Attachment 210979 Details for Bug 243534 – dmesg.boot contents from 12.1

dmesg.boot contents from 12.1

dmesg.boot (text/plain), 3.75 KB, created by Michael Reim on 2020-01-23 06:43:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Reim

Created: 2020-01-23 06:43:06 UTC

Size: 3.75 KB

patch

obsolete

>---<<BOOT>>---
>Copyright (c) 1992-2019 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.1-STABLE r356185 GENERIC sparc64
>gcc version 4.2.1 20070831 patched [FreeBSD]
>real memory  = 1073741824 (1024 MB)
>avail memory = 1027497984 (979 MB)
>cpu0: Sun Microsystems UltraSparc-IIe Processor (548.00 MHz CPU)
>random: unblocking device.
>random: entropy device external interface
>kbd0 at kbdmux0
>[ath_hal] loaded
>nexus0: <Open Firmware Nexus device>
>pcib0: <U2P UPA-PCI bridge> mem 0x1fe00000000-0x1fe0000ffff,0x1fe01000000-0x1fe010000ff irq 2032,2030,2031,2021 on nexus0
>pcib0: Sabre, impl 0, version 0, IGN 0x1f, bus A, 66MHz
>pcib0: DVMA map: 0x60000000 to 0x63ffffff 8192 entries
>pci0: <OFW PCI bus> on pcib0
>isab0: <PCI-ISA bridge> at device 7.0 on pci0
>isa0: <ISA bus> on isab0
>pci0: <old, non-VGA display device> at device 3.0 (no driver attached)
>dc0: <Davicom DM9102A 10/100BaseTX> port 0x10000-0x100ff mem 0-0xff at device 12.0 on pci0
>miibus0: <MII bus> on dc0
>amphy0: <DM9102 10/100 media interface> PHY 1 on miibus0
>amphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>dc0: Ethernet address: 00:03:ba:4e:55:e6
>dc1: <Davicom DM9102A 10/100BaseTX> port 0x10100-0x101ff mem 0x2000-0x20ff at device 5.0 on pci0
>miibus1: <MII bus> on dc1
>amphy1: <DM9102 10/100 media interface> PHY 1 on miibus1
>amphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>dc1: Ethernet address: 00:03:ba:4e:55:e6
>ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1000000-0x1000fff at device 10.0 on pci0
>usbus0 on ohci0
>atapci0: <AcerLabs M5229 UDMA66 controller> port 0x10200-0x10207,0x10218-0x1021b,0x10210-0x10217,0x10208-0x1020b,0x10220-0x1022f at device 13.0 on pci0
>atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
>ata2: <ATA channel> at channel 0 on atapci0
>ata3: <ATA channel> at channel 1 on atapci0
>cryptosoft0: <software crypto> on nexus0
>nexus0: <syscons> type unknown (no driver attached)
>rtc0: <Real-Time Clock> at port 0x70-0x71 pnpid PNP0b00 on isa0
>rtc0: registered as a time-of-day clock, resolution 1.000000s
>uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 pnpid PNP0501 on isa0
>uart0: console (9600,n,8,1)
>uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 43 pnpid PNP0501 on isa0
>Timecounter "tick" frequency 548000000 Hz quality 1000
>Event timer "tick" frequency 548000000 Hz quality 1000
>Timecounters tick every 1.000 msec
>usbus0: 12Mbps Full Speed USB v1.0
>ugen0.1: <AcerLabs OHCI root HUB> at usbus0
>uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>Trying to mount root from ufs:/dev/ada1a [rw]...
>Root mount waiting for: usbus0uhub0: 2 ports with 2 removable, self powered
> CAM
>cd0 at ata3 bus 0 scbus1 target 1 lun 0
>cd0: <TEAC CD-224E P.9A> Removable CD-ROM SCSI device
>cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>ada0 at ata2 bus 0 scbus0 target 0 lun 0
>ada0: <IC35L060AVER07-0 ER6OA46A> ATA-5 device
>ada0: Serial Number SZPTZ202544
>ada0: 66.700MB/s transfers (UDMA4, PIO 8192bytes)
>ada0: 58644MB (120103200 512 byte sectors)
>ada1 at ata3 bus 0 scbus1 target 0 lun 0
>ada1: <IBM-DTLA-307015 TX2OA60A> ATA-5 device
>ada1: Serial Number YFEYFML4312
>ada1: 66.700MB/s transfers (UDMA4, PIO 8192bytes)
>ada1: 14649MB (30003120 512 byte sectors)
>mountroot: waiting for device /dev/ada1a...
>warning: total configured swap (524280 pages) exceeds maximum recommended amount (503624 pages).
>warning: increase kern.maxswzone or reduce amount of swap.
>lo0: link state changed to UP
>dc0: link state changed to UP
>dc1: link state changed to DOWN

Actions: View

Attachments on bug 243534: 210979