FreeBSD Bugzilla – Attachment 241247 Details for
Bug 270409
NVMe: ABORTED - BY REQUEST for TOSHIBA THNSN51T02DUK
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
Verbose dmesg after an unsuccessful boot
dmesg_verboseKO (text/plain), 64.87 KB, created by
Thierry Thomas
on 2023-04-01 14:37:25 UTC
(
hide
)
Description:
Verbose dmesg after an unsuccessful boot
Filename:
MIME Type:
Creator:
Thierry Thomas
Created:
2023-04-01 14:37:25 UTC
Size:
64.87 KB
patch
obsolete
>---<<BOOT>>--- >APIC: Using the MADT enumerator. >Copyright (c) 1992-2023 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 14.0-CURRENT #0 main-n261544-cee09bda03c8: Thu Mar 16 08:11:20 UTC 2023 > root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 >FreeBSD clang version 15.0.7 (https://github.com/llvm/llvm-project.git llvmorg-15.0.7-0-g8dfdcc7b7bf6) >WARNING: WITNESS option enabled, expect reduced performance. >PPIM 0: PA=0xb8000, VA=0xffffffff82f10000, size=0x8000, mode=0 >pmap: large map 8 PML4 slots (4096 GB) >VT(vga): text 80x25 >Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff82b99540. >Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff82ba28d8. >Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff82ba30c0. >Preloaded hostuuid "/etc/hostid" at 0xffffffff82ba3118. >Preloaded elf obj module "/boot/kernel/cryptodev.ko" at 0xffffffff82ba3168. >Preloaded TSLOG data "TSLOG" at 0xffffffff82ba3958. >CPU: Intel(R) Core(TM) i7-7820HK CPU @ 2.90GHz (2900.00-MHz K8-class CPU) > Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> > AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> > AMD Features2=0x121<LAHF,ABM,Prefetch> > Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> > Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> > XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> > IA32_ARCH_CAPS=0xc04<RSBA> > VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE> > Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr> > Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE> > Secondary Processor Controls=0x5fbcff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,EPT#VE,XSAVES> > Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV> > Entry Controls=0xda0400 > EPT Features=0x6734141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all> > VPID Features=0xf01<INVVPID,individual,single,all,single-globals> > TSC: P-state invariant, performance statistics >Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries >Data TLB: 4 KB pages, 4-way set associative, 64 entries >Instruction TLB: 2M/4M pages, fully associative, 8 entries >Instruction TLB: 4KByte pages, 8-way set associative, 64 entries >64-Byte prefetching >Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries >L2 cache: 256 kbytes, 8-way associative, 64 bytes/line >real memory = 34359738368 (32768 MB) >Physical memory chunk(s): >0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages) >0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages) >0x0000000002f00000 - 0x000000005835ffff, 1430650880 bytes (349280 pages) >0x0000000058380000 - 0x0000000059818fff, 21598208 bytes (5273 pages) >0x000000005981b000 - 0x0000000068db0fff, 257515520 bytes (62870 pages) >0x000000006affe000 - 0x000000006affefff, 4096 bytes (1 pages) >0x0000000100001000 - 0x0000000856d52fff, 31521579008 bytes (7695698 pages) >0x000000088ec00000 - 0x000000088ec74fff, 479232 bytes (117 pages) >avail memory = 33149026304 (31613 MB) >MADT: Found CPU APIC ID 0 ACPI ID 1: enabled >SMP: Added CPU 0 (AP) >MADT: Found CPU APIC ID 2 ACPI ID 2: enabled >SMP: Added CPU 2 (AP) >MADT: Found CPU APIC ID 4 ACPI ID 3: enabled >SMP: Added CPU 4 (AP) >MADT: Found CPU APIC ID 6 ACPI ID 4: enabled >SMP: Added CPU 6 (AP) >MADT: Found CPU APIC ID 1 ACPI ID 5: enabled >SMP: Added CPU 1 (AP) >MADT: Found CPU APIC ID 3 ACPI ID 6: enabled >SMP: Added CPU 3 (AP) >MADT: Found CPU APIC ID 5 ACPI ID 7: enabled >SMP: Added CPU 5 (AP) >MADT: Found CPU APIC ID 7 ACPI ID 8: enabled >SMP: Added CPU 7 (AP) >Event timer "LAPIC" quality 600 >ACPI APIC Table: <ALWARE ALIENWRE> >Package ID shift: 4 >L3 cache ID shift: 4 >L2 cache ID shift: 1 >L1 cache ID shift: 1 >Core ID shift: 1 >AP boot address 0x98000 >INTR: Adding local APIC 2 as a target >INTR: Adding local APIC 4 as a target >INTR: Adding local APIC 6 as a target >FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs >FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads >Package HW ID = 0 > Core HW ID = 0 > CPU0 (BSP): APIC ID: 0 > CPU1 (AP/HT): APIC ID: 1 > Core HW ID = 1 > CPU2 (AP): APIC ID: 2 > CPU3 (AP/HT): APIC ID: 3 > Core HW ID = 2 > CPU4 (AP): APIC ID: 4 > CPU5 (AP/HT): APIC ID: 5 > Core HW ID = 3 > CPU6 (AP): APIC ID: 6 > CPU7 (AP/HT): APIC ID: 7 >APIC: CPU 0 has ACPI ID 1 >APIC: CPU 1 has ACPI ID 5 >APIC: CPU 2 has ACPI ID 2 >APIC: CPU 3 has ACPI ID 6 >APIC: CPU 4 has ACPI ID 3 >APIC: CPU 5 has ACPI ID 7 >APIC: CPU 6 has ACPI ID 4 >APIC: CPU 7 has ACPI ID 8 >Pentium Pro MTRR support enabled >x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000 >x86bios: SSEG 0x098000-0x098fff at 0xfffffe003c71b000 >x86bios: EBDA 0x09c000-0x09ffff at 0xfffff8000009c000 >x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000 >random: registering fast source Intel Secure Key RNG >random: fast provider: "Intel Secure Key RNG" >random: read 4096 bytes from preloaded cache >random: no platform bootloader entropy >random: unblocking device. >VIMAGE (virtualized network stack) enabled >hostuuid: using 4c4c4544-0035-4a10-8036-c4c04f304732 >ULE: setup cpu 0 >ULE: setup cpu 1 >ULE: setup cpu 2 >ULE: setup cpu 3 >ULE: setup cpu 4 >ULE: setup cpu 5 >ULE: setup cpu 6 >ULE: setup cpu 7 >ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALWARE) >ACPI: XSDT 0x000000006A0390B8 0000EC (v01 ALWARE ALIENWRE 01072009 AMI 00010013) >ACPI: FACP 0x000000006A063A00 000114 (v06 ALWARE ALIENWRE 01072009 AMI 00010013) >ACPI: DSDT 0x000000006A039230 02A7CF (v02 ALWARE ALIENWRE 01072009 INTL 20160422) >ACPI: FACS 0x000000006A8BE540 000040 >ACPI: APIC 0x000000006A063B18 0000BC (v03 ALWARE ALIENWRE 01072009 AMI 00010013) >ACPI: FPDT 0x000000006A063BD8 000044 (v01 ALWARE ALIENWRE 01072009 AMI 00010013) >ACPI: MCFG 0x000000006A063C20 00003C (v01 ALWARE ALIENWRE 01072009 MSFT 00000097) >ACPI: SSDT 0x000000006A063C60 000462 (v01 SataRe SataTabl 00001000 INTL 20160422) >ACPI: FIDT 0x000000006A0640C8 00009C (v01 ALWARE ALIENWRE 01072009 AMI 00010013) >ACPI: SSDT 0x000000006A064168 005604 (v02 DptfTa DptfTabl 00001000 INTL 20160422) >ACPI: BOOT 0x000000006A069770 000028 (v01 ALWARE ALIENWRE 01072009 AMI 00010013) >ACPI: SLIC 0x000000006A069798 000176 (v01 ALWARE ALIENWRE 01072009 AMI 00010013) >ACPI: SSDT 0x000000006A069910 003163 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) >ACPI: SSDT 0x000000006A06CA78 0029D5 (v02 PegSsd PegSsdt 00001000 INTL 20160422) >ACPI: HPET 0x000000006A06F450 000038 (v01 INTEL KBL 00000001 MSFT 0000005F) >ACPI: SSDT 0x000000006A06F488 000939 (v02 INTEL xh_rvp11 00000000 INTL 20160422) >ACPI: UEFI 