Attachment 256370 Details for Bug 283815 – /var/run/dmesg.boot (verbose)

/var/run/dmesg.boot (verbose)

dmesg.boot (text/plain), 83.42 KB, created by Anton Saietskii on 2025-01-03 13:09:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Anton Saietskii

Created: 2025-01-03 13:09:38 UTC

Size: 83.42 KB

patch

obsolete

>---<<BOOT>>---
>APIC: Using the MADT enumerator.
>Copyright (c) 1992-2023 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 14.2-RELEASE releng/14.2-n269507-57f0f6edef3 JNB amd64
>FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67)
>PPIM 0: PA=0x80000000, VA=0xffffffff82810000, size=0x7e9000, mode=0x1
>pmap: large map 8 PML4 slots (4096 GB)
>VT(efifb): resolution 1920x1080
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff821b0000.
>Preloaded hostuuid "/etc/hostid" at 0xffffffff821ba348.
>Preloaded cpu_microcode "/boot/firmware/intel-ucode.bin" at 0xffffffff821ba398.
>Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff821ba3f8.
>Preloaded TSLOG data "TSLOG" at 0xffffffff821ba450.
>CPU microcode: updated from 0xf6 to 0xf8
>CPU: Intel(R) Core(TM) i7-7820HQ CPU @ 2.90GHz (2900.00-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0x906e9  Family=0x6  Model=0x9e  Stepping=9
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>  AMD Features2=0x121<LAHF,ABM,Prefetch>
>  Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
>  Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
>  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>  IA32_ARCH_CAPS=0xa000c04<RSBA>
>  VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
>        Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
>        Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
>        Secondary Processor Controls=0x5ffcff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,VMCS,EPT#VE,XSAVES>
>        Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
>        Entry Controls=0xda0400
>        EPT Features=0x6734141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
>        VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
>  TSC: P-state invariant, performance statistics
>Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries
>Data TLB: 4 KB pages, 4-way set associative, 64 entries
>Instruction TLB: 2M/4M pages, fully associative, 8 entries
>Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
>64-Byte prefetching
>Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries
>L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
>real memory  = 68719476736 (65536 MB)
>Physical memory chunk(s):
>0x0000000000010000 - 0x0000000000057fff, 294912 bytes (72 pages)
>0x0000000000059000 - 0x000000000009dfff, 282624 bytes (69 pages)
>0x0000000000100000 - 0x000000005cdfffff, 1557135360 bytes (380160 pages)
>0x000000005f01d000 - 0x0000000066edefff, 132915200 bytes (32450 pages)
>0x0000000066ee1000 - 0x0000000076ca0fff, 266076160 bytes (64960 pages)
>0x00000000795ff000 - 0x00000000795fffff, 4096 bytes (1 pages)
>0x0000000100000000 - 0x00000001547c0fff, 1417416704 bytes (346049 pages)
>0x00000001547c2000 - 0x0000000154d9efff, 6148096 bytes (1501 pages)
>0x0000000154da0000 - 0x0000000154db1fff, 73728 bytes (18 pages)
>0x0000000154db3000 - 0x0000000154eadfff, 1028096 bytes (251 pages)
>0x0000000154eaf000 - 0x0000000155172fff, 2899968 bytes (708 pages)
>0x0000000155174000 - 0x0000000155475fff, 3153920 bytes (770 pages)
>0x0000000155477000 - 0x00000001555d7fff, 1445888 bytes (353 pages)
>0x00000001555d9000 - 0x0000000190b56fff, 995614720 bytes (243070 pages)
>0x0000000190b58000 - 0x00000001f75a6fff, 1722085376 bytes (420431 pages)
>0x00000001f75a8000 - 0x00000002f5360fff, 4259024896 bytes (1039801 pages)
>0x00000002f5362000 - 0x0000000332efffff, 1035591680 bytes (252830 pages)
>0x0000000332f01000 - 0x0000000347159fff, 338006016 bytes (82521 pages)
>0x000000034715b000 - 0x000000034745efff, 3162112 bytes (772 pages)
>0x0000000347460000 - 0x0000000347dbdfff, 9822208 bytes (2398 pages)
>0x0000000347dbf000 - 0x000000037b7c0fff, 866131968 bytes (211458 pages)
>0x000000037b7c2000 - 0x0000000386e57fff, 191455232 bytes (46742 pages)
>0x0000000386e59000 - 0x00000003d7899fff, 1352929280 bytes (330305 pages)
>0x00000003d789b000 - 0x0000000536341fff, 5883195392 bytes (1436327 pages)
>0x0000000536343000 - 0x0000000536ea6fff, 11943936 bytes (2916 pages)
>0x0000000536ea8000 - 0x000000053754ffff, 6979584 bytes (1704 pages)
>0x0000000537551000 - 0x000000053757afff, 172032 bytes (42 pages)
>0x000000053757e000 - 0x00000006e8ad7fff, 7270146048 bytes (1774938 pages)
>0x0000000726000000 - 0x0000000726067fff, 425984 bytes (104 pages)
>0x0000000726268000 - 0x0000000726573fff, 3194880 bytes (780 pages)
>0x0000000726575000 - 0x000000072723ffff, 13414400 bytes (3275 pages)
>0x0000000727241000 - 0x0000000736070fff, 249757696 bytes (60976 pages)
>0x0000000736072000 - 0x00000007f5d77fff, 3218104320 bytes (785670 pages)
>0x00000007f5d79000 - 0x000000091576bfff, 4825493504 bytes (1178099 pages)
>0x000000091576d000 - 0x0000000915b0afff, 3792896 bytes (926 pages)
>0x0000000915b0c000 - 0x0000000916834fff, 13799424 bytes (3369 pages)
>0x0000000916836000 - 0x000000091683efff, 36864 bytes (9 pages)
>0x0000000916840000 - 0x000000092542bfff, 247382016 bytes (60396 pages)
>0x000000092542d000 - 0x0000000ad6dfffff, 7274835968 bytes (1776083 pages)
>0x0000000b05200000 - 0x0000000b0534afff, 1355776 bytes (331 pages)
>0x0000000b0534c000 - 0x0000000b05457fff, 1097728 bytes (268 pages)
>0x0000000b05459000 - 0x0000000b065d3fff, 18329600 bytes (4475 pages)
>0x0000000b065d5000 - 0x0000000b58f89fff, 1385910272 bytes (338357 pages)
>0x0000000b58f8b000 - 0x0000000cf5ba5fff, 6924906496 bytes (1690651 pages)
>0x0000000cf5ba7000 - 0x0000000cf5ed3fff, 3330048 bytes (813 pages)
>0x0000000cf5ed5000 - 0x0000000cf5fa5fff, 856064 bytes (209 pages)
>0x0000000cf5fa7000 - 0x0000000cf63c4fff, 4317184 bytes (1054 pages)
>0x0000000cf63c6000 - 0x0000000dc545afff, 3473494016 bytes (848021 pages)
>0x0000000dc545c000 - 0x0000000ee4fa0fff, 4826877952 bytes (1178437 pages)
>0x0000000ee4fa2000 - 0x0000000ee4fe8fff, 290816 bytes (71 pages)
>0x0000000ee4fea000 - 0x0000000ee4fecfff, 12288 bytes (3 pages)
>0x0000000ee4fef000 - 0x0000000ee5d1efff, 13828096 bytes (3376 pages)
>0x0000000ee5d20000 - 0x0000000ef53c8fff, 258641920 bytes (63145 pages)
>0x0000000ef53ca000 - 0x000000107e7e7fff, 6597763072 bytes (1610782 pages)
>avail memory = 66640650240 (63553 MB)
>intel stolen mem: base 0x7b800000 size 64 MB
>MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
>SMP: Added CPU 2 (AP)
>MADT: Found CPU APIC ID 4 ACPI ID 3: enabled
>SMP: Added CPU 4 (AP)
>MADT: Found CPU APIC ID 6 ACPI ID 4: enabled
>SMP: Added CPU 6 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 5: enabled
>SMP: Added CPU 1 (AP)
>MADT: Found CPU APIC ID 3 ACPI ID 6: enabled
>SMP: Added CPU 3 (AP)
>MADT: Found CPU APIC ID 5 ACPI ID 7: enabled
>SMP: Added CPU 5 (AP)
>MADT: Found CPU APIC ID 7 ACPI ID 8: enabled
>SMP: Added CPU 7 (AP)
>Event timer "LAPIC" quality 600
>ACPI APIC Table: <DELL   CBX3   >
>Package ID shift: 4
>L3 cache ID shift: 4
>L2 cache ID shift: 1
>L1 cache ID shift: 1
>Core ID shift: 1
>AP boot address 0x59000
>INTR: Adding local APIC 2 as a target
>INTR: Adding local APIC 4 as a target
>INTR: Adding local APIC 6 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
>Package HW ID = 0
>	Core HW ID = 0
>		CPU0 (BSP): APIC ID: 0
>		CPU1 (AP/HT): APIC ID: 1
>	Core HW ID = 1
>		CPU2 (AP): APIC ID: 2
>		CPU3 (AP/HT): APIC ID: 3
>	Core HW ID = 2
>		CPU4 (AP): APIC ID: 4
>		CPU5 (AP/HT): APIC ID: 5
>	Core HW ID = 3
>		CPU6 (AP): APIC ID: 6
>		CPU7 (AP/HT): APIC ID: 7
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 5
>APIC: CPU 2 has ACPI ID 2
>APIC: CPU 3 has ACPI ID 6
>APIC: CPU 4 has ACPI ID 3
>APIC: CPU 5 has ACPI ID 7
>APIC: CPU 6 has ACPI ID 4
>APIC: CPU 7 has ACPI ID 8
>Pentium Pro MTRR support enabled
>x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
>x86bios: SSEG 0x059000-0x059fff at 0xfffffe006b7d0000
>x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
>random: registering fast source Intel Secure Key RNG
>random: fast provider: "Intel Secure Key RNG"
>random: read 4096 bytes from preloaded cache
>random: no platform bootloader entropy
>random: unblocking device.
