Attachment 203818 Details for Bug 237261 – Verbose dmesg.boot from 8.2

Verbose dmesg.boot from 8.2

dmesg-8.2-verbose.txt (text/plain), 27.33 KB, created by Mikhail Teterin on 2019-04-20 07:38:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mikhail Teterin

Created: 2019-04-20 07:38:49 UTC

Size: 27.33 KB

patch

obsolete

>Copyright (c) 1992-2011 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011
>    root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>Preloaded elf kernel "boot/kernel/kernel" at 0xc0fdb000.
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Calibrating TSC clock ... TSC clock: 992334427 Hz
>CPU: Intel(R) Pentium(R) M processor 1000MHz (992.33-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x695  Family = 6  Model = 9  Stepping = 5
>  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
>  Features2=0x180<EST,TM2>
>
>Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
>Data TLB: 4 KB Pages, 4-way set associative, 128 entries
>Instruction TLB: 4 MB pages, fully associative, 2 entries
>2nd-level cache: 1 MB, 8-way set associative, 64 byte line size
>1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
>Data TLB: 4 MB Pages, 4-way set associative, 8 entries
>1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
>real memory  = 805306368 (768 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x0000000000088fff, 557056 bytes (136 pages)
>0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>0x0000000001026000 - 0x000000002ed2efff, 768643072 bytes (187657 pages)
>avail memory = 767971328 (732 MB)
>bios32: Found BIOS32 Service Directory header at 0xc00f6a30
>bios32: Entry = 0xfd750 (c00fd750)  Rev = 0  Len = 1
>pcibios: PCI BIOS entry at 0xfd750+0x262
>pnpbios: Found PnP BIOS data at 0xc00f6a80
>pnpbios: Entry = f0000:bdd6  Rev = 1.0
>Other BIOS signatures found:
>x86bios:   IVT 0x000000-0x0004ff at 0xc0000000
>x86bios:  SSEG 0x010000-0x01ffff at 0xc3a8d000
>x86bios:  EBDA 0x09f000-0x09ffff at 0xc009f000
>x86bios:   ROM 0x0a0000-0x0effff at 0xc00a0000
>ULE: setup cpu 0
>wlan: <802.11 Link Layer>
>null: <null device, zero device>
>random: <entropy source, Software, Yarrow>
>nfslock: pseudo-device
>io: <I/O>
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>Pentium Pro MTRR support enabled
>hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>ACPI: RSDP 0xf69b0 00014 (v00 SONY  )
>ACPI: RSDT 0x2fae77ff 00030 (v01   SONY       G1 20030729 PTL  00000000)
>ACPI: FACP 0x2faebec2 00084 (v02   SONY       G1 20030729 PTL  00000050)
>ACPI: DSDT 0x2fae7c9b 04227 (v01   SONY       G1 20030729 PTL  0100000E)
>ACPI: FACS 0x2fafcfc0 00040
>ACPI: BOOT 0x2faebfd8 00028 (v01   SONY       G1 20030729 PTL  00000001)
>ACPI: SSDT 0x2fae782f 00254 (v01   SONY       G1 20030729 PTL  00000000)
>acpi0: <SONY> on motherboard
>acpi0: [MPSAFE]
>acpi0: [ITHREAD]
>pci_open(1):	mode 1 addr port (0x0cf8) is 0x8002402c
>pci_open(1a):	mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=35808086)
>pcibios: BIOS version 2.10
>acpi0: wakeup code va 0xc3a8c000 pa 0x1000
>ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>cpu0: <ACPI CPU> on acpi0
>acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    9   N     0  9
>  Validation          0    9   N     0  9
>  After Disable       0  255   N     0  9
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  9
>  Validation          0  255   N     0  9
>  After Disable       0  255   N     0  9
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  9
>  Validation          0  255   N     0  9
>  After Disable       0  255   N     0  9
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    9   N     0  9
>  Validation          0    9   N     0  9
>  After Disable       0  255   N     0  9
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    9   N     0  9
>  Validation          0    9   N     0  9
>  After Disable       0  255   N     0  9
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    3   N     0  9
>  Validation          0  255   N     0  9
>  After Disable       0  255   N     0  9
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  9
