Attachment 161585 Details for Bug 186346 – Verbose boot output.

Verbose boot output.

dmesg.boot (text/plain), 48.17 KB, created by Chris Platts on 2015-10-01 08:48:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chris Platts

Created: 2015-10-01 08:48:55 UTC

Size: 48.17 KB

patch

obsolete

>Table 'FACP' at 0xdffa0290
>Table 'APIC' at 0xdffa0390
>APIC: Found table at 0xdffa0390
>APIC: Using the MADT enumerator.
>MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
>SMP: Added CPU 1 (AP)
>MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
>MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
>Copyright (c) 1992-2015 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>   The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 10.2-RELEASE-p3 #1 r270797M: Sat Sep 26 23:06:06 BST 2015
>   root@trillian.home:/usr/obj/usr/src/sys/TRILLIAN amd64
>FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81acd000.
>Preloaded elf obj module "/boot/kernel/pf.ko" at 0xffffffff81acdcf8.
>Preloaded elf obj module "/boot/kernel/amdtemp.ko" at 0xffffffff81ace3a0.
>Preloaded elf obj module "/boot/modules/vboxdrv.ko" at 0xffffffff81ace948.
>Calibrating TSC clock ... TSC clock: 1498193376 Hz
>CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1498.19-MHz K8-class CPU)
> Origin="AuthenticAMD"  Id=0x100f63  Family=0x10  Model=0x6  Stepping=3
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> Features2=0x802009<SSE3,MON,CX16,POPCNT>
> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
> AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
> SVM: Features=0xf<NP,LbrVirt,SVML,NRIPS>
>Revision=1, ASIDs=64
> TSC: P-state invariant
>L1 2MB data TLB: 48 entries, fully associative
>L1 2MB instruction TLB: 16 entries, fully associative
>L1 4KB data TLB: 48 entries, fully associative
>L1 4KB instruction TLB: 32 entries, fully associative
>L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L2 2MB data TLB: 128 entries, 2-way associative
>L2 2MB instruction TLB: 0 entries, 2-way associative
>L2 4KB data TLB: 512 entries, 4-way associative
>L2 4KB instruction TLB: 512 entries, 4-way associative
>L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
>real memory  = 6442450944 (6144 MB)
>Physical memory chunk(s):
>0x0000000000010000 - 0x0000000000098fff, 561152 bytes (137 pages)
>0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
>0x0000000001af4000 - 0x00000000d55e8fff, 3551481856 bytes (867061 pages)
>0x00000000dff9e000 - 0x00000000dff9ffff, 8192 bytes (2 pages)
>0x0000000100000000 - 0x000000019ffe7fff, 2684256256 bytes (655336 pages)
>avail memory = 6195494912 (5908 MB)
>Event timer "LAPIC" quality 400
>ACPI APIC Table: <HP     ProLiant>
>INTR: Adding local APIC 1 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 2 core(s)
>cpu0 (BSP): APIC ID:  0
>cpu1 (AP): APIC ID:  1
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 2
>x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
>x86bios: SSEG 0x098000-0x098fff at 0xfffffe01a6858000
>x86bios: EBDA 0x09e000-0x09ffff at 0xfffff8000009e000
>x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
>XEN: CPU 0 has VCPU ID 1
>XEN: CPU 1 has VCPU ID 2
>ULE: setup cpu 0
>ULE: setup cpu 1
>ACPI: RSDP 0x00000000000F8F50 000024 (v02 HP    )
>ACPI: XSDT 0x00000000DFFA0100 00007C (v01 HP     ProLiant 20110729 HP   00000097)
>ACPI: FACP 0x00000000DFFA0290 0000F4 (v03 HP     ProLiant 20110729 HP   00000097)
>ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150515/tbfadt-644)
>ACPI: DSDT 0x00000000DFFA0620 006947 (v01 HP     ProLiant 00000006 INTL 20051117)
>ACPI: FACS 0x00000000DFFAE000 000040
>ACPI: APIC 0x00000000DFFA0390 000072 (v01 HP     ProLiant 20110729 HP   00000097)
>ACPI: MCFG 0x00000000DFFA0410 00003C (v01 HP     ProLiant 20110729 HP   00000097)
>ACPI: SPMI 0x00000000DFFA0450 000041 (v05 HP     ProLiant 20110729 HP   00000097)
>ACPI: OEMB 0x00000000DFFAE040 000072 (v01 HP     ProLiant 20110729 HP   00000097)
>ACPI: HPET 0x00000000DFFAB4E0 000038 (v01 HP     ProLiant 20110729 HP   00000097)
>ACPI: EINJ 0x00000000DFFAB520 000130 (v01 AMIER  AMI_EINJ 20110729 HP   00000097)
>ACPI: BERT 0x00000000DFFAB6B0 000030 (v01 AMIER  AMI_BERT 20110729 HP   00000097)
>ACPI: ERST 0x00000000DFFAB6E0 0001B0 (v01 AMIER  AMI_ERST 20110729 HP   00000097)
>ACPI: HEST 0x00000000DFFAB890 0000A8 (v01 AMIER  ABC_HEST 20110729 HP   00000097)
>ACPI: SSDT 0x00000000DFFAB940 000458 (v01 HP     ProLiant 00000001 AMD  00000001)
>MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>ioapic0: intpin 9 polarity: low
>lapic: Routing NMI -> LINT1
>lapic: LINT1 trigger: edge
>lapic: LINT1 polarity: high
>ioapic0 <Version 2.1> irqs 0-23 on motherboard
>cpu0 BSP:
>    ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>wlan: <802.11 Link Layer>
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>Hardware, Intel Secure Key RNG: RDRAND is not present
>Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
>null: <null device, zero device>
>Falling back to <Software, Yarrow> random adaptor
>random: <Software, Yarrow> initialized
