Attachment 200136 Details for Bug 234042 – dmesg.boot

dmesg.boot

dmesg.boot.gin.txt (text/plain), 10.30 KB, created by Mike Andrews on 2018-12-15 20:12:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mike Andrews

Created: 2018-12-15 20:12:54 UTC

Size: 10.30 KB

patch

obsolete

>---<<BOOT>>---
>Copyright (c) 1992-2018 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.0-RELEASE r341666 GENERIC amd64
>FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
>VT(vga): resolution 640x480
>CPU: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz (2400.05-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
>  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>  AMD Features2=0x1<LAHF>
>  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
>  TSC: P-state invariant, performance statistics
>real memory  = 25773998080 (24580 MB)
>avail memory = 24994643968 (23836 MB)
>Event timer "LAPIC" quality 600
>ACPI APIC Table: <091710 APIC1846>
>FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
>random: unblocking device.
>Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20181003/tbfadt-748)
>ioapic0: Changing APIC ID to 6
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>Launching APs: 1 4 3 6 7 2 5
>Timecounter "TSC-low" frequency 1200026028 Hz quality 1000
>random: entropy device external interface
>netmap: loaded module
>[ath_hal] loaded
>module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
>kbd1 at kbdmux0
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
>acpi0: <SMCI > on motherboard
>acpi0: Power Button (fixed)
>cpu0: <ACPI CPU> on acpi0
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 950
>Event timer "HPET" frequency 14318180 Hz quality 350
>Event timer "HPET1" frequency 14318180 Hz quality 340
>Event timer "HPET2" frequency 14318180 Hz quality 340
>Event timer "HPET3" frequency 14318180 Hz quality 340
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>em0: <Intel(R) PRO/1000 Network Connection> port 0xdc00-0xdc1f mem 0xfbce0000-0xfbcfffff,0xfbcdc000-0xfbcdffff irq 16 at device 0.0 on pci1
>em0: attach_pre capping queues at 2
>Current cap: 0x460b
>em0: using 1024 tx descriptors and 1024 rx descriptors
>em0: msix_init qsets capped at 2
>em0: pxm cpus: 4 queue msgs: 4 admincnt: 1
>em0: using 2 rx queues 2 tx queues 
>em0: Using MSIX interrupts with 3 vectors
>em0: allocated for 2 tx_queues
>em0: allocated for 2 rx_queues
>em0: Ethernet address: 00:25:90:11:0a:66
>em0: netmap queues/slots: TX 2/1024, RX 2/1024
>pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>em1: <Intel(R) PRO/1000 Network Connection> port 0xec00-0xec1f mem 0xfbde0000-0xfbdfffff,0xfbddc000-0xfbddffff irq 16 at device 0.0 on pci2
>em1: attach_pre capping queues at 2
>Current cap: 0x460b
>em1: using 1024 tx descriptors and 1024 rx descriptors
>em1: msix_init qsets capped at 2
>em1: pxm cpus: 4 queue msgs: 4 admincnt: 1
>em1: using 2 rx queues 2 tx queues 
>em1: Using MSIX interrupts with 3 vectors
>em1: allocated for 2 tx_queues
>em1: allocated for 2 rx_queues
>em1: Ethernet address: 00:25:90:11:0a:67
>em1: netmap queues/slots: TX 2/1024, RX 2/1024
>pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0
>pci5: <ACPI PCI bus> on pcib5
>pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
>uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xcc00-0xcc1f irq 16 at device 26.0 on pci0
>uhci0: LegSup = 0x2f00
>usbus0 on uhci0
>usbus0: 12Mbps Full Speed USB v1.0
>uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xc880-0xc89f irq 21 at device 26.1 on pci0
>uhci1: LegSup = 0x2f00
>usbus1 on uhci1
>usbus1: 12Mbps Full Speed USB v1.0
>uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xc800-0xc81f irq 19 at device 26.2 on pci0
>uhci2: LegSup = 0x2f00
>usbus2 on uhci2
>usbus2: 12Mbps Full Speed USB v1.0
>ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbeda000-0xfbeda3ff irq 18 at device 26.7 on pci0
>usbus3: EHCI version 1.0
>usbus3 on ehci0
>usbus3: 480Mbps High Speed USB v2.0
>uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xc480-0xc49f irq 23 at device 29.0 on pci0
>uhci3: LegSup = 0x2f00