>hostuuid: using 20f23f37-d21d-b211-8000-d2db506dbbe1
>ULE: setup cpu 0
>ULE: setup cpu 1
>ULE: setup cpu 2
>ULE: setup cpu 3
>ULE: setup cpu 4
>ULE: setup cpu 5
>ULE: setup cpu 6
>ULE: setup cpu 7
>ACPI: RSDP 0x000000007846D000 000024 (v02 DELL  )
>ACPI: XSDT 0x000000007846D0C8 000114 (v01 DELL   CBX3     01072009 AMI  00010013)
>ACPI: FACP 0x0000000078496740 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
>ACPI: DSDT 0x000000007846D270 0294CE (v02 DELL   CBX3     01072009 INTL 20160422)
>ACPI: FACS 0x0000000078E1CE80 000040
>ACPI: APIC 0x0000000078496850 0000BC (v03 DELL   CBX3     01072009 AMI  00010013)
>ACPI: FPDT 0x0000000078496910 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
>ACPI: FIDT 0x0000000078496958 0000AC (v01 DELL   CBX3     01072009 AMI  00010013)
>ACPI: MCFG 0x0000000078496A08 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
>ACPI: HPET 0x0000000078496A48 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
>ACPI: SSDT 0x0000000078496A80 000644 (v01 SataRe SataTabl 00001000 INTL 20160422)
>ACPI: SSDT 0x00000000784970C8 0012FE (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
>ACPI: SSDT 0x00000000784983C8 002AD6 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
>ACPI: HPET 0x000000007849AEA0 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
>ACPI: SSDT 0x000000007849AED8 000BA3 (v02 INTEL  xh_rvp11 00000000 INTL 20160422)
>ACPI: UEFI 0x000000007849BA80 000042 (v01                 00000000      00000000)
>ACPI: SSDT 0x000000007849BAC8 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
>ACPI: LPIT 0x000000007849C9A8 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
>ACPI: WSMT 0x000000007849CA40 000028 (v01 DELL   CBX3     00000000 MSFT 0000005F)
>ACPI: SSDT 0x000000007849CA68 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
>ACPI: SSDT 0x000000007849CBB0 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
>ACPI: SSDT 0x000000007849CE50 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
>ACPI: SSDT 0x000000007849FE58 000517 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
>ACPI: DBGP 0x00000000784A0370 000034 (v01 INTEL           00000002 MSFT 0000005F)
>ACPI: DBG2 0x00000000784A03A8 000054 (v00 INTEL           00000002 MSFT 0000005F)
>ACPI: SSDT 0x00000000784A0400 0007AC (v02 INTEL  UsbCTabl 00001000 INTL 20160422)
>ACPI: SSDT 0x00000000784A0BB0 005394 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
>ACPI: MSDM 0x00000000784A5F48 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
>ACPI: SLIC 0x00000000784A5FA0 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
>ACPI: SSDT 0x00000000784A6118 0000AE (v02 SgRef  SgPeg    00001000 INTL 20160422)
>ACPI: DMAR 0x00000000784A61C8 0000F0 (v01 INTEL  KBL      00000001 INTL 00000001)
>ACPI: BGRT 0x00000000784A62B8 000038 (v00 ???z            01072009 AMI  00010013)
>ACPI: SSDT 0x00000000784A62F0 001D85 (v01 OptRef OptTabl  00001000 INTL 20160422)
>ACPI: ASF! 0x00000000784A8078 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
>ioapic0: ver 0x20 maxredir 0x77
>ioapic0: Routing external 8259A's -> intpin 0
>lapic0: Routing NMI -> LINT1
>lapic0: LINT1 trigger: edge
>lapic0: LINT1 polarity: high
>lapic2: Routing NMI -> LINT1
>lapic2: LINT1 trigger: edge
>lapic2: LINT1 polarity: high
>lapic4: Routing NMI -> LINT1
>lapic4: LINT1 trigger: edge
>lapic4: LINT1 polarity: high
>lapic6: Routing NMI -> LINT1
>lapic6: LINT1 trigger: edge
>lapic6: LINT1 polarity: high
>lapic1: Routing NMI -> LINT1
>lapic1: LINT1 trigger: edge
>lapic1: LINT1 polarity: high
>lapic3: Routing NMI -> LINT1
>lapic3: LINT1 trigger: edge
>lapic3: LINT1 polarity: high
>lapic5: Routing NMI -> LINT1
>lapic5: LINT1 trigger: edge
>lapic5: LINT1 polarity: high
>lapic7: Routing NMI -> LINT1
>lapic7: LINT1 trigger: edge
>lapic7: LINT1 polarity: high
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>ioapic0 <Version 2.0> irqs 0-119
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x01060015 LDR: 0x00000001 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x00000001   VER: 0x01060015 LDR: 0x00000002 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>SMP: AP CPU #2 Launched!
>cpu2 AP:
>     ID: 0x00000002   VER: 0x01060015 LDR: 0x00000004 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #6 Launched!
>cpu6 AP:
>     ID: 0x00000006   VER: 0x01060015 LDR: 0x00000040 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #4 Launched!
>cpu4 AP:
>     ID: 0x00000004   VER: 0x01060015 LDR: 0x00000010 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #3 Launched!
>cpu3 AP:
>     ID: 0x00000003   VER: 0x01060015 LDR: 0x00000008 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>SMP: AP CPU #7 Launched!
>cpu7 AP:
>     ID: 0x00000007   VER: 0x01060015 LDR: 0x00000080 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>SMP: AP CPU #5 Launched!
>cpu5 AP:
>     ID: 0x00000005   VER: 0x01060015 LDR: 0x00000020 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>No TSX change made
>SMP: passed TSC synchronization test
>TSC timecounter discards lower 1 bit(s)
>random: entropy device external interface
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>null: <full device, null device, zero device>
>crypto: <crypto core>
>cpuctl: access to MSR registers/cpuid info.
>io: <I/O>
>crypto: assign cryptosoft0 driver id 0, flags 0x6000000
>aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
>crypto: assign aesni0 driver id 1, flags 0xe000000
>acpi0: <DELL CBX3   >
>ACPI: 14 ACPI AML tables successfully acquired and loaded
>PCI: MCFG domain 0 bus 0-127 base @ 0xf0000000
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>acpi0: Power Button (fixed)
>acpi0: wakeup code va 0xfffffe006b7ff000 pa 0x5a000
>cpu0: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF80001C34400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF80001E34800 000672 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
>cpu2: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF80001E35800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800010E9600 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
>cpu4: <ACPI CPU> on acpi0
>cpu6: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>cpu3: <ACPI CPU> on acpi0
>cpu5: <ACPI CPU> on acpi0
>cpu7: <ACPI CPU> on acpi0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>hpet0: vendor 0x8086, rev 0x1, 24000000Hz 64bit, 8 timers, legacy route
>hpet0:  t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
>hpet0:  t1: irqs 0x00f00000 (0), MSI
>hpet0:  t2: irqs 0x00f00800 (0), MSI
>hpet0:  t3: irqs 0x00f01000 (0), MSI
>hpet0:  t4: irqs 0x00000000 (0), MSI
>hpet0:  t5: irqs 0x00000000 (0), MSI
>hpet0:  t6: irqs 0x00000000 (0), MSI
>hpet0:  t7: irqs 0x00000000 (0), MSI
>Timecounter "HPET" frequency 24000000 Hz quality 950
>msi: routing MSI-X IRQ 120 to local APIC 2 vector 48
>msi: routing MSI-X IRQ 121 to local APIC 4 vector 48
>msi: routing MSI-X IRQ 122 to local APIC 6 vector 48
>msi: routing MSI-X IRQ 123 to local APIC 0 vector 49
>msi: routing MSI-X IRQ 124 to local APIC 2 vector 49
>msi: routing MSI-X IRQ 125 to local APIC 4 vector 49
>msi: routing MSI-X IRQ 126 to local APIC 6 vector 49
>msi: routing MSI-X IRQ 127 to local APIC 0 vector 50
>msi: Assigning MSI-X IRQ 120 to local APIC 0 vector 51
>msi: Assigning MSI-X IRQ 121 to local APIC 1 vector 48
>msi: Assigning MSI-X IRQ 122 to local APIC 2 vector 48
>msi: Assigning MSI-X IRQ 123 to local APIC 3 vector 48
>msi: Assigning MSI-X IRQ 124 to local APIC 4 vector 48
>msi: Assigning MSI-X IRQ 125 to local APIC 5 vector 48
>msi: Assigning MSI-X IRQ 127 to local APIC 7 vector 48
>Event timer "HPET" frequency 24000000 Hz quality 550
>atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
>atrtc0: Warning: Couldn't map I/O.
