Attachment 96867 Details for Bug 135572 – file.diff

[patch] file.diff

file.diff (text/plain), 33.68 KB, created by Thomas-Martin Seck on 2009-06-14 10:00:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas-Martin Seck

Created: 2009-06-14 10:00:09 UTC

Size: 33.68 KB

patch

obsolete

>Index: Makefile
>===================================================================
>--- Makefile	(.../squid30)	(revision 1611)
>+++ Makefile	(.../squid31)	(revision 1611)
>@@ -14,25 +14,15 @@
> #   define SQUID_UID=nobody and SQUID_GID=nogroup in your make environment
> #   before you start the update or installation of this port.
> #
>-# SQUID_LANGUAGES
>-#   A list of languages for which error page files should be installed
>-#   (default: all available)
>+# Note:
>+# Starting with Squid 3.1 SQUID_LANGUAGES and SQUID_DEFAULT_LANG are no longer
>+# available and will be ignored.
> #
>-#   E.g. use `make SQUID_LANGUAGES="English French"' if you want to
>-#   install the files for these languages only.
>-#   Use `make -VSQUID_LANGUAGES' or scroll down to this variable's
>-#   definition to see which values are valid.
>-#
>-# SQUID_DEFAULT_LANG
>-#   If you define SQUID_LANGUAGES, select which language should be the default
>-#   one (this variable defaults to "templates"). This setting can be overwritten
>-#   with squid.conf's error_directory directive.
>-#
> # SQUID_CONFIGURE_ARGS
> #   Additional configuration options.
> #
> #   To enable them, use e.g
>-#   `make SQUID_CONFIGURE_ARGS="--enable-dlmalloc --enable-truncate" install'
>+#   `make SQUID_CONFIGURE_ARGS="--enable-ntml-fail-open" install'
> #
> #   The list below may be incomplete, please see the configure script
> #   in the Squid source distribution for the complete list of additional
>@@ -58,10 +48,12 @@
> #     to indicate variance within an accelerator setup. Typically used
> #     together with other code that adds custom HTTP headers to the
> #     requests.
>+#    --disable-loadable-modules
>+#     Do not support loadable modules.
> 
> PORTNAME=	squid
>-PORTVERSION=	3.0.${SQUID_STABLE_VER}
>-CATEGORIES=	www
>+PORTVERSION=	3.1.0.${SQUID_BETA_VER}
>+CATEGORIES=	www ipv6
> MASTER_SITES=	ftp://ftp.squid-cache.org/pub/%SUBDIR%/ \
> 		ftp://mirrors.24-7-solutions.net/pub/squid/%SUBDIR%/ \
> 		ftp://ftp.belnet.be/packages/squid/pub/%SUBDIR%/ \
>@@ -70,17 +62,17 @@
> 		ftp://ftp.ntua.gr/pub/www/Squid/%SUBDIR%/ \
> 		ftp://ftp.ccs.neu.edu/pub/mirrors/squid.nlanr.net/pub/%SUBDIR%/ \
> 		${MASTER_SITE_RINGSERVER:S,%SUBDIR%,net/www/squid/&,} \
>-		http://www.squid-cache.org/Versions/v3/3.0/ \
>-		http://www3.us.squid-cache.org/Versions/v3/3.0/ \
>-		http://www1.at.squid-cache.org/Versions/v3/3.0/ \
>-		http://www2.nl.squid-cache.org/Versions/v3/3.0/ \
>-		http://www1.ru.squid-cache.org/Versions/v3/3.0/ \
>-		http://www1.uk.squid-cache.org/Versions/v3/3.0/ \
>-		http://www1.jp.squid-cache.org/Versions/v3/3.0/ \
>-		http://www2.tw.squid-cache.org/Versions/v3/3.0/
>-MASTER_SITE_SUBDIR=	squid-3/STABLE
>-DISTNAME=	squid-3.0.STABLE${SQUID_STABLE_VER}
>-DIST_SUBDIR=	squid3.0
>+		http://www.squid-cache.org/Versions/v3/3.1/ \
>+		http://www3.us.squid-cache.org/Versions/v3/3.1/ \
>+		http://www1.at.squid-cache.org/Versions/v3/3.1/ \
>+		http://www2.nl.squid-cache.org/Versions/v3/3.1/ \
>+		http://www1.ru.squid-cache.org/Versions/v3/3.1/ \
>+		http://www1.uk.squid-cache.org/Versions/v3/3.1/ \
>+		http://www1.jp.squid-cache.org/Versions/v3/3.1/ \
>+		http://www2.tw.squid-cache.org/Versions/v3/3.1/
>+MASTER_SITE_SUBDIR=	squid-3/DEVEL
>+DISTNAME=	squid-3.1.0.${SQUID_BETA_VER}
>+DIST_SUBDIR=	squid3.1
> 
> PATCH_SITES=	http://www.squid-cache.org/%SUBDIR%/ \
> 		http://www2.us.squid-cache.org/%SUBDIR%/ \
>@@ -91,17 +83,17 @@
> 		http://www1.uk.squid-cache.org/%SUBDIR%/ \
> 		http://www1.jp.squid-cache.org/%SUBDIR%/ \
