Attachment 235599 Details for Bug 265514 – dmesg after patching

dmesg after patching

dmesg.txt (text/plain), 15.02 KB, created by john on 2022-08-01 03:33:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: john

Created: 2022-08-01 03:33:50 UTC

Size: 15.02 KB

patch

obsolete

>---<<BOOT>>---
>Copyright (c) 1992-2021 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.3-STABLE #0 working-n2968-79d6a7fe3-dirty: Wed Jul 27 12:08:16 EDT 2022
>    root@wagner.FEITH.COM:/usr/obj/usr/src/amd64.amd64/sys/CUSTOM amd64
>FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
>CPU: AMD Phenom(tm) II X4 910e Processor (2608.85-MHz K8-class CPU)
>  Origin="AuthenticAMD"  Id=0x100f43  Family=0x10  Model=0x4  Stepping=3
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x802009<SSE3,MON,CX16,POPCNT>
>  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
>  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
>  SVM: NP,NRIP,NAsids=64
>  TSC: P-state invariant
>real memory  = 6442450944 (6144 MB)
>avail memory = 5945151488 (5669 MB)
>Event timer "LAPIC" quality 100
>ACPI APIC Table: <081610 APIC1259>
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>FreeBSD/SMP: 1 package(s) x 4 core(s)
>random: unblocking device.
>Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20200430/tbfadt-796)
>Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20200430/tbfadt-748)
>ioapic0 <Version 2.1> irqs 0-23 on motherboard
>Launching APs: 3 2 1
>Timecounter "TSC-low" frequency 1304425946 Hz quality 800
>random: entropy device external interface
>WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
>[ath_hal] loaded
>[ath_dfs] loaded
>[ath_rate] loaded
>[ar9300] loaded
>[ar5212] loaded
>[ar5416] loaded
>[ar5211] loaded
>[ar5210] loaded
>[ath] loaded
>WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
>kbd1 at kbdmux0
>WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
>nexus0
>cryptosoft0: <software crypto> on motherboard
>acpi0: <081610 XSDT1259> on motherboard
>acpi0: Power Button (fixed)
>cpu0: <ACPI CPU> on acpi0
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 950
>Event timer "HPET" frequency 14318180 Hz quality 450
>Event timer "HPET1" frequency 14318180 Hz quality 450
>Event timer "HPET2" frequency 14318180 Hz quality 450
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfb3e0000-0xfb3effff,0xfb200000-0xfb2fffff irq 18 at device 5.0 on pci1
>vgapci0: Boot video device
>hdac0: <ATI RS780 HDA Controller> mem 0xfb3fc000-0xfb3fffff irq 19 at device 5.1 on pci1
>pcib2: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>igb0: <Intel(R) PRO/1000 82575EB (Copper)> port 0xd880-0xd89f mem 0xfbda0000-0xfbdbffff,0xfb400000-0xfb7fffff,0xfbdd8000-0xfbddbfff irq 18 at device 0.0 on pci2
>igb0: EEPROM V1.115-0 eTrack 0x87850000
>igb0: Using 1024 TX descriptors and 1024 RX descriptors
>igb0: Using 4 RX queues 4 TX queues
>igb0: Using MSI-X interrupts with 5 vectors
>igb0: Ethernet address: 00:1b:57:60:09:16
>igb1: <Intel(R) PRO/1000 82575EB (Copper)> port 0xdc00-0xdc1f mem 0xfbde0000-0xfbdfffff,0xfb800000-0xfbbfffff,0xfbddc000-0xfbddffff irq 19 at device 0.1 on pci2
>igb1: EEPROM V1.115-0 eTrack 0x87850000
>igb1: Using 1024 TX descriptors and 1024 RX descriptors
>igb1: Using 4 RX queues 4 TX queues
>igb1: Using MSI-X interrupts with 5 vectors
>igb1: Ethernet address: 00:1b:57:60:09:17