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 2 vector 49
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
>Event timer "RTC" frequency 32768 Hz quality 0
>attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 4 vector 49
>Event timer "i8254" frequency 1193182 Hz quality 100
>ACPI timer: -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
>acpi_ec0: <Embedded Controller: GPE 0x14> port 0x930,0x934 on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   10   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 10 11 12 14 15
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 5 range 0-0x7e
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0xc0000-0xc3fff
>pcib0: decoding 3 range 0xc4000-0xc7fff
>pcib0: decoding 3 range 0xc8000-0xcbfff
>pcib0: decoding 3 range 0xcc000-0xcffff
>pcib0: decoding 3 range 0xd0000-0xd3fff
>pcib0: decoding 3 range 0xd4000-0xd7fff
>pcib0: decoding 3 range 0xd8000-0xdbfff
>pcib0: decoding 3 range 0xdc000-0xdffff
>pcib0: decoding 3 range 0x7f800000-0xefffffff
>pcib0: decoding 3 range 0xfd000000-0xfe7fffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x8086, dev=0x5910, revid=0x05
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x1901, revid=0x05
>	domain=0, bus=0, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	secbus=1, subbus=1
>found->	vendor=0x8086, dev=0x591b, revid=0x04
>	domain=0, bus=0, slot=2, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xeb000000, size 24, enabled
>pcib0: allocated type 3 (0xeb000000-0xebffffff) for rid 10 of pci0:0:2:0
>	map[18]: type Prefetchable Memory, range 64, base 0x80000000, size 28, enabled
>pcib0: allocated type 3 (0x80000000-0x8fffffff) for rid 18 of pci0:0:2:0
>	map[20]: type I/O Port, range 32, base 0xf000, size  6, enabled
>pcib0: allocated type 4 (0xf000-0xf03f) for rid 20 of pci0:0:2:0
>found->	vendor=0x8086, dev=0x1903, revid=0x05
>	domain=0, bus=0, slot=4, func=0
>	class=11-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xed410000, size 15, memory disabled
>pcib0: allocated type 3 (0xed410000-0xed417fff) for rid 10 of pci0:0:4:0
>found->	vendor=0x8086, dev=0xa12f, revid=0x31
>	domain=0, bus=0, slot=20, func=0
>	class=0c-03-30, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 8 messages, 64 bit
>	map[10]: type Memory, range 64, base 0xed400000, size 16, enabled
>pcib0: allocated type 3 (0xed400000-0xed40ffff) for rid 10 of pci0:0:20:0
>found->	vendor=0x8086, dev=0xa131, revid=0x31
>	domain=0, bus=0, slot=20, func=2
>	class=11-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xed424000, size 12, enabled
>pcib0: allocated type 3 (0xed424000-0xed424fff) for rid 10 of pci0:0:20:2
>pci0:0:21:0: Transition from D3 to D0
>found->	vendor=0x8086, dev=0xa160, revid=0x31
>	domain=0, bus=0, slot=21, func=0
>	class=11-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	map[10]: type Memory, range 64, base 0xed423000, size 12, memory disabled
>pcib0: allocated type 3 (0xed423000-0xed423fff) for rid 10 of pci0:0:21:0
>pci0:0:21:1: Transition from D3 to D0
>found->	vendor=0x8086, dev=0xa161, revid=0x31
>	domain=0, bus=0, slot=21, func=1
>	class=11-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=255
>	powerspec 3  supports D0 D3  current D0
>	map[10]: type Memory, range 64, base 0xed422000, size 12, memory disabled
>pcib0: allocated type 3 (0xed422000-0xed422fff) for rid 10 of pci0:0:21:1
>found->	vendor=0x8086, dev=0xa13a, revid=0x31
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xed421000, size 12, memory disabled
>pcib0: allocated type 3 (0xed421000-0xed421fff) for rid 10 of pci0:0:22:0
>found->	vendor=0x8086, dev=0xa102, revid=0x31
>	domain=0, bus=0, slot=23, func=0
>	class=01-06-01, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 32, base 0xed41c000, size 13, enabled
>pcib0: allocated type 3 (0xed41c000-0xed41dfff) for rid 10 of pci0:0:23:0
>	map[14]: type Memory, range 32, base 0xed420000, size  8, enabled
>pcib0: allocated type 3 (0xed420000-0xed4200ff) for rid 14 of pci0:0:23:0
>	map[18]: type I/O Port, range 32, base 0xf090, size  3, enabled
>pcib0: allocated type 4 (0xf090-0xf097) for rid 18 of pci0:0:23:0
>	map[1c]: type I/O Port, range 32, base 0xf080, size  2, enabled
>pcib0: allocated type 4 (0xf080-0xf083) for rid 1c of pci0:0:23:0
>	map[20]: type I/O Port, range 32, base 0xf060, size  5, enabled
>pcib0: allocated type 4 (0xf060-0xf07f) for rid 20 of pci0:0:23:0
>	map[24]: type Memory, range 32, base 0xed41f000, size 11, enabled
>pcib0: allocated type 3 (0xed41f000-0xed41f7ff) for rid 24 of pci0:0:23:0
>found->	vendor=0x8086, dev=0xa167, revid=0xf1
>	domain=0, bus=0, slot=27, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	secbus=2, subbus=2
>found->	vendor=0x8086, dev=0xa111, revid=0xf1
>	domain=0, bus=0, slot=28, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	secbus=3, subbus=3
>found->	vendor=0x8086, dev=0xa114, revid=0xf1
>	domain=0, bus=0, slot=28, func=4
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	secbus=4, subbus=60
>found->	vendor=0x8086, dev=0xa118, revid=0xf1
>	domain=0, bus=0, slot=29, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	secbus=61, subbus=61
>found->	vendor=0x8086, dev=0xa154, revid=0x31
>	domain=0, bus=0, slot=31, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0xa121, revid=0x31
>	domain=0, bus=0, slot=31, func=2
>	class=05-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	map[10]: type Memory, range 32, base 0xed418000, size 14, memory disabled
>pcib0: allocated type 3 (0xed418000-0xed41bfff) for rid 10 of pci0:0:31:2
>found->	vendor=0x8086, dev=0xa123, revid=0x31
>	domain=0, bus=0, slot=31, func=4
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	map[10]: type Memory, range 64, base 0xed41e000, size  8, enabled
>pcib0: allocated type 3 (0xed41e000-0xed41e0ff) for rid 10 of pci0:0:31:4
>	map[20]: type I/O Port, range 32, base 0xf040, size  5, enabled
>pcib0: allocated type 4 (0xf040-0xf05f) for rid 20 of pci0:0:31:4
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib1
>pcib0: allocated type 3 (0xec000000-0xed0fffff) for rid 20 of pcib1
>pcib0: allocated type 3 (0xc0000000-0xd1ffffff) for rid 24 of pcib1
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0xe000-0xefff
>pcib1:   memory decode     0xec000000-0xed0fffff
>pcib1:   prefetched decode 0xc0000000-0xd1ffffff
>pci1: <ACPI PCI bus> on pcib1
>pcib1: allocated bus range (1-1) for rid 0 of pci1
>pci1: domain=0, physical bus=1
>found->	vendor=0x10de, dev=0x1bb7, revid=0xa1
>	domain=0, bus=1, slot=0, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 32, base 0xec000000, size 24, enabled
>pcib1: allocated memory range (0xec000000-0xecffffff) for rid 10 of pci0:1:0:0
>	map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
>pcib1: allocated prefetch range (0xc0000000-0xcfffffff) for rid 14 of pci0:1:0:0
>	map[1c]: type Prefetchable Memory, range 64, base 0xd0000000, size 25, enabled
>pcib1: allocated prefetch range (0xd0000000-0xd1ffffff) for rid 1c of pci0:1:0:0
>	map[24]: type I/O Port, range 32, base 0xe000, size  7, port disabled
>pcib1: allocated I/O port range (0xe000-0xe07f) for rid 24 of pci0:1:0:0
>vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xec000000-0xecffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0 on pci1
>vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xeb000000-0xebffffff,0x80000000-0x8fffffff at device 2.0 on pci0
>vgapci1: Boot video device
>pci0: <dasp> at device 4.0 (no driver attached)
>pci0:0:4:0: Transition from D0 to D3
>pci0: <serial bus, USB> at device 20.0 (no driver attached)
>pci0:0:20:0: Transition from D0 to D3
>pci0: set ACPI power state D3 on \134_SB_.PCI0.XHC_
>pci0: <dasp> at device 20.2 (no driver attached)
>pci0:0:20:2: Transition from D0 to D3
>pci0: <dasp> at device 21.0 (no driver attached)
>pci0:0:21:0: Transition from D0 to D3
>pci0: set ACPI power state D3 on \134_SB_.PCI0.I2C0
>pci0: <dasp> at device 21.1 (no driver attached)
>pci0:0:21:1: Transition from D0 to D3
>pci0: set ACPI power state D3 on \134_SB_.PCI0.I2C1
>pci0: <simple comms> at device 22.0 (no driver attached)
>pci0:0:22:0: Transition from D0 to D3
>ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xed41c000-0xed41dfff,0xed420000-0xed4200ff,0xed41f000-0xed41f7ff at device 23.0 on pci0
>ahci0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 128 to local APIC 6 vector 48
>ahci0: using IRQ 128 for MSI
>ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
>ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 6Gbps PMD SSC PSC 32cmd EM eSATA 2ports
>ahci0: Caps2: DESO SADM SDS APST
>ahcich0: not probed (disabled)
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich1: Caps: ESP DSP
>ahcich2: not probed (disabled)
>ahcich3: <AHCI channel> at channel 3 on ahci0
>ahcich3: Caps: DSP
>pcib2: <ACPI PCI-PCI bridge> at device 27.0 on pci0
>pcib0: allocated type 3 (0xed300000-0xed3fffff) for rid 20 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   memory decode     0xed300000-0xed3fffff
>pci2: <ACPI PCI bus> on pcib2
>pcib2: allocated bus range (2-2) for rid 0 of pci2
>pci2: domain=0, physical bus=2
>found->	vendor=0x2646, dev=0x5013, revid=0x01
>	domain=0, bus=2, slot=0, func=0
>	class=01-08-02, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 8 messages, 64 bit
>	MSI-X supports 33 messages in map 0x10
>	map[10]: type Memory, range 64, base 0xed300000, size 14, enabled
>pcib2: allocated memory range (0xed300000-0xed303fff) for rid 10 of pci0:2:0:0
>nvme0: <Generic NVMe Device> mem 0xed300000-0xed303fff at device 0.0 on pci2
>nvme0: attempting to allocate 5 MSI-X vectors (33 supported)
