FreeBSD Bugzilla – Attachment 190196 Details for
Bug 225535
Delays in TCP connection over Gigabit Ethernet connections; Regression from 6.3-RELEASE
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
dmesg from verbose boot of Moxa DA-820
dmesg.txt (text/plain), 46.22 KB, created by
Aleksander Derevianko
on 2018-01-30 12:33:42 UTC
(
hide
)
Description:
dmesg from verbose boot of Moxa DA-820
Filename:
MIME Type:
Creator:
Aleksander Derevianko
Created:
2018-01-30 12:33:42 UTC
Size:
46.22 KB
patch
obsolete
>MP Configuration Table version 1.4 found at 0xc00e97a0 >Table 'FACP' at 0xaaffa000 >Table 'TCPA' at 0xaaffd000 >Table 'UEFI' at 0xaaffc000 >Table 'HPET' at 0xaaff9000 >Table 'APIC' at 0xaaff8000 >APIC: Found table at 0xaaff8000 >APIC: Using the MADT enumerator. >MADT: Found CPU APIC ID 0 ACPI ID 1: enabled >SMP: Added CPU 0 (AP) >MADT: Found CPU APIC ID 1 ACPI ID 2: enabled >SMP: Added CPU 1 (AP) >MADT: Found CPU APIC ID 2 ACPI ID 3: enabled >SMP: Added CPU 2 (AP) >MADT: Found CPU APIC ID 3 ACPI ID 4: enabled >SMP: Added CPU 3 (AP) >MADT: Found CPU APIC ID 0 ACPI ID 5: disabled >MADT: Found CPU APIC ID 0 ACPI ID 6: disabled >MADT: Found CPU APIC ID 0 ACPI ID 7: disabled >MADT: Found CPU APIC ID 0 ACPI ID 8: disabled >Copyright (c) 1992-2016 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 03:51:29 UTC 2016 > root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386 >FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 >Preloaded elf kernel "/boot/kernel/kernel" at 0xc1811000. >Preloaded elf module "/boot/kernel/coretemp.ko" at 0xc181196c. >Calibrating TSC clock ... TSC clock: 2494389540 Hz >CPU: Intel(R) Core(TM) i7-3555LE CPU @ 2.50GHz (2494.39-MHz 686-class CPU) > Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> > AMD Features=0x28100000<NX,RDTSCP,LM> > AMD Features2=0x1<LAHF> > Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> > XSAVE Features=0x1<XSAVEOPT> > VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE> > Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr> > Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE> > Secondary Processor Controls=0x8ff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,RDRAND> > Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV> > Entry Controls=0xda0400 > EPT Features=0x6114141<XO,PW4,UC,WB,2M,INVEPT,single,all> > VPID Features=0xf01<INVVPID,individual,single,all,single-globals> > TSC: P-state invariant, performance statistics >Data TLB0: 2-MByte or 4 MByte pages, 4-way set associative, 32 entries >Data TLB: 4 KB pages, 4-way set associative, 64 entries >Instruction TLB: 2M/4M pages, fully associative, 8 entries >Instruction TLB: 4KByte pages, 4-way set associative, 64 entries >64-Byte prefetching >Shared 2nd-Level TLB: 4 KByte pages, 4-way associative, 512 entries >L2 cache: 256 kbytes, 8-way associative, 64 bytes/line >real memory = 4294967296 (4096 MB) >Physical memory chunk(s): >0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) >0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) >0x0000000001c28000 - 0x000000001fffffff, 507346944 bytes (123864 pages) >0x0000000020200000 - 0x0000000040003fff, 534790144 bytes (130564 pages) >0x0000000040005000 - 0x00000000a7cf3fff, 1741615104 bytes (425199 pages) >avail memory = 2783072256 (2654 MB) >Event timer "LAPIC" quality 600 >ACPI APIC Table: <INSYDE CR CRB > >INTR: Adding local APIC 1 as a target >INTR: Adding local APIC 2 as a target >INTR: Adding local APIC 3 as a target >FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 >APIC: CPU 0 has ACPI ID 1 >APIC: CPU 1 has ACPI ID 2 >APIC: CPU 2 has ACPI ID 3 >APIC: CPU 3 has ACPI ID 4 >lapic0: CMCI unmasked >XEN: CPU 0 has VCPU ID 1 >XEN: CPU 1 has VCPU ID 2 >XEN: CPU 2 has VCPU ID 3 >XEN: CPU 3 has VCPU ID 4 >bios32: Found BIOS32 Service Directory header at 0xc00fe140 >bios32: Entry = 0xef725 (c00ef725) Rev = 0 Len = 1 >pcibios: PCI BIOS entry at 0xef220+0x533 >pnpbios: Found PnP BIOS data at 0xc00fe0f0 >pnpbios: Entry = f0000:b772 Rev = 1.0 >pnpbios: OEM ID 8224744e >Other BIOS signatures found: >Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present >Falling back to <Software, Yarrow> random adaptor >random: <Software, Yarrow> initialized >ULE: setup cpu 0 >ULE: setup cpu 1 >ULE: setup cpu 2 >ULE: setup cpu 3 >ACPI: RSDP 0x00000000000FE020 000024 (v02 INSYDE) >ACPI: XSDT 0x00000000AAFFE210 0000A4 (v01 INSYDE CR CRB 00000001 01000013) >ACPI: FACP 0x00000000AAFFA000 00010C (v05 INSYDE CR CRB 00000001 ACPI 00040000) >ACPI: DSDT 0x00000000AAFEF000 0075B5 (v02 INSYDE CR CRB 00000000 ACPI 00040000) >ACPI: FACS 0x00000000AAFBB000 000040 >ACPI: TCPA 0x00000000AAFFD000 000032 (v02 INSYDE CR CRB 00000000 ACPI 