Attachment 158900 Details for Bug 201642 – panic-10.2-BETA1-r285386-IPSEC-verbose-dmesg.txt

panic-10.2-BETA1-r285386-IPSEC-verbose-dmesg.txt

panic-10.2-BETA1-r285386-IPSEC-verbose-dmesg.txt (text/plain), 55.69 KB, created by Jason Unovitch on 2015-07-17 04:02:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jason Unovitch

Created: 2015-07-17 04:02:18 UTC

Size: 55.69 KB

patch

obsolete

>  ______               ____   _____ _____  
> |  ____|             |  _ \ / ____|  __ \ 
> | |___ _ __ ___  ___ | |_) | (___ | |  | |
> |  ___| '__/ _ \/ _ \|  _ < \___ \| |  | |
> | |   | | |  __/  __/| |_) |____) | |__| |
> | |   | | |    |    ||     |      |      |
> |_|   |_|  \___|\___||____/|_____/|_____/    ```                        `
>                                             s` `.....---.......--.```   -/
> +============Welcome to FreeBSD===========+ +o   .--`         /y:`      +.
> |                                         |  yo`:.            :o      `+-
> |  1. Boot Multi User [Enter]             |   y/               -/`   -o/
> |  2. Boot [S]ingle User                  |  .-                  ::/sy+:.
> |  3. [Esc]ape to loader prompt           |  /                     `--  /
> |  4. Reboot                              | `:                          :`
> |                                         | `:                          :`
> |  Options:                               |  /                          /
> |  5. [K]ernel: kernel (1 of 2)           |  .-                        -.
> |  6. Configure Boot [O]ptions...         |   --                      -.
> |                                         |    `:`                  `:`
> |                                         |      .--             `--.
> |                                         |         .---.....----. 
> +=========================================+
>                                          
>
>/boot/kernel/kernel text=0xfb6b5c data=0xdd08c+0x162408 syms=[0x4+0xdb110+0x4+0x163bd2]
>Booting...
>SMAP type=01 base=0000000000000000 len=000000000009b000
>SMAP type=02 base=000000000009b000 len=0000000000005000
>SMAP type=02 base=00000000000f0000 len=0000000000010000
>SMAP type=01 base=0000000000100000 len=000000007fee0000
>SMAP type=02 base=000000007ffe0000 len=0000000000020000
>SMAP type=02 base=00000000fff00000 len=0000000000100000
>SMAP type=02 base=00000000fec00000 len=0000000000001000
>SMAP type=02 base=00000000fee00000 len=0000000000001000
>MP Configuration Table version 1.4 found at 0xc00fe110
>ACPI BIOS Error (bug): A valid RSDP was not found (20150515/tbxfroot-258)
>APIC: Using the MPTable enumerator.
>SMP: Added CPU 0 (BSP)
>SMP: Added CPU 1 (AP)
>Copyright (c) 1992-2015 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 10.2-BETA1 #0 r285386: Sat Jul 11 14:36:02 UTC 2015
>    root@xts-bsd.:/usr/obj/nanobsd.soekris/i386.i386/usr/src/stable/10/sys/IPSEC i386
>FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc1837000.
>Calibrating TSC clock ... TSC clock: 1600034960 Hz
>CPU: Genuine Intel(R) CPU        @ 1.60GHz (1600.03-MHz 686-class CPU)
>  Origin="GenuineIntel"  Id=0x20661  Family=0x6  Model=0x26  Stepping=1
>  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x40e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
>  AMD Features=0x20100000<NX,LM>
>  AMD Features2=0x1<LAHF>
>  VT-x: (disabled in BIOS) Basic Features=0x5a0400<SMM,INS/OUTS>
>        Pin-Based Controls=0x3f<ExtINT,NMI,VNMI>
>        Primary Processor Controls=0x77f9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MSRmap,MONITOR,PAUSE>
>        Exit Controls=0x5a0400<PAT-LD,EFER-SV,PTMR-SV>
>        Entry Controls=0x5a0400
>  TSC: P-state invariant, performance statistics
>Data TLB0: 4 KByte pages, fully associative, 16 entries
>Data TLB1: 4 KByte pages, 4-way associative, 64 entries
>Instruction TLB: 4 KByte pages, 32 entries
>Data TLB: 4 KByte and 4 MByte pages, 4-way associative, 8 entries
>2nd-level cache: 512 KByte, 8-way set associative, 64-byte line size
>1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
>1st-level data cache: 24 KBytes, 6-way set associative, 64 byte line size
>L2 cache: 512 kbytes, 8-way associative, 64 bytes/line
>real memory  = 2147352576 (2047 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
>0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>0x0000000001c26000 - 0x000000007dd72fff, 2081738752 bytes (508237 pages)
>avail memory = 2081128448 (1984 MB)
>MPTable: <Soekris  net6501     >
>Event timer "LAPIC" quality 400
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP/HT): APIC ID:  1
>bios32: Found BIOS32 Service Directory header at 0xc00fac00
>bios32: Entry = 0xfac40 (c00fac40)  Rev = 0  Len = 1
>pcibios: PCI BIOS entry at 0xf0000+0xac61
>Other BIOS signatures found:
>XEN: CPU 0 has VCPU ID 4294967295
>XEN: CPU 1 has VCPU ID 4294967295
>random device not loaded; using insecure entropy
>ULE: setup cpu 0
>ULE: setup cpu 1
>ioapic0: Assuming intbase of 0
>ioapic0: Routing external 8259A's -> intpin 0
>ioapic0: Routing IRQ 0 -> intpin 2
>lapic: Routing ExtINT -> LINT0
>lapic: Routing NMI -> LINT1
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>wlan: <802.11 Link Layer>
>Hardware, Intel Secure Key RNG: RDRAND is not present
>Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
>kbd0 at kbdmux0
>mem: <memory>
>Pentium Pro MTRR support enabled
>null: <null device, zero device>
>nfslock: pseudo-device
>crypto: <crypto core>
>Falling back to <Software, Yarrow> random adaptor
>random: <Software, Yarrow> initialized
>module_register_init: MOD_LOAD (vesa, 0xc0ff1640, 0) error 19
>VMBUS: load
>io: <I/O>
>hpt27xx: RocketRAID 27xx controller driver v1.2.7
>hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>hptnr: R750/DC7280 controller driver v1.1.4
>ACPI BIOS Error (bug): A valid RSDP was not found (20150515/tbxfroot-258)
>ACPI: Table initialisation failed: AE_NOT_FOUND
>ACPI: Try disabling either ACPI or apic support.
