Attachment 162478 Details for Bug 204043 – pandaboard dts

pandaboard dts

pandaboard-preprocessed.dts (text/plain), 34.17 KB, created by Ed Maste on 2015-10-26 18:27:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ed Maste

Created: 2015-10-26 18:27:39 UTC

Size: 34.17 KB

patch

obsolete

>
>
>
>
>
>
>
>/dts-v1/;
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>/ {
> #address-cells = <1>;
>
> #size-cells = <1>;
>
> chosen { };
> aliases { };
> memory { device_type = "memory"; reg = <0 0>; };
>};
>
>/ {
> compatible = "ti,omap4430", "ti,omap4";
> interrupt-parent = <&gic>;
>
> aliases {
>  i2c0 = &i2c1;
>  i2c1 = &i2c2;
>  i2c2 = &i2c3;
>  i2c3 = &i2c4;
>  serial0 = &uart1;
>  serial1 = &uart2;
>  serial2 = &uart3;
>  serial3 = &uart4;
> };
>
> cpus {
>  #address-cells = <1>;
>
>  #size-cells = <0>;
>
>
>  cpu@0 {
>   compatible = "arm,cortex-a9";
>   device_type = "cpu";
>   next-level-cache = <&L2>;
>   reg = <0x0>;
>
>   clocks = <&dpll_mpu_ck>;
>   clock-names = "cpu";
>
>   clock-latency = <300000>;
>  };
>  cpu@1 {
>   compatible = "arm,cortex-a9";
>   device_type = "cpu";
>   next-level-cache = <&L2>;
>   reg = <0x1>;
>  };
> };
>
> gic: interrupt-controller@48241000 {
>  compatible = "arm,cortex-a9-gic";
>  interrupt-controller;
>  #interrupt-cells = <3>;
>
>  reg = <0x48241000 0x1000>,
>        <0x48240100 0x0100>;
> };
>
> L2: l2-cache-controller@48242000 {
>  compatible = "arm,pl310-cache";
>  reg = <0x48242000 0x1000>;
>  cache-unified;
>  cache-level = <2>;
> };
>
> local-timer@48240600 {
>  compatible = "arm,cortex-a9-twd-timer";
>  clocks = <&mpu_periphclk>;
>  reg = <0x48240600 0x20>;
>  interrupts = <1 13 (((3) << 8) | 4)>;
> };
>
>
>
>
>
> soc {
>  compatible = "ti,omap-infra";
>  mpu {
>   compatible = "ti,omap4-mpu";
>   ti,hwmods = "mpu";
>   sram = <&ocmcram>;
>  };
>
>  dsp {
>   compatible = "ti,omap3-c64";
>   ti,hwmods = "dsp";
>  };
>
>  iva {
>   compatible = "ti,ivahd";
>   ti,hwmods = "iva";
>  };
> };
> ocp {
>  compatible = "ti,omap4-l3-noc", "simple-bus";
>  #address-cells = <1>;
>
>  #size-cells = <1>;
>
>  ranges;
>  ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
>  reg = <0x44000000 0x1000>,
>        <0x44800000 0x2000>,
>        <0x45000000 0x1000>;
>  interrupts = <0 9 4>,
>        <0 10 4>;
>
>  cm1: cm1@4a004000 {
>   compatible = "ti,omap4-cm1";
>   reg = <0x4a004000 0x2000>;
>
>   cm1_clocks: clocks {
>    #address-cells = <1>;
>
>    #size-cells = <0>;
>
>   };
>
>   cm1_clockdomains: clockdomains {
>   };
>  };
>
>  prm: prm@4a306000 {
>   compatible = "ti,omap4-prm";
>   reg = <0x4a306000 0x3000>;
>   interrupts = <0 11 4>;
>
>   prm_clocks: clocks {
>    #address-cells = <1>;
>
>    #size-cells = <0>;
>
>   };
>
>   prm_clockdomains: clockdomains {
>   };
>  };
>
>  cm2: cm2@4a008000 {
>   compatible = "ti,omap4-cm2";
>   reg = <0x4a008000 0x3000>;
>
>   cm2_clocks: clocks {
>    #address-cells = <1>;
>
>    #size-cells = <0>;
>
>   };
>
>   cm2_clockdomains: clockdomains {
>   };
>  };
>
>  scrm: scrm@4a30a000 {
>   compatible = "ti,omap4-scrm";
>   reg = <0x4a30a000 0x2000>;
>
>   scrm_clocks: clocks {
>    #address-cells = <1>;
>
>    #size-cells = <0>;
>
>   };
>
>   scrm_clockdomains: clockdomains {
>   };
>  };
>
>  counter32k: counter@4a304000 {
>   compatible = "ti,omap-counter32k";
>   reg = <0x4a304000 0x20>;
>   ti,hwmods = "counter_32k";
>  };
>
>  omap4_pmx_core: pinmux@4a100040 {
>   compatible = "ti,omap4-padconf", "pinctrl-single";
>   reg = <0x4a100040 0x0196>;
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   #interrupt-cells = <1>;
>
>   interrupt-controller;
>   pinctrl-single,register-width = <16>;
>   pinctrl-single,function-mask = <0x7fff>;
>  };
>  omap4_pmx_wkup: pinmux@4a31e040 {
>   compatible = "ti,omap4-padconf", "pinctrl-single";
>   reg = <0x4a31e040 0x0038>;
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   #interrupt-cells = <1>;
>
>   interrupt-controller;
>   pinctrl-single,register-width = <16>;
>   pinctrl-single,function-mask = <0x7fff>;
>  };
>
>  omap4_padconf_global: tisyscon@4a1005a0 {
>   compatible = "syscon";
>   reg = <0x4a1005a0 0x170>;
>  };
>
>  pbias_regulator: pbias_regulator {
>   compatible = "ti,pbias-omap";
>   reg = <0x60 0x4>;
>   syscon = <&omap4_padconf_global>;
>   pbias_mmc_reg: pbias_mmc_omap4 {
>    regulator-name = "pbias_mmc_omap4";
>    regulator-min-microvolt = <1800000>;
>    regulator-max-microvolt = <3000000>;
>   };
>  };
>
>  ocmcram: ocmcram@40304000 {
>   compatible = "mmio-sram";
>   reg = <0x40304000 0xa000>;
>  };
>
>  sdma: dma-controller@4a056000 {
>   compatible = "ti,omap4430-sdma";
>   reg = <0x4a056000 0x1000>;
>   interrupts = <0 12 4>,
