Attachment 214466 Details for Bug 244356 – Stick KT_32G: 1st round of outputs from `usbtest`

Stick KT_32G: 1st round of outputs from `usbtest`

KT_32G_usbtest.txt (text/plain), 53.44 KB, created by Olivier Certner on 2020-05-13 23:00:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Olivier Certner

Created: 2020-05-13 23:00:47 UTC

Size: 53.44 KB

patch

obsolete

>[0] - Select Computer Mode:
>
>   1) This computer is Running the Device Side
>   2) This computer is Running the Host Side
>   x) Return to previous menu
>
>>2
>[0.2] - Select Host Mode Test (via LibUSB):
>
>      1) Select USB device (VID=0x0000, PID=0x0000)
>      2) Manually enter USB vendor and product ID
>      3) Force FULL speed operation: <NO>
>      4) Mass Storage (UMASS)
>      5) Modem (UMODEM)
>     10) Start String Descriptor Test
>     11) Start Port Reset Test
>     12) Start Set Config Test
>     13) Start Get Descriptor Test
>     14) Start Suspend and Resume Test
>     15) Start Set and Clear Endpoint Stall Test
>     16) Start Set Alternate Interface Setting Test
>     17) Start Invalid Control Request Test
>     30) Duration: <60> seconds
>     x) Return to previous menu
>
>>1
>
>[] Select USB device:
>       0) ugen0.1: <0x1022 XHCI root HUB> at usbus0
>       1) ugen2.1: <0x1022 XHCI root HUB> at usbus2
>       2) ugen1.1: <0x1022 XHCI root HUB> at usbus1
>       3) ugen2.2: <vendor 0x0451 product 0x8442> at usbus2
>       4) ugen1.2: <AsusTek Computer Inc. AURA LED Controller> at usbus1
>       5) ugen2.3: <vendor 0x0461 USB Optical Mouse> at usbus2
>       6) ugen2.4: <vendor 0x0451 product 0x82ff> at usbus2
>       7) ugen2.5: <vendor 0x0451 product 0x82ee> at usbus2
>       8) ugen2.6: <vendor 0x0451 product 0x8440> at usbus2
>       9) ugen2.7: <Kingston DataTraveler 3.0> at usbus2
>       r) Refresh device list
>       x) Return to previous menu
>
>Enter integer value>9
>[0.2] - Select Host Mode Test (via LibUSB):
>
>      1) Select USB device (VID=0x0951, PID=0x1666)
>      2) Manually enter USB vendor and product ID
>      3) Force FULL speed operation: <NO>
>      4) Mass Storage (UMASS)
>      5) Modem (UMODEM)
>     10) Start String Descriptor Test
>     11) Start Port Reset Test
>     12) Start Set Config Test
>     13) Start Get Descriptor Test
>     14) Start Suspend and Resume Test
>     15) Start Set and Clear Endpoint Stall Test
>     16) Start Set Alternate Interface Setting Test
>     17) Start Invalid Control Request Test
>     30) Duration: <60> seconds
>     x) Return to previous menu
>
>>4
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <YES>
>        8) Toggle try invalid wrapper block: <YES>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <YES>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>7
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <YES>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <YES>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>8
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <YES>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>10
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>30
>Attaching to: ugen2.7: <Kingston DataTraveler 3.0> at usbus2 @ iface 0
>Resetting device ...
>Testing SCSI commands ...
>Disk reports a capacity of LBA=60604415 and BS=512
>ERROR: CSW status: 1
>INFO: Prevent medium removal failed
>Highest readable LBA: 60604415 (not verified), Capacity is 31029 MBytes
>Highest testable LBA: 65535
>Setting up initial data pattern, LBA limit = 65535 ... SUCCESS
>Starting test ...
>
>ERROR: Data transfer: 4
>ERROR: do_msc_reset
>ERROR: do_read_10
>Device disconnected
>
>Test done!
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Increasing>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Single block>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>15
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Single block>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>30
>Attaching to: ugen2.7: <Kingston DataTraveler 3.0> at usbus2 @ iface 0
>Resetting device ...
>Testing SCSI commands ...
>Disk reports a capacity of LBA=60604415 and BS=512
>ERROR: CSW status: 1
>INFO: Prevent medium removal failed
>Highest readable LBA: 60604415 (not verified), Capacity is 31029 MBytes
>Highest testable LBA: 65535
>Setting up initial data pattern, LBA limit = 65535 ... SUCCESS
>Starting test ...
>
>STATUS: ID=2106, RX=1066496 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4790, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=7474, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=10158, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=12843, RX=1374720 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=15527, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=18211, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=20338, RX=1089024 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=23022, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=25706, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=28390, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=31074, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=33758, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=36442, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=39126, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=41810, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=44494, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=47178, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=49862, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=52546, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=55230, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=57914, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=60571, RX=1360384 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=63255, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=65939, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=68607, RX=1366016 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=71291, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=73975, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=76659, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=79343, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=82027, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=84711, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=87395, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=90079, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=92763, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=95447, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=98131, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=100815, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=103499, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=106183, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=108867, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=111552, RX=1374720 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=114236, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=116920, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=119604, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=122288, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=124972, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=127656, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=130340, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=133024, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=135708, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=138392, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=141076, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=143760, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=146444, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=149128, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=151812, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=154496, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=157137, RX=1352192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=159821, RX=1374208 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>