> 		http://www1.tw.squid-cache.org/%SUBDIR%/
>-PATCH_SITE_SUBDIR=	Versions/v3/3.0/changesets
>+PATCH_SITE_SUBDIR=	Versions/v3/3.1/changesets
> PATCHFILES=
> 
> MAINTAINER=	tmseck@web.de
>-COMMENT=	HTTP Caching Proxy
>+COMMENT=	HTTP Caching Proxy (BETA Version)
> 
>-LATEST_LINK=	squid30
>+LATEST_LINK=	squid31
> 
>-SQUID_STABLE_VER=	15
>+SQUID_BETA_VER=	8
> 
>-CONFLICTS=	squid-2.[0-9].* cacheboy-[0-9]*
>+CONFLICTS=	squid-2.[0-9].* squid-3.[^1].* cacheboy-[0-9]*
> GNU_CONFIGURE=	yes
> USE_BZIP2=	yes
> USE_PERL5=	yes
>@@ -119,13 +111,13 @@
> 
> OPTIONS=	SQUID_LDAP_AUTH "Install LDAP authentication helpers" off \
> 		SQUID_SASL_AUTH "Install SASL authentication helpers" off \
>+		SQUID_IPV6 "Enable IPv6 support" on \
> 		SQUID_DELAY_POOLS "Enable delay pools" off \
> 		SQUID_SNMP "Enable SNMP support" on \
>-		SQUID_CARP "Enable CARP support" on \
> 		SQUID_SSL "Enable SSL support for reverse proxies" off \
> 		SQUID_PINGER "Install the icmp helper" off \
> 		SQUID_DNS_HELPER "Use the old 'dnsserver' helper" off \
>-		SQUID_HTCP "Enable HTCP support" off \
>+		SQUID_HTCP "Enable HTCP support" on \
> 		SQUID_VIA_DB "Enable forward/via database" off \
> 		SQUID_CACHE_DIGESTS "Enable cache digests" off \
> 		SQUID_WCCP "Enable Web Cache Coordination Prot. v1" on \
>@@ -138,6 +130,8 @@
> 		SQUID_IPFW "Enable transparent proxying with IPFW" off \
> 		SQUID_PF "Enable transparent proxying with PF" off \
> 		SQUID_IPFILTER "Enable transp. proxying with IPFilter" off \
>+		SQUID_FOLLOW_XFF "Follow X-Forwarded-For headers" off \
>+		SQUID_ECAP "En. loadable content adaptation modules" off \
> 		SQUID_ICAP "Enable ICAP client functionality" off \
> 		SQUID_ESI "Enable ESI support (experimental)" off \
> 		SQUID_AUFS "Enable the aufs storage scheme" off \
>@@ -148,8 +142,12 @@
> 		SQUID_DEBUG "Enable debugging options" off
> 
> etc_files=	squid/cachemgr.conf.default \
>-		squid/mib.txt squid/mime.conf.default \
>-		squid/msntauth.conf.default squid/squid.conf.default
>+		squid/errorpage.css.default \
>+		squid/mib.txt \
>+		squid/mime.conf.default \
>+		squid/msntauth.conf.default \
>+		squid/squid.conf.default \
>+		squid/squid.conf.documented
> 
> icon_files=	anthony-binhex.gif anthony-bomb.gif anthony-box.gif \
> 		anthony-box2.gif anthony-c.gif anthony-compressed.gif \
>@@ -170,11 +168,23 @@
> 		ERR_ICAP_FAILURE ERR_INVALID_REQ ERR_INVALID_RESP \
> 		ERR_INVALID_URL ERR_LIFETIME_EXP ERR_NO_RELAY \
> 		ERR_ONLY_IF_CACHED_MISS ERR_READ_ERROR ERR_READ_TIMEOUT \
>-		ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE ERR_TOO_BIG ERR_UNSUP_REQ \
>+		ERR_SECURE_CONNECT_FAIL ERR_SHUTTING_DOWN ERR_SOCKET_FAILURE \
>+		ERR_TOO_BIG ERR_UNSUP_REQ ERR_UNSUP_HTTPVERSION \
> 		ERR_URN_RESOLVE ERR_WRITE_ERROR ERR_ZERO_SIZE_OBJECT
>+# XXX:
>+# This is a workaround for the problem that this file does not exist
>+# in the "old-style" error directories (errors/<Language>).
>+error_files_new_only=	ERR_FTP_LISTING
> 
>+error_dirs_old=	Hebrew Hungarian Korean Lithuanian Polish Portuguese  \
>+		Slovak Traditional_Chinese
>+
>+error_dirs_new=	ar az bg ca cs da de el en en-au en-gb en-nz en-us es et \
>+		fa fi fr hy id it ja lv nl pt-br ro ru sr sv tr uk uz zh-cn \
>+		templates
>+
> libexec=	cachemgr.cgi digest_pw_auth diskd ip_user_check \
>-		msnt_auth ncsa_auth ntlm_auth pam_auth smb_auth \
>+		msnt_auth ncsa_auth ntlm_smb_lm_auth pam_auth smb_auth \
> 		smb_auth.sh squid_db_auth squid_radius_auth squid_session \
> 		squid_unix_group wbinfo_group.pl
> .if !defined(SQUID_CONFIGURE_ARGS) || ${SQUID_CONFIGURE_ARGS:M*--disable-unlinkd*} == ""
>@@ -183,6 +193,18 @@
> 
> sbin=		RunAccel RunCache squidclient squid
> 
>+# XXX:
>+# Squid 3.1 changed the default for the pid file location from
>+# ${localstatedir}/logs/squid.pid to ${localstatedir}/squid.pid.