00040000) >ACPI: UEFI 0x00000000AAFFC000 000236 (v01 INSYDE CR CRB 00000001 ACPI 00040000) >ACPI: HPET 0x00000000AAFF9000 000038 (v01 INSYDE CR CRB 00000001 ACPI 00040000) >ACPI: APIC 0x00000000AAFF8000 00008C (v03 INSYDE CR CRB 00000001 ACPI 00040000) >ACPI: MCFG 0x00000000AAFF7000 00003C (v01 INSYDE CR CRB 00000001 ACPI 00040000) >ACPI: SSDT 0x00000000AAFEE000 00055F (v01 INSYDE CR CRB 00001000 ACPI 00040000) >ACPI: BOOT 0x00000000AAFEC000 000028 (v01 INSYDE CR CRB 00000001 ACPI 00040000) >ACPI: ASPT 0x00000000AAFE7000 000034 (v07 INSYDE CR CRB 00000001 ACPI 00040000) >ACPI: FPDT 0x00000000AAFE5000 000044 (v01 INSYDE CR CRB 00000001 ACPI 00040000) >ACPI: ASF! 0x00000000AAFFB000 0000A5 (v32 INSYDE CR CRB 00000001 ACPI 00040000) >ACPI: SSDT 0x00000000AAFE3000 0009AA (v01 INSYDE CR CRB 00003000 ACPI 00040000) >ACPI: SSDT 0x00000000AAFE2000 000A92 (v01 INSYDE CR CRB 00003000 ACPI 00040000) >ACPI: DMAR 0x00000000AAFE1000 0000B0 (v01 INSYDE CR CRB 00000001 ACPI 00040000) >ACPI: SSDT 0x00000000AAFE0000 000337 (v01 Insyde TPMACPI 00001000 INTL 20111123) >ACPI: SSDT 0x00000000AAFDE000 001340 (v01 Insyde SIOACPI 00001000 INTL 20111123) >MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000 >ioapic0: Routing external 8259A's -> intpin 0 >MADT: Interrupt override: source 0, irq 2 >ioapic0: Routing IRQ 0 -> intpin 2 >MADT: Interrupt override: source 9, irq 9 >ioapic0: intpin 9 trigger: level >ioapic0 <Version 2.0> irqs 0-23 on motherboard >cpu0 BSP: > ID: 0x00000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 >wlan: <802.11 Link Layer> >snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] >feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 >kbd: new array size 4 >kbd1 at kbdmux0 >mem: <memory> >Pentium Pro MTRR support enabled >null: <null device, zero device> >nfslock: pseudo-device >VESA: INT 0x10 vector 0xc000:0x0014 >VESA: information block >0000 56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00 >0010 00 01 ff 03 00 01 45 01 00 01 57 01 00 01 8a 01 >0020 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >0040 60 01 61 01 62 01 63 01 64 01 65 01 66 01 67 01 >0050 68 01 69 01 6a 01 6b 01 6c 01 6d 01 6e 01 6f 01 >0060 70 01 71 01 3c 01 4d 01 5c 01 3a 01 4b 01 5a 01 >0070 07 01 1a 01 1b 01 05 01 17 01 18 01 12 01 14 01 >0080 15 01 01 01 03 01 11 01 7d 01 7e 01 7f 01 ff ff >0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >0100 49 6e 74 65 6c 28 52 29 20 53 61 6e 64 79 62 72 >0110 69 64 67 65 2f 49 76 79 62 72 69 64 67 65 20 47 >0120 72 61 70 68 69 63 73 20 43 68 69 70 73 65 74 20 >0130 41 63 63 65 6c 65 72 61 74 65 64 20 56 47 41 20 >0140 42 49 4f 53 00 49 6e 74 65 6c 20 43 6f 72 70 6f >0150 72 61 74 69 6f 6e 00 49 6e 74 65 6c 28 52 29 20 >0160 53 61 6e 64 79 62 72 69 64 67 65 2f 49 76 79 62 >0170 72 69 64 67 65 20 47 72 61 70 68 69 63 73 20 43 >0180 6f 6e 74 72 6f 6c 6c 65 72 00 48 61 72 64 77 61 >0190 72 65 20 56 65 72 73 69 6f 6e 20 30 2e 30 00 00 >01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >VESA: 39 mode(s) found >VESA: v3.0, 65472k memory, flags:0x1, mode table:0xe3335040 (1000040) >VESA: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS >VESA: Intel Corporation Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0 >VMBUS: load >io: <I/O> >hpt27xx: RocketRAID 27xx controller driver v1.2.7 >hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 >hptnr: R750/DC7280 controller driver v1.1.4 >acpi0: <INSYDE CR CRB> on motherboard >ACPI: All ACPI Tables successfully acquired >PCIe: Memory Mapped configuration base @ 0xf0000000 >pcibios: BIOS version 3.00 >ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 >ACPI: Executed 1 blocks of module-level executable AML code >acpi0: Power Button (fixed) >acpi0: wakeup code va 0xe3389000 pa 0x9c000 >cpu0: Processor \134_PR_.CPU0 (ACPI ID 1) -> APIC ID 0 >cpu0: <ACPI CPU> on acpi0 >ACPI: Dynamic OEM Table Load: >ACPI: SSDT 0x00000000C7C90000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123) >cpu1: Processor \134_PR_.CPU1 (ACPI ID 2) -> APIC ID 1 >cpu1: <ACPI CPU> on acpi0 >ACPI: Dynamic OEM Table Load: >ACPI: SSDT 0x00000000C7C8A400 000303 (v01 PmRef ApIst 00003000 INTL 20111123) >ACPI: Dynamic OEM Table Load: >ACPI: SSDT 0x00000000C7B03E00 000119 (v01 PmRef ApCst 00003000 INTL 20111123) >cpu2: Processor \134_PR_.CPU2 (ACPI ID 3) -> APIC ID 2 >cpu2: <ACPI CPU> on acpi0 >cpu3: Processor \134_PR_.CPU3 (ACPI ID 4) -> APIC ID 3 >cpu3: <ACPI CPU> on acpi0 >ACPI: Processor \134_PR_.CPU4 (ACPI ID 5) ignored >ACPI: Processor \134_PR_.CPU5 (ACPI ID 6) ignored >ACPI: Processor \134_PR_.CPU6 (ACPI ID 7) ignored >ACPI: Processor \134_PR_.CPU7 (ACPI ID 8) ignored >hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route >hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic >hpet0: t1: irqs 0x00f00000 (0), MSI >hpet0: t2: irqs 0x00f00800 (0), MSI >hpet0: t3: irqs 0x00f01000 (0), MSI >hpet0: t4: irqs 0x00000000 (0), MSI >hpet0: t5: irqs 0x00000000 (0), MSI >hpet0: t6: irqs 0x00000000 (0), MSI >hpet0: t7: irqs 0x00000000 (0), MSI >Timecounter "HPET" frequency 14318180 Hz quality 950 >msi: routing MSI-X IRQ 256 to local APIC 0 vector 49 >msi: routing MSI-X IRQ 257 to local APIC 0 vector 50 >msi: routing MSI-X IRQ 258 to local APIC 0 vector 51 >msi: routing MSI-X IRQ 259 to local APIC 0 vector 52 >msi: routing MSI-X IRQ 260 to local APIC 0 vector 53 >msi: routing MSI-X IRQ 261 to local APIC 0 vector 54 >msi: routing MSI-X IRQ 262 to local APIC 0 vector 55 >msi: routing MSI-X IRQ 263 to local APIC 0 vector 56 >Event timer "HPET" frequency 14318180 Hz quality 550 >Event timer "HPET1" frequency 14318180 Hz quality 440 >Event timer "HPET2" frequency 14318180 Hz quality 440 >Event timer "HPET3" frequency 14318180 Hz quality 440 >Event timer "HPET4" frequency 14318180 Hz quality 440 >atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 >atrtc0: Warning: Couldn't map I/O. >atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) >ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57 >Event timer "RTC" frequency 32768 Hz quality 0 >attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 >Timecounter "i8254" frequency 1193182 Hz quality 0 >ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 58 >Event timer "i8254" frequency 1193182 Hz quality 100 >ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 >Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 1 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 1 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 1 3 4 5 6 10 11 12 14 15 >pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 1 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 1 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 1 3 4 5 6 10 11 12 14 15 >pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 1 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 1 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 1 3 4 5 6 10 11 12 14 15 >pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 1 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 1 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 1 3 4 5 6 10 11 12 14 15 >pci_link4: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 1 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 1 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 1 3 4 5 6 10 11 12 14 15 >pci_link5: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 1 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 1 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 1 3 4 5 6 10 11 12 14 15 >pci_link6: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 1 3 4 5 6 10 11 12 14 15 > Validation 0 255 N 0 1 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 1 3 4 5 6 10 11 12 14 15 >pci_link7: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 1 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 1 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 1 3 4 5 6 10 11 12 14 15 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pcib0: decoding 5 range 0-0x3e >pcib0: decoding 4 range 0-0xcf7 >pcib0: decoding 4 range 0xd00-0xffff >pcib0: decoding 3 range 0xa0000-0xbffff >pcib0: decoding 3 range 0xafa00000-0xfeafffff >pci0: <ACPI PCI bus> on pcib0 >pci0: domain=0, physical bus=0 >found-> vendor=0x8086, dev=0x0154, revid=0x09 > domain=0, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >found-> vendor=0x8086, dev=0x0166, revid=0x09 > domain=0, bus=0, slot=2, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 64, base 0xc0000000, size 22, enabled >pcib0: allocated type 3 (0xc0000000-0xc03fffff) for rid 10 of pci0:0:2:0 > map[18]: type Prefetchable Memory, range 64, base 0xb0000000, size 28, enabled >pcib0: allocated type 3 (0xb0000000-0xbfffffff) for rid 18 of pci0:0:2:0 > map[20]: type I/O Port, range 32, base 0x6800, size 6, enabled >pcib0: allocated type 4 (0x6800-0x683f) for rid 20 of pci0:0:2:0 >pcib0: matched entry for 0.2.INTA >pcib0: slot 2 INTA hardwired to IRQ 16 >found-> vendor=0x8086, dev=0x1e3a, revid=0x04 > domain=0, bus=0, slot=22, func=0 > class=07-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xc0a20000, size 4, enabled >pcib0: allocated type 3 (0xc0a20000-0xc0a2000f) for rid 10 of pci0:0:22:0 >pcib0: matched entry for 0.22.INTA >pcib0: slot 22 INTA hardwired to IRQ 16 >found-> vendor=0x8086, dev=0x1e3d, revid=0x04 > domain=0, bus=0, slot=22, func=3 > class=07-00-02, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type