>usbus4 on uhci3
>usbus4: 12Mbps Full Speed USB v1.0
>uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xc400-0xc41f irq 19 at device 29.1 on pci0
>uhci4: LegSup = 0x2f00
>usbus5 on uhci4
>usbus5: 12Mbps Full Speed USB v1.0
>uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xc080-0xc09f irq 18 at device 29.2 on pci0
>uhci5: LegSup = 0x2f00
>usbus6 on uhci5
>usbus6: 12Mbps Full Speed USB v1.0
>ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbed8000-0xfbed83ff irq 23 at device 29.7 on pci0
>usbus7: EHCI version 1.0
>usbus7 on ehci1
>usbus7: 480Mbps High Speed USB v2.0
>pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci6: <ACPI PCI bus> on pcib6
>vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfaffc000-0xfaffffff,0xfb000000-0xfb7fffff irq 17 at device 4.0 on pci6
>vgapci0: Boot video device
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>ahci0: <Intel ICH10 AHCI SATA controller> port 0xb480-0xb487,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb81f mem 0xfbed6000-0xfbed67ff irq 19 at device 31.2 on pci0
>ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich2: <AHCI channel> at channel 2 on ahci0
>ahcich3: <AHCI channel> at channel 3 on ahci0
>ahcich4: <AHCI channel> at channel 4 on ahci0
>ahcich5: <AHCI channel> at channel 5 on ahci0
>ahciem0: <AHCI enclosure management bridge> on ahci0
>ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0x400-0x41f mem 0xfbed4000-0xfbed40ff irq 18 at device 31.3 on pci0
>smbus0: <System Management Bus> on ichsmb0
>smb0: <SMBus generic I/O> on smbus0
>acpi_button0: <Power Button> on acpi0
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
>uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
>uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 flags 0x10 on acpi0
>uart2: console (115200,n,8,1)
>ipmi0: <IPMI System Interface> on isa0
>ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff pnpid ORM0000 on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
>coretemp0: <CPU On-Die Thermal Sensors> on cpu0
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
>ipmi0: IPMI device rev. 1, firmware rev. 2.06, version 2.0, device support mask 0xbf
>ipmi0: Number of channels 2
>ipmi0: Attached watchdog
>ipmi0: Establishing power cycle handler
>ugen4.1: <Intel UHCI root HUB> at usbus4
>ugen2.1: <Intel UHCI root HUB> at usbus2
>ugen6.1: <Intel UHCI root HUB> at usbus6
>ugen7.1: <Intel EHCI root HUB> at usbus7
>ugen0.1: <Intel UHCI root HUB> at usbus0
>ugen3.1: <Intel EHCI root HUB> at usbus3
>ugen1.1: <Intel UHCI root HUB> at usbus1
>ugen5.1: <Intel UHCI root HUB> at usbus5
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
>uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
>uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
>ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
>ses0: SEMB SES Device
>ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>ada0: <INTEL SSDSC2KW256G8 LHF002C> ACS-3 ATA SATA 3.x device
>ada0: Serial Number PHLA750603WT256CGN
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada0: Command Queueing enabled
>ada0: 244198MB (500118192 512 byte sectors)
>ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
>ada1: <INTEL SSDSC2KW256G8 LHF002C> ACS-3 ATA SATA 3.x device
>ada1: Serial Number PHLA750603XR256CGN
>ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada1: Command Queueing enabled
>ada1: 244198MB (500118192 512 byte sectors)
>Trying to mount root from zfs:gin/ROOT/default []...
>GEOM_MIRROR: Device mirror/swap launched (2/2).
>Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
>uhub0: 2 ports with 2 removable, self powered
>uhub5: 2 ports with 2 removable, self powered
>uhub3: 2 ports with 2 removable, self powered
>uhub1: 2 ports with 2 removable, self powered
>uhub4: 2 ports with 2 removable, self powered
>uhub7: 2 ports with 2 removable, self powered
>Root mount waiting for: usbus7 usbus3
>Root mount waiting for: usbus7 usbus3
>uhub2: 6 ports with 6 removable, self powered
>uhub6: 6 ports with 6 removable, self powered

Actions: View

Attachments on bug 234042: 200136 | 200671