Attachment 190909 Details for Bug 226130 – Console boot log

Console boot log

file_226130.txt (text/plain), 9.99 KB, created by Keith White on 2018-02-22 22:40:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Keith White

Created: 2018-02-22 22:40:48 UTC

Size: 9.99 KB

patch

obsolete

>U-Boot 2017.09 (Dec 28 2017 - 05:44:38 +0000)
>
>DRAM:  992 MiB
>RPI 3 Model B (0xa02082)
>MMC:   sdhci@7e300000: 0
>reading uboot.env
>
>** Unable to read "uboot.env" from mmc0:1 **
>Using default environment
>
>In:    serial
>Out:   vidconsole
>Err:   vidconsole
>Net:   No ethernet found.
>starting USB...
>USB0:   Core Release: 2.80a
>scanning bus 0 for devices... ** First descriptor is NOT a primary desc on 0:1 **
>5 USB Device(s) found
>       scanning usb for storage devices... 1 Storage Device(s) found
>Hit any key to stop autoboot:  0 
>switch to partitions #0, OK
>mmc0 is current device
>Scanning mmc 0:1...
>Found FreeBSD U-Boot Loader (bin)
>reading ubldr.bin
>237504 bytes read in 76 ms (3 MiB/s)
>## Starting application at 0x01000000 ...
>Consoles: U-Boot console  
>Compatible U-Boot API signature found @0x3db5d988
>
>FreeBSD/armv7 U-Boot loader, Revision 1.2
>(Wed Jan  3 20:55:16 EST 2018 freebsd@rpi3uk)
>
>DRAM: 992MB
>Number of U-Boot devices: 2
>U-Boot env: loaderdev not set, will probe all devices.
>Found U-Boot device: disk
>  Probing all disk devices...
>  Checking unit=0 slice=<auto> partition=<auto>...
>  Checking unit=1 slice=<auto> partition=<auto>... good.
>Booting from disk1s2a:
>/boot/kernel/kernel text=0x687b1c data=0x6508c+0x1da434 syms=[0x4+0x751d0+0x4+0xa9387]
>/boot/kernel/geom_uzip.ko text=0x6dac data=0xbd4+0x404 syms=[0x4+0xf90+0x4+0xc4c]
>/boot/kernel/unionfs.ko text=0xa7b0 data=0x4f0+0x4 syms=[0x4+0x1a30+0x4+0x146d]
>/boot/kernel/nullfs.ko text=0x3b1c data=0x444+0x20 syms=[0x4+0xe90+0x4+0xb82]
>
>Hit [Enter] to boot immediately, or any other key for command prompt.
>Booting [/boot/kernel/kernel]...               
>Using DTB provided by U-Boot at address 0x100.
>Kernel entry at 0x1200180...
>Kernel args: (null)
>ARM Debug Architecture not supported
>KDB: debugger backends: ddb
>KDB: current backend: ddb
>Copyright (c) 1992-2018 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.0-CURRENT #0 r329818: Thu Feb 22 16:50:54 EST 2018
>    root@e6220:/usr/obj/usr/src/arm.armv7/sys/RPI2 arm
>FreeBSD clang version 6.0.0 (branches/release_60 324090) (based on LLVM 6.0.0)
>WARNING: WITNESS option enabled, expect reduced performance.
>VT: init without driver.
>CPU: ARM Cortex-A53 r0p4 (ECO: 0x00000080)
>CPU Features: 
>  Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7,
>  PXN, LPAE, Coherent Walk
>Optional instructions: 
>  SDIV/UDIV, UMULL, SMULL, SIMD(ext)
>LoUU:2 LoC:3 LoUIS:2 
>Cache level 1:
> 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
> 32KB/64B 2-way instruction cache Read-Alloc
>Cache level 2:
> 512KB/64B 16-way unified cache WB Read-Alloc Write-Alloc
>real memory  = 1040183296 (991 MB)
>avail memory = 1001615360 (955 MB)
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>arc4random: no preloaded entropy cache
>random: entropy device external interface
>kbd0 at kbdmux0
>ofwbus0: <Open Firmware Device Tree>
>simplebus0: <Flattened device tree simple bus> on ofwbus0
>local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
>intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 16 on simplebus0
>generic_timer0: <ARMv7 Generic Timer> irq 47,48,49,50 on simplebus0
>Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
>Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
>bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 on simplebus0
>bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0
>bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f on simplebus0
>device_attach: bcmrng0 attach returned 6
>mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 17 on simplebus0
>gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 18,19 on simplebus0
>gpiobus0: <OFW GPIO bus> on gpio0
>gpioc0: <GPIO controller> on gpio0
>uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 20 on simplebus0
>uart0: console (115200,n,8,1)
>spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e204fff irq 21 on simplebus0
>spibus0: <OFW SPI bus> on spi0
>spibus0: <unknown card> at cs 0 mode 0
>spibus0: <unknown card> at cs 1 mode 0
>iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 32 on simplebus0
>bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 38,39 on simplebus0
>usbus0 on bcm283x_dwcotg0
>sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 42 on simplebus0
>mmc0: <MMC/SD bus> on sdhci_bcm0
>fb0: <BCM2835 VT framebuffer driver> on simplebus0
>fbd0 on fb0
>VT: initialize with new VT driver "fb".
>fb0: 656x416(656x416@0,0) 24bpp
>fb0: fbswap: 1, pitch 1968, base 0x3e934000, screen_size 818688
>vchiq0: <BCM2835 VCHIQ> mem 0x7e00b840-0x7e00b84e irq 45 on simplebus0