>  Validation          0  255   N     0  9
>  After Disable       0  255   N     0  9
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  9
>  Validation          0  255   N     0  9
>  After Disable       0  255   N     0  9
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>ACPI: Found matching pin for 0.2.INTA at func 0: 9
>ACPI: Found matching pin for 0.29.INTA at func 0: 9
>ACPI: Found matching pin for 0.29.INTB at func 1: 9
>ACPI: Found matching pin for 0.29.INTC at func 2: 255
>ACPI: Found matching pin for 0.29.INTD at func 7: 255
>ACPI: Found matching pin for 0.31.INTB at func 3: 255
>ACPI: Found matching pin for 0.31.INTB at func 5: 9
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x8086, dev=0x3580, revid=0x02
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x3584, revid=0x02
>	domain=0, bus=0, slot=0, func=1
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x3585, revid=0x02
>	domain=0, bus=0, slot=0, func=3
>	class=08-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x3582, revid=0x02
>	domain=0, bus=0, slot=2, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=9
>	powerspec 1  supports D0 D1 D3  current D0
>	map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled
>	map[14]: type Memory, range 32, base 0xe0000000, size 19, enabled
>	map[18]: type I/O Port, range 32, base 0x1800, size  3, enabled
>pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
>pcib0: slot 2 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKA
>found->	vendor=0x8086, dev=0x3582, revid=0x02
>	domain=0, bus=0, slot=2, func=1
>	class=03-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	powerspec 1  supports D0 D1 D3  current D0
>	map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 27, enabled
>	map[14]: type Memory, range 32, base 0xe0080000, size 19, enabled
>found->	vendor=0x8086, dev=0x24c2, revid=0x03
>	domain=0, bus=0, slot=29, func=0
>	class=0c-03-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=9
>	map[20]: type I/O Port, range 32, base 0x1820, size  5, enabled
>pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
>pcib0: slot 29 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKA
>unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
>found->	vendor=0x8086, dev=0x24c4, revid=0x03
>	domain=0, bus=0, slot=29, func=1
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=9
>	map[20]: type I/O Port, range 32, base 0x1840, size  5, enabled
>pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LPCB.LNKD:0)
>pcib0: slot 29 INTB routed to irq 9 via \\_SB_.PCI0.LPCB.LNKD
>unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
>found->	vendor=0x8086, dev=0x24c7, revid=0x03
>	domain=0, bus=0, slot=29, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=255
>	map[20]: type I/O Port, range 32, base 0x1860, size  5, enabled
>unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
>found->	vendor=0x8086, dev=0x24cd, revid=0x03
>	domain=0, bus=0, slot=29, func=7
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=255
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 32, base 0xe0100000, size 10, enabled
>unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xe0100000
>found->	vendor=0x8086, dev=0x2448, revid=0x83
>	domain=0, bus=0, slot=30, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0007, statreg=0x8080, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x24cc, revid=0x03
>	domain=0, bus=0, slot=31, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x24ca, revid=0x03
>	domain=0, bus=0, slot=31, func=1
>	class=01-01-8a, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	map[20]: type I/O Port, range 32, base 0x1810, size  4, enabled
>	map[24]: type Memory, range 32, base 0, size 10, memory disabled
>found->	vendor=0x8086, dev=0x24c3, revid=0x03
>	domain=0, bus=0, slot=31, func=3
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=255
>	map[20]: type I/O Port, range 32, base 0x1880, size  5, enabled
>found->	vendor=0x8086, dev=0x24c5, revid=0x03
>	domain=0, bus=0, slot=31, func=5
>	class=04-01-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=9