>         <0 13 4>,
>         <0 14 4>,
>         <0 15 4>;
>   #dma-cells = <1>;
>
>   #dma-channels = <32>;
>
>   #dma-requests = <127>;
>
>  };
>
>  gpio1: gpio@4a310000 {
>   compatible = "ti,omap4-gpio";
>   reg = <0x4a310000 0x200>;
>   interrupts = <0 29 4>;
>   ti,hwmods = "gpio1";
>   ti,gpio-always-on;
>   gpio-controller;
>   #gpio-cells = <2>;
>
>   interrupt-controller;
>   #interrupt-cells = <2>;
>
>  };
>
>  gpio2: gpio@48055000 {
>   compatible = "ti,omap4-gpio";
>   reg = <0x48055000 0x200>;
>   interrupts = <0 30 4>;
>   ti,hwmods = "gpio2";
>   gpio-controller;
>   #gpio-cells = <2>;
>
>   interrupt-controller;
>   #interrupt-cells = <2>;
>
>  };
>
>  gpio3: gpio@48057000 {
>   compatible = "ti,omap4-gpio";
>   reg = <0x48057000 0x200>;
>   interrupts = <0 31 4>;
>   ti,hwmods = "gpio3";
>   gpio-controller;
>   #gpio-cells = <2>;
>
>   interrupt-controller;
>   #interrupt-cells = <2>;
>
>  };
>
>  gpio4: gpio@48059000 {
>   compatible = "ti,omap4-gpio";
>   reg = <0x48059000 0x200>;
>   interrupts = <0 32 4>;
>   ti,hwmods = "gpio4";
>   gpio-controller;
>   #gpio-cells = <2>;
>
>   interrupt-controller;
>   #interrupt-cells = <2>;
>
>  };
>
>  gpio5: gpio@4805b000 {
>   compatible = "ti,omap4-gpio";
>   reg = <0x4805b000 0x200>;
>   interrupts = <0 33 4>;
>   ti,hwmods = "gpio5";
>   gpio-controller;
>   #gpio-cells = <2>;
>
>   interrupt-controller;
>   #interrupt-cells = <2>;
>
>  };
>
>  gpio6: gpio@4805d000 {
>   compatible = "ti,omap4-gpio";
>   reg = <0x4805d000 0x200>;
>   interrupts = <0 34 4>;
>   ti,hwmods = "gpio6";
>   gpio-controller;
>   #gpio-cells = <2>;
>
>   interrupt-controller;
>   #interrupt-cells = <2>;
>
>  };
>
>  gpmc: gpmc@50000000 {
>   compatible = "ti,omap4430-gpmc";
>   reg = <0x50000000 0x1000>;
>   #address-cells = <2>;
>
>   #size-cells = <1>;
>
>   interrupts = <0 20 4>;
>   gpmc,num-cs = <8>;
>   gpmc,num-waitpins = <4>;
>   ti,hwmods = "gpmc";
>   ti,no-idle-on-init;
>   clocks = <&l3_div_ck>;
>   clock-names = "fck";
>  };
>
>  uart1: serial@4806a000 {
>   compatible = "ti,omap4-uart";
>   reg = <0x4806a000 0x100>;
>   interrupts = <0 72 4>;
>   ti,hwmods = "uart1";
>   clock-frequency = <48000000>;
>  };
>
>  uart2: serial@4806c000 {
>   compatible = "ti,omap4-uart";
>   reg = <0x4806c000 0x100>;
>   interrupts-extended = <&gic 0 73 4>;
>   ti,hwmods = "uart2";
>   clock-frequency = <48000000>;
>  };
>
>  uart3: serial@48020000 {
>   compatible = "ti,omap4-uart";
>   reg = <0x48020000 0x100>;
>   interrupts-extended = <&gic 0 74 4>;
>   ti,hwmods = "uart3";
>   clock-frequency = <48000000>;
>  };
>
>  uart4: serial@4806e000 {
>   compatible = "ti,omap4-uart";
>   reg = <0x4806e000 0x100>;
>   interrupts-extended = <&gic 0 70 4>;
>   ti,hwmods = "uart4";
>   clock-frequency = <48000000>;
>  };
>
>  hwspinlock: spinlock@4a0f6000 {
>   compatible = "ti,omap4-hwspinlock";
>   reg = <0x4a0f6000 0x1000>;
>   ti,hwmods = "spinlock";
>   #hwlock-cells = <1>;
>
>  };
>
>  i2c1: i2c@48070000 {
>   compatible = "ti,omap4-i2c";
>   reg = <0x48070000 0x100>;
>   interrupts = <0 56 4>;
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "i2c1";
>  };
>
>  i2c2: i2c@48072000 {
>   compatible = "ti,omap4-i2c";
>   reg = <0x48072000 0x100>;
>   interrupts = <0 57 4>;
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "i2c2";
>  };
>
>  i2c3: i2c@48060000 {
>   compatible = "ti,omap4-i2c";
>   reg = <0x48060000 0x100>;
>   interrupts = <0 61 4>;
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "i2c3";
>  };
>
>  i2c4: i2c@48350000 {
>   compatible = "ti,omap4-i2c";
>   reg = <0x48350000 0x100>;
>   interrupts = <0 62 4>;
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "i2c4";
>  };
>
>  mcspi1: spi@48098000 {
>   compatible = "ti,omap4-mcspi";
>   reg = <0x48098000 0x200>;
>   interrupts = <0 65 4>;
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "mcspi1";
>   ti,spi-num-cs = <4>;
>   dmas = <&sdma 35>,
>          <&sdma 36>,
>          <&sdma 37>,
>          <&sdma 38>,
>          <&sdma 39>,
>          <&sdma 40>,
>          <&sdma 41>,
>          <&sdma 42>;
>   dma-names = "tx0", "rx0", "tx1", "rx1",
>        "tx2", "rx2", "tx3", "rx3";
>  };
>
>  mcspi2: spi@4809a000 {
>   compatible = "ti,omap4-mcspi";
>   reg = <0x4809a000 0x200>;
>   interrupts = <0 66 4>;
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "mcspi2";
>   ti,spi-num-cs = <2>;
>   dmas = <&sdma 43>,
>          <&sdma 44>,
>          <&sdma 45>,
>          <&sdma 46>;
>   dma-names = "tx0", "rx0", "tx1", "rx1";
>  };
>
>  mcspi3: spi@480b8000 {
>   compatible = "ti,omap4-mcspi";
>   reg = <0x480b8000 0x200>;
>   interrupts = <0 91 4>;
