIC ID 0
>cpu0: <ACPI CPU> on acpi0
>cpu0: switching to generic Cx mode
>cpu1: Processor \134_PR_.P002 (ACPI ID 2) -> APIC ID 1
>cpu1: <ACPI CPU> on acpi0
>ACPI: Processor \134_PR_.P003 (ACPI ID 3) ignored
>ACPI: Processor \134_PR_.P004 (ACPI ID 4) ignored
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>hpet0: vendor 0x4353, rev 0x10, 14318180Hz, 3 timers, legacy route
>hpet0:  t0: irqs 0x00c00000 (0), MSI, periodic
>hpet0:  t1: irqs 0x00c00000 (0), MSI, periodic
>hpet0:  t2: irqs 0x00c00000 (0), MSI, periodic
>Timecounter "HPET" frequency 14318180 Hz quality 950
>msi: routing MSI-X IRQ 256 to local APIC 0 vector 51
>msi: routing MSI-X IRQ 257 to local APIC 0 vector 52
>msi: routing MSI-X IRQ 258 to local APIC 0 vector 53
>Event timer "HPET" frequency 14318180 Hz quality 550
>Event timer "HPET1" frequency 14318180 Hz quality 450
>ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 5 range 0-0xff
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0xd0000-0xdffff
>pcib0: decoding 3 range 0xd8000000-0xdfffffff
>pcib0: decoding 3 range 0xf0000000-0xfebfffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x1022, dev=0x9601, revid=0x00
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x103c, dev=0x9602, revid=0x00
>	domain=0, bus=0, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	secbus=1, subbus=1
>found->	vendor=0x1022, dev=0x9606, revid=0x00
>	domain=0, bus=0, slot=6, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.6.INTA
>pcib0: slot 6 INTA hardwired to IRQ 18
>	secbus=2, subbus=2
>found->	vendor=0x1002, dev=0x4391, revid=0x40
>	domain=0, bus=0, slot=17, func=0
>	class=01-06-01, hdrtype=0x00, mfdev=0
>	cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	MSI supports 4 messages, 64 bit
>	map[10]: type I/O Port, range 32, base 0xd000, size  3, enabled
>pcib0: allocated type 4 (0xd000-0xd007) for rid 10 of pci0:0:17:0
>	map[14]: type I/O Port, range 32, base 0xc000, size  2, enabled
>pcib0: allocated type 4 (0xc000-0xc003) for rid 14 of pci0:0:17:0
>	map[18]: type I/O Port, range 32, base 0xb000, size  3, enabled
>pcib0: allocated type 4 (0xb000-0xb007) for rid 18 of pci0:0:17:0
>	map[1c]: type I/O Port, range 32, base 0xa000, size  2, enabled
>pcib0: allocated type 4 (0xa000-0xa003) for rid 1c of pci0:0:17:0
>	map[20]: type I/O Port, range 32, base 0x9000, size  4, enabled
>pcib0: allocated type 4 (0x9000-0x900f) for rid 20 of pci0:0:17:0
>	map[24]: type Memory, range 32, base 0xfe6ffc00, size 10, enabled
>pcib0: allocated type 3 (0xfe6ffc00-0xfe6fffff) for rid 24 of pci0:0:17:0
>pcib0: matched entry for 0.17.INTA
>pcib0: slot 17 INTA hardwired to IRQ 19
>found->	vendor=0x1002, dev=0x4397, revid=0x00
>	domain=0, bus=0, slot=18, func=0
>	class=0c-03-10, hdrtype=0x00, mfdev=1
>	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[10]: type Memory, range 32, base 0xfe6fe000, size 12, enabled
>pcib0: allocated type 3 (0xfe6fe000-0xfe6fefff) for rid 10 of pci0:0:18:0
>pcib0: matched entry for 0.18.INTA
>pcib0: slot 18 INTA hardwired to IRQ 18
>ohci early: SMM active, request owner change
>found->	vendor=0x1002, dev=0x4396, revid=0x00
>	domain=0, bus=0, slot=18, func=2
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=7
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0xfe6ff800, size  8, enabled
>pcib0: allocated type 3 (0xfe6ff800-0xfe6ff8ff) for rid 10 of pci0:0:18:2
>pcib0: matched entry for 0.18.INTB
>pcib0: slot 18 INTB hardwired to IRQ 17
>found->	vendor=0x1002, dev=0x4397, revid=0x00
>	domain=0, bus=0, slot=19, func=0
>	class=0c-03-10, hdrtype=0x00, mfdev=1
>	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[10]: type Memory, range 32, base 0xfe6fd000, size 12, enabled
>pcib0: allocated type 3 (0xfe6fd000-0xfe6fdfff) for rid 10 of pci0:0:19:0
>pcib0: matched entry for 0.19.INTA
>pcib0: slot 19 INTA hardwired to IRQ 18
>ohci early: SMM active, request owner change
