Attachment 230433 Details for Bug 258156 – Requested information from affected system

Requested information from affected system

bug258156_request.txt (text/plain), 8.88 KB, created by Eric Rucker on 2021-12-26 23:55:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Eric Rucker

Created: 2021-12-26 23:55:51 UTC

Size: 8.88 KB

patch

obsolete

>FreeBSD uncannyvalley.bhtooefr.org 12.2-RELEASE-p7 FreeBSD 12.2-RELEASE-p7 GENERIC  amd64
>---<<BOOT>>---
>Copyright (c) 1992-2020 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.2-RELEASE-p7 GENERIC amd64
>FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
>VT(vga): resolution 640x480
>CPU: Intel(R) Xeon(R) CPU           L5420  @ 2.50GHz (2500.14-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0x1067a  Family=0x6  Model=0x17  Stepping=10
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0xc0ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE,OSXSAVE>
>  AMD Features=0x20100800<SYSCALL,NX,LM>
>  AMD Features2=0x1<LAHF>
>  VT-x: HLT,PAUSE
>  TSC: P-state invariant, performance statistics
>real memory  = 17179869184 (16384 MB)
>avail memory = 16614834176 (15845 MB)
>Event timer "LAPIC" quality 100
>ACPI APIC Table: <100509 APIC1012>
>FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>FreeBSD/SMP: 2 package(s) x 4 core(s)
>random: unblocking device.
>Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20200430/tbfadt-748)
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>Launching APs: 2 1 3 4 5 7 6
>Timecounter "TSC-low" frequency 1250070956 Hz quality 1000
>random: entropy device external interface
>kbd1 at kbdmux0
>000.000023 [4336] netmap_init               netmap: loaded module
>[ath_hal] loaded
>module_register_init: MOD_LOAD (vesa, 0xffffffff81115e70, 0) error 19
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>acpi0: <100509 XSDT1012> on motherboard
>acpi0: Power Button (fixed)
>unknown: I/O range not supported
>cpu0: <ACPI CPU> on acpi0
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 950
>Event timer "HPET" frequency 14318180 Hz quality 350
>Event timer "HPET1" frequency 14318180 Hz quality 340
>Event timer "HPET2" frequency 14318180 Hz quality 340
>Event timer "HPET3" frequency 14318180 Hz quality 340
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>em0: <Intel(R) PRO/1000 Network Connection> port 0xbc00-0xbc1f mem 0xdf1c0000-0xdf1dffff,0xdf1fe000-0xdf1fefff irq 20 at device 25.0 on pci0
>em0: Using 1024 TX descriptors and 1024 RX descriptors
>em0: Using an MSI interrupt
>em0: Ethernet address: 00:23:8b:8a:90:02
>em0: netmap queues/slots: TX 1/1024, RX 1/1024
>uhci0: <Intel 82801I (ICH9) USB controller> port 0xb880-0xb89f irq 23 at device 26.0 on pci0
>uhci0: LegSup = 0x2f00
>usbus0 on uhci0
>usbus0: 12Mbps Full Speed USB v1.0
>ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf1ff800-0xdf1ffbff irq 21 at device 26.7 on pci0
>usbus1: EHCI version 1.0
>usbus1 on ehci0
>usbus1: 480Mbps High Speed USB v2.0
>pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>pci5: <ACPI PCI bus> on pcib5
>mpt0: <LSILogic SAS/SATA Adapter> port 0xc000-0xc0ff mem 0xdf5fc000-0xdf5fffff,0xdf5e0000-0xdf5effff irq 16 at device 0.0 on pci5
>mpt0: MPI Version=1.5.14.0
>mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
>mpt0: 0 Active Volumes (2 Max)
>mpt0: 0 Hidden Drive Members (14 Max)
>pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
>pci6: <ACPI PCI bus> on pcib6
>em1: <Intel(R) PRO/1000 Network Connection> port 0xdc00-0xdc1f mem 0xdf6e0000-0xdf6fffff irq 16 at device 0.0 on pci6
>em1: Using 1024 TX descriptors and 1024 RX descriptors
>em1: Using an MSI interrupt
>em1: Ethernet address: 00:23:8b:8a:90:03
>em1: netmap queues/slots: TX 1/1024, RX 1/1024
>uhci1: <Intel 82801I (ICH9) USB controller> port 0xb800-0xb81f irq 23 at device 29.0 on pci0
>uhci1: LegSup = 0x2f00
>usbus2 on uhci1