>pcib3: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>em0: <Intel(R) Gigabit CT 82574L> port 0xec00-0xec1f mem 0xfbee0000-0xfbefffff,0xfbe00000-0xfbe7ffff,0xfbedc000-0xfbedffff irq 16 at device 0.0 on pci3
>em0: EEPROM V1.8-0
>em0: Using 1024 TX descriptors and 1024 RX descriptors
>em0: Using 2 RX queues 2 TX queues
>em0: Using MSI-X interrupts with 3 vectors
>em0: Ethernet address: 00:1b:21:4e:96:da
>pcib4: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>ath0: <Atheros AR9580> mem 0xfbfe0000-0xfbffffff irq 17 at device 0.0 on pci4
>ar9300_flash_map: unimplemented for now
>Restoring Cal data from DRAM
>Restoring Cal data from EEPROM
>ar9300_hw_attach: ar9300_eeprom_attach returned 0
>ath0: [HT] enabling HT modes
>ath0: [HT] enabling short-GI in 20MHz mode
>ath0: [HT] 1 stream STBC receive enabled
>ath0: [HT] 1 stream STBC transmit enabled
>ath0: [HT] LDPC transmit/receive enabled
>ath0: [HT] 3 RX streams; 3 TX streams
>ath0: AR9580 mac 448.4 RF5110 phy 0.0
>ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
>ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfb1ffc00-0xfb1fffff irq 22 at device 17.0 on pci0
>ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
>ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich2: <AHCI channel> at channel 2 on ahci0
>ahcich3: <AHCI channel> at channel 3 on ahci0
>ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfb1fd000-0xfb1fdfff irq 16 at device 18.0 on pci0
>usbus0 on ohci0
>usbus0: 12Mbps Full Speed USB v1.0
>ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfb1fe000-0xfb1fefff irq 16 at device 18.1 on pci0
>usbus1 on ohci1
>usbus1: 12Mbps Full Speed USB v1.0
>ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfb1ff800-0xfb1ff8ff irq 17 at device 18.2 on pci0
>ehci0: AMD SB600/700 quirk applied
>usbus2: EHCI version 1.0
>usbus2 on ehci0
>usbus2: 480Mbps High Speed USB v2.0
>ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfb1fb000-0xfb1fbfff irq 18 at device 19.0 on pci0
>usbus3 on ohci2
>usbus3: 12Mbps Full Speed USB v1.0
>ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfb1fc000-0xfb1fcfff irq 18 at device 19.1 on pci0
>usbus4 on ohci3
>usbus4: 12Mbps Full Speed USB v1.0
>ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfb1ff400-0xfb1ff4ff irq 19 at device 19.2 on pci0
>ehci1: AMD SB600/700 quirk applied
>usbus5: EHCI version 1.0
>usbus5 on ehci1
>usbus5: 480Mbps High Speed USB v2.0
>intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
>intsmb0: intr SMI enabled revision 0
>intsmb0: using polling mode when configured interrupt is SMI
>smbus0: <System Management Bus> on intsmb0
>atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
>ata0: <ATA channel> at channel 0 on atapci0
>ata1: <ATA channel> at channel 1 on atapci0
>hdac1: <ATI SB600 HDA Controller> mem 0xfb1f4000-0xfb1f7fff irq 16 at device 20.2 on pci0
>isab0: <PCI-ISA bridge> at device 20.3 on pci0
>isa0: <ISA bus> on isab0
>pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>pci5: <ACPI PCI bus> on pcib5
>cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf4000000-0xf7ffffff irq 22 at device 7.0 on pci5
>cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
>iicbb0: <I2C bit-banging driver> on cxm_iic0
>iicbus0: <Philips I2C bus> on iicbb0 master-only
>cxm0: Philips FI1236 MK2 tuner
>cxm0: SAA7115 rev 1 video decoder
>cxm0: MSP3435G-B6 audio decoder