0x000000006A06FDC8 000042 (v01 INTEL EDK2 00000002 01000013) >ACPI: MSDM 0x000000006A06FE10 000055 (v03 ALWARE ALIENWRE 01072009 AMI 00010013) >ACPI: SSDT 0x000000006A06FE68 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) >ACPI: LPIT 0x000000006A070D48 000094 (v01 INTEL KBL 00000000 MSFT 0000005F) >ACPI: WSMT 0x000000006A070DE0 000028 (v01 INTEL KBL 00000000 MSFT 0000005F) >ACPI: SSDT 0x000000006A070E08 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) >ACPI: SSDT 0x000000006A0710A8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) >ACPI: DBGP 0x000000006A0740B0 000034 (v01 INTEL 00000002 MSFT 0000005F) >ACPI: DBG2 0x000000006A0740E8 000054 (v00 INTEL 00000002 MSFT 0000005F) >ACPI: DMAR 0x000000006A074140 0000A8 (v01 INTEL KBL 00000001 INTL 00000001) >ACPI: SSDT 0x000000006A0741E8 0064D6 (v01 OptRef OptTabl 00001000 INTL 20160422) >MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 >ioapic0: ver 0x20 maxredir 0x77 >ioapic0: Routing external 8259A's -> intpin 0 >lapic0: Routing NMI -> LINT1 >lapic0: LINT1 trigger: edge >lapic0: LINT1 polarity: high >lapic2: Routing NMI -> LINT1 >lapic2: LINT1 trigger: edge >lapic2: LINT1 polarity: high >lapic4: Routing NMI -> LINT1 >lapic4: LINT1 trigger: edge >lapic4: LINT1 polarity: high >lapic6: Routing NMI -> LINT1 >lapic6: LINT1 trigger: edge >lapic6: LINT1 polarity: high >lapic1: Routing NMI -> LINT1 >lapic1: LINT1 trigger: edge >lapic1: LINT1 polarity: high >lapic3: Routing NMI -> LINT1 >lapic3: LINT1 trigger: edge >lapic3: LINT1 polarity: high >lapic5: Routing NMI -> LINT1 >lapic5: LINT1 trigger: edge >lapic5: LINT1 polarity: high >lapic7: Routing NMI -> LINT1 >lapic7: LINT1 trigger: edge >lapic7: LINT1 polarity: high >MADT: Interrupt override: source 0, irq 2 >ioapic0: Routing IRQ 0 -> intpin 2 >MADT: Interrupt override: source 9, irq 9 >ioapic0: intpin 9 trigger: level >ioapic0 <Version 2.0> irqs 0-119 >cpu0 BSP: > ID: 0x00000000 VER: 0x01060015 LDR: 0x00000001 DFR: 0x00000000 x2APIC: 1 > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 >SMP: AP CPU #1 Launched! >cpu1 AP: > ID: 0x00000001 VER: 0x01060015 LDR: 0x00000002 DFR: 0x00000000 x2APIC: 1 > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000100f2 >SMP: AP CPU #5 Launched! >cpu5 AP: > ID: 0x00000005 VER: 0x01060015 LDR: 0x00000020 DFR: 0x00000000 x2APIC: 1 > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 >SMP: AP CPU #2 Launched! >cpu2 AP: > ID: 0x00000002 VER: 0x01060015 LDR: 0x00000004 DFR: 0x00000000 x2APIC: 1 > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 >SMP: AP CPU #6 Launched! >cpu6 AP: > ID: 0x00000006 VER: 0x01060015 LDR: 0x00000040 DFR: 0x00000000 x2APIC: 1 > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000000f2 >SMP: AP CPU #7 Launched! >cpu7 AP: > ID: 0x00000007 VER: 0x01060015 LDR: 0x00000080 DFR: 0x00000000 x2APIC: 1 > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000100f2 >SMP: AP CPU #3 Launched! >cpu3 AP: > ID: 0x00000003 VER: 0x01060015 LDR: 0x00000008 DFR: 0x00000000 x2APIC: 1 > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000100f2 >SMP: AP CPU #4 Launched! >cpu4 AP: > ID: 0x00000004 VER: 0x01060015 LDR: 0x00000010 DFR: 0x00000000 x2APIC: 1 > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff > timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 > cmci: 0x000100f2 >SMP: failed TSC synchronization test >TSC timecounter discards lower 1 bit(s) >random: entropy device external interface >wlan: <802.11 Link Layer> >snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] >feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 >EFI systbl not available >kbd: new array size 4 >kbd1 at kbdmux0 >mem: <memory> >crypto: <crypto core> >null: <full device, null device, zero device> >[ath_hal] loaded >io: <I/O> >tcp_log: tcp_log device >vtvga0: <VT VGA driver> >smbios0: <System Management BIOS> at iomem 0xf05e0-0xf05fe >smbios0: Version: 3.0, BCD Revision: 3.0 >crypto: assign cryptosoft0 driver id 0, flags 0x6000000 >aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> >crypto: assign aesni0 driver id 1, flags 0xe000000 >acpi0: <ALWARE ALIENWRE> >ACPI: 10 ACPI AML tables successfully acquired and loaded >PCIe: Memory Mapped configuration base @ 0xe0000000 >ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 >acpi0: Power Button (fixed) >acpi0: wakeup code va 0xfffffe00e44a1000 pa 0x99000 >cpu0: <ACPI CPU> on acpi0 >ACPI: Dynamic OEM Table Load: >ACPI: SSDT 0xFFFFF80003C10400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) >ACPI: Dynamic OEM Table Load: >ACPI: SSDT 0xFFFFF80003F2A800 000672 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) >cpu2: <ACPI CPU> on acpi0 >ACPI: Dynamic OEM Table Load: >ACPI: SSDT 0xFFFFF80003F2B800 00065C (v02 PmRef ApIst 00003000 INTL 20160422) >ACPI: Dynamic OEM Table Load: >ACPI: SSDT 0xFFFFF80003C14800 00018A (v02 PmRef ApCst 00003000 INTL 20160422) >cpu4: <ACPI CPU> on acpi0 >cpu6: <ACPI CPU> on acpi0 >cpu1: <ACPI CPU> on acpi0 >cpu3: <ACPI CPU> on acpi0 >cpu5: <ACPI CPU> on acpi0 >cpu7: <ACPI CPU> on acpi0 >hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >hpet0: vendor 0x8086, rev 0x1, 24000000Hz 64bit, 8 timers, legacy route >hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic >hpet0: t1: irqs 0x00f00000 (0), MSI >hpet0: t2: irqs 0x00f00800 (0), MSI >hpet0: t3: irqs 0x00f01000 (0), MSI >hpet0: t4: irqs 0x00000000 (0), MSI >hpet0: t5: irqs 0x00000000 (0), MSI >hpet0: t6: irqs 0x00000000 (0), MSI >hpet0: t7: irqs 0x00000000 (0), MSI >Timecounter "HPET" frequency 24000000 Hz quality 950 >msi: routing MSI-X IRQ 120 to local APIC 2 vector 48 >msi: routing MSI-X IRQ 121 to local APIC 4 vector 48 >msi: routing MSI-X IRQ 122 to local APIC 6 vector 48 >msi: routing MSI-X IRQ 123 to local APIC 0 vector 49 >msi: routing MSI-X IRQ 124 to local APIC 2 vector 49 >msi: routing MSI-X IRQ 125 to local APIC 4 vector 49 >msi: routing MSI-X IRQ 126 to local APIC 6 vector 49 >msi: routing MSI-X IRQ 127 to local APIC 0 vector 50 >msi: Assigning MSI-X IRQ 120 to local APIC 0 vector 51 >msi: Assigning MSI-X IRQ 121 to local APIC 1 vector 48 >msi: Assigning MSI-X IRQ 122 to local APIC 2 vector 48 >msi: Assigning MSI-X IRQ 123 to local APIC 3 vector 48 >msi: Assigning MSI-X IRQ 124 to local APIC 4 vector 48 >msi: Assigning MSI-X IRQ 125 to local APIC 5 vector 48 >msi: Assigning MSI-X IRQ 127 to local APIC 7 vector 48 >Event timer "HPET" frequency 24000000 Hz quality 550 >atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 >atrtc0: Warning: Couldn't map I/O. >atrtc0: registered as a time-of-day clock, resolution 1.000000s >ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 49 >ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49 >Event timer "RTC" frequency 32768 Hz quality 0 >attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 >Timecounter "i8254" frequency 1193182 Hz quality 0 >ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 4 vector 49 >Event timer "i8254" frequency 1193182 Hz quality 100 >ACPI timer: -> 10 >Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 >acpi_ec0: <Embedded Controller: GPE 0x14> port 0x62,0x66 on acpi0 >pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 >pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 10 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 10 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 >pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 >pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 >pci_link4: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 >pci_link5: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 >pci_link6: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 >pci_link7: Index IRQ Rtd Ref IRQs > Initial Probe 0 11 N 0 3 4 5 6 10 11 12 14 15 > Validation 0 11 N 0 3 4 5 6 10 11 12 14 15 > After Disable 0 255 N 0 3 4 5 6 10 11 12 14 15 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pcib0: decoding 5 range 0-0xfe >pcib0: decoding 4 range 0-0xcf7 >pcib0: decoding 4 range 0xd00-0xffff >pcib0: decoding 3 range 0xa0000-0xbffff >pcib0: decoding 3 range 0x70000000-0xdfffffff >pcib0: decoding 3 range 0xfd000000-0xfe7fffff >pci0: <ACPI PCI bus> on pcib0 >pci0: domain=0, physical bus=0 >found-> vendor=0x8086, dev=0x5910, revid=0x05 > domain=0, bus=0, slot=0, func=0 > class=06-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >found-> vendor=0x8086, dev=0x1901, revid=0x05 > domain=0, bus=0, slot=1, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.1.INTA >pcib0: slot 1 INTA hardwired to IRQ 16 > secbus=1, subbus=1 >found-> vendor=0x8086, dev=0x1909, revid=0x05 > domain=0, bus=0, slot=1, func=2 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.1.INTA >pcib0: slot 1 INTA hardwired to IRQ 16 > secbus=2, subbus=58 >found-> vendor=0x8086, dev=0x591b, revid=0x04 > domain=0, bus=0, slot=2, func=0 > class=03-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 64, base 0xdb000000, size 24, enabled >pcib0: allocated type 3 (0xdb000000-0xdbffffff) for rid 10 of pci0:0:2:0 > map[18]: type Prefetchable Memory, range 64, base 0x70000000, size 28, enabled >pcib0: allocated type 3 (0x70000000-0x7fffffff) for rid 18 of pci0:0:2:0 > map[20]: type I/O Port, range 32, base 0xf000, size 6, enabled >pcib0: allocated type 4 (0xf000-0xf03f) for rid 20 of pci0:0:2:0 >pcib0: matched entry for 0.2.INTA >pcib0: slot 2 INTA hardwired to IRQ 16 >found-> vendor=0x8086, dev=0x1903, revid=0x05 > domain=0, bus=0, slot=4, func=0 > class=11-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 64, base 0xdd120000, size 15, enabled >pcib0: allocated type 3 (0xdd120000-0xdd127fff) for rid 10 of pci0:0:4:0 >pcib0: matched entry for 0.4.INTA >pcib0: slot 4 INTA hardwired to IRQ 16 >found-> vendor=0x8086, dev=0xa12f, revid=0x31 > domain=0, bus=0, slot=20, func=0 > class=0c-03-30, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type Memory, range 64, base 0xdd110000, size 16, enabled >pcib0: allocated type 3 (0xdd110000-0xdd11ffff) for rid 10 of pci0:0:20:0 >pcib0: matched entry for 0.20.INTA >pcib0: slot 20 INTA hardwired to IRQ 16 >found-> vendor=0x8086, dev=0xa131, revid=0x31 > domain=0, bus=0, slot=20, func=2 > class=11-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 64, base 0xdd136000, size 12, enabled >pcib0: allocated type 3 (0xdd136000-0xdd136fff) for rid 10 of pci0:0:20:2 >pcib0: matched entry for 0.20.INTC >pcib0: slot 20 INTC hardwired to IRQ 18 >found-> vendor=0x8086, dev=0xa13a, revid=0x31 > domain=0, bus=0, slot=22, func=0 > class=07-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xdd135000, size 12, memory disabled >pcib0: allocated type 3 (0xdd135000-0xdd135fff) for rid 10 of pci0:0:22:0 >pcib0: matched entry for 0.22.INTA >pcib0: slot 22 INTA hardwired to IRQ 16 >found-> vendor=0x8086, dev=0xa102, revid=0x31 > domain=0, bus=0, slot=23, func=0 > class=01-06-01, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > map[10]: type Memory, range 32, base 0xdd130000, size 13, enabled >pcib0: allocated type 3 (0xdd130000-0xdd131fff) for rid 10 of pci0:0:23:0 > map[14]: type Memory, range 32, base 0xdd134000, size 8, enabled >pcib0: allocated type 3 (0xdd134000-0xdd1340ff) for rid 14 of pci0:0:23:0 > map[18]: type I/O Port, range 32, base 0xf090, size 3, enabled >pcib0: allocated type 4 (0xf090-0xf097) for rid 18 of pci0:0:23:0 > map[1c]: type I/O Port, range 32, base 0xf080, size 2, enabled >pcib0: allocated type 4 (0xf080-0xf083) for rid 1c of pci0:0:23:0 > map[20]: type I/O Port, range 32, base 0xf060, size 5, enabled >pcib0: allocated type 4 (0xf060-0xf07f) for rid 20 of pci0:0:23:0 > map[24]: type Memory, range 32, base 0xdd133000, size 11, enabled >pcib0: allocated type 3 (0xdd133000-0xdd1337ff) for rid 24 of pci0:0:23:0 >pcib0: matched entry for 0.23.INTA >pcib0: slot 23 INTA hardwired to IRQ 16 >found-> vendor=0x8086, dev=0xa167, revid=0xf1 > domain=0, bus=0, slot=27, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.27.INTA >pcib0: slot 27 INTA hardwired to IRQ 16 > secbus=59, subbus=59 >found-> vendor=0x8086, dev=0xa110, revid=0xf1 > domain=0, bus=0, slot=28, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.28.INTA >pcib0: slot 28 INTA hardwired to IRQ 16 > secbus=60, subbus=60 >found-> vendor=0x8086, dev=0xa114, revid=0xf1 > domain=0, bus=0, slot=28, func=4 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.28.INTA >pcib0: slot 28 INTA hardwired to IRQ 16 > secbus=61, subbus=61 >found-> vendor=0x8086, dev=0xa115, revid=0xf1 > domain=0, bus=0, slot=28, func=5 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=b, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.28.INTB >pcib0: slot 28 INTB hardwired to IRQ 17 > secbus=62, subbus=62 >found-> vendor=0x8086, dev=0xa118, revid=0xf1 > domain=0, bus=0, slot=29, func=0 > class=06-04-00, hdrtype=0x01, mfdev=1 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pcib0: matched entry for 0.29.INTA >pcib0: slot 29 INTA hardwired to IRQ 16 > secbus=63, subbus=63 >found-> vendor=0x8086, dev=0xa154, revid=0x31 > domain=0, bus=0, slot=31, func=0 > class=06-01-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >found-> vendor=0x8086, dev=0xa121, revid=0x31 > domain=0, bus=0, slot=31, func=2 > class=05-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > map[10]: type Memory, range 32, base 0xdd12c000, size 14, enabled >pcib0: allocated type 3 (0xdd12c000-0xdd12ffff) for rid 10 of pci0:0:31:2 >found-> vendor=0x8086, dev=0xa171, revid=0x31 > domain=0, bus=0, slot=31, func=3 > class=04-03-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 64, base 0xdd128000, size 14, enabled >pcib0: allocated type 3 (0xdd128000-0xdd12bfff) for rid 10 of pci0:0:31:3 > map[20]: type Memory, range 64, base 0xdd100000, size 16, enabled >pcib0: allocated type 3 (0xdd100000-0xdd10ffff) for rid 20 of pci0:0:31:3 >pcib0: matched entry for 0.31.INTA >pcib0: slot 31 INTA hardwired to IRQ 16 >found-> vendor=0x8086, dev=0xa123, revid=0x31 > domain=0, bus=0, slot=31, func=4 > class=0c-05-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > map[10]: type Memory, range 64, base 