>+#
>+# There are two ways to tackle this:
>+# 1) enforce the old default using --with-pidfile=${PREFIX}/squid/logs/squid.pid
>+# 2) accept the new default (and hardwire it here as well) and make sure
>+#    that ${localstatedir} is writable by the Squid master process. (It
>+#    used not to be, unless the Squid master process had root privileges
>+#    or ${localstatedir}'s ACL is modified (chgrp squid; chmod g+w).)
>+#    This is what we do now, see also files/pkg-install.in.
>+
> CONFIGURE_ARGS=	--with-default-user=${SQUID_UID} \
> 		--bindir=${PREFIX}/sbin  \
> 		--sbindir=${PREFIX}/sbin  \
>@@ -190,6 +212,8 @@
> 		--libexecdir=${PREFIX}/libexec/squid \
> 		--localstatedir=${PREFIX}/squid \
> 		--sysconfdir=${PREFIX}/etc/squid \
>+		--with-logdir=${PREFIX}/squid/logs \
>+		--with-pidfile=${PREFIX}/squid/squid.pid \
> 		--enable-removal-policies="lru heap" \
> 		--disable-linux-netfilter \
> 		--disable-linux-tproxy \
>@@ -230,17 +254,18 @@
> 			--enable-basic-auth-helpers="${basic_auth}" \
> 			--enable-digest-auth-helpers="${digest_auth}" \
> 			--enable-external-acl-helpers="${external_acl}" \
>-			--enable-ntlm-auth-helpers="SMB"
>+			--enable-ntlm-auth-helpers="smb_lm"
> .if !defined(NO_KERBEROS) && !defined(WITHOUT_KERBEROS)
>-# XXX This currently only works with heimdal from the base system,
>-#     see files/patch-squid_kerb_auth:
> CONFIGURE_ARGS+=	--enable-negotiate-auth-helpers="squid_kerb_auth"
>-libexec+=	squid_kerb_auth
>+# XXX:
>+# these files moved from libexec to sbin : Bug or Feature?
>+sbin+=	negotiate_kerb_auth negotiate_kerb_auth_test \
>+	squid_kerb_auth squid_kerb_auth_test
> .endif
> 
> # Storage schemes:
> 
>-storage_schemes=	ufs diskd null
>+storage_schemes=	ufs diskd
> .if defined(WITH_SQUID_AUFS)
> storage_schemes+=	aufs
> # Only document switching from libpthread to libthr using libmap.conf
>@@ -253,23 +278,23 @@
> CFLAGS+=	${PTHREAD_CFLAGS}
> .endif
> .if defined(WITH_SQUID_COSS)
>-# Starting with 3.0.STABLE9, COSS is disabled in Squid-3 until fixes
>-# from the 2.x series are backported to 3.x.
>-# storage_schemes+=	coss
>+# COSS is currently disabled in Squid-3 until fixes from the 2.x series are
>+# backported to 3.x.
>+#storage_schemes+=	coss
> .endif
> CONFIGURE_ARGS+=	--enable-storeio="${storage_schemes}"
> 
> # Other options set via 'make config':
> 
>+.if defined(WITHOUT_SQUID_IPV6) || defined(WITHOUT_IPV6)
>+CONFIGURE_ARGS+=	--disable-ipv6
>+.endif
> .if defined(WITH_SQUID_DELAY_POOLS)
> CONFIGURE_ARGS+=	--enable-delay-pools
> .endif
> .if defined(WITHOUT_SQUID_SNMP)
> CONFIGURE_ARGS+=	--disable-snmp
> .endif
>-.if defined(WITHOUT_SQUID_CARP)
>-CONFIGURE_ARGS+=	--disable-carp
>-.endif
> .if defined(WITH_SQUID_SSL)
> # we need to .include bsd.openssl.mk manually here.because USE_OPENSSL only
> # works when it is defined before bsd.port{.pre}.mk is .included.
>@@ -289,8 +314,8 @@
> CONFIGURE_ARGS+=	--disable-internal-dns
> libexec+=	dnsserver
> .endif
>-.if defined(WITH_SQUID_HTCP)
>-CONFIGURE_ARGS+=	--enable-htcp
>+.if defined(WITHOUT_SQUID_HTCP)
>+CONFIGURE_ARGS+=	--disable-htcp
> .endif
> .if defined(WITH_SQUID_VIA_DB)
> CONFIGURE_ARGS+=	--enable-forw-via-db
>@@ -328,6 +353,15 @@
> .if defined(WITH_SQUID_IPFILTER)
> CONFIGURE_ARGS+=	--enable-ipf-transparent
> .endif
>+.if defined(WITH_SQUID_FOLLOW_XFF)
>+CONFIGURE_ARGS+=	--enable-follow-x-forwarded-for
>+.endif
>+.if defined(WITH_SQUID_ECAP)
>+CONFIGURE_ARGS+=	--enable-ecap
>+LIB_DEPENDS+=	ecap:${PORTSDIR}/www/libecap
>+CFLAGS+=	-I${LOCALBASE}/include
>+LDFLAGS+=	-L${LOCALBASE}/lib
>+.endif
> .if defined(WITH_SQUID_ICAP)
> CONFIGURE_ARGS+=	--enable-icap-client
> .endif
>@@ -360,20 +394,6 @@
> CONFIGURE_ARGS+=	--disable-optimizations
> WITH_DEBUG?=		yes
> .endif
>-# Languages:
>-#
>-# If you do not define SQUID_LANGUAGES yourself, all available language files
>-# will be installed; the default language will be English.
