Attachment 201960 Details for Bug 221376 – dmesg from boot -v with GENERIC kernel 11.2-RELEASE-p8 amd64

dmesg from boot -v with GENERIC kernel 11.2-RELEASE-p8 amd64

dmesg.boot (text/plain), 54.04 KB, created by Vladimir Druzenko on 2019-02-12 16:13:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Vladimir Druzenko

Created: 2019-02-12 16:13:41 UTC

Size: 54.04 KB

patch

obsolete

>Table 'FACP' at 0x7ffb0290
>Table 'APIC' at 0x7ffb0390
>APIC: Found table at 0x7ffb0390
>APIC: Using the MADT enumerator.
>MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
>SMP: Added CPU 1 (AP)
>Copyright (c) 1992-2018 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 11.2-RELEASE-p8 #0: Tue Jan  8 21:35:12 UTC 2019
>    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
>Table 'FACP' at 0x7ffb0290
>Table 'APIC' at 0x7ffb0390
>Table 'OEMB' at 0x7ffbe040
>Table 'MCFG' at 0x7ffb6e70
>ACPI: No SRAT table found
>PPIM 0: PA=0xa0000, VA=0xffffffff82810000, size=0x10000, mode=0
>VT(vga): resolution 640x480
>Preloaded elf kernel "/boot/kernel-11/kernel" at 0xffffffff825f2000.
>Preloaded elf obj module "/boot/kernel-11/opensolaris.ko" at 0xffffffff825faf20.
>Preloaded elf obj module "/boot/kernel-11/zfs.ko" at 0xffffffff825fb550.
>Calibrating TSC clock ... TSC clock: 3033723180 Hz
>CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3033.72-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0xf43  Family=0xf  Model=0x4  Stepping=3
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
>  AMD Features=0x20100800<SYSCALL,NX,LM>
>  TSC: P-state invariant
>Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries
>Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
>1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size
>Trace cache: 12K-uops, 8-way set associative
>2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
>L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
>real memory  = 2147483648 (2048 MB)
>Physical memory chunk(s):
>0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages)
>0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
>0x0000000002800000 - 0x000000007cc75fff, 2051497984 bytes (500854 pages)
>avail memory = 2031730688 (1937 MB)
>Event timer "LAPIC" quality 100
>LAPIC: ipi_wait() us multiplier 14 (r 21600390 tsc 3033723180)
>ACPI APIC Table: <A M I  OEMAPIC >
>Package ID shift: 1
>L2 cache ID shift: 1
>L1 cache ID shift: 1
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 2 hardware threads
>Package HW ID = 0 (0)
>		CPU0 (BSP): APIC ID: 0 (0)
>		CPU1 (AP/HT): APIC ID: 1 (0x1)
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 2
>x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
>x86bios: SSEG 0x098000-0x098fff at 0xfffffe0092776000
>x86bios: EBDA 0x09f000-0x09ffff at 0xfffff8000009f000
>x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
>Pentium Pro MTRR support enabled
>ULE: setup cpu 0
>ULE: setup cpu 1
>ACPI: RSDP 0x00000000000FB030 000024 (v02 ACPIAM)
>ACPI: XSDT 0x000000007FFB0100 000044 (v01 A M I  OEMXSDT  02000607 MSFT 00000097)
>ACPI: FACP 0x000000007FFB0290 0000F4 (v03 A M I  OEMFACP  02000607 MSFT 00000097)
>ACPI: DSDT 0x000000007FFB0400 006A67 (v01 A0070  A0070003 00000003 INTL 02002026)
>ACPI: FACS 0x000000007FFBE000 000040
>ACPI: APIC 0x000000007FFB0390 000070 (v01 A M I  OEMAPIC  02000607 MSFT 00000097)
>ACPI: OEMB 0x000000007FFBE040 000046 (v01 A M I  AMI_OEM  02000607 MSFT 00000097)
>ACPI: MCFG 0x000000007FFB6E70 00003C (v01 A M I  OEMMCFG  02000607 MSFT 00000097)
>MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
>ioapic0: ver 0x20 maxredir 0x17
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>TSC timecounter disables C2 and C3.
>SMP: passed TSC synchronization test
>TSC timecounter discards lower 1 bit(s)
>Timecounter "TSC-low" frequency 1516861590 Hz quality 1000
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>random: entropy device external interface
>wlan: <802.11 Link Layer>
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>nfslock: pseudo-device
>crypto: <crypto core>
>netmap: loaded module
>null: <full device, null device, zero device>
>module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
>io: <I/O>
>hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>hpt27xx: RocketRAID 27xx controller driver v1.2.8
>hptnr: R750/DC7280 controller driver v1.1.5
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>random: harvesting attach, 8 bytes (4 bits) from vtvga0
>random: harvesting attach, 8 bytes (4 bits) from ram0
>cryptosoft0: <software crypto> on motherboard
>crypto: assign cryptosoft0 driver id 0, flags 100663296
>crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
>random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
>acpi0: <A M I OEMXSDT> on motherboard
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: 1 ACPI AML tables successfully acquired and loaded
>PCIe: Memory Mapped configuration base @ 0xe0000000
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>acpi0: Power Button (fixed)
>acpi0: wakeup code va 0xfffffe00927f9000 pa 0x99000
>random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource0
>random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource1
>random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource2
>random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource3
>random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource4
>random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource5
>random: harvesting attach, 8 bytes (4 bits) from acpi_sysresource6
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, 7ff00000 (3) failed
>cpu0: Processor \134_PR_.CPU1 (ACPI ID 1) -> APIC ID 0
>cpu0: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF80003785C00 0002FC (v01 AMI    CPU1PM   00000001 INTL 02002026)
>cpu0: switching to generic Cx mode