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type I/O Port, range 32, base 0x1c00, size  8, enabled
>	map[14]: type I/O Port, range 32, base 0x18c0, size  6, enabled
>	map[18]: type Memory, range 32, base 0xe0100c00, size  9, enabled
>	map[1c]: type Memory, range 32, base 0xe0100800, size  8, enabled
>pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPCB.LNKB:0)
>pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LPCB.LNKB
>found->	vendor=0x8086, dev=0x24c6, revid=0x03
>	domain=0, bus=0, slot=31, func=6
>	class=07-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=255
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type I/O Port, range 32, base 0x2400, size  8, enabled
>	map[14]: type I/O Port, range 32, base 0x2000, size  7, enabled
>pci0: <base peripheral> at device 0.1 (no driver attached)
>pci0: <base peripheral> at device 0.3 (no driver attached)
>vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 9 at device 2.0 on pci0
>agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> on vgapci0
>vgapci0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000
>vgapci0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xe0000000
>agp0: detected 3964k stolen memory
>agp0: aperture size is 128M
>vgapci1: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on pci0
>uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 9 at device 29.0 on pci0
>uhci0: [MPSAFE]
>uhci0: [ITHREAD]
>usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
>uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 9 at device 29.1 on pci0
>uhci1: [MPSAFE]
>uhci1: [ITHREAD]
>usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
>uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f at device 29.2 on pci0
>pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LPCB.LNKC:0)
>pci_link2: Picked IRQ 9 with weight 4
>pcib0: slot 29 INTC routed to irq 9 via \\_SB_.PCI0.LPCB.LNKC
>uhci2: [MPSAFE]
>uhci2: [ITHREAD]
>usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
>ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0100000-0xe01003ff at device 29.7 on pci0
>pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LPCB.LNKH:0)
>pci_link7: Picked IRQ 9 with weight 5
>pcib0: slot 29 INTD routed to irq 9 via \\_SB_.PCI0.LPCB.LNKH
>ehci0: [MPSAFE]
>ehci0: [ITHREAD]
>usbus3: EHCI version 1.0
>usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
>pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pcib1:   domain            0
>pcib1:   secondary bus     2
>pcib1:   subordinate bus   2
>pcib1:   I/O decode        0x3000-0x3fff
>pcib1:   memory decode     0xe0200000-0xe02fffff
>pcib1:   no prefetched decode
>pcib1:   Subtractively decoded bridge.
>ACPI: Found matching pin for 2.5.INTA at func 0: 3
>pci_link5: BIOS IRQ 3 for 2.5.INTA is invalid
>ACPI: Found matching pin for 2.5.INTB at func 1: 255
>ACPI: Found matching pin for 2.11.INTA at func 0: 9
>ACPI: Found matching pin for 2.8.INTA at func 0: 9
>pci2: <ACPI PCI bus> on pcib1
>pci2: domain=0, physical bus=2
>found->	vendor=0x1180, dev=0x0475, revid=0xb8
>	domain=0, bus=2, slot=5, func=0
>	class=06-07-00, hdrtype=0x02, mfdev=1
>	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x07 (1750 ns)
>	intpin=a, irq=3
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0, size 12, enabled
>pcib1: matched entry for 2.5.INTA (src \\_SB_.PCI0.LPCB.LNKF:0)
>pci_link5: Picked IRQ 9 with weight 8
>pcib1: slot 5 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKF
>found->	vendor=0x1180, dev=0x0551, revid=0x00
>	domain=0, bus=2, slot=5, func=1
>	class=0c-00-10, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
>	intpin=b, irq=255
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 32, base 0xe0211000, size 11, enabled
>pcib1: requested memory range 0xe0211000-0xe02117ff: good
>found->	vendor=0x8086, dev=0x103d, revid=0x83
>	domain=0, bus=2, slot=8, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0017, statreg=0x0290, cachelnsz=16 (dwords)
>	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
>	intpin=a, irq=9
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0xe0210000, size 12, enabled
>pcib1: requested memory range 0xe0210000-0xe0210fff: good