I/O Port, range 32, base 0x6700, size 3, enabled >pcib0: allocated type 4 (0x6700-0x6707) for rid 10 of pci0:0:22:3 > map[14]: type Memory, range 32, base 0xc0a28000, size 12, enabled >pcib0: allocated type 3 (0xc0a28000-0xc0a28fff) for rid 14 of pci0:0:22:3 >pcib0: matched entry for 0.22.INTB >pcib0: slot 22 INTB hardwired to IRQ 17 >found-> vendor=0x8086, dev=0x1502, revid=0x04 > domain=0, bus=0, slot=25, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 32, base 0xc0a00000, size 17, enabled >pcib0: allocated type 3 (0xc0a00000-0xc0a1ffff) for rid 10 of pci0:0:25:0 > map[14]: type Memory, range 32, base 0xc0a27000, size 12, enabled >pcib0: allocated type 3 (0xc0a27000-0xc0a27fff) for rid 14 of pci0:0:25:0 > map[18]: type I/O Port, range 32, base 0x6600, size 5, enabled >pcib0: allocated type 4 (0x6600-0x661f) for rid 18 of pci0:0:25:0 >pcib0: matched entry for 0.25.INTA >pcib0: slot 25 INTA hardwired to IRQ 20 >found-> vendor=0x8086, dev=0x1e2d, revid=0x04 > domain=0, bus=0, slot=26, func=0 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xc0a26000, size 10, enabled >pcib0: allocated type 3 (0xc0a26000-0xc0a263ff) for rid 10 of pci0:0:26:0 >pcib0: matched entry for 0.26.INTA >pcib0: slot 26 INTA hardwired to IRQ 16 >ehci early: SMM active, request owner change >found-> vendor=0x8086, dev=0x1e10, revid=0xc4 > domain=0, bus=0, slot=28, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.28.INTA >pcib0: slot 28 INTA hardwired to IRQ 17 > secbus=1, subbus=1 >found-> vendor=0x8086, dev=0x1e12, revid=0xc4 > domain=0, bus=0, slot=28, func=1 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.28.INTB >pcib0: slot 28 INTB hardwired to IRQ 16 > secbus=2, subbus=2 >found-> vendor=0x8086, dev=0x1e14, revid=0xc4 > domain=0, bus=0, slot=28, func=2 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.28.INTC >pcib0: slot 28 INTC hardwired to IRQ 18 > secbus=3, subbus=3 >found-> vendor=0x8086, dev=0x1e18, revid=0xc4 > domain=0, bus=0, slot=28, func=4 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.28.INTA >pcib0: slot 28 INTA hardwired to IRQ 17 > secbus=4, subbus=4 >found-> vendor=0x8086, dev=0x1e1e, revid=0xc4 > domain=0, bus=0, slot=28, func=7 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=d, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.28.INTD >pcib0: slot 28 INTD hardwired to IRQ 19 > secbus=5, subbus=6 >found-> vendor=0x8086, dev=0x1e26, revid=0x04 > domain=0, bus=0, slot=29, func=0 > class=0c-03-20, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xc0a25000, size 10, enabled >pcib0: allocated type 3 (0xc0a25000-0xc0a253ff) for rid 10 of pci0:0:29:0 >pcib0: matched entry for 0.29.INTA >pcib0: slot 29 INTA hardwired to IRQ 23 >ehci early: SMM active, request owner change >found-> vendor=0x8086, dev=0x1e55, revid=0x04 > domain=0, bus=0, slot=31, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >found-> vendor=0x8086, dev=0x1e03, revid=0x04 > domain=0, bus=0, slot=31, func=2 > class=01-06-01, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type I/O Port, range 32, base 0x6500, size 3, enabled >pcib0: allocated type 4 (0x6500-0x6507) for rid 10 of pci0:0:31:2 > map[14]: type I/O Port, range 32, base 0x6400, size 2, enabled >pcib0: allocated type 4 (0x6400-0x6403) for rid 14 of pci0:0:31:2 > map[18]: type I/O Port, range 32, base 0x6300, size 3, enabled >pcib0: allocated type 4 (0x6300-0x6307) for rid 18 of pci0:0:31:2 > map[1c]: type I/O Port, range 32, base 0x6200, size 2, enabled >pcib0: allocated type 4 (0x6200-0x6203) for rid 1c of pci0:0:31:2 > map[20]: type I/O Port, range 32, base 0x6100, size 5, enabled >pcib0: allocated type 4 (0x6100-0x611f) for rid 20 of pci0:0:31:2 > map[24]: type Memory, range 32, base 0xc0a24000, size 11, enabled >pcib0: allocated type 3 (0xc0a24000-0xc0a247ff) for rid 24 of pci0:0:31:2 >pcib0: matched entry for 0.31.INTB >pcib0: slot 31 INTB hardwired to IRQ 19 >found-> vendor=0x8086, dev=0x1e22, revid=0x04 > domain=0, bus=0, slot=31, func=3 > class=0c-05-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=11 > map[10]: type Memory, range 64, base 0xc0a22000, size 8, enabled >pcib0: allocated type 3 (0xc0a22000-0xc0a220ff) for rid 10 of pci0:0:31:3 > map[20]: type I/O Port, range 32, base 0x6000, size 5, enabled >pcib0: allocated type 4 (0x6000-0x601f) for rid 20 of pci0:0:31:3 >pcib0: matched entry for 0.31.INTC >pcib0: slot 31 INTC hardwired to IRQ 19 >vgapci0: <VGA-compatible display> port 0x6800-0x683f mem 0xc0000000-0xc03fffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 >agp0: <IvyBridge mobile GT2 IG> on vgapci0 >agp0: aperture size is 256M, detected 65532k stolen memory >agp0: AGP_SNB_GFX_MODE: 00000000 >agp0: AGP_SNB_GCC1: 0x0211 >agp0: Mappable GTT entries: 65536 >agp0: Total GTT entries: 524288 >vgapci0: Boot video device >pci0: <simple comms> at device 22.0 (no driver attached) >uart2: <Intel Panther Point KT Controller> port 0x6700-0x6707 mem 0xc0a28000-0xc0a28fff irq 17 at device 22.3 on pci0 >ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 59 >uart2: fast interrupt >uart2: PPS capture mode: DCDinvalid >em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x6600-0x661f mem 0xc0a00000-0xc0a1ffff,0xc0a27000-0xc0a27fff irq 20 at device 25.0 on pci0 >em0: attempting to allocate 1 MSI vectors (1 supported) >msi: routing MSI IRQ 264 to local APIC 0 vector 60 >em0: using IRQ 264 for MSI >em0: Using an MSI interrupt >em0: bpf attached >em0: Ethernet address: 00:90:e8:68:f8:65 >ehci0: <Intel Panther Point USB 2.0 controller> mem 0xc0a26000-0xc0a263ff irq 16 at device 26.0 on pci0 >ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 61 >usbus0: EHCI version 1.0 >usbus0 on ehci0 >ehci0: usbpf: Attached >pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 >pcib0: allocated type 4 (0x5000-0x5fff) for rid 1c of pcib1 >pcib0: allocated type 3 (0xc0900000-0xc09fffff) for rid 20 of pcib1 >pcib1: domain 0 >pcib1: secondary bus 1 >pcib1: subordinate bus 1 >pcib1: I/O decode 0x5000-0x5fff >pcib1: memory decode 0xc0900000-0xc09fffff >pci1: <ACPI PCI bus> on pcib1 >pcib1: allocated bus range (1-1) for rid 0 of pci1 >pci1: domain=0, physical bus=1 >found-> vendor=0x8086, dev=0x10d3, revid=0x00 > domain=0, bus=1, slot=0, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > MSI-X supports 5 messages in map 0x1c > map[10]: type Memory, range 32, base 0xc0900000, size 17, enabled >pcib1: allocated memory range (0xc0900000-0xc091ffff) for rid 10 of pci0:1:0:0 > map[18]: type I/O Port, range 32, base 0x5000, size 5, enabled >pcib1: allocated I/O port range (0x5000-0x501f) for rid 18 of pci0:1:0:0 > map[1c]: type Memory, range 32, base 0xc0920000, size 14, enabled >pcib1: allocated memory range (0xc0920000-0xc0923fff) for rid 1c of pci0:1:0:0 >pcib1: matched entry for 1.0.INTA >pcib1: slot 0 INTA hardwired to IRQ 16 >em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x5000-0x501f mem 0xc0900000-0xc091ffff,0xc0920000-0xc0923fff irq 16 at device 0.0 on pci1 >em1: attempting to allocate 1 MSI vectors (1 supported) >msi: routing MSI IRQ 265 to local APIC 0 vector 62 >em1: using IRQ 265 for MSI >em1: Using an MSI interrupt >em1: bpf attached >em1: Ethernet address: 00:90:e8:68:f8:62 >pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 >pcib0: allocated type 4 (0x4000-0x4fff) for rid 1c of pcib2 >pcib0: allocated type 3 (0xc0800000-0xc08fffff) for rid 20 of pcib2 >pcib2: domain 0 >pcib2: secondary bus 2 >pcib2: subordinate bus 2 >pcib2: I/O decode 0x4000-0x4fff >pcib2: memory decode 0xc0800000-0xc08fffff >pci2: <ACPI PCI bus> on pcib2 >pcib2: allocated bus range (2-2) for rid 0 of pci2 >pci2: domain=0, physical bus=2 >found-> vendor=0x8086, dev=0x10d3, revid=0x00 > domain=0, bus=2, slot=0, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > MSI-X supports 5 messages in map 0x1c > map[10]: type Memory, range 32, base 0xc0800000, size 17, enabled >pcib2: allocated memory range (0xc0800000-0xc081ffff) for rid 10 of pci0:2:0:0 > map[18]: type I/O Port, range 32, base 0x4000, size 5, enabled >pcib2: allocated I/O port range (0x4000-0x401f) for rid 18 of pci0:2:0:0 > map[1c]: type Memory, range 32, base 0xc0820000, size 14, enabled >pcib2: allocated memory range (0xc0820000-0xc0823fff) for rid 1c of pci0:2:0:0 >pcib2: matched entry for 2.0.INTA >pcib2: slot 0 INTA hardwired to IRQ 17 >em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x4000-0x401f mem 0xc0800000-0xc081ffff,0xc0820000-0xc0823fff irq 17 at device 0.0 on pci2 >em2: attempting to allocate 1 MSI vectors (1 supported) >msi: routing MSI IRQ 266 to local APIC 0 vector 63 >em2: using IRQ 266 for MSI >em2: Using an MSI interrupt >em2: bpf attached >em2: Ethernet address: 00:90:e8:68:f8:63 >pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 >pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib3 >pcib0: allocated type 3 (0xc0700000-0xc07fffff) for rid 20 of pcib3 >pcib3: domain 0 >pcib3: secondary bus 3 >pcib3: subordinate bus 3 >pcib3: I/O decode 0x3000-0x3fff >pcib3: memory decode 0xc0700000-0xc07fffff >pci3: <ACPI PCI bus> on pcib3 >pcib3: allocated bus range (3-3) for rid 0 of pci3 >pci3: domain=0, physical bus=3 >found-> vendor=0x8086, dev=0x10d3, revid=0x00 > domain=0, bus=3, slot=0, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > MSI-X supports 5 messages in map 0x1c > map[10]: type Memory, range 