>random: harvesting attach, 8 bytes (4 bits) from cpu0
>cpu1: Processor \134_PR_.CPU2 (ACPI ID 2) -> APIC ID 1
>cpu1: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>Firmware Warning (ACPI): Incorrect checksum in table [SSDT] - 0xC9, should be 0xCF (20171214/tbprint-337)
>ACPI: SSDT 0xFFFFF80003785000 0002FC (v01 AMI    CPU2PM   00000001 INTL 02002026)
>random: harvesting attach, 8 bytes (4 bits) from cpu1
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
>Event timer "i8254" frequency 1193182 Hz quality 100
>random: harvesting attach, 8 bytes (4 bits) from attimer0
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
>Event timer "RTC" frequency 32768 Hz quality 0
>random: harvesting attach, 8 bytes (4 bits) from atrtc0
>ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>random: harvesting attach, 8 bytes (4 bits) from acpi_timer0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12 14 15
>  Validation          0    5   N     0  3 4 5 6 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
>random: harvesting attach, 8 bytes (4 bits) from pci_link0
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
>random: harvesting attach, 8 bytes (4 bits) from pci_link1
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    6   N     0  3 4 5 6 7 10 11 12 14 15
>  Validation          0    6   N     0  3 4 5 6 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
>random: harvesting attach, 8 bytes (4 bits) from pci_link2
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12 14 15
>  Validation          0    5   N     0  3 4 5 6 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
>random: harvesting attach, 8 bytes (4 bits) from pci_link3
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  3 4 5 6 7 10 11 12 14 15
>  Validation          0  255   N     0  3 4 5 6 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
>random: harvesting attach, 8 bytes (4 bits) from pci_link4
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 7 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
>random: harvesting attach, 8 bytes (4 bits) from pci_link5
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    5   N     0  3 4 5 6 7 10 11 12 14 15
>  Validation          0    5   N     0  3 4 5 6 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
>random: harvesting attach, 8 bytes (4 bits) from pci_link6
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    3   N     0  3 4 5 6 7 10 11 12 14 15
>  Validation          0    3   N     0  3 4 5 6 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 10 11 12 14 15
>random: harvesting attach, 8 bytes (4 bits) from pci_link7
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 5 range 0-0xff
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0xc0000-0xdffff
>pcib0: decoding 3 range 0x80010000-0xffffffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x8086, dev=0x2580, revid=0x04
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x2581, revid=0x04
>	domain=0, bus=0, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=4 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=5
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.1.INTA
>pcib0: slot 1 INTA hardwired to IRQ 16
>	secbus=4, subbus=4
>found->	vendor=0x8086, dev=0x2668, revid=0x03
>	domain=0, bus=0, slot=27, func=0
>	class=04-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=4 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=5
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xd7cf4000, size 14, enabled
>pcib0: allocated type 3 (0xd7cf4000-0xd7cf7fff) for rid 10 of pci0:0:27:0
>pcib0: matched entry for 0.27.INTA
>pcib0: slot 27 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x2660, revid=0x03
>	domain=0, bus=0, slot=28, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=4 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=5
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTA
>pcib0: slot 28 INTA hardwired to IRQ 16
>	secbus=3, subbus=3
>found->	vendor=0x8086, dev=0x2662, revid=0x03
>	domain=0, bus=0, slot=28, func=1
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=4 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTB
>pcib0: slot 28 INTB hardwired to IRQ 17
>	secbus=2, subbus=2
>found->	vendor=0x8086, dev=0x2658, revid=0x03
>	domain=0, bus=0, slot=29, func=0
>	class=0c-03-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=3
>	map[20]: type I/O Port, range 32, base 0x7000, size  5, enabled
>pcib0: allocated type 4 (0x7000-0x701f) for rid 20 of pci0:0:29:0
>pcib0: matched entry for 0.29.INTA
>pcib0: slot 29 INTA hardwired to IRQ 23
>found->	vendor=0x8086, dev=0x2659, revid=0x03
>	domain=0, bus=0, slot=29, func=1
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=5
>	map[20]: type I/O Port, range 32, base 0x7400, size  5, enabled
>pcib0: allocated type 4 (0x7400-0x741f) for rid 20 of pci0:0:29:1
>pcib0: matched entry for 0.29.INTB
>pcib0: slot 29 INTB hardwired to IRQ 19
>found->	vendor=0x8086, dev=0x265a, revid=0x03
>	domain=0, bus=0, slot=29, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=6
>	map[20]: type I/O Port, range 32, base 0x7800, size  5, enabled
>pcib0: allocated type 4 (0x7800-0x781f) for rid 20 of pci0:0:29:2
>pcib0: matched entry for 0.29.INTC
>pcib0: slot 29 INTC hardwired to IRQ 18
>found->	vendor=0x8086, dev=0x265b, revid=0x03
>	domain=0, bus=0, slot=29, func=3
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=5
>	map[20]: type I/O Port, range 32, base 0x8000, size  5, enabled
>pcib0: allocated type 4 (0x8000-0x801f) for rid 20 of pci0:0:29:3
>pcib0: matched entry for 0.29.INTD
>pcib0: slot 29 INTD hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x265c, revid=0x03
>	domain=0, bus=0, slot=29, func=7
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=3
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 32, base 0xd7cff800, size 10, enabled