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "mcspi3";
>   ti,spi-num-cs = <2>;
>   dmas = <&sdma 15>, <&sdma 16>;
>   dma-names = "tx0", "rx0";
>  };
>
>  mcspi4: spi@480ba000 {
>   compatible = "ti,omap4-mcspi";
>   reg = <0x480ba000 0x200>;
>   interrupts = <0 48 4>;
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "mcspi4";
>   ti,spi-num-cs = <1>;
>   dmas = <&sdma 70>, <&sdma 71>;
>   dma-names = "tx0", "rx0";
>  };
>
>  mmc1: mmc@4809c000 {
>   compatible = "ti,omap4-hsmmc";
>   reg = <0x4809c000 0x400>;
>   interrupts = <0 83 4>;
>   ti,hwmods = "mmc1";
>   ti,dual-volt;
>   ti,needs-special-reset;
>   dmas = <&sdma 61>, <&sdma 62>;
>   dma-names = "tx", "rx";
>   pbias-supply = <&pbias_mmc_reg>;
>  };
>
>  mmc2: mmc@480b4000 {
>   compatible = "ti,omap4-hsmmc";
>   reg = <0x480b4000 0x400>;
>   interrupts = <0 86 4>;
>   ti,hwmods = "mmc2";
>   ti,needs-special-reset;
>   dmas = <&sdma 47>, <&sdma 48>;
>   dma-names = "tx", "rx";
>  };
>
>  mmc3: mmc@480ad000 {
>   compatible = "ti,omap4-hsmmc";
>   reg = <0x480ad000 0x400>;
>   interrupts = <0 94 4>;
>   ti,hwmods = "mmc3";
>   ti,needs-special-reset;
>   dmas = <&sdma 77>, <&sdma 78>;
>   dma-names = "tx", "rx";
>  };
>
>  mmc4: mmc@480d1000 {
>   compatible = "ti,omap4-hsmmc";
>   reg = <0x480d1000 0x400>;
>   interrupts = <0 96 4>;
>   ti,hwmods = "mmc4";
>   ti,needs-special-reset;
>   dmas = <&sdma 57>, <&sdma 58>;
>   dma-names = "tx", "rx";
>  };
>
>  mmc5: mmc@480d5000 {
>   compatible = "ti,omap4-hsmmc";
>   reg = <0x480d5000 0x400>;
>   interrupts = <0 59 4>;
>   ti,hwmods = "mmc5";
>   ti,needs-special-reset;
>   dmas = <&sdma 59>, <&sdma 60>;
>   dma-names = "tx", "rx";
>  };
>
>  mmu_dsp: mmu@4a066000 {
>   compatible = "ti,omap4-iommu";
>   reg = <0x4a066000 0x100>;
>   interrupts = <0 28 4>;
>   ti,hwmods = "mmu_dsp";
>  };
>
>  mmu_ipu: mmu@55082000 {
>   compatible = "ti,omap4-iommu";
>   reg = <0x55082000 0x100>;
>   interrupts = <0 100 4>;
>   ti,hwmods = "mmu_ipu";
>   ti,iommu-bus-err-back;
>  };
>
>  wdt2: wdt@4a314000 {
>   compatible = "ti,omap4-wdt", "ti,omap3-wdt";
>   reg = <0x4a314000 0x80>;
>   interrupts = <0 80 4>;
>   ti,hwmods = "wd_timer2";
>  };
>
>  mcpdm: mcpdm@40132000 {
>   compatible = "ti,omap4-mcpdm";
>   reg = <0x40132000 0x7f>,
>         <0x49032000 0x7f>;
>   reg-names = "mpu", "dma";
>   interrupts = <0 112 4>;
>   ti,hwmods = "mcpdm";
>   dmas = <&sdma 65>,
>          <&sdma 66>;
>   dma-names = "up_link", "dn_link";
>   status = "disabled";
>  };
>
>  dmic: dmic@4012e000 {
>   compatible = "ti,omap4-dmic";
>   reg = <0x4012e000 0x7f>,
>         <0x4902e000 0x7f>;
>   reg-names = "mpu", "dma";
>   interrupts = <0 114 4>;
>   ti,hwmods = "dmic";
>   dmas = <&sdma 67>;
>   dma-names = "up_link";
>   status = "disabled";
>  };
>
>  mcbsp1: mcbsp@40122000 {
>   compatible = "ti,omap4-mcbsp";
>   reg = <0x40122000 0xff>,
>         <0x49022000 0xff>;
>   reg-names = "mpu", "dma";
>   interrupts = <0 17 4>;
>   interrupt-names = "common";
>   ti,buffer-size = <128>;
>   ti,hwmods = "mcbsp1";
>   dmas = <&sdma 33>,
>          <&sdma 34>;
>   dma-names = "tx", "rx";
>   status = "disabled";
>  };
>
>  mcbsp2: mcbsp@40124000 {
>   compatible = "ti,omap4-mcbsp";
>   reg = <0x40124000 0xff>,
>         <0x49024000 0xff>;
>   reg-names = "mpu", "dma";
>   interrupts = <0 22 4>;
>   interrupt-names = "common";
>   ti,buffer-size = <128>;
>   ti,hwmods = "mcbsp2";
>   dmas = <&sdma 17>,
>          <&sdma 18>;
>   dma-names = "tx", "rx";
>   status = "disabled";
>  };
>
>  mcbsp3: mcbsp@40126000 {
>   compatible = "ti,omap4-mcbsp";
>   reg = <0x40126000 0xff>,
>         <0x49026000 0xff>;
>   reg-names = "mpu", "dma";
>   interrupts = <0 23 4>;
>   interrupt-names = "common";
>   ti,buffer-size = <128>;
>   ti,hwmods = "mcbsp3";
>   dmas = <&sdma 19>,
>          <&sdma 20>;
>   dma-names = "tx", "rx";
>   status = "disabled";
>  };
>
>  mcbsp4: mcbsp@48096000 {
>   compatible = "ti,omap4-mcbsp";
>   reg = <0x48096000 0xff>;
>   reg-names = "mpu";
>   interrupts = <0 16 4>;
>   interrupt-names = "common";
>   ti,buffer-size = <128>;
>   ti,hwmods = "mcbsp4";
>   dmas = <&sdma 31>,
>          <&sdma 32>;
>   dma-names = "tx", "rx";
>   status = "disabled";
>  };
>
>  keypad: keypad@4a31c000 {
>   compatible = "ti,omap4-keypad";
>   reg = <0x4a31c000 0x80>;
>   interrupts = <0 120 4>;
>   reg-names = "mpu";
>   ti,hwmods = "kbd";
>  };
>
>  dmm@4e000000 {
>   compatible = "ti,omap4-dmm";
>   reg = <0x4e000000 0x800>;
>   interrupts = <0 113 0x4>;
>   ti,hwmods = "dmm";
>  };
>
>  emif1: emif@4c000000 {
>   compatible = "ti,emif-4d";
>   reg = <0x4c000000 0x100>;
>   interrupts = <0 110 4>;
>   ti,hwmods = "emif1";