>nfslock: pseudo-device
>crypto: <crypto core>
>module_register_init: MOD_LOAD (vesa, 0xffffffff80dfd320, 0) error 19
>io: <I/O>
>VMBUS: load
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>hptnr: R750/DC7280 controller driver v1.1.4
>hpt27xx: RocketRAID 27xx controller driver v1.2.7
>hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>cryptosoft0: <software crypto> on motherboard
>crypto: assign cryptosoft0 driver id 0, flags 100663296
>crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
>acpi0: <HP ProLiant> on motherboard
>ACPI: All ACPI Tables successfully acquired
>PCIe: Memory Mapped configuration base @ 0xe0000000
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>ACPI: Executed 2 blocks of module-level executable AML code
>ACPI: Dynamic OEM Table Load:
>ACPI: OEMN 0xFFFFF80002F76800 000624 (v01 AMD    NAHP     00000001 INTL 20051117)
>acpi0: Power Button (fixed)
>acpi0: reservation of fee00000, 1000 (3) failed
>acpi0: reservation of ffb80000, 80000 (3) failed
>acpi0: reservation of fec10000, 20 (3) failed
>acpi0: reservation of fed80000, 1000 (3) failed
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, dff00000 (3) failed
>cpu0: Processor \134_PR_.P001 (ACPI ID 1) -> APIC ID 0
>cpu0: <ACPI CPU> on acpi0
>cpu0: switching to generic Cx mode
>cpu1: Processor \134_PR_.P002 (ACPI ID 2) -> APIC ID 1
>cpu1: <ACPI CPU> on acpi0
>ACPI: Processor \134_PR_.P003 (ACPI ID 3) ignored
>ACPI: Processor \134_PR_.P004 (ACPI ID 4) ignored
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>hpet0: vendor 0x4353, rev 0x10, 14318180Hz, 3 timers, legacy route
>hpet0:  t0: irqs 0x00c00000 (0), MSI, periodic
>hpet0:  t1: irqs 0x00c00000 (0), MSI, periodic
>hpet0:  t2: irqs 0x00c00000 (0), MSI, periodic
>Timecounter "HPET" frequency 14318180 Hz quality 950
>msi: routing MSI-X IRQ 256 to local APIC 0 vector 51
>msi: routing MSI-X IRQ 257 to local APIC 0 vector 52
>msi: routing MSI-X IRQ 258 to local APIC 0 vector 53
>Event timer "HPET" frequency 14318180 Hz quality 550
>Event timer "HPET1" frequency 14318180 Hz quality 450
>ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
> Initial Probe       0  255   N     0  4 7 10 11 14 15
> Validation          0  255   N     0  4 7 10 11 14 15
> After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
> Initial Probe       0  255   N     0  4 7 10 11 14 15
> Validation          0  255   N     0  4 7 10 11 14 15
> After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
> Initial Probe       0  255   N     0  4 7 10 11 14 15
> Validation          0  255   N     0  4 7 10 11 14 15
> After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
> Initial Probe       0  255   N     0  4 7 10 11 14 15
> Validation          0  255   N     0  4 7 10 11 14 15
> After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
> Initial Probe       0  255   N     0  4 7 10 11 14 15
> Validation          0  255   N     0  4 7 10 11 14 15
> After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
> Initial Probe       0  255   N     0  4 7 10 11 14 15
> Validation          0  255   N     0  4 7 10 11 14 15
> After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
> Initial Probe       0  255   N     0  4 7 10 11 14 15
> Validation          0  255   N     0  4 7 10 11 14 15
> After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
> Initial Probe       0  255   N     0  4 7 10 11 14 15
> Validation          0  255   N     0  4 7 10 11 14 15
> After Disable       0  255   N     0  4 7 10 11 14 15
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 5 range 0-0xff
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0xd0000-0xdffff
>pcib0: decoding 3 range 0xf0000000-0xfebfffff
>pcib0: decoding 3 range 0xf0000000-0xffffffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->    vendor=0x1022, dev=0x9601, revid=0x00
>   domain=0, bus=0, slot=0, func=0
>   class=06-00-00, hdrtype=0x00, mfdev=0
>   cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->    vendor=0x1022, dev=0x9603, revid=0x00
>   domain=0, bus=0, slot=2, func=0
>   class=06-04-00, hdrtype=0x01, mfdev=0
>   cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=10
>   powerspec 3  supports D0 D3  current D0
>   MSI supports 1 message
>pcib0: matched entry for 0.2.INTA
>pcib0: slot 2 INTA hardwired to IRQ 18
>   secbus=1, subbus=1
>found->    vendor=0x1022, dev=0x9604, revid=0x00
>   domain=0, bus=0, slot=4, func=0
>   class=06-04-00, hdrtype=0x01, mfdev=0
>   cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=11
>   powerspec 3  supports D0 D3  current D0
>   MSI supports 1 message
>pcib0: matched entry for 0.4.INTA
>pcib0: slot 4 INTA hardwired to IRQ 16
>   secbus=2, subbus=3
>found->    vendor=0x1022, dev=0x9606, revid=0x00
>   domain=0, bus=0, slot=6, func=0
>   class=06-04-00, hdrtype=0x01, mfdev=0
>   cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=10
>   powerspec 3  supports D0 D3  current D0
>   MSI supports 1 message
>pcib0: matched entry for 0.6.INTA
>pcib0: slot 6 INTA hardwired to IRQ 18
>   secbus=4, subbus=4