>pcib0: allocated type 3 (0xd7cff800-0xd7cffbff) for rid 10 of pci0:0:29:7
>pcib0: matched entry for 0.29.INTA
>pcib0: slot 29 INTA hardwired to IRQ 23
>found->	vendor=0x8086, dev=0x244e, revid=0xd3
>	domain=0, bus=0, slot=30, func=0
>	class=06-04-01, hdrtype=0x01, mfdev=0
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	secbus=1, subbus=1
>found->	vendor=0x8086, dev=0x2640, revid=0x03
>	domain=0, bus=0, slot=31, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x266f, revid=0x03
>	domain=0, bus=0, slot=31, func=1
>	class=01-01-8a, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
>pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
>pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
>pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
>	map[20]: type I/O Port, range 32, base 0xffa0, size  4, enabled
>pcib0: allocated type 4 (0xffa0-0xffaf) for rid 20 of pci0:0:31:1
>found->	vendor=0x8086, dev=0x2652, revid=0x03
>	domain=0, bus=0, slot=31, func=2
>	class=01-06-01, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=5
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type I/O Port, range 32, base 0x9800, size  3, enabled
>pcib0: allocated type 4 (0x9800-0x9807) for rid 10 of pci0:0:31:2
>	map[14]: type I/O Port, range 32, base 0x9400, size  2, enabled
>pcib0: allocated type 4 (0x9400-0x9403) for rid 14 of pci0:0:31:2
>	map[18]: type I/O Port, range 32, base 0x9000, size  3, enabled
>pcib0: allocated type 4 (0x9000-0x9007) for rid 18 of pci0:0:31:2
>	map[1c]: type I/O Port, range 32, base 0x8800, size  2, enabled
>pcib0: allocated type 4 (0x8800-0x8803) for rid 1c of pci0:0:31:2
>	map[20]: type I/O Port, range 32, base 0x8400, size  4, enabled
>pcib0: allocated type 4 (0x8400-0x840f) for rid 20 of pci0:0:31:2
>	map[24]: type Memory, range 32, base 0xd7cffc00, size 10, enabled
>pcib0: allocated type 3 (0xd7cffc00-0xd7cfffff) for rid 24 of pci0:0:31:2
>pcib0: matched entry for 0.31.INTB
>pcib0: slot 31 INTB hardwired to IRQ 19
>found->	vendor=0x8086, dev=0x266a, revid=0x03
>	domain=0, bus=0, slot=31, func=3
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=255
>	map[20]: type I/O Port, range 32, base 0x400, size  5, enabled
>pcib0: allocated type 4 (0x400-0x41f) for rid 20 of pci0:0:31:3
>random: harvesting attach, 8 bytes (4 bits) from hostb0
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
>pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib1
>pcib0: allocated type 3 (0xd7f00000-0xd7ffffff) for rid 20 of pcib1
>pcib0: allocated type 3 (0xd8000000-0xdfffffff) for rid 24 of pcib1
>pcib1:   domain            0
>pcib1:   secondary bus     4
>pcib1:   subordinate bus   4
>pcib1:   I/O decode        0xe000-0xefff
>pcib1:   memory decode     0xd7f00000-0xd7ffffff
>pcib1:   prefetched decode 0xd8000000-0xdfffffff
>pcib1:   special decode    VGA
>pci1: <ACPI PCI bus> on pcib1
>pcib1: allocated bus range (4-4) for rid 0 of pci1
>pci1: domain=0, physical bus=4
>found->	vendor=0x1002, dev=0x5b60, revid=0x00
>	domain=0, bus=4, slot=0, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=5
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Prefetchable Memory, range 32, base 0xd8000000, size 27, enabled
>pcib1: allocated prefetch range (0xd8000000-0xdfffffff) for rid 10 of pci0:4:0:0
>	map[14]: type I/O Port, range 32, base 0xe000, size  8, enabled
>pcib1: allocated I/O port range (0xe000-0xe0ff) for rid 14 of pci0:4:0:0
>	map[18]: type Memory, range 32, base 0xd7fe0000, size 16, enabled
>pcib1: allocated memory range (0xd7fe0000-0xd7feffff) for rid 18 of pci0:4:0:0
>pcib1: matched entry for 4.0.INTA
>pcib1: slot 0 INTA hardwired to IRQ 16
>found->	vendor=0x1002, dev=0x5b70, revid=0x00
>	domain=0, bus=4, slot=0, func=1
>	class=03-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0xd7ff0000, size 16, enabled
>pcib1: allocated memory range (0xd7ff0000-0xd7ffffff) for rid 10 of pci0:4:0:1
>vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd8000000-0xdfffffff,0xd7fe0000-0xd7feffff irq 16 at device 0.0 on pci1
>vgapci0: Boot video device
>random: harvesting attach, 8 bytes (4 bits) from vgapci0
>vgapci1: <VGA-compatible display> mem 0xd7ff0000-0xd7ffffff at device 0.1 on pci1
>random: harvesting attach, 8 bytes (4 bits) from vgapci1
>random: harvesting attach, 8 bytes (4 bits) from pci1
>random: harvesting attach, 8 bytes (4 bits) from pcib1
>hdac0: <Intel 82801F HDA Controller> mem 0xd7cf4000-0xd7cf7fff irq 16 at device 27.0 on pci0
>hdac0: PCI card vendor: 0x1043, device: 0x813d
>hdac0: HDA Driver Revision: 20120126_0002
>hdac0: Config options: on=0x00000000 off=0x00000000
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51
>hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
>random: harvesting attach, 8 bytes (4 bits) from hdac0
>pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>pcib2: allocating non-ISA range 0xd000-0xd0ff
>pcib0: allocated type 4 (0xd000-0xd0ff) for rid 1c of pcib2
>pcib2: allocating non-ISA range 0xd400-0xd4ff
>pcib0: allocated type 4 (0xd400-0xd4ff) for rid 1c of pcib2
>pcib2: allocating non-ISA range 0xd800-0xd8ff
>pcib0: allocated type 4 (0xd800-0xd8ff) for rid 1c of pcib2
>pcib2: allocating non-ISA range 0xdc00-0xdcff
>pcib0: allocated type 4 (0xdc00-0xdcff) for rid 1c of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     3
>pcib2:   subordinate bus   3
>pcib2:   I/O decode        0xd000-0xdfff
>pcib2:   special decode    ISA
>pci2: <ACPI PCI bus> on pcib2
>pcib2: allocated bus range (3-3) for rid 0 of pci2
>pci2: domain=0, physical bus=3
>random: harvesting attach, 8 bytes (4 bits) from pci2
>random: harvesting attach, 8 bytes (4 bits) from pcib2
>pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
>pcib3: allocating non-ISA range 0xc000-0xc0ff
>pcib0: allocated type 4 (0xc000-0xc0ff) for rid 1c of pcib3
