Attachment 202163 Details for Bug 235864 – net/ndproxy port contents

net/ndproxy port contents

ndproxy-v3.2.shar (text/plain), 6.00 KB, created by Alexandre Fenyo on 2019-02-19 17:42:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexandre Fenyo

Created: 2019-02-19 17:42:44 UTC

Size: 6.00 KB

patch

obsolete

># This is a shell archive.  Save it in a file, remove anything before
># this line, and then unpack it by entering "sh file".  Note, it may
># create directories; files and directories will be owned by you and
># have default permissions.
>#
># This archive contains:
>#
>#	.
>#	./ndproxy
>#	./ndproxy/pkg-descr
>#	./ndproxy/files
>#	./ndproxy/files/ndproxy.in
>#	./ndproxy/files/pkg-message.in
>#	./ndproxy/distinfo
>#	./ndproxy/Makefile
>#
>echo c - .
>mkdir -p . > /dev/null 2>&1
>echo c - ./ndproxy
>mkdir -p ./ndproxy > /dev/null 2>&1
>echo x - ./ndproxy/pkg-descr
>sed 's/^X//' >./ndproxy/pkg-descr << '2ecb2f96fe45f486b83ab9ec2a1101d9'
>XThe ndproxy(4) kernel module implements IPv6 Neighbor Discovery
>Xproxying with many options to handle several use-cases.
>X
>XIt replies to a neighbor solicitation with a specific neighbor
>Xadvertisement, in order to let the PE uplink router send further
>Xpackets to a CPE downlink router, that may or may not be the same
>Xnode that the one which runs ndproxy.
>X
>XThe main difference with the ndp(8) command-line tool is that, with
>Xndproxy(4), the host running ndp can be used only to redirect
>Xpackets to another IPv6 internal router, for instance a dedicated
>Xone with hardware support of IPv6 routing processes.
>X
>XWWW: http://www.fenyo.net/newweb/ndproxy.html
>2ecb2f96fe45f486b83ab9ec2a1101d9
>echo c - ./ndproxy/files
>mkdir -p ./ndproxy/files > /dev/null 2>&1
>echo x - ./ndproxy/files/ndproxy.in
>sed 's/^X//' >./ndproxy/files/ndproxy.in << 'f734405c34ad3e8cd129bc409dba1a6f'
>X#!/bin/sh
>X#
>X# $FreeBSD$
>X#
>X
>X# PROVIDE: ndproxy
>X# REQUIRE: NETWORKING sysctl
>X# KEYWORD: nojail
>X
>X. /etc/rc.subr
>X
>Xname="ndproxy"
>Xrcvar=ndproxy_enable
>Xstart_cmd="ndproxy_start"
>Xstop_cmd="ndproxy_stop"
>X
>Xndproxy_start()
>X{
>X    echo "Starting ndproxy:"
>X    sysctl net.inet6.ndproxyconf_uplink_interface > /dev/null 2>&1
>X    if [ $? -eq 1 ]; then
>X	kldload ndproxy > /dev/null 2>&1
>X	if [ $? -eq 1 ]; then
>X	    echo Failure loading ndproxy.
>X	    return;
>X	fi
>X    fi
>X
>X    sysctl net.inet6.ndproxycount=0
>X
>X    sysctl net.inet6.ndproxyconf_uplink_interface=${ndproxy_uplink_interface}
>X    sysctl net.inet6.ndproxyconf_downlink_mac_address=${ndproxy_downlink_mac_address}
>X    sysctl net.inet6.ndproxyconf_exception_ipv6_addresses=${ndproxy_exception_ipv6_addresses}
>X    sysctl net.inet6.ndproxyconf_uplink_ipv6_addresses=${ndproxy_uplink_ipv6_addresses}
>X
>X    if [ -z "${ndproxy_uplink_interface}" ]; then
>X	echo "Warning: ndproxy_uplink_interface should be defined in rc.conf (see ndproxy(4))."
>X    fi
>X
>X    if [ -z "${ndproxy_downlink_mac_address}" ]; then
>X	echo "Warning: ndproxy_downlink_mac_address should be defined in rc.conf (see ndproxy(4))."
>X    fi
>X
>X    if [ -z "${ndproxy_uplink_ipv6_addresses}" ]; then
>X	echo "Warning: ndproxy_uplink_ipv6_addresses should be defined in rc.conf (see ndproxy(4))."
>X    fi
>X
>X    # Note that ndproxy_exception_ipv6_addresses may be left empty.
>X    
>X    if [ -n "${ndproxy_uplink_interface}" ]; then