0xdd132000, size 8, enabled >pcib0: allocated type 3 (0xdd132000-0xdd1320ff) for rid 10 of pci0:0:31:4 > map[20]: type I/O Port, range 32, base 0xf040, size 5, enabled >pcib0: allocated type 4 (0xf040-0xf05f) for rid 20 of pci0:0:31:4 >pcib0: matched entry for 0.31.INTA >pcib0: slot 31 INTA hardwired to IRQ 16 >pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 >pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib1 >pcib0: allocated type 3 (0xdc000000-0xdd0fffff) for rid 20 of pcib1 >pcib0: allocated type 3 (0xb0000000-0xc1ffffff) for rid 24 of pcib1 >pcib1: domain 0 >pcib1: secondary bus 1 >pcib1: subordinate bus 1 >pcib1: I/O decode 0xe000-0xefff >pcib1: memory decode 0xdc000000-0xdd0fffff >pcib1: prefetched decode 0xb0000000-0xc1ffffff >pcib1: special decode VGA >pci1: <ACPI PCI bus> on pcib1 >pcib1: allocated bus range (1-1) for rid 0 of pci1 >pci1: domain=0, physical bus=1 >found-> vendor=0x10de, dev=0x1be0, revid=0xa1 > domain=0, bus=1, slot=0, func=0 > class=03-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Memory, range 32, base 0xdc000000, size 24, enabled >pcib1: allocated memory range (0xdc000000-0xdcffffff) for rid 10 of pci0:1:0:0 > map[14]: type Prefetchable Memory, range 64, base 0xb0000000, size 28, enabled >pcib1: allocated prefetch range (0xb0000000-0xbfffffff) for rid 14 of pci0:1:0:0 > map[1c]: type Prefetchable Memory, range 64, base 0xc0000000, size 25, enabled >pcib1: allocated prefetch range (0xc0000000-0xc1ffffff) for rid 1c of pci0:1:0:0 > map[24]: type I/O Port, range 32, base 0xe000, size 7, enabled >pcib1: allocated I/O port range (0xe000-0xe07f) for rid 24 of pci0:1:0:0 >pcib1: matched entry for 1.0.INTA >pcib1: slot 0 INTA hardwired to IRQ 16 >vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xdc000000-0xdcffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff irq 16 at device 0.0 on pci1 >vgapci0: Boot video device >pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.2 on pci0 >pcib0: allocated type 3 (0xc4000000-0xda0fffff) for rid 20 of pcib2 >pcib0: allocated type 3 (0x80000000-0xa1ffffff) for rid 24 of pcib2 >pcib2: domain 0 >pcib2: secondary bus 2 >pcib2: subordinate bus 58 >pcib2: memory decode 0xc4000000-0xda0fffff >pcib2: prefetched decode 0x80000000-0xa1ffffff >pcib2: special decode ISA >pci2: <ACPI PCI bus> on pcib2 >pcib2: allocated bus range (2-2) for rid 0 of pci2 >pci2: domain=0, physical bus=2 >vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xdb000000-0xdbffffff,0x70000000-0x7fffffff irq 16 at device 2.0 on pci0 >pci0: <dasp> at device 4.0 (no driver attached) >xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdd110000-0xdd11ffff irq 16 at device 20.0 on pci0 >xhci0: 32 bytes context size, 64-bit DMA >xhci0: attempting to allocate 1 MSI vectors (8 supported) >msi: routing MSI IRQ 128 to local APIC 6 vector 48 >xhci0: using IRQ 128 for MSI >xhci0: MSI enabled >usbus0 on xhci0 >xhci0: usbpf: Attached >usbus0: 5.0Gbps Super Speed USB v3.0 >pci0: <dasp> at device 20.2 (no driver attached) >pci0: <simple comms> at device 22.0 (no driver attached) >ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdd130000-0xdd131fff,0xdd134000-0xdd1340ff,0xdd133000-0xdd1337ff irq 16 at device 23.0 on pci0 >ahci0: attempting to allocate 1 MSI vectors (1 supported) >msi: routing MSI IRQ 129 to local APIC 0 vector 50 >ahci0: using IRQ 129 for MSI >ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported >ahci0: Caps: 64bit NCQ SNTF ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM 2ports >ahci0: Caps2: DESO SADM SDS APST >ahcich0: not probed (disabled) >ahcich1: not probed (disabled) >ahcich2: <AHCI channel> at channel 2 on ahci0 >ahcich2: Caps: >ahcich3: <AHCI channel> at channel 3 on ahci0 >ahcich3: Caps: >ahciem0: <AHCI enclosure management bridge> on ahci0 >ahciem0: Caps: ALHD XMT SMB LED >pcib3: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0 >pcib0: allocated type 3 (0xdd600000-0xdd6fffff) for rid 20 of pcib3 >pcib3: domain 0 >pcib3: secondary bus 59 >pcib3: subordinate bus 59 >pcib3: memory decode 0xdd600000-0xdd6fffff >pci3: <ACPI PCI bus> on pcib3 >pcib3: allocated bus range (59-59) for rid 0 of pci3 >pci3: domain=0, physical bus=59 >found-> vendor=0x1179, dev=0x0115, revid=0x01 > domain=0, bus=59, slot=0, func=0 > class=01-08-02, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > MSI-X supports 8 messages in map 0x10 > map[10]: type Memory, range 64, base 0xdd600000, size 14, enabled >pcib3: allocated memory range (0xdd600000-0xdd603fff) for rid 10 of pci0:59:0:0 >pcib3: matched entry for 59.0.INTA >pcib3: slot 0 INTA hardwired to IRQ 16 >nvme0: <Generic NVMe Device> mem 0xdd600000-0xdd603fff irq 16 at device 0.0 on pci3 >nvme0: attempting to allocate 5 MSI-X vectors (8 supported) >msi: routing MSI-X IRQ 130 to local APIC 2 vector 49 >msi: routing MSI-X IRQ 131 to local APIC 4 vector 50 >msi: routing MSI-X IRQ 132 to local APIC 6 vector 50 >msi: routing MSI-X IRQ 133 to local APIC 0 vector 52 >msi: routing MSI-X IRQ 134 to local APIC 2 vector 50 >nvme0: using IRQs 130-134 for MSI-X >nvme0: CapLo: 0x2803007f: MQES 127, CQR, AMS WRRwUPC, TO 40 >nvme0: CapHi: 0x00000030: DSTRD 0, NSSRS, CSS 1, MPSMIN 0, MPSMAX 0 >nvme0: Version: 0x00010100: 1.1 >pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 >pcib4: attempting to allocate 1 MSI vectors (1 supported) >msi: routing MSI IRQ 135 to local APIC 4 vector 51 >pcib4: using IRQ 135 for MSI >pcib4: HotPlug command: 0000 -> 1028 >pcib4: domain 0 >pcib4: secondary bus 60 >pcib4: subordinate bus 60 >pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 >pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib5 >pcib0: allocated type 3 (0xdd500000-0xdd5fffff) for rid 20 of pcib5 >pcib5: domain 0 >pcib5: secondary bus 61 >pcib5: subordinate bus 61 >pcib5: I/O decode 0xd000-0xdfff >pcib5: memory decode 0xdd500000-0xdd5fffff >pci4: <ACPI PCI bus> on pcib5 >pcib5: allocated bus range (61-61) for rid 0 of pci4 >pci4: domain=0, physical bus=61 >found-> vendor=0x1969, dev=0xe0b1, revid=0x10 > domain=0, bus=61, slot=0, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 16 messages, 64 bit, vector masks > MSI-X supports 16 messages in map 0x10 > map[10]: type Memory, range 64, base 0xdd500000, size 18, enabled >pcib5: allocated memory range (0xdd500000-0xdd53ffff) for rid 10 of pci0:61:0:0 > map[18]: type I/O Port, range 32, base 0xd000, size 7, enabled >pcib5: allocated I/O port range (0xd000-0xd07f) for rid 18 of pci0:61:0:0 >pcib5: matched entry for 61.0.INTA >pcib5: slot 0 INTA hardwired to IRQ 16 >alc0: <Killer E2500 Gigabit Ethernet> port 0xd000-0xd07f mem 0xdd500000-0xdd53ffff irq 16 at device 0.0 on pci4 >alc0: PCI device revision : 0x0010 >alc0: Chip id/revision : 0xc002 >alc0: AR816x revision : 0x2 >alc0: 11776 Tx FIFO, 12032 Rx FIFO >alc0: Read request size : 512 bytes. >alc0: TLP payload size : 256 bytes. >alc0: MSIX count : 16 >alc0: MSI count : 16 >alc0: attempting to allocate 1 MSI-X vectors (16 supported) >msi: routing MSI-X IRQ 