Attachment 215771 Details for Bug 247288 – dimes.boot output text

dimes.boot output text

dmesg.boot (text/plain), 9.82 KB, created by pmueller@occsilva.de on 2020-06-19 10:59:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: pmueller@occsilva.de

Created: 2020-06-19 10:59:07 UTC

Size: 9.82 KB

patch

obsolete

>---<<BOOT>>---
>Copyright (c) 1992-2019 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.1-RELEASE-p5 GENERIC amd64
>FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
>VT(vga): resolution 640x480
>sysctl_warn_reuse: can't re-use a leaf (debug.hwpstate_verbose)!
>sysctl_warn_reuse: can't re-use a leaf (debug.hwpstate_verify)!
>module_register: cannot register cpu/ichss from kernel; already loaded from cpufreq.ko
>Module cpu/ichss failed to register: 17
>module_register: cannot register cpu/powernow from kernel; already loaded from cpufreq.ko
>Module cpu/powernow failed to register: 17
>module_register: cannot register cpu/est from kernel; already loaded from cpufreq.ko
>Module cpu/est failed to register: 17
>module_register: cannot register cpu/hwpstate from kernel; already loaded from cpufreq.ko
>Module cpu/hwpstate failed to register: 17
>module_register: cannot register cpu/p4tcc from kernel; already loaded from cpufreq.ko
>Module cpu/p4tcc failed to register: 17
>CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)
>  Origin="AuthenticAMD"  Id=0x100f63  Family=0x10  Model=0x6  Stepping=3
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x802009<SSE3,MON,CX16,POPCNT>
>  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
>  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
>  SVM: NP,NRIP,NAsids=64
>  TSC: P-state invariant
>real memory  = 6442450944 (6144 MB)
>avail memory = 6059257856 (5778 MB)
>Event timer "LAPIC" quality 100
>ACPI APIC Table: <HP     ProLiant>
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 2 core(s)
>random: unblocking device.
>Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20181213/tbfadt-748)
>ioapic0 <Version 2.1> irqs 0-23 on motherboard
>Launching APs: 1
>Timecounter "TSC" frequency 1497539525 Hz quality 800
>random: entropy device external interface
>kbd1 at kbdmux0
>000.000023 [4335] netmap_init               netmap: loaded module
>[ath_hal] loaded
>module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>acpi0: <HP ProLiant> on motherboard
>acpi0: Power Button (fixed)
>cpu0: <ACPI CPU> on acpi0
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 950
>Event timer "HPET" frequency 14318180 Hz quality 550
>Event timer "HPET1" frequency 14318180 Hz quality 450
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xf0000000-0xf7ffffff,0xfe7f0000-0xfe7fffff,0xfe600000-0xfe6fffff irq 18 at device 5.0 on pci1
>vgapci0: Boot video device
>pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>em0: <Intel(R) PRO/1000 Network Connection> port 0xe800-0xe81f mem 0xfe8e0000-0xfe8fffff,0xfe800000-0xfe87ffff,0xfe8dc000-0xfe8dffff irq 16 at device 0.0 on pci2
>em0: Using 1024 TX descriptors and 1024 RX descriptors
>em0: Using 2 RX queues 2 TX queues
>em0: Using MSI-X interrupts with 3 vectors
>em0: Ethernet address: 68:05:ca:11:d0:18
>em0: netmap queues/slots: TX 2/1024, RX 2/1024
>pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci3
>bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
>miibus0: <MII bus> on bge0
>brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>bge0: Using defaults for TSO: 65518/35/2048
>bge0: Ethernet address: a0:b3:cc:eb:14:fa
>ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe5ffc00-0xfe5fffff irq 19 at device 17.0 on pci0
>ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported
>ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich2: <AHCI channel> at channel 2 on ahci0
>ahcich3: <AHCI channel> at channel 3 on ahci0
>ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fe000-0xfe5fefff irq 18 at device 18.0 on pci0
>usbus0 on ohci0
>usbus0: 12Mbps Full Speed USB v1.0
>ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0
>usbus1: EHCI version 1.0