>-SQUID_LANGUAGES?=	Armenian Azerbaijani Bulgarian Catalan Czech Danish \
>-			Dutch English Estonian Finnish French German Greek \
>-			Hebrew Hungarian Italian Japanese Korean Lithuanian \
>-			Polish Portuguese Romanian Russian-1251 Russian-koi8-r \
>-			Serbian Simplify_Chinese Slovak Spanish Swedish \
>-			Traditional_Chinese Turkish Ukrainian-1251 \
>-			Ukrainian-koi8-u Ukrainian-utf8
>-SQUID_DEFAULT_LANG?=	templates
>-CONFIGURE_ARGS+=	--enable-err-languages="${SQUID_LANGUAGES}" \
>-			--enable-default-err-language=${SQUID_DEFAULT_LANG}
> 
> # Finally, add additional user specified configuration options:
> CONFIGURE_ARGS+=	${SQUID_CONFIGURE_ARGS}
>@@ -386,10 +406,15 @@
> PLIST_FILES=	${etc_files:S,^,etc/,} ${icon_files:S,^,etc/squid/icons/,} \
> 		${libexec:S,^,libexec/squid/,} ${sbin:S,^,sbin/,}
> 
>-.for d in ${SQUID_LANGUAGES} templates
>+.for d in ${error_dirs_old}
> PLIST_DIRS+=	etc/squid/errors/${d}
> PLIST_FILES+=	${error_files:S,^,etc/squid/errors/${d}/,}
> .endfor
>+.for d in ${error_dirs_new}
>+PLIST_DIRS+=	etc/squid/errors/${d}
>+PLIST_FILES+=	${error_files:S,^,etc/squid/errors/${d}/,}
>+PLIST_FILES+=	${error_files_new_only:S,^,etc/squid/errors/${d}/,}
>+.endfor
> PLIST_DIRS+=	etc/squid/errors etc/squid squid/logs squid/cache squid
> 
> post-patch:
>@@ -403,13 +428,6 @@
> # Prevent installation of .orig files by deleting them.
> 	@${FIND} ${WRKSRC} -name '*.bak' -delete
> 	@${FIND} ${WRKSRC} -name '*.orig' -delete
>-# XXX:
>-# Remove error pages that were prematurely integrated into 3.0.STABLE.
>-# This is done to keep the package list manageable by installing the same
>-# set of error files for every language:
>-	@for d in Ukrainian-1251 Ukrainian-koi8-u Ukrainian-utf8 templates; \
>-		do ${RM} -f ${WRKSRC}/errors/$${d}/ERR_SECURE_CONNECT_FAIL; \
>-	 done
> 
> pre-su-install:
> 	@${SETENV} ${SCRIPTS_ENV} PKG_PREFIX=${PREFIX} \
>Index: distinfo
>===================================================================
>--- distinfo	(.../squid30)	(revision 1611)
>+++ distinfo	(.../squid31)	(revision 1611)
>@@ -1,3 +1,3 @@
>-MD5 (squid3.0/squid-3.0.STABLE15.tar.bz2) = 5830a3c8e8d64f3483b38093da2a96fa
>-SHA256 (squid3.0/squid-3.0.STABLE15.tar.bz2) = 31fe133debe4f0876c65250c2e8588f5616f1174954ec7371cb860bedc752caf
>-SIZE (squid3.0/squid-3.0.STABLE15.tar.bz2) = 1782217
>+MD5 (squid3.1/squid-3.1.0.8.tar.bz2) = 468fc9677a8771f9423ddb15fcd2e03d
>+SHA256 (squid3.1/squid-3.1.0.8.tar.bz2) = 57964f7d5f9fe9cf37a4178807c169b714335ce132f7f53aee894a638a19d735
>+SIZE (squid3.1/squid-3.1.0.8.tar.bz2) = 2345063
>Index: pkg-descr
>===================================================================
>--- pkg-descr	(.../squid30)	(revision 1611)
>+++ pkg-descr	(.../squid31)	(revision 1611)
>@@ -7,4 +7,7 @@
> By using the lightweight Internet Cache Protocol, Squid caches can be
> arranged in a hierarchy or mesh for additional bandwidth savings.
> 
>+NOTE: This is a beta version. Stable Squid versions are located in
>+      www/squid (2.7 series) and www/squid30 (3.0 series).
>+
> WWW: http://www.squid-cache.org/
>Index: files/pkg-deinstall.in
>===================================================================
>--- files/pkg-deinstall.in	(.../squid30)	(revision 1611)
>+++ files/pkg-deinstall.in	(.../squid31)	(revision 1611)
>@@ -8,7 +8,7 @@
> case $2 in
> DEINSTALL)
> 	cd ${PKG_PREFIX}/etc/squid || exit 1
>-	for f in cachemgr.conf mime.conf msntauth.conf squid.conf; do
>+	for f in cachemgr.conf errorpage.css mime.conf msntauth.conf squid.conf; do
> 		cmp -s -z ${f} ${f}.default && rm ${f}
> 	done
> 	;;
>Index: files/pkg-message.in
>===================================================================
>--- files/pkg-message.in	(.../squid30)	(revision 1611)
>+++ files/pkg-message.in	(.../squid31)	(revision 1611)
>@@ -24,8 +24,11 @@
> 
>      Note:
>      If you just updated your Squid installation from an earlier version,
>-     make sure to check your Squid configuration against the 3.0 default
>+     make sure to check your Squid configuration against the 3.1 default
>      configuration file %%PREFIX%%/etc/squid/squid.conf.default.
