FreeBSD Bugzilla – Attachment 162511 Details for
Bug 204071
Kernel Panic when trying to setup HOSTAP mode
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
Kernel log
freebsd_hostap_kernel_panic.log (text/x-log), 11.74 KB, created by
Byter
on 2015-10-27 17:35:35 UTC
(
hide
)
Description:
Kernel log
Filename:
MIME Type:
Creator:
Byter
Created:
2015-10-27 17:35:35 UTC
Size:
11.74 KB
patch
obsolete
> >U-Boot 1.1.4-g6452b07f-dirty (Jun 13 2013 - 15:49:24) > >===================================== >CARAMBOLA2 v1.0 (AR9331) U-boot >http://www.8devices.com/ >------------------------------------- >DRAM: 64 MB >Flash: 16 MB >Net: eth0, eth1 >===================================== > >Hit ESC key to stop autoboot: 0 >## Booting image at 9f050000 ... > Image Name: FreeBSD > Created: 2015-10-25 11:15:18 UTC > Image Type: MIPS Linux Kernel Image (lzma compressed) > Data Size: 1347506 Bytes = 1.3 MB > Load Address: 80050000 > Entry Point: 80050100 > Verifying Checksum at 0x9f050040 ...OK > Uncompressing Kernel Image ... OK > >Starting kernel ... > >CPU platform: Atheros AR9330 rev 1 >CPU Frequency=400 MHz >CPU DDR Frequency=400 MHz >CPU AHB Frequency=200 MHz >platform frequency: 400 MHz >CPU reference clock: 40 MHz >CPU MDIO clock: 40 MHz >arguments: > a0 = 00000003 > a1 = a3f7bfb0 > a2 = a3f7c3d0 > a3 = 00000010 >Cmd line:argv is invalid >Environment: >envp is invalid >Cache info: > picache_stride = 4096 > picache_loopcount = 16 > pdcache_stride = 4096 > pdcache_loopcount = 8 >cpu0: MIPS Technologies processor v116.147 > MMU: Standard TLB, 16 entries > L1 i-cache: 4 ways of 512 sets, 32 bytes per line > L1 d-cache: 4 ways of 256 sets, 32 bytes per line > Config1=0x9ee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> > Config3=0x20 >Physical memory chunk(s): >0x516000 - 0x3ffffff, 61775872 bytes (15082 pages) >Maxmem is 0x4000000 >ar933x_configure_gmac: GMAC config was 0x00000010 >ar933x_configure_gmac: GMAC setting is 0x00000000; register is now 0x00000010 >KDB: debugger backends: ddb >KDB: current backend: ddb >Copyright (c) 1992-2015 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 11.0-CURRENT #0 30317d5(master): Sat Oct 24 23:01:33 CEST 2015 > monthadar@pcbsd-3314:/usr/home/monthadar/src/free-wifi/obj/mips_ap/mips.mips/usr/home/monthadar/src/free-wifi/freebsd/sys/CARAMBOLA2 mips >gcc version 4.2.1 20070831 patched [FreeBSD] >Preloaded elf kernel "kernel" at 0x80510110. >real memory = 67108864 (65536K bytes) >Physical memory chunk(s): >0x005aa000 - 0x03eb7fff, 59826176 bytes (14606 pages) >avail memory = 59543552 (56MB) >wlan: <802.11 Link Layer> >random: entropy device external interface >mem: <memory> >null: <full device, null device, zero device> >nexus0: <MIPS32 root nexus> >clock0: <Generic MIPS32 ticker> on nexus0 >Timecounter "MIPS32" frequency 200000000 Hz quality 800 >Event timer "MIPS32" frequency 200000000 Hz quality 800 >random: harvesting attach, 8 bytes (4 bits) from clock0 >argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0 >mdio0: <MDIO> on argemdio0 >mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 >random: harvesting attach, 8 bytes (4 bits) from mdioproxy0 >arswitch0: <Atheros AR7240 Ethernet Switch (ver 0 rev 0)> on mdio0 >miibus0: <MII bus> on arswitch0 >ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 >ukphy0: OUI 0x00c82e, model 0x0004, rev. 1 >ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto >random: harvesting attach, 8 bytes (4 bits) from ukphy0 >random: harvesting attach, 8 bytes (4 bits) from miibus0 >miibus1: <MII bus> on arswitch0 >ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 >ukphy1: OUI 0x00c82e, model 0x0004, rev. 1 >ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto >random: harvesting attach, 8 bytes (4 bits) from ukphy1 >random: harvesting attach, 8 bytes (4 bits) from miibus1 >miibus2: <MII bus> on arswitch0 >ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 >ukphy2: OUI 0x00c82e, model 0x0004, rev. 1 >ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto >random: harvesting attach, 8 bytes (4 bits) from ukphy2 >random: harvesting attach, 8 bytes (4 bits) from miibus2 >miibus3: <MII bus> on arswitch0 >ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 >ukphy3: OUI 0x00c82e, model 0x0004, rev. 1 >ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto >random: harvesting attach, 8 bytes (4 bits) from ukphy3 >random: harvesting attach, 8 bytes (4 bits) from miibus3 >etherswitch0: <Switch controller> on arswitch0 >random: harvesting attach, 8 bytes (4 bits) from etherswitch0 >mdio1: <MDIO> on arswitch0 >mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1 >random: harvesting attach, 8 bytes (4 bits) from mdioproxy1 >random: harvesting attach, 8 bytes (4 bits) from mdio1 >random: harvesting attach, 8 bytes (4 bits) from arswitch0 >random: harvesting attach, 8 bytes (4 bits) from mdio0 >random: harvesting attach, 8 bytes (4 bits) from argemdio0 >apb0 at irq 4 on nexus0 >uart0: <ar933x> at mem 0x18020000-0x18020017 irq 3 on apb0 >uart0: console (115200,n,8,1) >uart0: fast interrupt >uart0: PPS capture mode 2 (DCD) >random: harvesting attach, 8 bytes (4 bits) from uart0 >gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0 >gpio0: [GIANT-LOCKED] >gpio0: function_set: 0x0 >gpio0: function_clear: 0x0 >gpio0: gpio pinmask=0xfc1803 >gpiobus0: <GPIO bus> on gpio0 >random: harvesting attach, 8 bytes (4 bits) from gpiobus0 >gpioc0: <GPIO controller> on gpio0 >random: harvesting attach, 8 bytes (4 bits) from gpioc0 >random: harvesting attach, 8 bytes (4 bits) from gpio0 >random: harvesting attach, 8 bytes (4 bits) from apb0 >ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0 >usbus0: set host controller mode >usbus0: EHCI version 1.0 >usbus0: set host controller mode >usbus0 on ehci0 >ehci0: usbpf: Attached >random: harvesting attach, 8 bytes (4 bits) from usbus0 >random: harvesting attach, 8 bytes (4 bits) from ehci0 >arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0 >arge0: Overriding MAC from EEPROM >miiproxy0: <MII/MDIO proxy, MII side> on arge0 >random: harvesting attach, 8 bytes (4 bits) from miiproxy0 >miiproxy0: attached to target mdio1 >arge0: finishing attachment, phymask 0010, proxy set >miibus4: <MII bus> on miiproxy0 >ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4 >ukphy4: OUI 0x00c82e, model 0x0004, rev. 1 >ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto >random: harvesting attach, 8 bytes (4 bits) from ukphy4 >random: harvesting attach, 8 bytes (4 bits) from miibus4 >arge0: bpf attached >arge0: Ethernet address: c4:93:00:00:23:fe >random: harvesting attach, 8 bytes (4 bits) from arge0 >arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0 >arge1: Overriding MAC from EEPROM >mii_attach_proxy: not attaching, no mdio device hint for arge1 >arge1: finishing attachment, phymask 0000, proxy null >arge1: bpf attached >arge1: Ethernet address: c4:93:00:00:23:fc >random: harvesting attach, 8 bytes (4 bits) from arge1 >ath0: Vendor=0x168c, Device=0x0035 >ath0: Vendor=0x168c, Device=0x0035 >ath0: <Atheros AR933x> at mem 0x18100000-0x1811ffff irq 0 on nexus0 >ath0: eeprom @ 0x1fff0000 (16384 bytes) >ath0: eeprom data @ 0xbfff0000 >Bootstrap clock 40MHz >ar9300_attach: calling ar9300_hw_attach >ar9300_hw_attach: calling ar9300_eeprom_attach >ar9300_flash_map: unimplemented for now >Restoring Cal data from DRAM >ar9300_hw_attach: ar9300_eeprom_attach returned 0 >ath0: RX status length: 48 >ath0: RX buffer size: 4096 >ath0: TX descriptor length: 128 >ath0: TX status length: 36 >ath0: TX buffers per descriptor: 4 >ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries >ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries >ath0: [HT] enabling HT modes >ath0: [HT] enabling short-GI in 20MHz mode >ath0: [HT] 1 stream STBC receive enabled >ath0: [HT] 1 RX streams; 1 TX streams >ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps >ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps >ath0: 1T1R >ath0: 11ng MCS 20MHz >ath0: MCS 0-7: 6.5Mbps - 65Mbps >ath0: 11ng