>X	ifconfig ${ndproxy_uplink_interface} | head -1 | grep PPROMISC > /dev/null
>X	if [ $? -eq 1 ]; then
>X	    echo "Putting interface ${ndproxy_uplink_interface} into permanently promiscuous mode."
>X	    ifconfig ${ndproxy_uplink_interface} promisc
>X	fi
>X    fi
>X    
>X    echo Done.
>X}
>X
>Xndproxy_stop()
>X{
>X    echo "Stopping ndproxy:"
>X
>X    sysctl net.inet6.ndproxyconf_uplink_interface > /dev/null 2>&1
>X    if [ $? -eq 1 ]; then
>X	echo Failure unloading ndproxy.
>X    else
>X	kldunload ndproxy > /dev/null 2>&1
>X	if [ $? -eq 1 ]; then
>X	    echo Failure unloading ndproxy.
>X	else
>X	    echo Done.
>X	fi
>X    fi
>X}
>X
>Xload_rc_config $name
>Xrun_rc_command "$1"
>f734405c34ad3e8cd129bc409dba1a6f
>echo x - ./ndproxy/files/pkg-message.in
>sed 's/^X//' >./ndproxy/files/pkg-message.in << '075c0a3d9082ae3192f2fb4f54a957db'
>X-------------------------------------------------------------------------------
>XIMPORTANT! MAKE SURE TO READ THE FOLLOWING!
>X
>XPlease remember to reinstall this port after kernel source update.
>X
>Xndproxy is configured using four sysctl kernel states. The boot script
>X(%%PREFIX%%/etc/rc.d/ndproxy) can set those states using rc.conf variables.
>X
>XHere is the corresponding rc.conf variable to each sysctl kernel state:
>X
>Xsysctl kernel state                            rc.conf corresponding variable
>X-------------------------------------------------------------------------------
>Xnet.inet6.ndproxyconf_uplink_interface         ndproxy_uplink_interface
>Xnet.inet6.ndproxyconf_downlink_mac_address     ndproxy_downlink_mac_address
>Xnet.inet6.ndproxyconf_exception_ipv6_addresses ndproxy_exception_ipv6_addresses
>Xnet.inet6.ndproxyconf_uplink_ipv6_addresses    ndproxy_uplink_ipv6_addresses
>X
>XThe network interface set in ndproxy_uplink_interface will be put into
>Xpermanently promiscuous mode.
>X
>XIMPORTANT! MAKE SURE TO READ THE ABOVE!
>X-------------------------------------------------------------------------------
>075c0a3d9082ae3192f2fb4f54a957db
>echo x - ./ndproxy/distinfo
>sed 's/^X//' >./ndproxy/distinfo << '7ac88d4d6bf90f1074f2aa226f67cf5d'
>XTIMESTAMP = 1550596032
>XSHA256 (AlexandreFenyo-ndproxy-3.2-v3.2_GH0.tar.gz) = 8ea72bb12b26bb1ca4df31bc1bd86b3eea52d42fe2d014d890a1a067721c63dd
>XSIZE (AlexandreFenyo-ndproxy-3.2-v3.2_GH0.tar.gz) = 10172863
>7ac88d4d6bf90f1074f2aa226f67cf5d
>echo x - ./ndproxy/Makefile
>sed 's/^X//' >./ndproxy/Makefile << '0534f86d41852189c3f6542d8f39fe95'
>X# $FreeBSD$
>X
>XPORTNAME=	ndproxy
>XPORTVERSION=	3.2
>XCATEGORIES=	net
>X
>XMAINTAINER=	fbsd.bugzilla@fenyo.net
>XCOMMENT=	Implementation of IPv6 Neighbor Discovery proxy
>X
>XLICENSE=	BSD2CLAUSE
>XLICENSE_FILE=	${WRKSRC}/LICENSE
>X
>XUSES=		kmod
>X
>XSUB_FILES=	pkg-message
>X
>XUSE_RC_SUBR=	ndproxy
>XUSE_GITHUB=	yes
>XGH_ACCOUNT=	AlexandreFenyo
>XGH_TAGNAME=	v${PORTVERSION}
>X
>X# build for a kernel with 'options VIMAGE'
>XCFLAGS+=	-DVIMAGE
>X
>XPLIST_FILES=	${KMODDIR}/${PORTNAME}.ko man/man4/${PORTNAME}.4.gz
>X
>Xpre-build:
>X	(cd ${BUILD_WRKSRC}; ${MAKE} depend)
>X
>Xdo-install:
>X	${INSTALL_KLD} ${WRKSRC}/${PORTNAME}.ko ${STAGEDIR}${KMODDIR}
>X	${INSTALL_MAN} ${WRKSRC}/${PORTNAME}.4 ${STAGEDIR}${PREFIX}/man/man4/
>X
>X.include <bsd.port.mk>
>0534f86d41852189c3f6542d8f39fe95
>exit
>

Actions: View

Attachments on bug 235864: 202163 | 202164 | 202165 | 202166 | 202167 | 203128