Attachment 211529 Details for Bug 244002 – My kernel config

My kernel config

mary-teresa.XXXXX.ua.2 (text/plain), 24.66 KB, created by Vladyslav V. Prodan on 2020-02-10 09:23:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Vladyslav V. Prodan

Created: 2020-02-10 09:23:30 UTC

Size: 24.66 KB

patch

obsolete

>#
># GENERIC -- Generic kernel configuration file for FreeBSD/amd64
>#
># For more information on this file, please read the config(5) manual page,
># and/or the handbook section on Kernel Configuration Files:
>#
>#    https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
>#
># The handbook is also available locally in /usr/share/doc/handbook
># if you've installed the doc distribution, otherwise always see the
># FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
># latest information.
>#
># An exhaustive list of options and more detailed explanations of the
># device lines is also present in the ../../conf/NOTES and NOTES files.
># If you are in doubt as to the purpose or necessity of a line, check first
># in NOTES.
>#
># $FreeBSD: stable/12/sys/amd64/conf/GENERIC 340695 2018-11-20 19:37:09Z zeising $
>
>cpu		HAMMER
>ident		SUPPORT-12-1-2
>maxusers	512
>hints		"GENERIC.hints"		# Default places to look for devices.
>
>options		ROUTETABLES=5	# allocated fibs up to 65536. default is 1.
>					# but that would be a bad idea as they are large.
>
># makeoptions	MODULES_OVERRIDE="opensolaris zfs krpc netmap"
># makeoptions	MKMODULESENV+="WITHOUT_INET_SUPPORT="
> makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
># makeoptions	WITH_CTF=1		# Run ctfconvert(1) for DTrace support
>
>options		SCHED_ULE		# ULE scheduler
>options		NUMA			# Non-Uniform Memory Architecture support
>options		PREEMPTION		# Enable kernel thread preemption
>options		VIMAGE			# Subsystem virtualization, e.g. VNET
>options		INET			# InterNETworking
>options		INET6			# IPv6 communications protocols
>options		IPSEC			# IP (v4/v6) security
>options		IPSEC_SUPPORT		# Allow kldload of ipsec and tcpmd5
>options		TCP_OFFLOAD		# TCP offload
>options		TCP_BLACKBOX		# Enhanced TCP event logging
>options		TCP_HHOOK		# hhook(9) framework for TCP
>options		TCP_RFC7413		# TCP Fast Open
>#PR241958#options		TCPHPTS
>options		SCTP			# Stream Control Transmission Protocol
>options		FFS			# Berkeley Fast Filesystem
>options		SOFTUPDATES		# Enable FFS soft updates support
>options		UFS_ACL			# Support for access control lists
>options		UFS_DIRHASH		# Improve performance on big directories
>options		UFS_GJOURNAL		# Enable gjournal-based UFS journaling
>options		QUOTA			# Enable disk quotas for UFS
>options		MD_ROOT			# MD is a potential root device
>options		NFSCL			# Network Filesystem Client
>options		NFSD			# Network Filesystem Server
>options		NFSLOCKD		# Network Lock Manager
>options		NFS_ROOT		# NFS usable as /, requires NFSCL
>options		MSDOSFS			# MSDOS Filesystem
>options		CD9660			# ISO 9660 Filesystem
>options		PROCFS			# Process filesystem (requires PSEUDOFS)
>options		PSEUDOFS		# Pseudo-filesystem framework
>options		GEOM_RAID		# Soft RAID functionality.