>found->    vendor=0x1002, dev=0x4391, revid=0x40
>   domain=0, bus=0, slot=17, func=0
>   class=01-06-01, hdrtype=0x00, mfdev=0
>   cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
>   lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=7
>   MSI supports 8 messages, 64 bit
>   map[10]: type I/O Port, range 32, base 0xb000, size  3, enabled
>pcib0: allocated type 4 (0xb000-0xb007) for rid 10 of pci0:0:17:0
>   map[14]: type I/O Port, range 32, base 0xa000, size  2, enabled
>pcib0: allocated type 4 (0xa000-0xa003) for rid 14 of pci0:0:17:0
>   map[18]: type I/O Port, range 32, base 0x9000, size  3, enabled
>pcib0: allocated type 4 (0x9000-0x9007) for rid 18 of pci0:0:17:0
>   map[1c]: type I/O Port, range 32, base 0x8000, size  2, enabled
>pcib0: allocated type 4 (0x8000-0x8003) for rid 1c of pci0:0:17:0
>   map[20]: type I/O Port, range 32, base 0x7000, size  4, enabled
>pcib0: allocated type 4 (0x7000-0x700f) for rid 20 of pci0:0:17:0
>   map[24]: type Memory, range 32, base 0xfdeffc00, size 10, enabled
>pcib0: allocated type 3 (0xfdeffc00-0xfdefffff) for rid 24 of pci0:0:17:0
>pcib0: matched entry for 0.17.INTA
>pcib0: slot 17 INTA hardwired to IRQ 19
>found->    vendor=0x1002, dev=0x4397, revid=0x00
>   domain=0, bus=0, slot=18, func=0
>   class=0c-03-10, hdrtype=0x00, mfdev=1
>   cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>   lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=10
>   map[10]: type Memory, range 32, base 0xfdefe000, size 12, enabled
>pcib0: allocated type 3 (0xfdefe000-0xfdefefff) for rid 10 of pci0:0:18:0
>pcib0: matched entry for 0.18.INTA
>pcib0: slot 18 INTA hardwired to IRQ 18
>ohci early: SMM active, request owner change
>found->    vendor=0x1002, dev=0x4396, revid=0x00
>   domain=0, bus=0, slot=18, func=2
>   class=0c-03-20, hdrtype=0x00, mfdev=0
>   cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
>   lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=b, irq=4
>   powerspec 2  supports D0 D1 D2 D3  current D0
>   map[10]: type Memory, range 32, base 0xfdeff800, size  8, enabled
>pcib0: allocated type 3 (0xfdeff800-0xfdeff8ff) for rid 10 of pci0:0:18:2
>pcib0: matched entry for 0.18.INTB
>pcib0: slot 18 INTB hardwired to IRQ 17
>found->    vendor=0x1002, dev=0x4397, revid=0x00
>   domain=0, bus=0, slot=19, func=0
>   class=0c-03-10, hdrtype=0x00, mfdev=1
>   cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>   lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=10
>   map[10]: type Memory, range 32, base 0xfdefd000, size 12, enabled
>pcib0: allocated type 3 (0xfdefd000-0xfdefdfff) for rid 10 of pci0:0:19:0
>pcib0: matched entry for 0.19.INTA
>pcib0: slot 19 INTA hardwired to IRQ 18
>ohci early: SMM active, request owner change
>found->    vendor=0x1002, dev=0x4396, revid=0x00
>   domain=0, bus=0, slot=19, func=2
>   class=0c-03-20, hdrtype=0x00, mfdev=0
>   cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
>   lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=b, irq=4
>   powerspec 2  supports D0 D1 D2 D3  current D0
>   map[10]: type Memory, range 32, base 0xfdeff400, size  8, enabled
>pcib0: allocated type 3 (0xfdeff400-0xfdeff4ff) for rid 10 of pci0:0:19:2
>pcib0: matched entry for 0.19.INTB
>pcib0: slot 19 INTB hardwired to IRQ 17
>found->    vendor=0x1002, dev=0x4385, revid=0x42
>   domain=0, bus=0, slot=20, func=0
>   class=0c-05-00, hdrtype=0x00, mfdev=1
>   cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->    vendor=0x1002, dev=0x439d, revid=0x40
>   domain=0, bus=0, slot=20, func=3
>   class=06-01-00, hdrtype=0x00, mfdev=1
>   cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->    vendor=0x1002, dev=0x4384, revid=0x40
>   domain=0, bus=0, slot=20, func=4
>   class=06-04-01, hdrtype=0x01, mfdev=1
>   cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords)
>   lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   secbus=5, subbus=5
>found->    vendor=0x1002, dev=0x4397, revid=0x00
>   domain=0, bus=0, slot=22, func=0
>   class=0c-03-10, hdrtype=0x00, mfdev=1
>   cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
>   lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=10
>   map[10]: type Memory, range 32, base 0xfdefc000, size 12, enabled
>pcib0: allocated type 3 (0xfdefc000-0xfdefcfff) for rid 10 of pci0:0:22:0
>pcib0: matched entry for 0.22.INTA
>pcib0: slot 22 INTA hardwired to IRQ 18
>ohci early: SMM active, request owner change
>found->    vendor=0x1002, dev=0x4396, revid=0x00
>   domain=0, bus=0, slot=22, func=2
>   class=0c-03-20, hdrtype=0x00, mfdev=0
>   cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
>   lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=b, irq=4
>   powerspec 2  supports D0 D1 D2 D3  current D0
>   map[10]: type Memory, range 32, base 0xfdeff000, size  8, enabled
>pcib0: allocated type 3 (0xfdeff000-0xfdeff0ff) for rid 10 of pci0:0:22:2
>pcib0: matched entry for 0.22.INTB
>pcib0: slot 22 INTB hardwired to IRQ 17
>found->    vendor=0x1022, dev=0x1200, revid=0x00
>   domain=0, bus=0, slot=24, func=0
