Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81089000. Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff810891f8. Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff810898a0. Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff81089ed0. Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff8108a4f8. Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff8108aba0. Preloaded elf obj module "/boot/modules/vboxdrv.ko" at 0xffffffff8108ac00. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2293846712 Hz CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-66 (2293.85-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60f81 Stepping = 1 Features=0x178bfbff Features2=0x2001 AMD Features=0xea500800 AMD Features2=0x11f L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 3221225472 (3072 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages) 0x00000000010b9000 - 0x00000000b2858fff, 2977562624 bytes (726944 pages) avail memory = 2960560128 (2823 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf8940 00014 (v0 HP ) ACPI: RSDT 0xb7f0adb5 00040 (v1 HPQOEM SLIC-MPC 06040000 LTP 00000000) ACPI: FACP 0xb7f13a92 00074 (v1 HP MCP51M 06040000 PTL_ 000F4240) ACPI: DSDT 0xb7f0adf5 08C9D (v1 HP MCP51M 06040000 MSFT 03000000) ACPI: FACS 0xb7f14fc0 00040 ACPI: SSDT 0xb7f13b06 0028A (v1 HP POWERNOW 06040000 LTP 00000001) ACPI: MCFG 0xb7f13d90 0003C (v1 HP MCFG 06040000 LTP 00000000) ACPI: HPET 0xb7f13dcc 00038 (v1 PTLTD HPETTBL 06040000 LTP 00000001) ACPI: APIC 0xb7f13e04 0005E (v1 HP APIC 06040000 LTP 00000000) ACPI: BOOT 0xb7f13e62 00028 (v1 HP $SBFTBL$ 06040000 LTP 00000001) ACPI: SLIC 0xb7f13e8a 00176 (v1 HPQOEM SLIC-MPC 06040000 LTP 00000001) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 wlan: <802.11 Link Layer> random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: null: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff8000009000 pa 0x4000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P44_ -> bus 0 dev 10 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P60_ -> bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P64_ -> bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P68_ -> bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SBA2 -> bus 0 dev 10 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P74_ -> bus 0 dev 10 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.XVR2.PCE1 -> bus 0 dev 2 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRQ -> bus 0 dev 10 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 10 11 14 15 Validation 0 255 N 0 5 7 10 11 14 15 After Disable 0 255 N 0 5 7 10 11 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 5 7 10 11 14 15 Validation 0 10 N 0 5 7 10 11 14 15 After Disable 0 255 N 0 5 7 10 11 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 10 11 14 15 Validation 0 255 N 0 5 7 10 11 14 15 After Disable 0 255 N 0 5 7 10 11 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 10 11 14 15 Validation 0 255 N 0 5 7 10 11 14 15 After Disable 0 255 N 0 5 7 10 11 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 19 Validation 0 255 N 0 19 After Disable 0 255 N 0 19 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 18 Validation 0 255 N 0 18 After Disable 0 255 N 0 18 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 16 17 20 22 23 Validation 0 255 N 0 16 17 20 22 23 After Disable 0 255 N 0 16 17 20 22 23 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 21 Validation 0 255 N 0 21 After Disable 0 255 N 0 21 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 21 Validation 0 255 N 0 21 After Disable 0 255 N 0 21 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: on acpi0 acpi_button1: on acpi0 acpi_acad0: on acpi0 battery0: on acpi0 acpi_lid0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x10de, dev=0x02f0, revid=0xa2 domain=0, bus=0, slot=0, func=0 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fa, revid=0xa2 domain=0, bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fe, revid=0xa2 domain=0, bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02f8, revid=0xa2 domain=0, bus=0, slot=0, func=3 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02f9, revid=0xa2 domain=0, bus=0, slot=0, func=4 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02ff, revid=0xa2 domain=0, bus=0, slot=0, func=5 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x027f, revid=0xa2 domain=0, bus=0, slot=0, func=6 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x027e, revid=0xa2 domain=0, bus=0, slot=0, func=7 class=05-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x02fc, revid=0xa1 domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x02fd, revid=0xa1 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 2 messages, 64 bit found-> vendor=0x10de, dev=0x0244, revid=0xa2 domain=0, bus=0, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xc2000000, size 24, enabled map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled map[1c]: type Memory, range 64, base 0xc1000000, size 24, enabled pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.LK3E:0) pci_link6: Picked IRQ 18 with weight 0 ioapic0: Changing polarity for