Attachment 218495 Details for Bug 249860 – Proposed patch

[patch] Proposed patch

bug_249860.patch (text/plain), 9.73 KB, created by Corey Halpin on 2020-10-03 18:23:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Corey Halpin

Created: 2020-10-03 18:23:35 UTC

Size: 9.73 KB

patch

obsolete

>Index: mail/fetchmailconf/Makefile
>===================================================================
>--- mail/fetchmailconf/Makefile	(revision 550184)
>+++ mail/fetchmailconf/Makefile	(working copy)
>@@ -1,6 +1,7 @@
> # $FreeBSD$
> 
> PORTNAME=	fetchmailconf
>+PORTREVISION=	0
> DISTNAME=	fetchmail-${DISTVERSIONPREFIX}${DISTVERSION}${DISTVERSIONSUFFIX}
> # NOTE: MASTER_SITES in ../fetchmail must NOT use the $PORTNAME variable,
> # else _this_ port (fetchmailconf) becomes unfetchable
>Index: mail/fetchmail/Makefile
>===================================================================
>--- mail/fetchmail/Makefile	(revision 550184)
>+++ mail/fetchmail/Makefile	(working copy)
>@@ -3,6 +3,7 @@
> 
> PORTNAME?=	fetchmail
> DISTVERSION=	6.4.12
>+PORTREVISION?=	1
> CATEGORIES=	mail
> # The next line is inherited by the fetchmailconf slave port,
> # do NOT replace fetchmail by ${PORTNAME}
>Index: mail/fetchmail/files/fetchmail.in
>===================================================================
>--- mail/fetchmail/files/fetchmail.in	(revision 550184)
>+++ mail/fetchmail/files/fetchmail.in	(working copy)
>@@ -15,15 +15,30 @@
> #
> # There are two variants:
> #
>+#  Note that there are two variables with only very slightly
>+#  different names, fetchmail_user and fetchmail_users
>+#  (mind the trailing plural-'s').
>+#
> #  * Single system-wide fetchmail daemon:
>+#    - This mode applies if the 'fetchmail_users' variable
>+#      is unset or empty.
> #    - It is run as user `fetchmail_user' (default: fetchmail)
> #      Note: The directory /var/run/fetchmail must be writable for
> #            'fetchmail_user'.
> #    - All configuration is contained in one global file
> #      'fetchmail_config' (default: %%PREFIX%%/etc/fetchmailrc)
>-#      that must be owned by 'fetchmail_user' (mode 700)
>+#      that must be owned by 'fetchmail_user' and access mode
>+#      may not be more than 700.
> #    - The fetchmail daemon awakes to fetch mail every 
> #      'fetchmail_polling_interval' seconds (default: 900).
>+#        Note that a "set daemon 123" in the file $fetchmail_config
>+#      takes precedence. The rc.conf value is only a fall-back.
>+#    - The fetchmail logs will go to the syslog by default, but
>+#      you can override it to a file by setting 
>+#      'fetchmail_logging_facility=--logfile=/path/to/logfile'
>+#      in the rcfile or set logfile /path/to/logfile in the $fetchmail_config
>+#      file.  The log-file must pre-exist and be writable by the
>+#      'fetchmail_user'.
> #
> #  * Per-user daemon
> #    - Users for which a fetchmail daemon is to be started must be
>@@ -30,16 +45,17 @@
> #      listed in 'fetchmail_users', e.g. fetchmail_users="user1 user2"
> #      The 'fetchmail_user' (sic!) variable is ignored in this
> #      configuration variant.
>-#    - The config files for the individual users must be located at
>-#      ${fetchmail_home_prefix}/${user}/${fetchmail_config_name}. The
>-#      default for 'fetchmail_home_prefix' is "/home", and that for
>-#      'fetchmail_config_name' is ".fetchmailrc".
>-#    - Note that "${fetchmail_home_prefix}/${user}" must be writable
>-#      for ${user} since it is used to store the per-user PID files!