>   ti,no-idle-on-init;
>   phy-type = <1>;
>   hw-caps-read-idle-ctrl;
>   hw-caps-ll-interface;
>   hw-caps-temp-alert;
>  };
>
>  emif2: emif@4d000000 {
>   compatible = "ti,emif-4d";
>   reg = <0x4d000000 0x100>;
>   interrupts = <0 111 4>;
>   ti,hwmods = "emif2";
>   ti,no-idle-on-init;
>   phy-type = <1>;
>   hw-caps-read-idle-ctrl;
>   hw-caps-ll-interface;
>   hw-caps-temp-alert;
>  };
>
>  ocp2scp@4a0ad000 {
>   compatible = "ti,omap-ocp2scp";
>   reg = <0x4a0ad000 0x1f>;
>   #address-cells = <1>;
>
>   #size-cells = <1>;
>
>   ranges;
>   ti,hwmods = "ocp2scp_usb_phy";
>   usb2_phy: usb2phy@4a0ad080 {
>    compatible = "ti,omap-usb2";
>    reg = <0x4a0ad080 0x58>;
>    ctrl-module = <&omap_control_usb2phy>;
>    clocks = <&usb_phy_cm_clk32k>;
>    clock-names = "wkupclk";
>    #phy-cells = <0>;
>
>   };
>  };
>
>  mailbox: mailbox@4a0f4000 {
>   compatible = "ti,omap4-mailbox";
>   reg = <0x4a0f4000 0x200>;
>   interrupts = <0 26 4>;
>   ti,hwmods = "mailbox";
>   #mbox-cells = <1>;
>
>   ti,mbox-num-users = <3>;
>   ti,mbox-num-fifos = <8>;
>   mbox_ipu: mbox_ipu {
>    ti,mbox-tx = <0 0 0>;
>    ti,mbox-rx = <1 0 0>;
>   };
>   mbox_dsp: mbox_dsp {
>    ti,mbox-tx = <3 0 0>;
>    ti,mbox-rx = <2 0 0>;
>   };
>  };
>
>  timer1: timer@4a318000 {
>   compatible = "ti,omap3430-timer";
>   reg = <0x4a318000 0x80>;
>   interrupts = <0 37 4>;
>   ti,hwmods = "timer1";
>   ti,timer-alwon;
>  };
>
>  timer2: timer@48032000 {
>   compatible = "ti,omap3430-timer";
>   reg = <0x48032000 0x80>;
>   interrupts = <0 38 4>;
>   ti,hwmods = "timer2";
>  };
>
>  timer3: timer@48034000 {
>   compatible = "ti,omap4430-timer";
>   reg = <0x48034000 0x80>;
>   interrupts = <0 39 4>;
>   ti,hwmods = "timer3";
>  };
>
>  timer4: timer@48036000 {
>   compatible = "ti,omap4430-timer";
>   reg = <0x48036000 0x80>;
>   interrupts = <0 40 4>;
>   ti,hwmods = "timer4";
>  };
>
>  timer5: timer@40138000 {
>   compatible = "ti,omap4430-timer";
>   reg = <0x40138000 0x80>,
>         <0x49038000 0x80>;
>   interrupts = <0 41 4>;
>   ti,hwmods = "timer5";
>   ti,timer-dsp;
>  };
>
>  timer6: timer@4013a000 {
>   compatible = "ti,omap4430-timer";
>   reg = <0x4013a000 0x80>,
>         <0x4903a000 0x80>;
>   interrupts = <0 42 4>;
>   ti,hwmods = "timer6";
>   ti,timer-dsp;
>  };
>
>  timer7: timer@4013c000 {
>   compatible = "ti,omap4430-timer";
>   reg = <0x4013c000 0x80>,
>         <0x4903c000 0x80>;
>   interrupts = <0 43 4>;
>   ti,hwmods = "timer7";
>   ti,timer-dsp;
>  };
>
>  timer8: timer@4013e000 {
>   compatible = "ti,omap4430-timer";
>   reg = <0x4013e000 0x80>,
>         <0x4903e000 0x80>;
>   interrupts = <0 44 4>;
>   ti,hwmods = "timer8";
>   ti,timer-pwm;
>   ti,timer-dsp;
>  };
>
>  timer9: timer@4803e000 {
>   compatible = "ti,omap4430-timer";
>   reg = <0x4803e000 0x80>;
>   interrupts = <0 45 4>;
>   ti,hwmods = "timer9";
>   ti,timer-pwm;
>  };
>
>  timer10: timer@48086000 {
>   compatible = "ti,omap3430-timer";
>   reg = <0x48086000 0x80>;
>   interrupts = <0 46 4>;
>   ti,hwmods = "timer10";
>   ti,timer-pwm;
>  };
>
>  timer11: timer@48088000 {
>   compatible = "ti,omap4430-timer";
>   reg = <0x48088000 0x80>;
>   interrupts = <0 47 4>;
>   ti,hwmods = "timer11";
>   ti,timer-pwm;
>  };
>
>  usbhstll: usbhstll@4a062000 {
>   compatible = "ti,usbhs-tll";
>   reg = <0x4a062000 0x1000>;
>   interrupts = <0 78 4>;
>   ti,hwmods = "usb_tll_hs";
>  };
>
>  usbhshost: usbhshost@4a064000 {
>   compatible = "ti,usbhs-host";
>   reg = <0x4a064000 0x800>;
>   ti,hwmods = "usb_host_hs";
>   #address-cells = <1>;
>
>   #size-cells = <1>;
>
>   ranges;
>   clocks = <&init_60m_fclk>,
>     <&xclk60mhsp1_ck>,
>     <&xclk60mhsp2_ck>;
>   clock-names = "refclk_60m_int",
>          "refclk_60m_ext_p1",
>          "refclk_60m_ext_p2";
>
>   usbhsohci: ohci@4a064800 {
>    compatible = "ti,ohci-omap3";
>    reg = <0x4a064800 0x400>;
>    interrupt-parent = <&gic>;
>    interrupts = <0 76 4>;
>   };
>
>   usbhsehci: ehci@4a064c00 {
>    compatible = "ti,ehci-omap";
>    reg = <0x4a064c00 0x400>;
>    interrupt-parent = <&gic>;
>    interrupts = <0 77 4>;
>   };
>  };
>
>  omap_control_usb2phy: control-phy@4a002300 {
>   compatible = "ti,control-phy-usb2";
>   reg = <0x4a002300 0x4>;
>   reg-names = "power";
>  };
>
>  omap_control_usbotg: control-phy@4a00233c {
>   compatible = "ti,control-phy-otghs";
>   reg = <0x4a00233c 0x4>;
>   reg-names = "otghs_control";
>  };
>
>  usb_otg_hs: usb_otg_hs@4a0ab000 {
>   compatible = "ti,omap4-musb";
>   reg = <0x4a0ab000 0x7ff>;
>   interrupts = <0 92 4>, <0 93 4>;
>   interrupt-names = "mc", "dma";
>   ti,hwmods = "usb_otg_hs";
>   usb-phy = <&usb2_phy>;
>   phys = <&usb2_phy>;