>cryptosoft0: <software crypto> on motherboard
>crypto: assign cryptosoft0 driver id 0, flags 100663296
>crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
>pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
>pci_open(1a):   mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=41148086)
>pcibios: BIOS version 2.01
>pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
>pci0: <PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found-> vendor=0x8086, dev=0x4114, revid=0x05
>        domain=0, bus=0, slot=0, func=0
>        class=06-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x8086, dev=0x8183, revid=0x00
>        domain=0, bus=0, slot=1, func=0
>        class=06-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x8086, dev=0x8184, revid=0x00
>        domain=0, bus=0, slot=23, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D3  current D0
>pcib0: slot 23 INTA routed to irq 16
>        secbus=1, subbus=2
>found-> vendor=0x8086, dev=0x8185, revid=0x00
>        domain=0, bus=0, slot=24, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        powerspec 2  supports D0 D3  current D0
>pcib0: slot 24 INTA routed to irq 17
>        secbus=3, subbus=7
>found-> vendor=0x8086, dev=0x8180, revid=0x00
>        domain=0, bus=0, slot=25, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=5
>        powerspec 2  supports D0 D3  current D0
>pcib0: slot 25 INTA routed to irq 18
>        secbus=8, subbus=12
>found-> vendor=0x8086, dev=0x8181, revid=0x00
>        domain=0, bus=0, slot=26, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=9
>        powerspec 2  supports D0 D3  current D0
>pcib0: slot 26 INTA routed to irq 19
>        secbus=13, subbus=13
>found-> vendor=0x8086, dev=0x8186, revid=0x00
>        domain=0, bus=0, slot=31, func=0
>        class=06-01-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0003, statreg=0x0000, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pcib1: <PCI-PCI bridge> irq 16 at device 23.0 on pci0
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   2
>pcib1:   I/O decode        0x1000-0x1fff
>pcib1:   memory decode     0xa0000000-0xa0ffffff
>pci1: <PCI bus> on pcib1
>pcib1: allocated bus range (1-1) for rid 0 of pci1
>pci1: domain=0, physical bus=1
>found-> vendor=0x8086, dev=0x8800, revid=0x01
>        domain=0, bus=1, slot=0, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D1 D3  current D0
>pcib0: slot 23 INTA routed to irq 16
>pcib1: slot 0 INTA is routed to irq 16
>        secbus=2, subbus=2
>pcib1: allocated bus range (2-2) for rid 0 of pci0:1:0:0
>pcib2: <PCI-PCI bridge> irq 16 at device 0.0 on pci1
>pcib1: allocated I/O port range (0x1000-0x1fff) for rid 1c of pcib2
>pcib1: allocated memory range (0xa0000000-0xa0ffffff) for rid 20 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   I/O decode        0x1000-0x1fff
>pcib2:   memory decode     0xa0000000-0xa0ffffff
>pci2: <PCI bus> on pcib2
>pcib2: allocated bus range (2-2) for rid 0 of pci2
>pci2: domain=0, physical bus=2
>found-> vendor=0x8086, dev=0x8801, revid=0x01
>        domain=0, bus=2, slot=0, func=0
>        class=ff-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[14]: type Memory, range 32, base 0xa0000000, size 11, enabled
>pcib2: allocated memory range (0xa0000000-0xa00007ff) for rid 14 of pci0:2:0:0
>found-> vendor=0x8086, dev=0x8802, revid=0x02
>        domain=0, bus=2, slot=0, func=1
>        class=02-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type I/O Port, range 32, base 0x1000, size  5, enabled
>pcib2: allocated I/O port range (0x1000-0x101f) for rid 10 of pci0:2:0:1
>        map[14]: type Memory, range 32, base 0xa0000800, size  9, enabled
>pcib2: allocated memory range (0xa0000800-0xa00009ff) for rid 14 of pci0:2:0:1
>pcib0: slot 23 INTA routed to irq 16
>pcib1: slot 0 INTA is routed to irq 16
>pcib2: slot 0 INTA is routed to irq 16
>found-> vendor=0x8086, dev=0x8803, revid=0x01
>        domain=0, bus=2, slot=0, func=2
>        class=ff-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[14]: type Memory, range 32, base 0xa0000a00, size  6, enabled
>pcib2: allocated memory range (0xa0000a00-0xa0000a3f) for rid 14 of pci0:2:0:2
>pcib0: slot 23 INTA routed to irq 16
>pcib1: slot 0 INTA is routed to irq 16
>pcib2: slot 0 INTA is routed to irq 16
>found-> vendor=0x8086, dev=0x8804, revid=0x02
>        domain=0, bus=2, slot=2, func=0
>        class=0c-03-10, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xa0000b00, size  8, enabled
>pcib2: allocated memory range (0xa0000b00-0xa0000bff) for rid 10 of pci0:2:2:0
>pcib0: slot 23 INTD routed to irq 19
>pcib1: slot 0 INTD is routed to irq 19
>pcib2: slot 2 INTB is routed to irq 19
>found-> vendor=0x8086, dev=0x8805, revid=0x02
>        domain=0, bus=2, slot=2, func=1
>        class=0c-03-10, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xa0000c00, size  8, enabled
>pcib2: allocated memory range (0xa0000c00-0xa0000cff) for rid 10 of pci0:2:2:1
>pcib0: slot 23 INTD routed to irq 19
>pcib1: slot 0 INTD is routed to irq 19
>pcib2: slot 2 INTB is routed to irq 19
>found-> vendor=0x8086, dev=0x8806, revid=0x02
>        domain=0, bus=2, slot=2, func=2
>        class=0c-03-10, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xa0000d00, size  8, enabled
>pcib2: allocated memory range (0xa0000d00-0xa0000dff) for rid 10 of pci0:2:2:2
>pcib0: slot 23 INTD routed to irq 19
>pcib1: slot 0 INTD is routed to irq 19
>pcib2: slot 2 INTB is routed to irq 19
>found-> vendor=0x8086, dev=0x8807, revid=0x02
>        domain=0, bus=2, slot=2, func=3
>        class=0c-03-20, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xa0000e00, size  8, enabled
>pcib2: allocated memory range (0xa0000e00-0xa0000eff) for rid 10 of pci0:2:2:3
