Attachment 233402 Details for Bug 261912 – Full reboot with USB3 disk array connected

Full reboot with USB3 disk array connected

dmesg_failed_attach.boot (text/plain), 78.86 KB, created by Sean Bruno on 2022-04-22 21:00:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sean Bruno

Created: 2022-04-22 21:00:26 UTC

Size: 78.86 KB

patch

obsolete

>---<<BOOT>>---
>APIC: Using the MADT enumerator.
>Copyright (c) 1992-2022 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 14.0-CURRENT #1 main-n253814-4f75af31a86: Thu Mar 17 00:12:23 MDT 2022
>    sbruno@alice:/usr/obj/usr/src/amd64.amd64/sys/GENERIC-NODEBUG amd64
>FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
>PPIM 0: PA=0x40000000, VA=0xffffffff82b10000, size=0x7e9000, mode=0x1
>pmap: large map 8 PML4 slots (4096 GB)
>VT(efifb): resolution 1920x1080
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8283f000.
>Preloaded hostuuid "/etc/hostid" at 0xffffffff828487b8.
>Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff82848808.
>Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff82848ff0.
>Preloaded TSLOG data "TSLOG" at 0xffffffff82849048.
>CPU: Intel(R) Core(TM) i7-6770HQ CPU @ 2.60GHz (2600.00-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0x506e3  Family=0x6  Model=0x5e  Stepping=3
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>  AMD Features2=0x121<LAHF,ABM,Prefetch>
>  Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
>  Structured Extended Features3=0x9c002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD>
>  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>  VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
>        Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
>        Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
>        Secondary Processor Controls=0x1fbcff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,EPT#VE,XSAVES>
>        Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
>        Entry Controls=0xda0400
>        EPT Features=0x6334141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
>        VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
>  TSC: P-state invariant, performance statistics
>Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries
>Data TLB: 4 KB pages, 4-way set associative, 64 entries
>Instruction TLB: 2M/4M pages, fully associative, 8 entries
>Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
>64-Byte prefetching
>Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries
>L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
>real memory  = 17179869184 (16384 MB)
>Physical memory chunk(s):
>0x0000000000010000 - 0x0000000000057fff, 294912 bytes (72 pages)
>0x0000000000059000 - 0x000000000009efff, 286720 bytes (70 pages)
>0x0000000000100000 - 0x000000001b1fffff, 454033408 bytes (110848 pages)
>0x000000001db00000 - 0x00000000270f6fff, 157249536 bytes (38391 pages)
>0x0000000027142000 - 0x000000002e1bafff, 117936128 bytes (28793 pages)
>0x000000002f2fe000 - 0x000000002f2fefff, 4096 bytes (1 pages)
>0x0000000100001000 - 0x000000049fe83fff, 15567695872 bytes (3800707 pages)
>0x00000004bee00000 - 0x00000004bef69fff, 1482752 bytes (362 pages)
>avail memory = 16245313536 (15492 MB)
>intel stolen mem: base 0x30000000 size 256 MB
>MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
>SMP: Added CPU 2 (AP)
>MADT: Found CPU APIC ID 4 ACPI ID 3: enabled
>SMP: Added CPU 4 (AP)
>MADT: Found CPU APIC ID 6 ACPI ID 4: enabled
>SMP: Added CPU 6 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 5: enabled
>SMP: Added CPU 1 (AP)
>MADT: Found CPU APIC ID 3 ACPI ID 6: enabled
>SMP: Added CPU 3 (AP)
>MADT: Found CPU APIC ID 5 ACPI ID 7: enabled
>SMP: Added CPU 5 (AP)
>MADT: Found CPU APIC ID 7 ACPI ID 8: enabled
>SMP: Added CPU 7 (AP)
>Event timer "LAPIC" quality 600
>ACPI APIC Table: <INTEL NUC6i7KY>
>Package ID shift: 4
>L3 cache ID shift: 4
>L2 cache ID shift: 1
>L1 cache ID shift: 1
>Core ID shift: 1
>AP boot address 0x59000
>INTR: Adding local APIC 2 as a target
>INTR: Adding local APIC 4 as a target
>INTR: Adding local APIC 6 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
>Package HW ID = 0
>	Core HW ID = 0
>		CPU0 (BSP): APIC ID: 0
>		CPU1 (AP/HT): APIC ID: 1
>	Core HW ID = 1
>		CPU2 (AP): APIC ID: 2
>		CPU3 (AP/HT): APIC ID: 3
>	Core HW ID = 2
>		CPU4 (AP): APIC ID: 4
>		CPU5 (AP/HT): APIC ID: 5
>	Core HW ID = 3
>		CPU6 (AP): APIC ID: 6
>		CPU7 (AP/HT): APIC ID: 7
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 5
>APIC: CPU 2 has ACPI ID 2
>APIC: CPU 3 has ACPI ID 6
>APIC: CPU 4 has ACPI ID 3
>APIC: CPU 5 has ACPI ID 7
>APIC: CPU 6 has ACPI ID 4
>APIC: CPU 7 has ACPI ID 8
>Pentium Pro MTRR support enabled
>x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
>x86bios: SSEG 0x059000-0x059fff at 0xfffffe0021d32000
>x86bios: EBDA 0x09c000-0x09ffff at 0xfffff8000009c000
>x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
>random: registering fast source Intel Secure Key RNG
>random: fast provider: "Intel Secure Key RNG"
>random: read 4096 bytes from preloaded cache
>random: no platform bootloader entropy
>random: unblocking device.
>VIMAGE (virtualized network stack) enabled
>hostuuid: using 2c16c5fe-e175-4898-98c2-edbe79552970
>ULE: setup cpu 0
>ULE: setup cpu 1
>ULE: setup cpu 2
>ULE: setup cpu 3
>ULE: setup cpu 4
>ULE: setup cpu 5
>ULE: setup cpu 6
>ULE: setup cpu 7
>ACPI: RSDP 0x000000002E512000 000024 (v02 INTEL )
>ACPI: XSDT 0x000000002E5120A8 0000CC (v01 INTEL  NUC6i7KY 01072009 AMI  00010013)
>ACPI: FACP 0x000000002E5360F8 00010C (v05 INTEL  NUC6i7KY 01072009 AMI  00010013)
>ACPI: DSDT 0x000000002E512200 023EF6 (v02 INTEL  NUC6i7KY 01072009 INTL 20120913)
>ACPI: FACS 0x000000002EE3AF80 000040
>ACPI: APIC 0x000000002E536208 0000BC (v03 INTEL  NUC6i7KY 01072009 AMI  00010013)
>ACPI: FPDT 0x000000002E5362C8 000044 (v01 INTEL  NUC6i7KY 01072009 AMI  00010013)
>ACPI: FIDT 0x000000002E536310 00009C (v01 INTEL  NUC6i7KY 01072009 AMI  00010013)
>ACPI: MCFG 0x000000002E5363B0 00003C (v01 INTEL  NUC6i7KY 01072009 MSFT 00000097)
>ACPI: HPET 0x000000002E5363F0 000038 (v01 INTEL  NUC6i7KY 01072009 AMI. 0005000B)
>ACPI: LPIT 0x000000002E536428 000094 (v01 INTEL  NUC6i7KY 00000000 MSFT 0000005F)
>ACPI: SSDT 0x000000002E5364C0 000248 (v02 INTEL  NUC6i7KY 00000000 INTL 20120913)
>ACPI: SSDT 0x000000002E536708 002BAE (v02 INTEL  NUC6i7KY 00001000 INTL 20120913)
>ACPI: SSDT 0x000000002E5392B8 000BE3 (v02 INTEL  NUC6i7KY 00001000 INTL 20120913)
>ACPI: SSDT 0x000000002E539EA0 0004A3 (v02 INTEL  NUC6i7KY 00001000 INTL 20120913)
>ACPI: DBGP 0x000000002E53A348 000034 (v01 INTEL  NUC6i7KY 00000000 MSFT 0000005F)
>ACPI: DBG2 0x000000002E53A380 000054 (v00 INTEL  NUC6i7KY 00000000 MSFT 0000005F)
>ACPI: SSDT 0x000000002E53A3D8 000631 (v02 INTEL  NUC6i7KY 00000000 INTL 20120913)
>ACPI: WDAT 0x000000002E53AA10 0001AC (v01 INTEL  NUC6i7KY 01072009 MSFT 00010013)
>ACPI: SSDT 0x000000002E53ABC0 005480 (v02 INTEL  NUC6i7KY 00003000 INTL 20120913)
>ACPI: UEFI 0x000000002E540040 000042 (v01 INTEL  NUC6i7KY 00000000      00000000)
>ACPI: SSDT 0x000000002E540088 000E73 (v02 INTEL  NUC6i7KY 00003000 INTL 20120913)
>ACPI: SSDT 0x000000002E540F00 000735 (v02 INTEL  NUC6i7KY 00001000 INTL 20120913)
>ACPI: BGRT 0x000000002E541638 000038 (v01 INTEL  NUC6i7KY 01072009 AMI  00010013)
>ACPI: DMAR 0x000000002E541670 0000A8 (v01 INTEL  NUC6i7KY 00000001 INTL 00000001)
>MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
>ioapic0: ver 0x20 maxredir 0x77
>ioapic0: Routing external 8259A's -> intpin 0
>lapic0: Routing NMI -> LINT1
>lapic0: LINT1 trigger: edge
>lapic0: LINT1 polarity: high
>lapic2: Routing NMI -> LINT1
>lapic2: LINT1 trigger: edge
>lapic2: LINT1 polarity: high
>lapic4: Routing NMI -> LINT1
>lapic4: LINT1 trigger: edge
>lapic4: LINT1 polarity: high
>lapic6: Routing NMI -> LINT1
>lapic6: LINT1 trigger: edge
>lapic6: LINT1 polarity: high
>lapic1: Routing NMI -> LINT1
>lapic1: LINT1 trigger: edge
>lapic1: LINT1 polarity: high
>lapic3: Routing NMI -> LINT1
>lapic3: LINT1 trigger: edge
>lapic3: LINT1 polarity: high
>lapic5: Routing NMI -> LINT1
>lapic5: LINT1 trigger: edge
>lapic5: LINT1 polarity: high
>lapic7: Routing NMI -> LINT1
>lapic7: LINT1 trigger: edge
>lapic7: LINT1 polarity: high
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>ioapic0 <Version 2.0> irqs 0-119
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x01060015 LDR: 0x00000001 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000300ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x00000001   VER: 0x01060015 LDR: 0x00000002 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>SMP: AP CPU #2 Launched!