>options		GEOM_LABEL		# Provides labelization
>options		EFIRT			# EFI Runtime Services support
>options		COMPAT_FREEBSD32	# Compatible with i386 binaries
>options		COMPAT_FREEBSD4		# Compatible with FreeBSD4
>options		COMPAT_FREEBSD5		# Compatible with FreeBSD5
>options		COMPAT_FREEBSD6		# Compatible with FreeBSD6
>options		COMPAT_FREEBSD7		# Compatible with FreeBSD7
>options		COMPAT_FREEBSD9		# Compatible with FreeBSD9
>options		COMPAT_FREEBSD10	# Compatible with FreeBSD10
>options		COMPAT_FREEBSD11	# Compatible with FreeBSD11
>options		SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
>options		KTRACE			# ktrace(1) support
>options		STACK			# stack(9) support
>options		SYSVSHM			# SYSV-style shared memory
>options		SYSVMSG			# SYSV-style message queues
>options		SYSVSEM			# SYSV-style semaphores
>options		_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
>options		PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
>options		KBD_INSTALL_CDEV	# install a CDEV entry in /dev
>options		HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
>options		AUDIT			# Security event auditing
>options		CAPABILITY_MODE		# Capsicum capability mode
>options		CAPABILITIES		# Capsicum capabilities
>options		MAC			# TrustedBSD MAC Framework
>options		KDTRACE_FRAME		# Ensure frames are compiled in
>options		KDTRACE_HOOKS		# Kernel DTrace hooks
>options		DDB_CTF			# Kernel ELF linker loads CTF data
>options		INCLUDE_CONFIG_FILE	# Include this file in kernel
>options		RACCT			# Resource accounting framework
>options		RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default
>options		RCTL			# Resource limits
>
># Enable Linux Kernel Programming Interface
>#options	COMPAT_LINUXKPI
>
># Add support for the EXT2FS filesystem of Linux fame.
>options 	EXT2FS
>
># Debugging support.  Always need this:
># options		KDB			# Enable kernel debugger support.
> options		KDB_TRACE		# Print a stack trace for a panic.
>
>## Enable the ddb debugger backend.
>#options		DDB
>## Print the numerical value of symbols in addition to the symbolic representation.
>#options		DDB_NUMSYM
>## Enable the remote gdb debugger backend.
>#options		GDB
>
># Kernel dump features.
>options		EKCD			# Support for encrypted kernel dumps
>options		GZIO			# gzip-compressed kernel and user dumps
>options		ZSTDIO			# zstd-compressed kernel and user dumps
>options		NETDUMP			# netdump(4) client support
>
># Make an SMP-capable kernel by default
>options		SMP			# Symmetric MultiProcessor Kernel
>options		EARLY_AP_STARTUP
>
># CPU frequency control
>device			cpufreq
>device			cpuctl
>
># CLOCK OPTIONS
># options 	HZ=1000
>
>## Temperature
>device			amdtemp
>device			coretemp
>
># Bus support.
>device			acpi
>options		ACPI_DMAR
>device			pci
>options		PCI_HP			# PCI-Express native HotPlug
>options		PCI_IOV			# PCI SR-IOV support
>
># Floppy drives
>device			fdc
>
># ATA controllers
>device			ahci			# AHCI-compatible SATA controllers
>device			ata				# Legacy ATA/SATA controllers
>options		ATA_STATIC_ID		# Static device numbering
>device			mvs				# Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
>device			siis			# SiliconImage SiI3124/SiI3132/SiI3531 SATA
>
># SCSI Controllers
>device			ahc			# AHA2940 and onboard AIC7xxx devices
>device			ahd			# AHA39320/29320 and onboard AIC79xx devices
>device			esp			# AMD Am53C974 (Tekram DC-390(T))
>device			hptiop			# Highpoint RocketRaid 3xxx series
>device			isp			# Qlogic family
>#device			ispfw			# Firmware for QLogic HBAs- normally a module
>device			mpt			# LSI-Logic MPT-Fusion
>device			mps			# LSI-Logic MPT-Fusion 2
>device			mpr			# LSI-Logic MPT-Fusion 3
>#device			ncr			# NCR/Symbios Logic
>device			sym			# NCR/Symbios Logic (newer chipsets + those of `ncr')
