FreeBSD Bugzilla – Attachment 207978 Details for
Bug 240944
em(4): Crash with Intel 82571EB NIC with AMD Piledriver and Steamroller APUs
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
dmesg from from NC364T and AMD RX-427BB Steamroller
dmesg_tinfever.txt (text/plain), 11.37 KB, created by
tinfever
on 2019-10-01 06:01:30 UTC
(
hide
)
Description:
dmesg from from NC364T and AMD RX-427BB Steamroller
Filename:
MIME Type:
Creator:
tinfever
Created:
2019-10-01 06:01:30 UTC
Size:
11.37 KB
patch
obsolete
>---<<BOOT>>--- >Copyright (c) 1992-2018 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 12.0-RELEASE r341666 GENERIC amd64 >FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) >VT(efifb): resolution 800x600 >CPU: AMD RX-427BB with AMD Radeon(tm) R7 Graphics (2695.11-MHz K8-class CPU) > Origin="AuthenticAMD" Id=0x630f01 Family=0x15 Model=0x30 Stepping=1 > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> > AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> > AMD Features2=0xfebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC> > Structured Extended Features=0x9<FSGSBASE,BMI1> > XSAVE Features=0x1<XSAVEOPT> > AMD Extended Feature Extensions ID EBX=0x1000 > SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 > TSC: P-state invariant, performance statistics >real memory = 4294967296 (4096 MB) >avail memory = 3513421824 (3350 MB) >Event timer "LAPIC" quality 600 >ACPI APIC Table: <HPQOEM SLIC-WKS> >FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >FreeBSD/SMP: 1 package(s) x 4 core(s) >random: unblocking device. >Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181003/tbfadt-796) >ioapic0 <Version 2.1> irqs 0-23 on motherboard >ioapic1 <Version 2.1> irqs 24-55 on motherboard >Launching APs: 2 1 3 >Timecounter "TSC-low" frequency 1347555699 Hz quality 1000 >random: entropy device external interface >kbd1 at kbdmux0 >netmap: loaded module >[ath_hal] loaded >module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 >nexus0 >efirtc0: <EFI Realtime Clock> on motherboard >efirtc0: registered as a time-of-day clock, resolution 1.000000s >cryptosoft0: <software crypto> on motherboard >acpi0: <HPQOEM SLIC-WKS> on motherboard >acpi0: Power Button (fixed) >cpu0: <ACPI CPU> on acpi0 >attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 >Timecounter "i8254" frequency 1193182 Hz quality 0 >Event timer "i8254" frequency 1193182 Hz quality 100 >atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 >atrtc0: registered as a time-of-day clock, resolution 1.000000s >Event timer "RTC" frequency 32768 Hz quality 0 >hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 >Timecounter "HPET" frequency 14318180 Hz quality 950 >Event timer "HPET" frequency 14318180 Hz quality 450 >Event timer "HPET1" frequency 14318180 Hz quality 450 >Event timer "HPET2" frequency 14318180 Hz quality 450 >Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) >vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe07fffff,0xfeb00000-0xfeb3ffff irq 26 at device 1.0 on pci0 >vgapci0: Boot video device >hdac0: <ATI (0x1308) HDA Controller> mem 0xfeb64000-0xfeb67fff irq 27 at device 1.1 on pci0 >pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.1 on pci0 >pci1: <ACPI PCI bus> on pcib1 >pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 >pci2: <ACPI PCI bus> on pcib2 >pcib3: <PCI-PCI bridge> at device 2.0 on pci2 >pci3: <PCI bus> on pcib3 >em0: <Intel(R) PRO/1000 Network Connection> port 0xd020-0xd03f mem 0xfe920000-0xfe93ffff,0xfe880000-0xfe8fffff irq 27 at device 0.0 on pci3 >em0: attach_pre capping queues at 1 >em0: using 1024 tx descriptors and 1024 rx descriptors >em0: msix_init qsets capped at 1 >em0: Unable