@@ -, +, @@ Add OpenRD support. --- /dev/null +++ b/sys/arm/conf/OPENRD-CL @@ -0,0 +1,101 @@ +# +# Custom kernel for OpenRD Client/Ultimate devices. +# +# $FreeBSD$ +# + +ident OPENRD-CL +include "../mv/kirkwood/std.sheevaplug" + +options SOC_MV_KIRKWOOD +makeoptions MODULES_OVERRIDE="" + +makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols +makeoptions WERROR="-Werror" + + +options SCHED_4BSD #4BSD scheduler +options INET #InterNETworking +options INET6 #IPv6 communications protocols +options FFS #Berkeley Fast Filesystem +options NANDFS #NAND Filesystem +options NFSCL #New Network Filesystem Client +options NFSLOCKD #Network Lock Manager +options NFS_ROOT #NFS usable as /, requires NFSCL +options BOOTP +options BOOTP_NFSROOT +options BOOTP_NFSV3 +options BOOTP_WIRED_TO=mge0 + +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework + +# Root fs on USB device +#options ROOTDEVNAME=\"ufs:/dev/da0a\" +# Root fs on NAND +#options ROOTDEVNAME=\"nandfd:/dev/gnand0s.rootfs\" + +options SYSVSHM #SYSV-style shared memory +options SYSVMSG #SYSV-style message queues +options SYSVSEM #SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions +options MUTEX_NOINLINE +options RWLOCK_NOINLINE +options NO_FFS_SNAPSHOT +options NO_SWAPPING + +# Debugging +options ALT_BREAK_TO_DEBUGGER +options DDB +options KDB +options DEADLKRES # Enable the deadlock resolver +makeoptions INVARIANTS +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options WITNESS # Enable checks to detect deadlocks and cycles +options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed + +# Pseudo devices +device random +device pty +device loop + +# Serial ports +device uart + +# Networking +device ether +device mge # Marvell Gigabit Ethernet controller +device mii +device e1000phy +device bpf +options HZ=1000 +options DEVICE_POLLING +device vlan + +device cesa # Marvell security engine +device crypto +device cryptodev + +# NAND +makeoptions WITH_NAND="yes" + +device nand +device nandsim +options ALQ +options KTR_ALQ + +# USB +options USB_DEBUG # enable debug msgs +device usb +device ehci +device umass +device scbus +device pass +device da + +# Flattened Device Tree +options FDT +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=openrd-cl.dts + --- /dev/null +++ b/sys/boot/fdt/dts/openrd-cl.dts @@ -0,0 +1,332 @@ +/* + * Copyright (c) 2009-2010 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Semihalf under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * OpenRD-Client/Ultimate Device Tree Source. + * + * $FreeBSD$ + */ + +/dts-v1/; + +/ { + model = "mrvl,OpenRD-CL"; + compatible = "OpenRD-CL"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + mpp = &MPP; + pci0 = &pci0; + serial0 = &serial0; + serial1 = &serial1; + soc = &SOC; + sram = &SRAM; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "ARM,88FR131"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x20000000>; // 512M at 0x0 + }; + + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "mrvl,lbc"; + bank-count = <3>; + + /* This reflects CPU decode windows setup. */ + ranges = <0x0 0x2f 0xf9300000 0x00100000>; + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mrvl,nfc"; + reg = <0x0 0x0 0x00100000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + + partition@500000 { + label = "rootfs"; + reg = <0x700000 0x1f000000>; + }; + }; + }; + + SOC: soc88f6281@f1000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0xf1000000 0x00100000>; + bus-frequency = <0>; + + PIC: pic@20200 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x20200 0x3c>; + compatible = "mrvl,pic"; + }; + + timer@20300 { + compatible = "mrvl,timer"; + reg = <0x20300 0x30>; + interrupts = <1>; + interrupt-parent = <&PIC>; + mrvl,has-wdt; + }; + + MPP: mpp@10000 { + #pin-cells = <2>; + compatible = "mrvl,mpp"; + reg = <0x10000 0x34>; + pin-count = <50>; + pin-map = < + 0 1 /* MPP[0]: NF_IO[2] */ + 