>pcib0: slot 23 INTD routed to irq 19
>pcib1: slot 0 INTD is routed to irq 19
>pcib2: slot 2 INTB is routed to irq 19
>found-> vendor=0x8086, dev=0x8808, revid=0x02
>        domain=0, bus=2, slot=2, func=4
>        class=0c-03-fe, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[14]: type Memory, range 32, base 0xa0002000, size 13, enabled
>pcib2: allocated memory range (0xa0002000-0xa0003fff) for rid 14 of pci0:2:2:4
>pcib0: slot 23 INTD routed to irq 19
>pcib1: slot 0 INTD is routed to irq 19
>pcib2: slot 2 INTB is routed to irq 19
>found-> vendor=0x8086, dev=0x8809, revid=0x01
>        domain=0, bus=2, slot=4, func=0
>        class=08-05-01, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=5
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xa0004000, size  9, enabled
>pcib2: allocated memory range (0xa0004000-0xa00041ff) for rid 10 of pci0:2:4:0
>pcib0: slot 23 INTC routed to irq 18
>pcib1: slot 0 INTC is routed to irq 18
>pcib2: slot 4 INTC is routed to irq 18
>found-> vendor=0x8086, dev=0x880a, revid=0x01
>        domain=0, bus=2, slot=4, func=1
>        class=08-05-01, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=5
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xa0004200, size  9, enabled
>pcib2: allocated memory range (0xa0004200-0xa00043ff) for rid 10 of pci0:2:4:1
>pcib0: slot 23 INTC routed to irq 18
>pcib1: slot 0 INTC is routed to irq 18
>pcib2: slot 4 INTC is routed to irq 18
>found-> vendor=0x8086, dev=0x880b, revid=0x02
>        domain=0, bus=2, slot=6, func=0
>        class=01-06-01, hdrtype=0x00, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=d, irq=11
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[20]: type I/O Port, range 32, base 0x1020, size  5, enabled
>pcib2: allocated I/O port range (0x1020-0x103f) for rid 20 of pci0:2:6:0
>        map[24]: type Memory, range 32, base 0xa0004400, size 10, enabled
>pcib2: allocated memory range (0xa0004400-0xa00047ff) for rid 24 of pci0:2:6:0
>pcib0: slot 23 INTB routed to irq 17
>pcib1: slot 0 INTB is routed to irq 17
>pcib2: slot 6 INTD is routed to irq 17
>found-> vendor=0x8086, dev=0x880c, revid=0x02
>        domain=0, bus=2, slot=8, func=0
>        class=0c-03-10, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xa0004800, size  8, enabled
>pcib2: allocated memory range (0xa0004800-0xa00048ff) for rid 10 of pci0:2:8:0
>pcib0: slot 23 INTA routed to irq 16
>pcib1: slot 0 INTA is routed to irq 16
>pcib2: slot 8 INTA is routed to irq 16
>found-> vendor=0x8086, dev=0x880d, revid=0x02
>        domain=0, bus=2, slot=8, func=1
>        class=0c-03-10, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xa0004900, size  8, enabled
>pcib2: allocated memory range (0xa0004900-0xa00049ff) for rid 10 of pci0:2:8:1
>pcib0: slot 23 INTA routed to irq 16
>pcib1: slot 0 INTA is routed to irq 16
>pcib2: slot 8 INTA is routed to irq 16
>found-> vendor=0x8086, dev=0x880e, revid=0x02
>        domain=0, bus=2, slot=8, func=2
>        class=0c-03-10, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xa0004a00, size  8, enabled
>pcib2: allocated memory range (0xa0004a00-0xa0004aff) for rid 10 of pci0:2:8:2
>pcib0: slot 23 INTA routed to irq 16
>pcib1: slot 0 INTA is routed to irq 16
>pcib2: slot 8 INTA is routed to irq 16
>found-> vendor=0x8086, dev=0x880f, revid=0x02
>        domain=0, bus=2, slot=8, func=3
>        class=0c-03-20, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 32, base 0xa0004b00, size  8, enabled
>pcib2: allocated memory range (0xa0004b00-0xa0004bff) for rid 10 of pci0:2:8:3
>pcib0: slot 23 INTA routed to irq 16
>pcib1: slot 0 INTA is routed to irq 16
>pcib2: slot 8 INTA is routed to irq 16
>found-> vendor=0x8086, dev=0x8810, revid=0x00
>        domain=0, bus=2, slot=10, func=0
>        class=ff-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[14]: type Memory, range 32, base 0xa0004c00, size  8, enabled
>pcib2: allocated memory range (0xa0004c00-0xa0004cff) for rid 14 of pci0:2:10:0
>pcib0: slot 23 INTD routed to irq 19
>pcib1: slot 0 INTD is routed to irq 19
>pcib2: slot 10 INTB is routed to irq 19
>found-> vendor=0x8086, dev=0x8811, revid=0x01
>        domain=0, bus=2, slot=10, func=1
>        class=07-00-02, hdrtype=0x00, mfdev=1
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type I/O Port, range 32, base 0x1040, size  3, enabled
>pcib2: allocated I/O port range (0x1040-0x1047) for rid 10 of pci0:2:10:1
>        map[14]: type Memory, range 32, base 0xa0004d00, size  4, enabled
>pcib2: allocated memory range (0xa0004d00-0xa0004d0f) for rid 14 of pci0:2:10:1
>pcib0: slot 23 INTD routed to irq 19
>pcib1: slot 0 INTD is routed to irq 19
>pcib2: slot 10 INTB is routed to irq 19
>found-> vendor=0x8086, dev=0x8812, revid=0x00
>        domain=0, bus=2, slot=10, func=2
>        class=07-00-02, hdrtype=0x00, mfdev=1
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type I/O Port, range 32, base 0x1048, size  3, enabled
>pcib2: allocated I/O port range (0x1048-0x104f) for rid 10 of pci0:2:10:2
>        map[14]: type Memory, range 32, base 0xa0004d10, size  4, enabled
>pcib2: allocated memory range (0xa0004d10-0xa0004d1f) for rid 14 of pci0:2:10:2
>pcib0: slot 23 INTD routed to irq 19
>pcib1: slot 0 INTD is routed to irq 19
>pcib2: slot 10 INTB is routed to irq 19
>found-> vendor=0x8086, dev=0x8813, revid=0x00
>        domain=0, bus=2, slot=10, func=3
>        class=07-00-02, hdrtype=0x00, mfdev=1
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type I/O Port, range 32, base 0x1050, size  3, enabled
>pcib2: allocated I/O port range (0x1050-0x1057) for rid 10 of pci0:2:10:3
>        map[14]: type Memory, range 32, base 0xa0004d20, size  4, enabled
>pcib2: allocated memory range (0xa0004d20-0xa0004d2f) for rid 14 of pci0:2:10:3