>   phy-names = "usb2-phy";
>   multipoint = <1>;
>   num-eps = <16>;
>   ram-bits = <12>;
>   ctrl-module = <&omap_control_usbotg>;
>  };
>
>  aes: aes@4b501000 {
>   compatible = "ti,omap4-aes";
>   ti,hwmods = "aes";
>   reg = <0x4b501000 0xa0>;
>   interrupts = <0 85 4>;
>   dmas = <&sdma 111>, <&sdma 110>;
>   dma-names = "tx", "rx";
>  };
>
>  des: des@480a5000 {
>   compatible = "ti,omap4-des";
>   ti,hwmods = "des";
>   reg = <0x480a5000 0xa0>;
>   interrupts = <0 82 4>;
>   dmas = <&sdma 117>, <&sdma 116>;
>   dma-names = "tx", "rx";
>  };
>
>  abb_mpu: regulator-abb-mpu {
>   compatible = "ti,abb-v2";
>   regulator-name = "abb_mpu";
>   #address-cells = <0>;
>
>   #size-cells = <0>;
>
>   ti,tranxdone-status-mask = <0x80>;
>   clocks = <&sys_clkin_ck>;
>   ti,settling-time = <50>;
>   ti,clock-cycles = <16>;
>
>   status = "disabled";
>  };
>
>  abb_iva: regulator-abb-iva {
>   compatible = "ti,abb-v2";
>   regulator-name = "abb_iva";
>   #address-cells = <0>;
>
>   #size-cells = <0>;
>
>   ti,tranxdone-status-mask = <0x80000000>;
>   clocks = <&sys_clkin_ck>;
>   ti,settling-time = <50>;
>   ti,clock-cycles = <16>;
>
>   status = "disabled";
>  };
>
>  dss: dss@58000000 {
>   compatible = "ti,omap4-dss";
>   reg = <0x58000000 0x80>;
>   status = "disabled";
>   ti,hwmods = "dss_core";
>   clocks = <&dss_dss_clk>;
>   clock-names = "fck";
>   #address-cells = <1>;
>
>   #size-cells = <1>;
>
>   ranges;
>
>   dispc@58001000 {
>    compatible = "ti,omap4-dispc";
>    reg = <0x58001000 0x1000>;
>    interrupts = <0 25 4>;
>    ti,hwmods = "dss_dispc";
>    clocks = <&dss_dss_clk>;
>    clock-names = "fck";
>   };
>
>   rfbi: encoder@58002000 {
>    compatible = "ti,omap4-rfbi";
>    reg = <0x58002000 0x1000>;
>    status = "disabled";
>    ti,hwmods = "dss_rfbi";
>    clocks = <&dss_dss_clk>, <&l3_div_ck>;
>    clock-names = "fck", "ick";
>   };
>
>   venc: encoder@58003000 {
>    compatible = "ti,omap4-venc";
>    reg = <0x58003000 0x1000>;
>    status = "disabled";
>    ti,hwmods = "dss_venc";
>    clocks = <&dss_tv_clk>;
>    clock-names = "fck";
>   };
>
>   dsi1: encoder@58004000 {
>    compatible = "ti,omap4-dsi";
>    reg = <0x58004000 0x200>,
>          <0x58004200 0x40>,
>          <0x58004300 0x20>;
>    reg-names = "proto", "phy", "pll";
>    interrupts = <0 53 4>;
>    status = "disabled";
>    ti,hwmods = "dss_dsi1";
>    clocks = <&dss_dss_clk>, <&dss_sys_clk>;
>    clock-names = "fck", "sys_clk";
>   };
>
>   dsi2: encoder@58005000 {
>    compatible = "ti,omap4-dsi";
>    reg = <0x58005000 0x200>,
>          <0x58005200 0x40>,
>          <0x58005300 0x20>;
>    reg-names = "proto", "phy", "pll";
>    interrupts = <0 84 4>;
>    status = "disabled";
>    ti,hwmods = "dss_dsi2";
>    clocks = <&dss_dss_clk>, <&dss_sys_clk>;
>    clock-names = "fck", "sys_clk";
>   };
>
>   hdmi: encoder@58006000 {
>    compatible = "ti,omap4-hdmi";
>    reg = <0x58006000 0x200>,
>          <0x58006200 0x100>,
>          <0x58006300 0x100>,
>          <0x58006400 0x1000>;
>    reg-names = "wp", "pll", "phy", "core";
>    interrupts = <0 101 4>;
>    status = "disabled";
>    ti,hwmods = "dss_hdmi";
>    clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
>    clock-names = "fck", "sys_clk";
>    dmas = <&sdma 76>;
>    dma-names = "audio_tx";
>   };
>  };
> };
>};
>
>/include/ "omap44xx-clocks.dtsi"
>
>/ {
> cpus {
>  cpu0: cpu@0 {
>
>   operating-points = <
>
>    300000 1025000
>    600000 1200000
>    800000 1313000
>    1008000 1375000
>   >;
>   clock-latency = <300000>;
>
>
>   cooling-min-level = <0>;
>   cooling-max-level = <3>;
>   #cooling-cells = <2>; 
>
>  };
> };
>
> thermal-zones {
>
>
>cpu_thermal: cpu_thermal {
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
>
>        thermal-sensors = <&bandgap 0>;
>
>        trips {
>                cpu_alert0: cpu_alert {
>                        temperature = <100000>;
>                        hysteresis = <2000>;
>                        type = "passive";
>                };
>                cpu_crit: cpu_crit {
>                        temperature = <125000>;
>                        hysteresis = <2000>;
>                        type = "critical";
>                };
>        };
>
> cooling-maps {
>  map0 {
>   trip = <&cpu_alert0>;
>   cooling-device =
>    <&cpu0 (~0) (~0)>;
>  };
> };
>};
> };
>
> ocp {
>  bandgap: bandgap {
>   reg = <0x4a002260 0x4
>          0x4a00232C 0x4>;
>   compatible = "ti,omap4430-bandgap";
>
>   #thermal-sensor-cells = <0>;
>
>  };
> };
>
> ocp {
>  abb_mpu: regulator-abb-mpu {
>   status = "okay";
>
>   reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
>   reg-names = "base-address", "int-address";
