Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #12 r244877: Wed Jan  2 03:09:53 JST 2013
    root@rika.tokyo.tknetworks.org:/usr/obj/usr/src/sys/RIKA amd64
CPU: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz (3059.08-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x20652  Family = 6  Model = 25  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 12884901888 (12288 MB)
avail memory = 12174753792 (11610 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  DH55TC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  5
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCB61DF40/0x00000000CB61DE40, using 32 (20110527/tbfadt-517)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd0 at kbdmux0
acpi0: <INTEL DH55TC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20110527/tbutils-282)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf100-0xf107 mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel Ironlake (D) SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf irq 18 at device 22.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <Non-standard ns8250 class UART with FIFOs> port 0xf0a0-0xf0a7 mem 0xfe629000-0xfe629fff irq 17 at device 22.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xf040-0xf05f mem 0xfe600000-0xfe61ffff,0xfe628000-0xfe628fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: XX:XX:XX:XX:XX:XX
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfe627000-0xfe6273ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
siis0: <SiI3132 SATA controller> port 0xe000-0xe07f mem 0xfe584000-0xfe58407f,0xfe580000-0xfe583fff irq 16 at device 0.0 on pci1
siisch0: <SIIS channel> at channel 0 on siis0
siisch1: <SIIS channel> at channel 1 on siis0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
siis1: <SiI3132 SATA controller> port 0xd000-0xd07f mem 0xfe484000-0xfe48407f,0xfe480000-0xfe483fff irq 16 at device 0.0 on pci2
siisch2: <SIIS channel> at channel 0 on siis1
siisch3: <SIIS channel> at channel 1 on siis1
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfe626000-0xfe6263ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xfe625000-0xfe6257ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROMs> at iomem 0xce800-0xd2fff,0xd3000-0xd6fff,0xd7000-0xd7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
(noperiph:siisch2:0:-1:-1): rescan already queued
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
(noperiph:siisch0:0:-1:-1): rescan already queued
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
pmp0 at siisch0 bus 0 scbus2 target 15 lun 0
pmp0: <Port Multiplier 37261095 1706> ATA-0 device
pmp0: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
pmp0: 5 fan-out ports
pmp1 at siisch2 bus 0 scbus4 target 15 lun 0
pmp1: <Port Multiplier 37261095 1706> ATA-0 device
pmp1: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
pmp1: 5 fan-out ports
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ada0 at siisch0 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD30EZRX-00DC0B0 80.00A80> ATA-9 SATA 3.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
ada1 at siisch0 bus 0 scbus2 target 3 lun 0
ada1: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada2 at siisch0 bus 0 scbus2 target 4 lun 0
ada2: <WDC WD30EZRX-00MMMB0 80.00A80> ATA-8 SATA 3.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada3 at siisch2 bus 0 scbus4 target 0 lun 0
ada3: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad12
ada4 at siisch2 bus 0 scbus4 target 1 lun 0
ada4: <WDC WD20EARS-00S8B1 80.00A80> ATA-8 SATA 2.x device
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada4: Previously was known as ad13
ada5 at siisch2 bus 0 scbus4 target 2 lun 0
ada5: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device
ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada6 at siisch2 bus 0 scbus4 target 3 lun 0
ada6: <WDC WD30EZRX-00MMMB0 80.00A80> ATA-8 SATA 3.x device
ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada7 at siisch2 bus 0 scbus4 target 4 lun 0
ada7: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device
ada7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada7: Command Queueing enabled
ada7: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada8 at ahcich1 bus 0 scbus7 target 0 lun 0
ada8: <WDC WD10EADS-22M2B0 01.00A01> ATA-8 SATA 2.x device
ada8: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada8: Command Queueing enabled
ada8: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada8: Previously was known as ad18
ada9 at ahcich2 bus 0 scbus8 target 0 lun 0
ada9: <Hitachi HDT721010SLA360 ST6OA3AA> ATA-8 SATA 2.x device
ada9: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada9: Command Queueing enabled
ada9: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada9: Previously was known as ad20
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 11949515 Hz quality 1000
ugen1.3: <vendor 0x05e3> at usbus1
uhub4: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 3> on usbus1
uhub4: 4 ports with 4 removable, self powered
ugen1.4: <Generic> at usbus1
umass0: <Generic External, class 0/0, rev 2.00/2.02, addr 4> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:10:0:-1: Attached to scbus10
da0 at umass-sim0 bus 0 scbus10 target 0 lun 0
da0: <Generic External 2.02> Fixed Direct Access SCSI-4 device 
da0: 40.000MB/s transfers
da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
ugen1.5: <vendor 0x05e3> at usbus1
uhub5: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 5> on usbus1
uhub5: 4 ports with 4 removable, self powered
Root mount waiting for: usbus1
ugen1.6: <Chicony> at usbus1
uhub6: <Chicony Generic USB Hub, class 9/0, rev 1.10/1.00, addr 6> on usbus1
uhub6: 1 port with 0 removable, bus powered
Root mount waiting for: usbus1
ugen1.7: <Chicony> at usbus1
ukbd0: <Chicony PFU-65 USB Keyboard, class 0/0, rev 1.10/1.00, addr 7> on usbus1
kbd1 at ukbd0
Trying to mount root from zfs:tank []...
bridge0: Ethernet address: XX:XX:XX:XX:XX:XX