>pcib0: slot 23 INTD routed to irq 19
>pcib1: slot 0 INTD is routed to irq 19
>pcib2: slot 10 INTB is routed to irq 19
>found-> vendor=0x8086, dev=0x8814, revid=0x00
>        domain=0, bus=2, slot=10, func=4
>        class=07-00-02, hdrtype=0x00, mfdev=1
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[10]: type I/O Port, range 32, base 0x1058, size  3, enabled
>pcib2: allocated I/O port range (0x1058-0x105f) for rid 10 of pci0:2:10:4
>        map[14]: type Memory, range 32, base 0xa0004d30, size  4, enabled
>pcib2: allocated memory range (0xa0004d30-0xa0004d3f) for rid 14 of pci0:2:10:4
>pcib0: slot 23 INTD routed to irq 19
>pcib1: slot 0 INTD is routed to irq 19
>pcib2: slot 10 INTB is routed to irq 19
>found-> vendor=0x8086, dev=0x8815, revid=0x00
>        domain=0, bus=2, slot=12, func=0
>        class=ff-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=5
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[14]: type Memory, range 32, base 0xa0004e00, size  8, enabled
>pcib2: allocated memory range (0xa0004e00-0xa0004eff) for rid 14 of pci0:2:12:0
>pcib0: slot 23 INTC routed to irq 18
>pcib1: slot 0 INTC is routed to irq 18
>pcib2: slot 12 INTC is routed to irq 18
>found-> vendor=0x8086, dev=0x8816, revid=0x00
>        domain=0, bus=2, slot=12, func=1
>        class=0c-80-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=5
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[14]: type Memory, range 32, base 0xa0004f00, size  5, enabled
>pcib2: allocated memory range (0xa0004f00-0xa0004f1f) for rid 14 of pci0:2:12:1
>pcib0: slot 23 INTC routed to irq 18
>pcib1: slot 0 INTC is routed to irq 18
>pcib2: slot 12 INTC is routed to irq 18
>found-> vendor=0x8086, dev=0x8817, revid=0x00
>        domain=0, bus=2, slot=12, func=2
>        class=0c-80-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=5
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[14]: type Memory, range 32, base 0xa0005000, size  8, enabled
>pcib2: allocated memory range (0xa0005000-0xa00050ff) for rid 14 of pci0:2:12:2
>pcib0: slot 23 INTC routed to irq 18
>pcib1: slot 0 INTC is routed to irq 18
>pcib2: slot 12 INTC is routed to irq 18
>found-> vendor=0x8086, dev=0x8818, revid=0x00
>        domain=0, bus=2, slot=12, func=3
>        class=0c-09-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=5
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[14]: type Memory, range 32, base 0xa0005200, size  9, enabled
>pcib2: allocated memory range (0xa0005200-0xa00053ff) for rid 14 of pci0:2:12:3
>pcib0: slot 23 INTC routed to irq 18
>pcib1: slot 0 INTC is routed to irq 18
>pcib2: slot 12 INTC is routed to irq 18
>found-> vendor=0x8086, dev=0x8819, revid=0x01
>        domain=0, bus=2, slot=12, func=4
>        class=ff-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=5
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message
>        map[14]: type Memory, range 32, base 0xa0005400, size  8, enabled
>pcib2: allocated memory range (0xa0005400-0xa00054ff) for rid 14 of pci0:2:12:4
>pcib0: slot 23 INTC routed to irq 18
>pcib1: slot 0 INTC is routed to irq 18
>pcib2: slot 12 INTC is routed to irq 18
>pci2: <unknown> at device 0.0 (no driver attached)
>pci2: <network, ethernet> at device 0.1 (no driver attached)
>pci2: <unknown> at device 0.2 (no driver attached)
>ohci0: <OHCI (generic) USB controller> mem 0xa0000b00-0xa0000bff irq 19 at device 2.0 on pci2
>ohci0: (New OHCI DeviceId=0x88048086)
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 48
>usbus0 on ohci0
>ohci0: usbpf: Attached
>ohci1: <OHCI (generic) USB controller> mem 0xa0000c00-0xa0000cff irq 19 at device 2.1 on pci2
>ohci1: (New OHCI DeviceId=0x88058086)
>usbus1 on ohci1
>ohci1: usbpf: Attached
>ohci2: <OHCI (generic) USB controller> mem 0xa0000d00-0xa0000dff irq 19 at device 2.2 on pci2
>ohci2: (New OHCI DeviceId=0x88068086)
>usbus2 on ohci2
>ohci2: usbpf: Attached
>ehci0: <EHCI (generic) USB 2.0 controller> mem 0xa0000e00-0xa0000eff irq 19 at device 2.3 on pci2
>usbus3: EHCI version 1.0
>usbus3 on ehci0
>ehci0: usbpf: Attached
>pci2: <serial bus, USB> at device 2.4 (no driver attached)
>sdhci_pci0: <Generic SD HCI> mem 0xa0004000-0xa00041ff irq 18 at device 4.0 on pci2
>sdhci_pci0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 256 to local APIC 0 vector 49
>sdhci_pci0: using IRQ 256 for MSI
>sdhci_pci0-slot0: 50MHz HS 8bits 3.3V DMA
>sdhci_pci0-slot0: ============== REGISTER DUMP ==============
>sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00000100
>sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_pci0-slot0: Present:  0x01f20000 | Host ctl: 0x00000000
>sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000000
>sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000000
>sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_pci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
>sdhci_pci0-slot0: AC12 err: 0x00000000 | Slot int: 0x000000ff
>sdhci_pci0-slot0: Caps:     0x01f632b2 | Max curr: 0x00000080
>sdhci_pci0-slot0: ===========================================
>sdhci_pci0: 1 slot(s) allocated
>sdhci_pci1: <Generic SD HCI> mem 0xa0004200-0xa00043ff irq 18 at device 4.1 on pci2
>sdhci_pci1: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 257 to local APIC 0 vector 50
>sdhci_pci1: using IRQ 257 for MSI
>sdhci_pci1-slot0: 50MHz HS 8bits 3.3V DMA
>sdhci_pci1-slot0: ============== REGISTER DUMP ==============
>sdhci_pci1-slot0: Sys addr: 0x00000000 | Version:  0x00000100
>sdhci_pci1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_pci1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_pci1-slot0: Present:  0x01f20000 | Host ctl: 0x00000000
>sdhci_pci1-slot0: Power:    0x00000000 | Blk gap:  0x00000000