>msi: routing MSI-X IRQ 129 to local APIC 0 vector 50
>msi: routing MSI-X IRQ 130 to local APIC 2 vector 49
>msi: routing MSI-X IRQ 131 to local APIC 4 vector 50
>msi: routing MSI-X IRQ 132 to local APIC 6 vector 50
>msi: routing MSI-X IRQ 133 to local APIC 0 vector 52
>nvme0: using IRQs 129-133 for MSI-X
>nvme0: CapLo: 0x3c013fff: MQES 16383, CQR, TO 60
>nvme0: CapHi: 0x00000020: DSTRD 0, CSS 1, CPS 0, MPSMIN 0, MPSMAX 0
>nvme0: Version: 0x00010400: 1.4
>pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
>pcib0: allocated type 3 (0xed200000-0xed2fffff) for rid 20 of pcib3
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   memory decode     0xed200000-0xed2fffff
>pci3: <ACPI PCI bus> on pcib3
>pcib3: allocated bus range (3-3) for rid 0 of pci3
>pci3: domain=0, physical bus=3
>found->	vendor=0x8086, dev=0x2725, revid=0x1a
>	domain=0, bus=3, slot=0, func=0
>	class=02-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	MSI-X supports 16 messages in map 0x10
>	map[10]: type Memory, range 64, base 0xed200000, size 14, memory disabled
>pcib3: allocated memory range (0xed200000-0xed203fff) for rid 10 of pci0:3:0:0
>pci3: <network> at device 0.0 (no driver attached)
>pci0:3:0:0: Transition from D0 to D3
>pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
>pcib0: allocated type 3 (0xd4000000-0xea0fffff) for rid 20 of pcib4
>pcib0: allocated type 3 (0x90000000-0xb1ffffff) for rid 24 of pcib4
>pcib4:   domain            0
>pcib4:   secondary bus     4
>pcib4:   subordinate bus   60
>pcib4:   memory decode     0xd4000000-0xea0fffff
>pcib4:   prefetched decode 0x90000000-0xb1ffffff
>pci4: <ACPI PCI bus> on pcib4
>pcib4: allocated bus range (4-4) for rid 0 of pci4
>pci4: domain=0, physical bus=4
>pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0
>pcib0: allocated type 3 (0xed100000-0xed1fffff) for rid 20 of pcib5
>pcib5:   domain            0
>pcib5:   secondary bus     61
>pcib5:   subordinate bus   61
>pcib5:   memory decode     0xed100000-0xed1fffff
>pci5: <ACPI PCI bus> on pcib5
>pcib5: allocated bus range (61-61) for rid 0 of pci5
>pci5: domain=0, physical bus=61
>found->	vendor=0x2646, dev=0x5013, revid=0x01
>	domain=0, bus=61, slot=0, func=0
>	class=01-08-02, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 8 messages, 64 bit
>	MSI-X supports 33 messages in map 0x10
>	map[10]: type Memory, range 64, base 0xed100000, size 14, enabled
>pcib5: allocated memory range (0xed100000-0xed103fff) for rid 10 of pci0:61:0:0
>nvme1: <Generic NVMe Device> mem 0xed100000-0xed103fff at device 0.0 on pci5
>nvme1: attempting to allocate 5 MSI-X vectors (33 supported)
>msi: routing MSI-X IRQ 134 to local APIC 2 vector 50
>msi: routing MSI-X IRQ 135 to local APIC 4 vector 51
>msi: routing MSI-X IRQ 136 to local APIC 6 vector 51
>msi: routing MSI-X IRQ 137 to local APIC 0 vector 53
>msi: routing MSI-X IRQ 138 to local APIC 2 vector 51
>nvme1: using IRQs 134-138 for MSI-X
>nvme1: CapLo: 0x3c013fff: MQES 16383, CQR, TO 60
>nvme1: CapHi: 0x00000020: DSTRD 0, CSS 1, CPS 0, MPSMIN 0, MPSMAX 0
>nvme1: Version: 0x00010400: 1.4
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>pci0: <memory> at device 31.2 (no driver attached)
>pci0: <serial bus, SMBus> at device 31.4 (no driver attached)
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_button0: <Power Button> on acpi0
>acpi_button1: <Sleep Button> on acpi0
>acpi_acad0: <AC Adapter> on acpi0
>AcpiOsExecute: task queue not started
>battery0: <ACPI Control Method Battery> on acpi0
>AcpiOsExecute: task queue not started
>acpi_tz0: <Thermal Zone> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0065
>atkbd: keyboard ID 0x41ab (2)
>kbdc: RESET_KBD return code:00fa
>kbdc: RESET_KBD status:00aa
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 4 vector 52
>atkbd0: [GIANT-LOCKED]
>psm0: unable to allocate IRQ
>psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
>psm0: current command byte:0065
>kbdc: TEST_AUX_PORT status:0000
>kbdc: RESET_AUX return code:00fa
>kbdc: RESET_AUX status:00aa
>kbdc: RESET_AUX ID:0000
>kbdc: RESET_AUX return code:00fa
>kbdc: RESET_AUX status:00aa
>kbdc: RESET_AUX ID:0000
>psm: status 00 64 02
>psm: status 00 64 00
>psm: status 00 64 03
>psm: status 00 64 03
>psm: data 00 00 00
>psm: status 00 14 00
>psm: status 00 14 00
>psm: status 10 64 00
>psm: status 00 02 64
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 52
>psm0: [GIANT-LOCKED]
>WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
>psm0: model GlidePoint, device ID 0-00, 100 buttons
>psm0: config:00004000, flags:00000008, packet size:3
>psm0: syncmask:c0, syncbits:00
>ACPI: Enabled 5 GPEs in block 00 to 7F
>pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc0800-0xc0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc1000-0xc17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc1800-0xc1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc2000-0xc27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc2800-0xc2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc3000-0xc37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc3800-0xc3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc4000-0xc47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc4800-0xc4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc5000-0xc57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc5800-0xc5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc6000-0xc67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc6800-0xc6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc7000-0xc77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc7800-0xc7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc8000-0xc87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc8800-0xc8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc9000-0xc97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xc9800-0xc9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xca000-0xca7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xca800-0xcafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xcb000-0xcb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xcb800-0xcbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xcc000-0xcc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xcc800-0xccfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xcd000-0xcd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xcd800-0xcdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xce000-0xce7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xce800-0xcefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xcf000-0xcf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xcf800-0xcffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xda000-0xda7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xda800-0xdafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdd800-0xddfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xde000-0xde7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xde800-0xdefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xdf800-0xdffff) for rid 0 of orm0
>isa_probe_children: disabling PnP devices
>atkbdc: atkbdc0 already exists; skipping it
>atrtc: atrtc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>sc0 failed to probe on isa0
>isa_probe_children: probing PnP devices
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>coretemp0: <CPU On-Die Thermal Sensors> on cpu0
>coretemp0: Setting TjMax=100
>hwpstate_intel0: <Intel Speed Shift> on cpu0
>coretemp1: <CPU On-Die Thermal Sensors> on cpu1
>coretemp1: Setting TjMax=100
>hwpstate_intel1: <Intel Speed Shift> on cpu1
>coretemp2: <CPU On-Die Thermal Sensors> on cpu2
>coretemp2: Setting TjMax=100
>hwpstate_intel2: <Intel Speed Shift> on cpu2
>coretemp3: <CPU On-Die Thermal Sensors> on cpu3
>coretemp3: Setting TjMax=100
>hwpstate_intel3: <Intel Speed Shift> on cpu3
>coretemp4: <CPU On-Die Thermal Sensors> on cpu4
>coretemp4: Setting TjMax=100
>hwpstate_intel4: <Intel Speed Shift> on cpu4
>coretemp5: <CPU On-Die Thermal Sensors> on cpu5
>coretemp5: Setting TjMax=100
>hwpstate_intel5: <Intel Speed Shift> on cpu5
>coretemp6: <CPU On-Die Thermal Sensors> on cpu6
>coretemp6: Setting TjMax=100
>hwpstate_intel6: <Intel Speed Shift> on cpu6
>coretemp7: <CPU On-Die Thermal Sensors> on cpu7
>coretemp7: Setting TjMax=100
>hwpstate_intel7: <Intel Speed Shift> on cpu7
>Device configuration finished.
>Statistical TSC calibration took 30797 us and 6701 data points
>Timecounter "TSC-low" frequency 1452000080 Hz quality 1000
>Statistical lapic calibration took 8962 us and 33905 data points
>lapic: Divisor 2, Frequency 12000000 Hz
>lapic: deadline tsc mode, Frequency 2904000161 Hz
>Timecounters tick every 1.000 msec
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>lo0: bpf attached
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 524288
>ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
>AcpiOsExecute: enqueue 10 pending tasks
>battery0: battery initialization start
>acpi_acad0: acline initialization start
>acpi_acad0: On Line
>acpi_acad0: acline initialization done, tried 1 times
>ahcich1: AHCI reset...
>msi: Assigning MSI-X IRQ 130 to local APIC 1 vector 49
>msi: Assigning MSI-X IRQ 131 to local APIC 3 vector 49
>msi: Assigning MSI-X IRQ 132 to local APIC 5 vector 49
>msi: Assigning MSI-X IRQ 133 to local APIC 7 vector 49
>msi: Assigning MSI-X IRQ 135 to local APIC 0 vector 52
>ahcich1: SATA connect timeout time=10000us status=00000000
>msi: Assigning MSI-X IRQ 136 to local APIC 2 vector 49
>msi: Assigning MSI-X IRQ 137 to local APIC 4 vector 50
>battery0: rev = ffff
>ahcich1: AHCI reset: device not found
>ahcich3: AHCI reset...
