Attachment 214596 Details for Bug 244356 – Output of usbtest

Output of usbtest

usbtest (text/plain), 17.44 KB, created by Maurizio on 2020-05-18 09:49:20 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Maurizio

Created: 2020-05-18 09:49:20 UTC

Size: 17.44 KB

patch

obsolete

>Script started on Mon May 18 11:32:54 2020
>Command: sudo /usr/obj/no_backup/root_src/NomadBSD/sys/usr/src/amd64.amd64/tools/tools/usbtest/usbtest
>[0] - Select Computer Mode:
>
>   1) This computer is Running the Device Side
>   2) This computer is Running the Host Side
>   x) Return to previous menu
>
>>2
>[0.2] - Select Host Mode Test (via LibUSB):
>
>      1) Select USB device (VID=0x0000, PID=0x0000)
>      2) Manually enter USB vendor and product ID
>      3) Force FULL speed operation: <NO>
>      4) Mass Storage (UMASS)
>      5) Modem (UMODEM)
>     10) Start String Descriptor Test
>     11) Start Port Reset Test
>     12) Start Set Config Test
>     13) Start Get Descriptor Test
>     14) Start Suspend and Resume Test
>     15) Start Set and Clear Endpoint Stall Test
>     16) Start Set Alternate Interface Setting Test
>     17) Start Invalid Control Request Test
>     30) Duration: <60> seconds
>     x) Return to previous menu
>
>>1
>
>[] Select USB device:
>       0) ugen0.1: <0x8086 XHCI root HUB> at usbus0
>       1) ugen1.1: <Intel EHCI root HUB> at usbus1
>       2) ugen0.2: <Generic EMV Smartcard Reader> at usbus0
>       3) ugen0.3: <vendor 0x8087 product 0x0a2a> at usbus0
>       4) ugen1.2: <vendor 0x8087 product 0x8001> at usbus1
>       5) ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0
>       6) ugen0.5: <Kingston DataTraveler 3.0> at usbus0
>       r) Refresh device list
>       x) Return to previous menu
>
>Enter integer value>6
>[0.2] - Select Host Mode Test (via LibUSB):
>
>      1) Select USB device (VID=0x0951, PID=0x1666)
>      2) Manually enter USB vendor and product ID
>      3) Force FULL speed operation: <NO>
>      4) Mass Storage (UMASS)
>      5) Modem (UMODEM)
>     10) Start String Descriptor Test
>     11) Start Port Reset Test
>     12) Start Set Config Test
>     13) Start Get Descriptor Test
>     14) Start Suspend and Resume Test
>     15) Start Set and Clear Endpoint Stall Test
>     16) Start Set Alternate Interface Setting Test
>     17) Start Invalid Control Request Test
>     30) Duration: <60> seconds
>     x) Return to previous menu
>
>>4
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <YES>
>        8) Toggle try invalid wrapper block: <YES>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <YES>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>30
>Attaching to: ugen0.5: <Kingston DataTraveler 3.0> at usbus0 @ iface 0
>Resetting device ...
>Testing SCSI commands ...
>Disk reports a capacity of LBA=60437491 and BS=512
>Trying invalid SCSI command: ERROR: Data transfer: 6
>Result as expected
>Trying invalid SCSI command: ERROR: Data transfer: 6
>Result as expected
>Trying invalid SCSI command: ERROR: Data transfer: 6
>Result as expected
>Trying invalid SCSI command: ERROR: Data transfer: 6
>Result as expected
>Trying invalid USB wrapper block signature: TIMEOUT: Trying to get CSW again. 8 tries left.
>ERROR: Could not read CSW: Stalled or timeout (4).
>Result as expected
>Trying invalid USB wrapper block signature: ERROR: Data transfer: 4
>Result as expected
>Trying invalid USB wrapper block signature: ERROR: Data transfer: 4
>Result as expected
>Trying invalid USB wrapper block signature: ERROR: Data transfer: 4
>Result as expected
>ERROR: CSW status: 1
>INFO: Prevent medium removal failed
>ERROR: Data transfer: 6
>INFO: Read Table Of Content failed
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Short data: 13 of 512 bytes
>ERROR: do_read_10
>Highest readable LBA: 33554431 (WRONG), Capacity is 17179 MBytes
>Highest testable LBA: 65535
>Setting up initial data pattern, LBA limit = 65535 ... SUCCESS
>Starting test ...
>
>STATUS: ID=63, RX=33496576 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=66, RX=100452864 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=69, RX=100535296 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=74, RX=110883328 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=79, RX=76680192 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=87, RX=92411904 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=97, RX=101963776 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=103, RX=93341184 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=109, RX=90120704 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=115, RX=106217984 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=119, RX=101543424 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=122, RX=96580096 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=126, RX=101984256 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=129, RX=73380864 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=134, RX=104443904 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=138, RX=96552448 