>
>   ti,abb_info = <
>
>   1025000 0 0 0 0 0
>   1200000 0 0 0 0 0
>   1313000 0 0 0 0 0
>   1375000 1 0 0 0 0
>   1389000 1 0 0 0 0
>   >;
>  };
>
>
>  abb_iva: regulator-abb-iva {
>   reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
>   reg-names = "base-address", "int-address";
>  };
>
> };
>
>};
>
>/include/ "omap443x-clocks.dtsi"
>
>
>
>
>
>
>
>
>
>
>
>/ {
> elpida_ECB240ABACN: lpddr2 {
>  compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
>  density = <2048>;
>  io-width = <32>;
>
>  tRPab-min-tck = <3>;
>  tRCD-min-tck = <3>;
>  tWR-min-tck = <3>;
>  tRASmin-min-tck = <3>;
>  tRRD-min-tck = <2>;
>  tWTR-min-tck = <2>;
>  tXP-min-tck = <2>;
>  tRTP-min-tck = <2>;
>  tCKE-min-tck = <3>;
>  tCKESR-min-tck = <3>;
>  tFAW-min-tck = <8>;
>
>  timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
>   compatible = "jedec,lpddr2-timings";
>   min-freq = <10000000>;
>   max-freq = <400000000>;
>   tRPab = <21000>;
>   tRCD = <18000>;
>   tWR = <15000>;
>   tRAS-min = <42000>;
>   tRRD = <10000>;
>   tWTR = <7500>;
>   tXP = <7500>;
>   tRTP = <7500>;
>   tCKESR = <15000>;
>   tDQSCK-max = <5500>;
>   tFAW = <50000>;
>   tZQCS = <90000>;
>   tZQCL = <360000>;
>   tZQinit = <1000000>;
>   tRAS-max-ns = <70000>;
>   tDQSCK-max-derated = <6000>;
>  };
>
>  timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
>   compatible = "jedec,lpddr2-timings";
>   min-freq = <10000000>;
>   max-freq = <200000000>;
>   tRPab = <21000>;
>   tRCD = <18000>;
>   tWR = <15000>;
>   tRAS-min = <42000>;
>   tRRD = <10000>;
>   tWTR = <10000>;
>   tXP = <7500>;
>   tRTP = <7500>;
>   tCKESR = <15000>;
>   tDQSCK-max = <5500>;
>   tFAW = <50000>;
>   tZQCS = <90000>;
>   tZQCL = <360000>;
>   tZQinit = <1000000>;
>   tRAS-max-ns = <70000>;
>   tDQSCK-max-derated = <6000>;
>  };
> };
>};
>
>/ {
> memory {
>  device_type = "memory";
>  reg = <0x80000000 0x40000000>;
> };
>
> aliases {
>  display0 = &dvi0;
>  display1 = &hdmi0;
> };
>
> leds: leds {
>  compatible = "gpio-leds";
>  pinctrl-names = "default";
>  pinctrl-0 = <
>   &led_wkgpio_pins
>  >;
>
>  heartbeat {
>   label = "pandaboard::status1";
>   gpios = <&gpio1 7 0>;
>   linux,default-trigger = "heartbeat";
>  };
>
>  mmc {
>   label = "pandaboard::status2";
>   gpios = <&gpio1 8 0>;
>   linux,default-trigger = "mmc0";
>  };
> };
>
> sound: sound {
>  compatible = "ti,abe-twl6040";
>  ti,model = "PandaBoard";
>
>  ti,mclk-freq = <38400000>;
>
>  ti,mcpdm = <&mcpdm>;
>
>  ti,twl6040 = <&twl6040>;
>
>
>  ti,audio-routing =
>   "Headset Stereophone", "HSOL",
>   "Headset Stereophone", "HSOR",
>   "Ext Spk", "HFL",
>   "Ext Spk", "HFR",
>   "Line Out", "AUXL",
>   "Line Out", "AUXR",
>   "HSMIC", "Headset Mic",
>   "Headset Mic", "Headset Mic Bias",
>   "AFML", "Line In",
>   "AFMR", "Line In";
> };
>
>
> hsusb1_power: hsusb1_power_reg {
>  compatible = "regulator-fixed";
>  regulator-name = "hsusb1_vbus";
>  regulator-min-microvolt = <3300000>;
>  regulator-max-microvolt = <3300000>;
>  gpio = <&gpio1 1 0>;
>  startup-delay-us = <70000>;
>  enable-active-high;
>
>
>
>
>
>  regulator-always-on;
>  regulator-boot-on;
> };
>
>
> hsusb1_phy: hsusb1_phy {
>  compatible = "usb-nop-xceiv";
>  reset-gpios = <&gpio2 30 1>;
>  vcc-supply = <&hsusb1_power>;
>  clocks = <&auxclk3_ck>;
>  clock-names = "main_clk";
>  clock-frequency = <19200000>;
> };
>
>
> wl12xx_vmmc: wl12xx_vmmc {
>  pinctrl-names = "default";
>  pinctrl-0 = <&wl12xx_gpio>;
>  compatible = "regulator-fixed";
>  regulator-name = "vwl1271";
>  regulator-min-microvolt = <1800000>;
>  regulator-max-microvolt = <1800000>;
>  gpio = <&gpio2 11 0>;
>  startup-delay-us = <70000>;
>  enable-active-high;
> };
>
> tfp410: encoder@0 {
>  compatible = "ti,tfp410";
>  powerdown-gpios = <&gpio1 0 1>;
>
>  ports {
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>
>   port@0 {
>    reg = <0>;
>
>    tfp410_in: endpoint@0 {
>     remote-endpoint = <&dpi_out>;
>    };
>   };
>
>   port@1 {
>    reg = <1>;
>
>    tfp410_out: endpoint@0 {
>     remote-endpoint = <&dvi_connector_in>;
>    };
>   };
>  };
> };
>
> dvi0: connector@0 {
>  compatible = "dvi-connector";
>  label = "dvi";
>
>  digital;
>
>  ddc-i2c-bus = <&i2c3>;
>
>  port {
>   dvi_connector_in: endpoint {
>    remote-endpoint = <&tfp410_out>;
>   };
>  };
> };
>
> tpd12s015: encoder@1 {
>  compatible = "ti,tpd12s015";
>
>  gpios = <&gpio2 28 0>,
>   <&gpio2 9 0>,
>   <&gpio2 31 0>;
>
>  ports {
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>
>   port@0 {
>    reg = <0>;
>
>    tpd12s015_in: endpoint@0 {
>     remote-endpoint = <&hdmi_out>;
>    };
>   };
>
>   port@1 {
>    reg = <1>;
>
>    tpd12s015_out: endpoint@0 {