>Test done!
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Single block>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <2 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <4 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <8 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <16 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <32 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <64 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <128 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <256 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <512 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <1024 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>30
>Attaching to: ugen2.7: <Kingston DataTraveler 3.0> at usbus2 @ iface 0
>Resetting device ...
>Testing SCSI commands ...
>Disk reports a capacity of LBA=60604415 and BS=512
>ERROR: CSW status: 1
>INFO: Prevent medium removal failed
>Highest readable LBA: 60604415 (not verified), Capacity is 31029 MBytes
>Highest testable LBA: 65535
>Setting up initial data pattern, LBA limit = 65535 ... SUCCESS
>Starting test ...
>
>ERROR: Data transfer: 4
>ERROR: do_msc_reset
>ERROR: CBW reception: 1
>ERROR: do_msc_reset
>ERROR: do_read_10
>Device disconnected
>
>Test done!
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Increasing>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>30
>Attaching to: ugen2.7: <Kingston DataTraveler 3.0> at usbus2 @ iface 0
>Resetting device ...
>Testing SCSI commands ...
>Disk reports a capacity of LBA=60604415 and BS=512
>ERROR: CSW status: 1
>INFO: Prevent medium removal failed
>Highest readable LBA: 60604415 (not verified), Capacity is 31029 MBytes
>Highest testable LBA: 65535
>Setting up initial data pattern, LBA limit = 65535 ... SUCCESS
>Starting test ...
>
>STATUS: ID=425, RX=46001664 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=766, RX=103882240 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1005, RX=108295680 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1200, RX=110023680 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1367, RX=109701632 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1519, RX=112261120 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1657, RX=112166400 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1785, RX=112754688 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1905, RX=113326080 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2018, RX=113455616 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2125, RX=113457664 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2227, RX=113613312 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2325, RX=114175488 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2417, RX=111660032 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2508, RX=114709504 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2595, RX=113631744 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2680, RX=114762240 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2762, RX=114217472 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2842, RX=114749440 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2919, RX=113541120 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2995, RX=115043328 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3069, RX=114857472 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3141, RX=114444288 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3211, RX=113809920 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3280, RX=114639360 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3348, RX=115362816 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3414, RX=114233856 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3479, RX=114682880 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3542, RX=113218560 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3605, RX=115250688 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3666, RX=113528320 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3726, RX=113525760 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3786, RX=115368960 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3844, RX=113275392 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3902, RX=114997760 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3959, RX=114693120 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4015, RX=114300928 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4071, RX=115906560 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4125, RX=113287680 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4179, RX=114780672 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4232, RX=114106880 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4285, RX=115545088 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4337, RX=114762752 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4388, RX=113900544 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4439, RX=115232256 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4489, RX=114265600 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4539, RX=115545600 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4588, RX=114476544 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4636, RX=113332224 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4684, RX=114511872 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4732, RX=115691520 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4779, RX=114424320 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4825, RX=113084928 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4872, RX=116662272 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4917, RX=112757760 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4963, RX=116335104 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4998, RX=89241600 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=5043, RX=115660800 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=5087, RX=114093056 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=5131, RX=115084288 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>