>+     
>+     %%PREFIX%%/etc/squid/squid.conf.documented is a fully annotated
>+     configuration file you can consult for further reference.
> 
>      Additionally, you should check your configuration by calling
>      'squid -f /path/to/squid.conf -k parse' before starting Squid.
>Index: files/pkg-install.in
>===================================================================
>--- files/pkg-install.in	(.../squid30)	(revision 1611)
>+++ files/pkg-install.in	(.../squid31)	(revision 1611)
>@@ -50,6 +50,18 @@
> 		echo "I will use the existing user '${squid_user}':"
> 	fi
> 	pw usershow ${squid_user}
>+	# Starting with 3.1, Squid's PID file moved from
>+	# ${squid_base}/logs/squid.pid to ${squid_base}/squid.pid.
>+	# Since we usually start the Squid master process as ${squid_user},
>+	# make sure that ${squid_base} is writable for it.
>+	if [ ! -d ${squid_base} ]; then
>+		echo "Creating ${squid_base}..."
>+		install -d -o root -g ${squid_group} \
>+		    -m 0775 ${squid_base}
>+	else
>+		chgrp ${squid_group} ${squid_base}
>+		chmod g+w ${squid_base}
>+	fi
> 	for dir in cache logs; do
> 	if [ ! -d ${squid_base}/${dir} ]; then
> 		echo "Creating ${squid_base}/${dir}..."
>@@ -64,7 +76,7 @@
> 	fi
> 	;;
> POST-INSTALL)
>-	for file in cachemgr.conf mime.conf squid.conf; do
>+	for file in cachemgr.conf errorpage.css mime.conf msntauth.conf squid.conf; do
> 		if [ ! -f ${squid_confdir}/${file} \
> 		    -a -f ${squid_confdir}/${file}.default ]; then
> 			echo "Creating ${file} from default..."
>Index: files/squid.in
>===================================================================
>--- files/squid.in	(.../squid30)	(revision 1611)
>+++ files/squid.in	(.../squid31)	(revision 1611)
>@@ -37,10 +37,9 @@
> 
> load_rc_config ${name}
> 
>-squid_chdir=${squid_chdir:-"%%PREFIX%%/squid/logs"}
>+squid_chdir=${squid_chdir:-"%%PREFIX%%/squid"}
> squid_enable=${squid_enable:-"NO"}
>-squid_flags=${squid_flags-"-D"}
>-squid_pidfile=${squid_pidfile:-"%%PREFIX%%/squid/logs/squid.pid"}
>+squid_pidfile=${squid_pidfile:-"%%PREFIX%%/squid/squid.pid"}
> squid_user=${squid_user:-%%SQUID_UID%%}
> default_config=%%PREFIX%%/etc/squid/squid.conf
> 
>Index: files/patch-squid_kerb_auth
>===================================================================
>--- files/patch-squid_kerb_auth	(.../squid30)	(revision 1611)
>+++ files/patch-squid_kerb_auth	(.../squid31)	(revision 1611)
>@@ -1,490 +0,0 @@
>-This file contains various patches that in general try to enable the
>-compilation of the squid_kerb_auth authentication helper program on
>-all versions of FreeBSD that are currently supported by the FreeBSD
>-ports framework where Heimdal is part of the base system.
>-
>---- configure.orig	2008-12-23 05:19:34.000000000 +0100
>-+++ configure	2008-12-24 15:05:33.000000000 +0100
>-@@ -964,6 +964,9 @@
>- NTLM_AUTH_HELPERS
>- NEGOTIATE_AUTH_HELPERS
>- DIGEST_AUTH_HELPERS
>-+KRB5CONFIG
>-+KERBLIBS
>-+KERBINC
>- EXTERNAL_ACL_HELPERS
>- LIBSASL
>- ENABLE_UNLINKD_TRUE
>-@@ -23261,6 +23264,368 @@
>- fi
>- 
>- 
>-+
>-+if `echo "$NEGOTIATE_AUTH_HELPERS" | grep -q squid_kerb_auth`; then
>-+    # Extract the first word of "krb5-config", so it can be a program name with args.
>-+set dummy krb5-config; ac_word=$2
>-+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
>-+$as_echo_n "checking for $ac_word... " >&6; }
>-+if test "${ac_cv_path_KRB5CONFIG+set}" = set; then
>-+  $as_echo_n "(cached) " >&6
>-+else
>-+  case $KRB5CONFIG in
>-+  [\\/]* | ?:[\\/]*)
>-+  ac_cv_path_KRB5CONFIG="$KRB5CONFIG" # Let the user override the test with a path.
>-+  ;;
>-+  *)
>-+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
>-+for as_dir in $PATH
>-+do
>-+  IFS=$as_save_IFS
>-+  test -z "$as_dir" && as_dir=.
