FreeBSD Bugzilla – Attachment 246788 Details for
Bug 272325
Page fault, possible ZFS related
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
smart-hdd1
smart-hdd1 (text/plain), 5.10 KB, created by
bsd_orsolic
on 2023-12-04 22:42:14 UTC
(
hide
)
Description:
smart-hdd1
Filename:
MIME Type:
Creator:
bsd_orsolic
Created:
2023-12-04 22:42:14 UTC
Size:
5.10 KB
patch
obsolete
>smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build) >Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org > >=== START OF INFORMATION SECTION === >Device Model: TOSHIBA MG08ADA800E >Serial Number: Y120A034FCXH >LU WWN Device Id: 5 000039 b48c858ae >Firmware Version: 0101 >User Capacity: 8,001,563,222,016 bytes [8.00 TB] >Sector Sizes: 512 bytes logical, 4096 bytes physical >Rotation Rate: 7200 rpm >Form Factor: 3.5 inches >Device is: Not in smartctl database 7.3/5528 >ATA Version is: ACS-3 T13/2161-D revision 5 >SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) >Local Time is: Mon Dec 4 23:33:25 2023 CET >SMART support is: Available - device has SMART capability. >SMART support is: Enabled > >=== START OF READ SMART DATA SECTION === >SMART overall-health self-assessment test result: PASSED > >General SMART Values: >Offline data collection status: (0x82) Offline data collection activity > was completed without error. > Auto Offline Data Collection: Enabled. >Self-test execution status: ( 0) The previous self-test routine completed > without error or no self-test has ever > been run. >Total time to complete Offline >data collection: ( 120) seconds. >Offline data collection >capabilities: (0x5b) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. >SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. >Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. >Short self-test routine >recommended polling time: ( 2) minutes. >Extended self-test routine >recommended polling time: ( 674) minutes. >SCT capabilities: (0x003d) SCT Status supported. > SCT Error Recovery Control supported. > SCT Feature Control supported. > SCT Data Table supported. > >SMART Attributes Data Structure revision number: 16 >Vendor Specific SMART Attributes with Thresholds: >ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 > 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 > 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 6171 > 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 54 > 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 > 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 > 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 > 9 Power_On_Hours 0x0032 064 064 000 Old_age Always - 14777 > 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 54 >191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 >192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 30 >193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5420 >194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 30 (Min/Max 17/47) >196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 >197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 >198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 >199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 >220 Disk_Shift 0x0002 100 100 000 Old_age Always - 118358025 >222 Loaded_Hours 0x0032 077 077 000 Old_age Always - 9537 >223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 >224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 >226 Load-in_Time 0x0026 100 100 000 Old_age Always - 517 >240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 > >SMART Error Log Version: 1 >No Errors Logged > >SMART Self-test log structure revision number 1 >No self-tests have been logged. [To run self-tests, use: smartctl -t] > >SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing >Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. >If Selective self-test is pending on power-up, resume after 0 minute delay. > >The above only provides legacy SMART information - try 'smartctl -x' for more >
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 272325
:
243120
|
243121
|
243122
|
243123
|
243515
|
244082
|
244545
|
244815
|
246786
|
246787
| 246788