>	map[14]: type I/O Port, range 32, base 0x3000, size  6, enabled
>pcib1: requested I/O range 0x3000-0x303f: in range
>pcib1: matched entry for 2.8.INTA (src \\_SB_.PCI0.LPCB.LNKE:0)
>pcib1: slot 8 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKE
>found->	vendor=0x168c, dev=0x0013, revid=0x01
>	domain=0, bus=2, slot=11, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0016, statreg=0x0290, cachelnsz=16 (dwords)
>	lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
>	intpin=a, irq=9
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 32, base 0xe0200000, size 16, enabled
>pcib1: requested memory range 0xe0200000-0xe020ffff: good
>pcib1: matched entry for 2.11.INTA (src \\_SB_.PCI0.LPCB.LNKD:0)
>pcib1: slot 11 INTA routed to irq 9 via \\_SB_.PCI0.LPCB.LNKD
>cbb0: <RF5C475 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2
>pcib1: cbb0 requested memory range 0x0-0xffffffff: good
>cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
>cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000
>cardbus0: <CardBus bus> on cbb0
>pccard0: <16-bit PCCard bus> on cbb0
>cbb0: [MPSAFE]
>cbb0: [FILTER]
>cbb0: PCI Configuration space:
>  0x00: 0x04751180 0x02100007 0x060700b8 0x00824000 
>  0x10: 0x80000000 0x020000dc 0x40040302 0xfffff000 
>  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
>  0x30: 0x00000000 0xfffffffc 0x00000000 0x07000109 
>  0x40: 0x8144104d 0x00000001 0x00000000 0x00000000 
>  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
>  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
>  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
>  0x80: 0x24a00001 0x00000000 0x04630463 0x00000000 
>  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
>  0xa0: 0x80000046 0x00000000 0x00000000 0x00000000 
>  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
>  0xc0: 0x8144104d 0x00000000 0x00000000 0x00000000 
>  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 
>  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
>  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
>fwohci0: <Ricoh R5C551> mem 0xe0211000-0xe02117ff at device 5.1 on pci2
>fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe0211000
>pcib1: matched entry for 2.5.INTB (src \\_SB_.PCI0.LPCB.LNKG:0)
>pci_link6: Picked IRQ 9 with weight 10
>pcib1: slot 5 INTB routed to irq 9 via \\_SB_.PCI0.LPCB.LNKG
>fwohci0: [MPSAFE]
>fwohci0: [ITHREAD]
>fwohci0: OHCI version 1.0 (ROM=1)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 08:00:46:03:01:7a:95:99
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>dcons_crom0: <dcons configuration ROM> on firewire0
>dcons_crom0: bus_addr 0x1068000
>fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 0a:00:46:7a:95:99
>fwe0: bpf attached
>fwe0: Ethernet address: 0a:00:46:7a:95:99
>fwip0: <IP over FireWire> on firewire0
>fwip0: bpf attached
>fwip0: Firewire address: 08:00:46:03:01:7a:95:99 @ 0xfffe00000000, S400, maxrec 2048
>fwohci0: Initiate bus reset
>fwohci0: fwohci_intr_core: BUS reset
>fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
>fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x3000-0x303f mem 0xe0210000-0xe0210fff irq 9 at device 8.0 on pci2
>fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0210000
>fxp0: using memory space register mapping
>fxp0: PCI IDs: 8086 103d 104d 8144 0083
>fxp0: Dynamic Standby mode is disabled
>miibus0: <MII bus> on fxp0
>inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
>inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>fxp0: bpf attached
>fxp0: Ethernet address: 08:00:46:b7:cc:24
>fxp0: [MPSAFE]
>fxp0: [ITHREAD]
>ath0: <Atheros 5212> mem 0xe0200000-0xe020ffff irq 9 at device 11.0 on pci2
>ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe0200000
>ath0: [MPSAFE]
>ath0: [ITHREAD]
>ath0: unable to attach hardware; HAL status 13
>device_attach: ath0 attach returned 6
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
>atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810
>ata0: <ATA channel 0> on atapci0
>atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
>atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