>Test done!
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Increasing>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Single block>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <2 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <4 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <8 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <16 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <32 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <64 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <128 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <256 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <512 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <1024 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>30
>Attaching to: ugen2.7: <Kingston DataTraveler 3.0> at usbus2 @ iface 0
>Resetting device ...
>Testing SCSI commands ...
>Disk reports a capacity of LBA=60604415 and BS=512
>ERROR: CSW status: 1
>INFO: Prevent medium removal failed
>Highest readable LBA: 60604415 (not verified), Capacity is 31029 MBytes
>Highest testable LBA: 65535
>Setting up initial data pattern, LBA limit = 65535 ... SUCCESS
>Starting test ...
>
>STATUS: ID=117, RX=49283072 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=325, RX=109051904 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=534, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=743, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=917, RX=91226112 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1125, RX=109051904 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1334, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1543, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1752, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=1961, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2170, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2379, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2588, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=2797, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3006, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3215, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3424, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3633, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=3842, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4051, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4260, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4469, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4678, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=4887, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=5096, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=5305, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=5514, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=5723, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=5932, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=6141, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=6350, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=6559, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=6768, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=6977, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=7186, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=7395, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=7604, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=7813, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=8022, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=8231, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=8440, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=8649, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=8858, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=9067, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=9276, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=9485, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=9694, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=9903, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=10112, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=10321, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=10530, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=10737, RX=108527616 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=10946, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=11155, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=11364, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=11573, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=11781, RX=109051904 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=11990, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=12199, RX=109576192 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>STATUS: ID=12407, RX=109051904 bytes/sec, TX=0 bytes/sec, ERR=0, RST=1, DERR=0
>
>Test done!
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <1024 blocks>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>2
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>30
>Attaching to: ugen2.7: <Kingston DataTraveler 3.0> at usbus2 @ iface 0
>Resetting device ...
>Testing SCSI commands ...
>Disk reports a capacity of LBA=60604415 and BS=512
>ERROR: CSW status: 1
>INFO: Prevent medium removal failed
>Highest readable LBA: 60604415 (not verified), Capacity is 31029 MBytes
>Highest testable LBA: 65535
>Setting up initial data pattern, LBA limit = 65535 ... SUCCESS
>Starting test ...
>
>ERROR: Data transfer: 4
>ERROR: do_msc_reset
>ERROR: CBW reception: 1
>ERROR: do_msc_reset
>ERROR: do_read_10
>Device disconnected
>
>Test done!
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <NO>
>        8) Toggle try invalid wrapper block: <NO>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <NO>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <YES>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>x
>[0.2] - Select Host Mode Test (via LibUSB):
>
>      1) Select USB device (VID=0x0951, PID=0x1666)
>      2) Manually enter USB vendor and product ID
>      3) Force FULL speed operation: <NO>
>      4) Mass Storage (UMASS)
>      5) Modem (UMODEM)
>     10) Start String Descriptor Test
>     11) Start Port Reset Test
>     12) Start Set Config Test
>     13) Start Get Descriptor Test
>     14) Start Suspend and Resume Test
>     15) Start Set and Clear Endpoint Stall Test
>     16) Start Set Alternate Interface Setting Test
>     17) Start Invalid Control Request Test
>     30) Duration: <60> seconds
>     x) Return to previous menu
>
>>x
>[0] - Select Computer Mode:
>
>   1) This computer is Running the Device Side
>   2) This computer is Running the Host Side
>   x) Return to previous menu
>
>>x

Actions: View

Attachments on bug 244356: 211891 | 211892 | 211911 | 211912 | 211914 | 211915 | 214426 | 214427 | 214428 | 214429 | 214430 | 214431 | 214432 | 214433 | 214454 | 214458 | 214464 | 214466 | 214468 | 214596 | 214609 | 214611 | 214612 | 214613 | 214626 | 214627 | 214628 | 214629 | 214630 | 214631 | 214632 | 214633 | 214634 | 214747 | 214817