>sdhci_pci1-slot0: Wake-up:  0x00000000 | Clock:    0x00000000
>sdhci_pci1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_pci1-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
>sdhci_pci1-slot0: AC12 err: 0x00000000 | Slot int: 0x000000ff
>sdhci_pci1-slot0: Caps:     0x01f632b2 | Max curr: 0x00000080
>sdhci_pci1-slot0: ===========================================
>sdhci_pci1: 1 slot(s) allocated
>ahci0: <AHCI SATA controller> port 0x1020-0x103f mem 0xa0004400-0xa00047ff irq 17 at device 6.0 on pci2
>ahci0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 258 to local APIC 0 vector 51
>ahci0: using IRQ 258 for MSI
>ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported
>ahci0: Caps: NCQ SNTF SS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC 2ports
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich0: Caps:
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich1: Caps:
>ohci3: <OHCI (generic) USB controller> mem 0xa0004800-0xa00048ff irq 16 at device 8.0 on pci2
>ohci3: (New OHCI DeviceId=0x880c8086)
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52
>usbus4 on ohci3
>ohci3: usbpf: Attached
>ohci4: <OHCI (generic) USB controller> mem 0xa0004900-0xa00049ff irq 16 at device 8.1 on pci2
>ohci4: (New OHCI DeviceId=0x880d8086)
>usbus5 on ohci4
>ohci4: usbpf: Attached
>ohci5: <OHCI (generic) USB controller> mem 0xa0004a00-0xa0004aff irq 16 at device 8.2 on pci2
>ohci5: (New OHCI DeviceId=0x880e8086)
>usbus6 on ohci5
>ohci5: usbpf: Attached
>ehci1: <EHCI (generic) USB 2.0 controller> mem 0xa0004b00-0xa0004bff irq 16 at device 8.3 on pci2
>usbus7: EHCI version 1.0
>usbus7 on ehci1
>ehci1: usbpf: Attached
>pci2: <unknown> at device 10.0 (no driver attached)
>uart2: <Intel EG20T Serial Port 0> port 0x1040-0x1047 mem 0xa0004d00-0xa0004d0f irq 19 at device 10.1 on pci2
>uart2: fast interrupt
>uart3: <Intel EG20T Serial Port 1> port 0x1048-0x104f mem 0xa0004d10-0xa0004d1f irq 19 at device 10.2 on pci2
>uart3: fast interrupt
>uart4: <Intel EG20T Serial Port 2> port 0x1050-0x1057 mem 0xa0004d20-0xa0004d2f irq 19 at device 10.3 on pci2
>uart4: fast interrupt
>uart5: <Intel EG20T Serial Port 3> port 0x1058-0x105f mem 0xa0004d30-0xa0004d3f irq 19 at device 10.4 on pci2
>uart5: fast interrupt
>pci2: <unknown> at device 12.0 (no driver attached)
>pci2: <serial bus> at device 12.1 (no driver attached)
>pci2: <serial bus> at device 12.2 (no driver attached)
>pci2: <serial bus> at device 12.3 (no driver attached)
>pci2: <unknown> at device 12.4 (no driver attached)
>pcib3: <PCI-PCI bridge> irq 17 at device 24.0 on pci0
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   7
>pcib3:   I/O decode        0x2000-0x3fff
>pcib3:   memory decode     0xa1000000-0xa2ffffff
>pci3: <PCI bus> on pcib3
>pcib3: allocated bus range (3-3) for rid 0 of pci3
>pci3: domain=0, physical bus=3
>found-> vendor=0x111d, dev=0x803a, revid=0x0e
>        domain=0, bus=3, slot=0, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        powerspec 3  supports D0 D3  current D0
>        secbus=4, subbus=7
>pcib3: allocated bus range (4-7) for rid 0 of pci0:3:0:0
>pcib4: <PCI-PCI bridge> at device 0.0 on pci3
>pcib3: allocated I/O port range (0x2000-0x3fff) for rid 1c of pcib4
>pcib3: allocated memory range (0xa1000000-0xa2ffffff) for rid 20 of pcib4
>pcib4:   domain            0
>pcib4:   secondary bus     4
>pcib4:   subordinate bus   7
>pcib4:   I/O decode        0x2000-0x3fff
>pcib4:   memory decode     0xa1000000-0xa2ffffff
>pci4: <PCI bus> on pcib4
>pcib4: allocated bus range (4-4) for rid 0 of pci4
>pci4: domain=0, physical bus=4
>found-> vendor=0x111d, dev=0x803a, revid=0x0e
>        domain=0, bus=4, slot=2, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        secbus=5, subbus=5
>pcib4: allocated bus range (5-5) for rid 0 of pci0:4:2:0
>found-> vendor=0x111d, dev=0x803a, revid=0x0e
>        domain=0, bus=4, slot=3, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        secbus=6, subbus=6
>pcib4: allocated bus range (6-6) for rid 0 of pci0:4:3:0
>found-> vendor=0x111d, dev=0x803a, revid=0x0e
>        domain=0, bus=4, slot=4, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        secbus=7, subbus=7
>pcib4: allocated bus range (7-7) for rid 0 of pci0:4:4:0
>pcib5: <PCI-PCI bridge> at device 2.0 on pci4
>pcib4: allocated I/O port range (0x2000-0x2fff) for rid 1c of pcib5
>pcib4: allocated memory range (0xa1000000-0xa1ffffff) for rid 20 of pcib5
>pcib5:   domain            0
>pcib5:   secondary bus     5
>pcib5:   subordinate bus   5
>pcib5:   I/O decode        0x2000-0x2fff
>pcib5:   memory decode     0xa1000000-0xa1ffffff
>pci5: <PCI bus> on pcib5
>pcib5: allocated bus range (5-5) for rid 0 of pci5
>pci5: domain=0, physical bus=5
>found-> vendor=0x8086, dev=0x10d3, revid=0x00
>        domain=0, bus=5, slot=0, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=9
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        MSI-X supports 5 messages in map 0x1c
>        map[10]: type Memory, range 32, base 0xa1000000, size 17, enabled
>pcib5: allocated memory range (0xa1000000-0xa101ffff) for rid 10 of pci0:5:0:0
>        map[18]: type I/O Port, range 32, base 0x2000, size  5, enabled
>pcib5: allocated I/O port range (0x2000-0x201f) for rid 18 of pci0:5:0:0
>        map[1c]: type Memory, range 32, base 0xa1020000, size 14, enabled
>pcib5: allocated memory range (0xa1020000-0xa1023fff) for rid 1c of pci0:5:0:0
>pcib0: slot 24 INTC routed to irq 19
>pcib3: slot 0 INTC is routed to irq 19
>pcib4: slot 2 INTA is routed to irq 19
>pcib5: slot 0 INTA is routed to irq 19
>em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x2000-0x201f mem 0xa1000000-0xa101ffff,0xa1020000-0xa1023fff irq 19 at device 0.0 on pci5