>-+  for ac_exec_ext in '' $ac_executable_extensions; do
>-+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
>-+    ac_cv_path_KRB5CONFIG="$as_dir/$ac_word$ac_exec_ext"
>-+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
>-+    break 2
>-+  fi
>-+done
>-+done
>-+IFS=$as_save_IFS
>-+
>-+  test -z "$ac_cv_path_KRB5CONFIG" && ac_cv_path_KRB5CONFIG="false"
>-+  ;;
>-+esac
>-+fi
>-+KRB5CONFIG=$ac_cv_path_KRB5CONFIG
>-+if test -n "$KRB5CONFIG"; then
>-+  { $as_echo "$as_me:$LINENO: result: $KRB5CONFIG" >&5
>-+$as_echo "$KRB5CONFIG" >&6; }
>-+else
>-+  { $as_echo "$as_me:$LINENO: result: no" >&5
>-+$as_echo "no" >&6; }
>-+fi
>-+
>-+
>-+    if test -z "$KRB5CONFIG"; then
>-+	{ { $as_echo "$as_me:$LINENO: error: sorry" >&5
>-+$as_echo "$as_me: error: sorry" >&2;}
>-+   { (exit need krb5-config to determine compilation settings); exit need krb5-config to determine compilation settings; }; }
>-+    else
>-+	KERBLIBS=`$KRB5CONFIG --libs gssapi`
>-+	KERBINC=`$KRB5CONFIG --cflags`
>-+
>-+
>-+    fi
>-+
>-+for ac_header in gssapi/gssapi.h
>-+do
>-+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
>-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
>-+  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
>-+$as_echo_n "checking for $ac_header... " >&6; }
>-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
>-+  $as_echo_n "(cached) " >&6
>-+fi
>-+ac_res=`eval 'as_val=${'$as_ac_Header'}
>-+		 $as_echo "$as_val"'`
>-+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
>-+$as_echo "$ac_res" >&6; }
>-+else
>-+  # Is the header compilable?
>-+{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
>-+$as_echo_n "checking $ac_header usability... " >&6; }
>-+cat >conftest.$ac_ext <<_ACEOF
>-+/* confdefs.h.  */
>-+_ACEOF
>-+cat confdefs.h >>conftest.$ac_ext
>-+cat >>conftest.$ac_ext <<_ACEOF
>-+/* end confdefs.h.  */
>-+$ac_includes_default
>-+#include <$ac_header>
>-+_ACEOF
>-+rm -f conftest.$ac_objext
>-+if { (ac_try="$ac_compile"
>-+case "(($ac_try" in
>-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
>-+  *) ac_try_echo=$ac_try;;
>-+esac
>-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
>-+$as_echo "$ac_try_echo") >&5
>-+  (eval "$ac_compile") 2>conftest.er1
>-+  ac_status=$?
>-+  grep -v '^ *+' conftest.er1 >conftest.err
>-+  rm -f conftest.er1
>-+  cat conftest.err >&5
>-+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
>-+  (exit $ac_status); } && {
>-+	 test -z "$ac_c_werror_flag" ||
>-+	 test ! -s conftest.err
>-+       } && test -s conftest.$ac_objext; then
>-+  ac_header_compiler=yes
>-+else
>-+  $as_echo "$as_me: failed program was:" >&5
>-+sed 's/^/| /' conftest.$ac_ext >&5
>-+
>-+	ac_header_compiler=no
>-+fi
>-+
>-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
>-+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
>-+$as_echo "$ac_header_compiler" >&6; }
>-+
>-+# Is the header present?
>-+{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
>-+$as_echo_n "checking $ac_header presence... " >&6; }
>-+cat >conftest.$ac_ext <<_ACEOF
>-+/* confdefs.h.  */
>-+_ACEOF
>-+cat confdefs.h >>conftest.$ac_ext
>-+cat >>conftest.$ac_ext <<_ACEOF
>-+/* end confdefs.h.  */
>-+#include <$ac_header>
>-+_ACEOF
>-+if { (ac_try="$ac_cpp conftest.$ac_ext"
>-+case "(($ac_try" in
>-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
>-+  *) ac_try_echo=$ac_try;;
>-+esac
>-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
>-+$as_echo "$ac_try_echo") >&5
>-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
>-+  ac_status=$?
>-+  grep -v '^ *+' conftest.er1 >conftest.err
>-+  rm -f conftest.er1
>-+  cat conftest.err >&5
>-+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
>-+  (exit $ac_status); } >/dev/null && {
>-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
>-+	 test ! -s conftest.err
>-+       }; then
>-+  ac_header_preproc=yes
>-+else
>-+  $as_echo "$as_me: failed program was:" >&5
>-+sed 's/^/| /' conftest.$ac_ext >&5
>-+
>-+  ac_header_preproc=no
>-+fi
>-+
>-+rm -f conftest.err conftest.$ac_ext
>-+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
>-+$as_echo "$ac_header_preproc" >&6; }
>-+
>-+# So?  What about this header?
>-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
>-+  yes:no: )
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
>-+    ac_header_preproc=yes
>-+    ;;
>-+  no:yes:* )
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
>-+$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
>-+$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
>-+    ( cat <<\_ASBOX
>-+## ----------------------------------------------- ##
>-+## Report this to http://www.squid-cache.org/bugs/ ##
>-+## ----------------------------------------------- ##
>-+_ASBOX
>-+     ) | sed "s/^/$as_me: WARNING:     /" >&2
>-+    ;;
>-+esac
>-+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
>-+$as_echo_n "checking for $ac_header... " >&6; }
>-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
>-+  $as_echo_n "(cached) " >&6
>-+else
>-+  eval "$as_ac_Header=\$ac_header_preproc"
>-+fi
>-+ac_res=`eval 'as_val=${'$as_ac_Header'}
>-+		 $as_echo "$as_val"'`
>-+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
>-+$as_echo "$ac_res" >&6; }
>-+
>-+fi
>-+if test `eval 'as_val=${'$as_ac_Header'}
>-+		 $as_echo "$as_val"'` = yes; then
>-+  cat >>confdefs.h <<_ACEOF
>-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
>-+_ACEOF
>-+
>-+fi
>-+
>-+done
>-+
>-+    if test x"$ac_cv_header_gssapi_gssapi_h" != x"yes"; then
>-+
>-+for ac_header in gssapi.h
>-+do
>-+as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
>-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
>-+  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
>-+$as_echo_n "checking for $ac_header... " >&6; }
>-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
>-+  $as_echo_n "(cached) " >&6
>-+fi
>-+ac_res=`eval 'as_val=${'$as_ac_Header'}
>-+		 $as_echo "$as_val"'`
>-+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
>-+$as_echo "$ac_res" >&6; }
>-+else
>-+  # Is the header compilable?