pin 18 to high pcib0: slot 5 INTA routed to irq 18 via \\_SB_.PCI0.LK3E found-> vendor=0x10de, dev=0x0270, revid=0xa2 domain=0, bus=0, slot=9, func=0 class=05-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0260, revid=0xa3 domain=0, bus=0, slot=10, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x0264, revid=0xa3 domain=0, bus=0, slot=10, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x3040, size 6, enabled map[24]: type I/O Port, range 32, base 0x3000, size 6, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LSMB:0) pci_link8: Picked IRQ 16 with weight 0 ioapic0: Changing polarity for pin 16 to high pcib0: slot 10 INTA routed to irq 16 via \\_SB_.PCI0.LSMB found-> vendor=0x10de, dev=0x0271, revid=0xa3 domain=0, bus=0, slot=10, func=3 class=0b-40-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=11 map[10]: type Memory, range 32, base 0xc0040000, size 18, enabled pcib0: matched entry for 0.10.INTB (src \\_SB_.PCI0.LPMU:0) pci_link9: Picked IRQ 17 with weight 0 ioapic0: Changing polarity for pin 17 to high pcib0: slot 10 INTB routed to irq 17 via \\_SB_.PCI0.LPMU found-> vendor=0x10de, dev=0x026d, revid=0xa3 domain=0, bus=0, slot=11, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xc0004000, size 12, enabled pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LUS0:0) pci_link10: Picked IRQ 20 with weight 0 ioapic0: Changing polarity for pin 20 to high pcib0: slot 11 INTA routed to irq 20 via \\_SB_.PCI0.LUS0 found-> vendor=0x10de, dev=0x026e, revid=0xa3 domain=0, bus=0, slot=11, func=1 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=7 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xc0005000, size 8, enabled pcib0: matched entry for 0.11.INTB (src \\_SB_.PCI0.LUS2:0) pci_link11: Picked IRQ 22 with weight 0 ioapic0: Changing polarity for pin 22 to high pcib0: slot 11 INTB routed to irq 22 via \\_SB_.PCI0.LUS2 found-> vendor=0x10de, dev=0x0265, revid=0xf1 domain=0, bus=0, slot=13, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[20]: type I/O Port, range 32, base 0x3080, size 4, enabled found-> vendor=0x10de, dev=0x0266, revid=0xf1 domain=0, bus=0, slot=14, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0x30b0, size 3, enabled map[14]: type I/O Port, range 32, base 0x30a4, size 2, enabled map[18]: type I/O Port, range 32, base 0x30a8, size 3, enabled map[1c]: type I/O Port, range 32, base 0x30a0, size 2, enabled map[20]: type I/O Port, range 32, base 0x3090, size 4, enabled map[24]: type Memory, range 32, base 0xc0006000, size 12, enabled pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.LTID:0) pci_link17: Picked IRQ 21 with weight 0 ioapic0: Changing polarity for pin 21 to high pcib0: slot 14 INTA routed to irq 21 via \\_SB_.PCI0.LTID found-> vendor=0x10de, dev=0x026f, revid=0xa2 domain=0, bus=0, slot=16, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns) found-> vendor=0x10de, dev=0x026c, revid=0xa2 domain=0, bus=0, slot=16, func=1 class=04-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks map[10]: type Memory, range 32, base 0, size 14, memory disabled pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LAZA:0) pci_link13: Picked IRQ 23 with weight 0 ioapic0: Changing polarity for pin 23 to high pcib0: slot 16 INTB routed to irq 23 via \\_SB_.PCI0.LAZA found-> vendor=0x10de, dev=0x0269, revid=0xa3 domain=0, bus=0, slot=20, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xc0007000, size 12, enabled map[14]: type I/O Port, range 32, base 0x30b8, size 3, enabled pcib0: matched entry for 0.20.INTA (src \\_SB_.PCI0.LMAC:0) pci_link12: Picked IRQ 16 with weight 1 pcib0: slot 20 INTA routed to irq 16 via \\_SB_.PCI0.LMAC found-> vendor=0x1022, dev=0x1100, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) pci0: at device 0.6 (no driver attached) pci0: at device 0.7 (no driver attached) pcib1: at device 2.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xc4000000-0xc7ffffff pcib1: prefetched decode 0xc9000000-0xc91fffff pci1: on pcib1 pci1: domain=0, physical bus=1 pcib2: at device 3.0 on pci0 pcib2: domain 0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xc8000000-0xc8ffffff pcib2: prefetched decode 0xc9200000-0xc93fffff pci3: on pcib2 pci3: domain=0, physical bus=3 found-> vendor=0x14e4, dev=0x4328, revid=0x03 domain=0, bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xc8000000, size 14, enabled pcib2: requested memory range 0xc8000000-0xc8003fff: good map[18]: type Prefetchable Memory, range 64, base 0xc9200000, size 20, enabled pcib2: requested memory range 0xc9200000-0xc92fffff: good pci3: at device 0.0 (no driver attached) vgapci0: mem 0xc2000000-0xc2ffffff,0xd0000000-0xdfffffff,0xc1000000-0xc1ffffff irq 18 at device 5.0 on pci0 pci0: at device 9.0 (no driver attached) isab0: at device 10.0 on pci0 isa0: on isab0 pci0: at device 10.1 (no driver attached) pci0: at device 10.3 (no driver attached) ohci0: mem 0xc0004000-0xc0004fff irq 20 at device 11.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0004000 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: on ohci0 ehci0: mem 0xc0005000-0xc00050ff irq 22 at device 11.1 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xc0005000 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: on ehci0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device 13.