>cpu2 AP:
>     ID: 0x00000002   VER: 0x01060015 LDR: 0x00000004 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #6 Launched!
>cpu6 AP:
>     ID: 0x00000006   VER: 0x01060015 LDR: 0x00000040 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #4 Launched!
>cpu4 AP:
>     ID: 0x00000004   VER: 0x01060015 LDR: 0x00000010 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #3 Launched!
>cpu3 AP:
>     ID: 0x00000003   VER: 0x01060015 LDR: 0x00000008 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>SMP: AP CPU #7 Launched!
>cpu7 AP:
>     ID: 0x00000007   VER: 0x01060015 LDR: 0x00000080 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>SMP: AP CPU #5 Launched!
>cpu5 AP:
>     ID: 0x00000005   VER: 0x01060015 LDR: 0x00000020 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>SMP: passed TSC synchronization test
>TSC timecounter discards lower 1 bit(s)
>No TSX change made
>wlan: <802.11 Link Layer>
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>random: entropy device external interface
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>crypto: <crypto core>
>null: <full device, null device, zero device>
>[ath_hal] loaded
>io: <I/O>
>tcp_log: tcp_log device
>efirtc0: <EFI Realtime Clock>
>efirtc0: registered as a time-of-day clock, resolution 1.000000s
>smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe
>smbios0: Version: 3.0, BCD Revision: 3.0
>crypto: assign cryptosoft0 driver id 0, flags 0x6000000
>aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
>crypto: assign aesni0 driver id 1, flags 0xe000000
>acpi0: <INTEL>
>ACPI: 9 ACPI AML tables successfully acquired and loaded
>PCIe: Memory Mapped configuration base @ 0xe0000000
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>acpi0: Power Button (fixed)
>acpi0: wakeup code va 0xfffffe0021fff000 pa 0x9e000
>cpu0: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF80001F58800 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF8000203D000 0005DC (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
>cpu2: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF80002019000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800019D3780 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
>cpu4: <ACPI CPU> on acpi0
>cpu6: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>cpu3: <ACPI CPU> on acpi0
>cpu5: <ACPI CPU> on acpi0
>cpu7: <ACPI CPU> on acpi0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>hpet0: vendor 0x8086, rev 0x1, 24000000Hz 64bit, 8 timers, legacy route
>hpet0:  t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
>hpet0:  t1: irqs 0x00f00000 (0), MSI
>hpet0:  t2: irqs 0x00f00800 (0), MSI
>hpet0:  t3: irqs 0x00f01000 (0), MSI
>hpet0:  t4: irqs 0x00000000 (0), MSI
>hpet0:  t5: irqs 0x00000000 (0), MSI
>hpet0:  t6: irqs 0x00000000 (0), MSI
>hpet0:  t7: irqs 0x00000000 (0), MSI
>Timecounter "HPET" frequency 24000000 Hz quality 950
>msi: routing MSI-X IRQ 120 to local APIC 2 vector 48
>msi: routing MSI-X IRQ 121 to local APIC 4 vector 48
>msi: routing MSI-X IRQ 122 to local APIC 6 vector 48
>msi: routing MSI-X IRQ 123 to local APIC 0 vector 49
>msi: routing MSI-X IRQ 124 to local APIC 2 vector 49
>msi: routing MSI-X IRQ 125 to local APIC 4 vector 49
>msi: routing MSI-X IRQ 126 to local APIC 6 vector 49
>msi: routing MSI-X IRQ 127 to local APIC 0 vector 50
>msi: Assigning MSI-X IRQ 120 to local APIC 0 vector 51
>msi: Assigning MSI-X IRQ 121 to local APIC 1 vector 48
>msi: Assigning MSI-X IRQ 122 to local APIC 2 vector 48
>msi: Assigning MSI-X IRQ 123 to local APIC 3 vector 48
>msi: Assigning MSI-X IRQ 124 to local APIC 4 vector 48
>msi: Assigning MSI-X IRQ 125 to local APIC 5 vector 48
>msi: Assigning MSI-X IRQ 127 to local APIC 7 vector 48
>Event timer "HPET" frequency 24000000 Hz quality 550
>atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
>atrtc0: Warning: Couldn't map I/O.