>device			trm			# Tekram DC395U/UW/F DC315U adapters
>device			isci			# Intel C600 SAS controller
>device			ocs_fc			# Emulex FC adapters
>
># ATA/SCSI peripherals
>device			scbus			# SCSI bus (required for ATA/SCSI)
>device			ch			# SCSI media changers
>device			da			# Direct Access (disks)
>device			sa			# Sequential Access (tape etc)
>device			cd			# CD
>device			pass			# Passthrough device (direct ATA/SCSI access)
>device			ses			# Enclosure Services (SES and SAF-TE)
>#device			ctl			# CAM Target Layer
>
># RAID controllers interfaced to the SCSI subsystem
>device			amr			# AMI MegaRAID
>device			arcmsr			# Areca SATA II RAID
>device			ciss			# Compaq Smart RAID 5*
>device			dpt			# DPT Smartcache III, IV - See NOTES for options
>device			hptmv			# Highpoint RocketRAID 182x
>device			hptnr			# Highpoint DC7280, R750
>device			hptrr			# Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
>device			hpt27xx			# Highpoint RocketRAID 27xx
>device			iir			# Intel Integrated RAID
>device			ips			# IBM (Adaptec) ServeRAID
>device			mly			# Mylex AcceleRAID/eXtremeRAID
>device			twa			# 3ware 9000 series PATA/SATA RAID
>device			smartpqi		# Microsemi smartpqi driver
>device			tws			# LSI 3ware 9750 SATA+SAS 6Gb/s RAID controller
>
># RAID controllers
>device			aac			# Adaptec FSA RAID
>device			aacp			# SCSI passthrough for aac (requires CAM)
>device			aacraid			# Adaptec by PMC RAID
>device			ida			# Compaq Smart RAID
>device			mfi			# LSI MegaRAID SAS
>device			mlx			# Mylex DAC960 family
>device			mrsas			# LSI/Avago MegaRAID SAS/SATA, 6Gb/s and 12Gb/s
>device			pmspcv			# PMC-Sierra SAS/SATA Controller driver
>#XXX pointer/int warnings
>#device			pst			# Promise Supertrak SX6000
>device			twe			# 3ware ATA RAID
>
># NVM Express (NVMe) support
>device			nvme			# base NVMe driver
>device			nvd			# expose NVMe namespaces as disks, depends on nvme
>
># atkbdc0 controls both the keyboard and the PS/2 mouse
>device			atkbdc			# AT keyboard controller
>device			atkbd			# AT keyboard
>device			psm			# PS/2 mouse
>
>device			kbdmux			# keyboard multiplexer
>
>device			vga			# VGA video card driver
>options			VESA			# Add support for VESA BIOS Extensions (VBE)
>
>device			splash			# Splash screen and screen saver support
>device			daemon_saver
>device			logo_saver
>
># syscons is the default console driver, resembling an SCO console
>device			sc
>options			SC_PIXEL_MODE		# add support for the raster text mode
>options			SC_HISTORY_SIZE=800     # number of history buffer lines
>options			MAXCONS=16		# number of virtual consoles
>
>
># vt is the new video console driver
>device			vt
>device			vt_vga
>device			vt_efifb
>options			VT_MAXWINDOWS=16	# Number of virtual consoles
>
>
>device			agp			# support several AGP chipsets
>
># PCCARD (PCMCIA) support
># PCMCIA and cardbus bridge support
>device			cbb			# cardbus (yenta) bridge
>device			pccard			# PC Card (16-bit) bus
>device			cardbus			# CardBus (32-bit) bus
>
># Serial (COM) ports
>device			uart			# Generic UART driver
>
># Parallel port
>device			ppc
>device			ppbus			# Parallel port bus (required)
>device			lpt			# Printer
>device			ppi			# Parallel port interface device
>#device			vpo			# Requires scbus and da
>
>device			puc			# Multi I/O cards and multi-channel UARTs
>
># PCI/PCI-X/PCIe Ethernet NICs that use iflib infrastructure
>device			iflib
>device		em			# Intel PRO/1000 Gigabit Ethernet Family
>device		ix			# Intel PRO/10GbE PCIE PF Ethernet
>device		ixv			# Intel PRO/10GbE PCIE VF Ethernet
>device		ixl			# Intel 700 Series Physical Function
>device		iavf			# Intel Adaptive Virtual Function
>device		vmx			# VMware VMXNET3 Ethernet
>
># PCI Ethernet NICs.
