Attachment 100402 Details for Bug 139679 – file.txt

file.txt

file.txt (text/plain), 13.47 KB, created by Alexander Shevchenko on 2009-10-16 14:30:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexander Shevchenko

Created: 2009-10-16 14:30:06 UTC

Size: 13.47 KB

patch

obsolete

>Copyright (c) 1992-2009 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 8.0-RC1 #0: Thu Sep 17 18:50:57 UTC 2009
>    root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Xeon(R) CPU           E5530  @ 2.40GHz (2399.99-MHz K8-class CPU)
>  Origin = "GenuineIntel"  Id = 0x106a5  Stepping = 5
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
>  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
>  AMD Features2=0x1<LAHF>
>  TSC: P-state invariant
>real memory  = 6442450944 (6144 MB)
>avail memory = 6086184960 (5804 MB)
>ACPI APIC Table: <INTEL  S5520SC >
>FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
> cpu2 (AP): APIC ID:  2
> cpu3 (AP): APIC ID:  3
> cpu4 (AP): APIC ID:  4
> cpu5 (AP): APIC ID:  5
> cpu6 (AP): APIC ID:  6
> cpu7 (AP): APIC ID:  7
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>ioapic1 <Version 2.0> irqs 24-47 on motherboard
>lapic0: Forcing LINT1 to edge trigger
>kbd1 at kbdmux0
>acpi0: <INTEL S5520SC> on motherboard
>acpi0: [ITHREAD]
>acpi0: Power Button (fixed)
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 900
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>igb0: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x2020-0x203f mem 0xc4a20000-0xc4a3ffff,0xc4a44000-0xc4a47fff irq 40 at device 0.0 on pci1
>igb0: Using MSIX interrupts with 3 vectors
>igb0: [ITHREAD]
>igb0: [ITHREAD]
>igb0: [ITHREAD]
>igb0: Ethernet address: 00:15:17:af:cd:0c
>igb1: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x2000-0x201f mem 0xc4a00000-0xc4a1ffff,0xc4a40000-0xc4a43fff irq 28 at device 0.1 on pci1
>igb1: Using MSIX interrupts with 3 vectors
>igb1: [ITHREAD]
>igb1: [ITHREAD]
>igb1: [ITHREAD]
>igb1: Ethernet address: 00:15:17:af:cd:0d
>pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xc2000000-0xc2ffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff irq 24 at device 0.0 on pci2
>pcib3: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
>pci0: <base peripheral> at device 22.0 (no driver attached)
>pci0: <base peripheral> at device 22.1 (no driver attached)
>pci0: <base peripheral> at device 22.2 (no driver attached)
>pci0: <base peripheral> at device 22.3 (no driver attached)
>pci0: <base peripheral> at device 22.4 (no driver attached)
>pci0: <base peripheral> at device 22.5 (no driver attached)
>pci0: <base peripheral> at device 22.6 (no driver attached)
>pci0: <base peripheral> at device 22.7 (no driver attached)
>uhci0: <UHCI (generic) USB controller> port 0x30e0-0x30ff irq 19 at device 26.0 on pci0
>uhci0: [ITHREAD]
>uhci0: LegSup = 0x103f
>usbus0: <UHCI (generic) USB controller> on uhci0
>uhci1: <UHCI (generic) USB controller> port 0x30c0-0x30df irq 19 at device 26.1 on pci0
>uhci1: [ITHREAD]
>uhci1: LegSup = 0x003f
>usbus1: <UHCI (generic) USB controller> on uhci1
>uhci2: <UHCI (generic) USB controller> port 0x30a0-0x30bf irq 19 at device 26.2 on pci0
>uhci2: [ITHREAD]
>uhci2: LegSup = 0x003f
>usbus2: <UHCI (generic) USB controller> on uhci2
>ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc4b26000-0xc4b263ff irq 19 at device 26.7 on pci0
>ehci0: [ITHREAD]
>usbus3: EHCI version 1.0
>usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
>pci0: <multimedia, HDA> at device 27.0 (no driver attached)
>pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
>pci5: <ACPI PCI bus> on pcib5
>pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
>pci6: <ACPI PCI bus> on pcib6
>uhci3: <UHCI (generic) USB controller> port 0x3080-0x309f irq 16 at device 29.0 on pci0
>uhci3: [ITHREAD]
>uhci3: LegSup = 0x003f
>usbus4: <UHCI (generic) USB controller> on uhci3