>pcib3: allocating non-ISA range 0xc400-0xc4ff
>pcib0: allocated type 4 (0xc400-0xc4ff) for rid 1c of pcib3
>pcib3: allocating non-ISA range 0xc800-0xc8ff
>pcib0: allocated type 4 (0xc800-0xc8ff) for rid 1c of pcib3
>pcib3: allocating non-ISA range 0xcc00-0xccff
>pcib0: allocated type 4 (0xcc00-0xccff) for rid 1c of pcib3
>pcib0: allocated type 3 (0xd7e00000-0xd7efffff) for rid 20 of pcib3
>pcib3:   domain            0
>pcib3:   secondary bus     2
>pcib3:   subordinate bus   2
>pcib3:   I/O decode        0xc000-0xcfff
>pcib3:   memory decode     0xd7e00000-0xd7efffff
>pcib3:   special decode    ISA
>pci3: <ACPI PCI bus> on pcib3
>pcib3: allocated bus range (2-2) for rid 0 of pci3
>pci3: domain=0, physical bus=2
>found->	vendor=0x11ab, dev=0x4362, revid=0x15
>	domain=0, bus=2, slot=0, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x4010, cachelnsz=4 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	MSI supports 2 messages, 64 bit
>	map[10]: type Memory, range 64, base 0xd7efc000, size 14, enabled
>pcib3: allocated memory range (0xd7efc000-0xd7efffff) for rid 10 of pci0:2:0:0
>	map[18]: type I/O Port, range 32, base 0xc800, size  8, enabled
>pcib3: allocated I/O port range (0xc800-0xc8ff) for rid 18 of pci0:2:0:0
>pcib3: matched entry for 2.0.INTA
>pcib3: slot 0 INTA hardwired to IRQ 17
>mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xd7efc000-0xd7efffff irq 17 at device 0.0 on pci3
>mskc0: MSI count : 0
>mskc0: RAM buffer size : 48KB
>mskc0: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff)
>mskc0: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff)
>msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x01> on mskc0
>msk0: Using defaults for TSO: 65518/35/2048
>msk0: bpf attached
>msk0: Ethernet address: 00:11:d8:4a:cd:c4
>miibus0: <MII bus> on msk0
>e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
>e1000phy0: OUI 0x000ac2, model 0x000c, rev. 2
>e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>random: harvesting attach, 8 bytes (4 bits) from e1000phy0
>random: harvesting attach, 8 bytes (4 bits) from miibus0
>random: harvesting attach, 8 bytes (4 bits) from msk0
>ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52
>random: harvesting attach, 8 bytes (4 bits) from mskc0
>random: harvesting attach, 8 bytes (4 bits) from pci3
>random: harvesting attach, 8 bytes (4 bits) from pcib3
>uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x7000-0x701f irq 23 at device 29.0 on pci0
>ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53
>uhci0: LegSup = 0x2f00
>usbus0 on uhci0
>uhci0: usbpf: Attached
>random: harvesting attach, 8 bytes (4 bits) from usbus0
>usbus0: random: harvesting attach, 8 bytes (4 bits) from uhci0
>12Mbps Full Speed USB v1.0
>uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x7400-0x741f irq 19 at device 29.1 on pci0
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54
>uhci1: LegSup = 0x2f00
>usbus1 on uhci1
>uhci1: usbpf: Attached
>random: harvesting attach, 8 bytes (4 bits) from usbus1
>usbus1: random: harvesting attach, 8 bytes (4 bits) from uhci1
>12Mbps Full Speed USB v1.0
>uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x7800-0x781f irq 18 at device 29.2 on pci0
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 55
>uhci2: LegSup = 0x2f00
>usbus2 on uhci2
>uhci2: usbpf: Attached
>random: harvesting attach, 8 bytes (4 bits) from usbus2
>usbus2: random: harvesting attach, 8 bytes (4 bits) from uhci2
>12Mbps Full Speed USB v1.0
>uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x8000-0x801f irq 16 at device 29.3 on pci0
>uhci3: LegSup = 0x2f00
>usbus3 on uhci3
>uhci3: usbpf: Attached
>random: harvesting attach, 8 bytes (4 bits) from usbus3
>usbus3: random: harvesting attach, 8 bytes (4 bits) from uhci3
>12Mbps Full Speed USB v1.0
>ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd7cff800-0xd7cffbff irq 23 at device 29.7 on pci0
>usbus4: EHCI version 1.0
>usbus4 on ehci0
>ehci0: usbpf: Attached
>random: harvesting attach, 8 bytes (4 bits) from usbus4
>usbus4: random: harvesting attach, 8 bytes (4 bits) from ehci0
>480Mbps High Speed USB v2.0
>pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pcib4: allocating non-ISA range 0xa000-0xa0ff
>pcib0: allocated type 4 (0xa000-0xa0ff) for rid 1c of pcib4
>pcib4: allocating non-ISA range 0xa400-0xa4ff
>pcib0: allocated type 4 (0xa400-0xa4ff) for rid 1c of pcib4
>pcib4: allocating non-ISA range 0xa800-0xa8ff
>pcib0: allocated type 4 (0xa800-0xa8ff) for rid 1c of pcib4
>pcib4: allocating non-ISA range 0xac00-0xacff
>pcib0: allocated type 4 (0xac00-0xacff) for rid 1c of pcib4
>pcib4: allocating non-ISA range 0xb000-0xb0ff
>pcib0: allocated type 4 (0xb000-0xb0ff) for rid 1c of pcib4
>pcib4: allocating non-ISA range 0xb400-0xb4ff
>pcib0: allocated type 4 (0xb400-0xb4ff) for rid 1c of pcib4
>pcib4: allocating non-ISA range 0xb800-0xb8ff
>pcib0: allocated type 4 (0xb800-0xb8ff) for rid 1c of pcib4
>pcib4: allocating non-ISA range 0xbc00-0xbcff
>pcib0: allocated type 4 (0xbc00-0xbcff) for rid 1c of pcib4
>pcib0: allocated type 3 (0xd7d00000-0xd7dfffff) for rid 20 of pcib4
>pcib4:   domain            0
>pcib4:   secondary bus     1
>pcib4:   subordinate bus   1
>pcib4:   I/O decode        0xa000-0xbfff
>pcib4:   memory decode     0xd7d00000-0xd7dfffff
>pcib4:   special decode    ISA, subtractive
>pci4: <ACPI PCI bus> on pcib4
>pcib4: allocated bus range (1-1) for rid 0 of pci4
>pci4: domain=0, physical bus=1
>found->	vendor=0x104c, dev=0x8023, revid=0x00
>	domain=0, bus=1, slot=3, func=0
>	class=0c-00-10, hdrtype=0x00, mfdev=0
>	cmdreg=0x0016, statreg=0x0210, cachelnsz=4 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0xd7dff000, size 11, enabled
>pcib4: allocated memory range (0xd7dff000-0xd7dff7ff) for rid 10 of pci0:1:3:0
>	map[14]: type Memory, range 32, base 0xd7df8000, size 14, enabled