>device			bxe			# Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE
>device			de			# DEC/Intel DC21x4x (``Tulip'')
>device			le			# AMD Am7900 LANCE and Am79C9xx PCnet
>device			ti			# Alteon Networks Tigon I/II gigabit Ethernet
>device			txp			# 3Com 3cR990 (``Typhoon'')
>device			vx			# 3Com 3c590, 3c595 (``Vortex'')
>
># PCI Ethernet NICs that use the common MII bus controller code.
># NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
>device			miibus			# MII bus support
>device			ae			# Attansic/Atheros L2 FastEthernet
>device			age			# Attansic/Atheros L1 Gigabit Ethernet
>device			alc			# Atheros AR8131/AR8132 Ethernet
>device			ale			# Atheros AR8121/AR8113/AR8114 Ethernet
>device			bce			# Broadcom BCM5706/BCM5708 Gigabit Ethernet
>device			bfe			# Broadcom BCM440x 10/100 Ethernet
>device			bge			# Broadcom BCM570xx Gigabit Ethernet
>device			cas			# Sun Cassini/Cassini+ and NS DP83065 Saturn
>device			dc			# DEC/Intel 21143 and various workalikes
>device			et			# Agere ET1310 10/100/Gigabit Ethernet
>device			fxp			# Intel EtherExpress PRO/100B (82557, 82558)
>device			gem			# Sun GEM/Sun ERI/Apple GMAC
>device			hme			# Sun HME (Happy Meal Ethernet)
>device			jme			# JMicron JMC250 Gigabit/JMC260 Fast Ethernet
>device			lge			# Level 1 LXT1001 gigabit Ethernet
>device			msk			# Marvell/SysKonnect Yukon II Gigabit Ethernet
>device			nfe			# nVidia nForce MCP on-board Ethernet
>device			nge			# NatSemi DP83820 gigabit Ethernet
>device			pcn			# AMD Am79C97x PCI 10/100 (precedence over 'le')
>device			re			# RealTek 8139C+/8169/8169S/8110S
>device			rl			# RealTek 8129/8139
>device			sf			# Adaptec AIC-6915 (``Starfire'')
>device			sge			# Silicon Integrated Systems SiS190/191
>device			sis			# Silicon Integrated Systems SiS 900/SiS 7016
>device			sk			# SysKonnect SK-984x & SK-982x gigabit Ethernet
>device			ste			# Sundance ST201 (D-Link DFE-550TX)
>device			stge			# Sundance/Tamarack TC9021 gigabit Ethernet
>device			tl			# Texas Instruments ThunderLAN
>device			tx			# SMC EtherPower II (83c170 ``EPIC'')
>device			vge			# VIA VT612x gigabit Ethernet
>device			vr			# VIA Rhine, Rhine II
>device			wb			# Winbond W89C840F
>device			xl			# 3Com 3c90x (``Boomerang'', ``Cyclone'')
>
># Wireless NIC cards
>device			wlan			# 802.11 support
>options		IEEE80211_DEBUG		# enable debug msgs
>options		IEEE80211_AMPDU_AGE	# age frames in AMPDU reorder q's
>options		IEEE80211_SUPPORT_MESH	# enable 802.11s draft support
>device			wlan_wep		# 802.11 WEP support
>device			wlan_ccmp		# 802.11 CCMP support
>device			wlan_tkip		# 802.11 TKIP support
>device			wlan_amrr		# AMRR transmit rate control algorithm
>device			an			# Aironet 4500/4800 802.11 wireless NICs.
>device			ath			# Atheros NICs
>device			ath_pci			# Atheros pci/cardbus glue
>device			ath_hal			# pci/cardbus chip support
>options		AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
>options		AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation
>options		ATH_ENABLE_11N		# Enable 802.11n support for AR5416 and later
>device			ath_rate_sample		# SampleRate tx rate control for ath
>#device			bwi			# Broadcom BCM430x/BCM431x wireless NICs.
>#device			bwn			# Broadcom BCM43xx wireless NICs.
>device			ipw			# Intel 2100 wireless NICs.