>em0: attempting to allocate 3 MSI-X vectors (5 supported)
>msi: routing MSI-X IRQ 259 to local APIC 0 vector 53
>msi: routing MSI-X IRQ 260 to local APIC 0 vector 54
>msi: routing MSI-X IRQ 261 to local APIC 0 vector 55
>em0: using IRQs 259-261 for MSI-X
>em0: Using MSIX interrupts with 3 vectors
>em0: bpf attached
>em0: Ethernet address: 00:00:24:d0:64:48
>pcib6: <PCI-PCI bridge> at device 3.0 on pci4
>pcib4: allocated I/O port range (0x3000-0x3fff) for rid 1c of pcib6
>pcib4: allocated memory range (0xa2000000-0xa2ffffff) for rid 20 of pcib6
>pcib6:   domain            0
>pcib6:   secondary bus     6
>pcib6:   subordinate bus   6
>pcib6:   I/O decode        0x3000-0x3fff
>pcib6:   memory decode     0xa2000000-0xa2ffffff
>pci6: <PCI bus> on pcib6
>pcib6: allocated bus range (6-6) for rid 0 of pci6
>pci6: domain=0, physical bus=6
>found-> vendor=0x8086, dev=0x10d3, revid=0x00
>        domain=0, bus=6, slot=0, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        MSI-X supports 5 messages in map 0x1c
>        map[10]: type Memory, range 32, base 0xa2000000, size 17, enabled
>pcib6: allocated memory range (0xa2000000-0xa201ffff) for rid 10 of pci0:6:0:0
>        map[18]: type I/O Port, range 32, base 0x3000, size  5, enabled
>pcib6: allocated I/O port range (0x3000-0x301f) for rid 18 of pci0:6:0:0
>        map[1c]: type Memory, range 32, base 0xa2020000, size 14, enabled
>pcib6: allocated memory range (0xa2020000-0xa2023fff) for rid 1c of pci0:6:0:0
>pcib0: slot 24 INTD routed to irq 16
>pcib3: slot 0 INTD is routed to irq 16
>pcib4: slot 3 INTA is routed to irq 16
>pcib6: slot 0 INTA is routed to irq 16
>em1: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x3000-0x301f mem 0xa2000000-0xa201ffff,0xa2020000-0xa2023fff irq 16 at device 0.0 on pci6
>em1: attempting to allocate 3 MSI-X vectors (5 supported)
>msi: routing MSI-X IRQ 262 to local APIC 0 vector 56
>msi: routing MSI-X IRQ 263 to local APIC 0 vector 57
>msi: routing MSI-X IRQ 264 to local APIC 0 vector 58
>em1: using IRQs 262-264 for MSI-X
>em1: Using MSIX interrupts with 3 vectors
>em1: bpf attached
>em1: Ethernet address: 00:00:24:d0:64:49
>pcib7: <PCI-PCI bridge> at device 4.0 on pci4
>pcib7:   domain            0
>pcib7:   secondary bus     7
>pcib7:   subordinate bus   7
>pci7: <PCI bus> on pcib7
>pcib7: allocated bus range (7-7) for rid 0 of pci7
>pci7: domain=0, physical bus=7
>pcib8: <PCI-PCI bridge> irq 18 at device 25.0 on pci0
>pcib8:   domain            0
>pcib8:   secondary bus     8
>pcib8:   subordinate bus   12
>pcib8:   I/O decode        0x4000-0x5fff
>pcib8:   memory decode     0xa3000000-0xa4ffffff
>pci8: <PCI bus> on pcib8
>pcib8: allocated bus range (8-8) for rid 0 of pci8
>pci8: domain=0, physical bus=8
>found-> vendor=0x111d, dev=0x803a, revid=0x0e
>        domain=0, bus=8, slot=0, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        powerspec 3  supports D0 D3  current D0
>        secbus=9, subbus=12
>pcib8: allocated bus range (9-12) for rid 0 of pci0:8:0:0
>pcib9: <PCI-PCI bridge> at device 0.0 on pci8
>pcib8: allocated I/O port range (0x4000-0x5fff) for rid 1c of pcib9
>pcib8: allocated memory range (0xa3000000-0xa4ffffff) for rid 20 of pcib9
>pcib9:   domain            0
>pcib9:   secondary bus     9
>pcib9:   subordinate bus   12
>pcib9:   I/O decode        0x4000-0x5fff
>pcib9:   memory decode     0xa3000000-0xa4ffffff
>pci9: <PCI bus> on pcib9
>pcib9: allocated bus range (9-9) for rid 0 of pci9
>pci9: domain=0, physical bus=9
>found-> vendor=0x111d, dev=0x803a, revid=0x0e
>        domain=0, bus=9, slot=2, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        secbus=10, subbus=10
>pcib9: allocated bus range (10-10) for rid 0 of pci0:9:2:0
>found-> vendor=0x111d, dev=0x803a, revid=0x0e
>        domain=0, bus=9, slot=3, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        secbus=11, subbus=11
>pcib9: allocated bus range (11-11) for rid 0 of pci0:9:3:0
>found-> vendor=0x111d, dev=0x803a, revid=0x0e
>        domain=0, bus=9, slot=4, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        secbus=12, subbus=12
>pcib9: allocated bus range (12-12) for rid 0 of pci0:9:4:0
>pcib10: <PCI-PCI bridge> at device 2.0 on pci9
>pcib9: allocated I/O port range (0x4000-0x4fff) for rid 1c of pcib10
>pcib9: allocated memory range (0xa3000000-0xa3ffffff) for rid 20 of pcib10
>pcib10:   domain            0
>pcib10:   secondary bus     10
>pcib10:   subordinate bus   10
>pcib10:   I/O decode        0x4000-0x4fff
>pcib10:   memory decode     0xa3000000-0xa3ffffff
>pci10: <PCI bus> on pcib10
>pcib10: allocated bus range (10-10) for rid 0 of pci10
>pci10: domain=0, physical bus=10
>found-> vendor=0x8086, dev=0x10d3, revid=0x00
>        domain=0, bus=10, slot=0, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        MSI-X supports 5 messages in map 0x1c
>        map[10]: type Memory, range 32, base 0xa3000000, size 17, enabled
>pcib10: allocated memory range (0xa3000000-0xa301ffff) for rid 10 of pci0:10:0:0
>        map[18]: type I/O Port, range 32, base 0x4000, size  5, enabled
>pcib10: allocated I/O port range (0x4000-0x401f) for rid 18 of pci0:10:0:0
>        map[1c]: type Memory, range 32, base 0xa3020000, size 14, enabled
>pcib10: allocated memory range (0xa3020000-0xa3023fff) for rid 1c of pci0:10:0:0
>pcib0: slot 25 INTC routed to irq 16
>pcib8: slot 0 INTC is routed to irq 16
>pcib9: slot 2 INTA is routed to irq 16
>pcib10: slot 0 INTA is routed to irq 16
>em2: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x4000-0x401f mem 0xa3000000-0xa301ffff,0xa3020000-0xa3023fff irq 16 at device 0.0 on pci10
>em2: attempting to allocate 3 MSI-X vectors (5 supported)
>msi: routing MSI-X IRQ 265 to local APIC 0 vector 59