>found->	vendor=0x1002, dev=0x4396, revid=0x00
>	domain=0, bus=0, slot=19, func=2
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=7
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0xfe6ff400, size  8, enabled
>pcib0: allocated type 3 (0xfe6ff400-0xfe6ff4ff) for rid 10 of pci0:0:19:2
>pcib0: matched entry for 0.19.INTB
>pcib0: slot 19 INTB hardwired to IRQ 17
>found->	vendor=0x1002, dev=0x4385, revid=0x42
>	domain=0, bus=0, slot=20, func=0
>	class=0c-05-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1002, dev=0x439c, revid=0x40
>	domain=0, bus=0, slot=20, func=1
>	class=01-01-8a, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0220, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=255
>pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:20:1
>pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:20:1
>pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:20:1
>pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:20:1
>	map[20]: type I/O Port, range 32, base 0xff00, size  4, enabled
>pcib0: allocated type 4 (0xff00-0xff0f) for rid 20 of pci0:0:20:1
>found->	vendor=0x1002, dev=0x439d, revid=0x40
>	domain=0, bus=0, slot=20, func=3
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1002, dev=0x4384, revid=0x40
>	domain=0, bus=0, slot=20, func=4
>	class=06-04-01, hdrtype=0x01, mfdev=1
>	cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	secbus=3, subbus=3
>found->	vendor=0x1002, dev=0x4397, revid=0x00
>	domain=0, bus=0, slot=22, func=0
>	class=0c-03-10, hdrtype=0x00, mfdev=1
>	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[10]: type Memory, range 32, base 0xfe6fc000, size 12, enabled
>pcib0: allocated type 3 (0xfe6fc000-0xfe6fcfff) for rid 10 of pci0:0:22:0
>pcib0: matched entry for 0.22.INTA
>pcib0: slot 22 INTA hardwired to IRQ 18
>ohci early: SMM active, request owner change
>found->	vendor=0x1002, dev=0x4396, revid=0x00
>	domain=0, bus=0, slot=22, func=2
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=7
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0xfe6ff000, size  8, enabled
>pcib0: allocated type 3 (0xfe6ff000-0xfe6ff0ff) for rid 10 of pci0:0:22:2
>pcib0: matched entry for 0.22.INTB
>pcib0: slot 22 INTB hardwired to IRQ 17
>found->	vendor=0x1022, dev=0x1200, revid=0x00
>	domain=0, bus=0, slot=24, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1201, revid=0x00
>	domain=0, bus=0, slot=24, func=1
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1202, revid=0x00
>	domain=0, bus=0, slot=24, func=2
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1203, revid=0x00
>	domain=0, bus=0, slot=24, func=3
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1204, revid=0x00
>	domain=0, bus=0, slot=24, func=4
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib1
>pcib0: allocated type 3 (0xfe700000-0xfe8fffff) for rid 20 of pcib1
>pcib0: allocated type 3 (0xf0000000-0xf7ffffff) for rid 24 of pcib1
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0xe000-0xefff
>pcib1:   memory decode     0xfe700000-0xfe8fffff
>pcib1:   prefetched decode 0xf0000000-0xf7ffffff
>pcib1:   special decode    VGA
>pci1: <ACPI PCI bus> on pcib1
>pcib1: allocated bus range (1-1) for rid 0 of pci1
>pci1: domain=0, physical bus=1
>found->	vendor=0x1002, dev=0x9712, revid=0x00
>	domain=0, bus=1, slot=5, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 27, enabled
>pcib1: allocated prefetch range (0xf0000000-0xf7ffffff) for rid 10 of pci0:1:5:0
>	map[14]: type I/O Port, range 32, base 0xe000, size  8, enabled
>pcib1: allocated I/O port range (0xe000-0xe0ff) for rid 14 of pci0:1:5:0
>	map[18]: type Memory, range 32, base 0xfe8f0000, size 16, enabled
>pcib1: allocated memory range (0xfe8f0000-0xfe8fffff) for rid 18 of pci0:1:5:0
>	map[24]: type Memory, range 32, base 0xfe700000, size 20, enabled
>pcib1: allocated memory range (0xfe700000-0xfe7fffff) for rid 24 of pci0:1:5:0
>pcib1: matched entry for 1.5.INTA