>vchiq: local ver 8 (min 3), remote ver 8.
>pcm0: <VCHIQ audio> on vchiq0
>gpioled0: <GPIO LEDs> on ofwbus0
>gpioled0: <led0> failed to map pin
>gpioled0: <led1> failed to map pin
>cpulist0: <Open Firmware CPU Group> on ofwbus0
>cpu0: <Open Firmware CPU> on cpulist0
>bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
>cpu1: <Open Firmware CPU> on cpulist0
>cpu2: <Open Firmware CPU> on cpulist0
>cpu3: <Open Firmware CPU> on cpulist0
>cryptosoft0: <software crypto>
>Timecounters tick every 1.000 msec
>usbus0: 480Mbps High Speed USB v2.0
>iicbus0: <OFW I2C bus> on iichb0
>iic0: <I2C generic I/O> on iicbus0
>ugen0.1: <DWCOTG OTG Root HUB> at usbus0
>uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
>mmcsd0: 4GB <SDHC SA04G 1.1 SN 2BA83F12 MFG 07/2012 by 2 TM> at mmc0 50.0MHz/4bit/65535-block
>bcm2835_cpufreq0: ARM 600MHz, Core 100MHz, SDRAM 400MHz, Turbo OFF
>Release APs
>WARNING: WITNESS option enabled, expect reduced performance.
>arc4random: no preloaded entropy cache
>Trying to mount root from ufs:ufs/rootfs [ro]...
>uhub0: 1 port with 1 removable, self powered
>ugen0.2: <vendor 0x0424 product 0x9514> at usbus0
>uhub1 on uhub0
>uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
>uhub1: MTT enabled
>Warning: no time-of-day clock registered, system time will not be set accurately
>random: unblocking device.
>arc4random: no preloaded entropy cache
>uhub1: 5 ports with 4 removable, self powered
>arc4random: no preloaded entropy cache
>ugen0.3: <vendor 0x0424 product 0xec00> at usbus0
>smsc0 on uhub1
>smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
>smsc0: chip 0xec00, rev. 0002
>miibus0: <MII bus> on smsc0
>ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>ue0: <USB Ethernet> on smsc0
>ue0: Ethernet address: b8:27:eb:70:0e:a5
>ugen0.4: <SanDisk Extreme> at usbus0
>umass0 on uhub1
>umass0: <SanDisk Extreme, class 0/0, rev 2.10/0.10, addr 4> on usbus0
>umass0:  SCSI over Bulk-Only; quirks = 0x0100
>umass0:0:0: Attached to scbus0
>da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
>da0: <SanDisk Extreme 0001> Fixed Direct Access SPC-4 SCSI device
>da0: Serial Number AA010407130436303600
>da0: 40.000MB/s transfers
>da0: 30533MB (62533296 512 byte sectors)
>da0: quirks=0x2<NO_6_BYTE>
>Setting hostuuid: 30303030-3030-3030-6433-373030656135.
>Setting hostid: 0x2e4d3764.
>ugen0.5: <Realtek RTL2838UHIDIR> at usbus0
>No suitable dump device was found.
>Starting file system checks:
>Mounting local filesystems:mount: /boot/msdos: No such file or directory
>WARNING: /.root was not properly dismounted
>Mounting /etc/fstab filesystems failed, will retry after root mount hold release
>.
>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/perl5/5.24/mach/CORE
>Soft Float compatibility ldconfig path:
>Setting hostname: rpi3uk.
>Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
>Feeding entropy: dd: /entropy: Read-only file system
>dd: /boot/entropy: Read-only file system
>.
>smsc0: chip 0xec00, rev. 0002
>ue0: link state changed to DOWN
>ue0: link state changed to UP
>Starting Network: lo0 ue0.
>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
>        inet6 ::1 prefixlen 128 
>        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
>        inet 127.0.0.1 netmask 0xff000000 
>        groups: lo 
>        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>        options=80009<RXCSUM,VLAN_MTU,LINKSTATE>
>        ether b8:27:eb:70:0e:a5
>        media: Ethernet autoselect (100baseTX <full-duplex>)
>        status: active
>        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>Starting devd.
>Starting dhclient.
>DHCPDISCOVER on ue0 to 255.255.255.255 port 67 interval 4
>DHCPOFFER from 192.168.5.1
>DHCPREQUEST on ue0 to 255.255.255.255 port 67
>DHCPACK from 192.168.5.1
>bound to 192.168.5.130 -- renewal in 21600 seconds.
>add host 127.0.0.1: gateway lo0 fib 0: route already in table
>add host ::1: gateway lo0 fib 0: route already in table
>add net fe80::: gateway ::1
>add net ff02::: gateway ::1
>add net ::ffff:0.0.0.0: gateway ::1
>add net ::0.0.0.0: gateway ::1
>Generating host.conf.
>eval: cannot create /etc/host.conf: Read-only file system
>eval: cannot create /etc/host.conf: Read-only file system
>eval: cannot create /etc/host.conf: Read-only file system
>Creating and/or trimming log files.
>Starting syslogd.
>Clearing /tmp (X related).
>Updating motd: /etc/motd is not writable, update failed.
>Mounting late filesystems:.
>Starting ntpd.
>Starting powerd.
>Configuring vt: blanktime.
>Performing sanity check on sshd configuration.
>Feb 20 17:04:54 rpi3uk ntpd[586]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired less than 55 days ago
>Starting sshd.
>Starting cron.
>Starting background file system checks in 60 seconds.
>
>Tue Feb 20 17:04:57 EST 2018
>
>FreeBSD/arm (rpi3uk) (ttyu0)
>
>login:

Actions: View

Attachments on bug 226130: 190909