to map MSIX table >em0: Using an MSI interrupt >em0: allocated for 1 tx_queues >em0: allocated for 1 rx_queues >em0: Ethernet address: 00:26:55:d6:c4:cd >em0: netmap queues/slots: TX 1/1024, RX 1/1024 >em1: <Intel(R) PRO/1000 Network Connection> port 0xd000-0xd01f mem 0xfe900000-0xfe91ffff,0xfe800000-0xfe87ffff irq 26 at device 0.1 on pci3 >em1: attach_pre capping queues at 1 >em1: using 1024 tx descriptors and 1024 rx descriptors >em1: msix_init qsets capped at 1 >em1: Unable to map MSIX table >em1: Using an MSI interrupt >em1: allocated for 1 tx_queues >em1: allocated for 1 rx_queues >em1: Ethernet address: 00:26:55:d6:c4:cc >em1: netmap queues/slots: TX 1/1024, RX 1/1024 >pcib4: <PCI-PCI bridge> at device 4.0 on pci2 >pci4: <PCI bus> on pcib4 >em2: <Intel(R) PRO/1000 Network Connection> port 0xc020-0xc03f mem 0xfe720000-0xfe73ffff,0xfe680000-0xfe6fffff irq 25 at device 0.0 on pci4 >em2: attach_pre capping queues at 1 >em2: using 1024 tx descriptors and 1024 rx descriptors >em2: msix_init qsets capped at 1 >em2: Unable to map MSIX table >em2: Using an MSI interrupt >em2: allocated for 1 tx_queues >em2: allocated for 1 rx_queues >em2: Ethernet address: 00:26:55:d6:c4:cf >em2: netmap queues/slots: TX 1/1024, RX 1/1024 >em3: <Intel(R) PRO/1000 Network Connection> port 0xc000-0xc01f mem 0xfe700000-0xfe71ffff,0xfe600000-0xfe67ffff irq 24 at device 0.1 on pci4 >em3: attach_pre capping queues at 1 >em3: using 1024 tx descriptors and 1024 rx descriptors >em3: msix_init qsets capped at 1 >em3: Unable to map MSIX table >em3: Using an MSI interrupt >em3: allocated for 1 tx_queues >em3: allocated for 1 rx_queues >em3: Ethernet address: 00:26:55:d6:c4:ce >em3: netmap queues/slots: TX 1/1024, RX 1/1024 >pcib5: <ACPI PCI-PCI bridge> irq 18 at device 3.2 on pci0 >pci5: <ACPI PCI bus> on pcib5 >re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfea04000-0xfea04fff,0xfea00000-0xfea03fff irq 36 at device 0.0 on pci5 >re0: Using 1 MSI-X message >re0: Chip rev. 0x54000000 >re0: MAC rev. 0x00100000 >miibus0: <MII bus> on re0 >rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 >rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow >re0: Using defaults for TSO: 65518/35/2048 >re0: Ethernet address: 7c:d3:0a:39:1c:c5 >re0: netmap queues/slots: TX 1/256, RX 1/256 >xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb6a000-0xfeb6bfff irq 18 at device 16.0 on pci0 >xhci0: 32 bytes context size, 64-bit DMA >xhci0: Unable to map MSI-X table >usbus0 on xhci0 >usbus0: 5.0Gbps Super Speed USB v3.0 >xhci1: <AMD FCH USB 3.0 controller> mem 0xfeb68000-0xfeb69fff irq 17 at device 16.1 on pci0 >xhci1: 32 bytes context size, 64-bit DMA >xhci1: Unable to map MSI-X table >usbus1 on xhci1 >usbus1: 5.0Gbps Super Speed USB v3.0 >ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f mem 0xfeb70000-0xfeb707ff irq 19 at device 17.0 on pci0 >ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier supported >ahcich0: <AHCI channel> at channel 0 on ahci0 >ahcich1: <AHCI channel> at channel 1 on ahci0 >ahcich2: <AHCI channel> at channel 2 on ahci0 >ahcich3: <AHCI channel> at channel 3 on ahci0 >ohci0: <AMD FCH USB Controller> mem 0xfeb6f000-0xfeb6ffff irq 18 at device 18.0 on pci0 >usbus2 on ohci0 >usbus2: 12Mbps Full Speed USB v1.0 >ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb6e000-0xfeb6e0ff irq 17 at device 18.2 on pci0 >usbus3: EHCI version 1.0 >usbus3 on ehci0 >usbus3: 480Mbps High Speed USB v2.0 >ohci1: <AMD FCH USB Controller> mem 0xfeb6d000-0xfeb6dfff irq 18 at device 19.0 on pci0 >usbus4 on ohci1 >usbus4: 12Mbps Full Speed USB v1.0 >ehci1: <AMD FCH USB 2.0 controller> mem 0xfeb6c000-0xfeb6c0ff irq 17 at device 19.2 on pci0 >usbus5: EHCI version 1.0 >usbus5 on ehci1 >usbus5: 480Mbps High Speed USB v2.0 >atapci0: <AMD Hudson-2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f irq 17 at device 20.1 on pci0 >ata0: <ATA channel> at channel 0 on atapci0 >ata1: <ATA channel> at channel 1 on atapci0 >hdac1: <AMD Hudson-2 HDA Controller> mem 0xfeb60000-0xfeb63fff irq 16 at device 20.2 on pci0 >isab0: <PCI-ISA bridge> at device 20.3 on pci0 >isa0: <ISA bus> on isab0 >pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0 >pci6: <ACPI PCI bus> on pcib6 >acpi_button0: <Power Button> on acpi0 >uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) >ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 >ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode >ppc0: FIFO with 16/16/8 bytes threshold >ppbus0: <Parallel port bus> on ppc0 >lpt0: <Printer> on ppbus0 >lpt0: Interrupt-driven port >ppi0: <Parallel I/O> on ppbus0 >orm0: <ISA Option ROM> at iomem 0xcf800-0xd07ff pnpid ORM0000 on isa0 >hwpstate0: <Cool`n'Quiet 2.0> on cpu0 >Timecounters tick every 1.000 msec >hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 >hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 >pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 >pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 >pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 >pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 >hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1 >hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1 >pcm4: <Realtek ALC221 (Analog 2.0+HP/2.0)> at nid 20,33 and 24,27 on hdaa1 >pcm5: <Realtek ALC221 (Front Analog Headphones)> at nid 26 on hdaa1 >ugen5.1: <AMD EHCI root HUB> at usbus5 >ugen3.1: <AMD EHCI root HUB> at usbus3 >ugen0.1: <0x1022 XHCI root HUB> at usbus0 >ugen2.1: <AMD OHCI root HUB> at usbus2 >uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 >uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 >uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 >uhub3: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 >ugen1.1: <0x1022 XHCI root HUB> at usbus1 >ugen4.1: <AMD OHCI root HUB> at usbus4 >uhub4: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 >uhub5: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 >uhub1: 5 ports with 5 removable, self powered >uhub5: 5 ports with 5 removable, self powered >uhub3: 4 ports with 4 removable, self powered >uhub4: 4 ports with 4 removable, self powered >uhub2: 5 ports with 5 removable, self powered >uhub0: 5 ports with 5 removable, self powered >ugen2.2: <SEM USB Keyboard> at usbus2 >ukbd0 on uhub1 >ukbd0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus2 >kbd2 at ukbd0 >ugen2.3: <PixArt USB Optical Mouse> at usbus2 >ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 >ada0: <KINGSTON SNS4151S316GD S9FM01.6> ACS-3 ATA SATA 3.x device >ada0: Serial Number 50026B735300311B >ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) >ada0: Command Queueing enabled >ada0: 15272MB (31277232 512 byte sectors) >Trying to mount root from ufs:/dev/ada0p2 [rw]... >WARNING: / was not properly dismounted >lo0: link state changed to UP >re0: link state changed to DOWN >em0: link state changed to UP >intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 >smbus0: <System Management Bus> on intsmb0 >uhid0 on uhub1 >uhid0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus2 >ums0 on uhub1 >ums0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 3> on usbus2 >ums0: 3 buttons and [XYZ] coordinates ID=0 >em0: link state changed to DOWN >em0: link state changed to UP
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 240944
:
207973
|
207977
| 207978 |
227688
|
227689
|
227690