>msi: routing MSI-X IRQ 266 to local APIC 0 vector 60
>msi: routing MSI-X IRQ 267 to local APIC 0 vector 61
>em2: using IRQs 265-267 for MSI-X
>em2: Using MSIX interrupts with 3 vectors
>em2: bpf attached
>em2: Ethernet address: 00:00:24:d0:64:4a
>pcib11: <PCI-PCI bridge> at device 3.0 on pci9
>pcib9: allocated I/O port range (0x5000-0x5fff) for rid 1c of pcib11
>pcib9: allocated memory range (0xa4000000-0xa4ffffff) for rid 20 of pcib11
>pcib11:   domain            0
>pcib11:   secondary bus     11
>pcib11:   subordinate bus   11
>pcib11:   I/O decode        0x5000-0x5fff
>pcib11:   memory decode     0xa4000000-0xa4ffffff
>pci11: <PCI bus> on pcib11
>pcib11: allocated bus range (11-11) for rid 0 of pci11
>pci11: domain=0, physical bus=11
>found-> vendor=0x8086, dev=0x10d3, revid=0x00
>        domain=0, bus=11, slot=0, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        powerspec 2  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>        MSI-X supports 5 messages in map 0x1c
>        map[10]: type Memory, range 32, base 0xa4000000, size 17, enabled
>pcib11: allocated memory range (0xa4000000-0xa401ffff) for rid 10 of pci0:11:0:0
>        map[18]: type I/O Port, range 32, base 0x5000, size  5, enabled
>pcib11: allocated I/O port range (0x5000-0x501f) for rid 18 of pci0:11:0:0
>        map[1c]: type Memory, range 32, base 0xa4020000, size 14, enabled
>pcib11: allocated memory range (0xa4020000-0xa4023fff) for rid 1c of pci0:11:0:0
>pcib0: slot 25 INTD routed to irq 17
>pcib8: slot 0 INTD is routed to irq 17
>pcib9: slot 3 INTA is routed to irq 17
>pcib11: slot 0 INTA is routed to irq 17
>em3: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x5000-0x501f mem 0xa4000000-0xa401ffff,0xa4020000-0xa4023fff irq 17 at device 0.0 on pci11
>em3: attempting to allocate 3 MSI-X vectors (5 supported)
>msi: routing MSI-X IRQ 268 to local APIC 0 vector 62
>msi: routing MSI-X IRQ 269 to local APIC 0 vector 63
>msi: routing MSI-X IRQ 270 to local APIC 0 vector 64
>em3: using IRQs 268-270 for MSI-X
>em3: Using MSIX interrupts with 3 vectors
>em3: bpf attached
>em3: Ethernet address: 00:00:24:d0:64:4b
>pcib12: <PCI-PCI bridge> at device 4.0 on pci9
>pcib12:   domain            0
>pcib12:   secondary bus     12
>pcib12:   subordinate bus   12
>pci12: <PCI bus> on pcib12
>pcib12: allocated bus range (12-12) for rid 0 of pci12
>pci12: domain=0, physical bus=12
>pcib13: <PCI-PCI bridge> irq 19 at device 26.0 on pci0
>pcib13:   domain            0
>pcib13:   secondary bus     13
>pcib13:   subordinate bus   13
>pcib13:   memory decode     0xa5000000-0xa5ffffff
>pci13: <PCI bus> on pcib13
>pcib13: allocated bus range (13-13) for rid 0 of pci13
>pci13: domain=0, physical bus=13
>found-> vendor=0x168c, dev=0x0030, revid=0x01
>        domain=0, bus=13, slot=0, func=0
>        class=02-80-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=9
>        powerspec 3  supports D0 D1 D3  current D0
>        MSI supports 4 messages, 64 bit, vector masks
>        map[10]: type Memory, range 64, base 0xa5000000, size 17, enabled
>pcib13: allocated memory range (0xa5000000-0xa501ffff) for rid 10 of pci0:13:0:0
>pcib0: slot 26 INTA routed to irq 19
>pcib13: slot 0 INTA is routed to irq 19
>ath0: <Atheros AR938x> mem 0xa5000000-0xa501ffff irq 19 at device 0.0 on pci13
>ar9300_set_stub_functions: setting stub functions
>ar9300_set_stub_functions: setting stub functions
>ar9300_attach: calling ar9300_hw_attach
>ar9300_hw_attach: calling ar9300_eeprom_attach
>ar9300_flash_map: unimplemented for now
>Restoring Cal data from DRAM
>Restoring Cal data from EEPROM
>ar9300_hw_attach: ar9300_eeprom_attach returned 0
>ath0: RX status length: 48
>ath0: RX buffer size: 4096
>ath0: TX descriptor length: 128
>ath0: TX status length: 36
>ath0: TX buffers per descriptor: 4
>ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
>ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
>ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
>ath0: [HT] enabling HT modes
>ath0: [HT] enabling short-GI in 20MHz mode
>ath0: [HT] 1 stream STBC receive enabled
>ath0: [HT] 1 stream STBC transmit enabled
>ath0: [HT] 3 RX streams; 3 TX streams
>ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: 3T3R
>ath0: 11na MCS 20MHz
>ath0: MCS 0-7: 6.5Mbps - 65Mbps
>ath0: MCS 8-15: 13Mbps - 130Mbps
>ath0: MCS 16-23: 19.5Mbps - 195Mbps
>ath0: 11na MCS 20MHz SGI
>ath0: MCS 0-7: 7Mbps - 72Mbps
>ath0: MCS 8-15: 14.5Mbps - 144.5Mbps
>ath0: MCS 16-23: 21.5Mbps - 216.5Mbps
>ath0: 11na MCS 40MHz:
>ath0: MCS 0-7: 13.5Mbps - 135Mbps
>ath0: MCS 8-15: 27Mbps - 270Mbps
>ath0: MCS 16-23: 40.5Mbps - 405Mbps
>ath0: 11na MCS 40MHz SGI:
>ath0: MCS 0-7: 15Mbps - 150Mbps
>ath0: MCS 8-15: 30Mbps - 300Mbps
>ath0: MCS 16-23: 45Mbps - 450Mbps
>ath0: 11ng MCS 20MHz
>ath0: MCS 0-7: 6.5Mbps - 65Mbps
>ath0: MCS 8-15: 13Mbps - 130Mbps
>ath0: MCS 16-23: 19.5Mbps - 195Mbps
>ath0: 11ng MCS 20MHz SGI
>ath0: MCS 0-7: 7Mbps - 72Mbps
>ath0: MCS 8-15: 14.5Mbps - 144.5Mbps
>ath0: MCS 16-23: 21.5Mbps - 216.5Mbps
>ath0: 11ng MCS 40MHz:
>ath0: MCS 0-7: 13.5Mbps - 135Mbps
>ath0: MCS 8-15: 27Mbps - 270Mbps
>ath0: MCS 16-23: 40.5Mbps - 405Mbps
>ath0: 11ng MCS 40MHz SGI:
>ath0: MCS 0-7: 15Mbps - 150Mbps
>ath0: MCS 8-15: 30Mbps - 300Mbps
>ath0: MCS 16-23: 45Mbps - 450Mbps
>ath0: AR9380 mac 448.3 RF5110 phy 3114.12
>ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
>ath0: Use hw queue 1 for WME_AC_BE traffic
>ath0: Use hw queue 0 for WME_AC_BK traffic
>ath0: Use hw queue 2 for WME_AC_VI traffic
>ath0: Use hw queue 3 for WME_AC_VO traffic
>ath0: Use hw queue 8 for CAB traffic
>ath0: Use hw queue 9 for beacons
>ath0: using multicast key search
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>cpu0 on motherboard