>device			iwi			# Intel 2200BG/2225BG/2915ABG wireless NICs.
>device			iwn			# Intel 4965/1000/5000/6000 wireless NICs.
>device			malo			# Marvell Libertas wireless NICs.
>device			mwl			# Marvell 88W8363 802.11n wireless NICs.
>device			ral			# Ralink Technology RT2500 wireless NICs.
>device			wi			# WaveLAN/Intersil/Symbol 802.11 wireless NICs.
>device			wpi			# Intel 3945ABG wireless NICs.
>
># Pseudo devices.
>device			crypto			# core crypto support
>device			loop			# Network loopback
>device			random			# Entropy device
>device			padlock_rng		# VIA Padlock RNG
>device			rdrand_rng		# Intel Bull Mountain RNG
>device			ether			# Ethernet support
>device			vlan			# 802.1Q VLAN support
>device			tuntap			# Packet tunnel.
>device			md			# Memory "disks"
>device			gif			# IPv6 and IPv4 tunneling
>
># The `bpf' device enables the Berkeley Packet Filter.
># Be aware of the administrative consequences of enabling this!
># Note that 'bpf' is required for DHCP.
>device			bpf			# Berkeley packet filter
>
>device			nmdm			#back-to-back tty devices
>device			snp			#Snoop device - to look at pty/vty/etc..
>device			ccd			#Concatenated disk driver
>device			firmware		# firmware assist module
>
># The `vxlan' device implements the VXLAN encapsulation of Ethernet
># frames in UDP packets according to RFC7348.
>device			vxlan
>
>#  The `stf' device implements 6to4 encapsulation.
>device			stf
>
># Bridge interface.
>device			if_bridge
>
># Common Address Redundancy Protocol. See carp(4) for more details.
>device			carp
>
># Sockets Direct Protocol
>#options		SDP
>
># IPsec interface.
>device			enc
>
>device			epair
>device			edsc
>
>device			gre
>
>device			lagg
>device			me
>
>
># USB support
>options		USB_DEBUG		# enable debug msgs
>device			uhci			# UHCI PCI->USB interface
>device			ohci			# OHCI PCI->USB interface
>device			ehci			# EHCI PCI->USB interface (USB 2.0)
>device			xhci			# XHCI PCI->USB interface (USB 3.0)
>device			usb			# USB Bus (required)
>device			ukbd			# Keyboard
>device			umass			# Disks/Mass storage - Requires scbus and da
>
># Sound support
>device			sound			# Generic sound driver (required)
>device			snd_cmi			# CMedia CMI8338/CMI8738
>device			snd_csa			# Crystal Semiconductor CS461x/428x
>device			snd_emu10kx		# Creative SoundBlaster Live! and Audigy
>device			snd_es137x		# Ensoniq AudioPCI ES137x
>device			snd_hda			# Intel High Definition Audio
>device			snd_ich			# Intel, NVidia and other ICH AC'97 Audio
>device			snd_via8233		# VIA VT8233x Audio
>
># MMC/SD
>device			mmc			# MMC/SD bus
>device			mmcsd			# MMC/SD memory card
>device			sdhci			# Generic PCI SD Host Controller
>
># VirtIO support
>device			virtio			# Generic VirtIO bus (required)
>device			virtio_pci		# VirtIO PCI device
>device			vtnet			# VirtIO Ethernet device
>device			virtio_blk		# VirtIO Block device
>device			virtio_scsi		# VirtIO SCSI device
>device			virtio_balloon		# VirtIO Memory Balloon device
>device			virtio_random		# VirtIO Entropy device
>device			virtio_console		# VirtIO Console device
>
># Enable 32-bit runtime support for CloudABI binaries.
>#options		COMPAT_CLOUDABI32
>
># Enable 64-bit runtime support for CloudABI binaries.
>#options		COMPAT_CLOUDABI64
>
># HyperV drivers and enhancement support
>device			hyperv			# HyperV drivers 
>
># Xen HVM Guest Optimizations
># NOTE: XENHVM depends on xenpci.  They must be added or removed together.
