Attachment 162709 Details for Bug 204226 – sas2ircu full device output

sas2ircu full device output

sas2ircu.txt (text/plain), 7.19 KB, created by Daniel Ylitalo on 2015-11-02 14:51:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Ylitalo

Created: 2015-11-02 14:51:36 UTC

Size: 7.19 KB

patch

obsolete

>[root@storage-01-portlane ~]# ./utils/tools/lsi/mps/sas2ircu 0 DISPLAY
>LSI Corporation SAS2 IR Configuration Utility.
>Version 20.00.00.00 (2014.09.18)
>Copyright (c) 2008-2014 LSI Corporation. All rights reserved.
>
>Read configuration has been initiated for controller 0
>------------------------------------------------------------------------
>Controller information
>------------------------------------------------------------------------
>  Controller type                         : SAS2308_2
>  BIOS version                            : 7.39.00.00
>  Firmware version                        : 20.00.04.00
>  Channel description                     : 1 Serial Attached SCSI
>  Initiator ID                            : 0
>  Maximum physical devices                : 255
>  Concurrent commands supported           : 3072
>  Slot                                    : 10
>  Segment                                 : 0
>  Bus                                     : 4
>  Device                                  : 0
>  Function                                : 0
>  RAID Support                            : Yes
>------------------------------------------------------------------------
>IR Volume information
>------------------------------------------------------------------------
>IR volume 1
>  Volume ID                               : 286
>  Status of volume                        : Okay (OKY)
>  Volume wwid                             : 0b064d34e2e1e90a
>  RAID level                              : RAID1
>  Size (in MB)                            : 113487
>  Physical hard disks                     :
>  PHY[0] Enclosure#/Slot#                 : 1:5
>  PHY[1] Enclosure#/Slot#                 : 1:4
>------------------------------------------------------------------------
>Physical device information
>------------------------------------------------------------------------
>Initiator at ID #0
>
>Device is a Hard disk
>  Enclosure #                             : 1
>  Slot #                                  : 4
>  SAS Address                             : 4433221-1-0700-0000
>  State                                   : Optimal (OPT)
>  Size (in MB)/(in sectors)               : 114473/234441647
>  Manufacturer                            : ATA
>  Model Number                            : SAMSUNG MZ7KM120
>  Firmware Revision                       : 003Q
>  Serial No                               : S2HPNYAG800016
>  GUID                                    : 5002538c00052eb8
>  Protocol                                : SATA
>  Drive Type                              : SATA_SSD
>
>Device is a Hard disk
>  Enclosure #                             : 1
>  Slot #                                  : 5
>  SAS Address                             : 4433221-1-0600-0000
>  State                                   : Optimal (OPT)
>  Size (in MB)/(in sectors)               : 114473/234441647
>  Manufacturer                            : ATA
>  Model Number                            : SAMSUNG MZ7KM120
>  Firmware Revision                       : 003Q
>  Serial No                               : S2HPNYAG800091
>  GUID                                    : 5002538c00052f03
>  Protocol                                : SATA
>  Drive Type                              : SATA_SSD
>
>Device is a Hard disk
>  Enclosure #                             : 2
>  Slot #                                  : 0
>  SAS Address                             : 5003048-0-178b-32ac
>  State                                   : Ready (RDY)
>  Size (in MB)/(in sectors)               : 3815447/7814037167
>  Manufacturer                            : ATA
>  Model Number                            : ST4000NM0033-9ZM
>  Firmware Revision                       : SN04
>  Serial No                               : Z1Z74M2J
>  GUID                                    : N/A
>  Protocol                                : SATA
>  Drive Type                              : SATA_HDD
>
>Device is a Enclosure services device
>  Enclosure #                             : 2
>  Slot #                                  : 0
>  SAS Address                             : 5003048-0-178b-32bd
>  State                                   : Standby (SBY)
>  Manufacturer                            : LSI
>  Model Number                            : SAS2X28
>  Firmware Revision                       : 0e12
>  Serial No                               : x365514180
>  GUID                                    : N/A
>  Protocol                                : SAS
>  Device Type                             : Enclosure services device
>
>Device is a Hard disk
>  Enclosure #                             : 2
>  Slot #                                  : 1
>  SAS Address                             : 5003048-0-178b-32ad
>  State                                   : Ready (RDY)
>  Size (in MB)/(in sectors)               : 3815447/7814037167
>  Manufacturer                            : ATA
>  Model Number                            : ST4000NM0033-9ZM
>  Firmware Revision                       : SN04
>  Serial No                               : Z1Z7XAC6
>  GUID                                    : N/A
>  Protocol                                : SATA
>  Drive Type                              : SATA_HDD
>
>Device is a Hard disk
>  Enclosure #                             : 2
>  Slot #                                  : 2
>  SAS Address                             : 5003048-0-178b-32ae
>  State                                   : Ready (RDY)
>  Size (in MB)/(in sectors)               : 3815447/7814037167
>  Manufacturer                            : ATA
>  Model Number                            : ST4000NM0033-9ZM
>  Firmware Revision                       : SN04
>  Serial No                               : Z1Z6M8FW
>  GUID                                    : N/A
>  Protocol                                : SATA
>  Drive Type                              : SATA_HDD
>
>Device is a Hard disk
>  Enclosure #                             : 2
>  Slot #                                  : 3
>  SAS Address                             : 5003048-0-178b-32af
>  State                                   : Ready (RDY)
>  Size (in MB)/(in sectors)               : 3815447/7814037167
>  Manufacturer                            : ATA
>  Model Number                            : ST4000NM0033-9ZM
>  Firmware Revision                       : SN04
>  Serial No                               : Z1Z7QJCL
>  GUID                                    : N/A
>  Protocol                                : SATA
>  Drive Type                              : SATA_HDD
>------------------------------------------------------------------------
>Enclosure information
>------------------------------------------------------------------------
>  Enclosure#                              : 1
>  Logical ID                              : 500605b0:0a9c8ab0
>  Numslots                                : 8
>  StartSlot                               : 0
>  Enclosure#                              : 2
>  Logical ID                              : 50030480:178b32bf
>  Numslots                                : 13
>  StartSlot                               : 0
>------------------------------------------------------------------------
>SAS2IRCU: Command DISPLAY Completed Successfully.
>SAS2IRCU: Utility Completed Successfully.

Actions: View

Attachments on bug 204226: 162708 | 162709