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 613101a0600101a
>device_attach: est0 attach returned 6
>cpu1 on motherboard
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 613101a0600101a
>device_attach: est1 attach returned 6
>ahc_isa_identify 0: ioport 0xc00 alloc failed
>ahc_isa_identify 1: ioport 0x1c00 alloc failed
>ahc_isa_identify 2: ioport 0x2c00 alloc failed
>ahc_isa_identify 3: ioport 0x3c00 alloc failed
>ahc_isa_identify 4: ioport 0x4c00 alloc failed
>ahc_isa_identify 5: ioport 0x5c00 alloc failed
>ahc_isa_identify 6: ioport 0x6c00 alloc failed
>ahc_isa_identify 7: ioport 0x7c00 alloc failed
>ahc_isa_identify 8: ioport 0x8c00 alloc failed
>ahc_isa_identify 9: ioport 0x9c00 alloc failed
>ahc_isa_identify 10: ioport 0xac00 alloc failed
>ahc_isa_identify 11: ioport 0xbc00 alloc failed
>ahc_isa_identify 12: ioport 0xcc00 alloc failed
>ahc_isa_identify 13: ioport 0xdc00 alloc failed
>ahc_isa_identify 14: ioport 0xec00 alloc failed
>pnp_identify: Trying Read_Port at 203
>pnp_identify: Trying Read_Port at 243
>pnp_identify: Trying Read_Port at 283
>pnp_identify: Trying Read_Port at 2c3
>pnp_identify: Trying Read_Port at 303
>pnp_identify: Trying Read_Port at 343
>pnp_identify: Trying Read_Port at 383
>pnp_identify: Trying Read_Port at 3c3
>PNP Identify complete
>ex_isa_identify()
>isa_probe_children: disabling PnP devices
>pmtimer0 on isa0
>sc: sc0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>sc0: no video adapter found.
>sc0 failed to probe on isa0
>vga0 failed to probe on isa0
>ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
>ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 65
>ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
>ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 66
>atkbdc0: AT keyboard controller not found
>atkbdc0 failed to probe at port 0x60,0x64 on isa0
>atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
>atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 67
>Event timer "RTC" frequency 32768 Hz quality 0
>attimer0: <AT timer> at port 0x40 on isa0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 68
>Event timer "i8254" frequency 1193182 Hz quality 100
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: parallel port not found.
>ppc0 failed to probe at irq 7 on isa0
>uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>uart0: console (19200,n,8,1)
>ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 69
>uart0: fast interrupt
>uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>wbwd0 failed to probe on isa0
>isa_probe_children: probing PnP devices
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 613101a0600101a
>device_attach: est0 attach returned 6
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 613101a0600101a
>device_attach: est1 attach returned 6
>Device configuration finished.
>procfs registered
>lapic: Divisor 2, Frequency 50001158 Hz
>Timecounters tick every 1.000 msec
>vlan: initialized, using hash tables with chaining
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
>IPsec: Initialized Security Association Processing.
>enc0: bpf attached
>lo0: bpf attached
>hpt27xx: no controller detected.
>hptrr: no controller detected.
>hptnr: no controller detected.
>random: unblocking device.
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 12Mbps Full Speed USB v1.0
>ugen0.1: <0x8086> at usbus0
>uhub0: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <0x8086> at usbus1
>uhub1: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>ugen2.1: <0x8086> at usbus2
>uhub2: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen3.1: <Intel> at usbus3
>uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>usbus4: 12Mbps Full Speed USB v1.0
>usbus5: 12Mbps Full Speed USB v1.0
>uhub0: 1 port with 1 removable, self powered
>ugen4.1: <0x8086> at usbus4
>uhub4: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>ugen5.1: <0x8086> at usbus5
>uhub5: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
>uhub1: 1 port with 1 removable, self powered
>uhub2: 1 port with 1 removable, self powered
>usbus6: 12Mbps Full Speed USB v1.0
>usbus7: 480Mbps High Speed USB v2.0
>ugen6.1: <0x8086> at usbus6
>uhub6: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
>ugen7.1: <Intel> at usbus7
>uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
>ahcich0: AHCI reset...
>ahcich0: uhub5: 1 port with 1 removable, self powered
>uhub4: 1 port with 1 removable, self powered
>SATA connect timeout time=10000us status=00000000
>ahcich0: AHCI reset: device not found
>ahcich1: AHCI reset...
>ahcich1: SATA connect time=100us status=00000123
>ahcich1: uhub6: 1 port with 1 removable, self powered
>AHCI reset: device found
>ahcich1: AHCI reset: device ready after 0ms
>ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
>ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
>uhub3: 3 ports with 3 removable, self powered
>uhub7: 3 ports with 3 removable, self powered
>ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
>ada0: <TS16GMSA300 20110811> ATA-7 SATA 2.x device
>GEOM: new disk ada0
>ada0: Serial Number 20130321A69560145965
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
>ada0: 15104MB (30932992 512 byte sectors: 16H 63S/T 16383C)
>ada0: Previously was known as ad6
>pass0 at ahcich1 bus 0 scbus1 target 0 lun 0
>pass0: <TS16GMSA300 20110811> ATA-7 SATA 2.x device
>pass0: Serial Number 20130321A69560145965
>pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
>Netvsc initializing... done!
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>msi: Assigning MSI-X IRQ 260 to local APIC 1 vector 48
>msi: Assigning MSI-X IRQ 263 to local APIC 1 vector 49

Actions: View

Attachments on bug 201642: 158899 | 158900 | 158901 | 158902