>   class=06-00-00, hdrtype=0x00, mfdev=1
>   cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->    vendor=0x1022, dev=0x1201, revid=0x00
>   domain=0, bus=0, slot=24, func=1
>   class=06-00-00, hdrtype=0x00, mfdev=1
>   cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->    vendor=0x1022, dev=0x1202, revid=0x00
>   domain=0, bus=0, slot=24, func=2
>   class=06-00-00, hdrtype=0x00, mfdev=1
>   cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->    vendor=0x1022, dev=0x1203, revid=0x00
>   domain=0, bus=0, slot=24, func=3
>   class=06-00-00, hdrtype=0x00, mfdev=1
>   cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->    vendor=0x1022, dev=0x1204, revid=0x00
>   domain=0, bus=0, slot=24, func=4
>   class=06-00-00, hdrtype=0x00, mfdev=1
>   cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
>pcib1: allocating non-ISA range 0xc000-0xc0ff
>pcib0: allocated type 4 (0xc000-0xc0ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xc400-0xc4ff
>pcib0: allocated type 4 (0xc400-0xc4ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xc800-0xc8ff
>pcib0: allocated type 4 (0xc800-0xc8ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xcc00-0xccff
>pcib0: allocated type 4 (0xcc00-0xccff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xd000-0xd0ff
>pcib0: allocated type 4 (0xd000-0xd0ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xd400-0xd4ff
>pcib0: allocated type 4 (0xd400-0xd4ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xd800-0xd8ff
>pcib0: allocated type 4 (0xd800-0xd8ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xdc00-0xdcff
>pcib0: allocated type 4 (0xdc00-0xdcff) for rid 1c of pcib1
>pcib0: allocated type 3 (0xfdf00000-0xfdffffff) for rid 20 of pcib1
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0xc000-0xdfff
>pcib1:   memory decode     0xfdf00000-0xfdffffff
>pcib1:   special decode    ISA
>pci1: <ACPI PCI bus> on pcib1
>pcib1: allocated bus range (1-1) for rid 0 of pci1
>pci1: domain=0, physical bus=1
>found->    vendor=0x1b21, dev=0x0612, revid=0x01
>   domain=0, bus=1, slot=0, func=0
>   class=01-06-01, hdrtype=0x00, mfdev=0
>   cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=10
>   powerspec 3  supports D0 D3  current D0
>   MSI supports 1 message
>   map[10]: type I/O Port, range 32, base 0xd800, size  3, enabled
>pcib1: allocated I/O port range (0xd800-0xd807) for rid 10 of pci0:1:0:0
>   map[14]: type I/O Port, range 32, base 0xd400, size  2, enabled
>pcib1: allocated I/O port range (0xd400-0xd403) for rid 14 of pci0:1:0:0
>   map[18]: type I/O Port, range 32, base 0xd000, size  3, enabled
>pcib1: allocated I/O port range (0xd000-0xd007) for rid 18 of pci0:1:0:0
>   map[1c]: type I/O Port, range 32, base 0xc800, size  2, enabled
>pcib1: allocated I/O port range (0xc800-0xc803) for rid 1c of pci0:1:0:0
>   map[20]: type I/O Port, range 32, base 0xc400, size  5, enabled
>pcib1: allocated I/O port range (0xc400-0xc41f) for rid 20 of pci0:1:0:0
>   map[24]: type Memory, range 32, base 0xfdfffc00, size  9, enabled
>pcib1: allocated memory range (0xfdfffc00-0xfdfffdff) for rid 24 of pci0:1:0:0
>pcib1: matched entry for 1.0.INTA
>pcib1: slot 0 INTA hardwired to IRQ 18
>ahci0: <ASMedia ASM1061 AHCI SATA controller> port 0xd800-0xd807,0xd400-0xd403,0xd000-0xd007,0xc800-0xc803,0xc400-0xc41f mem 0xfdfffc00-0xfdfffdff irq 18 at device 0.0 on pci1
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54
>ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
>ahci0: Caps: 64bit NCQ SNTF SS AL CLO 6Gbps PM PMD SSC PSC 32cmd CCC eSATA 2ports
>ahci0: Caps2:
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich0: Caps: HPCP
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich1: Caps: HPCP
>pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
>pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib2
>pcib0: allocated type 3 (0xfe000000-0xfe8fffff) for rid 20 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   3
>pcib2:   I/O decode        0xe000-0xefff
>pcib2:   memory decode     0xfe000000-0xfe8fffff
>pcib2:   special decode    VGA
>pci2: <ACPI PCI bus> on pcib2
>pcib2: allocated bus range (2-2) for rid 0 of pci2
>pci2: domain=0, physical bus=2
>found->    vendor=0x1a03, dev=0x1150, revid=0x02
>   domain=0, bus=2, slot=0, func=0
>   class=06-04-00, hdrtype=0x01, mfdev=0
>   cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=11
>   powerspec 3  supports D0 D1 D2 D3  current D0
>   MSI supports 1 message, 64 bit
>pcib2: matched entry for 2.0.INTA
>pcib2: slot 0 INTA hardwired to IRQ 16
>   secbus=3, subbus=3
>pcib2: allocated bus range (3-3) for rid 0 of pci0:2:0:0
>pcib3: <PCI-PCI bridge> irq 16 at device 0.0 on pci2
>pcib2: allocated I/O port range (0xe000-0xefff) for rid 1c of pcib3
>pcib2: allocated memory range (0xfe000000-0xfe8fffff) for rid 20 of pcib3
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   I/O decode        0xe000-0xefff
>pcib3:   memory decode     0xfe000000-0xfe8fffff
>pcib3:   special decode    VGA
>pci3: <PCI bus> on pcib3
