FreeBSD Bugzilla – Attachment 176867 Details for
Bug 214406
[urtwn] discard frame, too short - flakey performance - sometimes not even dhclient succeeds
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
service_netif_restart.log
file_214406.txt (text/plain), 4.63 KB, created by
Dave Cottlehuber
on 2016-11-10 18:55:09 UTC
(
hide
)
Description:
service_netif_restart.log
Filename:
MIME Type:
Creator:
Dave Cottlehuber
Created:
2016-11-10 18:55:09 UTC
Size:
4.63 KB
patch
obsolete
>net.wlan.0.debug: 0xffffffff<11n,debug,dumppkts,crypto,input,xrate,elemid,node,assoc,auth,scan,output,state,power,hwmp,dot1xsm,radius,raddump,mesh,wpa,acl,wme,superg,doth,inact,roam,rate,action,wds,ioctl,tdma> >net.wlan.0.debug: 0xffffffff<11n,debug,dumppkts,crypto,input,xrate,elemid,node,assoc,auth,scan,output,state,power,hwmp,dot1xsm,radius,raddump,mesh,wpa,acl,wme,superg,doth,inact,roam,rate,action,wds,ioctl,tdma> >/etc/rc.d/netif: DEBUG: checkyesno: netif_enable is set to YES. >/etc/rc.d/netif: DEBUG: checkyesno: netif_enable is set to YES. >/etc/rc.d/netif: DEBUG: run_rc_command: doit: netif_stop >/etc/rc.d/netif: DEBUG: checkyesno: ipv6_gateway_enable is set to NO. >net.wlan.0.debug: 0xffffffff<11n,debug,dumppkts,crypto,input,xrate,elemid,node,assoc,auth,scan,output,state,power,hwmp,dot1xsm,radius,raddump,mesh,wpa,acl,wme,superg,doth,inact,roam,rate,action,wds,ioctl,tdma> >Stopping wpa_supplicant. >/etc/rc.d/wpa_supplicant: DEBUG: run_rc_command: doit: kill -TERM 6225 >Waiting for PIDS: 6225. >net.wlan.0.debug: 0xffffffff<11n,debug,dumppkts,crypto,input,xrate,elemid,node,assoc,auth,scan,output,state,power,hwmp,dot1xsm,radius,raddump,mesh,wpa,acl,wme,superg,doth,inact,roam,rate,action,wds,ioctl,tdma> >dhclient not running? (check /var/run/dhclient.wlan0.pid). >Stopping Network: lo0 wlan0. >lo0: flags=8048<LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > groups: lo >wlan0: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 74:da:38:7e:e6:e0 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid "" channel 6 (2437 MHz 11g) > regdomain FCC country US authmode OPEN privacy OFF txpower 30 bmiss 7 > scanvalid 60 protmode CTS wme > groups: wlan >/etc/rc.d/netif: DEBUG: The following interfaces were not configured: >Destroyed wlan(4) interfaces: wlan0. >/etc/rc.d/netif: DEBUG: Destroyed wlan(4)s: wlan0 >/etc/rc.d/netif: DEBUG: checkyesno: cloned_interfaces_sticky is set to NO. >/etc/rc.d/netif: DEBUG: Destroyed clones: >/etc/rc.d/netif: DEBUG: checkyesno: netif_enable is set to YES. >/etc/rc.d/netif: DEBUG: run_rc_command: doit: netif_start >Created wlan(4) interfaces: wlan0. >/etc/rc.d/netif: DEBUG: Created wlan(4)s: wlan0 >/etc/rc.d/netif: DEBUG: Cloned: >/etc/rc.d/netif: DEBUG: checkyesno: ipv6_activate_all_interfaces is set to NO. >/etc/rc.d/netif: DEBUG: checkyesno: ipv6_activate_all_interfaces is set to NO. >net.wlan.0.debug: 0x0 => 0xffffffff<11n,debug,dumppkts,crypto,input,xrate,elemid,node,assoc,auth,scan,output,state,power,hwmp,dot1xsm,radius,raddump,mesh,wpa,acl,wme,superg,doth,inact,roam,rate,action,wds,ioctl,tdma> >/etc/rc.d/wpa_supplicant: DEBUG: pid file (/var/run/wpa_supplicant/wlan0.pid): not readable. >/etc/rc.d/wpa_supplicant: DEBUG: load_kld: wlan_wep kernel module already loaded. >/etc/rc.d/wpa_supplicant: DEBUG: load_kld: wlan_tkip kernel module already loaded. >/etc/rc.d/wpa_supplicant: DEBUG: load_kld: wlan_ccmp kernel module already loaded. >Starting wpa_supplicant. >/etc/rc.d/wpa_supplicant: DEBUG: run_rc_command: doit: limits -C daemon /usr/sbin/wpa_supplicant -s -B -i wlan0 -c /etc/wpa_supplicant.conf -D bsd -P /var/run/wpa_supplicant/wlan0.pid >/etc/rc.d/netif: DEBUG: checkyesno: synchronous_dhclient is set to NO. >/etc/rc.d/netif: DEBUG: checkyesno: ipv6_gateway_enable is set to NO. >/etc/rc.d/netif: DEBUG: checkyesno: rtsold_enable is set to NO. >Starting Network: lo0 wlan0. >lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > inet 127.0.0.1 netmask 0xff000000 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > groups: lo >wlan0: flags=8d43<UP,BROADCAST,RUNNING,PROMISC,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 74:da:38:7e:e6:e0 > inet6 fe80::76da:38ff:fe7e:e6e0%wlan0 prefixlen 64 scopeid 0x2 > nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid "" channel 7 (2442 MHz 11g) > regdomain FCC country US authmode WPA1+WPA2/802.11i privacy ON > deftxkey UNDEF txpower 30 bmiss 7 scanvalid 60 protmode CTS wme > roaming MANUAL > groups: wlan >/etc/rc.d/netif: DEBUG: The following interfaces were not configured: >net.wlan.0.debug: 0xffffffff<11n,debug,dumppkts,crypto,input,xrate,elemid,node,assoc,auth,scan,output,state,power,hwmp,dot1xsm,radius,raddump,mesh,wpa,acl,wme,superg,doth,inact,roam,rate,action,wds,ioctl,tdma> >/etc/rc.d/ipfilter: DEBUG: checkyesno: ipfilter_enable is set to NO.
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 214406
:
176865
| 176867 |
176868