>options		XENHVM			# Xen HVM kernel infrastructure
>device			xenpci			# Xen HVM Hypervisor services driver
>
># Netmap provides direct access to TX/RX rings on supported NICs
>device			netmap			# netmap(4) support
>
># evdev interface
>options		EVDEV_SUPPORT		# evdev support in legacy drivers
>device			evdev			# input event device support
>device			uinput			# install /dev/uinput cdev
>
>options		SW_WATCHDOG
>options		PANIC_REBOOT_WAIT_TIME=20
>
>device			smbus			# Bus support, required for smb below.
>
>device			intpm
>device			alpm
>device			ichsmb
>device			viapm
>device			amdpm
>device			amdsmb
>device			nfpm
>device			nfsmb
>device			ismt
>
>device			smb
>
># iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
>device			iicbus			# Bus support, required for ic/iic/iicsmb below.
>device			iicbb
>
>
>device			ic
>device			iic
>device			iicsmb			# smb over i2c bridge
>device			iicoc			# OpenCores I2C controller support
>
># Hardware watchdog timers:
>#
># ichwd: Intel ICH watchdog timer
># amdsbwd: AMD SB7xx watchdog timer
># viawd: VIA south bridge watchdog timer
># wbwd: Winbond watchdog timer
>#
>device			ichwd
>device			amdsbwd
>#device			viawd
>#device			wbwd
>
># Kernel side iconv library
>options		LIBICONV
>
># Size of the kernel message buffer.  Should be N * pagesize.
>options		MSGBUF_SIZE=40960
>
># Disk quotas are supported when this option is enabled.
>#options		VFS_AIO
>options		SUIDDIR
>
># Enable experimental features of the syscons terminal emulator (teken).
>options		TEKEN_CONS25		# cons25-style terminal emulation
>options		TEKEN_UTF8		# UTF-8 output handling
>options		VT_MAXWINDOWS=16	# Number of virtual consoles
>options		VT_TWOBUTTON_MOUSE	# Use right mouse button to paste
>
># The following options set the default framebuffer size.
>#options		VT_FB_DEFAULT_HEIGHT=480
>#options		VT_FB_DEFAULT_WIDTH=640
>
># The following options will let you change the default vt terminal colors.
>#options		TERMINAL_NORM_ATTR=(FG_GREEN|BG_BLACK)
>#options		TERMINAL_KERN_ATTR=(FG_LIGHTRED|BG_BLACK)
>
>#options		IPSEC_NAT_T		#NAT-T support, UDP encap of ESP
>
>options		DEVICE_POLLING
>device			pf
>device			pflog
>device			pfsync
>
># mchain library. It can be either loaded as KLD or compiled into kernel
>options 	LIBMCHAIN
>
>options		LIBALIAS
>
>options		NETGRAPH				# netgraph(4) system
>#options		NETGRAPH_DEBUG				# enable extra debugging, this
>								# affects netgraph(4) and nodes
>								# Node types
>
>options		NETGRAPH_ASYNC
># Node types
>options 	NETGRAPH_ASYNC
>options 	NETGRAPH_ATMLLC
>options 	NETGRAPH_ATM_ATMPIF
>options 	NETGRAPH_BLUETOOTH		# ng_bluetooth(4)
>options 	NETGRAPH_BLUETOOTH_BT3C		# ng_bt3c(4)
>options 	NETGRAPH_BLUETOOTH_HCI		# ng_hci(4)
>options 	NETGRAPH_BLUETOOTH_L2CAP	# ng_l2cap(4)
>options 	NETGRAPH_BLUETOOTH_SOCKET	# ng_btsocket(4)
>options 	NETGRAPH_BLUETOOTH_UBT		# ng_ubt(4)
>options 	NETGRAPH_BLUETOOTH_UBTBCMFW	# ubtbcmfw(4)
>options 	NETGRAPH_BPF
>options 	NETGRAPH_BRIDGE
>options 	NETGRAPH_CAR
>options 	NETGRAPH_CISCO
>options 	NETGRAPH_DEFLATE
>options 	NETGRAPH_DEVICE
>options 	NETGRAPH_ECHO
>options 	NETGRAPH_EIFACE
>options 	NETGRAPH_ETHER
>options 	NETGRAPH_FRAME_RELAY
>options 	NETGRAPH_GIF