>pcib3: allocated bus range (3-3) for rid 0 of pci3
>pci3: domain=0, physical bus=3
>found->    vendor=0x1a03, dev=0x2000, revid=0x10
>   domain=0, bus=3, slot=0, func=0
>   class=03-00-00, hdrtype=0x00, mfdev=0
>   cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=11
>   powerspec 3  supports D0 D1 D2 D3  current D0
>   map[10]: type Memory, range 32, base 0xfe000000, size 23, enabled
>pcib3: allocated memory range (0xfe000000-0xfe7fffff) for rid 10 of pci0:3:0:0
>   map[14]: type Memory, range 32, base 0xfe8e0000, size 17, enabled
>pcib3: allocated memory range (0xfe8e0000-0xfe8fffff) for rid 14 of pci0:3:0:0
>   map[18]: type I/O Port, range 32, base 0xe800, size  7, enabled
>pcib3: allocated I/O port range (0xe800-0xe87f) for rid 18 of pci0:3:0:0
>pcib2: matched entry for 2.0.INTA
>pcib2: slot 0 INTA hardwired to IRQ 16
>pcib3: slot 0 INTA is routed to irq 16
>vgapci0: <VGA-compatible display> port 0xe800-0xe87f mem 0xfe000000-0xfe7fffff,0xfe8e0000-0xfe8fffff irq 16 at device 0.0 on pci3
>vgapci0: Boot video device
>pcib4: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
>pcib0: allocated type 3 (0xfe900000-0xfe9fffff) for rid 20 of pcib4
>pcib4:   domain            0
>pcib4:   secondary bus     4
>pcib4:   subordinate bus   4
>pcib4:   memory decode     0xfe900000-0xfe9fffff
>pcib4:   special decode    ISA
>pci4: <ACPI PCI bus> on pcib4
>pcib4: allocated bus range (4-4) for rid 0 of pci4
>pci4: domain=0, physical bus=4
>found->    vendor=0x14e4, dev=0x165b, revid=0x10
>   domain=0, bus=4, slot=0, func=0
>   class=02-00-00, hdrtype=0x00, mfdev=0
>   cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
>   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>   intpin=a, irq=10
>   powerspec 3  supports D0 D3  current D0
>   MSI supports 1 message, 64 bit
>   map[10]: type Memory, range 64, base 0xfe9f0000, size 16, enabled
>pcib4: allocated memory range (0xfe9f0000-0xfe9fffff) for rid 10 of pci0:4:0:0
>pcib4: matched entry for 4.0.INTA
>pcib4: slot 0 INTA hardwired to IRQ 18
>bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci4
>bge0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 259 to local APIC 0 vector 55
>bge0: using IRQ 259 for MSI
>bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
>bge0: Disabling fastboot
>miibus0: <MII bus> on bge0
>brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
>brgphy0: OUI 0x000af7, model 0x003a, rev. 4
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>bge0: Using defaults for TSO: 65518/35/2048
>bge0: bpf attached
>bge0: Ethernet address: a0:b3:cc:e3:f7:0e
>ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfdeffc00-0xfdefffff irq 19 at device 17.0 on pci0
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 56
>ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
>ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI>
>ahci1: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 6ports
>ahci1: Caps2:
>ahcich2: <AHCI channel> at channel 0 on ahci1
>ahcich2: Caps:
>ahcich3: <AHCI channel> at channel 1 on ahci1
>ahcich3: Caps:
>ahcich4: <AHCI channel> at channel 2 on ahci1
>ahcich4: Caps:
>ahcich5: <AHCI channel> at channel 3 on ahci1
>ahcich5: Caps:
>ahcich6: <AHCI channel> at channel 4 on ahci1
>ahcich6: Caps:
>ahcich7: <AHCI channel> at channel 5 on ahci1
>ahcich7: Caps:
>ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdefe000-0xfdefefff irq 18 at device 18.0 on pci0
>usbus0 on ohci0
>ohci0: usbpf: Attached
>ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfdeff800-0xfdeff8ff irq 17 at device 18.2 on pci0
>ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 57
>ehci0: Dropped interrupts workaround enabled
>usbus1: EHCI version 1.0
>usbus1 on ehci0
>ehci0: usbpf: Attached
>ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdefd000-0xfdefdfff irq 18 at device 19.0 on pci0
>usbus2 on ohci1
>ohci1: usbpf: Attached
>ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfdeff400-0xfdeff4ff irq 17 at device 19.2 on pci0
>ehci1: Dropped interrupts workaround enabled
>usbus3: EHCI version 1.0
>usbus3 on ehci1
>ehci1: usbpf: Attached
>pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 20.3 on pci0
>isa0: <ISA bus> on isab0
>pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>pcib5:   domain            0
>pcib5:   secondary bus     5
>pcib5:   subordinate bus   5
>pcib5:   special decode    ISA, subtractive
>pcib5: could not get PCI interrupt routing table for \134_SB_.PCI0.P0PC - AE_NOT_FOUND
>pci5: <ACPI PCI bus> on pcib5
>pcib5: allocated bus range (5-5) for rid 0 of pci5
>pci5: domain=0, physical bus=5
>ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfdefc000-0xfdefcfff irq 18 at device 22.0 on pci0
>usbus4 on ohci2
>ohci2: usbpf: Attached
>ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfdeff000-0xfdeff0ff irq 17 at device 22.2 on pci0
>ehci2: Dropped interrupts workaround enabled
>usbus5: EHCI version 1.0
>usbus5 on ehci2
>ehci2: usbpf: Attached
>amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
>amdtemp0: Found 2 cores and 1 sensors.