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 49
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
>Event timer "RTC" frequency 32768 Hz quality 0
>attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 4 vector 49
>Event timer "i8254" frequency 1193182 Hz quality 100
>ACPI timer: -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 5 range 0-0xfe
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0x40000000-0xdfffffff
>pcib0: decoding 3 range 0xfd000000-0xfe7fffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x8086, dev=0x1910, revid=0x0a
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x193b, revid=0x09
>	domain=0, bus=0, slot=2, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xdb000000, size 24, enabled
>pcib0: allocated type 3 (0xdb000000-0xdbffffff) for rid 10 of pci0:0:2:0
>	map[18]: type Prefetchable Memory, range 64, base 0x40000000, size 30, enabled
>pcib0: allocated type 3 (0x40000000-0x7fffffff) for rid 18 of pci0:0:2:0
>	map[20]: type I/O Port, range 32, base 0xf000, size  6, enabled
>pcib0: allocated type 4 (0xf000-0xf03f) for rid 20 of pci0:0:2:0
>pcib0: matched entry for 0.2.INTA
>pcib0: slot 2 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xdc34f000, size 12, memory disabled
>pcib0: allocated type 3 (0xdc34f000-0xdc34ffff) for rid 10 of pci0:0:8:0
>pcib0: matched entry for 0.8.INTA
>pcib0: slot 8 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0xa12f, revid=0x31
>	domain=0, bus=0, slot=20, func=0
>	class=0c-03-30, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 8 messages, 64 bit
>	map[10]: type Memory, range 64, base 0xdc330000, size 16, enabled
>pcib0: allocated type 3 (0xdc330000-0xdc33ffff) for rid 10 of pci0:0:20:0
>pcib0: matched entry for 0.20.INTA
>pcib0: slot 20 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0xa131, revid=0x31
>	domain=0, bus=0, slot=20, func=2
>	class=11-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xdc34e000, size 12, enabled
>pcib0: allocated type 3 (0xdc34e000-0xdc34efff) for rid 10 of pci0:0:20:2
>pcib0: matched entry for 0.20.INTC
>pcib0: slot 20 INTC hardwired to IRQ 18
>found->	vendor=0x8086, dev=0xa13a, revid=0x31
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xdc34d000, size 12, memory disabled
>pcib0: allocated type 3 (0xdc34d000-0xdc34dfff) for rid 10 of pci0:0:22:0
>pcib0: matched entry for 0.22.INTA
>pcib0: slot 22 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0xa103, revid=0x31
>	domain=0, bus=0, slot=23, func=0
>	class=01-06-01, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 32, base 0xdc348000, size 13, enabled
>pcib0: allocated type 3 (0xdc348000-0xdc349fff) for rid 10 of pci0:0:23:0
>	map[14]: type Memory, range 32, base 0xdc34c000, size  8, enabled
>pcib0: allocated type 3 (0xdc34c000-0xdc34c0ff) for rid 14 of pci0:0:23:0
>	map[18]: type I/O Port, range 32, base 0xf090, size  3, enabled
>pcib0: allocated type 4 (0xf090-0xf097) for rid 18 of pci0:0:23:0
>	map[1c]: type I/O Port, range 32, base 0xf080, size  2, enabled
>pcib0: allocated type 4 (0xf080-0xf083) for rid 1c of pci0:0:23:0
>	map[20]: type I/O Port, range 32, base 0xf060, size  5, enabled
>pcib0: allocated type 4 (0xf060-0xf07f) for rid 20 of pci0:0:23:0
>	map[24]: type Memory, range 32, base 0xdc34b000, size 11, enabled
>pcib0: allocated type 3 (0xdc34b000-0xdc34b7ff) for rid 24 of pci0:0:23:0
>pcib0: matched entry for 0.23.INTA
>pcib0: slot 23 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0xa110, revid=0xf1
>	domain=0, bus=0, slot=28, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0003, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTA
>pcib0: slot 28 INTA hardwired to IRQ 16
>	secbus=1, subbus=1
>found->	vendor=0x8086, dev=0xa111, revid=0xf1
>	domain=0, bus=0, slot=28, func=1
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=10
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTB
>pcib0: slot 28 INTB hardwired to IRQ 17
>	secbus=2, subbus=2
>found->	vendor=0x8086, dev=0xa112, revid=0xf1
>	domain=0, bus=0, slot=28, func=2
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0003, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTC
>pcib0: slot 28 INTC hardwired to IRQ 18
>	secbus=3, subbus=3
>found->	vendor=0x8086, dev=0xa114, revid=0xf1
>	domain=0, bus=0, slot=28, func=4
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0003, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTA
>pcib0: slot 28 INTA hardwired to IRQ 16
>	secbus=4, subbus=60
>found->	vendor=0x8086, dev=0xa118, revid=0xf1
>	domain=0, bus=0, slot=29, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0003, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.29.INTA
>pcib0: slot 29 INTA hardwired to IRQ 16
>	secbus=61, subbus=61
>found->	vendor=0x8086, dev=0xa11c, revid=0xf1
>	domain=0, bus=0, slot=29, func=4
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.29.INTA
>pcib0: slot 29 INTA hardwired to IRQ 16
>	secbus=62, subbus=62
>found->	vendor=0x8086, dev=0xa14e, revid=0x31
>	domain=0, bus=0, slot=31, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0xa121, revid=0x31
>	domain=0, bus=0, slot=31, func=2
>	class=05-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	map[10]: type Memory, range 32, base 0xdc344000, size 14, enabled
>pcib0: allocated type 3 (0xdc344000-0xdc347fff) for rid 10 of pci0:0:31:2
>found->	vendor=0x8086, dev=0xa170, revid=0x31
>	domain=0, bus=0, slot=31, func=3
>	class=04-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xdc340000, size 14, enabled
>pcib0: allocated type 3 (0xdc340000-0xdc343fff) for rid 10 of pci0:0:31:3
>	map[20]: type Memory, range 64, base 0xdc320000, size 16, enabled
>pcib0: allocated type 3 (0xdc320000-0xdc32ffff) for rid 20 of pci0:0:31:3
>pcib0: matched entry for 0.31.INTA
>pcib0: slot 31 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0xa123, revid=0x31
>	domain=0, bus=0, slot=31, func=4
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	map[10]: type Memory, range 64, base 0xdc34a000, size  8, enabled
>pcib0: allocated type 3 (0xdc34a000-0xdc34a0ff) for rid 10 of pci0:0:31:4
>	map[20]: type I/O Port, range 32, base 0xf040, size  5, enabled
>pcib0: allocated type 4 (0xf040-0xf05f) for rid 20 of pci0:0:31:4
>pcib0: matched entry for 0.31.INTA
>pcib0: slot 31 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x15b7, revid=0x31
>	domain=0, bus=0, slot=31, func=6
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 32, base 0xdc300000, size 17, enabled
>pcib0: allocated type 3 (0xdc300000-0xdc31ffff) for rid 10 of pci0:0:31:6
>pcib0: matched entry for 0.31.INTA
>pcib0: slot 31 INTA hardwired to IRQ 16
>vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xdb000000-0xdbffffff,0x40000000-0x7fffffff irq 16 at device 2.0 on pci0
>vgapci0: Boot video device
>pci0: <base peripheral> at device 8.0 (no driver attached)
>xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdc330000-0xdc33ffff irq 16 at device 20.0 on pci0
>xhci0: 32 bytes context size, 64-bit DMA
>xhci0: attempting to allocate 1 MSI vectors (8 supported)
>msi: routing MSI IRQ 128 to local APIC 6 vector 48
>xhci0: using IRQ 128 for MSI
>xhci0: MSI enabled
>usbus0 on xhci0
>xhci0: usbpf: Attached
>usbus0: 5.0Gbps Super Speed USB v3.0
>pci0: <dasp> at device 20.2 (no driver attached)
>pci0: <simple comms> at device 22.0 (no driver attached)
>ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdc348000-0xdc349fff,0xdc34c000-0xdc34c0ff,0xdc34b000-0xdc34b7ff irq 16 at device 23.0 on pci0
>ahci0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 129 to local APIC 0 vector 50
>ahci0: using IRQ 129 for MSI
>ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported
>ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM 1ports
>ahci0: Caps2: DESO SADM SDS APST
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich0: Caps:
>ahciem0: <AHCI enclosure management bridge> on ahci0