>-+{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
>-+$as_echo_n "checking $ac_header usability... " >&6; }
>-+cat >conftest.$ac_ext <<_ACEOF
>-+/* confdefs.h.  */
>-+_ACEOF
>-+cat confdefs.h >>conftest.$ac_ext
>-+cat >>conftest.$ac_ext <<_ACEOF
>-+/* end confdefs.h.  */
>-+$ac_includes_default
>-+#include <$ac_header>
>-+_ACEOF
>-+rm -f conftest.$ac_objext
>-+if { (ac_try="$ac_compile"
>-+case "(($ac_try" in
>-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
>-+  *) ac_try_echo=$ac_try;;
>-+esac
>-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
>-+$as_echo "$ac_try_echo") >&5
>-+  (eval "$ac_compile") 2>conftest.er1
>-+  ac_status=$?
>-+  grep -v '^ *+' conftest.er1 >conftest.err
>-+  rm -f conftest.er1
>-+  cat conftest.err >&5
>-+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
>-+  (exit $ac_status); } && {
>-+	 test -z "$ac_c_werror_flag" ||
>-+	 test ! -s conftest.err
>-+       } && test -s conftest.$ac_objext; then
>-+  ac_header_compiler=yes
>-+else
>-+  $as_echo "$as_me: failed program was:" >&5
>-+sed 's/^/| /' conftest.$ac_ext >&5
>-+
>-+	ac_header_compiler=no
>-+fi
>-+
>-+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
>-+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
>-+$as_echo "$ac_header_compiler" >&6; }
>-+
>-+# Is the header present?
>-+{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
>-+$as_echo_n "checking $ac_header presence... " >&6; }
>-+cat >conftest.$ac_ext <<_ACEOF
>-+/* confdefs.h.  */
>-+_ACEOF
>-+cat confdefs.h >>conftest.$ac_ext
>-+cat >>conftest.$ac_ext <<_ACEOF
>-+/* end confdefs.h.  */
>-+#include <$ac_header>
>-+_ACEOF
>-+if { (ac_try="$ac_cpp conftest.$ac_ext"
>-+case "(($ac_try" in
>-+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
>-+  *) ac_try_echo=$ac_try;;
>-+esac
>-+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
>-+$as_echo "$ac_try_echo") >&5
>-+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
>-+  ac_status=$?
>-+  grep -v '^ *+' conftest.er1 >conftest.err
>-+  rm -f conftest.er1
>-+  cat conftest.err >&5
>-+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
>-+  (exit $ac_status); } >/dev/null && {
>-+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
>-+	 test ! -s conftest.err
>-+       }; then
>-+  ac_header_preproc=yes
>-+else
>-+  $as_echo "$as_me: failed program was:" >&5
>-+sed 's/^/| /' conftest.$ac_ext >&5
>-+
>-+  ac_header_preproc=no
>-+fi
>-+
>-+rm -f conftest.err conftest.$ac_ext
>-+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
>-+$as_echo "$ac_header_preproc" >&6; }
>-+
>-+# So?  What about this header?
>-+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
>-+  yes:no: )
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
>-+    ac_header_preproc=yes
>-+    ;;
>-+  no:yes:* )
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
>-+$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
>-+$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
>-+    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
>-+$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
>-+    ( cat <<\_ASBOX
>-+## ----------------------------------------------- ##
>-+## Report this to http://www.squid-cache.org/bugs/ ##
>-+## ----------------------------------------------- ##
>-+_ASBOX
>-+     ) | sed "s/^/$as_me: WARNING:     /" >&2
>-+    ;;
>-+esac
>-+{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
>-+$as_echo_n "checking for $ac_header... " >&6; }
>-+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
>-+  $as_echo_n "(cached) " >&6
>-+else
>-+  eval "$as_ac_Header=\$ac_header_preproc"
>-+fi
>-+ac_res=`eval 'as_val=${'$as_ac_Header'}
>-+		 $as_echo "$as_val"'`
>-+	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
>-+$as_echo "$ac_res" >&6; }
>-+
>-+fi
>-+if test `eval 'as_val=${'$as_ac_Header'}
>-+		 $as_echo "$as_val"'` = yes; then
>-+  cat >>confdefs.h <<_ACEOF
>-+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
>-+_ACEOF
>-+
>-+else
>-+  { { $as_echo "$as_me:$LINENO: error: neither <gssapi/gssapi.h> nor <gssapi.h> found" >&5
>-+$as_echo "$as_me: error: neither <gssapi/gssapi.h> nor <gssapi.h> found" >&2;}
>-+   { (exit 1); exit 1; }; }
>-+
>-+fi
>-+
>-+done
>-+
>-+    fi
>-+fi
>-+
>- # Check whether --enable-ntlm-fail-open was given.