>cxm0: IR Remote
>cxm0: [GIANT-LOCKED]
>cxm0: encoder firmware version 0x2050032
>cxm0: decoder firmware version 0x2020023
>WARNING: Device "cxm" is Giant locked and may be deleted before FreeBSD 14.0.
>ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfb1fa000-0xfb1fafff irq 18 at device 20.5 on pci0
>usbus6 on ohci4
>usbus6: 12Mbps Full Speed USB v1.0
>amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
>acpi_button0: <Power Button> on acpi0
>aibs0: <ASUSTeK AI Booster (ACPI ASOC ATK0110)> on acpi0
>aibs0: v0: 0x06020000        Vcore Voltage   850 /  1600
>aibs0: v1: 0x06020001         +3.3 Voltage  2970 /  3630
>aibs0: v2: 0x06020002           +5 Voltage  4500 /  5500
>aibs0: v3: 0x06020003          +12 Voltage 10200 / 13800
>aibs0: t0: 0x06030000      CPU Temperature   600 /   950
>aibs0: t1: 0x06030001       MB Temperature   450 /   750
>aibs0: f0: 0x06040000        CPU FAN Speed   600 /  7200
>aibs0: f1: 0x06040001    CHASSIS FAN Speed   600 /  7200
>aibs0: f2: 0x06040002  CHASSIS FAN 2 Speed   600 /  7200
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
>orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>WARNING: Device "consolectl" is Giant locked and may be deleted before FreeBSD 14.0.
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
>amdsbwd0: <AMD SB600/SB7xx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0
>hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0
>pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0
>hdacc1: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac1
>hdaa1: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc1
>pcm1: <VIA VT1708S_0 (Analog 7.1+HP/2.0)> at nid 28,34,25,35,29 and 26,31,30,27 on hdaa1
>pcm2: <VIA VT1708S_0 (Digital)> at nid 32 on hdaa1
>pcm3: <VIA VT1708S_0 (Rear-panel Digital)> at nid 33 on hdaa1
>ugen3.1: <ATI OHCI root HUB> at usbus3
>ugen1.1: <ATI OHCI root HUB> at usbus1
>ugen2.1: <ATI EHCI root HUB> at usbus2
>ugen4.1: <ATI OHCI root HUB> at usbus4
>uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>ugen0.1: <ATI OHCI root HUB> at usbus0
>ugen5.1: <ATI EHCI root HUB> at usbus5
>ugen6.1: <ATI OHCI root HUB> at usbus6
>uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
>uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
>Trying to mount root from zfs:rpool []...
>Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6
>(aprobe0:ahcich0:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
>(aprobe0:ahcich0:0:15:0): CAM status: Command timeout
>(aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted
>(aprobe0:ahcich0:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
>(aprobe0:ahcich0:0:15:0): CAM status: Command timeout
>(aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted
>(aprobe2:ahcich2:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
>(aprobe2:ahcich2:0:15:0): CAM status: Command timeout
>(aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted
>uhub5: 2 ports with 2 removable, self powered
>uhub4: 3 ports with 3 removable, self powered
>uhub2: 3 ports with 3 removable, self powered
>uhub3: 3 ports with 3 removable, self powered
>uhub0: 3 ports with 3 removable, self powered
>Root mount waiting for: CAM usbus2 usbus5
>ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>ada0: <ST6000NM002A-2KF100 TN03> ACS-4 ATA SATA 3.x device
>ada0: Serial Number WSD1M8B2