>options 	NETGRAPH_GIF_DEMUX
>options 	NETGRAPH_HOLE
>options 	NETGRAPH_IFACE
>options 	NETGRAPH_IP_INPUT
>options 	NETGRAPH_IPFW
>options 	NETGRAPH_KSOCKET
>options 	NETGRAPH_L2TP
>options 	NETGRAPH_LMI
># MPPC compression requires proprietary files (not included)
>#options 	NETGRAPH_MPPC_COMPRESSION
>options 	NETGRAPH_MPPC_ENCRYPTION
>options 	NETGRAPH_NETFLOW
>options 	NETGRAPH_NAT
>options 	NETGRAPH_ONE2MANY
>options 	NETGRAPH_PATCH
>options 	NETGRAPH_PIPE
>options 	NETGRAPH_PPP
>options 	NETGRAPH_PPPOE
>options 	NETGRAPH_PPTPGRE
>options 	NETGRAPH_PRED1
>options 	NETGRAPH_RFC1490
>options 	NETGRAPH_SOCKET
>options 	NETGRAPH_SPLIT
>options 	NETGRAPH_SPPP
>options 	NETGRAPH_TAG
>options 	NETGRAPH_TCPMSS
>options 	NETGRAPH_TEE
>options 	NETGRAPH_UI
>options 	NETGRAPH_VJC
>options 	NETGRAPH_VLAN
>
>options		MROUTING			# Multicast routing
>
>options		IPFIREWALL
>options		IPFIREWALL_VERBOSE
>options		IPFIREWALL_VERBOSE_LIMIT=100
>options		IPFIREWALL_DEFAULT_TO_ACCEPT
>options		IPFIREWALL_NAT
>options		IPDIVERT
>##options		IPFILTER
>##options		IPFILTER_LOOKUP
>##options		IPFILTER_LOG
>options		IPSTEALTH			#support for stealth forwarding
>##options		TCPDEBUG
>options		TCPPCAP
>options 	TCP_BLACKBOX
>options 	TCP_HHOOK
>
>
>options		ALQ
>options		KTR_ALQ
>#
>options		ALTQ
>options		ALTQ_CBQ			# Class Bases Queueing
>options		ALTQ_RED			# Random Early Detection
>options		ALTQ_RIO			# RED In/Out
>options		ALTQ_CODEL			# CoDel Active Queueing
>options		ALTQ_HFSC			# Hierarchical Packet Scheduler
>options 	ALTQ_FAIRQ			# Fair Packet Scheduler
>options		ALTQ_CDNR			# Traffic conditioner
>options		ALTQ_PRIQ			# Priority Queueing
>options		ALTQ_NOPCC			# Required if the TSC is unusable
>
>options		DUMMYNET
>
># Statically Link in accept filters
>options		ACCEPT_FILTER_DATA
>options		ACCEPT_FILTER_DNS
>options		ACCEPT_FILTER_HTTP
>
>options		DIRECTIO
>
>options		RADIX_MPATH ### Untested!
>
>options		TCP_RFC7413 # untested # /sys/netinet/tcp_fastopen.c
>
># TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
># carried in TCP option 19. This option is commonly used to protect
># TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
># This is enabled on a per-socket basis using the TCP_MD5SIG socket option.
># This requires the use of 'device crypto' and 'options IPSEC'.
>options		TCP_SIGNATURE			#include support for RFC 2385
>
>#
># Etherswitch framework and drivers
>#
># etherswitch   The etherswitch(4) framework
># miiproxy			Proxy device for miibus(4) functionality
>#
># Switch hardware support:
># arswitch			Atheros switches
># ip17x			 IC+ 17x family switches
># rtl8366r			Realtek RTL8366 switches
># ukswitch			Multi-PHY switches
>#
>device			etherswitch
>device			miiproxy
>device			arswitch
>device			ip17x
>device			rtl8366rb
>device			ukswitch
>
>device			ioat			# Intel I/OAT DMA engine
>
># The kernel symbol table device; /dev/ksyms
>device		ksyms
>
># Memory options:
>
># The system memory devices; /dev/mem, /dev/kmem
>device			mem
>
>## mbuf
>options		MCLSHIFT=12			# mbuf cluster shift in bits, 12 == 4KB
>options		MSIZE=512			# mbuf size in bytes
>
>options		MBUF_PROFILING
>options		NBUF=1024			# Number of buffer headers
>
>
>options		GEOM_BDE				# Disk encryption.