1 1 /* MPP[1]: NF_IO[3] */ + 2 1 /* MPP[2]: NF_IO[4] */ + 3 1 /* MPP[3]: NF_IO[5] */ + 4 1 /* MPP[4]: NF_IO[6] */ + 5 1 /* MPP[5]: NF_IO[7] */ + 6 1 /* MPP[6]: SYSRST_OUTn */ + 8 2 /* MPP[8]: UA0_RTS */ + 9 2 /* MPP[9]: UA0_CTS */ + 10 3 /* MPP[10]: UA0_TXD */ + 11 3 /* MPP[11]: UA0_RXD */ + 12 1 /* MPP[12]: SD_CLK */ + 13 1 /* MPP[13]: SD_CMD */ + 14 1 /* MPP[14]: SD_D[0] */ + 15 1 /* MPP[15]: SD_D[1] */ + 16 1 /* MPP[16]: SD_D[2] */ + 17 1 /* MPP[17]: SD_D[3] */ + 18 1 /* MPP[18]: NF_IO[0] */ + 19 1 /* MPP[19]: NF_IO[1] */ + 20 3 /* MPP[20]: GE1_CPU_RX0 */ + 21 3 /* MPP[21]: GE1_CPU_RX1 */ + 22 3 /* MPP[22]: GE1_CPU_RX2 */ + 23 3 /* MPP[23]: GE1_CPU_RX3 */ + 24 3 /* MPP[24]: GE1_CPU_TX0 */ + 25 3 /* MPP[25]: GE1_CPU_TX1 */ + 26 3 /* MPP[26]: GE1_CPU_TX2 */ + 27 3 /* MPP[27]: GE1_CPU_RD3 */ + 28 0 /* MPP[28]: GPIO */ + 29 0 /* MPP[29]: GPIO */ + 30 3 /* GE1_RXCTL */ + 31 3 /* GE1_RXCLK */ + 32 3 /* GE1_TXCLK */ + 33 3 /* GE1_TXCTL */ + 34 0 >; /* MPP[34]: GPIO */ + }; + + GPIO: gpio@10100 { + #gpio-cells = <3>; + compatible = "mrvl,gpio"; + reg = <0x10100 0x20>; + gpio-controller; + interrupts = <35 36 37 38 39 40 41>; + interrupt-parent = <&PIC>; + }; + + rtc@10300 { + compatible = "mrvl,rtc"; + reg = <0x10300 0x08>; + }; + + twsi@11000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mrvl,twsi"; + reg = <0x11000 0x20>; + interrupts = <43>; + interrupt-parent = <&PIC>; + }; + + enet0: ethernet@72000 { + #address-cells = <1>; + #size-cells = <1>; + model = "V2"; + compatible = "mrvl,ge"; + reg = <0x72000 0x2000>; + ranges = <0x0 0x72000 0x2000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <12 13 14 11 46>; + interrupt-parent = <&PIC>; + phy-handle = <&phy0>; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mrvl,mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + }; + + enet1: ethernet@76000 { + #address-cells = <1>; + #size-cells = <1>; + model = "V2"; + compatible = "mrvl,ge"; + reg = <0x76000 0x2000>; + ranges = <0x0 0x76000 0x2000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <16 17 18 15 47>; + interrupt-parent = <&PIC>; + phy-handle = <&phy1>; + }; + + serial0: serial@12000 { + compatible = "ns16550"; + reg = <0x12000 0x20>; + reg-shift = <2>; + clock-frequency = <0>; + interrupts = <33>; + interrupt-parent = <&PIC>; + }; + + serial1: serial@12100 { + compatible = "ns16550"; + reg = <0x12100 0x20>; + reg-shift = <2>; + clock-frequency = <0>; + interrupts = <34>; + interrupt-parent = <&PIC>; + }; + + crypto@30000 { + compatible = "mrvl,cesa"; + reg = <0x30000 0x10000>; + interrupts = <22>; + interrupt-parent = <&PIC>; + sram-handle = <&SRAM>; + }; + + usb@50000 { + compatible = "mrvl,usb-ehci", "usb-ehci"; + reg = <0x50000 0x1000>; + interrupts = <48 19>; + interrupt-parent = <&PIC>; + }; + + xor@60000 { + compatible = "mrvl,xor"; + reg = <0x60000 0x1000>; + interrupts = <5 6 7 8>; + interrupt-parent = <&PIC>; + }; + + sata@80000 { + compatible = "mrvl,sata"; + reg = <0x80000 0x6000>; + interrupts = <21>; + interrupt-parent = <&PIC>; + }; + }; + + SRAM: sram@fd000000 { + compatible = "mrvl,cesa-sram"; + reg = <0xfd000000 0x00100000>; + }; + + chosen { + stdin = "serial0"; + stdout = "serial0"; + }; + + pci0: pcie@f1040000 { + compatible = "mrvl,pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf1040000 0x2000>; + bus-range = <0 255>; + ranges = <0x02000000 0x0 0xf4000000 0xf4000000 0x0 0x04000000 + 0x01000000 0x0 0x00000000 0xf1100000 0x0 0x00100000>; + clock-frequency = <33333333>; + interrupt-parent = <&PIC>; + interrupts = <44>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x1 */ + 0x0800 0x0 0x0 0x1 &PIC 0x9 + 0x0800 0x0 0x0 0x2 &PIC 0x9 + 0x0800 0x0 0x0 0x3 &PIC 0x9 + 0x0800 0x0 0x0 0x4 &PIC 0x9 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xf4000000 + 0x02000000 0x0 0xf4000000 + 0x0 0x04040000 + + 0x01000000 0x0 0x0 + 0x01000000 0x0 0x0 + 0x0 0x00100000>; + }; + }; +}; +