>     remote-endpoint = <&hdmi_connector_in>;
>    };
>   };
>  };
> };
>
> hdmi0: connector@1 {
>  compatible = "hdmi-connector";
>  label = "hdmi";
>
>  type = "a";
>
>  port {
>   hdmi_connector_in: endpoint {
>    remote-endpoint = <&tpd12s015_out>;
>   };
>  };
> };
>};
>
>&omap4_pmx_core {
> pinctrl-names = "default";
> pinctrl-0 = <
>   &dss_dpi_pins
>   &tfp410_pins
>   &dss_hdmi_pins
>   &tpd12s015_pins
>   &hsusbb1_pins
> >;
>
> twl6040_pins: pinmux_twl6040_pins {
>  pinctrl-single,pins = <
>   0xe0 (0 | 3)
>   0x160 ((1 << 8) | 0)
>  >;
> };
>
> mcpdm_pins: pinmux_mcpdm_pins {
>  pinctrl-single,pins = <
>   0xc6 (((1 << 3) | (1 << 8)) | 0)
>   0xc8 (((1 << 3) | (1 << 8)) | 0)
>   0xca (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0xcc (((1 << 3) | (1 << 8)) | 0)
>   0xce (((1 << 3) | (1 << 8)) | 0)
>  >;
> };
>
> mcbsp1_pins: pinmux_mcbsp1_pins {
>  pinctrl-single,pins = <
>   0xbe ((1 << 8) | 0)
>   0xc0 (((1 << 3) | (1 << 8)) | 0)
>   0xc2 ((0 | (1 << 3)) | 0)
>   0xc4 ((1 << 8) | 0)
>  >;
> };
>
> dss_dpi_pins: pinmux_dss_dpi_pins {
>  pinctrl-single,pins = <
>   0x122 (0 | 5)
>   0x124 (0 | 5)
>   0x126 (0 | 5)
>   0x128 (0 | 5)
>   0x12a (0 | 5)
>   0x12c (0 | 5)
>   0x12e (0 | 5)
>   0x130 (0 | 5)
>   0x132 (0 | 5)
>   0x134 (0 | 5)
>   0x136 (0 | 5)
>
>   0x174 (0 | 5)
>   0x176 (0 | 5)
>   0x178 (0 | 5)
>   0x17a (0 | 5)
>   0x17c (0 | 5)
>   0x17e (0 | 5)
>   0x180 (0 | 5)
>   0x182 (0 | 5)
>   0x184 (0 | 5)
>   0x186 (0 | 5)
>   0x188 (0 | 5)
>   0x18a (0 | 5)
>   0x18c (0 | 5)
>   0x18e (0 | 5)
>
>   0x190 (0 | 5)
>   0x192 (0 | 5)
>   0x194 (0 | 5)
>  >;
> };
>
> tfp410_pins: pinmux_tfp410_pins {
>  pinctrl-single,pins = <
>   0x144 (0 | 3)
>  >;
> };
>
> dss_hdmi_pins: pinmux_dss_hdmi_pins {
>  pinctrl-single,pins = <
>   0x5a (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0x5c (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0x5e (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>  >;
> };
>
> tpd12s015_pins: pinmux_tpd12s015_pins {
>  pinctrl-single,pins = <
>   0x22 (0 | 3)
>   0x48 (0 | 3)
>   0x58 (((1 << 3) | (1 << 8)) | 3)
>  >;
> };
>
> hsusbb1_pins: pinmux_hsusbb1_pins {
>  pinctrl-single,pins = <
>   0x82 (((1 << 3) | (1 << 8)) | 4)
>   0x84 (0 | 4)
>   0x86 (((1 << 3) | (1 << 8)) | 4)
>   0x88 (((1 << 3) | (1 << 8)) | 4)
>   0x8a (((1 << 3) | (1 << 8)) | 4)
>   0x8c (((1 << 3) | (1 << 8)) | 4)
>   0x8e (((1 << 3) | (1 << 8)) | 4)
>   0x90 (((1 << 3) | (1 << 8)) | 4)
>   0x92 (((1 << 3) | (1 << 8)) | 4)
>   0x94 (((1 << 3) | (1 << 8)) | 4)
>   0x96 (((1 << 3) | (1 << 8)) | 4)
>   0x98 (((1 << 3) | (1 << 8)) | 4)
>  >;
> };
>
> i2c1_pins: pinmux_i2c1_pins {
>  pinctrl-single,pins = <
>   0xe2 (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0xe4 (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>  >;
> };
>
> i2c2_pins: pinmux_i2c2_pins {
>  pinctrl-single,pins = <
>   0xe6 (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0xe8 (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>  >;
> };
>
> i2c3_pins: pinmux_i2c3_pins {
>  pinctrl-single,pins = <
>   0xea (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0xec (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>  >;
> };
>
> i2c4_pins: pinmux_i2c4_pins {
>  pinctrl-single,pins = <
>   0xee (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0xf0 (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>  >;
> };
>
>
>
>
>
> wl12xx_gpio: pinmux_wl12xx_gpio {
>  pinctrl-single,pins = <
>   0x26 (0 | 3)
>   0x2c (0 | 3)
>   0x30 ((0 | (1 << 3) | (1 << 4)) | 3)
>   0x32 ((0 | (1 << 3) | (1 << 4)) | 3)
>  >;
> };
>
>
> wl12xx_pins: pinmux_wl12xx_pins {
>  pinctrl-single,pins = <
>   0x38 ((1 << 8) | 3)
>   0x3a ((1 << 8) | 3)
>   0x108 (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0x10a (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0x10c (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0x10e (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0x110 (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>   0x112 (((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>  >;
> };
>};
>
>&omap4_pmx_wkup {
> led_wkgpio_pins: pinmux_leds_wkpins {
>  pinctrl-single,pins = <
>   0x1a (0 | 3)
>   0x1c (0 | 3)
>  >;
> };
>};
>
>&i2c1 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c1_pins>;
>
> clock-frequency = <400000>;
>
> twl: twl@48 {
>  reg = <0x48>;
>
>  interrupts = <0 7 4>;
>  interrupt-parent = <&gic>;
> };
>
> twl6040: twl@4b {
>  compatible = "ti,twl6040";
>  reg = <0x4b>;
>
>  pinctrl-names = "default";
>  pinctrl-0 = <&twl6040_pins>;
>
>
>  interrupts = <0 119 4>;
>  interrupt-parent = <&gic>;
>  ti,audpwron-gpio = <&gpio4 31 0>;
>
>  vio-supply = <&v1v8>;