>ahcich3: SATA connect time=100us status=00000123
>battery0: units = 0
>battery0: dcap = 0
>battery0: lfcap = 0
>battery0: btech = 0
>battery0: dvol = 0
>battery0: wcap = 0
>battery0: lcap = 0
>battery0: gra1 = 0
>battery0: gra2 = 0
>battery0: battery initialization done, tried 1 times
>msi: Assigning MSI-X IRQ 138 to local APIC 6 vector 50
>ahcich3: AHCI reset: device found
>ahcich3: AHCI reset: device ready after 0ms
>Trying to mount root from zfs:zroot/ROOT/releng142 []...
>nda0 at nvme0 bus 0 scbus2 target 0 lun 1
>nda0: <KINGSTON SFYRD4000G EIFK31.6 50026B76868937F6>
>nda0: Serial Number 50026B76868937F6
>nda0: nvme version 1.4
>nda0: 3815447MB (976754646 4096 byte sectors)
>GEOM: new disk nda0
>nda1 at nvme1 bus 0 scbus3 target 0 lun 1
>nda1: <KINGSTON SFYRD4000G EIFK31.6 50026B76868AFFBD>
>nda1: Serial Number 50026B76868AFFBD
>nda1: nvme version 1.4
>nda1: 3815447MB (976754646 4096 byte sectors)
>ada0 at ahcich3 bus 0 scbus1 target 0 lun 0
>ada0: <Samsung SSD 870 QVO 8TB SVQ02B6Q> ACS-4 ATA SATA 3.x device
>ada0: Serial Number S5SSNF0WC11406J
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
>ada0: Command Queueing enabled
>ada0: 7249341MB (14846650368 512 byte sectors)
>ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
>pass0 at ahcich3 bus 0 scbus1 target 0 lun 0
>pass0: <Samsung SSD 870 QVO 8TB SVQ02B6Q> ACS-4 ATA SATA 3.x device
>pass0: Serial Number S5SSNF0WC11406J
>pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
>pass0: Command Queueing enabled
>pass1 at nvme0 bus 0 scbus2 target 0 lun 1
>pass1: <KINGSTON SFYRD4000G EIFK31.6 50026B76868937F6>
>pass1: Serial Number 50026B76868937F6
>pass1: nvme version 1.4
>pass2 at nvme1 bus 0 scbus3 target 0 lun 1
>pass2: <KINGSTON SFYRD4000G EIFK31.6 50026B76868AFFBD>
>pass2: Serial Number 50026B76868AFFBD
>pass2: nvme version 1.4
>GEOM: new disk nda1
>GEOM: new disk ada0
>GEOM_ELI: Device nda0p4.eli created.
>GEOM_ELI: Encryption: AES-XTS 256
>GEOM_ELI:     Crypto: accelerated software
>GEOM_MIRROR: Device mirror/esp launched (2/2).
>GEOM_MIRROR: Device mirror/swap launched (2/2).
>GEOM_ELI: Device nda1p4.eli created.
>GEOM_ELI: Encryption: AES-XTS 256
>GEOM_ELI:     Crypto: accelerated software
>atrtc0: providing initial system time
>start_init: trying /sbin/init
>[2] GEOM_ELI: Device diskid/DISK-S5SSNF0WC11406J.eli created.
>[2] GEOM_ELI: Encryption: AES-XTS 256
>[2] GEOM_ELI:     Crypto: accelerated software
>[2] GEOM_ELI: Device mirror/swap.eli created.
>[2] GEOM_ELI: Encryption: AES-XTS 256
>[2] GEOM_ELI:  Integrity: HMAC/SHA512
>[2] GEOM_ELI:     Crypto: software
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 4096 bytes of data at offset 4096.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 4096 bytes of data at offset 0.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 4096 bytes of data at offset 0.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 4096 bytes of data at offset 8589926400.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 8192 bytes of data at offset 65536.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 8192 bytes of data at offset 8192.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 8192 bytes of data at offset 0.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 8192 bytes of data at offset 262144.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 8192 bytes of data at offset 65536.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 8192 bytes of data at offset 8192.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 8192 bytes of data at offset 0.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 8192 bytes of data at offset 262144.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 4096 bytes of data at offset 32768.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 4096 bytes of data at offset 0.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 4096 bytes of data at offset 8192.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 4096 bytes of data at offset 65536.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 4096 bytes of data at offset 0.
>[2] GEOM_ELI: mirror/swap.eli: Failed to authenticate 4096 bytes of data at offset 8589926400.
>[3] lindebugfs registered
>[3] <6>[drm] Got Intel graphics stolen memory base 0x7b800000, size 0x4000000
>[3] drmn1: <drmn> on vgapci1
>[3] vgapci1: child drmn1 requested pci_enable_io
>[3] vgapci1: child drmn1 requested pci_enable_io
>[3] vgapci1: attempting to allocate 1 MSI vectors (1 supported)
>[3] msi: routing MSI IRQ 139 to local APIC 0 vector 53
>[3] vgapci1: using IRQ 139 for MSI
>[3] kbl_dmc_ver1_04.bin: could not load firmware image, error 2
>[3] Trying to load binary firmware from /boot/firmware/kbl_dmc_ver1_04.bin
>[3] kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/kbl_dmc_ver1_04.bin either
>[3] i915/kbl_dmc_ver1_04.bin: could not load firmware image, error 2
>[3] Trying to load binary firmware from /boot/firmware/i915/kbl_dmc_ver1_04.bin
>[3] i915/kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915/kbl_dmc_ver1_04.bin either
>[3] i915_kbl_dmc_ver1_04.bin: could not load firmware image, error 2
>[3] Trying to load binary firmware from /boot/firmware/i915_kbl_dmc_ver1_04.bin
>[3] i915_kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915_kbl_dmc_ver1_04.bin either
>[3] firmware: 'i915_kbl_dmc_ver1_04_bin' version 0: 8840 bytes loaded at 0xffffffff83312000
>[3] drmn1: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin'
>[3] drmn1: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
>[3] drmn1: Adding i2c adapter i915 gmbus dpc
>[3] lkpi_iic0: <LinuxKPI I2C> on drmn1
>[3] iicbus0: <Philips I2C bus> on lkpi_iic0
>[3] iic0: <I2C generic I/O> on iicbus0
>[3] drmn1: Adding i2c adapter i915 gmbus dpb
>[3] lkpi_iic1: <LinuxKPI I2C> on drmn1
>[3] iicbus1: <Philips I2C bus> on lkpi_iic1
>[3] iic1: <I2C generic I/O> on iicbus1
>[3] drmn1: Adding i2c adapter i915 gmbus dpd
>[3] lkpi_iic2: <LinuxKPI I2C> on drmn1
>[3] iicbus2: <Philips I2C bus> on lkpi_iic2
>[3] iic2: <I2C generic I/O> on iicbus2
>[3] [drm] Connector eDP-1: get mode from tunables:
>[3] [drm]  - kern.vt.fb.modes.eDP-1
>[3] [drm]  - kern.vt.fb.default_mode
>[3] [drm] Connector DP-1: get mode from tunables:
>[3] [drm]  - kern.vt.fb.modes.DP-1
>[3] [drm]  - kern.vt.fb.default_mode
>[3] [drm] Connector HDMI-A-1: get mode from tunables:
>[3] [drm]  - kern.vt.fb.modes.HDMI-A-1
>[3] [drm]  - kern.vt.fb.default_mode
>[3] [drm] Connector DP-2: get mode from tunables:
>[3] [drm]  - kern.vt.fb.modes.DP-2
>[3] [drm]  - kern.vt.fb.default_mode
>[3] [drm] Connector HDMI-A-2: get mode from tunables:
>[3] [drm]  - kern.vt.fb.modes.HDMI-A-2
>[3] [drm]  - kern.vt.fb.default_mode
>[3] [drm] Connector DP-3: get mode from tunables:
>[3] [drm]  - kern.vt.fb.modes.DP-3
>[3] [drm]  - kern.vt.fb.default_mode
>[3] [drm] Connector HDMI-A-3: get mode from tunables:
>[3] [drm]  - kern.vt.fb.modes.HDMI-A-3
>[3] [drm]  - kern.vt.fb.default_mode
>[3] drmn1: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
>[3] drmn1: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
>[3] drmn1: [drm] [ENCODER:127:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
>[4] sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
>[4] drm1: Adding i2c adapter AUX A/DDI A/PHY A
>[4] lkpi_iic3: <LinuxKPI I2C> on drm1
>[4] iicbus3: <Philips I2C bus> on lkpi_iic3
>[4] iic3: <I2C generic I/O> on iicbus3
>[4] drm2: Adding i2c adapter AUX B/DDI B/PHY B
>[4] lkpi_iic4: <LinuxKPI I2C> on drm2
>[4] iicbus4: <Philips I2C bus> on lkpi_iic4
>[4] iic4: <I2C generic I/O> on iicbus4
>[4] drm4: Adding i2c adapter AUX C/DDI C/PHY C
>[4] lkpi_iic5: <LinuxKPI I2C> on drm4
>[4] iicbus5: <Philips I2C bus> on lkpi_iic5
>[4] iic5: <I2C generic I/O> on iicbus5
>[4] drm6: Adding i2c adapter AUX D/DDI D/PHY D
>[4] lkpi_iic6: <LinuxKPI I2C> on drm6
>[4] iicbus6: <Philips I2C bus> on lkpi_iic6
>[4] iic6: <I2C generic I/O> on iicbus6
>[4] <6>[drm] Initialized i915 1.6.0 20201103 for drmn1 on minor 0
>[5] VT: Replacing driver "efifb" with new "drmfb".
