Attachment 213188 Details for Bug 245449 – dmesg after applied `STACKUP` patch.

dmesg after applied `STACKUP` patch.

dmesg.txt (text/plain), 9.62 KB, created by ASOU Masato on 2020-04-08 07:37:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: ASOU Masato

Created: 2020-04-08 07:37:06 UTC

Size: 9.62 KB

patch

obsolete

>---<<BOOT>>---
>Copyright (c) 1992-2020 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.1-STABLE #28 r359720M: Wed Apr  8 15:26:49 JST 2020
>    root@tornado-hp:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
>FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
>VT(efifb): resolution 1024x768
>CPU: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz (3000.14-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0x506e3  Family=0x6  Model=0x5e  Stepping=3
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>  AMD Features2=0x121<LAHF,ABM,Prefetch>
>  Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
>  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
>  TSC: P-state invariant, performance statistics
>real memory  = 8589934592 (8192 MB)
>avail memory = 8154386432 (7776 MB)
>Event timer "LAPIC" quality 600
>ACPI APIC Table: <HP     ProLiant>
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>FreeBSD/SMP: 1 package(s) x 4 core(s)
>random: unblocking device.
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>Launching APs: 1 3 2
>Timecounter "TSC-low" frequency 1500070881 Hz quality 1000
>random: entropy device external interface
>kbd1 at kbdmux0
>000.000023 [4336] netmap_init               netmap: loaded module
>[ath_hal] loaded
>module_register_init: MOD_LOAD (vesa, 0xffffffff811302a0, 0) error 19
>random: registering fast source Intel Secure Key RNG
>random: fast provider: "Intel Secure Key RNG"
>nexus0
>efirtc0: <EFI Realtime Clock> on motherboard
>efirtc0: registered as a time-of-day clock, resolution 1.000000s
>cryptosoft0: <software crypto> on motherboard
>acpi0: <HP ProLiant> on motherboard
>acpi0: Power Button (fixed)
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>Timecounter "HPET" frequency 24000000 Hz quality 950
>Event timer "HPET" frequency 24000000 Hz quality 550
>Event timer "HPET1" frequency 24000000 Hz quality 440
>Event timer "HPET2" frequency 24000000 Hz quality 440
>Event timer "HPET3" frequency 24000000 Hz quality 440
>Event timer "HPET4" frequency 24000000 Hz quality 440
>attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>acpi_syscontainer0: <System Container> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
>pci0: <ACPI PCI bus> numa-domain 0 on pcib0
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci0
>pci1: <ACPI PCI bus> numa-domain 0 on pcib1
>pcib2: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci0
>pci2: <ACPI PCI bus> numa-domain 0 on pcib2
>igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x92d00000-0x92dfffff,0x92e04000-0x92e07fff at device 0.0 numa-domain 0 on pci2
>igb0: Using 1024 TX descriptors and 1024 RX descriptors
>igb0: Using 4 RX queues 4 TX queues
>igb0: Using MSI-X interrupts with 5 vectors
>igb0: Ethernet address: 48:df:37:07:56:16
>igb0: netmap queues/slots: TX 4/1024, RX 4/1024
>igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0x92c00000-0x92cfffff,0x92e00000-0x92e03fff at device 0.1 numa-domain 0 on pci2
>igb1: Using 1024 TX descriptors and 1024 RX descriptors
>igb1: Using 4 RX queues 4 TX queues
>igb1: Using MSI-X interrupts with 5 vectors
>igb1: Ethernet address: 48:df:37:07:56:17
>igb1: netmap queues/slots: TX 4/1024, RX 4/1024
>xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0x2ffff00000-0x2ffff0ffff at device 20.0 numa-domain 0 on pci0
>xhci0: 32 bytes context size, 64-bit DMA
>usbus0 numa-domain 0 on xhci0
>usbus0: 5.0Gbps Super Speed USB v3.0
>pci0: <simple comms> at device 22.0 (no driver attached)
>ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x2040-0x2047,0x2048-0x204b,0x2020-0x203f mem 0x92f80000-0x92f87fff,0x92f8c000-0x92f8c0ff,0x92f00000-0x92f7ffff at device 23.0 numa-domain 0 on pci0
>ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich2: <AHCI channel> at channel 2 on ahci0
>ahcich3: <AHCI channel> at channel 3 on ahci0