32, base 0xc0700000, size 17, enabled >pcib3: allocated memory range (0xc0700000-0xc071ffff) for rid 10 of pci0:3:0:0 > map[18]: type I/O Port, range 32, base 0x3000, size 5, enabled >pcib3: allocated I/O port range (0x3000-0x301f) for rid 18 of pci0:3:0:0 > map[1c]: type Memory, range 32, base 0xc0720000, size 14, enabled >pcib3: allocated memory range (0xc0720000-0xc0723fff) for rid 1c of pci0:3:0:0 >pcib3: matched entry for 3.0.INTA >pcib3: slot 0 INTA hardwired to IRQ 18 >em3: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3000-0x301f mem 0xc0700000-0xc071ffff,0xc0720000-0xc0723fff irq 18 at device 0.0 on pci3 >em3: attempting to allocate 1 MSI vectors (1 supported) >msi: routing MSI IRQ 267 to local APIC 0 vector 64 >em3: using IRQ 267 for MSI >em3: Using an MSI interrupt >em3: bpf attached >em3: Ethernet address: 00:90:e8:68:f8:64 >pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 >pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib4 >pcib0: allocated type 3 (0xc0600000-0xc06fffff) for rid 20 of pcib4 >pcib0: allocated type 3 (0xc0400000-0xc04fffff) for rid 24 of pcib4 >pcib4: domain 0 >pcib4: secondary bus 4 >pcib4: subordinate bus 4 >pcib4: I/O decode 0x2000-0x2fff >pcib4: memory decode 0xc0600000-0xc06fffff >pcib4: prefetched decode 0xc0400000-0xc04fffff >pci4: <ACPI PCI bus> on pcib4 >pcib4: allocated bus range (4-4) for rid 0 of pci4 >pci4: domain=0, physical bus=4 >found-> vendor=0x10ec, dev=0x8168, revid=0x06 > domain=0, bus=4, slot=0, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > MSI-X supports 4 messages in map 0x20 > map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled >pcib4: allocated I/O port range (0x2000-0x20ff) for rid 10 of pci0:4:0:0 > map[18]: type Memory, range 64, base 0xc0600000, size 12, enabled >pcib4: allocated memory range (0xc0600000-0xc0600fff) for rid 18 of pci0:4:0:0 > map[20]: type Prefetchable Memory, range 64, base 0xc0400000, size 14, enabled >pcib4: allocated prefetch range (0xc0400000-0xc0403fff) for rid 20 of pci0:4:0:0 >pcib4: matched entry for 4.0.INTA >pcib4: slot 0 INTA hardwired to IRQ 16 >re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xc0600000-0xc0600fff,0xc0400000-0xc0403fff irq 16 at device 0.0 on pci4 >re0: MSI count : 1 >re0: MSI-X count : 4 >re0: attempting to allocate 1 MSI-X vectors (4 supported) >msi: routing MSI-X IRQ 268 to local APIC 0 vector 65 >re0: using IRQ 268 for MSI-X >re0: Using 1 MSI-X message >re0: Chip rev. 0x2c000000 >re0: MAC rev. 0x00200000 >miibus0: <MII bus> on re0 >rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 >rgephy0: OUI 0x00e04c, model 0x0011, rev. 4 >rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow >re0: Using defaults for TSO: 65518/35/2048 >re0: bpf attached >re0: Ethernet address: 98:de:d0:06:23:db >pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 >pcib0: allocated type 3 (0xc0500000-0xc05fffff) for rid 24 of pcib5 >pcib5: domain 0 >pcib5: secondary bus 5 >pcib5: subordinate bus 6 >pcib5: prefetched decode 0xc0500000-0xc05fffff >pci5: <ACPI PCI bus> on pcib5 >pcib5: allocated bus range (5-5) for rid 0 of pci5 >pci5: domain=0, physical bus=5 >found-> vendor=0x10b5, dev=0x8112, revid=0xaa > domain=0, bus=5, slot=0, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0017, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D1 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Prefetchable Memory, range 64, base 0xc0500000, size 16, enabled >pcib5: allocated prefetch range (0xc0500000-0xc050ffff) for rid 10 of pci0:5:0:0 >pcib5: matched entry for 5.0.INTA >pcib5: slot 0 INTA hardwired to IRQ 19 > secbus=6, subbus=6 >pcib5: allocated bus range (6-6) for rid 0 of pci0:5:0:0 >pcib6: <ACPI PCI-PCI bridge> mem 0xc0500000-0xc050ffff irq 19 at device 0.0 on pci5 >pcib6: domain 0 >pcib6: secondary bus 6 >pcib6: subordinate bus 6 >pcib6: could not get PCI interrupt routing table for \134_SB_.PCI0.RP08.PXSX - AE_NOT_FOUND >pci6: <ACPI PCI bus> on pcib6 >pcib6: allocated bus range (6-6) for rid 0 of pci6 >pci6: domain=0, physical bus=6 >ehci1: <Intel Panther Point USB 2.0 controller> mem 0xc0a25000-0xc0a253ff irq 23 at device 29.0 on pci0 >ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 66 >usbus1: EHCI version 1.0 >usbus1 on ehci1 >ehci1: usbpf: Attached >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >ahci0: <Intel Panther Point AHCI SATA controller> port 0x6500-0x6507,0x6400-0x6403,0x6300-0x6307,0x6200-0x6203,0x6100-0x611f mem 0xc0a24000-0xc0a247ff irq 19 at device 31.2 on pci0 >ahci0: attempting to allocate 1 MSI vectors (1 supported) >msi: routing MSI IRQ 269 to local APIC 0 vector 67 >ahci0: using IRQ 269 for MSI >ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported >ahci0: Caps: 64bit NCQ ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM 6ports >ahci0: Caps2: APST >ahcich0: not probed (disabled) >ahcich1: <AHCI channel> at channel 1 on ahci0 >ahcich1: Caps: >ahcich2: not probed (disabled) >ahcich3: not probed (disabled) >ahcich4: not probed (disabled) >ahcich5: not probed (disabled) >ahciem0: <AHCI enclosure management bridge> on ahci0 >ahciem0: Caps: ALHD XMT SMB LED >pci0: <serial bus, SMBus> at device 31.3 (no driver attached) >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 >ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 68 >atkbd0: [GIANT-LOCKED] >psm0: unable to allocate IRQ >psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 >psm0: current command byte:0067 >kbdc: TEST_AUX_PORT status:0000 >kbdc: RESET_AUX return code:00fe >kbdc: RESET_AUX return code:00fe >kbdc: RESET_AUX return code:00fe >kbdc: DIAGNOSE status:0055 >kbdc: TEST_KBD_PORT status:0000 >psm0: failed to reset the aux device. >uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 69 >uart0: fast interrupt >uart0: PPS capture mode: DCDinvalid >uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 >ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 70 >uart1: fast interrupt >uart1: PPS capture mode: DCDinvalid >ACPI: Enabled 7 GPEs in block 00 to 3F >ahc_isa_identify 0: ioport 0xc00 alloc failed >ahc_isa_identify 1: ioport 0x1c00 alloc failed >ahc_isa_identify 2: ioport 0x2c00 alloc failed >ahc_isa_identify 3: ioport 0x3c00 alloc failed >ahc_isa_identify 4: ioport 0x4c00 alloc failed >ahc_isa_identify 5: ioport 0x5c00 alloc failed >ahc_isa_identify 6: ioport 0x6c00 alloc failed >ahc_isa_identify 7: ioport 0x7c00 alloc failed >ahc_isa_identify 8: ioport 0x8c00 alloc failed >ahc_isa_identify 9: ioport 0x9c00 alloc failed >ahc_isa_identify 10: ioport 0xac00 alloc failed >ahc_isa_identify 11: ioport 0xbc00 alloc failed >ahc_isa_identify 12: ioport 0xcc00 alloc failed >ahc_isa_identify 13: ioport 0xdc00 alloc failed >ahc_isa_identify 14: ioport 0xec00 alloc failed >pnp_identify: Trying Read_Port at 203 >pnp_identify: Trying Read_Port at 243 >pnp_identify: Trying Read_Port at 283 >pnp_identify: Trying Read_Port at 2c3 >pnp_identify: Trying Read_Port at 303 >pnp_identify: Trying Read_Port at 343 >pnp_identify: Trying Read_Port at 383 >pnp_identify: Trying Read_Port at 3c3 >PNP Identify complete >ex_isa_identify() >pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 >pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 >pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 >pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 >pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 >pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 >isa_probe_children: disabling PnP devices >pmtimer0 on isa0 >atkbdc: atkbdc0 already exists; skipping it >atrtc: atrtc0 already exists; skipping it >attimer: attimer0 already exists; skipping it >sc: sc0 already exists; skipping it >uart: uart0 already exists; skipping it >uart: uart1 already exists; skipping it >isa_probe_children: probing non-PnP devices >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 >pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 >pcib0: allocated type 4 (0x1f0-0x1f7) for rid 0 of ata0 >pcib0: allocated type 4 (0x3f6-0x3f6) for rid 1 of ata0 >pcib0: allocated type 4 (0x1f0-0x1f7) for rid 0 of ata0 >pcib0: allocated type 4 (0x3f6-0x3f6) for rid 1 of ata0 >ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 >pcib0: allocated type 4 (0x1f0-0x1f7) for rid 0 of ata0 >pcib0: allocated type 4 (0x3f6-0x3f6) for rid 1 of ata0 >ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 71 >pcib0: allocated type 4 (0x170-0x177) for rid 0 of ata1 >pcib0: allocated type 4 (0x376-0x376) for rid 1 of ata1 >pcib0: allocated type 4 (0x170-0x177) for rid 0 of ata1 >pcib0: allocated type 4 (0x376-0x376) for rid 1 of ata1 >ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 >pcib0: allocated type 4 (0x170-0x177) for rid 0 of ata1 >pcib0: allocated type 4 (0x376-0x376) for rid 1 of ata1 >ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 72 >pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 >pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 >fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 >ppc0: parallel port found at 0x378 >pcib0: allocated type 4 (0x378-0x37f) for rid 0 of ppc0 >ppc0: using extended I/O port range >ppc0: SPP >ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode >ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 73 >ppbus0: <Parallel port bus> on ppc0 >lpt0: <Printer> on ppbus0 >lpt0: Interrupt-driven port >ppi0: <Parallel