>uhci4: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device 29.1 on pci0
>uhci4: [ITHREAD]
>uhci4: LegSup = 0x003f
>usbus5: <UHCI (generic) USB controller> on uhci4
>uhci5: <UHCI (generic) USB controller> port 0x3040-0x305f irq 16 at device 29.2 on pci0
>uhci5: [ITHREAD]
>uhci5: LegSup = 0x003f
>usbus6: <UHCI (generic) USB controller> on uhci5
>ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc4b25000-0xc4b253ff irq 16 at device 29.7 on pci0
>ehci1: [ITHREAD]
>usbus7: EHCI version 1.0
>usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
>pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci7: <ACPI PCI bus> on pcib7
>fwohci0: <Texas Instruments TSB43AB22/A> mem 0xc4904000-0xc49047ff,0xc4900000-0xc4903fff irq 17 at device 1.0 on pci7
>fwohci0: [ITHREAD]
>fwohci0: OHCI version 1.10 (ROM=0)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 00:90:27:00:02:58:ce:0c
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>dcons_crom0: <dcons configuration ROM> on firewire0
>dcons_crom0: bus_addr 0x173c000
>fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 02:90:27:58:ce:0c
>fwe0: Ethernet address: 02:90:27:58:ce:0c
>fwip0: <IP over FireWire> on firewire0
>fwip0: Firewire address: 00:90:27:00:02:58:ce:0c @ 0xfffe00000000, S400, maxrec 2048
>sbp0: <SBP-2/SCSI over FireWire> on firewire0
>fwohci0: Initiate bus reset
>fwohci0: fwohci_intr_core: BUS reset
>fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH10 SATA300 controller> port 0x3108-0x310f,0x3114-0x3117,0x3100-0x3107,0x3110-0x3113,0x3020-0x303f mem 0xc4b24000-0xc4b247ff irq 18 at device 31.2 on pci0
>atapci0: [ITHREAD]
>atapci0: AHCI called from vendor specific driver
>atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported
>ata2: <ATA channel 0> on atapci0
>ata2: [ITHREAD]
>ata3: <ATA channel 1> on atapci0
>ata3: [ITHREAD]
>ata4: <ATA channel 2> on atapci0
>ata4: [ITHREAD]
>ata5: <ATA channel 3> on atapci0
>ata5: [ITHREAD]
>ata6: <ATA channel 4> on atapci0
>ata6: [ITHREAD]
>ata7: <ATA channel 5> on atapci0
>ata7: [ITHREAD]
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>acpi_button0: <Sleep Button> on acpi0
>atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>uart0: [FILTER]
>uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
>uart1: [FILTER]
>cpu0: <ACPI CPU> on acpi0
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>cpu1: <ACPI CPU> on acpi0
>device_attach: acpi_perf1 attach returned 6
>device_attach: acpi_perf1 attach returned 6
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 12
>device_attach: est1 attach returned 6
>p4tcc1: <CPU Frequency Thermal Control> on cpu1
>cpu2: <ACPI CPU> on acpi0
>est2: <Enhanced SpeedStep Frequency Control> on cpu2
>p4tcc2: <CPU Frequency Thermal Control> on cpu2
>cpu3: <ACPI CPU> on acpi0
>device_attach: acpi_perf3 attach returned 6
>device_attach: acpi_perf3 attach returned 6
>est3: <Enhanced SpeedStep Frequency Control> on cpu3
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 12
>device_attach: est3 attach returned 6
>p4tcc3: <CPU Frequency Thermal Control> on cpu3
>cpu4: <ACPI CPU> on acpi0
>est4: <Enhanced SpeedStep Frequency Control> on cpu4
>p4tcc4: <CPU Frequency Thermal Control> on cpu4
>cpu5: <ACPI CPU> on acpi0
>device_attach: acpi_perf5 attach returned 6
>device_attach: acpi_perf5 attach returned 6
>est5: <Enhanced SpeedStep Frequency Control> on cpu5
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 12
>device_attach: est5 attach returned 6
>p4tcc5: <CPU Frequency Thermal Control> on cpu5
>cpu6: <ACPI CPU> on acpi0
>est6: <Enhanced SpeedStep Frequency Control> on cpu6
>p4tcc6: <CPU Frequency Thermal Control> on cpu6
>cpu7: <ACPI CPU> on acpi0
>device_attach: acpi_perf7 attach returned 6
>device_attach: acpi_perf7 attach returned 6
>est7: <Enhanced SpeedStep Frequency Control> on cpu7