>ahciem0: Caps: ALHD XMT SMB LED
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>pcib1: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 130 to local APIC 2 vector 49
>pcib1: using IRQ 130 for MSI
>pcib1: HotPlug command: 0000 -> 1028
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
>pcib0: allocated type 3 (0xdc200000-0xdc2fffff) for rid 20 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   memory decode     0xdc200000-0xdc2fffff
>pci1: <ACPI PCI bus> on pcib2
>pcib2: allocated bus range (2-2) for rid 0 of pci1
>pci1: domain=0, physical bus=2
>found->	vendor=0x1217, dev=0x8621, revid=0x01
>	domain=0, bus=2, slot=0, func=0
>	class=08-05-01, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit, vector masks
>	map[10]: type Memory, range 32, base 0xdc201000, size 12, enabled
>pcib2: allocated memory range (0xdc201000-0xdc201fff) for rid 10 of pci0:2:0:0
>	map[14]: type Memory, range 32, base 0xdc200000, size 11, enabled
>pcib2: allocated memory range (0xdc200000-0xdc2007ff) for rid 14 of pci0:2:0:0
>pcib2: matched entry for 2.0.INTA
>pcib2: slot 0 INTA hardwired to IRQ 17
>sdhci_pci0: <Generic SD HCI> mem 0xdc201000-0xdc201fff,0xdc200000-0xdc2007ff irq 17 at device 0.0 on pci1
>sdhci_pci0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 131 to local APIC 4 vector 50
>sdhci_pci0: using IRQ 131 for MSI
>sdhci_pci0-slot0: 50MHz 4bits VDD: VCCQ: 3.3V 1.8V DRV: BACD DMA removable
>sdhci_pci0-slot0: eMMC: HS200
>sdhci_pci0-slot0: UHS-I: SDR12 SDR25 SDR50 SDR104 DDR50
>sdhci_pci0-slot0: Re-tuning count 0 secs, mode 1
>sdhci_pci0-slot0: ============== REGISTER DUMP ==============
>sdhci_pci0-slot0: Sys addr: 0x00000000 | Version:  0x00000603
>sdhci_pci0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_pci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_pci0-slot0: Present:  0x01f80000 | Host ctl: 0x00000000
>sdhci_pci0-slot0: Power:    0x00000000 | Blk gap:  0x00000000
>sdhci_pci0-slot0: Wake-up:  0x00000000 | Clock:    0x00000002
>sdhci_pci0-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_pci0-slot0: Int enab: 0x00000000 | Sig enab: 0x00000000
>sdhci_pci0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_pci0-slot0: Caps:     0x25f832bf | Caps2:    0x00002077
>sdhci_pci0-slot0: Max curr: 0x005800c8 | ADMA err: 0x00000000
>sdhci_pci0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_pci0-slot0: ===========================================
>sdhci_pci0: 1 slot(s) allocated
>pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
>pcib0: allocated type 3 (0xdc100000-0xdc1fffff) for rid 20 of pcib3
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   memory decode     0xdc100000-0xdc1fffff
>pci2: <ACPI PCI bus> on pcib3
>pcib3: allocated bus range (3-3) for rid 0 of pci2
>pci2: domain=0, physical bus=3
>found->	vendor=0x8086, dev=0x24f3, revid=0x3a
>	domain=0, bus=3, slot=0, func=0
>	class=02-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xdc100000, size 13, memory disabled
>pcib3: allocated memory range (0xdc100000-0xdc101fff) for rid 10 of pci0:3:0:0
>pcib3: matched entry for 3.0.INTA
>pcib3: slot 0 INTA hardwired to IRQ 18
>pci2: <network> at device 0.0 (no driver attached)
>pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
>pcib0: allocated type 3 (0xc4000000-0xda0fffff) for rid 20 of pcib4
>pcib0: allocated type 3 (0x80000000-0xa1ffffff) for rid 24 of pcib4
>pcib4: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 132 to local APIC 6 vector 50
>pcib4: using IRQ 132 for MSI
>pcib4: HotPlug command: 0008 -> 1028
>pcib4:   domain            0
>pcib4:   secondary bus     4
>pcib4:   subordinate bus   60
>pcib4:   memory decode     0xc4000000-0xda0fffff
>pcib4:   prefetched decode 0x80000000-0xa1ffffff
>pci3: <ACPI PCI bus> on pcib4
>pcib4: allocated bus range (4-4) for rid 0 of pci3
>pci3: domain=0, physical bus=4
>found->	vendor=0x8086, dev=0x1576, revid=0x00
>	domain=0, bus=4, slot=0, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	secbus=0, subbus=0
>pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci3
>pcib4: allocated bus range (5-5) for rid 0 of pcib5
>pcib5: Lazy allocation of 1 bus at 5
>pcib4: failed to allocate initial I/O port window (0-0xfff,0x1000)
>pcib5: failed to allocate initial I/O port window: 0-0xfff
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial memory window: 0-0xfffff
>pcib4: attempting to grow prefetch window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial prefetch window: 0-0xfffff
>pcib5:   domain            0
>pcib5:   secondary bus     5
>pcib5:   subordinate bus   5
>pcib5: could not get PCI interrupt routing table for \134_SB_.PCI0.RP05.TBTR - AE_NOT_FOUND
>pci4: <ACPI PCI bus> on pcib5
>pcib5: allocated bus range (5-5) for rid 0 of pci4
>pci4: domain=0, physical bus=5
>found->	vendor=0x8086, dev=0x1576, revid=0x00
>	domain=0, bus=5, slot=0, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	secbus=0, subbus=0
>found->	vendor=0x8086, dev=0x1576, revid=0x00
>	domain=0, bus=5, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	secbus=0, subbus=0
>found->	vendor=0x8086, dev=0x1576, revid=0x00
>	domain=0, bus=5, slot=2, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	secbus=0, subbus=0
>pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci4
>pcib5: attempting to grow bus range for 1 buses
>	back candidate range: 6-6
>pcib5: grew bus range to 5-6
>pcib5: allocated bus range (6-6) for rid 0 of pcib6
>pcib6: Lazy allocation of 1 bus at 6
>pcib4: failed to allocate initial I/O port window (0-0xfff,0x1000)
>pcib5: failed to allocate initial I/O port window (0-0xfff,0x1000)
>pcib6: failed to allocate initial I/O port window: 0-0xfff
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial memory window (0-0xfffff,0x100000)
>pcib6: failed to allocate initial memory window: 0-0xfffff
>pcib4: attempting to grow prefetch window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial prefetch window (0-0xfffff,0x100000)
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial memory window (0-0xfffff,0x100000)
>pcib6: failed to allocate initial prefetch window: 0-0xfffff
>pcib6:   domain            0
>pcib6:   secondary bus     6
>pcib6:   subordinate bus   6
>pcib6: could not get PCI interrupt routing table for \134_SB_.PCI0.RP05.TBTR.TBTA - AE_NOT_FOUND
>pci5: <ACPI PCI bus> on pcib6
>pcib6: allocated bus range (6-6) for rid 0 of pci5
>pci5: domain=0, physical bus=6
>pcib7: <ACPI PCI-PCI bridge> at device 1.0 on pci4
>pcib5: attempting to grow bus range for 1 buses
>	back candidate range: 7-7
>pcib5: grew bus range to 5-7
>pcib5: allocated bus range (7-7) for rid 0 of pcib7
>pcib7: Lazy allocation of 1 bus at 7
>pcib4: failed to allocate initial I/O port window (0-0xfff,0x1000)
>pcib5: failed to allocate initial I/O port window (0-0xfff,0x1000)
>pcib7: failed to allocate initial I/O port window: 0-0xfff
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial memory window (0-0xfffff,0x100000)
>pcib7: failed to allocate initial memory window: 0-0xfffff
>pcib4: attempting to grow prefetch window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial prefetch window (0-0xfffff,0x100000)
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial memory window (0-0xfffff,0x100000)
>pcib7: failed to allocate initial prefetch window: 0-0xfffff
>pcib7: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 133 to local APIC 0 vector 52
>pcib7: using IRQ 133 for MSI
>pcib7: HotPlug command: 0000 -> 1028
>pcib7:   domain            0
>pcib7:   secondary bus     7
>pcib7:   subordinate bus   7
>pcib7: could not get PCI interrupt routing table for \134_SB_.PCI0.RP05.TBTR.TBTB - AE_NOT_FOUND
>pcib8: <ACPI PCI-PCI bridge> at device 2.0 on pci4
>pcib5: attempting to grow bus range for 1 buses
>	back candidate range: 8-8
>pcib5: grew bus range to 5-8
>pcib5: allocated bus range (8-8) for rid 0 of pcib8
>pcib8: Lazy allocation of 1 bus at 8