136 to local APIC 6 vector 51 >alc0: using IRQ 136 for MSI-X >alc0: Using 1 MSIX message(s). >miibus0: <MII bus> on alc0 >atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 >atphy0: OUI 0x00c82e, model 0x0007, rev. 9 >atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >alc0: Using defaults for TSO: 65518/35/2048 >alc0: bpf attached >alc0: Ethernet address: 18:db:f2:5a:98:c6 >pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 >pcib0: allocated type 3 (0xdd200000-0xdd3fffff) for rid 20 of pcib6 >pcib6: domain 0 >pcib6: secondary bus 62 >pcib6: subordinate bus 62 >pcib6: memory decode 0xdd200000-0xdd3fffff >pci5: <ACPI PCI bus> on pcib6 >pcib6: allocated bus range (62-62) for rid 0 of pci5 >pci5: domain=0, physical bus=62 >found-> vendor=0x168c, dev=0x003e, revid=0x32 > domain=0, bus=62, slot=0, func=0 > class=02-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=10 > powerspec 3 supports D0 D3 current D0 > MSI supports 8 messages, vector masks > map[10]: type Memory, range 64, base 0xdd200000, size 21, enabled >pcib6: allocated memory range (0xdd200000-0xdd3fffff) for rid 10 of pci0:62:0:0 >pcib6: matched entry for 62.0.INTA >pcib6: slot 0 INTA hardwired to IRQ 17 >pci5: <network> at device 0.0 (no driver attached) >pcib7: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 >pcib0: allocated type 3 (0xdd400000-0xdd4fffff) for rid 20 of pcib7 >pcib7: domain 0 >pcib7: secondary bus 63 >pcib7: subordinate bus 63 >pcib7: memory decode 0xdd400000-0xdd4fffff >pci6: <ACPI PCI bus> on pcib7 >pcib7: allocated bus range (63-63) for rid 0 of pci6 >pci6: domain=0, physical bus=63 >found-> vendor=0x1179, dev=0x0115, revid=0x01 > domain=0, bus=63, slot=0, func=0 > class=01-08-02, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=11 > powerspec 3 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > MSI-X supports 8 messages in map 0x10 > map[10]: type Memory, range 64, base 0xdd400000, size 14, enabled >pcib7: allocated memory range (0xdd400000-0xdd403fff) for rid 10 of pci0:63:0:0 >pcib7: matched entry for 63.0.INTA >pcib7: slot 0 INTA hardwired to IRQ 16 >nvme1: <Generic NVMe Device> mem 0xdd400000-0xdd403fff irq 16 at device 0.0 on pci6 >nvme1: attempting to allocate 5 MSI-X vectors (8 supported) >msi: routing MSI-X IRQ 137 to local APIC 0 vector 53 >msi: routing MSI-X IRQ 138 to local APIC 2 vector 51 >msi: routing MSI-X IRQ 139 to local APIC 4 vector 52 >msi: routing MSI-X IRQ 140 to local APIC 6 vector 52 >msi: routing MSI-X IRQ 141 to local APIC 0 vector 54 >nvme1: using IRQs 137-141 for MSI-X >nvme1: CapLo: 0x2803007f: MQES 127, CQR, AMS WRRwUPC, TO 40 >nvme1: CapHi: 0x00000030: DSTRD 0, NSSRS, CSS 1, MPSMIN 0, MPSMAX 0 >nvme1: Version: 0x00010100: 1.1 >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >pci0: <memory> at device 31.2 (no driver attached) >hdac0: <Intel Kaby Lake HDA Controller> mem 0xdd128000-0xdd12bfff,0xdd100000-0xdd10ffff irq 16 at device 31.3 on pci0 >hdac0: PCI card vendor: 0x1028, device: 0x0778 >hdac0: HDA Driver Revision: 20120126_0002 >hdac0: Config options: on=0x00000000 off=0x00000000 >hdac0: attempting to allocate 1 MSI vectors (1 supported) >msi: routing MSI IRQ 142 to local APIC 2 vector 52 >hdac0: using IRQ 142 for MSI >hdac0: Caps: OSS 9, ISS 7, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256 >pci0: <serial bus, SMBus> at device 31.4 (no driver attached) >acpi_button0: <Power Button> on acpi0 >battery0: <ACPI Control Method Battery> on acpi0 >AcpiOsExecute: task queue not started >acpi_acad0: <AC Adapter> on acpi0 >AcpiOsExecute: task queue not started >acpi_lid0: <Control Method Lid Switch> on acpi0 >psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >atkbd: the current kbd controller command byte 0065 >atkbd: keyboard ID 0x41ab (2) >kbdc: RESET_KBD return code:00fa >kbdc: RESET_KBD status:00aa >kbd0 at atkbd0 >kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000 >ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 4 vector 53 >atkbd0: [GIANT-LOCKED] >psm0: current command byte:0065 >kbdc: TEST_AUX_PORT status:0000 >kbdc: RESET_AUX return code:00fa >kbdc: RESET_AUX status:00aa >kbdc: RESET_AUX ID:0000 >kbdc: RESET_AUX return code:00fa >kbdc: RESET_AUX status:00aa >kbdc: RESET_AUX ID:0000 >psm: status 00 02 64 >psm: status 00 00 64 >psm: status 00 03 64 >psm: status 00 03 64 >psm: data 08 00 00 >psm: status 01 47 18 >psm: status 01 e2 b1 >psm: status d0 01 23 >psm: status 2b 80 44 >psm: status 84 03 00 >psm: status 02 6c 00 >psm: status b1 a2 94 >psm: status 27 5d 22 >psm: status 24 71 40 >psm: status 00 02 64 >psm0: <PS/2 Mouse> irq 12 on atkbdc0 >ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 53 >psm0: [GIANT-LOCKED] >WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. >psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons >psm0: config:00004000, flags:00000008, packet size:6 >psm0: syncmask:c0, syncbits:00 >ACPI: Enabled 8 GPEs in block 00 to 7F >pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 >pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 >pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 >ahc_isa_identify 0: ioport 0xc00 alloc failed >ahc_isa_identify 1: ioport 0x1c00 alloc failed >ahc_isa_identify 2: ioport 0x2c00 alloc failed >ahc_isa_identify 3: ioport 0x3c00 alloc failed >ahc_isa_identify 4: ioport 0x4c00 alloc failed >ahc_isa_identify 5: ioport 0x5c00 alloc failed >ahc_isa_identify 6: ioport 0x6c00 alloc failed >ahc_isa_identify 7: ioport 0x7c00 alloc failed >ahc_isa_identify 8: ioport 0x8c00 alloc failed >ahc_isa_identify 9: ioport 0x9c00 alloc failed >ahc_isa_identify 10: ioport 0xac00 alloc failed >ahc_isa_identify 11: ioport 0xbc00 alloc failed >ahc_isa_identify 12: ioport 0xcc00 alloc failed >ahc_isa_identify 13: ioport 0xdc00 alloc failed >ahc_isa_identify 14: ioport 0xec00 alloc failed >isa_probe_children: disabling PnP devices >atkbdc: atkbdc0 already exists; skipping it >atrtc: atrtc0 already exists; skipping it >attimer: attimer0 already exists; skipping it >sc: sc0 already exists; skipping it >isa_probe_children: probing non-PnP devices >orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xcf7ff pnpid ORM0000 on isa0 >sc0 failed to probe on isa0 >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 >pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 >pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 >pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 >fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 >ppc0: cannot reserve I/O port range >ppc0 failed to probe at irq 7 on isa0 >pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0 >uart0 failed to probe at port 0x3f8 irq 4 on isa0 >pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1 >uart1 failed to probe at port 0x2f8 irq 3 on isa0 >isa_probe_children: probing PnP devices >AcpiOsExecute: task queue not started >AcpiOsExecute: task queue not started >AcpiOsExecute: task queue not started >AcpiOsExecute: task queue not started >AcpiOsExecute: task queue not started >AcpiOsExecute: task queue not started >AcpiOsExecute: task queue not started >AcpiOsExecute: task queue not started >hwpstate_intel0: <Intel Speed Shift> on cpu0 >hwpstate_intel1: <Intel Speed Shift> on cpu1 >hwpstate_intel2: <Intel Speed Shift> on cpu2 >hwpstate_intel3: <Intel Speed Shift> on cpu3 >hwpstate_intel4: <Intel Speed Shift> on cpu4 >hwpstate_intel5: <Intel Speed Shift> on cpu5 >hwpstate_intel6: <Intel Speed Shift> on cpu6 >hwpstate_intel7: <Intel Speed Shift> on cpu7 >Device configuration finished. >procfs registered >Statistical TSC calibration took 18213 us and 4045 data points >Timecounter "TSC-low" frequency 1451997196 Hz quality -100 >Statistical lapic calibration took 25670 us and 5703 data points >lapic: Divisor 2, Frequency 11999993 Hz >lapic: deadline tsc mode, Frequency 2903994392 Hz >Timecounters tick every 1.000 msec >ZFS filesystem version: 5 >ZFS storage pool version: features support (5000) >vlan: initialized, using hash tables with chaining >lo0: bpf attached >crypto: <crypto device> >IPsec: Initialized Security Association Processing. >[nl_generic] genl_register_family: Registered family nlctrl id 16 >[nl_generic] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl >tcp_init: net.inet.tcp.tcbhashsize auto tuned to 262144 >AcpiOsExecute: enqueue 10 pending tasks >battery0: battery enitialization start >acpi_acad0: acline initialization start >ahcich2: AHCI reset... >ugen0.1: <Intel XHCI root HUB> at usbus0 >ahcich2: SATA offline status=00000004 >ahcich2: AHCI reset: device not found >ahcich3: AHCI reset... >battery0: rev = 0000 >acpi_acad0: On Line >battery0: units = 0 >battery0: dcap = 0 >battery0: lfcap = 0 >battery0: btech = 0 >battery0: dvol = 0 >battery0: wcap = 0 >battery0: lcap = 0 >battery0: cycles = 0 >hdacc0: <Realtek ALC298 HDA CODEC>battery0: accuracy = 0 >battery0: stmax = 0 >battery0: stmin = 0 >ahcich3: SATA connect time=100us status=00000133 >battery0: aimax = 0 >battery0: aimin = 0 >battery0: gra1 = 0 >battery0: gra2 = 0 >battery0: battery initialization done, tried 1 times >acpi_acad0: acline initialization done, tried 1 times > at cad 0 on hdac0 >ahcich3: AHCI reset: device found >battery0: rev = 0000 >battery0: units = 1 >hdaa0: <Realtek ALC298 Audio Function Group>battery0: dcap = 8684 >battery0: lfcap = 8472 >battery0: btech = 1 >battery0: dvol = 11400 >battery0: wcap = 840 >battery0: lcap = 252 >battery0: cycles = 0 >battery0: accuracy = 0 >battery0: stmax = 0 >battery0: stmin = 0 >battery0: aimax = 0 >battery0: aimin = 0 >battery0: gra1 = 264 >battery0: gra2 = 3780 > at nid 1 on hdacc0 >hdaa0: Subsystem ID: 0x10280778 >hdaa0: NumGPIO=8 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1 >hdaa0: GPIO0: disabled >hdaa0: GPIO1: disabled >hdaa0: GPIO2: disabled >hdaa0: GPIO3: disabled >hdaa0: GPIO4: disabled >hdaa0: GPIO5: disabled >hdaa0: GPIO6: disabled >hdaa0: GPIO7: disabled >hdaa0: Original pins configuration: >hdaa0: nid 0x as seq device conn jack loc color misc >hdaa0: 18 b7a60140 4 0 Mic Fixed Digital Lid-In Unknown 1 >hdaa0: 19 400c0000 0 0 Line-out None 0xc 0x00 Unknown 0 >hdaa0: 20 411111f0 15 0 Speaker None 1/8 Rear Black 1 >hdaa0: 23 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 >hdaa0: 24 411111f0 15 0 Speaker None 1/8 Rear Black 1 >hdaa0: 25 411111f0 15 0 Speaker None 1/8 Rear Black 1 >hdaa0: 26 03a11030 3 0 Mic Jack 1/8 Left Black 0 >hdaa0: 29 4076832d 2 13 Modem-handset None Digital 0x00 Purple 3 >hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 >hdaa0: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1 >hdaa0: 33 03211020 2 0 Headphones Jack 1/8 Left Black 0 >hdaa0: Patching widget caps nid=29 0x00400400 -> 0x00700400 >hdaa0: Patched pins configuration: >hdaa0: nid 0x as seq device conn jack loc color misc >hdaa0: 18 b7a60140 4 0 Mic Fixed Digital Lid-In Unknown 1 >hdaa0: 19 400c0000 0 0 Line-out None 0xc 0x00 Unknown 0 DISA >hdaa0: 20 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA >hdaa0: 23 90170110 1 0 Speaker Fixed Analog Internal Unknown 1 >hdaa0: 24 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA >hdaa0: 25 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA >hdaa0: 26 03a11030 3 0 Mic Jack 1/8 Left Black 0 >hdaa0: 30 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA >hdaa0: 31 411111f0 15 0 Speaker None 1/8 Rear Black 1 DISA >hdaa0: 33 03211020 2 0 Headphones Jack 1/8 Left Black 0 >hdaa0: 4 associations found: >hdaa0: Association 0 (1) out: >hdaa0: Pin nid=23 seq=0 >hdaa0: Association 1 (2) out: >hdaa0: Pin nid=33 seq=0 >hdaa0: Association 2 (3) in: >hdaa0: Pin nid=26 seq=0 >hdaa0: Association 3 (4) in: >hdaa0: Pin nid=18 seq=0 >hdaa0: Tracing association 0 (1) >hdaa0: Pin 23 traced to DAC 2 >hdaa0: Association 0 (1) trace succeeded >hdaa0: Tracing association 1 (2) >hdaa0: Pin 33 traced to DAC 3 >hdaa0: Association 1 (2) trace succeeded >hdaa0: Tracing association 2 (3) >hdaa0: Pin 26 traced to ADC 8 >hdaa0: Association 2 (3) trace succeeded >hdaa0: Tracing association 3 (4) >hdaa0: Pin 18 traced to ADC 9 >hdaa0: Association 3 (4) trace succeeded >hdaa0: Looking for additional DAC for association 0 (1) >hdaa0: Looking for additional DAC for association 1 (2) >hdaa0: Looking for additional ADC for association 2 (3) >hdaa0: Looking for additional ADC for association 3 (4) >hdaa0: Tracing input monitor >hdaa0: Tracing nid 11 to out >hdaa0: nid 11 is input monitor >hdaa0: Tracing other input monitors >hdaa0: Tracing nid 18 to out >hdaa0: Tracing nid 26 to out >hdaa0: Tracing beeper >hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref >pcm0: <Realtek ALC298 (Analog)> at nid 23 and 26 on hdaa0 >pcm0: Playback: >pcm0: Stream cap: 0x00000001 PCM >pcm0: PCM cap: 0x000e0060 16 20 24 bits, 44 48 KHz >pcm0: DAC: 2 >pcm0: >pcm0: nid=23 [pin: Speaker (Fixed)] >pcm0: + <- nid=12 [audio mixer] [src: pcm, mix] >pcm0: + <- nid=2 [audio output] [src: pcm] >pcm0: + <- nid=11 [audio mixer] [src: mix] >pcm0: >pcm0: Record: >pcm0: Stream cap: 0x00000001 PCM >pcm0: PCM cap: 0x000e0060 16 20 24 bits, 44 48 KHz >pcm0: ADC: 8 >pcm0: >pcm0: nid=8 [audio input] >pcm0: + <- nid=35 [audio selector] [src: speaker, mic, mix] >pcm0: + <- nid=26 [pin: Mic (Black Jack)] [src: mic] >pcm0: + <- nid=29 [beep widget] [src: speaker] >pcm0: + <- nid=11 [audio mixer] [src: mix] >pcm0: >pcm0: Input Mix: >pcm0: >pcm0: nid=11 [audio mixer] >pcm0: + <- nid=26 [pin: Mic (Black Jack)] [src: mic] >pcm0: + <- nid=29 [beep widget] [src: speaker] >pcm0: >pcm0: Master Volume (OSS: vol): -63/0dB >pcm0: +- ctl 1 (nid 2 out): -63/0dB (128 steps) >pcm0: +- ctl 9 (nid 12 in 0): mute >pcm0: +- ctl 10 (nid 12 in 1): mute >pcm0: +- ctl 16 (nid 23 in ): mute >pcm0: >pcm0: PCM Volume (OSS: pcm): -63/0dB >pcm0: +- ctl 1 (nid 2 out): -63/0dB (128 steps) >pcm0: +- ctl 9 (nid 12 in 0): mute >pcm0: >pcm0: Microphone Volume (OSS: mic): 0/30dB >pcm0: +- ctl 3 (nid 8 in 0): -33/30dB (128 steps) + mute >pcm0: +- ctl 7 (nid 11 in 2): -34/12dB (32 steps) + mute >pcm0: +- ctl 20 (nid 26 out): 0/30dB (4 steps) >pcm0: >pcm0: Speaker/Beep Volume (OSS: speaker): -33/12dB >pcm0: +- ctl 3 (nid 8 in 0): -33/30dB (128 steps) + mute >pcm0: +- ctl 8 (nid 11 in 3): -34/12dB (32 steps) + mute >pcm0: >pcm0: Recording Level (OSS: rec): -33/30dB >pcm0: +- ctl 3 (nid 8 in 0): -33/30dB (128 steps) + mute >pcm0: >pcm0: Input Mix Level (OSS: mix): -33/30dB >pcm0: +- ctl 3 (nid 8 in 0): -33/30dB (128 steps) + mute >pcm0: +- ctl 10 (nid 12 in 1): mute >pcm0: >pcm0: Input Monitoring Level (OSS: igain): 0/0dB >pcm0: +- ctl 10 (nid 12 in 1): mute >pcm0: >pcm0: Mixer "vol": >pcm0: Mixer "pcm": >pcm0: Mixer "speaker": >pcm0: Mixer "mic": >pcm0: Mixer "mix": >pcm0: Mixer "rec": >pcm0: Mixer "igain": >pcm0: Mixer "ogain": >pcm0: Playback channel set is: Front Left, Front Right, >pcm0: Playback channel matrix is: 2.0 (unknown) >pcm0: Recording channel set is: Front Left, Front Right, >pcm0: Recording channel matrix is: 2.0 (disconnected) >pcm1: <Realtek ALC298 (Analog)> at nid 33 and 18 on hdaa0 >pcm1: Playback: >pcm1: Stream cap: 0x00000001 PCM >pcm1: PCM cap: 0x000e0060 16 20 24 bits, 44 48 KHz >pcm1: DAC: 3 >pcm1: >pcm1: nid=33 [pin: Headphones (Black Jack)] >pcm1: + <- nid=13 [audio mixer] [src: pcm] >pcm1: + <- nid=3 [audio output] [src: pcm] >pcm1: >pcm1: Record: >pcm1: Stream cap: 0x00000001 PCM >pcm1: PCM cap: 0x000e0060 16 20 24 bits, 44 48 KHz >pcm1: ADC: 9 >pcm1: >pcm1: nid=9 [audio input] >pcm1: + <- nid=34 [audio selector] [src: speaker, monitor] >pcm1: + <- nid=29 [beep widget] [src: speaker] >pcm1: + <- nid=18 [pin: Mic (Fixed)] [src: monitor] >pcm1: >pcm1: Master Volume (OSS: vol): -63/0dB >pcm1: +- ctl 2 (nid 3 out): -63/0dB (128 steps) >pcm1: +- ctl 11 (nid 13 in 0): mute >pcm1: +- ctl 21 (nid 33 in ): mute >pcm1: >pcm1: PCM Volume (OSS: pcm): -63/0dB >pcm1: +- ctl 2 (nid 3 out): -63/0dB (128 steps) >pcm1: +- ctl 11 (nid 13 in 0): mute >pcm1: +- ctl 21 (nid 33 in ): mute >pcm1: >pcm1: Microphone2 Volume (OSS: monitor): 0/30dB >pcm1: +- ctl 4 (nid 9 in 0): -33/30dB (128 steps) + mute >pcm1: +- ctl 13 (nid 18 out): 0/30dB (4 steps) >pcm1: >pcm1: Speaker/Beep Volume (OSS: speaker) >pcm1: +- ctl 4 (nid 9 in 0): -33/30dB (128 steps) + mute >pcm1: >pcm1: Recording Level (OSS: rec): -33/30dB >pcm1: +- ctl 4 (nid 9 in 0): -33/30dB (128 steps) + mute >pcm1: +- ctl 13 (nid 18 out): 0/30dB (4 steps) >pcm1: >pcm1: Mixer "vol": >pcm1: Mixer "pcm": >pcm1: Mixer "rec": >pcm1: Mixer "monitor": >pcm1: Playback channel set is: Front Left, Front Right, >pcm1: Playback channel matrix is: 2.0 (disconnected) >pcm1: Automatically set rec source to: monitor >pcm1: Recording channel set is: Front Left, Front Right, >pcm1: Recording channel matrix is: 2.0 (unknown) >hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 >hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 >hdaa1: Subsystem ID: 0x80860101 >hdaa1: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 >hdaa1: Original pins configuration: >hdaa1: nid 0x as seq device conn jack loc color misc >hdaa1: 3 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0 >hdaa1: Patched pins configuration: >hdaa1: nid 0x as seq device conn jack loc color misc >hdaa1: 3 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0 >hdaa1: 1 associations found: >hdaa1: Association 0 (1) out: >hdaa1: Pin nid=3 seq=0 >hdaa1: Tracing association 0 (1) >hdaa1: Pin 3 traced to DAC 2 >hdaa1: Association 0 (1) trace succeeded >hdaa1: Looking for additional DAC for association 0 (1) >hdaa1: Tracing input monitor >hdaa1: Tracing other input monitors >hdaa1: Tracing beeper >hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref >pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 >pcm2: Playback: >pcm2: Stream cap: 0x00000005 AC3 PCM >pcm2: PCM cap: 0x001a07f0 16 24 32 bits, 32 44 48 88 96 176 192 KHz >pcm2: DAC: 2 >pcm2: >pcm2: nid=3 [pin: Digital-out (Jack)] >pcm2: + <- nid=2 [audio output] [src: pcm] >pcm2: >pcm2: Master Volume (OSS: vol): 0/0dB >pcm2: +- ctl 1 (nid 3 in ): mute >pcm2: >pcm2: PCM Volume (OSS: pcm): 0/0dB >pcm2: +- ctl 1 (nid 3 in ): mute >pcm2: >pcm2: Mixer "vol": >pcm2: Mixer "pcm": >pcm2: Soft PCM mixer ENABLED >pcm2: Playback channel matrix is: unknown, assuming 7.1 (disconnected) >pci0: driver added >found-> vendor=0x8086, dev=0x1903, revid=0x05 > domain=0, bus=0, slot=4, func=0 > class=11-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=16 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pci0:0:4:0: reprobing on driver added >found-> vendor=0x8086, dev=0xa131, revid=0x31 > domain=0, bus=0, slot=20, func=2 > class=11-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=18 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pci0:0:20:2: reprobing on driver added >found-> vendor=0x8086, dev=0xa13a, revid=0x31 > domain=0, bus=0, slot=22, func=0 > class=07-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=16 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit >pci0:0:22:0: reprobing on driver added >found-> vendor=0x8086, dev=0xa121, revid=0x31 > domain=0, bus=0, slot=31, func=2 > class=05-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >pci0:0:31:2: reprobing on driver added >found-> vendor=0x8086, dev=0xa123, revid=0x31 > domain=0, bus=0, slot=31, func=4 > class=0c-05-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=16 >pci0:0:31:4: reprobing on driver added >pci1: driver added >pci2: driver added >pci3: driver added >pci4: driver added >pci5: driver added >found-> vendor=0x168c, dev=0x003e, revid=0x32 > domain=0, bus=62, slot=0, func=0 > class=02-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=17 > powerspec 3 supports D0 D3 current D0 > MSI supports 8 messages, vector masks >pci0:62:0:0: reprobing on driver added >pci6: driver added >Trying to mount root from zfs:zroot/ROOT/default []... >WARNING: WITNESS option enabled, expect reduced performance. >uhub0 on usbus0 >uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 >ahcich3: AHCI reset: device ready after 100ms >ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 >ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device >ses0: SEMB SES Device >ada0 at ahcich3 bus 0 scbus1 target 0 lun 0 >ada0: <HGST HTS721010A9E630 JB0OA3W0> ATA8-ACS SATA 3.x device >ada0: Serial Number JR1004D32K4B8M >ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) >ada0: Command Queueing enabled >ada0: 953869MB (1953525168 512 byte sectors) >pass0 at ahcich3 bus 0 scbus1 target 0 lun 0 >pass0: <HGST HTS721010A9E630 JB0OA3W0> ATA8-ACS SATA 3.x device >pass0: Serial Number JR1004D32K4B8M >pass0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) >pass0: Command Queueing enabled >pass1 at ahciem0 bus 0 scbus2 target 0 lun 0 >pass1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device >ses0: ada0,pass0 in 'Slot 03', SATA Slot: scbus1 target 0 >GEOM: new disk ada0 >uhub0: 26 ports with 26 removable, self powered >Root mount waiting for: usbus0 >ugen0.2: <vendor 0x1ea7 2.4G Mouse> at usbus0 >ugen0.3: <Alienware AW1517> at usbus0 >Root mount waiting for: usbus0 >ugen0.4: <vendor 