Attachment 80297 Details for Bug 115194 – file.txt

file.txt

file.txt (text/plain), 8.03 KB, created by Andrei Kolu on 2007-08-04 12:00:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrei Kolu

Created: 2007-08-04 12:00:02 UTC

Size: 8.03 KB

patch

obsolete

>Copyright (c) 1992-2007 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 7.0-CURRENT-200706 #0: Thu Jun  7 21:38:42 UTC 2007
>    root@stiles.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>WARNING: WITNESS option enabled, expect reduced performance.
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz (1662.51-MHz K8-class CPU)
>  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
>  AMD Features=0x20100800<SYSCALL,NX,LM>
>  AMD Features2=0x1<LAHF>
>  Cores per package: 2
>usable memory = 1050714112 (1002 MB)
>avail memory  = 1012428800 (965 MB)
>ACPI APIC Table: <DELL   M07    >
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
>ioapic0: Changing APIC ID to 2
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>kbd1 at kbdmux0
>ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>acpi0: <DELL M07    > on motherboard
>acpi0: [ITHREAD]
>acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 2000
>acpi0: reservation of 0, 9fc00 (3) failed
>acpi0: reservation of 100000, 3f593400 (3) failed
>acpi0: reservation of fed00000, 400 (3) failed
>Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>cpu0: <ACPI CPU> on acpi0
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>cpu1: <ACPI CPU> on acpi0
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>p4tcc1: <CPU Frequency Thermal Control> on cpu1
>acpi_acad0: <AC Adapter> on acpi0
>battery0: <ACPI Control Method Battery> on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_button0: <Power Button> on acpi0
>acpi_button1: <Sleep Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 0xeff00000-0xeff7ffff,0xd0000000-0xdfffffff,0xefec0000-0xefefffff irq 16 at device 2.0 on pci0
>agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
>agp0: detected 7932k stolen memory
>agp0: aperture size is 256M
>vgapci1: <VGA-compatible display> mem 0xeff80000-0xefffffff at device 2.1 on pci0
>pcm0: <Intel 82801G High Definition Audio Controller> mem 0xefebc000-0xefebffff irq 21 at device 27.0 on pci0
>pcm0: [ITHREAD]
>pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
>pci11: <ACPI PCI bus> on pcib1
>pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
>pci12: <ACPI PCI bus> on pcib2
>pci12: <network> at device 0.0 (no driver attached)
>pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
>pci13: <ACPI PCI bus> on pcib3
>uhci0: <UHCI (generic) USB controller> port 0xbf80-0xbf9f irq 20 at device 29.0 on pci0
>uhci0: [GIANT-LOCKED]
>uhci0: [ITHREAD]
>usb0: <UHCI (generic) USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <UHCI (generic) USB controller> port 0xbf60-0xbf7f irq 21 at device 29.1 on pci0
>uhci1: [GIANT-LOCKED]
>uhci1: [ITHREAD]
>usb1: <UHCI (generic) USB controller> on uhci1
>usb1: USB revision 1.0
>uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <UHCI (generic) USB controller> port 0xbf40-0xbf5f irq 22 at device 29.2 on pci0
>uhci2: [GIANT-LOCKED]
>uhci2: [ITHREAD]
>usb2: <UHCI (generic) USB controller> on uhci2
>usb2: USB revision 1.0
>uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
>uhub2: 2 ports with 2 removable, self powered
>uhci3: <UHCI (generic) USB controller> port 0xbf20-0xbf3f irq 23 at device 29.3 on pci0
>uhci3: [GIANT-LOCKED]
>uhci3: [ITHREAD]
>usb3: <UHCI (generic) USB controller> on uhci3
>usb3: USB revision 1.0
>uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
>uhub3: 2 ports with 2 removable, self powered
>ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80000-0xffa803ff irq 20 at device 29.7 on pci0
>ehci0: [GIANT-LOCKED]
>ehci0: [ITHREAD]
>usb4: EHCI version 1.0
>usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
>usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
>usb4: USB revision 2.0
>uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
>uhub4: 8 ports with 8 removable, self powered
>ugen0: <vendor 0x046d product 0x08c6, class 0/0, rev 2.00/80.05, addr 2> on uhub4
>pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci3: <ACPI PCI bus> on pcib4
>bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xef9fe000-0xef9fffff irq 17 at device 0.0 on pci3
>miibus0: <MII bus> on bfe0
>bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
>bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>bfe0: using obsoleted if_watchdog interface
>bfe0: Ethernet address: 00:18:8b:ad:fa:07
>bfe0: [ITHREAD]
>fwohci0: <1394 Open Host Controller Interface> mem 0xef9fd800-0xef9fdfff irq 19 at device 1.0 on pci3
>fwohci0: [FILTER]
>fwohci0: OHCI version 1.10 (ROM=0)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 39:4f:c0:00:3b:57:d8:50
>fwohci0: Phy 1394a available S400, 1 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>dcons_crom0: <dcons configuration ROM> on firewire0
>dcons_crom0: bus_addr 0x3d27c000
>fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 3a:4f:c0:57:d8:50
>fwe0: Ethernet address: 3a:4f:c0:57:d8:50
>fwip0: <IP over FireWire> on firewire0
>fwip0: Firewire address: 39:4f:c0:00:3b:57:d8:50 @ 0xfffe00000000, S400, maxrec 2048
>sbp0: <SBP-2/SCSI over FireWire> on firewire0
>fwohci0: Initiate bus reset
>fwohci0: BUS reset
>fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>pci3: <base peripheral> at device 1.1 (no driver attached)
>pci3: <base peripheral> at device 1.2 (no driver attached)
>pci3: <base peripheral> at device 1.3 (no driver attached)
>pci3: <base peripheral> at device 1.4 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH7M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2 on pci0
>ata0: <ATA channel 0> on atapci0
>ata0: [ITHREAD]
>ata1: <ATA channel 1> on atapci0
>ata1: [ITHREAD]
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>acpi_tz0: <Thermal Zone> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbd0: [ITHREAD]
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: [ITHREAD]
>psm0: model Generic PS/2 mouse, device ID 0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff on isa0
>ppc0: cannot reserve I/O port range
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 8250 or not responding
>sio0: [FILTER]
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> on uhub0
>ums0: 3 buttons and Z dir.
>Timecounters tick every 1.000 msec
>firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>firewire0: bus manager 0 (me)
>ad0: 57231MB <SAMSUNG HM060HI YD100-15> at ata0-master SATA150
>acd0: DVDR <PHILIPS DVD+/-RW SDVD8820/AD20> at ata1-master UDMA33
>pcm0: <HDA Codec: Sigmatel STAC9221>
>pcm0: <HDA Driver Revision: 20070505_0044>
>GEOM_LABEL: Label for provider ad0s1 is ntfs/WinXP.
>SMP: AP CPU #1 Launched!
>Trying to mount root from ufs:/dev/ad0s2a

Actions: View

Attachments on bug 115194: 80297