>-#    - There are user-specific versions of 'fetchmail_config' and
>-#      'fetchmail_polling_interval' that can be used to override the
>-#      defaults, i.e. for the user 'user1' there are variables
>-#      'fetchmail_user1_config' and 'fetchmail_user1_polling_interval'
>+#    - The config files for the individual users must be located in
>+#      the fetchmail_user's home directory as ${fetchmail_config_name}. The
>+#      default for 'fetchmail_config_name' is ".fetchmailrc".
>+#    - There are user-specific versions of 'fetchmail_config',
>+#      'fetchmail_logging_facility' and 'fetchmail_polling_interval' as well as
>+#      the usual rc.subr variables that can be used to override the defaults,
>+#      i.e. for the user 'user1' there are variables 'fetchmail_user1_config'
>+#      and 'fetchmail_user1_polling_interval', or fetchmail_user1_env to
>+#      set user-daemon specific environment variables.
>+#        Note that a "set daemon 123" in the config file (.fetchmailrc
>+#      by default) takes precedence. The rc.conf value is only a fall-back.
> #    - All commands (e.g. start, stop, awaken (see below)) can be either
> #      passed to all instances of the daemon (if %%PREFIX%%/etc/rc.d/fetchmail)
> #      is run as root), or just to the instance belonging to the respective
>@@ -54,11 +70,17 @@
> #
> # In any case, you will need a working fetchmailrc file. Please consult
> # the man page fetchmail(1), the documentation in %%PREFIX%%/share/doc/fetchmail/
>-# and/or the material found at <http://www.fetchmail.info/>.
>+# and/or the material found at <https://www.fetchmail.info/> or
>+# <https://fetchmail.sourceforge.io/>.
> 
> . /etc/rc.subr
> 
>+# prevent reading passwords from the boot console
>+exec < /dev/null
>+
> name=fetchmail
>+# note we do not override name for instances, because we want to have a fallback
>+# to global defaults.  Check for PULLVARS below.
> rcvar=fetchmail_enable
> 
> command=%%PREFIX%%/bin/${name}
>@@ -71,11 +93,11 @@
> # read settings, set default values
> load_rc_config "$name"
> : ${fetchmail_enable="NO"}
>+: ${fetchmail_flags=""}
> : ${fetchmail_user="fetchmail"}
> : ${fetchmail_config="%%PREFIX%%/etc/fetchmailrc"}
> : ${fetchmail_polling_interval="900"}
> : ${fetchmail_logging_facility="--syslog"}
>-: ${fetchmail_home_prefix="/home"}
> : ${fetchmail_config_name=".fetchmailrc"}
> 
> # send signal to fetchmail process(es) to check for new mail immediately
>@@ -91,60 +113,93 @@
> 	return
> }
> 
>-if [ -n "$2" ]; then
>-	# perform action for an instance of fetchmail daemon
>-        user="$2"
>-        if [ "x${fetchmail_users}" != "x" -o "x$3" = "xGLOBALCONFIG"  ]; then
>-		if [ "x${fetchmail_users}" != "x" ]; then
>-			# multiuser setup:  determine user specific config and pid file
>-			eval fetchmail_config="\${fetchmail_${user}_config:-${fetchmail_home_prefix}/${user}}/${fetchmail_config_name}"
>-			eval pidfile="${fetchmail_home_prefix}/${user}/.fetchmail.pid"
>-			eval fetchmail_user=$user
>-		else
>-			eval pidfile=/var/run/fetchmail/fetchmail.pid
>-		fi
>-		required_files=${fetchmail_config}
>-		eval fetchmail_polling_interval="\${fetchmail_${user}_polling_interval:-${fetchmail_polling_interval}}"
>-		fetchmail_flags="-f ${fetchmail_config} \
>-				--pidfile ${pidfile} \
>-				-d ${fetchmail_polling_interval} \
>-				${fetchmail_logging_facility}"
>-        else
>-                echo "$0: extra argument ignored"
>-        fi
>-else
>-	uid=`id -u`
>-        if [ "x${fetchmail_users}" != "x" -a "x$1" != "x" -a "$uid" = "0" ]; then