>- if test "${enable_ntlm_fail_open+set}" = set; then
>-   enableval=$enable_ntlm_fail_open;  if test "$enableval" = "yes" ; then
>---- include/autoconf.h.in.orig	2008-12-23 05:19:29.000000000 +0100
>-+++ include/autoconf.h.in	2008-12-24 15:05:33.000000000 +0100
>-@@ -188,6 +188,12 @@
>- /* Define to 1 if you have the `htole16' function. */
>- #undef HAVE_HTOLE16
>- 
>-+/* Define to 1 if you have the <gssapi/gssapi.h> header file. */
>-+#undef HAVE_GSSAPI_GSSAPI_H
>-+
>-+/* Define to 1 if you have the <gssapi.h> header file. */
>-+#undef HAVE_GSSAPI_H
>-+
>- /* Define to 1 if you have the `initgroups' function. */
>- #undef HAVE_INITGROUPS
>- 
>---- helpers/negotiate_auth/squid_kerb_auth/Makefile.in.orig	2008-12-23 05:19:26.000000000 +0100
>-+++ helpers/negotiate_auth/squid_kerb_auth/Makefile.in	2008-12-24 15:05:33.000000000 +0100
>-@@ -154,6 +154,18 @@
>- INSTALL_PROGRAM = @INSTALL_PROGRAM@
>- INSTALL_SCRIPT = @INSTALL_SCRIPT@
>- INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
>-+#-L$(top_builddir)/lib -lmiscutil $(XTRA_LIBS)
>-+
>-+# HEIMDAL
>-+#KERBINC = -DHEIMDAL -I/usr/include/heimdal
>-+#KERBLIBS = -lgssapi -lkrb5 -lcom_err -lasn1 -lroken
>-+
>-+# MIT
>-+#KERBINC = 
>-+#KERBLIBS = -lgssapi_krb5 -lkrb5 -lcom_err
>-+KERBINC = -DHEIMDAL @KERBINC@
>-+KERBLIBS = @KERBLIBS@
>-+KRB5CONFIG = @KRB5CONFIG@
>- LDFLAGS = @LDFLAGS@
>- LIBADD_DL = @LIBADD_DL@
>- LIBOBJS = @LIBOBJS@
>-@@ -305,15 +317,6 @@
>- squid_kerb_auth_SOURCES = $(SOURCE) $(SPNEGO)
>- #-I$(top_srcdir)/include -I$(top_srcdir)/src
>- LDADD = $(KERBLIBS)
>--#-L$(top_builddir)/lib -lmiscutil $(XTRA_LIBS)
>--
>--# HEIMDAL
>--#KERBINC = -DHEIMDAL -I/usr/include/heimdal
>--#KERBLIBS = -lgssapi -lkrb5 -lcom_err -lasn1 -lroken
>--
>--# MIT
>--KERBINC = 
>--KERBLIBS = -lgssapi_krb5 -lkrb5 -lcom_err
>- all: all-am
>- 
>- .SUFFIXES:
>---- helpers/negotiate_auth/squid_kerb_auth/squid_kerb_auth.c.orig	2008-12-23 05:19:29.000000000 +0100
>-+++ helpers/negotiate_auth/squid_kerb_auth/squid_kerb_auth.c	2008-12-24 15:05:33.000000000 +0100
>-@@ -24,6 +24,7 @@
>- /*
>-  * Hosted at http://sourceforge.net/projects/squidkerbauth
>-  */
>-+#include "config.h"
>- #include <string.h>
>- #include <stdio.h>
>- #include <stdlib.h>
>-@@ -31,6 +32,7 @@
>- #include <unistd.h>
>- #include <time.h>
>- #include <sys/time.h>
>-+#include <sys/param.h>
>- 
>- #include "base64.h"
>- #ifndef HAVE_SPNEGO
>-@@ -51,7 +53,11 @@
>- #define PROGRAM "squid_kerb_auth"
>- 
>- #ifdef HEIMDAL
>-+#ifdef HAVE_GSSAPI_GSSAPI_H
>-+#include <gssapi/gssapi.h>
>-+#else
>- #include <gssapi.h>
>-+#endif
>- #define gss_nt_service_name GSS_C_NT_HOSTBASED_SERVICE
>- #else
>- #include <gssapi/gssapi.h>
>---- helpers/negotiate_auth/squid_kerb_auth/spnegohelp/derparse.c.orig	2009-03-28 17:01:45.000000000 +0100
>-+++ helpers/negotiate_auth/squid_kerb_auth/spnegohelp/derparse.c	2009-03-28 17:06:55.000000000 +0100
>-@@ -22,12 +22,19 @@
>- //
>- /////////////////////////////////////////////////////////////
>- 
>-+#include "config.h"
>- #include <stdlib.h>
>- #include <stdio.h>
>- #include <memory.h>
>- #include "spnego.h"
>- #include "derparse.h"
>- 
>-+#ifdef WORDS_BIGENDIAN
>-+#undef __LITTLE_ENDIAN__
>-+#else
>-+#define __LITTLE_ENDIAN__ 1
>-+#endif
>-+
>- //
>- // The GSS Mechanism OID enumeration values (SPNEGO_MECH_OID) control which offset in
>- // the array below, that a mechanism can be found.

Actions: View | Diff

Attachments on bug 135572: 96867