>ata0: reset tp1 mask=03 ostat0=50 ostat1=00
>ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
>ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
>ata0: reset tp2 stat0=50 stat1=00 devices=0x1
>ata0: [MPSAFE]
>ata0: [ITHREAD]
>ata1: <ATA channel 1> on atapci0
>atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
>atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
>ata1: reset tp1 mask=03 ostat0=50 ostat1=00
>ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata1: reset tp2 stat0=00 stat1=00 devices=0x30000
>ata1: [MPSAFE]
>ata1: [ITHREAD]
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>pci0: <multimedia, audio> at device 31.5 (no driver attached)
>pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
>acpi_tz0: <Thermal Zone> on acpi0
>atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock (resolution 1000000us)
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0047
>atkbd: keyboard ID 0x41ab (2)
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
>atkbd0: [GIANT-LOCKED]
>atkbd0: [ITHREAD]
>psm0: unable to allocate IRQ
>psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
>psm0: current command byte:0047
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: [ITHREAD]
>psm0: model GlidePoint, device ID 0-00, 2 buttons
>psm0: config:00000000, flags:00000008, packet size:3
>psm0: syncmask:c0, syncbits:00
>battery0: <ACPI Control Method Battery> on acpi0
>acpi_acad0: <AC Adapter> on acpi0
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>ahc_isa_probe 1: ioport 0x1c00 alloc failed
>ex_isa_identify()
>pnp_identify: Trying Read_Port at 203
>pnp_identify: Trying Read_Port at 243
>pnp_identify: Trying Read_Port at 283
>pnp_identify: Trying Read_Port at 2c3
>pnp_identify: Trying Read_Port at 303
>pnp_identify: Trying Read_Port at 343
>pnp_identify: Trying Read_Port at 383
>pnp_identify: Trying Read_Port at 3c3
>PNP Identify complete
>isa_probe_children: disabling PnP devices
>pmtimer0 on isa0
>ata: ata0 already exists; skipping it
>ata: ata1 already exists; skipping it
>atkbdc: atkbdc0 already exists; skipping it
>atrtc: atrtc0 already exists; skipping it
>sc: sc0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd17ff,0xd8000-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: parallel port not found.
>ppc0: <Parallel port> failed to probe at irq 7 on isa0
>uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
>uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>isa_probe_children: probing PnP devices
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>Device configuration finished.
>procfs registered
>Timecounter "TSC" frequency 992334427 Hz quality 800
>Timecounters tick every 1.000 msec
>vlan: initialized, using hash tables with chaining
>firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
>firewire0: bus manager 0 
>lo0: bpf attached
>hptrr: no controller detected.
>ata0: Identifying devices: 00000001
>ata0: New devices: 00000001
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 12Mbps Full Speed USB v1.0
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>battery0: battery initialization start
>acpi_acad0: acline initialization start
>ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
>battery0: battery initialization done, tried 1 times
>acpi_acad0: On Line
>acpi_acad0: acline initialization done, tried 1 times
>ugen0.1: <Intel> at usbus0
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <Intel> at usbus1
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ugen2.1: <Intel> at usbus2
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen3.1: <Intel> at usbus3
>uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>ad0: setting UDMA100
>ad0: 61057MB <RunCore 64G-C SSD 2030> at ata0-master UDMA100 
>ad0: 125045424 sectors [124053C/16H/63S] 1 sectors/interrupt 1 depth queue
>GEOM: new disk ad0
>ad0: Intel check1 failed
>ad0: Adaptec check1 failed
>ad0: LSI (v3) check1 failed
>ad0: LSI (v2) check1 failed
>ad0: FreeBSD check1 failed
>ata1: Identifying devices: 00030000
>ata1: New devices: 00030000
>GEOM: ad0: partition 2 does not start on a track boundary.