>+# query a value from the fetchmail config file, value specified in first argument
>+fetchmail_dump_config()
>+{
>+	su -m ${fetchmail_user} -c sh -c "fetchmail -f ${fetchmail_config} --configdump" | fgrep $1 | cut -d: -f2
>+}
>+
>+# arguments:
>+# ACTION - perform ACTION for the one global daemon
>+# ACTION USER GLOBALCONFIG - ditto, inside the recursive call
>+# ACTION USER - perform ACTION for the USER-specific daemon, inside recursive call
>+
>+# if this is the global or 'umbrella' run
>+if [ -z "$2" ] ; then
>+	uid=$(id -u)
>+	if [ "x${fetchmail_users}" != "x" -a "x$1" != "x" -a "$uid" = "0" ]; then
> 		# root mode: multiple user profiles are handled by recursive
> 		# calls of this script
> 		for user in ${fetchmail_users}; do
> 			echo "===> fetchmail user: ${user}"
>-			$fetchmail_script $1 ${user}
>+			$fetchmail_script "$1" "${user}"
> 			retcode="$?"
> 			if [ "0${retcode}" -ne 0 ]; then
> 				failed="${user} (${retcode}) ${failed:-}"
>-			else
>-				success="${user} ${success:-}"
> 			fi
> 		done
>-		exit 0
> 	else
> 		if [ "x${fetchmail_users}" = "x" ]; then
> 			# There is only one global configuration file
> 			globalconfig=GLOBALCONFIG
> 		fi
>-		$fetchmail_script $1 `id -u -n` $globalconfig
>+		$fetchmail_script "$1" "$(id -u -n)" $globalconfig
> 		retcode="$?"
> 		if [ "0${retcode}" -ne 0 ]; then
>-			failed="${user} (${retcode}) ${failed:-}"
>-			exit 1
>-		else
>-			success="${user} ${success:-}"
>+			failed="${name} (${retcode}) ${failed:-}"
> 		fi
>-		exit 0
>         fi
>+
>+	# if we had any failures, exit witn an error
>+	if [ -n "${failed}" ] ; then
>+		exit 1
>+	fi
>+
>+	# otherwise, exit success
>+	exit 0
> fi
> 
>+# perform action for an instance of fetchmail daemon
>+fetchmail_user="$2"
>+if [ "x${fetchmail_users}" != "x" -o "x$3" = "xGLOBALCONFIG" ]; then
>+	if [ "x${fetchmail_users}" != "x" ]; then
>+		# multiuser setup:  determine user specific config and pid file
>+		fetchmail_home="$(getent passwd ${fetchmail_user} | cut -f6 -d:)"
>+		fetchmail_home="${fetchmail_home%/}"
>+		fetchmail_config="${fetchmail_home}/${fetchmail_config_name}"
>+		pidfile="${fetchmail_home}/.fetchmail.pid"
>+		# PULLVARS - pull user specific variables into scope if existing
>+		# else use global defaults
>+		for i in chdir chroot env env_file fib flags nice \
>+			limits login_class oomprotect program user group groups prepend \
>+			logging_facility polling_interval
>+		do
>+			uvarname=fetchmail_${fetchmail_user}_${i}
>+	 		eval fetchmail_${i}="\${${uvarname}-\${fetchmail_${i}}}"
>+		done
>+	else
>+		pidfile=/var/run/fetchmail/fetchmail.pid
>+	fi
>+	required_files=${fetchmail_config}
>+
>+	# add early command line arguments
>+	# if logfile set in config file, do not override with rc.conf default (note logfile overrides syslog)
>+	_logfile="$(fetchmail_dump_config logfile)"
>+	if [ _"${_logfile}" != _"None," ] ; then
>+		fetchmail_logging_facility=""
>+	fi
>+
>+	fetchmail_flags="${fetchmail_flags} -f ${fetchmail_config} --pidfile ${pidfile} ${fetchmail_logging_facility}"
>+
>+	# add late command line arguments
>+	# if no polling interval in config file, use value from rc.conf
>+	if [ "$(fetchmail_dump_config poll_interval)" = "0," ] ; then
>+		fetchmail_flags="${fetchmail_flags} -d ${fetchmail_polling_interval}"
>+	fi
>+else
>+	echo "$0: extra argument ignored"
>+fi
>+
> # actually execute the fetchmail program
> export FETCHMAILUSER=$fetchmail_user
> run_rc_command "$1"

Actions: View | Diff

Attachments on bug 249860: 218297 | 218317 | 218495