Attachment 230635 Details for Bug 260868 – boot verbose with first patch applied

boot verbose with first patch applied

bootv-with-patch1.txt (text/plain), 14.75 KB, created by mike on 2022-01-02 20:12:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mike

Created: 2022-01-02 20:12:32 UTC

Size: 14.75 KB

patch

obsolete

>
>boot verbose with first patch applied
>
>
>OK boot -v
>---<<BOOT>>---
>Copyright (c) 1992-2021 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 13.0-STABLE #0 stable/13-375fdb6e1: Sun Jan  2 05:23:01 EST 2022
>    root@nano13-i386.sentex.ca:/usr/obj/nanobsd.alix2b/usr/src/i386.i386/sys/alix i386
>FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
>VT(vga): resolution 640x480
>Preloaded elf kernel "/boot/kernel/kernel" at 0x132c000.
>Preloaded elf module "/boot/kernel/u3g.ko" at 0x13348ac.
>Preloaded boot_entropy_cache "/boot/entropy" at 0x1334cf4.
>Preloaded TSLOG data "TSLOG" at 0x1334d40.
>Early TSC frequency 498076650Hz calibrated from 8254 PIT
>CPU: Geode(TM) Integrated Processor by AMD PCS (498.08-MHz 586-class CPU)
>  Origin="AuthenticAMD"  Id=0x5a2  Family=0x5  Model=0xa  Stepping=2
>  Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
>  AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!>
>L1 2MB data TLB: 0 entries, 0-way associative
>L1 2MB instruction TLB: 0 entries, 0-way associative
>L1 4KB data TLB: 16 entries, fully associative
>L1 4KB instruction TLB: 16 entries, fully associative
>L1 data cache: 64 kbytes, 32 bytes/line, 1 lines/tag, 16-way associative
>L1 instruction cache: 64 kbytes, 32 bytes/line, 1 lines/tag, 16-way associative
>L2 2MB unified TLB: 4 entries, disabled/not present
>L2 4KB unified TLB: 0 entries, disabled/not present
>L2 unified cache: 128 kbytes, 32 bytes/line, 1 lines/tag, 4-way associative
>Write Allocate Disable
>real memory  = 268435456 (256 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
>0x0000000000100000 - 0x00000000007fffff, 7340032 bytes (1792 pages)
>0x0000000001429000 - 0x000000000fbb4fff, 242794496 bytes (59276 pages)
>avail memory = 249569280 (238 MB)
>bios32: Found BIOS32 Service Directory header at 0x4fd110
>bios32: Entry = 0xfd0e4 (4fd0e4)  Rev = 0  Len = 1
>pcibios: PCI BIOS entry at 0xf0000+0xcf35
>pnpbios: Bad PnP BIOS data checksum
>Other BIOS signatures found:
>random: read 4096 bytes from preloaded cache
>random: unblocking device.
>hostuuid: using 00000000-0000-0000-0000-000000000000
>ULE: setup cpu 0
>random: entropy device external interface
>null: <full device, null device, zero device>
>io: <I/O>
>crypto: <crypto core>
>kbd0 at kbdmux0
>mem: <memory>
>K6-family MTRR support enabled (2 registers)
>vtvga0: <VT VGA driver>
>crypto: assign cryptosoft0 driver id 0, flags 0x6000000
>pci_open(1):    mode 1 addr port (0x0cf8) is 0x00000000
>pci_open(1a):   mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:   device 0 1 [class=060000] [hdr=80] is there (id=20801022)
>pcibios: BIOS version 2.10
>pcib0 pcibus 0
>pci0: <PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found-> vendor=0x1022, dev=0x2080, revid=0x33
>        domain=0, bus=0, slot=1, func=0
>        class=06-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0005, statreg=0x0220, cachelnsz=8 (dwords)
>        lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        map[10]: type I/O Port, range 32, base 0xac1c, size  2, enabled
>found-> vendor=0x1022, dev=0x2082, revid=0x00
>        domain=0, bus=0, slot=1, func=2
>        class=10-10-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0006, statreg=0x02a0, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=9
>        map[10]: type Memory, range 32, base 0xefff4000, size 14, enabled
>found-> vendor=0x1106, dev=0x3053, revid=0x96
>        domain=0, bus=0, slot=9, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0097, statreg=0x0210, cachelnsz=8 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
>        intpin=a, irq=10
>        powerspec 2  supports D0 D1 D2 D3  current D0
>        map[10]: type I/O Port, range 32, base 0x1000, size  8, enabled
>        map[14]: type Memory, range 32, base 0xe0000000, size  8, enabled
>found-> vendor=0x1106, dev=0x3053, revid=0x96
>        domain=0, bus=0, slot=10, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0097, statreg=0x0210, cachelnsz=8 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
>        intpin=a, irq=11
>        powerspec 2  supports D0 D1 D2 D3  current D0
>        map[10]: type I/O Port, range 32, base 0x1400, size  8, enabled
>        map[14]: type Memory, range 32, base 0xe0040000, size  8, enabled
>found-> vendor=0x1106, dev=0x3053, revid=0x96