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada0: Command Queueing enabled
>ada0: 5723166MB (11721045168 512 byte sectors)
>ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
>ada1: <ST6000NM002A-2KF100 TN03> ACS-4 ATA SATA 3.x device
>ada1: Serial Number WSD1KPN7
>ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada1: Command Queueing enabled
>ada1: 5723166MB (11721045168 512 byte sectors)
>cd0 at ata1 bus 0 scbus5 target 0 lun 0
>cd0: <Optiarc DVD RW AD-7260S 1.01> Removable CD-ROM SCSI device
>cd0: 150.000MB/s transfers (SATA, UDMA5, ATAPI 12bytes, PIO 8192bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
>uhub1: 6 ports with 6 removable, self powered
>uhub6: 6 ports with 6 removable, self powered
>Root mount waiting for: usbus2
>ugen2.2: <Lexmark Lexmark B2546dw> at usbus2
>ulpt0 on uhub1
>ulpt0: <Print> on usbus2
>ulpt0: using bi-directional mode
>Root mount waiting for: usbus2
>ugen0.2: <GemTek Corp USB FM Radio> at usbus0
>ufm0 on uhub4
>ufm0: <EndPoint1 Interrupt Pipe> on usbus0
>ufm0: Deprecated code (to be removed in FreeBSD 13): Driver no longer relevant
>Root mount waiting for: usbus2
>ugen2.3: <vendor 0x0424 product 0x2512> at usbus2
>uhub7: <vendor 0x0424 product 0x2512, class 9/0, rev 2.00/b.b3, addr 3> on usbus2
>uhub7: MTT enabled
>ugen0.3: <American Power Conversion Back-UPS RS 1500MS FW:952.e3 .D USB FW:e3> at usbus0
>uhub7: 2 ports with 2 removable, self powered
>Root mount waiting for: usbus2
>Root mount waiting for: usbus2
>ugen2.4: <Generic Ultra Fast Media> at usbus2
>Root mount waiting for: usbus2
>ugen2.5: <u-blox AG EVB-XPLR-M9-00-00> at usbus2
>uftdi0 on uhub7
>uftdi0: <EVB-XPLR-M9-00-00> on usbus2
>ugen1.2: <FTDI USB-UIRT> at usbus1
>uftdi1 on uhub2
>uftdi1: <USB-UIRT> on usbus1
>acpi_wmi0: <ACPI-WMI mapping> on acpi0
>acpi_wmi0: cannot find EC device
>device_attach: acpi_wmi0 attach returned 6
>wlan0: Ethernet address: 44:c3:06:48:14:e0
>lo0: link state changed to UP
>uhid0 on uhub4
>uhid0: <American Power Conversion Back-UPS RS 1500MS FW:952.e3 .D USB FW:e3, class 0/0, rev 2.00/0.90, addr 3> on usbus0
>umass0 on uhub7
>umass0: <Generic Ultra Fast Media, class 0/0, rev 2.00/1.98, addr 4> on usbus2
>da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
>da0: <Generic Ultra HS-COMBO 1.98> Removable Direct Access SCSI device
>da0: Serial Number 000000225001
>da0: 40.000MB/s transfers
>da0: 29554MB (60526592 512 byte sectors)
>da0: quirks=0x2<NO_6_BYTE>
>pflog0: promiscuous mode enabled
>igb1: link state changed to UP
>igb0: link state changed to UP
>em0: link state changed to UP
>WARNING: attempt to domain_add(netgraph) after domainfinalize()
>in_scrubprefix: err=65, prefix delete failed
>in_scrubprefix: err=65, prefix delete failed
>in_scrubprefix: err=65, prefix delete failed
>in_scrubprefix: err=65, prefix delete failed
>in_scrubprefix: err=65, prefix delete failed
>in_scrubprefix: err=65, prefix delete failed
>ugen0.3: <American Power Conversion Back-UPS RS 1500MS FW:952.e3 .D USB FW:e3> at usbus0 (disconnected)
>uhid0: at uhub4, port 3, addr 3 (disconnected)
>uhid0: detached
>ugen0.3: <American Power Conversion Back-UPS RS 1500MS FW:952.e3 .D USB FW:e3> at usbus0
>uhid0 on uhub4
>uhid0: <American Power Conversion Back-UPS RS 1500MS FW:952.e3 .D USB FW:e3, class 0/0, rev 2.00/0.90, addr 3> on usbus0

Actions: View

Attachments on bug 265514: 235555 | 235599 | 235600