>pcib4: failed to allocate initial I/O port window (0-0xfff,0x1000)
>pcib5: failed to allocate initial I/O port window (0-0xfff,0x1000)
>pcib8: failed to allocate initial I/O port window: 0-0xfff
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial memory window (0-0xfffff,0x100000)
>pcib8: failed to allocate initial memory window: 0-0xfffff
>pcib4: attempting to grow prefetch window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial prefetch window (0-0xfffff,0x100000)
>pcib4: attempting to grow memory window for (0-0xfffff,0x100000)
>	front candidate range: 0-0xfffff
>pcib5: failed to allocate initial memory window (0-0xfffff,0x100000)
>pcib8: failed to allocate initial prefetch window: 0-0xfffff
>pcib8: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 134 to local APIC 2 vector 50
>pcib8: using IRQ 134 for MSI
>pcib8: HotPlug command: 0000 -> 1028
>pcib8:   domain            0
>pcib8:   secondary bus     8
>pcib8:   subordinate bus   8
>pcib8: could not get PCI interrupt routing table for \134_SB_.PCI0.RP05.TBTR.TBTC - AE_NOT_FOUND
>pci6: <ACPI PCI bus> on pcib8
>pcib8: allocated bus range (8-8) for rid 0 of pci6
>pci6: domain=0, physical bus=8
>found->	vendor=0x8086, dev=0x15b5, revid=0x00
>	domain=0, bus=8, slot=0, func=0
>	class=0c-03-30, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 8 messages, 64 bit
>	map[10]: type Memory, range 32, base 0, size 16, memory disabled
>pcib4: allocated memory range (0xc4000000-0xc40fffff) for rid 20 of pcib5
>pcib5: allocated initial memory window of 0xc4000000-0xc40fffff
>pcib5: allocated memory range (0xc4000000-0xc40fffff) for rid 20 of pcib8
>pcib8: allocated initial memory window of 0xc4000000-0xc40fffff
>pcib8: allocated memory range (0xc4000000-0xc400ffff) for rid 10 of pci0:8:0:0
>unknown: Lazy allocation of 0x10000 bytes rid 0x10 type 3 at 0xc4000000
>xhci1: <XHCI (generic) USB 3.0 controller> mem 0xc4000000-0xc400ffff at device 0.0 on pci6
>xhci1: 32 bytes context size, 64-bit DMA
>xhci1: attempting to allocate 1 MSI vectors (8 supported)
>msi: routing MSI IRQ 135 to local APIC 4 vector 51
>xhci1: using IRQ 135 for MSI
>xhci1: MSI enabled
>usbus1 on xhci1
>xhci1: usbpf: Attached
>usbus1: 5.0Gbps Super Speed USB v3.0
>pcib9: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
>pcib9:   domain            0
>pcib9:   secondary bus     61
>pcib9:   subordinate bus   61
>pci7: <ACPI PCI bus> on pcib9
>pcib9: allocated bus range (61-61) for rid 0 of pci7
>pci7: domain=0, physical bus=61
>pcib10: <ACPI PCI-PCI bridge> irq 16 at device 29.4 on pci0
>pcib0: allocated type 3 (0xdc000000-0xdc0fffff) for rid 20 of pcib10
>pcib10:   domain            0
>pcib10:   secondary bus     62
>pcib10:   subordinate bus   62
>pcib10:   memory decode     0xdc000000-0xdc0fffff
>pci8: <ACPI PCI bus> on pcib10
>pcib10: allocated bus range (62-62) for rid 0 of pci8
>pci8: domain=0, physical bus=62
>found->	vendor=0x15b7, dev=0x5001, revid=0x00
>	domain=0, bus=62, slot=0, func=0
>	class=01-08-02, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D3  current D0
>	MSI-X supports 19 messages in map 0x10
>	map[10]: type Memory, range 64, base 0xdc000000, size 14, enabled
>pcib10: allocated memory range (0xdc000000-0xdc003fff) for rid 10 of pci0:62:0:0
>pcib10: matched entry for 62.0.INTA
>pcib10: slot 0 INTA hardwired to IRQ 16
>nvme0: <Generic NVMe Device> mem 0xdc000000-0xdc003fff irq 16 at device 0.0 on pci8
>nvme0: attempting to allocate 5 MSI-X vectors (19 supported)
>msi: routing MSI-X IRQ 136 to local APIC 6 vector 51
>msi: routing MSI-X IRQ 137 to local APIC 0 vector 53
>msi: routing MSI-X IRQ 138 to local APIC 2 vector 51
>msi: routing MSI-X IRQ 139 to local APIC 4 vector 52
>msi: routing MSI-X IRQ 140 to local APIC 6 vector 52
>nvme0: using IRQs 136-140 for MSI-X
>nvme0: CapLo: 0x2c0103ff: MQES 1023, CQR, TO 44
>nvme0: CapHi: 0x00000020: DSTRD 0, CSS 1, MPSMIN 0, MPSMAX 0
>nvme0: Version: 0x00010200: 1.2
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>pci0: <memory> at device 31.2 (no driver attached)
>hdac0: <Intel Sunrise Point HDA Controller> mem 0xdc340000-0xdc343fff,0xdc320000-0xdc32ffff irq 16 at device 31.3 on pci0
>hdac0: PCI card vendor: 0x8086, device: 0x2064
>hdac0: HDA Driver Revision: 20120126_0002
>hdac0: Config options: on=0x00000000 off=0x00000000
>hdac0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 141 to local APIC 0 vector 54
>hdac0: using IRQ 141 for MSI
>hdac0: Caps: OSS 9, ISS 7, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
>pci0: <serial bus, SMBus> at device 31.4 (no driver attached)
>em0: <Intel(R) I219-LM SPT-H(2)> mem 0xdc300000-0xdc31ffff irq 16 at device 31.6 on pci0
>em0: attach_pre capping queues at 1
>em0: EEPROM V0.8-4
>em0: Using 1024 TX descriptors and 1024 RX descriptors
>em0: msix_init qsets capped at 1
>em0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 142 to local APIC 2 vector 52
>em0: using IRQ 142 for MSI
>em0: Using an MSI interrupt
>em0: allocated for 1 tx_queues
>em0: allocated for 1 rx_queues
>msi: Assigning MSI IRQ 142 to local APIC 7 vector 49
>msi: Assigning MSI IRQ 142 to local APIC 6 vector 53
>em0: bpf attached
>em0: Ethernet address: 00:1f:c6:9c:4c:a4
>em0: netmap queues/slots: TX 1/1024, RX 1/1024
>acpi_button0: <Sleep Button> on acpi0
>acpi_button1: <Power Button> on acpi0
>acpi_tz0: <Thermal Zone> on acpi0
>acpi_tz1: <Thermal Zone> on acpi0
>ACPI: Enabled 5 GPEs in block 00 to 7F
>pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
>AcpiOsExecute: task queue not started
>pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>ahc_isa_identify 0: ioport 0xc00 alloc failed
>ahc_isa_identify 1: ioport 0x1c00 alloc failed
>ahc_isa_identify 2: ioport 0x2c00 alloc failed
>ahc_isa_identify 3: ioport 0x3c00 alloc failed
>ahc_isa_identify 4: ioport 0x4c00 alloc failed
>ahc_isa_identify 5: ioport 0x5c00 alloc failed
>ahc_isa_identify 6: ioport 0x6c00 alloc failed
>ahc_isa_identify 7: ioport 0x7c00 alloc failed
>ahc_isa_identify 8: ioport 0x8c00 alloc failed
>ahc_isa_identify 9: ioport 0x9c00 alloc failed
>ahc_isa_identify 10: ioport 0xac00 alloc failed
>ahc_isa_identify 11: ioport 0xbc00 alloc failed
>ahc_isa_identify 12: ioport 0xcc00 alloc failed
>ahc_isa_identify 13: ioport 0xdc00 alloc failed
>ahc_isa_identify 14: ioport 0xec00 alloc failed
>isa_probe_children: disabling PnP devices
>atrtc: atrtc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>sc: sc0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0
>sc0 failed to probe on isa0
>vga0 failed to probe on isa0
>pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
>pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
>atkbdc0: AT keyboard controller not found
>atkbdc0 failed to probe at port 0x60,0x64 on isa0
>pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
>pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: cannot reserve I/O port range
>ppc0 failed to probe at irq 7 on isa0
>pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0
>pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0
>uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
>pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0
>ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 4 vector 53
>uart0: fast interrupt
>uart0: PPS capture mode: DCD
>pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1
>uart1 failed to probe at port 0x2f8 irq 3 on isa0
>isa_probe_children: probing PnP devices
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>hwpstate_intel0: <Intel Speed Shift> on cpu0
>hwpstate_intel1: <Intel Speed Shift> on cpu1
>hwpstate_intel2: <Intel Speed Shift> on cpu2
>hwpstate_intel3: <Intel Speed Shift> on cpu3
>hwpstate_intel4: <Intel Speed Shift> on cpu4
>hwpstate_intel5: <Intel Speed Shift> on cpu5
>hwpstate_intel6: <Intel Speed Shift> on cpu6
>hwpstate_intel7: <Intel Speed Shift> on cpu7
>Device configuration finished.