>        domain=0, bus=0, slot=11, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0097, statreg=0x0210, cachelnsz=8 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
>        intpin=a, irq=15
>        powerspec 2  supports D0 D1 D2 D3  current D0
>        map[10]: type I/O Port, range 32, base 0x1800, size  8, enabled
>        map[14]: type Memory, range 32, base 0xe0080000, size  8, enabled
>found-> vendor=0x1022, dev=0x2090, revid=0x03
>        domain=0, bus=0, slot=15, func=0
>        class=06-01-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0009, statreg=0x02a0, cachelnsz=8 (dwords)
>        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        map[10]: type I/O Port, range 32, base 0x6000, size  3, enabled
>        map[14]: type I/O Port, range 32, base 0x6100, size  8, enabled
>        map[18]: type I/O Port, range 32, base 0x6200, size  6, enabled
>        map[20]: type I/O Port, range 32, base 0x9d00, size  7, enabled
>        map[24]: type I/O Port, range 32, base 0x9c00, size  6, enabled
>found-> vendor=0x1022, dev=0x209a, revid=0x01
>        domain=0, bus=0, slot=15, func=2
>        class=01-01-80, hdrtype=0x00, mfdev=0
>        cmdreg=0x0005, statreg=0x02a0, cachelnsz=8 (dwords)
>        lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        map[20]: type I/O Port, range 32, base 0xff00, size  4, enabled
>found-> vendor=0x1022, dev=0x2094, revid=0x02
>        domain=0, bus=0, slot=15, func=4
>        class=0c-03-10, hdrtype=0x00, mfdev=0
>        cmdreg=0x0006, statreg=0x0230, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=d, irq=12
>        powerspec 2  supports D0 D3  current D0
>        map[10]: type Memory, range 32, base 0xefffe000, size 12, enabled
>found-> vendor=0x1022, dev=0x2095, revid=0x02
>        domain=0, bus=0, slot=15, func=5
>        class=0c-03-20, hdrtype=0x00, mfdev=0
>        cmdreg=0x0006, statreg=0x0230, cachelnsz=8 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=d, irq=12
>        powerspec 2  supports D0 D3  current D0
>        map[10]: type Memory, range 32, base 0xefffd000, size 12, enabled
>Geode LX: PC Engines ALIX.2 v0.99m tinyBIOS V1.4a (C)1997-2007
>MFGPT bar: f00100006200
>pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver attached)
>vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0
>vr0: Quirks: 0x2
>vr0: Revision: 0x96
>miibus0: <MII bus> on vr0
>ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>ukphy0: OUI 0x0002c6, model 0x0034, rev. 3
>ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>vr0: bpf attached
>vr0: Ethernet address: 00:0d:b9:36:c3:1c
>vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1400-0x14ff mem 0xe0040000-0xe00400ff irq 11 at device 10.0 on pci0
>vr1: Quirks: 0x2
>vr1: Revision: 0x96
>miibus1: <MII bus> on vr1
>ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
>ukphy1: OUI 0x0002c6, model 0x0034, rev. 3
>ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>vr1: bpf attached
>vr1: Ethernet address: 00:0d:b9:36:c3:1d
>vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1800-0x18ff mem 0xe0080000-0xe00800ff irq 15 at device 11.0 on pci0
>vr2: Quirks: 0x2
>vr2: Revision: 0x96
>miibus2: <MII bus> on vr2
>ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus2
>ukphy2: OUI 0x0002c6, model 0x0034, rev. 3
>ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>vr2: bpf attached
>vr2: Ethernet address: 00:0d:b9:36:c3:1e
>isab0: <PCI-ISA bridge> port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0
>ata0: <ATA channel> at channel 0 on atapci0
>ata1: <ATA channel> at channel 1 on atapci0
>ohci0: <OHCI (generic) USB controller> mem 0xefffe000-0xefffefff irq 12 at device 15.4 on pci0
>usbus0 on ohci0
>ohci0: usbpf: Attached
>ehci0: <AMD CS5536 (Geode) USB 2.0 controller> mem 0xefffd000-0xefffdfff irq 12 at device 15.5 on pci0
>usbus1: EHCI version 1.0
>usbus1 on ehci0
>ehci0: usbpf: Attached
>cpu0
>pnp_identify: Trying Read_Port at 203
>pnp_identify: Trying Read_Port at 243
>pnp_identify: Trying Read_Port at 283
>pnp_identify: Trying Read_Port at 2c3
>pnp_identify: Trying Read_Port at 303
>pnp_identify: Trying Read_Port at 343
>pnp_identify: Trying Read_Port at 383
>pnp_identify: Trying Read_Port at 3c3
>PNP Identify complete
>isa_probe_children: disabling PnP devices
>ata: ata0 already exists; skipping it
>ata: ata1 already exists; skipping it
>sc: sc0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>orm0: <ISA Option ROM> at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0
>sc0 failed to probe on isa0
>vga0 failed to probe on isa0
>atkbdc0 failed to probe at port 0x60 on isa0
>atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>attimer0: <AT timer> at port 0x40 on isa0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