>pcib4: allocated memory range (0xd7df8000-0xd7dfbfff) for rid 14 of pci0:1:3:0
>pcib4: matched entry for 1.3.INTA
>pcib4: slot 3 INTA hardwired to IRQ 21
>found->	vendor=0x1095, dev=0x3114, revid=0x02
>	domain=0, bus=1, slot=5, func=0
>	class=01-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x02b0, cachelnsz=4 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=5
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type I/O Port, range 32, base 0xb800, size  3, enabled
>pcib4: allocated I/O port range (0xb800-0xb807) for rid 10 of pci0:1:5:0
>	map[14]: type I/O Port, range 32, base 0xb400, size  2, enabled
>pcib4: allocated I/O port range (0xb400-0xb403) for rid 14 of pci0:1:5:0
>	map[18]: type I/O Port, range 32, base 0xb000, size  3, enabled
>pcib4: allocated I/O port range (0xb000-0xb007) for rid 18 of pci0:1:5:0
>	map[1c]: type I/O Port, range 32, base 0xa800, size  2, enabled
>pcib4: allocated I/O port range (0xa800-0xa803) for rid 1c of pci0:1:5:0
>	map[20]: type I/O Port, range 32, base 0xa400, size  4, enabled
>pcib4: allocated I/O port range (0xa400-0xa40f) for rid 20 of pci0:1:5:0
>	map[24]: type Memory, range 32, base 0xd7dffc00, size 10, enabled
>pcib4: allocated memory range (0xd7dffc00-0xd7dfffff) for rid 24 of pci0:1:5:0
>pcib4: matched entry for 1.5.INTA
>pcib4: slot 5 INTA hardwired to IRQ 22
>pci4: <serial bus, FireWire> at device 3.0 (no driver attached)
>atapci0: <SiI 3114 SATA150 controller> port 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xa800-0xa803,0xa400-0xa40f mem 0xd7dffc00-0xd7dfffff irq 22 at device 5.0 on pci4
>ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 56
>ata2: <ATA channel> at channel 0 on atapci0
>random: harvesting attach, 8 bytes (4 bits) from ata2
>ata2: CONNECT requested
>ata3: ata2: <ATA channel> at channel 1 on atapci0
>SATA connect time=0ms status=00000113
>ata2: reset tp1 mask=01 ostat0=50 ostat1=00
>random: harvesting attach, 8 bytes (4 bits) from ata3
>ata4: <ATA channel> at channel 2 on atapci0
>random: harvesting attach, 8 bytes (4 bits) from ata4
>ata5: <ATA channel> at channel 3 on atapci0
>random: harvesting attach, 8 bytes (4 bits) from ata5
>random: harvesting attach, 8 bytes (4 bits) from atapci0
>random: harvesting attach, 8 bytes (4 bits) from pci4
>random: harvesting attach, 8 bytes (4 bits) from pcib4
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>random: harvesting attach, 8 bytes (4 bits) from isa0
>random: harvesting attach, 8 bytes (4 bits) from isab0
>ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
>ata2: reset tp2 stat0=50 stat1=00 devices=0x1
>(noperiph:ata2:0:-1:ffffffff): rescan already queued
>ata3: CONNECT requested
>ata4: CONNECT requested
>ata5: CONNECT requested
>ata3: SATA connect time=0ms status=00000113
>ata3: reset tp1 mask=01 ostat0=50 ostat1=00
>atapci1: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
>ata0: <ATA channel> at channel 0 on atapci1
>ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 57
>random: harvesting attach, 8 bytes (4 bits) from ata0
>ata1: <ATA channel> at channel 1 on atapci1
>ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 58
>random: harvesting attach, 8 bytes (4 bits) from ata1
>random: harvesting attach, 8 bytes (4 bits) from atapci1
>ahci0: <Intel ICH6 AHCI SATA controller> port 0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f mem 0xd7cffc00-0xd7cfffff irq 19 at device 31.2 on pci0
>ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
>ahci0: ata3: reset tp2 stat0=50 stat1=00 devices=0x1
>(noperiph:ata3:0:-1:ffffffff): rescan already queued
>ata4: AHCI v1.00 with 4 1.5Gbps ports, Port Multiplier not supported
>ahci0: quirks=0x1<NOFORCE>
>ahci0: Caps: 64bit NCQ ALP AL 1.5Gbps SSC PSC 32cmd 4ports
>SATA connect time=0ms status=00000113
>ahcich0: ata4: reset tp1 mask=01 ostat0=50 ostat1=00
><AHCI channel> at channel 0 on ahci0
>ahcich0: Caps:
>random: harvesting attach, 8 bytes (4 bits) from ahcich0
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich1: Caps:
>random: harvesting attach, 8 bytes (4 bits) from ahcich1
>ahcich2: <AHCI channel> at channel 2 on ahci0
>ahcich2: Caps:
>random: harvesting attach, 8 bytes (4 bits) from ahcich2
>ahcich3: <AHCI channel> at channel 3 on ahci0
>ahcich3: Caps:
>random: harvesting attach, 8 bytes (4 bits) from ahcich3
>random: harvesting attach, 8 bytes (4 bits) from ahci0
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>random: harvesting attach, 8 bytes (4 bits) from pci0
>random: harvesting attach, 8 bytes (4 bits) from pcib0
>ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
>acpi_button0: ata4: reset tp2 stat0=50 stat1=00 devices=0x1
>(noperiph:ata4:0:-1:ffffffff): rescan already queued
>ata5: SATA connect time=0ms status=00000113
>ata5: <Power Button> on acpi0
>random: harvesting attach, 8 bytes (4 bits) from acpi_button0
>reset tp1 mask=01 ostat0=50 ostat1=00
>random: harvesting attach, 8 bytes (4 bits) from atdma0
>random: harvesting attach, 8 bytes (4 bits) from fpupnp0
>ppc0: using extended I/O port range
>ppc0: SPP ECP  ECP+EPP
>ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/9 bytes threshold
>ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 59
>ppbus0: <Parallel port bus> on ppc0
>ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
>ata5: reset tp2 stat0=50 stat1=00 devices=0x1
>(noperiph:ata5:0:-1:ffffffff): rescan already queued
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>random: harvesting attach, 8 bytes (4 bits) from lpt0
>ppi0: <Parallel I/O> on ppbus0
>random: harvesting attach, 8 bytes (4 bits) from ppi0
>random: harvesting attach, 8 bytes (4 bits) from ppbus0
>random: harvesting attach, 8 bytes (4 bits) from ppc0
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60
>uart0: fast interrupt
>uart0: PPS capture mode: DCDinvalid