>procfs registered
>Statistical TSC calibration took 18142 us and 4029 data points
>Timecounter "TSC-low" frequency 1295997394 Hz quality 1000
>Statistical lapic calibration took 8715 us and 35843 data points
>lapic: Divisor 2, Frequency 11999975 Hz
>lapic: deadline tsc mode, Frequency 2591994789 Hz
>Timecounters tick every 1.000 msec
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>vlan: initialized, using hash tables with chaining
>lo0: bpf attached
>IPsec: Initialized Security Association Processing.
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072
>AcpiOsExecute: enqueue 9 pending tasks
>ahcich0: AHCI reset...
>ugen1.1: <Intel XHCI root HUB> at usbus1
>ugen0.1: <Intel XHCI root HUB> at usbus0
>ahcich0: SATA connect time=0us status=00000133
>uhub0 on usbus0
>uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>uhub1ahcich0: AHCI reset: device found
>ahcich0: AHCI reset: device ready after 0ms
> on usbus1
>uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
>msi: Assigning MSI-X IRQ 137 to local APIC 1 vector 49
>msi: Assigning MSI-X IRQ 138 to local APIC 3 vector 49
>msi: Assigning MSI-X IRQ 139 to local APIC 5 vector 49
>msi: Assigning MSI-X IRQ 140 to local APIC 7 vector 49
>hdacc0: <Realtek ALC233 HDA CODEC> at cad 0 on hdac0
>hdaa0: <Realtek ALC233 Audio Function Group> at nid 1 on hdacc0
>hdaa0: Subsystem ID: 0x80862064
>hdaa0: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
>hdaa0:  GPIO0: disabled
>hdaa0:  GPIO1: disabled
>hdaa0:  GPIO2: disabled
>hdaa0: Original pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0: 18 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 20 40000000 0  0  Line-out      None  Unknown 0x00       Unknown 0
>hdaa0: 23 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 24 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 25 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 26 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 27 01111010 1  0  Speaker       Jack  1/8     Rear       Black   0
>hdaa0: 29 40818001 0  1  Line-in       None  1/8     0x00       Purple  0
>hdaa0: 30 01451130 3  0  SPDIF-out     Jack  Optical Rear       Black   1
>hdaa0: 33 02211020 2  0  Headphones    Jack  1/8     Front      Black   0
>hdaa0: Patching widget caps nid=29 0x00400400 -> 0x00700400
>hdaa0: Patched pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0: 18 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 20 40000000 0  0  Line-out      None  Unknown 0x00       Unknown 0 DISA
>hdaa0: 23 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 24 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 25 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 26 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 27 01111010 1  0  Speaker       Jack  1/8     Rear       Black   0
>hdaa0: 30 01451130 3  0  SPDIF-out     Jack  Optical Rear       Black   1
>hdaa0: 33 02211020 2  0  Headphones    Jack  1/8     Front      Black   0
>hdaa0: 3 associations found:
>hdaa0: Association 0 (1) out:
>hdaa0:  Pin nid=27 seq=0
>hdaa0: Association 1 (2) out:
>hdaa0:  Pin nid=33 seq=0
>hdaa0: Association 2 (3) out:
>hdaa0:  Pin nid=30 seq=0
>hdaa0: Tracing association 0 (1)
>hdaa0:  Pin 27 traced to DAC 2
>hdaa0: Association 0 (1) trace succeeded
>hdaa0: Tracing association 1 (2)
>hdaa0:  Pin 33 traced to DAC 3
>hdaa0: Association 1 (2) trace succeeded
>hdaa0: Tracing association 2 (3)
>hdaa0:  Pin 30 traced to DAC 6
>hdaa0: Association 2 (3) trace succeeded
>hdaa0: Looking for additional DAC for association 0 (1)
>hdaa0: Looking for additional DAC for association 1 (2)
>hdaa0: Looking for additional DAC for association 2 (3)
>hdaa0: Tracing input monitor
>hdaa0: Tracing other input monitors
>hdaa0: Tracing beeper
>hdaa0:  nid 29 traced to out
>hdaa0: Pin sense: nid=33 sense=0x80000000 (connected)
>hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>pcm0: <Realtek ALC233 (Rear Analog Speaker)> at nid 27 on hdaa0
>pcm0: Playback:
>pcm0:      Stream cap: 0x00000001 PCM
>pcm0:         PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
>pcm0:             DAC: 2
>pcm0: 
>pcm0:     nid=27 [pin: Speaker (Black Jack)]
>pcm0:       + <- nid=12 [audio mixer] [src: pcm, speaker]
>pcm0:              + <- nid=2 [audio output] [src: pcm]
>pcm0:              + <- nid=11 [audio mixer] [src: speaker]
>pcm0:                     + <- nid=29 [beep widget] [src: speaker]
>pcm0: 
>pcm0: Master Volume (OSS: vol): -65/0dB
>pcm0:    +- ctl  1 (nid   2 out):    -65/0dB (88 steps)
>pcm0:    +- ctl 10 (nid  12 in   0): mute
>pcm0:    +- ctl 11 (nid  12 in   1): mute
>pcm0:    +- ctl 22 (nid  27 in ):    mute
>pcm0: 
>pcm0: PCM Volume (OSS: pcm): -65/0dB
>pcm0:    +- ctl  1 (nid   2 out):    -65/0dB (88 steps)
>pcm0:    +- ctl 10 (nid  12 in   0): mute
>pcm0: 
>pcm0: Speaker/Beep Volume (OSS: speaker): -34/12dB
>pcm0:    +- ctl  9 (nid  11 in   4): -34/12dB (32 steps) + mute
>pcm0:    +- ctl 11 (nid  12 in   1): mute
>pcm0: 
>pcm0: Input Monitoring Level (OSS: igain): 0/0dB
>pcm0:    +- ctl 11 (nid  12 in   1): mute
>pcm0: 
>pcm0: Mixer "vol":
>pcm0: Mixer "pcm":
>pcm0: Mixer "speaker":
>pcm0: Mixer "igain":
>pcm0: Mixer "ogain":
>pcm0: Playback channel set is: Front Left, Front Right, 
>pcm0: Playback channel matrix is: 2.0 (disconnected)
>pcm1: <Realtek ALC233 (Front Analog Headphones)> at nid 33 on hdaa0
>pcm1: Playback:
>pcm1:      Stream cap: 0x00000001 PCM
>pcm1:         PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
>pcm1:             DAC: 3
>pcm1: 
>pcm1:     nid=33 [pin: Headphones (Black Jack)]
>pcm1:       + <- nid=13 [audio mixer] [src: pcm, speaker]
>pcm1:              + <- nid=3 [audio output] [src: pcm]
>pcm1:              + <- nid=11 [audio mixer] [src: speaker]
>pcm1:                     + <- nid=29 [beep widget] [src: speaker]
>pcm1: 
>pcm1: Master Volume (OSS: vol): -65/0dB
>pcm1:    +- ctl  2 (nid   3 out):    -65/0dB (88 steps)
>pcm1:    +- ctl 12 (nid  13 in   0): mute
>pcm1:    +- ctl 13 (nid  13 in   1): mute
>pcm1:    +- ctl 24 (nid  33 in ):    mute
>pcm1: 
>pcm1: PCM Volume (OSS: pcm): -65/0dB
>pcm1:    +- ctl  2 (nid   3 out):    -65/0dB (88 steps)
>pcm1:    +- ctl 12 (nid  13 in   0): mute
>pcm1: 
>pcm1: Speaker/Beep Volume (OSS: speaker)
>pcm1:    +- ctl 13 (nid  13 in   1): mute
>pcm1: 
>pcm1: Input Monitoring Level (OSS: igain): 0/0dB
>pcm1:    +- ctl 13 (nid  13 in   1): mute
>pcm1: 
>pcm1: Mixer "vol":
>pcm1: Mixer "pcm":
>pcm1: Mixer "igain":
>pcm1: Mixer "ogain":
>pcm1: Playback channel set is: Front Left, Front Right, 
>pcm1: Playback channel matrix is: 2.0 (connected)
>pcm2: <Realtek ALC233 (Rear Digital)> at nid 30 on hdaa0
>pcm2: Playback:
>pcm2:      Stream cap: 0x00000005 AC3 PCM
>pcm2:         PCM cap: 0x000e05e0 16 20 24 bits, 44 48 88 96 192 KHz
>pcm2:             DAC: 6
>pcm2: 
>pcm2:     nid=30 [pin: SPDIF-out (Black Jack)]
>pcm2:       + <- nid=6 [audio output] [src: pcm]
>pcm2: 
>pcm2: Mixer "vol" -> "none": child=0x00000010
>pcm2: Mixer "pcm": parent="vol"
>pcm2: Soft PCM mixer ENABLED
>pcm2: Playback channel set is: Front Left, Front Right, 
>pcm2: Playback channel matrix is: 2.0 (unknown)
>hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0
>hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1
>hdaa1: Subsystem ID: 0x80860101
>hdaa1: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
>hdaa1: Original pins configuration:
>hdaa1: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa1:  3 18560010 1  0  Digital-out   Jack  Digital 0x18       Unknown 0