>options		GEOM_BSD				# BSD disklabels (obsolete, gone in 12)
>options		GEOM_CACHE				# Disk cache.
>options		GEOM_CONCAT				# Disk concatenation.
>options		GEOM_ELI				# Disk encryption.
>options		GEOM_FOX				# Redundant path mitigation (obsolete, gone in 12)
>options		GEOM_GATE				# Userland services.
>options		GEOM_JOURNAL			# Journaling.
>options		GEOM_LABEL				# Providers labelization.
>options		GEOM_LINUX_LVM			# Linux LVM2 volumes
>options		GEOM_MAP				# Map based partitioning
>options		GEOM_MBR				# DOS/MBR partitioning (obsolete, gone in 12)
>options		GEOM_MIRROR				# Disk mirroring.
>options		GEOM_MULTIPATH			# Disk multipath
>options		GEOM_NOP				# Test class.
>options		GEOM_PART_APM			# Apple partitioning
>options		GEOM_PART_BSD			# BSD disklabel
>options		GEOM_PART_BSD64			# BSD disklabel64
>options		GEOM_PART_EBR			# Extended Boot Records
>options		GEOM_PART_EBR_COMPAT	# Backward compatible partition names
>options		GEOM_PART_GPT			# GPT partitioning
>options		GEOM_PART_LDM			# Logical Disk Manager
>options		GEOM_PART_MBR			# MBR partitioning
>options		GEOM_PART_VTOC8			# SMI VTOC8 disk label
>options		GEOM_RAID				# Soft RAID functionality.
>options		GEOM_RAID3				# RAID3 functionality.
>options		GEOM_SHSEC				# Shared secret.
>options		GEOM_STRIPE				# Disk striping.
>options		GEOM_SUNLABEL			# Sun/Solaris partitioning (obsolete, gone in 12)
>options		GEOM_UZIP				# Read-only compressed disks
>options		GEOM_VINUM				# Vinum logical volume manager
>options		GEOM_VIRSTOR			# Virtual storage.
>options		GEOM_VOL				# Volume names from UFS superblock (obsolete, gone in 12)
>options		GEOM_ZERO				# Performance testing helper.
>
>device			xz					# for geom_uzip
>
># NFS options:
>options		NFS_MINATTRTIMO=3			# VREG attrib cache timeout in sec
>options		NFS_MAXATTRTIMO=60
>options		NFS_MINDIRATTRTIMO=30		# VDIR attrib cache timeout in sec
>options		NFS_MAXDIRATTRTIMO=60
>#options		NFS_GATHERDELAY=10			# Default write gather delay (msec)
>#options		NFS_WDELAYHASHSIZ=16		# and with this
>
># crypto subsystem
>#device			crypto			# core crypto support
>device			cryptodev			# /dev/crypto for access to h/w
>device			rndtest			# FIPS 140-2 entropy tester
>
># Random number generator
>#options		RANDOM_YARROW		# Yarrow RNG
>##options		RANDOM_FORTUNA		# Fortuna RNG - not yet implemented
>#options		RANDOM_DEBUG		# Debugging messages
>#options		RANDOM_RWFILE		# Read and write entropy cache
>#options		RANDOM_LOADABLE
>options		RANDOM_ENABLE_UMA
>options		RANDOM_ENABLE_ETHER		# ether_input
># Module to enable execution of application via emulators like QEMU
>options		IMAGACT_BINMISC

Actions: View

Attachments on bug 244002: 211509 | 211529 | 211530 | 211532 | 211583