>ppc0 failed to probe at irq 7 on isa0
>uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
>uart0: console (115200,n,8,1)
>uart0: fast interrupt
>uart0: PPS capture mode: DCD
>uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
>uart1: fast interrupt
>uart1: PPS capture mode: DCD
>isa_probe_children: probing PnP devices
>Device configuration finished.
>Timecounter "TSC" frequency 43806653347 Hz quality 800
>Timecounters tick every 1.000 msec
>vlan: initialized, using hash tables with chaining
>lo0: bpf attached
>crypto: <crypto device>
>IPsec: Initialized Security Association Processing.
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 2048
>pflog0: bpf attached
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 480Mbps High Speed USB v2.0
>ata0: reset tp1 mask=03 ostat0=50 ostat1=00
>ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
>ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
>ata0: reset tp2 stat0=50 stat1=00 devices=0x1
>ugen0.1: <AMD OHCI root HUB> at usbus0
>uhub0 on usbus0
>uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <AMD EHCI root HUB> at usbus1
>uhub1 on usbus1
>uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>Trying to mount root from ufs:/dev/ada0s1a [ro]...
>Root mount waiting for: CAM usbus0 usbus1
>ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
>ada0 at ata0 bus 0 scbus0 target 0 lun 0
>ada0: <CF 4GB 20110221> ATA-7 device
>ada0: Serial Number TSS50036110615072830
>ada0: 100.000MB/s transfers (UDMA5, PIO 512bytes)
>ada0: 3831MB (7847280 512 byte sectors)
>pass0 at ata0 bus 0 scbus0 target 0 lun 0
>pass0: <CF 4GB 20110221> ATA-7 device
>pass0: Serial Number TSS50036110615072830
>pass0: 100.000MB/s transfers (UDMA5, PIO 512bytes)
>GEOM: new disk ada0
>uhub0: 4 ports with 4 removable, self powered
>Root mount waiting for: usbus1
>uhub1: 4 ports with 4 removable, self powered
>Root mount waiting for: usbus1
>ugen1.2: <Sierra Wireless, Incorporated MC7700> at usbus1
>u3g0 on uhub1
>u3g0: <Sierra Wireless, Incorporated MC7700, class 0/0, rev 2.00/0.06, addr 2> on usbus1
>u3g0: port 3 supports modem control
>u3g0: port 4 supports modem control
>u3g0: port 5 supports modem control
>u3g0: Found 6 ports.
>mountroot: waiting for device /dev/ada0s1a...
>atrtc0: providing initial system time
>start_init: trying /sbin/init
>Starting file system checks:
>/dev/ada0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
>/dev/ada0s1a: clean, 362309 free (1501 frags, 45101 blocks, 0.1% fragmentation)
>/dev/ada0s3: FILE SYSTEM CLEAN; SKIPPING CHECKS
>/dev/ada0s3: clean, 2829 free (21 frags, 351 blocks, 0.7% fragmentation)
>/etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one
>Setting hostuuid: c3176220-6c05-11ec-8b49-000db936c31c.
>Setting hostid: 0x4814cc58.
>Mounting local filesystems:.
>Setting hostname: 7eleven29130.sentex.ca.
>Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
>Feeding entropy: dd: /boot/entropy: Read-only file system
>.
>ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
>/etc/rc: WARNING: $swapfile is obsolete.  Ignored.
>lo0: link state changed to UP
>vr0: link state changed to DOWN
>vr1: link state changed to DOWN
>vr2: link state changed to DOWN
>vr0: link state changed to UP
>Starting Network: lo0 vr0 vr1 vr2.
>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
>        inet6 ::1 prefixlen 128
>        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
>        inet 127.0.0.1 netmask 0xff000000
>        groups: lo
>        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>        options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
>        ether 00:0d:b9:36:c3:1c
>        media: Ethernet autoselect (100baseTX <full-duplex>)
>        status: active
>        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>vr1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>        options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
>        ether 00:0d:b9:36:c3:1d
>        inet 192.168.241.129 netmask 0xffffff00 broadcast 192.168.241.255
>        media: Ethernet autoselect (none)
>        status: no carrier
>        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>vr2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>        options=8280b<RXCSUM,TXCSUM,VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
>        ether 00:0d:b9:36:c3:1e
>        inet 192.168.1.51 netmask 0xffffff00 broadcast 192.168.1.255
>        media: Ethernet autoselect (none)
>        status: no carrier
>        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>Starting devd.
>Starting dhclient.

Actions: View

Attachments on bug 260868: 230609 | 230612 | 230628 | 230635