>random: harvesting attach, 8 bytes (4 bits) from uart0
>random: harvesting attach, 8 bytes (4 bits) from acpi0
>random: harvesting attach, 8 bytes (4 bits) from apic0
>random: harvesting attach, 8 bytes (4 bits) from nexus0
>ahc_isa_identify 0: ioport 0xc00 alloc failed
>ahc_isa_identify 1: ioport 0x1c00 alloc failed
>ahc_isa_identify 2: ioport 0x2c00 alloc failed
>ahc_isa_identify 3: ioport 0x3c00 alloc failed
>ahc_isa_identify 4: ioport 0x4c00 alloc failed
>ahc_isa_identify 5: ioport 0x5c00 alloc failed
>ahc_isa_identify 6: ioport 0x6c00 alloc failed
>ahc_isa_identify 7: ioport 0x7c00 alloc failed
>ahc_isa_identify 8: ioport 0x8c00 alloc failed
>ahc_isa_identify 9: ioport 0x9c00 alloc failed
>ahc_isa_identify 10: ioport 0xac00 alloc failed
>ahc_isa_identify 11: ioport 0xbc00 alloc failed
>ahc_isa_identify 12: ioport 0xcc00 alloc failed
>ahc_isa_identify 13: ioport 0xdc00 alloc failed
>ahc_isa_identify 14: ioport 0xec00 alloc failed
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc0000-0xcffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd0000-0xd47ff) for rid 1 of orm0
>pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 2 of orm0
>pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 2 of orm0
>pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 2 of orm0
>pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 2 of orm0
>pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 2 of orm0
>pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 2 of orm0
>pcib0: allocated type 3 (0xda000-0xda7ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xda800-0xdafff) for rid 2 of orm0
>pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 2 of orm0
>pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 2 of orm0
>pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xdd800-0xddfff) for rid 2 of orm0
>pcib0: allocated type 3 (0xde000-0xde7ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xde800-0xdefff) for rid 2 of orm0
>pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 2 of orm0
>pcib0: allocated type 3 (0xdf800-0xdffff) for rid 2 of orm0
>isa_probe_children: disabling PnP devices
>atrtc: atrtc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>ppc: ppc0 already exists; skipping it
>sc: sc0 already exists; skipping it
>uart: uart0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd47ff on isa0
>random: harvesting attach, 8 bytes (4 bits) from orm0
>sc0 failed to probe on isa0
>vga0 failed to probe on isa0
>pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
>pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
>pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 61
>atkbd0: [GIANT-LOCKED]
>random: harvesting attach, 8 bytes (4 bits) from atkbd0
>psm0: unable to allocate IRQ
>random: harvesting attach, 8 bytes (4 bits) from atkbdc0
>pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
>pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1
>uart1 failed to probe at port 0x2f8 irq 3 on isa0
>isa_probe_children: probing PnP devices
>AcpiOsExecute: task queue not started
>random: harvesting attach, 8 bytes (4 bits) from acpi_perf0
>AcpiOsExecute: task queue not started
>random: harvesting attach, 8 bytes (4 bits) from acpi_perf1
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>random: harvesting attach, 8 bytes (4 bits) from cpufreq0
>random: harvesting attach, 8 bytes (4 bits) from est0
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>random: harvesting attach, 8 bytes (4 bits) from cpufreq1
>random: harvesting attach, 8 bytes (4 bits) from est1
>Device configuration finished.
>procfs registered
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>lapic: Divisor 2, Frequency 101124132 Hz
>Timecounters tick every 1.000 msec
>lo0: bpf attached
>vlan: initialized, using hash tables with chaining
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
>IPsec: Initialized Security Association Processing.
>AcpiOsExecute: enqueue 2 pending tasks
>hptrr: no controller detected.
>hpt27xx: no controller detected.
>hptnr: no controller detected.
>hdacc0: <CMedia CMI9880 HDA CODEC> at cad 0 on hdac0
>hdaa0: <CMedia CMI9880 Audio Function Group> at nid 1 on hdacc0
>hdaa0: Subsystem ID: 0x813d1043
>hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
>hdaa0: Original pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0: 11 01014010 1  0  Line-out      Jack  1/8     Rear       Green   0
>hdaa0: 12 01813000 0  0  Line-in       Jack  1/8     Rear       Blue    0
>hdaa0: 13 01a19000 0  0  Mic           Jack  1/8     Rear       Pink    0
>hdaa0: 14 01011014 1  4  Line-out      Jack  1/8     Rear       Black   0
>hdaa0: 15 02214000 0  0  Headphones    Jack  1/8     Front      Green   0
>hdaa0: 16 02a19000 0  0  Mic           Jack  1/8     Front      Pink    0
>hdaa0: 17 19330000 0  0  CD            Jack  ATAPI   Onboard    Unknown 0
>hdaa0: 18 01450000 0  0  SPDIF-out     Jack  Optical Rear       Unknown 0
>hdaa0: 19 41150000 0  0  Speaker       None  Optical Rear       Unknown 0
>hdaa0: 31 01016012 1  2  Line-out      Jack  1/8     Rear       Orange  0
>hdaa0: 32 01012016 1  6  Line-out      Jack  1/8     Rear       Grey    0
>hdaa0: Patched pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0: 11 01014010 1  0  Line-out      Jack  1/8     Rear       Green   0
>hdaa0: 12 01813000 0  0  Line-in       Jack  1/8     Rear       Blue    0 DISA
>hdaa0: 13 01a19000 0  0  Mic           Jack  1/8     Rear       Pink    0 DISA
>hdaa0: 14 01011014 1  4  Line-out      Jack  1/8     Rear       Black   0
>hdaa0: 15 02214000 0  0  Headphones    Jack  1/8     Front      Green   0 DISA
>hdaa0: 16 02a19000 0  0  Mic           Jack  1/8     Front      Pink    0 DISA
>hdaa0: 17 19330000 0  0  CD            Jack  ATAPI   Onboard    Unknown 0 DISA