>pcib1: slot 5 INTA hardwired to IRQ 18
>vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xf0000000-0xf7ffffff,0xfe8f0000-0xfe8fffff,0xfe700000-0xfe7fffff irq 18 at device 5.0 on pci1
>vgapci0: Boot video device
>pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
>pcib0: allocated type 3 (0xfe900000-0xfe9fffff) for rid 20 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   memory decode     0xfe900000-0xfe9fffff
>pcib2:   special decode    ISA
>pci2: <ACPI PCI bus> on pcib2
>pcib2: allocated bus range (2-2) for rid 0 of pci2
>pci2: domain=0, physical bus=2
>found->	vendor=0x14e4, dev=0x165b, revid=0x10
>	domain=0, bus=2, slot=0, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xfe9f0000, size 16, enabled
>pcib2: allocated memory range (0xfe9f0000-0xfe9fffff) for rid 10 of pci0:2:0:0
>pcib2: matched entry for 2.0.INTA
>pcib2: slot 0 INTA hardwired to IRQ 18
>bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci2
>bge0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 259 to local APIC 0 vector 54
>bge0: using IRQ 259 for MSI
>bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
>bge0: Disabling fastboot
>miibus0: <MII bus> on bge0
>brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
>brgphy0: OUI 0x000af7, model 0x003a, rev. 4
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>bge0: Using defaults for TSO: 65518/35/2048
>bge0: bpf attached
>bge0: Ethernet address: a0:b3:cc:e0:0b:d7
>ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xfe6ffc00-0xfe6fffff irq 19 at device 17.0 on pci0
>ahci0: attempting to allocate 1 MSI vectors (4 supported)
>msi: routing MSI IRQ 260 to local APIC 0 vector 55
>ahci0: using IRQ 260 for MSI
>ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported
>ahci0: quirks=0x1b5f0<ATI_PMP_BUG,1MSI,FORCE_PI>
>ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 4ports
>ahci0: Caps2:
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich0: Caps:
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich1: Caps:
>ahcich2: <AHCI channel> at channel 2 on ahci0
>ahcich2: Caps:
>ahcich3: <AHCI channel> at channel 3 on ahci0
>ahcich3: Caps:
>ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fe000-0xfe6fefff irq 18 at device 18.0 on pci0
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 56
>usbus0 on ohci0
>ohci0: usbpf: Attached
>ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff800-0xfe6ff8ff irq 17 at device 18.2 on pci0
>ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 57
>ehci0: Dropped interrupts workaround enabled
>usbus1: EHCI version 1.0
>usbus1 on ehci0
>ehci0: usbpf: Attached
>ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fd000-0xfe6fdfff irq 18 at device 19.0 on pci0
>usbus2 on ohci1
>ohci1: usbpf: Attached
>ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff400-0xfe6ff4ff irq 17 at device 19.2 on pci0
>ehci1: Dropped interrupts workaround enabled
>usbus3: EHCI version 1.0
>usbus3 on ehci1
>ehci1: usbpf: Attached
>pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
>atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
>atapci0: SATA controller disabled (primary channel)
>ata0: <ATA channel> at channel 0 on atapci0
>ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 58
>ata1: <ATA channel> at channel 1 on atapci0
>ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 59
>isab0: <PCI-ISA bridge> at device 20.3 on pci0
>isa0: <ISA bus> on isab0
>pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   special decode    ISA, subtractive
>pcib3: could not get PCI interrupt routing table for \134_SB_.PCI0.P0PC - AE_NOT_FOUND
>pci3: <ACPI PCI bus> on pcib3
>pcib3: allocated bus range (3-3) for rid 0 of pci3
>pci3: domain=0, physical bus=3
>ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe6fc000-0xfe6fcfff irq 18 at device 22.0 on pci0
>usbus4 on ohci2
>ohci2: usbpf: Attached
>ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe6ff000-0xfe6ff0ff irq 17 at device 22.2 on pci0
>ehci2: Dropped interrupts workaround enabled
>usbus5: EHCI version 1.0
>usbus5 on ehci2
>ehci2: usbpf: Attached
>acpi_button0: <Power Button> on acpi0
>ACPI: Enabled 4 GPEs in block 00 to 1F
>acpi0: wakeup code va 0xfffffe0119944000 pa 0x90000
>ahc_isa_identify 0: ioport 0xc00 alloc failed
>ahc_isa_identify 1: ioport 0x1c00 alloc failed
>ahc_isa_identify 2: ioport 0x2c00 alloc failed
>ahc_isa_identify 3: ioport 0x3c00 alloc failed
>ahc_isa_identify 4: ioport 0x4c00 alloc failed
>ahc_isa_identify 5: ioport 0x5c00 alloc failed
>ahc_isa_identify 6: ioport 0x6c00 alloc failed
>ahc_isa_identify 7: ioport 0x7c00 alloc failed
>ahc_isa_identify 8: ioport 0x8c00 alloc failed
>ahc_isa_identify 9: ioport 0x9c00 alloc failed
>ahc_isa_identify 10: ioport 0xac00 alloc failed
>ahc_isa_identify 11: ioport 0xbc00 alloc failed
>ahc_isa_identify 12: ioport 0xcc00 alloc failed
>ahc_isa_identify 13: ioport 0xdc00 alloc failed
>ahc_isa_identify 14: ioport 0xec00 alloc failed
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xda000-0xda7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xda800-0xdafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdd800-0xddfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xde000-0xde7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xde800-0xdefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdf800-0xdffff) for rid 0 of orm0
>isa_probe_children: disabling PnP devices
>atrtc: atrtc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>sc: sc0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>sc0 failed to probe on isa0
>vga0 failed to probe on isa0
>pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
>pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
>atkbdc0: AT keyboard controller not found
>atkbdc0 failed to probe at port 0x60,0x64 on isa0
>pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
>pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: cannot reserve I/O port range
>ppc0 failed to probe at irq 7 on isa0
>pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
>uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
>pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
>uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>wbwd0 failed to probe on isa0
>isa_probe_children: probing PnP devices
>hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>Device configuration finished.
>procfs registered
>ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
>            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>vlan: initialized, using hash tables with chaining
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768
>lo0: bpf attached
>hpt27xx: no controller detected.
>hptrr: no controller detected.
>hptnr: no controller detected.
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 480Mbps High Speed USB v2.0
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>usbus4: 12Mbps Full Speed USB v1.0
>usbus5: 480Mbps High Speed USB v2.0
>ahcich0: AHCI reset...
>ugen0.1: <ATI> at usbus0
>uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <ATI> at usbus1
>uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>ugen2.1: <ATI> at usbus2
>uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen3.1: <ATI> at usbus3
>uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>ugen4.1: <ATI> at usbus4
>uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>ugen5.1: <ATI> at usbus5
>uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
>ahcich0: SATA connect time=100us status=00000123
>ahcich0: AHCI reset: device found
>ahcich1: AHCI reset...
>ahcich1: SATA connect timeout time=10000us status=00000000
>ahcich1: AHCI reset: device not found
>ahcich2: AHCI reset...
>ahcich2: SATA connect time=100us status=00000123
>ahcich2: AHCI reset: device found
>ahcich2: AHCI reset: device ready after 1ms
>ahcich3: AHCI reset...