>acpi_button0: <Power Button> on acpi0
>ACPI: Enabled 4 GPEs in block 00 to 1F
>acpi0: wakeup code va 0xfffffe01aeed7000 pa 0x90000
>ex_isa_identify()
>pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
>pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
>pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
>pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
>pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
>pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
>pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
>ahc_isa_identify 0: ioport 0xc00 alloc failed
>ahc_isa_identify 1: ioport 0x1c00 alloc failed
>ahc_isa_identify 2: ioport 0x2c00 alloc failed
>ahc_isa_identify 3: ioport 0x3c00 alloc failed
>ahc_isa_identify 4: ioport 0x4c00 alloc failed
>ahc_isa_identify 5: ioport 0x5c00 alloc failed
>ahc_isa_identify 6: ioport 0x6c00 alloc failed
>ahc_isa_identify 7: ioport 0x7c00 alloc failed
>ahc_isa_identify 8: ioport 0x8c00 alloc failed
>ahc_isa_identify 9: ioport 0x9c00 alloc failed
>ahc_isa_identify 10: ioport 0xac00 alloc failed
>ahc_isa_identify 11: ioport 0xbc00 alloc failed
>ahc_isa_identify 12: ioport 0xcc00 alloc failed
>ahc_isa_identify 13: ioport 0xdc00 alloc failed
>ahc_isa_identify 14: ioport 0xec00 alloc failed
>isa_probe_children: disabling PnP devices
>atrtc: atrtc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>sc: sc0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: CGA <16 virtual consoles, flags=0x300>
>sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
>vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
>pcib0: allocated type 4 (0x3d0-0x3db) for rid 0 of vga0
>pcib0: allocated type 3 (0xb8000-0xbffff) for rid 0 of vga0
>pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
>pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
>atkbdc0: AT keyboard controller not found
>atkbdc0 failed to probe at port 0x60,0x64 on isa0
>pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
>pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: cannot reserve I/O port range
>ppc0 failed to probe at irq 7 on isa0
>pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
>uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
>pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
>uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>wbwd0 failed to probe on isa0
>isa_probe_children: probing PnP devices
>hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>Device configuration finished.
>random: unblocking device.
>usbus0: 12Mbps Full Speed USB v1.0
>procfs registered
>Timecounters tick every 1.000 msec
>vlan: initialized, using hash tables with chaining
>vboxdrv: fAsync=0 offMin=0x13a offMax=0x2cd
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
>IPsec: Initialized Security Association Processing.
>ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to deny, logging disabled
>enc0: bpf attached
>lo0: bpf attached
>hptnr: no controller detected.
>hpt27xx: no controller detected.
>hptrr: no controller detected.
>usbus1: 480Mbps High Speed USB v2.0
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>usbus4: 12Mbps Full Speed USB v1.0
>usbus5: 480Mbps High Speed USB v2.0
>ahcich0: AHCI reset...
>ahcich0: SATA connect time=1000us status=00000123
>ahcich0: AHCI reset: device found
>ahcich1: AHCI reset...
>ugen0.1: <ATI> at usbus0
>uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <ATI> at usbus1
>uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>ugen3.1: <ATI> at usbus3
>uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>ugen2.1: <ATI> at usbus2
>uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen5.1: <ATI> at usbus5
>uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
>ugen4.1: <ATI> at usbus4
>uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>ahcich1: SATA connect time=1000us status=00000123
>ahcich1: AHCI reset: device found
>ahcich2: AHCI reset...
>ahcich2: SATA connect time=100us status=00000123
>ahcich2: AHCI reset: device found
>ahcich3: AHCI reset...
>ahcich3: SATA connect time=100us status=00000123
>ahcich3: AHCI reset: device found
>ahcich4: AHCI reset...
>ahcich4: SATA connect time=100us status=00000123
>ahcich4: AHCI reset: device found
>ahcich5: AHCI reset...
>ahcich5: SATA connect time=100us status=00000123
>ahcich5: AHCI reset: device found
>ahcich6: AHCI reset...
>ahcich6: SATA connect time=100us status=00000123
>ahcich6: AHCI reset: device found
>ahcich7: AHCI reset...