>hdaa0: 18 01450000 0  0  SPDIF-out     Jack  Optical Rear       Unknown 0 DISA
>hdaa0: 19 41150000 0  0  Speaker       None  Optical Rear       Unknown 0 DISA
>hdaa0: 31 01016012 1  2  Line-out      Jack  1/8     Rear       Orange  0
>hdaa0: 32 01012016 1  6  Line-out      Jack  1/8     Rear       Grey    0
>hdaa0: 1 associations found:
>hdaa0: Association 0 (1) out:
>hdaa0:  Pin nid=11 seq=0
>hdaa0:  Pin nid=31 seq=2
>hdaa0:  Pin nid=14 seq=4
>hdaa0:  Pin nid=32 seq=6
>hdaa0: Tracing association 0 (1)
>hdaa0:  Pin 11 traced to DAC 3
>hdaa0:  Pin 31 traced to DAC 4
>hdaa0:  Pin 14 traced to DAC 6
>hdaa0:  Pin 32 traced to DAC 5
>hdaa0: Association 0 (1) trace succeeded
>hdaa0: Looking for additional DAC for association 0 (1)
>hdaa0: Tracing input monitor
>hdaa0: Tracing other input monitors
>hdaa0: Tracing beeper
>hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>pcm0: <CMedia CMI9880 (Rear Analog 8ch Line-out)> at nid 11,31,14,32 on hdaa0
>pcm0: Playback:
>pcm0:      Stream cap: 0x00000001 PCM
>pcm0:         PCM cap: 0x000e0540 16 20 24 bits, 48 96 192 KHz
>pcm0:             DAC: 3 4 6 5
>pcm0: 
>pcm0:     nid=11 [pin: Line-out (Green Jack)]
>pcm0:       + <- nid=3 [audio output] [src: pcm]
>pcm0: 
>pcm0:     nid=31 [pin: Line-out (Orange Jack)]
>pcm0:       + <- nid=4 [audio output] [src: pcm]
>pcm0: 
>pcm0:     nid=14 [pin: Line-out (Black Jack)]
>pcm0:       + <- nid=6 [audio output] [src: pcm]
>pcm0: 
>pcm0:     nid=32 [pin: Line-out (Grey Jack)]
>pcm0:       + <- nid=5 [audio output] [src: pcm]
>pcm0: 
>pcm0: Master Volume (OSS: vol): 0/0dB
>pcm0:    +- ctl  1 (nid   3 out):    mute
>pcm0:    +- ctl  2 (nid   4 out):    mute
>pcm0:    +- ctl  3 (nid   5 out):    mute
>pcm0:    +- ctl  4 (nid   6 out):    mute
>pcm0: 
>pcm0: PCM Volume (OSS: pcm): 0/0dB
>pcm0:    +- ctl  1 (nid   3 out):    mute
>pcm0:    +- ctl  2 (nid   4 out):    mute
>pcm0:    +- ctl  3 (nid   5 out):    mute
>pcm0:    +- ctl  4 (nid   6 out):    mute
>pcm0: 
>pcm0: Speaker/Beep Volume (OSS: speaker): -45/0dB
>pcm0:    +- ctl  8 (nid  35 out):    -45/0dB (16 steps) + mute
>pcm0: 
>pcm0: Mixer "vol":
>pcm0: Mixer "pcm":
>pcm0: Mixer "speaker":
>pcm0: Mixer "ogain":
>pcm0: Soft PCM mixer ENABLED
>pcm0: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
>random: harvesting attach, 8 bytes (4 bits) from pcm0
>random: harvesting attach, 8 bytes (4 bits) from hdaa0
>ata0: random: harvesting attach, 8 bytes (4 bits) from hdacc0
>ugen4.1: <Intel EHCI root HUB> at usbus4
>reset tp1 mask=03 ostat0=50 ostat1=7f
>uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
>ugen3.1: <Intel UHCI root HUB> at usbus3
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>ugen0.1: <Intel UHCI root HUB> at usbus0
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen2.1: <Intel UHCI root HUB> at usbus2
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen1.1: <Intel UHCI root HUB> at usbus1
>uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>(aprobe0:ata2:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00
>(aprobe0:ata2:0:0:0): CAM status: ATA Status Error
>(aprobe0:ata2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe0:ata2:0:0:0): RES: 51 04 01 00 00 00 00 00 00 01 00
>(aprobe0:ata2:0:0:0): Retrying command
>(aprobe1:ata3:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe1:ata3:0:0:0): CAM status: ATA Status Error
>(aprobe1:ata3:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe1:ata3:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe1:ata3:0:0:0): Retrying command
>(aprobe3:ata5:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe3:ata5:0:0:0): CAM status: ATA Status Error
>(aprobe3:ata5:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe3:ata5:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe3:ata5:0:0:0): Retrying command
>(aprobe2:ata4:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe2:ata4:0:0:0): CAM status: ATA Status Error
>ata0: (aprobe2:ata4:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe2:ata4:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe2:ata4:0:0:0): Retrying command
>(aprobe1:ata3:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>stat0=0x50 err=0x01 lsb=0x14 msb=0xeb
>(aprobe1:ata3:0:0:0): CAM status: ATA Status Error
>ata0: (aprobe1:ata3:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe1:ata3:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>stat1=0x00 err=0x00 lsb=0x7f msb=0x7f
>ata0: reset tp2 stat0=50 stat1=00 devices=0x10000
>ata1: (aprobe1:ata3:0:0:0): Error 5, Retries exhausted
>(aprobe3:ata5:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>reset tp1 mask=03 ostat0=7f ostat1=7f
>(aprobe3:ata5:0:0:0): CAM status: ATA Status Error
>(aprobe3:ata5:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe3:ata5:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe3:ata5:0:0:0): Error 5, Retries exhausted
>(aprobe2:ata4:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe2:ata4:0:0:0): CAM status: ATA Status Error
>(aprobe2:ata4:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe2:ata4:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe2:ata4:0:0:0): Error 5, Retries exhausted
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>uhub2: 2 ports with 2 removable, self powered
>random: harvesting attach, 8 bytes (4 bits) from uhub2
>uhub1: 2 ports with 2 removable, self powered
>random: harvesting attach, 8 bytes (4 bits) from uhub1
>uhub4: 2 ports with 2 removable, self powered
>random: harvesting attach, 8 bytes (4 bits) from uhub4
>uhub3: 2 ports with 2 removable, self powered
>random: harvesting attach, 8 bytes (4 bits) from uhub3
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
>ata1: reset tp2 stat0=ff stat1=ff devices=0x0
>ahcich0: AHCI reset...
>ahcich0: SATA connect time=100us status=00000113
>ahcich0: AHCI reset: device found
>ahcich1: AHCI reset...
