# This is a shell archive. Save it in a file, remove anything before # this line, and then unpack it by entering "sh file". Note, it may # create directories; files and directories will be owned by you and # have default permissions. # # This archive contains: # # /usr/ports/net/gpxe/ # /usr/ports/net/gpxe/files # /usr/ports/net/gpxe/files/patch-arch__i386__Makefile # /usr/ports/net/gpxe/pkg-descr # /usr/ports/net/gpxe/Makefile # /usr/ports/net/gpxe/distinfo # /usr/ports/net/gpxe/pkg-message # echo c - /usr/ports/net/gpxe/ mkdir -p /usr/ports/net/gpxe/ > /dev/null 2>&1 echo c - /usr/ports/net/gpxe/files mkdir -p /usr/ports/net/gpxe/files > /dev/null 2>&1 echo x - /usr/ports/net/gpxe/files/patch-arch__i386__Makefile sed 's/^X//' >/usr/ports/net/gpxe/files/patch-arch__i386__Makefile << 'd9e883753200f5a55384cbb6d1aff8f8' X--- ./arch/i386/Makefile.orig 2010-02-02 17:12:44.000000000 +0100 X+++ ./arch/i386/Makefile 2010-03-14 14:53:41.000000000 +0100 X@@ -69,7 +69,7 @@ X X # Locations of utilities X # X-ISOLINUX_BIN = /usr/lib/syslinux/isolinux.bin X+ISOLINUX_BIN = /usr/local/share/syslinux/isolinux.bin X X # i386-specific directories containing source files X # d9e883753200f5a55384cbb6d1aff8f8 echo x - /usr/ports/net/gpxe/pkg-descr sed 's/^X//' >/usr/ports/net/gpxe/pkg-descr << '8d71b9a807d3b6d06e571c6e43b7657e' XgPXE is an open-source PXE implementation and bootloader. X XCreate network booting code that allows computers to load Xtheir operating system from a network or to extend an Xexisting PXE implementation with support for additional Xprotocols, such iSCSI, HTTP, TFTP, NFS, FTP and ATA Xover Ethernet. X XWWW: http://etherboot.org 8d71b9a807d3b6d06e571c6e43b7657e echo x - /usr/ports/net/gpxe/Makefile sed 's/^X//' >/usr/ports/net/gpxe/Makefile << '1169493dff075546b13cbd60d8200dd9' X# New ports collection makefile for: gpxe X# Date created: 27-02-2010 X# Whom: Gürkan Karaman X# X# $FreeBSD$ X# X XPORTNAME= gpxe XPORTVERSION= 1.0.0 XCATEGORIES= net XMASTER_SITES= http://kernel.org/pub/software/utils/boot/gpxe/ XDISTNAME= ${PORTNAME}-${PORTVERSION} X XMAINTAINER= gk.freebsd@googlemail.com XCOMMENT= Create an open-source PXE implementation and bootloader X XBUILD_DEPENDS= syslinux:${PORTSDIR}/sysutils/syslinux X XUSE_BZIP2= 1 XUSE_GMAKE= 1 XUSE_CDRTOOLS= 1 XWRKSRC= ${WRKDIR}/${DISTNAME}/src XONLY_FOR_ARCHS= i386 X XPLIST_DIRS= %%DATADIR%% XPLIST_FILES= %%DATADIR%%/gpxe.dsk \ X %%DATADIR%%/gpxe.usb \ X %%DATADIR%%/gpxe.iso X Xdo-install: X @${MKDIR} ${DATADIR} X ${INSTALL_DATA} ${WRKDIR}/${DISTNAME}/src/bin/gpxe.dsk ${DATADIR} X ${INSTALL_DATA} ${WRKDIR}/${DISTNAME}/src/bin/gpxe.usb ${DATADIR} X ${INSTALL_DATA} ${WRKDIR}/${DISTNAME}/src/bin/gpxe.iso ${DATADIR} X Xpost-install: X @${CAT} ${PKGMESSAGE} X X.include 1169493dff075546b13cbd60d8200dd9 echo x - /usr/ports/net/gpxe/distinfo sed 's/^X//' >/usr/ports/net/gpxe/distinfo << 'f0de063f96cc2ae09943be6ca27b026f' XMD5 (gpxe-1.0.0.tar.bz2) = 15cb4bcc1c37dd96f47009da5e3f20b5 XSHA256 (gpxe-1.0.0.tar.bz2) = 7f5f1553626e1d4ba65f0e2efe6624e8fdf44b735aae71062b77252b08136708 XSIZE (gpxe-1.0.0.tar.bz2) = 1620040 f0de063f96cc2ae09943be6ca27b026f echo x - /usr/ports/net/gpxe/pkg-message sed 's/^X//' >/usr/ports/net/gpxe/pkg-message << '1472019fecf2a5f50f1c4f906f265fa6' X XThe following files have been installed in /usr/local/share/gpxe X X- gpxe.dsk X To create a bootable floppy, type X cat /usr/local/share/gpxe/gpxe.dsk > /dev/fd0 X where /dev/fd0 is your floppy drive. X This will erase any data already on the disk. X X- gpxe.usb X To create a bootable USB key, type X cat /usr/local/share/gpxe/gpxe.usb > /dev/sdX X where /dev/sdX is your USB key, and is *not* a real hard X disk on your system. X This will erase any data already on the USB key. X X- gpxe.iso X To create a bootable CD-ROM, burn the ISO image X /usr/local/share/gpxe/gpxe.iso to a blank CD-ROM. X 1472019fecf2a5f50f1c4f906f265fa6 exit