>  v2v1-supply = <&v2v1>;
>  enable-active-high;
> };
>};
>
>
>&twl {
> compatible = "ti,twl6030";
> interrupt-controller;
> #interrupt-cells = <1>;
>
>
> rtc {
>  compatible = "ti,twl4030-rtc";
>  interrupts = <11>;
> };
>
> vaux1: regulator-vaux1 {
>  compatible = "ti,twl6030-vaux1";
>  regulator-min-microvolt = <1000000>;
>  regulator-max-microvolt = <3000000>;
> };
>
> vaux2: regulator-vaux2 {
>  compatible = "ti,twl6030-vaux2";
>  regulator-min-microvolt = <1200000>;
>  regulator-max-microvolt = <2800000>;
> };
>
> vaux3: regulator-vaux3 {
>  compatible = "ti,twl6030-vaux3";
>  regulator-min-microvolt = <1000000>;
>  regulator-max-microvolt = <3000000>;
> };
>
> vmmc: regulator-vmmc {
>  compatible = "ti,twl6030-vmmc";
>  regulator-min-microvolt = <1200000>;
>  regulator-max-microvolt = <3000000>;
> };
>
> vpp: regulator-vpp {
>  compatible = "ti,twl6030-vpp";
>  regulator-min-microvolt = <1800000>;
>  regulator-max-microvolt = <2500000>;
> };
>
> vusim: regulator-vusim {
>  compatible = "ti,twl6030-vusim";
>  regulator-min-microvolt = <1200000>;
>  regulator-max-microvolt = <2900000>;
> };
>
> vdac: regulator-vdac {
>  compatible = "ti,twl6030-vdac";
> };
>
> vana: regulator-vana {
>  compatible = "ti,twl6030-vana";
> };
>
> vcxio: regulator-vcxio {
>  compatible = "ti,twl6030-vcxio";
>  regulator-always-on;
> };
>
> vusb: regulator-vusb {
>  compatible = "ti,twl6030-vusb";
> };
>
> v1v8: regulator-v1v8 {
>  compatible = "ti,twl6030-v1v8";
>  regulator-always-on;
> };
>
> v2v1: regulator-v2v1 {
>  compatible = "ti,twl6030-v2v1";
>  regulator-always-on;
> };
>
> twl_usb_comparator: usb-comparator {
>  compatible = "ti,twl6030-usb";
>  interrupts = <4>, <10>;
> };
>
> twl_pwm: pwm {
>
>  compatible = "ti,twl6030-pwm";
>  #pwm-cells = <2>;
>
> };
>
> twl_pwmled: pwmled {
>
>  compatible = "ti,twl6030-pwmled";
>  #pwm-cells = <2>;
>
> };
>};
>
>
>
>
>
>
>
>
>&twl {
>
>
>
>
>
>
>
> pinctrl-names = "default";
> pinctrl-0 = <
>  &twl6030_pins
>  &twl6030_wkup_pins
> >;
>};
>
>&omap4_pmx_wkup {
> twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
>  pinctrl-single,pins = <
>   0x14 (0 | 2)
>  >;
> };
>};
>
>&omap4_pmx_core {
> twl6030_pins: pinmux_twl6030_pins {
>  pinctrl-single,pins = <
>   0x15e ((1 << 14) | ((1 << 3) | (1 << 8) | (1 << 4)) | 0)
>  >;
> };
>};
>
>&i2c2 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c2_pins>;
>
> clock-frequency = <400000>;
>};
>
>&i2c3 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c3_pins>;
>
> clock-frequency = <100000>;
>
>
>
>
>
> eeprom@50 {
>  compatible = "ti,eeprom";
>  reg = <0x50>;
> };
>};
>
>&i2c4 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c4_pins>;
>
> clock-frequency = <400000>;
>};
>
>&mmc1 {
> vmmc-supply = <&vmmc>;
> bus-width = <8>;
>};
>
>&mmc2 {
> status = "disabled";
>};
>
>&mmc3 {
> status = "disabled";
>};
>
>&mmc4 {
> status = "disabled";
>};
>
>&mmc5 {
> pinctrl-names = "default";
> pinctrl-0 = <&wl12xx_pins>;
> vmmc-supply = <&wl12xx_vmmc>;
> non-removable;
> bus-width = <4>;
> cap-power-off-card;
>};
>
>&emif1 {
> cs1-used;
> device-handle = <&elpida_ECB240ABACN>;
>};
>
>&emif2 {
> cs1-used;
> device-handle = <&elpida_ECB240ABACN>;
>};
>
>&mcbsp1 {
> pinctrl-names = "default";
> pinctrl-0 = <&mcbsp1_pins>;
> status = "okay";
>};
>
>&mcpdm {
> pinctrl-names = "default";
> pinctrl-0 = <&mcpdm_pins>;
> status = "okay";
>};
>
>&twl_usb_comparator {
> usb-supply = <&vusb>;
>};
>
>&uart2 {
> interrupts-extended = <&gic 0 73 4
>          &omap4_pmx_core 0xdc>;
>};
>
>&uart3 {
> interrupts-extended = <&gic 0 74 4
>          &omap4_pmx_core 0x104>;
>};
>
>&uart4 {
> interrupts-extended = <&gic 0 70 4
>          &omap4_pmx_core 0x11c>;
>};
>
>&usb_otg_hs {
> interface-type = <1>;
> mode = <3>;
> power = <50>;
>};
>
>&usbhshost {
> port1-mode = "ehci-phy";
>};
>
>&usbhsehci {
> phys = <&hsusb1_phy>;
>};
>
>&dss {
> status = "ok";
>
> port {
>  dpi_out: endpoint {
>   remote-endpoint = <&tfp410_in>;
>   data-lines = <24>;
>  };
> };
>};
>
>&dsi2 {
> status = "ok";
> vdd-supply = <&vcxio>;
>};
>
>&hdmi {
> status = "ok";
> vdda-supply = <&vdac>;
>
> port {
>  hdmi_out: endpoint {
>   remote-endpoint = <&tpd12s015_in>;
>  };
> };
>};
>
>/ {
> model = "TI OMAP4 PandaBoard";
> compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
>};
>&mmc1 {
> non-removable;
>};
>
>&mmc5 {
> status = "disabled";
>};
>
>/ {
> ocp {
>  global-timer@48240600 {
>   compatible = "arm,cortex-a9-global-timer";
>   reg = <0x48240200 0x20>;
>   interrupts = <1 11 (((3) << 8) | 4)>;
>  };
> };
> chosen {
>  stdin = "serial2";
>  stdout = "serial2";
> };
>};
>

Actions: View

Attachments on bug 204043: 162478 | 162479 | 164781 | 164782