>[5] start FB_INFO:
>[5] height=1080 width=1920 depth=32
>[5] pbase=0x80000000 vbase=0xfffff80080000000
>[5] name=drmn1 id=i915drmfb flags=0x0 stride=7680
>[5] end FB_INFO
>[5] EFI Runtime entry 117 mapping attributes unsupported
>[5] efirtc0: <EFI Realtime Clock>
>[5] efirtc0: registered as a time-of-day clock, resolution 1.000000s
>[5] pci0: driver added
>[5] found->	vendor=0x8086, dev=0x1903, revid=0x05
>[5] 	domain=0, bus=0, slot=4, func=0
>[5] 	class=11-80-00, hdrtype=0x00, mfdev=0
>[5] 	cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=a, irq=255
>[5] 	powerspec 3  supports D0 D3  current D3
>[5] 	MSI supports 1 message
>[5] pci0:0:4:0: reprobing on driver added
>[5] pci0: set ACPI power state D0 on \134_SB_.PCI0.B0D4
>[5] pci0:0:4:0: Transition from D3 to D0
>[5] pci0:0:4:0: Transition from D0 to D3
>[5] found->	vendor=0x8086, dev=0xa12f, revid=0x31
>[5] 	domain=0, bus=0, slot=20, func=0
>[5] 	class=0c-03-30, hdrtype=0x00, mfdev=1
>[5] 	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=a, irq=255
>[5] 	powerspec 2  supports D0 D3  current D3
>[5] 	MSI supports 8 messages, 64 bit
>[5] pci0:0:20:0: reprobing on driver added
>[5] pci0: set ACPI power state D0 on \134_SB_.PCI0.XHC_
>[5] xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xed400000-0xed40ffff at device 20.0 on pci0
>[5] xhci0: 32 bytes context size, 64-bit DMA
>[5] xhci0: attempting to allocate 1 MSI vectors (8 supported)
>[5] msi: routing MSI IRQ 140 to local APIC 2 vector 51
>[5] xhci0: using IRQ 140 for MSI
>[5] xhci0: MSI enabled
>[5] usbus0 on xhci0
>[5] xhci0: usbpf: Attached
>[5] found->	vendor=0x8086, dev=0xa131, revid=0x31
>[5] usbus0: 5.0Gbps Super Speed USB v3.0
>[5] 	domain=0, bus=0, slot=20, func=2
>[5] 	class=11-80-00, hdrtype=0x00, mfdev=0
>[5] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=c, irq=255
>[5] 	powerspec 3  supports D0 D3  current D3
>[5] 	MSI supports 1 message
>[5] pci0:0:20:2: reprobing on driver added
>[5] pci0:0:20:2: Transition from D3 to D0
>[5] pci0:0:20:2: Transition from D0 to D3
>[5] found->	vendor=0x8086, dev=0xa160, revid=0x31
>[5] 	domain=0, bus=0, slot=21, func=0
>[5] 	class=11-80-00, hdrtype=0x00, mfdev=1
>[5] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=a, irq=255
>[5] 	powerspec 3  supports D0 D3  current D3
>[5] pci0:0:21:0: reprobing on driver added
>[5] pci0: set ACPI power state D0 on \134_SB_.PCI0.I2C0
>[5] pci0:0:21:0: Transition from D0 to D3
>[5] pci0: set ACPI power state D3 on \134_SB_.PCI0.I2C0
>[5] found->	vendor=0x8086, dev=0xa161, revid=0x31
>[5] 	domain=0, bus=0, slot=21, func=1
>[5] 	class=11-80-00, hdrtype=0x00, mfdev=1
>[5] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=b, irq=255
>[5] 	powerspec 3  supports D0 D3  current D3
>[5] pci0:0:21:1: reprobing on driver added
>[5] pci0: set ACPI power state D0 on \134_SB_.PCI0.I2C1
>[5] pci0:0:21:1: Transition from D0 to D3
>[5] pci0: set ACPI power state D3 on \134_SB_.PCI0.I2C1
>[5] found->	vendor=0x8086, dev=0xa13a, revid=0x31
>[5] 	domain=0, bus=0, slot=22, func=0
>[5] 	class=07-80-00, hdrtype=0x00, mfdev=1
>[5] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=a, irq=255
>[5] 	powerspec 3  supports D0 D3  current D3
>[5] 	MSI supports 1 message, 64 bit
>[5] pci0:0:22:0: reprobing on driver added
>[5] pci0: set ACPI power state D0 on \134_SB_.PCI0.HECI
>[5] pci0:0:22:0: Transition from D3 to D0
>[5] pci0:0:22:0: Transition from D0 to D3
>[5] found->	vendor=0x8086, dev=0xa121, revid=0x31
>[5] 	domain=0, bus=0, slot=31, func=2
>[5] 	class=05-80-00, hdrtype=0x00, mfdev=1
>[5] 	cmdreg=0x0002, statreg=0x0000, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] pci0:0:31:2: reprobing on driver added
>[5] found->	vendor=0x8086, dev=0xa123, revid=0x31
>[5] 	domain=0, bus=0, slot=31, func=4
>[5] 	class=0c-05-00, hdrtype=0x00, mfdev=0
>[5] 	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=a, irq=255
>[5] pci0:0:31:4: reprobing on driver added
>[5] pci1: driver added
>[5] pci2: driver added
>[5] pci3: driver added
>[5] found->	vendor=0x8086, dev=0x2725, revid=0x1a
>[5] 	domain=0, bus=3, slot=0, func=0
>[5] 	class=02-80-00, hdrtype=0x00, mfdev=0
>[5] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=a, irq=255
>[5] 	powerspec 3  supports D0 D3  current D3
>[5] 	MSI supports 1 message, 64 bit
>[5] 	MSI-X supports 16 messages in map 0x10
>[5] pci0:3:0:0: reprobing on driver added
>[5] pci3: set ACPI power state D0 on \134_SB_.PCI0.RP02.PXSX
>[5] pci0:3:0:0: Transition from D3 to D0
>[5] pci0:3:0:0: Transition from D0 to D3
>[5] pci4: driver added
>[5] pci5: driver added
>[5] ugen0.1: <Intel XHCI root HUB> at usbus0
>[5] uhub0 on usbus0
>[5] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>[5] Linux x86-64 ELF exec handler installed
>[5] Linux x86-64 vDSO tsc_selector: 3
>[5] Linux x86-64 vDSO cpu_selector: 2
>[5] procfs registered
>[5] linprocfs registered
>[5] linsysfs registered
>[5] wlan: <802.11 Link Layer>
>[5] Intel(R) Wireless WiFi based driver for FreeBSD
>[5] acpi_wmi0: <ACPI-WMI mapping> on acpi0
>[5] acpi_wmi1: <ACPI-WMI mapping> on acpi0
>[5] acpi_wmi1: Embedded MOF found
>[5] ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
>[5] acpi_wmi2: <ACPI-WMI mapping> on acpi0
>[5] acpi_wmi2: Embedded MOF found
>[5] ACPI: \134_SB.AMWV.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
>[5] acpi_wmi3: <ACPI-WMI mapping> on acpi0
>[5] acpi_wmi4: <ACPI-WMI mapping> on acpi0
>[5] pci0: driver added
>[5] found->	vendor=0x8086, dev=0x1903, revid=0x05
>[5] 	domain=0, bus=0, slot=4, func=0
>[5] 	class=11-80-00, hdrtype=0x00, mfdev=0
>[5] 	cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=a, irq=255
>[5] 	powerspec 3  supports D0 D3  current D3
>[5] 	MSI supports 1 message
>[5] pci0:0:4:0: reprobing on driver added
>[5] pci0: set ACPI power state D0 on \134_SB_.PCI0.B0D4
>[5] pci0:0:4:0: Transition from D3 to D0
>[5] pci0:0:4:0: Transition from D0 to D3
>[5] found->	vendor=0x8086, dev=0xa131, revid=0x31
>[5] 	domain=0, bus=0, slot=20, func=2
>[5] 	class=11-80-00, hdrtype=0x00, mfdev=0
>[5] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=c, irq=255
>[5] 	powerspec 3  supports D0 D3  current D3
>[5] 	MSI supports 1 message
>[5] pci0:0:20:2: reprobing on driver added
>[5] pci0:0:20:2: Transition from D3 to D0
>[5] pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xed424000-0xed424fff at device 20.2 on pci0
>[5] pchtherm0: Catastrophic Power Down Locked Enable
>[5] pchtherm0: SMBus report  Enable
>[5] pchtherm0: SMI on alert Locked Disable
>[5] pchtherm0: TSPM: 6<Lock,DTSS0EN>
>[5] pchtherm0: MAX Thermal Sensor Shutdown Time 32s
>[5] pchtherm0: Throttling 5<Lock,TTEN>
>[5] pchtherm0: TL2 flag 2<Lock>
>[5] found->	vendor=0x8086, dev=0xa160, revid=0x31
>[5] 	domain=0, bus=0, slot=21, func=0
>[5] 	class=11-80-00, hdrtype=0x00, mfdev=1
>[5] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[5] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[5] 	intpin=a, irq=255
>[5] 	powerspec 3  supports D0 D3  current D3
>[5] pci0:0:21:0: reprobing on driver added
>[5] pci0: set ACPI power state D0 on \134_SB_.PCI0.I2C0
>[5] ig4iic0: <Intel Sunrise Point-H I2C Controller-0> mem 0xed423000-0xed423fff at device 21.0 on pci0
>[5] ig4iic0: Using MSI
>[5] pcib0: matched entry for 0.21.INTA
>[5] pcib0: slot 21 INTA hardwired to IRQ 16
>[5] ig4iic0: Controller parameters:
>[5]   Speed: Fast
>[5]   Regs:  HCNT  :LCNT  :SDAHLD
>[5]   Std:   0x0201:0x0257:0x001c
>[5]   Fast:  0x0069:0x00bf:0x001c
>[5]   FIFO:  RX:0x0040: TX:0x0040
>[5] ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 4 vector 51
>[5] iicbus7: <Philips I2C bus (ACPI-hinted)> on ig4iic0
>[6] uhub0: 26 ports with 26 removable, self powered
>[6] iic7: <I2C generic I/O> on iicbus7
>[6] found->	vendor=0x8086, dev=0xa161, revid=0x31
>[6] 	domain=0, bus=0, slot=21, func=1
>[6] 	class=11-80-00, hdrtype=0x00, mfdev=1
>[6] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[6] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[6] 	intpin=b, irq=255
>[6] 	powerspec 3  supports D0 D3  current D3
>[6] pci0:0:21:1: reprobing on driver added
>[6] pci0: set ACPI power state D0 on \134_SB_.PCI0.I2C1
>[6] ig4iic1: <Intel Sunrise Point-H I2C Controller-1> mem 0xed422000-0xed422fff at device 21.1 on pci0
>[6] ig4iic1: Using MSI
>[6] pcib0: matched entry for 0.21.INTB
>[6] pcib0: slot 21 INTB hardwired to IRQ 17