>usbus1 on ehci0
>usbus1: 480Mbps High Speed USB v2.0
>ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 18 at device 19.0 on pci0
>usbus2 on ohci1
>usbus2: 12Mbps Full Speed USB v1.0
>ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 17 at device 19.2 on pci0
>usbus3: EHCI version 1.0
>usbus3 on ehci1
>usbus3: 480Mbps High Speed USB v2.0
>atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
>ata0: <ATA channel> at channel 0 on atapci0
>ata1: <ATA channel> at channel 1 on atapci0
>isab0: <PCI-ISA bridge> at device 20.3 on pci0
>isa0: <ISA bus> on isab0
>pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>pci4: <ACPI PCI bus> on pcib4
>ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 22.0 on pci0
>usbus4 on ohci2
>usbus4: 12Mbps Full Speed USB v1.0
>ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5ff000-0xfe5ff0ff irq 17 at device 22.2 on pci0
>usbus5: EHCI version 1.0
>usbus5 on ehci2
>usbus5: 480Mbps High Speed USB v2.0
>acpi_button0: <Power Button> on acpi0
>orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0
>hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>ugen4.1: <ATI OHCI root HUB> at usbus4
>ugen5.1: <ATI EHCI root HUB> at usbus5
>uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
>ugen2.1: <ATI OHCI root HUB> at usbus2
>ugen3.1: <ATI EHCI root HUB> at usbus3
>uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>ugen1.1: <ATI EHCI root HUB> at usbus1
>ugen0.1: <ATI OHCI root HUB> at usbus0
>uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>uhub0: 4 ports with 4 removable, self powered
>uhub2: 5 ports with 5 removable, self powered
>uhub5: 5 ports with 5 removable, self powered
>uhub1: 4 ports with 4 removable, self powered
>uhub3: 5 ports with 5 removable, self powered
>uhub4: 5 ports with 5 removable, self powered
>ugen2.2: <American Power Conversion Back-UPS CS 350 FW:807.q10 .I USB FW:q10> at usbus2
>ugen0.2: <CTI GmbH Serial Converter> at usbus0
>uftdi0 on uhub5
>uftdi0: <Serial Converter> on usbus0
>ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>ada0: <Hitachi HDS5C3020ALA632 ML6OA580> ATA8-ACS SATA 3.x device
>ada0: Serial Number ML0220F30MJ0WD
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada0: Command Queueing enabled
>ada0: 1907729MB (3907029168 512 byte sectors)
>ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
>ada1: <Hitachi HDS5C3020ALA632 ML6OA580> ATA8-ACS SATA 3.x device
>ada1: Serial Number ML0220F30KSUMD
>ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada1: Command Queueing enabled
>ada1: 1907729MB (3907029168 512 byte sectors)
>ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
>ada2: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
>ada2: Serial Number WD-WCC7K3EJ85L1
>ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada2: Command Queueing enabled
>ada2: 3815447MB (7814037168 512 byte sectors)
>ada2: quirks=0x1<4K>
>ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
>ada3: <WDC WD30EFRX-68AX9N0 80.00A80> ACS-2 ATA SATA 3.x device
>ada3: Serial Number WD-WCC1T0762495
>ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada3: Command Queueing enabled
>ada3: 2861588MB (5860533168 512 byte sectors)
>ada3: quirks=0x1<4K>
>Trying to mount root from zfs:zroot/ROOT []...
>GEOM_ELI: Device ada0p2.eli created.
>GEOM_ELI: Encryption: AES-XTS 128
>GEOM_ELI:     Crypto: software
>GEOM_ELI: Device ada1p2.eli created.
>GEOM_ELI: Encryption: AES-XTS 128
>GEOM_ELI:     Crypto: software
>lo0: link state changed to UP
>em0: link state changed to UP
>intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
>smbus0: <System Management Bus> on intsmb0
>CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)
>  Origin="AuthenticAMD"  Id=0x100f63  Family=0x10  Model=0x6  Stepping=3
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x802009<SSE3,MON,CX16,POPCNT>
>  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
>  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
>  SVM: NP,NRIP,NAsids=64
>  TSC: P-state invariant

Actions: View

Attachments on bug 247288: 215771