I/O> on ppbus0 >wbwd0 failed to probe on isa0 >isa_probe_children: probing PnP devices >coretemp0: <CPU On-Die Thermal Sensors> on cpu0 >coretemp0: Setting TjMax=105 >est0: <Enhanced SpeedStep Frequency Control> on cpu0 >coretemp1: <CPU On-Die Thermal Sensors> on cpu1 >coretemp1: Setting TjMax=105 >est1: <Enhanced SpeedStep Frequency Control> on cpu1 >coretemp2: <CPU On-Die Thermal Sensors> on cpu2 >coretemp2: Setting TjMax=105 >est2: <Enhanced SpeedStep Frequency Control> on cpu2 >coretemp3: <CPU On-Die Thermal Sensors> on cpu3 >coretemp3: Setting TjMax=105 >est3: <Enhanced SpeedStep Frequency Control> on cpu3 >Device configuration finished. >random: unblocking device. >usbus0: 480Mbps High Speed USB v2.0 >procfs registered >lapic: Divisor 2, Frequency 49887812 Hz >Timecounters tick every 1.000 msec >vlan: initialized, using hash tables with chaining >tcp_init: net.inet.tcp.tcbhashsize auto tuned to 32768 >lo0: bpf attached >hpt27xx: no controller detected. >hptrr: no controller detected. >hptnr: no controller detected. >usbus1: 480Mbps High Speed USB v2.0 >ahcich1: AHCI reset... >ahcich1: SATA connect time=900us status=00000123 >ahcich1: AHCI reset: device found >ahcich1: AHCI reset: device ready after 0ms >ata0: reset tp1 mask=00 ostat0=ff ostat1=ff >ata1: reset tp1 mask=00 ostat0=ff ostat1=ff >pass0 at ahcich1 bus 0 scbus0 target 0 lun 0 >pass0: <INTEL SSDSA2BZ100G3 6PB10362> ATA8-ACS SATA 2.x device >pass0: Serial Number CVLV2502002Q100AGN >pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >pass0: Command Queueing enabled >pass1 at ahciem0 bus 0 scbus1 target 0 lun 0 >pass1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device >ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 >ada0: <INTEL SSDSA2BZ100G3 6PB10362> ATA8-ACS SATA 2.x device >ugen0.1: <Intel> at usbus0 >uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 >ugen1.1: <Intel> at usbus1 >uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 >GEOM: new disk ada0 >ada0: Serial Number CVLV2502002Q100AGN >ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >ada0: Command Queueing enabled >ada0: 95396MB (195371568 512 byte sectors) >ada0: Previously was known as ad4 >ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 >ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device >ses0: SEMB SES Device >ses0: Generation Code 0x0 has 1 SubEnclosures >ses0: SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8 >ses0: WWN: 0 >ses0: Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0: >lapic3: CMCI unmasked >lapic2: CMCI unmasked >SMP: AP CPU #1 Launched! >cpu1 AP: > ID: 0x01000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000100f2 >SMP: AP CPU #2 Launched! >cpu2 AP: > ID: 0x02000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 >SMP: AP CPU #3 Launched! >cpu3 AP: > ID: 0x03000000 VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 >ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48 >ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 2 vector 48 >ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 3 vector 48 >ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 49 >ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 2 vector 49 >ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 3 vector 49 >ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50 >ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 50 >msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 51 >msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 51 >msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 50 >msi: Assigning MSI IRQ 264 to local APIC 3 vector 51 >msi: Assigning MSI IRQ 266 to local APIC 1 vector 52 >msi: Assigning MSI IRQ 267 to local APIC 2 vector 52 >msi: Assigning MSI-X IRQ 268 to local APIC 3 vector 52 >SMP: passed TSC synchronization test >TSC timecounter discards lower 1 bit(s) >Timecounter "TSC-low" frequency 1247194770 Hz quality 1000 >Root mount waiting for: usbus1 usbus0 >Root mount waiting for: usbus1 usbus0 >uhub0: 3 ports with 3 removable, self powered >uhub1: 3 ports with 3 removable, self powered >Root mount waiting for: usbus1 usbus0 >ugen1.2: <vendor 0x8087> at usbus1 >uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 >ugen0.2: <vendor 0x8087> at usbus0 >uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 >Root mount waiting for: usbus1 usbus0 >uhub3: 6 ports with 6 removable, self powered >uhub2: 8 ports with 8 removable, self powered >Trying to mount root from ufs:/dev/ada0p2 [rw]... >start_init: trying /sbin/init >re0: link state changed to DOWN >re0: link state changed to UP
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 225535
:
190162
| 190196 |
190201