>ahcich4: <AHCI channel> at channel 4 on ahci0
>ahcich5: <AHCI channel> at channel 5 on ahci0
>ahciem0: <AHCI enclosure management bridge> on ahci0
>pcib3: <ACPI PCI-PCI bridge> at device 29.0 numa-domain 0 on pci0
>pci3: <ACPI PCI bus> numa-domain 0 on pcib3
>vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff irq 17 at device 0.1 numa-domain 0 on pci3
>vgapci0: Boot video device
>uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 numa-domain 0 on pci3
>usbus1 numa-domain 0 on uhci0
>usbus1: 12Mbps Full Speed USB v1.0
>pcib4: <ACPI PCI-PCI bridge> at device 29.2 numa-domain 0 on pci0
>pci4: <ACPI PCI bus> numa-domain 0 on pcib4
>pci0:2:0:0: failed to read VPD data.
>bge0: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0x92b30000-0x92b3ffff,0x92b40000-0x92b4ffff,0x92b50000-0x92b5ffff at device 0.0 numa-domain 0 on pci4
>bge0: APE FW version: NCSI v1.3.16.0
>bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
>miibus0: <MII bus> numa-domain 0 on bge0
>brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>bge0: Using defaults for TSO: 65518/35/2048
>bge0: Ethernet address: 98:f2:b3:8f:0c:94
>pci0:2:0:1: failed to read VPD data.
>bge1: <Broadcom BCM5720 A0, ASIC rev. 0x5720000> mem 0x92b00000-0x92b0ffff,0x92b10000-0x92b1ffff,0x92b20000-0x92b2ffff at device 0.1 numa-domain 0 on pci4
>bge1: APE FW version: NCSI v1.3.16.0
>bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
>miibus1: <MII bus> numa-domain 0 on bge1
>brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
>brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>bge1: Using defaults for TSO: 65518/35/2048
>bge1: Ethernet address: 98:f2:b3:8f:0c:95
>isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
>isa0: <ISA bus> numa-domain 0 on isab0
>pci0: <memory> at device 31.2 (no driver attached)
>cpu0: <ACPI CPU> numa-domain 0 on acpi0
>uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>uart0: console (115200,n,8,1)
>orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
>est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 258700002100
>device_attach: est0 attach returned 6
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 258700002100
>device_attach: est1 attach returned 6
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 258600002100
>device_attach: est2 attach returned 6
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 259100002100
>device_attach: est3 attach returned 6
>Timecounters tick every 1.000 msec
>Trying to mount root from ufs:/dev/ada0p2 [rw]...
>ugen0.1: <0x8086 XHCI root HUB> at usbus0
>ugen1.1: <HP UHCI root HUB> at usbus1
>Root mount waiting for: usbus0 CAM usbus1
>uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
>ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
>ses0: SEMB SES Device
>Root mount waiting for:ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>ada0: <LK0200GEYMR 4IWTHPG1> ACS-2 ATA SATA 3.x device
>ada0: Serial Number BTHC706208UV200TGN
>ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 512bytes)
>ada0: Command Queueing enabled
>ada0: 190782MB (390721968 512 byte sectors)
> usbus0 CAM usbus1 ses
>ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
>Root mount waiting for: usbus0 usbus1 ses
>uhub1: 2 ports with 2 removable, self powered
>uhub0: 22 ports with 22 removable, self powered
>Root mount waiting for: usbus0
>ugen0.2: <vendor 0x0424 product 0x2660> at usbus0
>uhub2 numa-domain 0 on uhub0
>uhub2: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0
>Root mount waiting for: usbus0
>uhub2: 2 ports with 1 removable, self powered
>ugen0.3: <Chicony Generic USB Hub> at usbus0
>uhub3 numa-domain 0 on uhub0
>uhub3: <Chicony Generic USB Hub, class 9/0, rev 1.10/1.02, addr 2> on usbus0
>Root mount waiting for: usbus0
>uhub3: 3 ports with 2 removable, bus powered
>Root mount waiting for: usbus0
>ugen0.4: <Chicony PFU-65 USB Keyboard> at usbus0
>ukbd0 numa-domain 0 on uhub3
>ukbd0: <Chicony PFU-65 USB Keyboard, class 0/0, rev 1.10/1.02, addr 3> on usbus0
>kbd2 at ukbd0
>mountroot: waiting for device /dev/ada0p2...
>lo0: link state changed to UP
>bge1: link state changed to DOWN
>bge1: link state changed to UP

Actions: View

Attachments on bug 245449: 213188