>[6] ig4iic1: Controller parameters:
>[6]   Speed: Fast
>[6]   Regs:  HCNT  :LCNT  :SDAHLD
>[6]   Std:   0x0201:0x0257:0x001c
>[6]   Fast:  0x0069:0x00bf:0x001c
>[6]   FIFO:  RX:0x0040: TX:0x0040
>[6] ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 6 vector 51
>[6] iicbus8: <Philips I2C bus (ACPI-hinted)> on ig4iic1
>[6] iicbus8: found ACPI child
>[6]   SlaveAddress:      0x002c
>[6]   ConnectionSpeed:   400000Hz
>[6]   SlaveMode:         ControllerInitiated
>[6]   AddressingMode:    7Bit
>[6]   ConnectionSharing: Exclusive
>[6]   IRQ:               51
>[6] unknown: set ACPI power state D0 on \134_SB_.PCI0.I2C1.TPD1
>[6] ugen0.2: <Broadcom Corp 5880> at usbus0
>[7] iicbus8: <unknown card> at addr 0x2c
>[7] iic8: <I2C generic I/O> on iicbus8
>[7] found->	vendor=0x8086, dev=0xa13a, revid=0x31
>[7] 	domain=0, bus=0, slot=22, func=0
>[7] 	class=07-80-00, hdrtype=0x00, mfdev=1
>[7] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[7] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[7] 	intpin=a, irq=255
>[7] 	powerspec 3  supports D0 D3  current D3
>[7] 	MSI supports 1 message, 64 bit
>[7] pci0:0:22:0: reprobing on driver added
>[7] pci0: set ACPI power state D0 on \134_SB_.PCI0.HECI
>[7] pci0:0:22:0: Transition from D3 to D0
>[7] pci0:0:22:0: Transition from D0 to D3
>[7] found->	vendor=0x8086, dev=0xa121, revid=0x31
>[7] 	domain=0, bus=0, slot=31, func=2
>[7] 	class=05-80-00, hdrtype=0x00, mfdev=1
>[7] 	cmdreg=0x0002, statreg=0x0000, cachelnsz=0 (dwords)
>[7] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[7] pci0:0:31:2: reprobing on driver added
>[7] found->	vendor=0x8086, dev=0xa123, revid=0x31
>[7] 	domain=0, bus=0, slot=31, func=4
>[7] 	class=0c-05-00, hdrtype=0x00, mfdev=0
>[7] 	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
>[7] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[7] 	intpin=a, irq=255
>[7] pci0:0:31:4: reprobing on driver added
>[7] ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xf040-0xf05f mem 0xed41e000-0xed41e0ff at device 31.4 on pci0
>[7] pcib0: matched entry for 0.31.INTA
>[7] pcib0: slot 31 INTA hardwired to IRQ 16
>[7] smbus0: <System Management Bus> on ichsmb0
>[7] pci1: driver added
>[7] pci2: driver added
>[7] pci3: driver added
>[7] found->	vendor=0x8086, dev=0x2725, revid=0x1a
>[7] 	domain=0, bus=3, slot=0, func=0
>[7] 	class=02-80-00, hdrtype=0x00, mfdev=0
>[7] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[7] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[7] 	intpin=a, irq=255
>[7] 	powerspec 3  supports D0 D3  current D3
>[7] 	MSI supports 1 message, 64 bit
>[7] 	MSI-X supports 16 messages in map 0x10
>[7] pci0:3:0:0: reprobing on driver added
>[7] pci3: set ACPI power state D0 on \134_SB_.PCI0.RP02.PXSX
>[7] pci0:3:0:0: Transition from D3 to D0
>[7] iwlwifi0: <iwlwifi> mem 0xed200000-0xed203fff at device 0.0 on pci3
>[7] iwlwifi0: attempting to allocate 10 MSI-X vectors (16 supported)
>[7] msi: routing MSI-X IRQ 141 to local APIC 0 vector 54
>[7] msi: routing MSI-X IRQ 142 to local APIC 2 vector 52
>[7] msi: routing MSI-X IRQ 143 to local APIC 4 vector 53
>[7] msi: routing MSI-X IRQ 144 to local APIC 6 vector 53
>[7] msi: routing MSI-X IRQ 145 to local APIC 0 vector 55
>[7] msi: routing MSI-X IRQ 146 to local APIC 2 vector 53
>[7] msi: routing MSI-X IRQ 147 to local APIC 4 vector 54
>[7] msi: routing MSI-X IRQ 148 to local APIC 6 vector 54
>[7] msi: routing MSI-X IRQ 149 to local APIC 0 vector 56
>[7] msi: routing MSI-X IRQ 150 to local APIC 2 vector 54
>[7] iwlwifi0: using IRQs 141-150 for MSI-X
>[7] msi: Assigning MSI-X IRQ 142 to local APIC 0 vector 57
>[7] msi: Assigning MSI-X IRQ 143 to local APIC 1 vector 50
>[7] msi: Assigning MSI-X IRQ 144 to local APIC 2 vector 52
>[7] msi: Assigning MSI-X IRQ 145 to local APIC 3 vector 50
>[7] msi: Assigning MSI-X IRQ 146 to local APIC 4 vector 53
>[7] msi: Assigning MSI-X IRQ 147 to local APIC 5 vector 50
>[7] msi: Assigning MSI-X IRQ 149 to local APIC 7 vector 50
>[7] iwlwifi0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000
>[7] iwlwifi0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000
>[7] firmware: 'iwlwifi-ty-a0-gf-a0-83.ucode' version 83: 1683076 bytes loaded at 0xffffffff83483000
>[7] iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0-83.ucode'
>[7] iwlwifi0: api flags index 2 larger than supported by driver
>[7] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41
>[7] iwl-debug-yoyo.bin: could not load firmware image, error 2
>[7] Trying to load binary firmware from /boot/firmware/iwl-debug-yoyo.bin
>[7] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either
>[7] iwl-debug-yoyo.bin: could not load firmware image, error 2
>[7] Trying to load binary firmware from /boot/firmware/iwl-debug-yoyo.bin
>[7] iwl-debug-yoyo.bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo.bin either
>[7] iwl-debug-yoyo_bin: could not load firmware image, error 2
>[7] Trying to load binary firmware from /boot/firmware/iwl-debug-yoyo_bin
>[7] iwl-debug-yoyo_bin: could not load binary firmware /boot/firmware/iwl-debug-yoyo_bin either
>[7] iwl_debug_yoyo_bin: could not load firmware image, error 2
>[7] Trying to load binary firmware from /boot/firmware/iwl_debug_yoyo_bin
>[7] iwl_debug_yoyo_bin: could not load binary firmware /boot/firmware/iwl_debug_yoyo_bin either
>[7] iwlwifi0: loaded firmware version 83.e8f84e98.0 ty-a0-gf-a0-83.ucode op_mode iwlmvm
>[7] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420
>[7] iwlwifi0: WRT: Invalid buffer destination: 0
>[7] iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20
>[7] iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
>[7] iwlwifi0: WFPM_AUTH_KEY_0: 0x90
>[7] iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0
>[7] firmware: 'iwlwifi-ty-a0-gf-a0.pnvm' version 83: 55484 bytes loaded at 0xffffffff83483000
>[7] iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0.pnvm'
>[7] iwlwifi0: loaded PNVM version 181407b3
>[7] iwlwifi0: Detected RF GF, rfid=0x10d000
>[8] iwlwifi0: base HW address: c8:8a:9a:60:a0:db
>[8] iwlwifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>[8] iwlwifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>[8] iwlwifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>[8] pci4: driver added
>[8] pci5: driver added
>[8] pci0: driver added
>[8] found->	vendor=0x8086, dev=0x1903, revid=0x05
>[8] 	domain=0, bus=0, slot=4, func=0
>[8] 	class=11-80-00, hdrtype=0x00, mfdev=0
>[8] 	cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message
>[8] pci0:0:4:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.B0D4
>[8] pci0:0:4:0: Transition from D3 to D0
>[8] pci0:0:4:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa13a, revid=0x31
>[8] 	domain=0, bus=0, slot=22, func=0
>[8] 	class=07-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message, 64 bit
>[8] pci0:0:22:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.HECI
>[8] pci0:0:22:0: Transition from D3 to D0
>[8] pci0:0:22:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa121, revid=0x31
>[8] 	domain=0, bus=0, slot=31, func=2
>[8] 	class=05-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0000, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] pci0:0:31:2: reprobing on driver added
>[8] pci1: driver added
>[8] pci2: driver added
>[8] pci3: driver added
>[8] pci4: driver added
>[8] pci5: driver added
>[8] pci0: driver added
>[8] found->	vendor=0x8086, dev=0x1903, revid=0x05
>[8] 	domain=0, bus=0, slot=4, func=0
>[8] 	class=11-80-00, hdrtype=0x00, mfdev=0
>[8] 	cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message
>[8] pci0:0:4:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.B0D4
>[8] pci0:0:4:0: Transition from D3 to D0
>[8] pci0:0:4:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa13a, revid=0x31
>[8] 	domain=0, bus=0, slot=22, func=0
>[8] 	class=07-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message, 64 bit
>[8] pci0:0:22:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.HECI
>[8] pci0:0:22:0: Transition from D3 to D0
>[8] pci0:0:22:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa121, revid=0x31
>[8] 	domain=0, bus=0, slot=31, func=2
>[8] 	class=05-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0000, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] pci0:0:31:2: reprobing on driver added
>[8] pci1: driver added
>[8] pci2: driver added
>[8] pci3: driver added
