FreeBSD Bugzilla – Attachment 188488 Details for
Bug 224050
RPI-B: 11-STABLE cannot mount root
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
11-STABLE boot log
kernel.txt (text/plain), 6.70 KB, created by
Helge Oldach
on 2017-12-03 10:15:26 UTC
(
hide
)
Description:
11-STABLE boot log
Filename:
MIME Type:
Creator:
Helge Oldach
Created:
2017-12-03 10:15:26 UTC
Size:
6.70 KB
patch
obsolete
>U-Boot 2017.09 (Nov 30 2017 - 10:08:57 +0000) > >DRAM: 448 MiB >No arch specific invalidate_icache_all available! >RPI Model B+ (0x10) >MMC: sdhci@7e300000: 0 >reading uboot.env > >** Unable to read "uboot.env" from mmc0:1 ** >Using default environment > >In: serial >Out: vidconsole >Err: vidconsole >Net: No ethernet found. >starting USB... >USB0: Core Release: 2.80a >scanning bus 0 for devices... Timeout poll on interrupt endpoint >Failed to get keyboard state from device 04d9:a067 >5 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found >Hit any key to stop autoboot: 0 >switch to partitions #0, OK >mmc0 is current device >Scanning mmc 0:1... >Found FreeBSD U-Boot Loader (bin) >reading ubldr.bin >234640 bytes read in 48 ms (4.7 MiB/s) >## Starting application at 0x01000000 ... >No arch specific invalidate_icache_all available! >Consoles: U-Boot console >Compatible U-Boot API signature found @0x1bb5b988 > >FreeBSD/armv6 U-Boot loader, Revision 1.2 >(Thu Nov 30 10:26:17 UTC 2017 root@releng2.nyi.freebsd.org) > >DRAM: 448MB >Number of U-Boot devices: 1 >U-Boot env: loaderdev not set, will probe all devices. >Found U-Boot device: disk > Probing all disk devices... > Checking unit=0 slice=<auto> partition=<auto>... good. >Booting from disk0s2a: >/boot/kernel/kernel data=0x655968+0x17a698 syms=[0x4+0xa5b60+0x4+0x93978] > >Hit [Enter] to boot immediately, or any other key for command prompt. >Booting [/boot/kernel/kernel]... >Using DTB provided by U-Boot at address 0x100. >Kernel entry at 0x1200100... >No arch specific invalidate_icache_all available! >Kernel args: (null) >Copyright (c) 1992-2017 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 11.1-STABLE #0 r326381: Thu Nov 30 10:32:15 UTC 2017 > root@releng2.nyi.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/RPI-B arm >FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM 5.0.0svn) >VT: init without driver. >CPU: ARM ARM1176 r0p7 (ECO: 0x00000000) >CPU Features: > Thumb, Security, VMSAv7 >Optional instructions: > UMULL, SMULL, MLA, SIMD(ext) > 16KB/32B 4-way instruction cache > 16KB/32B 4-way WB data cache >real memory = 469757952 (447 MB) >avail memory = 448143360 (427 MB) >random: entropy device external interface >kbd0 at kbdmux0 >ofwbus0: <Open Firmware Device Tree> >simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on ofwbus0 >intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0 >cpulist0: <Open Firmware CPU Group> on ofwbus0 >cpu0: <Open Firmware CPU> on cpulist0 >bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 >systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 0,1,2,3 on simplebus0 >Event timer "BCM2835-3" frequency 1000000 Hz quality 1000 >Timecounter "BCM2835-3" frequency 1000000 Hz quality 1000 >bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0 >gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 5,6,7,8 on simplebus0 >gpio0: read-only pins: 46-53. >gpio0: reserved pins: 48-53. >gpiobus0: <OFW GPIO bus> on gpio0 >gpioc0: <GPIO controller> on gpio0 >iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 9 on simplebus0 >iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 10 on simplebus0 >spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 11 on simplebus0 >spibus0: <OFW SPI bus> on spi0 >bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 12,13,14,15,16,17,18,19,20,21,22,23,24 on simplebus0 >mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 25 on simplebus0 >sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 26 on simplebus0 >uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 27 on simplebus0 >uart0: console (115200,n,8,1) >vchiq0: <BCM2835 VCHIQ> mem 0xb800-0xb84f irq 28 on simplebus0 >vchiq: local ver 8 (min 3), remote ver 8. >pcm0: <VCHIQ audio> on vchiq0 >bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x980000-0x99ffff irq 29 on simplebus0 >usbus0 on bcm283x_dwcotg0 >fb0: <BCM2835 VT framebuffer driver> on ofwbus0 >fbd0 on fb0 >VT: initialize with new VT driver "fb". >fb0: 1824x984(1824x984@0,0) 24bpp >fb0: fbswap: 1, pitch 5472, base 0x1e6cd000, screen_size 5428224 >gpioled0: <GPIO LEDs> on ofwbus0 >cryptosoft0: <software crypto> >Timecounters tick every 1.000 msec >usbus0: 480Mbps High Speed USB v2.0 >bcm2835_cpufreq0: ARM 700MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF >ugen0.1: <DWCOTG OTG Root HUB> at usbus0 >uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 >iicbus0: <OFW I2C bus> on iichb0 >iic0: <I2C generic I/O> on iicbus0 >iicbus1: <OFW I2C bus> on iichb1 >iic1: <I2C generic I/O> on iicbus1 >uhub0: 1 port with 1 removable, self powered >Trying to mount root from ufs:/dev/ufs/rootfs [rw]... >Root mount waiting for: usbus0 >ugen0.2: <vendor 0x0424 product 0x9514> at usbus0 >uhub1 on uhub0 >uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0 >uhub1: MTT enabled >Root mount waiting for: usbus0 >uhub1: 5 ports with 4 removable, self powered >Root mount waiting for: usbus0 >ugen0.3: <vendor 0x0424 product 0xec00> at usbus0 >smsc0 on uhub1 >smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0 >smsc0: chip 0xec00, rev. 0002 >miibus0: <MII bus> on smsc0 >ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 >ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >ue0: <USB Ethernet> on smsc0 >ue0: Ethernet address: b8:27:eb:44:f2:05 >ugen0.4: <vendor 0x0bda product 0x8176> at usbus0 >Root mount waiting for: usbus0 >ugen0.5: <DELL Dell USB Entry Keyboard> at usbus0 >ukbd0 on uhub1 >ukbd0: <DELL Dell USB Entry Keyboard, class 0/0, rev 1.10/1.78, addr 5> on usbus0 >kbd1 at ukbd0 >Root mount waiting for: usbus0 >ugen0.6: <Holtek USB Gaming Mouse> at usbus0 >ukbd1 on uhub1 >ukbd1: <Holtek USB Gaming Mouse, class 0/0, rev 2.00/1.16, addr 6> on usbus0 >kbd2 at ukbd1 >mountroot: waiting for device /dev/ufs/rootfs... >Mounting from ufs:/dev/ufs/rootfs failed with error 19. > >Loader variables: > vfs.root.mountfrom=ufs:/dev/ufs/rootfs > vfs.root.mountfrom.options=rw > >Manual root filesystem specification: > <fstype>:<device> [options] > Mount <device> using filesystem <fstype> > and with the specified (optional) option list. > > eg. ufs:/dev/da0s1a > zfs:tank > cd9660:/dev/cd0 ro > (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) > > ? List valid disk boot devices > . Yield 1 second (for background tasks) > <empty line> Abort manual input > >mountroot>
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 224050
: 188488