>hdaa1: Patched pins configuration:
>hdaa1: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa1:  3 18560010 1  0  Digital-out   Jack  Digital 0x18       Unknown 0
>hdaa1: 1 associations found:
>hdaa1: Association 0 (1) out:
>hdaa1:  Pin nid=3 seq=0
>hdaa1: Tracing association 0 (1)
>hdaa1:  Pin 3 traced to DAC 2
>hdaa1: Association 0 (1) trace succeeded
>hdaa1: Looking for additional DAC for association 0 (1)
>hdaa1: Tracing input monitor
>hdaa1: Tracing other input monitors
>hdaa1: Tracing beeper
>hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>pcm3: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1
>pcm3: Playback:
>pcm3:      Stream cap: 0x00000005 AC3 PCM
>pcm3:         PCM cap: 0x001a07f0 16 24 32 bits, 32 44 48 88 96 176 192 KHz
>pcm3:             DAC: 2
>pcm3: 
>pcm3:     nid=3 [pin: Digital-out (Jack)]
>pcm3:       + <- nid=2 [audio output] [src: pcm]
>pcm3: 
>pcm3: Master Volume (OSS: vol): 0/0dB
>pcm3:    +- ctl  1 (nid   3 in ):    mute
>pcm3: 
>pcm3: PCM Volume (OSS: pcm): 0/0dB
>pcm3:    +- ctl  1 (nid   3 in ):    mute
>pcm3: 
>pcm3: Mixer "vol":
>pcm3: Mixer "pcm":
>pcm3: Soft PCM mixer ENABLED
>pcm3: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
>pci0: driver added
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:8:0: reprobing on driver added
>ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
>ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
>ses0: SEMB SES Device
>nda0 at nvme0 bus 0 scbus2 target 0 lun 1
>GEOM: new disk nda0
>nda0: <WDC WDS256G1X0C-00ENX0 B35900WD 180693806166>
>nda0: Serial Number 180693806166
>nda0: nvme version 1.2 x4 (max x4) lanes PCIe Gen3 (max Gen3) link
>ses0: (none) in 'Slot 00', SATA Slot: scbus0 target 0
>nda0: 244198MB (500118192 512 byte sectors)
>ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>ada0: <Crucial CT275MX300SSD4 M0CR031> ACS-3 ATA SATA 3.x device
>ada0: Serial Number 16441482E248
>ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
>ada0: Command Queueing enabled
>ada0: 262321MB (537234768 512 byte sectors)
>pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
>pass0: <Crucial CT275MX300SSD4 M0CR031> ACS-3 ATA SATA 3.x device
>pass0: Serial Number 16441482E248
>pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
>pass0: Command Queueing enabled
>pass1 at ahciem0 bus 0 scbus1 target 0 lun 0
>pass1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
>pass2 at nvme0 bus 0 scbus2 target 0 lun 1
>pass2: <WDC WDS256G1X0C-00ENX0 B35900WD 180693806166>
>pass2: Serial Number 180693806166
>pass2: nvme version 1.2 x4 (max x4) lanes PCIe Gen3 (max Gen3) link
>found->	vendor=0x8086, dev=0xa131, revid=0x31
>	domain=0, bus=0, slot=20, func=2
>	class=11-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=18
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:20:2: reprobing on driver added
>found->	vendor=0x8086, dev=0xa13a, revid=0x31
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:0:22:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa121, revid=0x31
>	domain=0, bus=0, slot=31, func=2
>	class=05-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pci0:0:31:2: reprobing on driver added
>found->	vendor=0x8086, dev=0xa123, revid=0x31
>	domain=0, bus=0, slot=31, func=4
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>pci0:0:31:4: reprobing on driver added
>pci1: driver added
>pci2: driver added
>found->	vendor=0x8086, dev=0x24f3, revid=0x3a
>	domain=0, bus=3, slot=0, func=0
>	class=02-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=18
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:3:0:0: reprobing on driver added
>GEOM: new disk ada0
>pci3: driver added
>pci4: driver added
>pci5: driver added
>pci6: driver added
>pci7: driver added
>pci8: driver added
>Trying to mount root from zfs:zroot/ROOT/default []...
>uhub1: 4 ports with 0 removable, self powered
>uhub0: 24 ports with 24 removable, self powered
>Root mount waiting for: usbus0 usbus1
>ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
>uhub2 on uhub0
>uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0
>Root mount waiting for: usbus0 usbus1
>uhub2: 4 ports with 4 removable, self powered
>ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0
>uhub3 on uhub2
>uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus0
>Root mount waiting for: usbus0 usbus1
>uhub3: 4 ports with 4 removable, self powered
>ugen0.4: <Burr-Brown from TI USB Audio CODEC> at usbus0
>ugen0.5: <Logitech USB Receiver> at usbus0
>ukbd0 on uhub2
>ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 4> on usbus0
>kbd2 at ukbd0
>kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
>Root mount waiting for: usbus0
>Root mount waiting for: usbus0
>ugen0.6: <LaCie LaCie d2 DVDRW FW/USB> at usbus0
>umass0 on uhub0
>umass0: <Mass Storage> on usbus0
>umass0:3:0: Attached to scbus3
>(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
>GEOM: new disk cd0
>pass3 at umass-sim0 bus 0 scbus3 target 0 lun 0
>pass3: <PIONEER BD-RW   BDR-205 1.08> Removable CD-ROM SCSI device
>pass3: 40.000MB/s transfers
>cd0 at umass-sim0 bus 0 scbus3 target 0 lun 0
>cd0: <PIONEER BD-RW   BDR-205 1.08> Removable CD-ROM SCSI device
>cd0: 40.000MB/s transfers
>cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
>cd0: quirks=0x10<10_BYTE_ONLY>
>ugen0.7: <vendor 0x8087 product 0x0a2b> at usbus0
>efirtc0: providing initial system time
>start_init: trying /sbin/init
>pid 50 (zpool) is attempting to use unsafe AIO requests - not logging anymore
>pid 50 (zpool), jid 0, uid 0: exited on signal 6
>pid 56 (zpool), jid 0, uid 0: exited on signal 6
>linsysfs registered
>anon_inodefs registered
>pci0: driver added
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:8:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa131, revid=0x31
>	domain=0, bus=0, slot=20, func=2
>	class=11-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=18
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:20:2: reprobing on driver added
>found->	vendor=0x8086, dev=0xa13a, revid=0x31
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:0:22:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa121, revid=0x31
>	domain=0, bus=0, slot=31, func=2
>	class=05-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pci0:0:31:2: reprobing on driver added
>found->	vendor=0x8086, dev=0xa123, revid=0x31
>	domain=0, bus=0, slot=31, func=4
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>pci0:0:31:4: reprobing on driver added
>pci1: driver added
>pci2: driver added
>found->	vendor=0x8086, dev=0x24f3, revid=0x3a
>	domain=0, bus=3, slot=0, func=0
>	class=02-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=18
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:3:0:0: reprobing on driver added
>pci3: driver added
>pci4: driver added
>pci5: driver added
>pci6: driver added
>pci7: driver added
>pci8: driver added
>drmn0: <drmn> on vgapci0
>vgapci0: child drmn0 requested pci_enable_io
>vgapci0: child drmn0 requested pci_enable_io
>[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
>drmn0: Found 128MB of eDRAM
>VT: Replacing driver "efifb" with new "dummy".
>[drm] Got stolen memory base 0x30000000, size 0x10000000
>vgapci0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 143 to local APIC 6 vector 52
>vgapci0: using IRQ 143 for MSI
>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[drm] Driver supports precise vblank timestamp query.