>usbus2: 12Mbps Full Speed USB v1.0
>uhci2: <Intel 82801I (ICH9) USB controller> port 0xb480-0xb49f irq 22 at device 29.1 on pci0
>uhci2: LegSup = 0x2f00
>usbus3 on uhci2
>usbus3: 12Mbps Full Speed USB v1.0
>uhci3: <Intel 82801I (ICH9) USB controller> port 0xb400-0xb41f irq 21 at device 29.2 on pci0
>uhci3: LegSup = 0x2f00
>usbus4 on uhci3
>usbus4: 12Mbps Full Speed USB v1.0
>ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf1ff400-0xdf1ff7ff irq 23 at device 29.7 on pci0
>usbus5: EHCI version 1.0
>usbus5 on ehci1
>usbus5: 480Mbps High Speed USB v2.0
>pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci7: <ACPI PCI bus> on pcib7
>vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xdf800000-0xdfffffff,0xdf7e0000-0xdf7fffff irq 18 at device 3.0 on pci7
>vgapci0: Boot video device
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>acpi_button0: <Sleep Button> on acpi0
>acpi_button1: <Power Button> on acpi0
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 drq 0 on acpi0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xcf000-0xcffff pnpid ORM0000 on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
>coretemp0: <CPU On-Die Thermal Sensors> on cpu0
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>vboxdrv: fAsync=0 offMin=0x429 offMax=0x6e28
>ugen2.1: <Intel UHCI root HUB> at usbus2
>ugen3.1: <Intel UHCI root HUB> at usbus3
>ugen4.1: <Intel UHCI root HUB> at usbus4
>ugen1.1: <Intel EHCI root HUB> at usbus1
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>ugen5.1: <Intel EHCI root HUB> at usbus5
>Trying to mount root from zfs:zroot/ROOT []...
>Root mount waiting for: usbus0 usbus1 CAM usbus2 usbus3 usbus4 usbus5
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
>ugen0.1: <Intel UHCI root HUB> at usbus0
>uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>da2 at mpt0 bus 0 scbus0 target 3 lun 0
>da2: <TOSHIBA MG03SCA200 0108> Fixed Direct Access SPC-3 SCSI device
>da2: Serial Number 7490A017FTP6
>da2: 300.000MB/s transfers
>da2: Command Queueing enabled
>da2: 1907729MB (3907029168 512 byte sectors)
>da0 at mpt0 bus 0 scbus0 target 0 lun 0
>da0: <ATA Samsung SSD 860 4B6Q> Fixed Direct Access SPC-3 SCSI device
>da0: Serial Number S597NJ0N706341X     
>da0: 300.000MB/s transfers
>da0: Command Queueing enabled
>da0: 1907729MB (3907029168 512 byte sectors)
>da1 at mpt0 bus 0 scbus0 target 2 lun 0
>da1: <ATA Samsung SSD 860 4B6Q> Fixed Direct Access SPC-3 SCSI device
>da1: Serial Number S597NJ0N708097M     
>da1: 300.000MB/s transfers
>da1: Command Queueing enabled
>da1: 1907729MB (3907029168 512 byte sectors)
>uhub1: 2 ports with 2 removable, self powered
>uhub0: 2 ports with 2 removable, self powered
>uhub3: 2 ports with 2 removable, self powered
>uhub5: 2 ports with 2 removable, self powered
>da3 at mpt0 bus 0 scbus0 target 1 lun 0
>da3: <ATA Samsung SSD 860 4B6Q> Fixed Direct Access SPC-3 SCSI device
>da3: Serial Number S597NJ0N706372F     
>da3: 300.000MB/s transfers
>da3: Command Queueing enabled
>da3: 1907729MB (3907029168 512 byte sectors)
>GEOM_MIRROR: Device mirror/swap launched (3/3).
>uhub2: 2 ports with 2 removable, self powered
>Root mount waiting for: usbus5
>Root mount waiting for: usbus5
>uhub4: 6 ports with 6 removable, self powered
>ugen0.2: <VIRTUAL USB MULTIMEDIA KEYBOARD> at usbus0
>ukbd0 on uhub5
>ukbd0: <VIRTUAL USB MULTIMEDIA KEYBOARD, class 0/0, rev 1.10/0.01, addr 2> on usbus0
>kbd2 at ukbd0
>ugen2.2: <American Power Conversion Smart-UPS  X138 FW:667.1X138.D USB FW:11.01> at usbus2
>lo0: link state changed to UP
>em0: link state changed to UP
>ums0 on uhub5
>ums0: <VIRTUAL USB MULTIMEDIA KEYBOARD, class 0/0, rev 1.10/0.01, addr 2> on usbus0
>ums0: 3 buttons and [XYZ] coordinates ID=0
>ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled

Actions: View

Attachments on bug 258156: 227543 | 230433 | 230461