MCS 20MHz SGI >ath0: MCS 0-7: 7Mbps - 72Mbps >ath0: 11ng MCS 40MHz: >ath0: MCS 0-7: 13.5Mbps - 135Mbps >ath0: 11ng MCS 40MHz SGI: >ath0: MCS 0-7: 15Mbps - 150Mbps >ath0: AR9330 mac 512.1 RF5110 phy 0.0 >ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 >ath0: Use hw queue 1 for WME_AC_BE traffic >ath0: Use hw queue 0 for WME_AC_BK traffic >ath0: Use hw queue 2 for WME_AC_VI traffic >ath0: Use hw queue 3 for WME_AC_VO traffic >ath0: Use hw queue 8 for CAB traffic >ath0: Use hw queue 9 for beacons >ath0: using multicast key search >random: harvesting attach, 8 bytes (4 bits) from ath0 >spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 >spibus0: <spibus bus> on spi0 >mx25l0: <M25Pxx Flash Family> at cs 0 on spibus0 >mx25l0: w25q128, sector 65536 bytes, 256 sectors >random: harvesting attach, 8 bytes (4 bits) from mx25l0 >random: harvesting attach, 8 bytes (4 bits) from spibus0 >random: harvesting attach, 8 bytes (4 bits) from spi0 >ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 >random: harvesting attach, 8 bytes (4 bits) from ar71xx_wdog0 >random: harvesting attach, 8 bytes (4 bits) from nexus0 >Device configuration finished. >Timecounters tick every 1.000 msec >tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024 >lo0: bpf attached >arswitch0port1: link state changed to DOWN >arswitch0port2: link state changed to DOWN >arswitch0port3: link state changed to DOWN >arswitch0port4: link state changed to DOWN >GEOM: new disk flash/spi0 >usbus0: 480Mbps High Speed USB v2.0 >MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/uboot" >MAP: flash/spi0: 40000x10000, data=0x10000 "/dev/map/uboot-env" >MAP: search flash/spi0 for key ".!/bin/sh" from 0x50000, step 0x10000 >ugen0.1: <Atheros> at usbus0 >uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 >MAP: flash/spi0: 50000x150000, data=0x150000 "/dev/map/kernel" >MAP: search flash/spi0 for key ".!/bin/sh" from 0x50000, step 0x10000 >MAP: flash/spi0: 1a0000xe40000, data=0xe40000 "/dev/map/rootfs" >MAP: flash/spi0: fe0000x10000, data=0x10000 "/dev/map/cfg" >MAP: flash/spi0: ff0000x10000, data=0x10000 "/dev/map/art" >MAP: No valid partition found at map/rootfs.uncompress >Root mount waiting for: usbus0 >uhub0: 1 port with 1 removable, self powered >random: harvesting attach, 8 bytes (4 bits) from uhub0 >Trying to mount root from ufs:map/rootfs.uncompress []... >arswitch0: arswitch_miipollstat: port 1: port -> UP >arswitch0port2: link state changed to UP >warning: no time-of-day clock registered, system time will not be set accurately >start_init: trying /sbin/init >Oct 25 11:15:02 init: login_getclass: unknown class 'daemon' >MAP: No valid partition found at md0 >random: unblocking device. >MAP: No valid partition found at md0 >MAP: No valid partition found at md1 >MAP: No valid partition found at md1 >MAP: No valid partition found at md2 >MAP: No valid partition found at md2 >*** Populating /var .. >*** Loading configuration files .. >*** Restoring from /dev/map/cfg .. >gunzip: unknown compression format >1+0 records in >1+0 records out >0 blocks >65536 bytes transferred in 7.128694 secs (9193 bytes/sec) >*** Completed. >*** setting up hostname >*** Load kernel modules > .. bridgestp >kldload: can't load bridgestp: module already loaded or in kernel > .. if_bridge >kldload: can't load if_bridge: No such file or directory > .. random >kldload: can't load random: No such file or directory >*** Setting kern.random.harvest.mask=511 >kern.random.harvest.mask: 2047 -> 511 >*** bringing up loopback .. >*** Default password/login databases .. >*** Starting networking via /etc/rc.d/base/net >*** Interface: arge1: start >*** Interface: arge1: done >*** Interface: bridge0: start >bridge0: bpf attached >bridge0: Ethernet address: 0a:94:d9:10:32:af >arge1: promiscuous mode enabled >bridge0: link state changed to UP >*** Interface: bridge0: done >*** inetd >*** Done! > >FreeBSD/mips (freebsd-carambola2) (ttyu0) > >login:
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 204071
: 162511