>ahcich7: SATA connect time=1100us status=00000113
>ahcich7: AHCI reset: device found
>ahcich7: AHCI reset: device ready after 0ms
>ahcich2: AHCI reset: device ready after 100ms
>ahcich1: AHCI reset: device ready after 100ms
>ahcich3: AHCI reset: device ready after 100ms
>ahcich4: AHCI reset: device ready after 100ms
>ahcich5: AHCI reset: device ready after 100ms
>ahcich6: AHCI reset: device ready after 100ms
>uhub5: 4 ports with 4 removable, self powered
>uhub0: 5 ports with 5 removable, self powered
>uhub3: 5 ports with 5 removable, self powered
>uhub4: 4 ports with 4 removable, self powered
>uhub1: 5 ports with 5 removable, self powered
>uhub2: 5 ports with 5 removable, self powered
>ahcich0: AHCI reset: device ready after 200ms
>ugen3.2: <Avocent> at usbus3
>ukbd0: <Keyboard> on usbus3
>kbd0 at ukbd0
>kbd0: ukbd0, generic (0), config:0x0, flags:0x3d0000
>ugen1.2: <Seagate> at usbus1
>umass0: <Interface0> on usbus1
>umass0:  SCSI over Bulk-Only; quirks = 0x8100
>umass0:8:0:-1: Attached to scbus8
>(aprobe1:ahcich1:0:0:0): Spinning up device
>pmp0 at ahcich6 bus 0 scbus6 target 15 lun 0
>pmp0: <Port Multiplier 0325197b 000e> ATA device
>pmp0: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
>(aprobe1:ahcich1:0:0:0): Spin-up done
>pmp0: 15 fan-out ports
>pmp0: port 0 status: 00000123
>pmp0: port 1 status: 00000123
>pmp0: port 2 status: 00000123
>pmp0: port 3 status: 00000123
>pmp0: port 4 status: 00000000
>pmp0: port 5 status: 00000000
>pmp0: port 6 status: 00000000
>pmp0: port 7 status: 00000000
>pmp0: port 8 status: 00000000
>pmp0: port 9 status: 00000000
>pmp0: port 10 status: 00000000
>pmp0: port 11 status: 00000000
>pmp0: port 12 status: 00000000
>pmp0: port 13 status: 00000000
>pmp0: port 14 status: 00000000
>GEOM: new disk cd0
>GEOM: new disk da0
>pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
>da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
>da0: <Seagate FreeAgent 102D> Fixed Direct Access SPC-2 SCSI device
>da0: Serial Number 2GEVBXWH
>da0: 40.000MB/s transfers
>da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
>da0: quirks=0x2<NO_6_BYTE>
>da0: Delete methods: <NONE(*)>
>cd0 at ahcich7 bus 0 scbus7 target 0 lun 0
>cd0: <ATAPI iHAS120   X FL02> Removable CD-ROM SCSI device
>cd0: Serial Number 3520023 378245500691
>cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
>pass0: <Hitachi HDT721010SLA360 ST6OA31B> ATA-6 SATA 2.x device
>pass0: Serial Number STF601MH0MHHEB
>pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
>pass0: Command Queueing enabled
>pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
>pass1: <HDS722516VLSA80 V34OA6MA> ATA-6 SATA 1.x device
>pass1: Serial Number VN6DTECDEPJM1A
>pass1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>pass2 at ahcich2 bus 0 scbus2 target 0 lun 0
>pass2: <ST3000DM001-1E6166 SC48> ATA8-ACS SATA 3.x device
>pass2: Serial Number W1F4J851
>pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass3 at ahcich3 bus 0 scbus3 target 0 lun 0
>pass3: <ST3000DM001-1E6166 SC48> ATA8-ACS SATA 3.x device
>pass3: Serial Number W1F5KGCE
>pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass4 at ahcich4 bus 0 scbus4 target 0 lun 0
>pass4: <ST3000DM001-9YN166 CC82> ATA8-ACS SATA 3.x device
>pass4: Serial Number W1F1NWX4
>pass4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass4: Command Queueing enabled
>pass5 at ahcich5 bus 0 scbus5 target 0 lun 0
>pass5: <ST3000DM001-9YN166 CC82> ATA8-ACS SATA 3.x device
>pass5: Serial Number W1F1NXS7
>pass5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass5: Command Queueing enabled
>pass6 at ahcich6 bus 0 scbus6 target 0 lun 0
>pass6: <SAMSUNG HD154UI 1AG01118> ATA-7 SATA 2.x device
>pass6: Serial Number S1Y6JDWZ501578
>pass6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass6: Command Queueing enabled
>pass7 at ahcich6 bus 0 scbus6 target 1 lun 0
>pass7: <ST32000641AS CCA3> ATA8-ACS SATA 2.x device
>pass7: Serial Number 9WM1LG6S
>pass7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass7: Command Queueing enabled
>pass8 at ahcich6 bus 0 scbus6 target 2 lun 0
>pass8: <WDC WD40EFRX-68WT0N0 82.00A82> ACS-2 ATA SATA 3.x device
>pass8: Serial Number WD-WCC4E4EN0HVH
>pass8: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass8: Command Queueing enabled
>pass9 at ahcich6 bus 0 scbus6 target 3 lun 0
>pass9: <WDC WD40EFRX-68WT0N0 82.00A82> ACS-2 ATA SATA 3.x device
>pass9: Serial Number WD-WCC4E4ER46EN
>pass9: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass9: Command Queueing enabled
>pass10 at ahcich6 bus 0 scbus6 target 15 lun 0
>pass10: <Port Multiplier 0325197b 000e> ATA device
>pass10: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
>pass11 at ahcich7 bus 0 scbus7 target 0 lun 0
>pass11: <ATAPI iHAS120   X FL02> Removable CD-ROM SCSI device