>GEOM: ad0: partition 2 does not end on a track boundary.
>GEOM: ad0: partition 1 does not end on a track boundary.
>uhub0: 2 ports with 2 removable, self powered
>uhub1: 2 ports with 2 removable, self powered
>uhub2: 2 ports with 2 removable, self powered
>ata1: reiniting channel ..
>ata1: reset tp1 mask=03 ostat0=00 ostat1=00
>ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata1: reset tp2 stat0=00 stat1=00 devices=0x30000
>ata1: reinit done ..
>unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0
>ata1: reiniting channel ..
>ata1: reset tp1 mask=03 ostat0=00 ostat1=00
>ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata1: reset tp2 stat0=00 stat1=00 devices=0x30000
>ata1: reinit done ..
>unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0
>ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
>acd0: setting UDMA33
>acd0: <UJDA755 DVD/CDRW/1.00> CDRW drive at ata1 as master
>acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 
>acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
>acd0: Writes: CDR, CDRW, test write, burnproof
>acd0: Audio: play, 256 volume levels
>acd0: Mechanism: ejectable tray, unlocked
>acd0: Medium: no/blank disc
>ATA PseudoRAID loaded
>Root mount waiting for: usbus3
>uhub3: 6 ports with 6 removable, self powered
>Root mount waiting for: usbus3
>ugen3.2: <Sony> at usbus3
>umass0: <Sony USB Memory Stick Slot, class 0/0, rev 2.00/1.00, addr 2> on usbus3
>umass0:  8070i (ATAPI) over Bulk-Only; quirks = 0x0000
>umass0: Get Max Lun not supported (USB_ERR_STALLED)
>Root mount waiting for: usbus3
>ugen1.2: <vendor 0x054c> at usbus1
>umass0:0:0:-1: Attached to scbus0
>Trying to mount root from nfs:
>NFS ROOT: 192.168.1.8:FreeBSD/i386-old
>(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
>(probe0:umass-sim0:0:0:0): SCSI status error
>(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
>(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
>(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
>(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
>(probe0:umass-sim0:0:0:0): Error 6, Unretryable error
>pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
>pass0: <Sony MSC-U04 3.00> Removable Direct Access SCSI-0 device 
>pass0: 40.000MB/s transfers
>GEOM: new disk da0
>(da0:umass-sim0:0:0:0): SCSI status error
>(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 
>(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
>(da0:umass-sim0:0:0:0): SCSI status: Check Condition
>(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
>(da0:umass-sim0:0:0:0): Error 6, Unretryable error
>da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
>da0: <Sony MSC-U04 3.00> Removable Direct Access SCSI-0 device 
>da0: 40.000MB/s transfers
>da0: Attempt to query device size failed: NOT READY, Medium not present
>(da0:umass-sim0:0:0:0): SCSI status error
>(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 
>(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
>(da0:umass-sim0:0:0:0): SCSI status: Check Condition
>(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
>(da0:umass-sim0:0:0:0): Error 6, Unretryable error
>Opened disk da0 -> 6
>(da0:umass-sim0:0:0:0): SCSI status error
>(da0:umass-sim0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0 
>(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
>(da0:umass-sim0:0:0:0): SCSI status: Check Condition
>(da0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
>(da0:umass-sim0:0:0:0): Error 6, Unretryable error
>Opened disk da0 -> 6
>ct_to_ts([2019-04-20 02:34:17]) = 1555727657.000000000
>ct_to_ts([2019-04-20 02:34:17]) = 1555727657.000000000
>start_init: trying /sbin/init
>ts_to_ct(1555745671.024059117) = [2019-04-20 07:34:31]
>fxp0: link state changed to DOWN
>fxp0: link state changed to UP

Actions: View

Attachments on bug 237261: 203644 | 203818