>ahcich3: SATA connect timeout time=10000us status=00000000
>ahcich3: AHCI reset: device not found
>ata0: reset tp1 mask=03 ostat0=50 ostat1=50
>ahcich0: AHCI reset: device ready after 100ms
>ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
>ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
>ata0: reset tp2 stat0=50 stat1=50 devices=0x3
>ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>uhub4: 4 ports with 4 removable, self powered
>uhub0: 5 ports with 5 removable, self powered
>uhub2: 5 ports with 5 removable, self powered
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>uhub5: 4 ports with 4 removable, self powered
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>uhub1: 5 ports with 5 removable, self powered
>uhub3: 5 ports with 5 removable, self powered
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
>ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff
>ata1: reset tp2 stat0=ff stat1=ff devices=0x0
>ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>ada0: <Hitachi HDS723030ALA640 MKAOAA10> ATA8-ACS SATA 3.x device
>ada0: Serial Number MK0301YHKT8A2A
>GEOM: new disk ada0
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada0: Command Queueing enabled
>ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
>ada0: Previously was known as ad4
>ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
>ada1: <Hitachi HDS723030ALA640 MKAOAA10> ATA8-ACS SATA 3.x device
>ada1: Serial Number MK0301YHKV1JWD
>ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada1: Command Queueing enabled
>ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
>ada1: Previously was known as ad8
>ada2 at ata0 bus 0 scbus4 target 0 lun 0
>ada2: <SAMSUNG HM080HI AB100-17> ATA-7 SATA 1.x device
>ada2: Serial Number S0ZAJD0P700102
>ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
>ada2: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
>ada2: Previously was known as ad0
>ada3 at ata0 bus 0 scbus4 target 1 lun 0
>ada3: <SAMSUNG HM080HI AB100-17> ATA-7 SATA 1.x device
>ada3: Serial Number S0ZAJD0P700140
>ada3: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
>ada3: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
>ada3: Previously was known as ad1
>pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
>pass0: <Hitachi HDS723030ALA640 MKAOAA10> ATA8-ACS SATA 3.x device
>pass0: Serial Number MK0301YHKT8A2A
>pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass0: Command Queueing enabled
>pass1 at ahcich2 bus 0 scbus2 target 0 lun 0
>pass1: <Hitachi HDS723030ALA640 MKAOAA10> ATA8-ACS SATA 3.x device
>pass1: Serial Number MK0301YHKV1JWD
>pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass1: Command Queueing enabled
>pass2 at ata0 bus 0 scbus4 target 0 lun 0
>pass2: <SAMSUNG HM080HI AB100-17> ATA-7 SATA 1.x device
>pass2: Serial Number S0ZAJD0P700102
>pass2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
>pass3 at ata0 bus 0 scbus4 target 1 lun 0
>pass3: <SAMSUNG HM080HI AB100-17> ATA-7 SATA 1.x device
>pass3: Serial Number S0ZAJD0P700140
>pass3: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
>random: unblocking device.
>Netvsc initializing... done!
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
>ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 49
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50
>msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 51
>msi: Assigning MSI IRQ 260 to local APIC 1 vector 52
>SMP: passed TSC synchronization test
>Timecounter "TSC" frequency 1497538961 Hz quality 800
>WARNING: WITNESS option enabled, expect reduced performance.
>GEOM: new disk ada1
>GEOM: new disk ada2
>GEOM: new disk ada3
>Trying to mount root from zfs:osysPool/ROOT/201505os11curt []...
>ugen0.2: <CHICONY> at usbus0
>ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 2> on usbus0
>kbd2 at ukbd0
>kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
>ugen0.3: <Logitech> at usbus0
>start_init: trying /sbin/init
>bge0: Disabling fastboot
>bge0: Disabling fastboot
>bge0: link state changed to DOWN
>bge0: link state changed to UP
>ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 3> on usbus0
>ums0: 3 buttons and [XYZ] coordinates ID=0

Actions: View

Attachments on bug 199495: 158218 | 158236 | 158237 | 158260 | 158282 | 158338 | 158562 | 158570 | 158572 | 158605