>[8] pci4: driver added
>[8] pci5: driver added
>[8] pci0: driver added
>[8] found->	vendor=0x8086, dev=0x1903, revid=0x05
>[8] 	domain=0, bus=0, slot=4, func=0
>[8] 	class=11-80-00, hdrtype=0x00, mfdev=0
>[8] 	cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message
>[8] pci0:0:4:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.B0D4
>[8] pci0:0:4:0: Transition from D3 to D0
>[8] pci0:0:4:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa13a, revid=0x31
>[8] 	domain=0, bus=0, slot=22, func=0
>[8] 	class=07-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message, 64 bit
>[8] pci0:0:22:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.HECI
>[8] pci0:0:22:0: Transition from D3 to D0
>[8] pci0:0:22:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa121, revid=0x31
>[8] 	domain=0, bus=0, slot=31, func=2
>[8] 	class=05-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0000, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] pci0:0:31:2: reprobing on driver added
>[8] pci1: driver added
>[8] pci2: driver added
>[8] pci3: driver added
>[8] pci4: driver added
>[8] pci5: driver added
>[8] pci0: driver added
>[8] found->	vendor=0x8086, dev=0x1903, revid=0x05
>[8] 	domain=0, bus=0, slot=4, func=0
>[8] 	class=11-80-00, hdrtype=0x00, mfdev=0
>[8] 	cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message
>[8] pci0:0:4:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.B0D4
>[8] pci0:0:4:0: Transition from D3 to D0
>[8] pci0:0:4:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa13a, revid=0x31
>[8] 	domain=0, bus=0, slot=22, func=0
>[8] 	class=07-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message, 64 bit
>[8] pci0:0:22:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.HECI
>[8] pci0:0:22:0: Transition from D3 to D0
>[8] pci0:0:22:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa121, revid=0x31
>[8] 	domain=0, bus=0, slot=31, func=2
>[8] 	class=05-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0000, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] pci0:0:31:2: reprobing on driver added
>[8] pci1: driver added
>[8] pci2: driver added
>[8] pci3: driver added
>[8] pci4: driver added
>[8] pci5: driver added
>[8] No TSX change made
>[8] CPU: Intel(R) Core(TM) i7-7820HQ CPU @ 2.90GHz (2904.00-MHz K8-class CPU)
>[8]   Origin="GenuineIntel"  Id=0x906e9  Family=0x6  Model=0x9e  Stepping=9
>[8]   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>[8]   Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>[8]   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>[8]   AMD Features2=0x121<LAHF,ABM,Prefetch>
>[8]   Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
>[8]   Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
>[8]   XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>[8]   IA32_ARCH_CAPS=0xa000c04<RSBA>
>[8]   VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
>[8]         Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
>[8]         Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
>[8]         Secondary Processor Controls=0x5ffcff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,VMCS,EPT#VE,XSAVES>
>[8]         Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
>[8]         Entry Controls=0xda0400
>[8]         EPT Features=0x6734141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
>[8]         VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
>[8]   TSC: P-state invariant, performance statistics
>[8] Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries
>[8] Data TLB: 4 KB pages, 4-way set associative, 64 entries
>[8] Instruction TLB: 2M/4M pages, fully associative, 8 entries
>[8] Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
>[8] 64-Byte prefetching
>[8] Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries
>[8] L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
>[8] bridge0: bpf attached
>[8] bridge0: Ethernet address: 58:9c:fc:10:21:03
>[8] bridge0: changing name to 'wifibox0'
>[8] tap0: bpf attached
>[8] tap0: Ethernet address: 58:9c:fc:10:ff:fb
>[8] tap0: promiscuous mode enabled
>[8] wifibox0: link state changed to DOWN
>[8] pci0: driver added
>[8] found->	vendor=0x8086, dev=0x1903, revid=0x05
>[8] 	domain=0, bus=0, slot=4, func=0
>[8] 	class=11-80-00, hdrtype=0x00, mfdev=0
>[8] 	cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message
>[8] pci0:0:4:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.B0D4
>[8] pci0:0:4:0: Transition from D3 to D0
>[8] pci0:0:4:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa13a, revid=0x31
>[8] 	domain=0, bus=0, slot=22, func=0
>[8] 	class=07-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message, 64 bit
>[8] pci0:0:22:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.HECI
>[8] pci0:0:22:0: Transition from D3 to D0
>[8] pci0:0:22:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa121, revid=0x31
>[8] 	domain=0, bus=0, slot=31, func=2
>[8] 	class=05-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0000, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] pci0:0:31:2: reprobing on driver added
>[8] pci1: driver added
>[8] pci2: driver added
>[8] pci3: driver added
>[8] pci4: driver added
>[8] pci5: driver added
>[8] pci0: driver added
>[8] found->	vendor=0x8086, dev=0x1903, revid=0x05
>[8] 	domain=0, bus=0, slot=4, func=0
>[8] 	class=11-80-00, hdrtype=0x00, mfdev=0
>[8] 	cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message
>[8] pci0:0:4:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.B0D4
>[8] pci0:0:4:0: Transition from D3 to D0
>[8] pci0:0:4:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa13a, revid=0x31
>[8] 	domain=0, bus=0, slot=22, func=0
>[8] 	class=07-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] 	intpin=a, irq=255
>[8] 	powerspec 3  supports D0 D3  current D3
>[8] 	MSI supports 1 message, 64 bit
>[8] pci0:0:22:0: reprobing on driver added
>[8] pci0: set ACPI power state D0 on \134_SB_.PCI0.HECI
>[8] pci0:0:22:0: Transition from D3 to D0
>[8] pci0:0:22:0: Transition from D0 to D3
>[8] found->	vendor=0x8086, dev=0xa121, revid=0x31
>[8] 	domain=0, bus=0, slot=31, func=2
>[8] 	class=05-80-00, hdrtype=0x00, mfdev=1
>[8] 	cmdreg=0x0002, statreg=0x0000, cachelnsz=0 (dwords)
>[8] 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>[8] pci0:0:31:2: reprobing on driver added
>[8] pci1: driver added
>[8] pci2: driver added
>[8] pci3: driver added
>[8] pci4: driver added
>[8] pci5: driver added
>[8] iwlwifi0: detached
>[8] pci0:3:0:0: Device leaked memory resources
>[8] pci0:3:0:0: Transition from D0 to D3
>[8] ppt0 mem 0xed200000-0xed203fff at device 0.0 on pci3
>[8] ppt0: attached
>[8] tap0: link state changed to UP
>[8] wifibox0: link state changed to UP
>[9] lo0: link state changed to UP
>[10] ppt0: attempting to allocate 16 MSI-X vectors (16 supported)
>[10] msi: routing MSI-X IRQ 141 to local APIC 4 vector 53
>[10] msi: routing MSI-X IRQ 142 to local APIC 6 vector 53
>[10] msi: routing MSI-X IRQ 143 to local APIC 0 vector 54
>[10] msi: routing MSI-X IRQ 144 to local APIC 2 vector 52
>[10] msi: routing MSI-X IRQ 145 to local APIC 4 vector 54
>[10] msi: routing MSI-X IRQ 146 to local APIC 6 vector 54
>[10] msi: routing MSI-X IRQ 147 to local APIC 0 vector 55
>[10] msi: routing MSI-X IRQ 148 to local APIC 2 vector 53
>[10] msi: routing MSI-X IRQ 149 to local APIC 4 vector 55
>[10] msi: routing MSI-X IRQ 150 to local APIC 6 vector 55
>[10] msi: routing MSI-X IRQ 151 to local APIC 0 vector 56
>[10] msi: routing MSI-X IRQ 152 to local APIC 2 vector 54
>[10] msi: routing MSI-X IRQ 153 to local APIC 4 vector 56
>[10] msi: routing MSI-X IRQ 154 to local APIC 6 vector 56
>[10] msi: routing MSI-X IRQ 155 to local APIC 0 vector 57
>[10] msi: routing MSI-X IRQ 156 to local APIC 2 vector 55
>[10] ppt0: using IRQs 141-156 for MSI-X
>[11] unknown: set ACPI power state D0 on \134_SB_.PCI0.I2C1.TPD1
>[11] iichid0: <DLL07B1:00 044E:120B I2C HID device> at addr 0x2c irq 51 on iicbus8
>[11] ioapic0: routing intpin 51 (PCI IRQ 51) to lapic 4 vector 57
>[11] hidbus0: <HID bus> on iichid0
>[11] hms0: <DLL07B1:00 044E:120B Mouse> on hidbus0
>[11] hms0: 3 buttons and [XYWH] coordinates ID=1
>[11] hkbd0: <DLL07B1:00 044E:120B Keyboard> on hidbus0
>[11] kbd2 at hkbd0
>[11] kbd2: hkbd0, generic (0), config:0x0, flags:0x3d0000

Actions: View

Attachments on bug 283815: 256370 | 256371 | 256372