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 12
>device_attach: est7 attach returned 6
>p4tcc7: <CPU Frequency Thermal Control> on cpu7
>orm0: <ISA Option ROMs> at iomem 0xcd000-0xcdfff,0xce000-0xcefff,0xcf000-0xd4fff on isa0
>atkbd: unable to set the command byte.
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbd0: [ITHREAD]
>psm0: unable to set the command byte.
>ppc0: cannot reserve I/O port range
>Timecounters tick every 1.000 msec
>firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
>firewire0: bus manager 0 
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 12Mbps Full Speed USB v1.0
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>usbus4: 12Mbps Full Speed USB v1.0
>usbus5: 12Mbps Full Speed USB v1.0
>usbus6: 12Mbps Full Speed USB v1.0
>usbus7: 480Mbps High Speed USB v2.0
>ugen0.1: <Intel> at usbus0
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <Intel> at usbus1
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ugen2.1: <Intel> at usbus2
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen3.1: <Intel> at usbus3
>uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>ugen4.1: <Intel> at usbus4
>uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>ugen5.1: <Intel> at usbus5
>uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
>ugen6.1: <Intel> at usbus6
>uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
>ugen7.1: <Intel> at usbus7
>uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
>ad4: 953869MB <Seagate ST31000340NS SN06> at ata2-master SATA150
>uhub0: 2 ports with 2 removable, self powered
>uhub1: 2 ports with 2 removable, self powered
>uhub2: 2 ports with 2 removable, self powered
>uhub4: 2 ports with 2 removable, self powered
>uhub5: 2 ports with 2 removable, self powered
>uhub6: 2 ports with 2 removable, self powered
>GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
>uhub3: 6 ports with 6 removable, self powered
>uhub7: 6 ports with 6 removable, self powered
>ad6: 953869MB <Seagate ST31000340NS SN06> at ata3-master SATA150
>ad8: 953869MB <Seagate ST31000340NS SN06> at ata4-master SATA150
>ad10: 953869MB <Seagate ST31000340NS SN06> at ata5-master SATA150
>acd0: DVDR <Optiarc DVD RW AD-5240S/1.01> at ata7-master SATA150
>ugen4.2: <BTC> at usbus4
>ukbd0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus4
>kbd2 at ukbd0
>uhid0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus4
>ar0: writing of DDF metadata is NOT supported yet
>ar0: 952720MB <DDF RAID0 (stripe 64 KB)> status: READY
>ar0: disk0 READY using ad4 at ata2-master
>ar1: writing of DDF metadata is NOT supported yet
>ar1: 2858160MB <DDF RAID0 (stripe 64 KB)> status: READY
>ar1: disk0 READY using ad6 at ata3-master
>ar1: disk1 READY using ad8 at ata4-master
>ar1: disk2 READY using ad10 at ata5-master
>lapic1: Forcing LINT1 to edge trigger
>SMP: AP CPU #1 Launched!
>lapic5: Forcing LINT1 to edge trigger
>SMP: AP CPU #5 Launched!
>lapic3: Forcing LINT1 to edge trigger
>SMP: AP CPU #3 Launched!
>lapic4: Forcing LINT1 to edge trigger
>SMP: AP CPU #4 Launched!
>lapic2: Forcing LINT1 to edge trigger
>SMP: AP CPU #2 Launched!
>lapic6: Forcing LINT1 to edge trigger
>SMP: AP CPU #6 Launched!
>lapic7: Forcing LINT1 to edge trigger
>SMP: AP CPU #7 Launched!
>ugen5.2: <No brand> at usbus5
>ukbd1: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
>ugen2.2: <American Megatrends Inc.> at usbus2
>kbd3 at ukbd1
>ukbd2: <Keyboard Interface> on usbus2
>kbd4 at ukbd2
>ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
>ums1: <Mouse Interface> on usbus2
>ums1: 3 buttons and [Z] coordinates ID=0
>ums0: 5 buttons and [XYZ] coordinates ID=1
>Trying to mount root from ufs:/dev/ar0s1a
>ugen5.3: <Logitech> at usbus5
>ums2: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 3> on usbus5
>ums2: 3 buttons and [XYZ] coordinates ID=0

Actions: View

Attachments on bug 139679: 100402