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=142, RX=95972352 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=145, RX=96275456 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=150, RX=110310400 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=154, RX=75969536 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=161, RX=103479296 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=167, RX=91055104 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=175, RX=122383360 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=180, RX=78360576 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=186, RX=96778752 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=189, RX=91433472 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=195, RX=102746624 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=198, RX=97367040 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=206, RX=82573312 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=211, RX=103329280 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=217, RX=91095552 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=222, RX=99851776 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=227, RX=100154880 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=232, RX=97192960 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=235, RX=94771200 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=239, RX=87145984 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=248, RX=116768768 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=255, RX=78744064 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=262, RX=99977216 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=265, RX=86512640 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=271, RX=109920768 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=275, RX=98030592 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=281, RX=81975808 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=288, RX=99696128 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=297, RX=90529792 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=308, RX=122854400 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=311, RX=72530944 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=316, RX=104548352 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=320, RX=92710912 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=330, RX=101139456 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=335, RX=104775168 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=339, RX=82068992 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=344, RX=94491648 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=357, RX=95091200 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=363, RX=99509760 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=369, RX=90362368 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=376, RX=102516736 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=383, RX=83540992 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=388, RX=99288576 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=397, RX=115761152 bytes/sec, TX=0 bytes/sec, ERR=7, RST=17, DERR=0
>
>Test done!
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <YES>
>        8) Toggle try invalid wrapper block: <YES>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <YES>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>1
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Write Once, Read Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <YES>
>        8) Toggle try invalid wrapper block: <YES>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <YES>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>1
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Write Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <YES>
>        8) Toggle try invalid wrapper block: <YES>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <YES>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>30
>Attaching to: ugen0.5: <Kingston DataTraveler 3.0> at usbus0 @ iface 0
>Resetting device ...
>Testing SCSI commands ...
>Disk reports a capacity of LBA=60437491 and BS=512
>Trying invalid SCSI command: ERROR: Data transfer: 6
>Result as expected
>Trying invalid SCSI command: ERROR: Data transfer: 6
>Result as expected
>Trying invalid SCSI command: ERROR: Data transfer: 6
>Result as expected
>Trying invalid SCSI command: ERROR: Data transfer: 6
>Result as expected
>Trying invalid USB wrapper block signature: TIMEOUT: Trying to get CSW again. 8 tries left.
>ERROR: Could not read CSW: Stalled or timeout (4).
>Result as expected
>Trying invalid USB wrapper block signature: ERROR: Data transfer: 4
>Result as expected
>Trying invalid USB wrapper block signature: ERROR: Data transfer: 4
>Result as expected
>Trying invalid USB wrapper block signature: ERROR: Data transfer: 4
>Result as expected
>ERROR: CSW status: 1
>INFO: Prevent medium removal failed
>ERROR: Data transfer: 6
>INFO: Read Table Of Content failed