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3080 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=10 stat1=01 devices=0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 51 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 52 ata1: [MPSAFE] ata1: [ITHREAD] atapci1: port 0x30b0-0x30b7,0x30a4-0x30a7,0x30a8-0x30af,0x30a0-0x30a3,0x3090-0x309f mem 0xc0006000-0xc0006fff irq 21 at device 14.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3090 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 53 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xc0006000 ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30b0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30a4 ata2: SATA connect time=0ms status=00000113 ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30a8 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30a0 ata3: SATA connect timeout status=00000000 ata3: [MPSAFE] ata3: [ITHREAD] pcib3: at device 16.0 on pci0 pcib3: domain 0 pcib3: secondary bus 7 pcib3: subordinate bus 7 pcib3: I/O decode 0xf000-0xfff pcib3: no prefetched decode pcib3: Subtractively decoded bridge. pci7: on pcib3 pci7: domain=0, physical bus=7 hdac0: irq 23 at device 16.1 on pci0 hdac0: HDA Driver Revision: 20090624_0136 hdac0: Lazy allocation of 0x4000 bytes rid 0x10 type 3 at 0xb7f00000 hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xb7f00000 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54 hdac0: [MPSAFE] hdac0: [ITHREAD] hdac0: hdac_get_capabilities: Invalid corb size (0) device_attach: hdac0 attach returned 6 nfe0: port 0x30b8-0x30bf mem 0xc0007000-0xc0007fff irq 16 at device 20.0 on pci0 nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0007000 miibus0: on nfe0 rgephy0: PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: bpf attached nfe0: Ethernet address: 00:1e:68:11:8e:07 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54 nfe0: [MPSAFE] nfe0: [FILTER] acpi_tz0: on acpi0 atrtc0: port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 56 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 cpu0: on acpi0 cpu0: switching to generic Cx mode powernow0: on cpu0 cpu1: on acpi0 powernow1: on cpu1 ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xcf800-0xd0fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 uart0: failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 187938 -> 100000 procfs registered ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. ZFS filesystem version 13 ZFS storage pool version 13 lapic: Divisor 2, Frequency 99732466 hz Timecounter "TSC" frequency 2293846712 Hz quality -100 Timecounters tick every 1.000 msec vboxdrv: fAsync=0 offMin=0xa4 offMax=0x20c supdrvGipCreate: omni timer not supported, falling back to synchronous mode lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00010000 ata0: New devices: 00010000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 acpi_acad0: acline initialization start battery0: battery initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on nForce MCP51 chip acd0: DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 172KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: Identifying devices: 00000000 ata1: New devices: 00000000 ata2: Identifying devices: 00000001 ata2: New devices: 00000001 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad4: 238475MB at ata2-master SATA150 ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: nVidia check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00000000 ata3: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 50 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51 Root mount waiting for: usbus1 usbus0 uhub0: 8 ports with 8 removable, self powered battery0: battery initialization done, tried 1 times Root mount waiting for: usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 uhub1: 8 ports with 8 removable, self powered ugen1.2: at usbus1 uhub2: on usbus1 Root mount waiting for: usbus1 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.3: at usbus1 ugen1.4: at usbus1 Root mount waiting for: usbus1 ugen1.5: at usbus1 ums0: on usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 ums0: error reading report description device_attach: ums0 attach returned 12 ums0: on usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 Root mount waiting for: usbus1 ums0: error reading report description device_attach: ums0 attach returned 12 Trying to mount root from ufs:/dev/ad4s1a ct_to_ts([2009-12-20 21:15:55]) = 1261343755.000000000 start_init: trying /sbin/init ugen0.2: at usbus0 crypto: cryptosoft0: on motherboard crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 GEOM_ELI: Device ad4s1g.eli created. GEOM_ELI: Encryption: AES-CBC 128 GEOM_ELI: Crypto: software GEOM_ELI: Device ad4s1b.eli created. GEOM_ELI: Encryption: AES-CBC 256 GEOM_ELI: Crypto: software system power profile changed to 'economy' acpi_acad0: Off Line nfe0: link state changed to UP system power profile changed to 'performance' acpi_acad0: On Line