>pass11: Serial Number 3520023 378245500691
>pass11: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
>pass12 at umass-sim0 bus 0 scbus8 target 0 lun 0
>pass12: <Seagate FreeAgent 102D> Fixed Direct Access SPC-2 SCSI device
>pass12: Serial Number 2GEVBXWH
>pass12: 40.000MB/s transfers
>ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>ada0: <Hitachi HDT721010SLA360 ST6OA31B> ATA-6 SATA 2.x device
>ada0: Serial Number STF601MH0MHHEB
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
>ada0: Command Queueing enabled
>ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
>ada0: Previously was known as ad4
>ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
>ada1: <HDS722516VLSA80 V34OA6MA> ATA-6 SATA 1.x device
>ada1: Serial Number VN6DTECDEPJM1A
>ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>ada1: 157066MB (321672960 512 byte sectors: 16H 63S/T 16383C)
>ada1: Previously was known as ad6
>ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
>ada2: <ST3000DM001-1E6166 SC48> ATA8-ACS SATA 3.x device
>ada2: Serial Number W1F4J851
>ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada2: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
>ada2: quirks=0x1<4K>
>ada2: Previously was known as ad8
>ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
>ada3: <ST3000DM001-1E6166 SC48> ATA8-ACS SATA 3.x device
>ada3: Serial Number W1F5KGCE
>ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
>ada3: quirks=0x1<4K>
>ada3: Previously was known as ad10
>ada4 at ahcich4 bus 0 scbus4 target 0 lun 0
>ada4: <ST3000DM001-9YN166 CC82> ATA8-ACS SATA 3.x device
>ada4: Serial Number W1F1NWX4
>ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada4: Command Queueing enabled
>ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
>ada4: quirks=0x1<4K>
>ada4: Previously was known as ad12
>ada5 at ahcich5 bus 0 scbus5 target 0 lun 0
>ada5: <ST3000DM001-9YN166 CC82> ATA8-ACS SATA 3.x device
>ada5: Serial Number W1F1NXS7
>ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada5: Command Queueing enabled
>ada5: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
>ada5: quirks=0x1<4K>
>ada5: Previously was known as ad14
>ada6 at ahcich6 bus 0 scbus6 target 0 lun 0
>ada6: <SAMSUNG HD154UI 1AG01118> ATA-7 SATA 2.x device
>ada6: Serial Number S1Y6JDWZ501578
>ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada6: Command Queueing enabled
>ada6: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
>ada6: Previously was known as ad16
>ada7 at ahcich6 bus 0 scbus6 target 1 lun 0
>ada7: <ST32000641AS CCA3> ATA8-ACS SATA 2.x device
>ada7: Serial Number 9WM1LG6S
>ada7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada7: Command Queueing enabled
>ada7: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
>ada7: Previously was known as ad17
>ada8 at ahcich6 bus 0 scbus6 target 2 lun 0
>ada8: <WDC WD40EFRX-68WT0N0 82.00A82> ACS-2 ATA SATA 3.x device
>ada8: Serial Number WD-WCC4E4EN0HVH
>ada8: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada8: Command Queueing enabled
>ada8: 3815447MB (7814037168 512 byte sectors: 16H 63S/T 16383C)
>ada8: quirks=0x1<4K>
>ada9 at ahcich6 bus 0 scbus6 target 3 lun 0
>ada9: <WDC WD40EFRX-68WT0N0 82.00A82> ACS-2 ATA SATA 3.x device
>ada9: Serial Number WD-WCC4E4ER46EN
>ada9: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada9: Command Queueing enabled
>ada9: 3815447MB (7814037168 512 byte sectors: 16H 63S/T 16383C)
>ada9: quirks=0x1<4K>
>GEOM: new disk ada0
>GEOM: new disk ada1
>GEOM: new disk ada2
>GEOM: new disk ada3
>GEOM: new disk ada4
>GEOM: new disk ada5
>GEOM: new disk ada6
>GEOM: new disk ada7
>GEOM: new disk ada8
>GEOM: new disk ada9
>Netvsc initializing... done!
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>    ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 49
>msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 50
>msi: Assigning MSI IRQ 259 to local APIC 1 vector 51
>SMP: passed TSC synchronization test
>Timecounter "TSC" frequency 1498193376 Hz quality 800
>GEOM: ada7: corrupt or invalid GPT detected.
>GEOM: ada7: GPT rejected -- may not be recoverable.
>GEOM: label/box0slot1: corrupt or invalid GPT detected.
>GEOM: label/box0slot1: GPT rejected -- may not be recoverable.
>GEOM: diskid/DISK-9WM1LG6S: corrupt or invalid GPT detected.
>GEOM: diskid/DISK-9WM1LG6S: GPT rejected -- may not be recoverable.
>Trying to mount root from ufs:/dev/ada0p2 [rw]...
>start_init: trying /sbin/init
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Linux ELF exec handler installed
>linprocfs registered
>bge0: Disabling fastboot
>bge0: Disabling fastboot
>ums0: <Mouse> on usbus3
>ums0: 3 buttons and [Z] coordinates ID=0
>ums1: <Mouse REL> on usbus3
>ums1: 3 buttons and [XYZ] coordinates ID=0

Actions: View

Attachments on bug 186346: 161585 | 161645