>skl_dmc_ver1_27.bin: could not load firmware image, error 2
>[drm] Connector DP-1: get mode from tunables:
>[drm]   - kern.vt.fb.modes.DP-1
>[drm]   - kern.vt.fb.default_mode
>i915/skl_dmc_ver1_27.bin: could not load firmware image, error 2
>i915_skl_dmc_ver1_27.bin: could not load firmware image, error 2
>[drm] Connector DP-2: get mode from tunables:
>[drm]   - kern.vt.fb.modes.DP-2
>[drm]   - kern.vt.fb.default_mode
>[drm] Connector HDMI-A-1: get mode from tunables:
>[drm]   - kern.vt.fb.modes.HDMI-A-1
>[drm]   - kern.vt.fb.default_mode
>[drm] Connector DP-3: get mode from tunables:
>[drm]   - kern.vt.fb.modes.DP-3
>[drm]   - kern.vt.fb.default_mode
>[drm] Connector HDMI-A-2: get mode from tunables:
>[drm]   - kern.vt.fb.modes.HDMI-A-2
>[drm]   - kern.vt.fb.default_mode
>firmware: 'i915_skl_dmc_ver1_27_bin' version 0: 8928 bytes loaded at 0xffffffff834fb000
>drmn0: successfully loaded firmware image 'i915/skl_dmc_ver1_27.bin'
>[drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
>drmn0: Failed to program MOCS registers; expect performance issues.
>sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
>[drm] Initialized i915 1.6.0 20190822 for drmn0 on minor 0
>WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0.
>VT: Replacing driver "dummy" with new "fb".
>start FB_INFO:
>type=11 height=1080 width=1920 depth=32
>cmsize=16 size=8294400
>pbase=0x40000000 vbase=0xfffff80040000000
>name=drmn0 flags=0x0 stride=7680 bpp=32
>cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
>end FB_INFO
>drmn0: fb0: i915drmfb frame buffer device
>Intel(R) Wireless WiFi based driver for FreeBSD
>acpi_wmi0: <ACPI-WMI mapping> on acpi0
>acpi_wmi0: cannot find EC device
>acpi_wmi0: Embedded MOF found
>ACPI: \134AMW0.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20210930/nsarguments-361)
>acpi_wmi1: <ACPI-WMI mapping> on acpi0
>acpi_wmi1: cannot find EC device
>pci0: driver added
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:8:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa131, revid=0x31
>	domain=0, bus=0, slot=20, func=2
>	class=11-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=18
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:20:2: reprobing on driver added
>pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xdc34e000-0xdc34efff irq 18 at device 20.2 on pci0
>pchtherm0: Catastrophic Power Down Locked Enable
>pchtherm0: SMBus report  Enable
>pchtherm0: SMI on alert Locked Disable
>pchtherm0: TSPM: 6<Lock,DTSS0EN>
>pchtherm0: MAX Thermal Sensor Shutdown Time 32s
>pchtherm0: Throttling 5<Lock,TTEN>
>pchtherm0: TL2 flag 2<Lock>
>found->	vendor=0x8086, dev=0xa13a, revid=0x31
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:0:22:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa121, revid=0x31
>	domain=0, bus=0, slot=31, func=2
>	class=05-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pci0:0:31:2: reprobing on driver added
>found->	vendor=0x8086, dev=0xa123, revid=0x31
>	domain=0, bus=0, slot=31, func=4
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>pci0:0:31:4: reprobing on driver added
>ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xf040-0xf05f mem 0xdc34a000-0xdc34a0ff irq 16 at device 31.4 on pci0
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 53
>smbus0: <System Management Bus> on ichsmb0
>pci1: driver added
>pci2: driver added
>found->	vendor=0x8086, dev=0x24f3, revid=0x3a
>	domain=0, bus=3, slot=0, func=0
>	class=02-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=18
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:3:0:0: reprobing on driver added
>iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xdc100000-0xdc101fff irq 18 at device 0.0 on pci2
>iwm0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 144 to local APIC 2 vector 51
>iwm0: using IRQ 144 for MSI
>firmware: 'iwm8000Cfw' version 0: 2120860 bytes loaded at 0xffffffff83602000
>iwm0: hw rev 0x200, fw ver 22.361476.0, address 00:c2:c6:f5:4a:ec
>iwm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>iwm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>iwm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>pci3: driver added
>pci4: driver added
>pci5: driver added
>pci6: driver added
>pci7: driver added
>pci8: driver added
>pci0: driver added
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:8:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa13a, revid=0x31
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:0:22:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa121, revid=0x31
>	domain=0, bus=0, slot=31, func=2
>	class=05-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pci0:0:31:2: reprobing on driver added
>pci1: driver added
>pci2: driver added
>pci3: driver added
>pci4: driver added
>pci5: driver added
>pci6: driver added
>pci7: driver added
>pci8: driver added
>pci0: driver added
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:8:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa13a, revid=0x31
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:0:22:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa121, revid=0x31
>	domain=0, bus=0, slot=31, func=2
>	class=05-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pci0:0:31:2: reprobing on driver added
>pci1: driver added
>pci2: driver added
>pci3: driver added
>pci4: driver added
>pci5: driver added
>pci6: driver added
>pci7: driver added
>pci8: driver added
>pci0: driver added
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:8:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa13a, revid=0x31
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:0:22:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa121, revid=0x31
>	domain=0, bus=0, slot=31, func=2
>	class=05-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pci0:0:31:2: reprobing on driver added
>pci1: driver added
>pci2: driver added
>pci3: driver added
>pci4: driver added
>pci5: driver added
>pci6: driver added
>pci7: driver added
>pci8: driver added
>pci0: driver added
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:8:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa13a, revid=0x31
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=16
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:0:22:0: reprobing on driver added
>found->	vendor=0x8086, dev=0xa121, revid=0x31
>	domain=0, bus=0, slot=31, func=2
>	class=05-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pci0:0:31:2: reprobing on driver added
>pci1: driver added
>pci2: driver added
>pci3: driver added
>pci4: driver added
>pci5: driver added
>pci6: driver added
>pci7: driver added
>pci8: driver added
>cpuctl: access to MSR registers/cpuid info.
>No TSX change made
>CPU: Intel(R) Core(TM) i7-6770HQ CPU @ 2.60GHz (2591.99-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0x506e3  Family=0x6  Model=0x5e  Stepping=3
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>  AMD Features2=0x121<LAHF,ABM,Prefetch>
>  Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
>  Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
>  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>  IA32_ARCH_CAPS=0xc04<RSBA>
>  VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
>        Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
>        Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
>        Secondary Processor Controls=0x1fbcff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,EPT#VE,XSAVES>
>        Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
>        Entry Controls=0xda0400
>        EPT Features=0x6334141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
>        VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
>  TSC: P-state invariant, performance statistics
>Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries
>Data TLB: 4 KB pages, 4-way set associative, 64 entries
>Instruction TLB: 2M/4M pages, fully associative, 8 entries
>Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
>64-Byte prefetching
>Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries
>L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
>lo0: link state changed to UP
>em0: Link is up 1000 Mbps Full Duplex
>em0: link state changed to UP
>uaudio0 on uhub2
>uaudio0: <Burr-Brown from TI USB Audio CODEC, class 0/0, rev 1.10/1.00, addr 3> on usbus0
>uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
>uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
>uaudio0: Play[0]: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
>uaudio0: Record[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
>uaudio0: Record[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
>uaudio0: Record[0]: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
>uaudio0: Record[0]: 22050 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
>uaudio0: Record[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
>uaudio0: Record[0]: 11025 Hz, 2 ch, 16-bit S-LE PCM format, 2x2ms buffer.
>uaudio0: No MIDI sequencer.
>pcm4: <USB audio> on uaudio0
>pcm4: Mixer "vol" -> "none": child=0x00000010
>pcm4: Mixer "pcm": parent="vol"
>uaudio0: HID volume keys found.
>uhid0 on uhub2
>uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 4> on usbus0
>ums0 on uhub2
>ums0: <Logitech USB Receiver, class 0/0, rev 2.00/24.10, addr 4> on usbus0
>ums0: 16 buttons and [XYZT] coordinates ID=2
>ubt0 on uhub0
>ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.01, addr 6> on usbus0

Actions: View

Attachments on bug 261912: 233402 | 233403 | 240244 | 240245