>ahcich1: SATA connect time=100us status=00000113
>ahcich1: AHCI reset: device found
>ahcich2: AHCI reset...
>ahcich2: SATA connect time=100us status=00000113
>ahcich2: AHCI reset: device found
>ahcich3: AHCI reset...
>ahcich3: SATA connect timeout time=10000us status=00000000
>ahcich3: AHCI reset: device not found
>ahcich0: AHCI reset: device ready after 100ms
>ahcich1: AHCI reset: device ready after 100ms
>ahcich2: AHCI reset: device ready after 100ms
>uhub0: 8 ports with 8 removable, self powered
>random: harvesting attach, 8 bytes (4 bits) from uhub0
>ugen0.2: <No brand KVM> at usbus0
>ukbd0 on uhub2
>ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus0
>kbd2 at ukbd0
>kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
>random: harvesting attach, 8 bytes (4 bits) from ukbd0
>ata2: (aprobe0:ata2:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00
>SATA connect time=0ms status=00000113
>(aprobe0:ata2:0:0:0): CAM status: Command timeout
>(aprobe0:ata2: ata2:0:0:0): Error 5, Retries exhausted
>reset tp1 mask=01 ostat0=d1 ostat1=00
>pass0 at ata3 bus 0 scbus1 target 0 lun 0
>pass0: <WDC WD1600JD-00GBB0 02.05D02> ATA-6 SATA 1.x device
>pass0: Serial Number WD-WMAES4016929
>pass0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>pass1 at ata4 bus 0 scbus2 target 0 lun 0
>pass1: <WDC WD1600JD-00GBB0 02.05D02> ATA-6 SATA 1.x device
>pass1: Serial Number WD-WMAES4016412
>pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>pass2 at ata5 bus 0 scbus3 target 0 lun 0
>pass2: <WDC WD1600JD-00GBB0 02.05D02> ATA-6 SATA 1.x device
>pass2: Serial Number WD-WMAES4017066
>pass2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>pass3 at ata0 bus 0 scbus4 target 0 lun 0
>pass3: <ASUS DVD-E616P2 1.04> Removable CD-ROM SCSI device
>pass3: 100.000MB/s transfers (UDMA5, ATAPI 12bytes, PIO 65534bytes)
>pass4 at ahcich0 bus 0 scbus6 target 0 lun 0
>pass4: <SAMSUNG HD501LJ CR100-12> ATA8-ACS SATA 2.x device
>pass4: Serial Number S0MUJ1DQ112326
>pass4: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
>pass4: Command Queueing enabled
>pass5 at ahcich1 bus 0 scbus7 target 0 lun 0
>pass5: <SAMSUNG HD501LJ CR100-12> ATA8-ACS SATA 2.x device
>pass5: Serial Number S0MUJ1DQ112329
>pass5: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
>pass5: Command Queueing enabled
>pass6 at ahcich2 bus 0 scbus8 target 0 lun 0
>pass6: <WDC WD15EADS-00P8B0 01.00A01> ATA8-ACS SATA 2.x device
>pass6: Serial Number WD-WMAVU0521803
>pass6: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
>pass6: Command Queueing enabled
>ada0 at ata3 bus 0 scbus1 target 0 lun 0
>ada0: <WDC WD1600JD-00GBB0 02.05D02> ATA-6 SATA 1.x device
>ada0: Serial Number WD-WMAES4016929
>ata2: ada0: 150.000MB/s transfersstat0=0x50 err=0x01 lsb=0x00 msb=0x00
>cd0 at ata0 bus 0 scbus4 target 0 lun 0
>ata2: reset tp2 stat0=50 stat1=00 devices=0x1
>GEOM: new disk cd0
>cd0: <ASUS DVD-E616P2 1.04> Removable CD-ROM SCSI device
>cd0: 100.000MB/s transfers (UDMA5, ATAPI 12bytes, PIO 65534bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>GEOM: new disk ada0
> (SATA 1.x, UDMA5, PIO 8192bytes)
>ada0: 152627MB (312581808 512 byte sectors)
>ada1 at ata4 bus 0 scbus2 target 0 lun 0
>ada1: <WDC WD1600JD-00GBB0 02.05D02> ATA-6 SATA 1.x device
>ada1: Serial Number WD-WMAES4016412
>ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>ada1: 152627MB (312581808 512 byte sectors)
>ada2 at ata5 bus 0 scbus3 target 0 lun 0
>ada2: <WDC WD1600JD-00GBB0 02.05D02> ATA-6 SATA 1.x device
>ada2: Serial Number WD-WMAES4017066
>ada2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>ada2: 152627MB (312581808 512 byte sectors)
>ada3 at ahcich0 bus 0 scbus6 target 0 lun 0
>ada3: <SAMSUNG HD501LJ CR100-12> ATA8-ACS SATA 2.x device
>ada3: Serial Number S0MUJ1DQ112326
>ada3: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
>ada3: Command Queueing enabled
>ada3: 476940MB (976773168 512 byte sectors)
>ada3: quirks=0x4<LOG_BROKEN>
>ada4 at ahcich1 bus 0 scbus7 target 0 lun 0
>ada4: <SAMSUNG HD501LJ CR100-12> ATA8-ACS SATA 2.x device
>ada4: Serial Number S0MUJ1DQ112329
>ada4: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
>ada4: Command Queueing enabled
>ada4: 476940MB (976773168 512 byte sectors)
>GEOM: new disk ada1
>ada4: quirks=0x4<LOG_BROKEN>
>ada5 at ahcich2 bus 0 scbus8 target 0 lun 0
>GEOM: new disk ada2
>ada5: GEOM: new disk ada3
><WDC WD15EADS-00P8B0 01.00A01> ATA8-ACS SATA 2.x device
>ada5: Serial Number WD-WMAVU0521803
>ada5: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
>ada5: Command Queueing enabled
>ada5: 1430799MB (2930277168 512 byte sectors)
>GEOM: new disk ada4
>Trying to mount root from zfs:zroot/ROOT/default []...
>GEOM: new disk ada5
>atrtc0: providing initial system time
>start_init: trying /sbin/init
>random: unblocking device.
>msk0: link state changed to DOWN
>Accounting enabled
>msk0: link state changed to UP

Actions: View

Attachments on bug 221376: 185211 | 185212 | 201960 | 201961