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Data transfer: 6
>ERROR: do_read_10
>ERROR: Short data: 13 of 512 bytes
>ERROR: do_read_10
>Highest readable LBA: 33554431 (WRONG), Capacity is 17179 MBytes
>Highest testable LBA: 65535
>Setting up initial data pattern, LBA limit = 65535 ... SUCCESS
>Starting test ...
>
>STATUS: ID=63, RX=0 bytes/sec, TX=11979264 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=64, RX=0 bytes/sec, TX=22708736 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=66, RX=0 bytes/sec, TX=33663488 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=67, RX=0 bytes/sec, TX=27960832 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=68, RX=0 bytes/sec, TX=30699520 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=69, RX=0 bytes/sec, TX=32126976 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=70, RX=0 bytes/sec, TX=32840704 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=71, RX=0 bytes/sec, TX=33197568 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=72, RX=0 bytes/sec, TX=33317888 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=73, RX=0 bytes/sec, TX=33436160 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=74, RX=0 bytes/sec, TX=33437184 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=75, RX=0 bytes/sec, TX=16660480 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=76, RX=0 bytes/sec, TX=25107456 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=77, RX=0 bytes/sec, TX=12553728 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=78, RX=0 bytes/sec, TX=6218752 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=81, RX=0 bytes/sec, TX=30461952 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=83, RX=0 bytes/sec, TX=48752128 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=84, RX=0 bytes/sec, TX=13659648 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=85, RX=0 bytes/sec, TX=6771712 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=87, RX=0 bytes/sec, TX=30186496 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=89, RX=0 bytes/sec, TX=49315328 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=90, RX=0 bytes/sec, TX=13792256 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=92, RX=0 bytes/sec, TX=27063296 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=93, RX=0 bytes/sec, TX=26802688 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=94, RX=0 bytes/sec, TX=13343232 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=95, RX=0 bytes/sec, TX=23390720 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=96, RX=0 bytes/sec, TX=28414464 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=97, RX=0 bytes/sec, TX=30926336 bytes/sec, ERR=7, RST=17, DERR=0
>STATUS: ID=98, RX=0 bytes/sec, TX=15405056 bytes/sec, ERR=7, RST=17, DERR=0
>
>Test done!
>[0.2.4] - Mass Storage Test Parameters:
>
>        1) Toggle I/O mode: <Write Only>
>        2) Toggle I/O size: <Random>
>        3) Toggle I/O delay: <None>
>        4) Toggle I/O offset: <Start Of Disk>
>        5) Toggle I/O area: <Complete Disk>
>        6) Toggle I/O pattern: <Fixed>
>        7) Toggle try invalid SCSI command: <YES>
>        8) Toggle try invalid wrapper block: <YES>
>        9) Toggle try invalid MaxPacketSize: <NO>
>       10) Toggle try last Logical Block Address: <YES>
>       11) Toggle I/O lun: <0>
>       12) Set maximum number of errors: <-1>
>       13) Set test duration: <60> seconds
>       14) Toggle try aborted write transfer: <NO>
>       15) Toggle request sense on error: <NO>
>       16) Toggle try all LUN: <NO>
>       17) Toggle try too short wrapper block: <NO>
>       20) Reset parameters
>       30) Start test (VID=0x0951, PID=0x1666)
>       40) Select another device
>        x) Return to previous menu 
>
>>x
>[0.2] - Select Host Mode Test (via LibUSB):
>
>      1) Select USB device (VID=0x0951, PID=0x1666)
>      2) Manually enter USB vendor and product ID
>      3) Force FULL speed operation: <NO>
>      4) Mass Storage (UMASS)
>      5) Modem (UMODEM)
>     10) Start String Descriptor Test
>     11) Start Port Reset Test
>     12) Start Set Config Test
>     13) Start Get Descriptor Test
>     14) Start Suspend and Resume Test
>     15) Start Set and Clear Endpoint Stall Test
>     16) Start Set Alternate Interface Setting Test
>     17) Start Invalid Control Request Test
>     30) Duration: <60> seconds
>     x) Return to previous menu
>
>>x
>[0] - Select Computer Mode:
>
>   1) This computer is Running the Device Side
>   2) This computer is Running the Host Side
>   x) Return to previous menu
>
>>x
>
>Command exit status: 0
>Script done on Mon May 18 11:36:52 2020

Actions: View

Attachments on bug 244356: 211891 | 211892 | 211911 | 211912 | 211914 | 211915 | 214426 | 214427 | 214428 | 214429 | 214430 | 214431 | 214432 | 214433 | 214454 | 214458 | 214464 | 214466 | 214468 | 214596 | 214609 | 214611 | 214612 | 214613 | 214626 | 214627 | 214628 | 214629 | 214630 | 214631 | 214632 | 214633 | 214634 | 214747 | 214817