Attachment 182688 Details for Bug 219372 – dmesg of 9.3 kernel - not worked

dmesg of 9.3 kernel - not worked

dmesg.93.txt (text/plain), 8.72 KB, created by oklaspec on 2017-05-18 09:11:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: oklaspec

Created: 2017-05-18 09:11:15 UTC

Size: 8.72 KB

patch

obsolete

>ï»¿Copyright (c) 1992-2014 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 9.3-RELEASE #0 r318280: Mon May 15 05:20:47 MSD 2017
>    root@ns3.domain:/usr/home/obj93/usr/home/src93/sys/BSDKERNEL amd64
>gcc version 4.2.1 20070831 patched [FreeBSD]
>CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2009.30-MHz K8-class CPU)
>  Origin = "AuthenticAMD"  Id = 0x40fb2  Family = 0xf  Model = 0x4b  Stepping = 2
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x2001<SSE3,CX16>
>  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
>  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
>real memory  = 2147483648 (2048 MB)
>avail memory = 1911095296 (1822 MB)
>Event timer "LAPIC" quality 400
>ACPI APIC Table: <A_M_I_ OEMAPIC >
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 2 core(s)
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
>ioapic0 <Version 1.1> irqs 0-23 on motherboard
>kbd1 at kbdmux0
>acpi0: <A_M_I_ OEMXSDT> on motherboard
>acpi0: Power Button (fixed)
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, 77f00000 (3) failed
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>attimer0: Can't map interrupt.
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff on acpi0
>Timecounter "HPET" frequency 25000000 Hz quality 950
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <memory, RAM> at device 0.0 (no driver attached)
>isab0: <PCI-ISA bridge> port 0x900-0x9ff at device 1.0 on pci0
>isa0: <ISA bus> on isab0
>pci0: <memory, RAM> at device 1.2 (no driver attached)
>ohci0: <nVidia nForce MCP61 USB Controller> mem 0xdfeff000-0xdfefffff irq 21 at device 2.0 on pci0
>usbus0 on ohci0
>ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xdfefec00-0xdfefecff irq 22 at device 2.1 on pci0
>usbus1: EHCI version 1.0
>usbus1 on ehci0
>pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe800-0xe8ff mem 0xdffffc00-0xdffffcff irq 16 at device 7.0 on pci1
>vr0: Quirks: 0x0
>vr0: Revision: 0x8b
>miibus0: <MII bus> on vr0
>ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>vr0: Ethernet address: 5c:d9:98:f8:f4:9c
>hdac0: <NVIDIA MCP61 HDA Controller> mem 0xdfef8000-0xdfefbfff irq 23 at device 5.0 on pci0
>nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xd480-0xd487 mem 0xdfefd000-0xdfefdfff irq 20 at device 7.0 on pci0
>miibus1: <MII bus> on nfe0
>atphy0: <Atheros F1 10/100/1000 PHY> PHY 1 on miibus1
>atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>nfe0: Ethernet address: 00:18:f3:86:fd:dd
>atapci0: <nVidia nForce MCP61 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f mem 0xdfefc000-0xdfefcfff irq 21 at device 8.0 on pci0
>ata2: <ATA channel> at channel 0 on atapci0
>ata3: <ATA channel> at channel 1 on atapci0
>atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xc800-0xc807,0xc480-0xc483,0xc400-0xc407,0xc080-0xc083,0xc000-0xc00f mem 0xdfef3000-0xdfef3fff irq 22 at device 8.1 on pci0
>ata4: <ATA channel> at channel 0 on atapci1
>ata5: <ATA channel> at channel 1 on atapci1
>pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xdd000000-0xddffffff irq 23 at device 13.0 on pci0
>vgapci0: Boot video device
>acpi_button0: <Power Button> on acpi0
>fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>ppc0: cannot reserve I/O port range
>powernow0: <PowerNow! K8> on cpu0
>powernow1: <PowerNow! K8> on cpu1
>Timecounters tick every 1.000 msec
>ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to deny, logging disabled
>hdacc0: <Analog Devices AD1986A HDA CODEC> at cad 0 on hdac0
>hdaa0: <Analog Devices AD1986A Audio Function Group> at nid 1 on hdacc0
>hdaa0: WARNING: nid=18 has zero cnid entnum=4 j=2 index=0 entries=8 found=2 res=0x21002211
>pcm0: <Analog Devices AD1986A (Analog 6ch/2.0)> at nid 27,28,29 and 31 on hdaa0
>pcm1: <Analog Devices AD1986A (Rear Digital)> at nid 37 on hdaa0
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 480Mbps High Speed USB v2.0
>ugen0.1: <nVidia> at usbus0
>uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <nVidia> at usbus1
>uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>uhub0: 10 ports with 10 removable, self powered
>ada0 at ata2 bus 0 scbus0 target 0 lun 0
>ada0: <WDC WD7501AALS-00J7B0 05.00K05> ATA-8 SATA 2.x device
>ada0: Serial Number WD-WMATW0040163
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
>ada0: Previously was known as ad4
>ada1 at ata3 bus 0 scbus1 target 0 lun 0
>ada1: <WDC WD3200AAKS-00L9A0 01.03E01> ATA-8 SATA 2.x device
>ada1: Serial Number WD-WMAV27361650
>ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>ada1: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
>ada1: Previously was known as ad6
>ada2 at ata5 bus 0 scbus3 target 0 lun 0
>ada2: <WDC WD3200AAKS-00L9A0 01.03E01> ATA-8 SATA 2.x device
>ada2: Serial Number WD-WMAV27753872
>ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
>ada2: Previously was known as ad10
>SMP: AP CPU #1 Launched!
>GEOM_RAID: Promise: Array Promise created.
>Root mount waiting for: GRAID usbus1
>Root mount waiting for: GRAID usbus1
>Root mount waiting for: GRAID usbus1
>uhub1: 10 ports with 10 removable, self powered
>Root mount waiting for: GRAID
>ugen0.2: <Seagate> at usbus0
>umass0: <Seagate Backup+  BL, class 0/0, rev 2.10/1.43, addr 2> on usbus0
>umass0:  SCSI over Bulk-Only; quirks = 0x0100
>umass0:4:0:-1: Attached to scbus4
>da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
>da0: <Seagate Backup+  BL 0143> Fixed Direct Access SCSI-6 device 
>da0: Serial Number NA769W41
>da0: 1.000MB/s transfers
>da0: 1907729MB (3907029167 512 byte sectors: 255H 63S/T 243201C)
>da0: quirks=0x2<NO_6_BYTE>
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>Root mount waiting for: GRAID
>GEOM_RAID: Promise: Force volume start due to timeout.
>GEOM_RAID: Promise: Disk ada1 state changed from NONE to ACTIVE.
>GEOM_RAID: Promise: Subdisk RAID 0   LD  1:1-ada1 state changed from NONE to STALE.
>GEOM_RAID: Promise: Disk ada2 state changed from NONE to ACTIVE.
>GEOM_RAID: Promise: Subdisk RAID 0   LD  1:1-ada2 state changed from STALE to ACTIVE.
>GEOM_RAID: Promise: Volume started.
>GEOM_RAID: Promise: Volume RAID 0   LD  1 state changed from STARTING to BROKEN.
>Trying to mount root from ufs:/dev/ad4s1a [rw]...
>ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
>            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>tap0: Ethernet address: 00:bd:84:99:00:00
>tap0: link state changed to UP
>nfe0: link state changed to UP
>tap0: link state changed to DOWN

Actions: View

Attachments on bug 219372: 182686 | 182687 | 182688