0x0cf3 product 0xe300> at usbus0 >ugen0.5: <CN036P597248768MC0R1A00 IntegratedWebcamFHD> at usbus0 >Root mount waiting for: usbus0 >ugen0.6: <Tobii Technology AB EyeChip> at usbus0 >atrtc0: providing initial system time >start_init: trying /sbin/init >lock order reversal: (sleepable after non-sleepable) > 1st 0xfffff80003e09008 seqflq (seqflq, sleep mutex) @ /usr/src/sys/dev/sound/midi/sequencer.c:757 > 2nd 0xffffffff81ce9a80 midistat lock (midistat lock, sx) @ /usr/src/sys/dev/sound/midi/midi.c:1481 >lock order seqflq -> midistat lock attempted at: >#0 0xffffffff80c5f143 at witness_checkorder+0xbb3 >#1 0xffffffff80bf86f3 at _sx_xlock+0x63 >#2 0xffffffff80984a92 at midimapper_open+0x22 >#3 0xffffffff80987902 at mseq_open+0xf2 >#4 0xffffffff80a78c40 at devfs_open+0x130 >#5 0xffffffff811b24b1 at VOP_OPEN_APV+0x31 >#6 0xffffffff80cf8ee0 at vn_open_vnode+0x1c0 >#7 0xffffffff80cf88d0 at vn_open_cred+0x5c0 >#8 0xffffffff80ceeba3 at kern_openat+0x293 >#9 0xffffffff810e1503 at amd64_syscall+0x143 >#10 0xffffffff810b470b at fast_syscall_common+0xf8 >Linux i386 ELF exec handler installed >Linux i386 vDSO tsc_selector: 3 >Linux i386 vDSO cpu_selector: 2 >nvidia0: <NVIDIA GeForce GTX 1080> on vgapci0 >vgapci0: child nvidia0 requested pci_enable_io >vgapci0: attempting to allocate 1 MSI vectors (1 supported) >msi: routing MSI IRQ 143 to local APIC 0 vector 55 >vgapci0: using IRQ 143 for MSI >vgapci0: child nvidia0 requested pci_enable_io >nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 515.86.01 Wed Oct 26 08:52:34 UTC 2022 >pci0: driver added >found-> vendor=0x8086, dev=0x1903, revid=0x05 > domain=0, bus=0, slot=4, func=0 > class=11-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=16 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pci0:0:4:0: reprobing on driver added >found-> vendor=0x8086, dev=0xa131, revid=0x31 > domain=0, bus=0, slot=20, func=2 > class=11-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=c, irq=18 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pci0:0:20:2: reprobing on driver added >pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xdd136000-0xdd136fff irq 18 at device 20.2 on pci0 >pchtherm0: Catastrophic Power Down Locked Enable >pchtherm0: SMBus report Enable >pchtherm0: SMI on alert Locked Disable >pchtherm0: TSPM: 6<Lock,DTSS0EN> >pchtherm0: MAX Thermal Sensor Shutdown Time 32s >pchtherm0: Throttling 5<Lock,TTEN> >pchtherm0: TL2 flag 2<Lock> >found-> vendor=0x8086, dev=0xa13a, revid=0x31 > domain=0, bus=0, slot=22, func=0 > class=07-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=16 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit >pci0:0:22:0: reprobing on driver added >found-> vendor=0x8086, dev=0xa121, revid=0x31 > domain=0, bus=0, slot=31, func=2 > class=05-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >pci0:0:31:2: reprobing on driver added >found-> vendor=0x8086, dev=0xa123, revid=0x31 > domain=0, bus=0, slot=31, func=4 > class=0c-05-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=16 >pci0:0:31:4: reprobing on driver added >ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xf040-0xf05f mem 0xdd132000-0xdd1320ff irq 16 at device 31.4 on pci0 >ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 2 vector 53 >smbus0: <System Management Bus> on ichsmb0 >pci1: driver added >pci2: driver added >pci3: driver added >pci4: driver added >pci5: driver added >found-> vendor=0x168c, dev=0x003e, revid=0x32 > domain=0, bus=62, slot=0, func=0 > class=02-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=17 > powerspec 3 supports D0 D3 current D0 > MSI supports 8 messages, vector masks >pci0:62:0:0: reprobing on driver added >pci6: driver added >pci0: driver added >found-> vendor=0x8086, dev=0x1903, revid=0x05 > domain=0, bus=0, slot=4, func=0 > class=11-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=16 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message >pci0:0:4:0: reprobing on driver added >found-> vendor=0x8086, dev=0xa13a, revid=0x31 > domain=0, bus=0, slot=22, func=0 > class=07-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=16 > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message, 64 bit >pci0:0:22:0: reprobing on driver added >found-> vendor=0x8086, dev=0xa121, revid=0x31 > domain=0, bus=0, slot=31, func=2 > class=05-80-00, hdrtype=0x00, mfdev=1 > cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) >pci0:0:31:2: reprobing on driver added >pci1: driver added >pci2: driver added >pci3: driver added >pci4: driver added >pci5: driver added >found-> vendor=0x168c, dev=0x003e, revid=0x32 > domain=0, bus=62, slot=0, func=0 > class=02-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=17 > powerspec 3 supports D0 D3 current D0 > MSI supports 8 messages, vector masks >pci0:62:0:0: reprobing on driver added >pci6: driver added >acpi_wmi0: <ACPI-WMI mapping> on acpi0 >acpi_wmi1: <ACPI-WMI mapping> on acpi0 >acpi_wmi1: Embedded MOF found >ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) >acpi_wmi2: <ACPI-WMI mapping> on acpi0 >acpi_wmi2: Embedded MOF found >ACPI: \134_SB.AMW1.WQMF: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) >acpi_wmi3: <ACPI-WMI mapping> on acpi0 >acpi_wmi4: <ACPI-WMI mapping> on acpi0 >Linux x86-64 ELF exec handler installed >Linux x86-64 vDSO tsc_selector: 3 >Linux x86-64 vDSO cpu_selector: 2 >linprocfs registered >linsysfs registered >lo0: link state changed to UP >alc0: link state changed to DOWN >alc0: link state changed to UP >ums0 on uhub0 >ums0: <vendor 0x1ea7 2.4G Mouse, class 0/0, rev 1.10/2.00, addr 1> on usbus0 >ums0: 8 buttons and [XYZT] coordinates ID=2 >uhid0 on uhub0 >uhid0: <Alienware AW1517, class 0/0, rev 0.02/0.00, addr 2> on usbus0 >ubt0 on uhub0 >ubt0: <vendor 0x0cf3 product 0xe300, class 224/1, rev 2.01/0.01, addr 3> on usbus0 >Security policy loaded: MAC/ntpd (mac_ntpd) >ACPI Warning: \134_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20221020/nsarguments-212) >acquiring duplicate lock of same type: "os.lock_mtx" > 1st os.lock_mtx @ nvidia_os.c:865 > 2nd os.lock_mtx @ nvidia_os.c:865 >stack backtrace: >#0 0xffffffff80c5f585 at witness_debugger+0x65 >#1 0xffffffff80bc7dd4 at __mtx_lock_flags+0x94 >#2 0xffffffff83bea17b at os_acquire_spinlock+0x1b >#3 0xffffffff8393e58c at _nv034995rm+0xc >acquiring duplicate lock of same type: "os.lock_sx" > 1st os.lock_sx @ nvidia_os.c:628 > 2nd os.lock_sx @ nvidia_os.c:628 >stack backtrace: >#0 0xffffffff80c5f585 at witness_debugger+0x65 >#1 0xffffffff80bf86f3 at _sx_xlock+0x63 >#2 0xffffffff83be9c52 at os_acquire_mutex+0x32 >#3 0xffffffff8393e60c at _nv034972rm+0xc >acquiring duplicate lock of same type: "fops_sx" > 1st fops_sx @ nvidia_subr.c:399 > 2nd fops_sx @ nvidia_subr.c:1053 >stack backtrace: >#0 0xffffffff80c5f585 at witness_debugger+0x65 >#1 0xffffffff80bf86f3 at _sx_xlock+0x63 >#2 0xffffffff83bed9ff at nv_add_mapping_context_to_file+0x7f >#3 0xffffffff83b28596 at _nv035771rm+0x536
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 270409
:
241246
| 241247