Attachment 115753 Details for Bug 157568 – dmesg.boot

dmesg.boot

dmesg.boot (text/plain; x-mac-type="0"; x-mac-creator="0"), 35.83 KB, created by Tino on 2011-06-04 09:18:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tino

Created: 2011-06-04 09:18:32 UTC

Size: 35.83 KB

patch

obsolete

>Table 'FACP' at 0xa7a694d0
>Table 'APIC' at 0xa7a695c8
>APIC: Found table at 0xa7a695c8
>APIC: Using the MADT enumerator.
>MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
>SMP: Added CPU 1 (AP)
>Copyright (c) 1992-2011 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 8.2-STABLE #9: Wed Jun  1 22:14:01 CEST 2011
>    tinotom@stone:/storage/systembuild/usr/src/sys/STONE amd64
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80c6a000.
>Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff80c6a320.
>Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff80c6a948.
>Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80c6aef8.
>Preloaded elf obj module "/boot/modules/cuse4bsd.ko" at 0xffffffff80c6af58.
>Preloaded elf obj module "/boot/kernel/ahci.ko" at 0xffffffff80c6b508.
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Calibrating TSC clock ... TSC clock: 1599971943 Hz
>CPU: AMD E-350 Processor (1599.97-MHz K8-class CPU)
>  Origin = "AuthenticAMD"  Id = 0x500f10  Family = 14  Model = 1  Stepping = 0
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
>  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
>  TSC: P-state invariant
>L1 2MB data TLB: 8 entries, fully associative
>L1 2MB instruction TLB: 8 entries, fully associative
>L1 4KB data TLB: 40 entries, fully associative
>L1 4KB instruction TLB: 0 entries, 0-way associative
>L1 data cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
>L1 instruction cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L2 2MB unified TLB: 0 entries, disabled/not present
>L2 4KB data TLB: 512 entries, 4-way associative
>L2 4KB instruction TLB: 512 entries, 4-way associative
>L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
>real memory  = 8589934592 (8192 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
>0x0000000000c9e000 - 0x00000000a7a19fff, 2799157248 bytes (683388 pages)
>0x00000000a7d8c000 - 0x00000000a7efffff, 1523712 bytes (372 pages)
>0x0000000100001000 - 0x000000022e1a7fff, 5068451840 bytes (1237415 pages)
>avail memory = 7821377536 (7459 MB)
>ACPI APIC Table: <ALASKA A M I>
>INTR: Adding local APIC 1 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 2 core(s)
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 2
>x86bios:   IVT 0x000000-0x0004ff at 0xffffff0000000000
>x86bios:  SSEG 0x010000-0x01ffff at 0xffffff8000022000
>x86bios:  EBDA 0x09d000-0x09ffff at 0xffffff000009d000
>x86bios:   ROM 0x0a0000-0x0effff at 0xffffff00000a0000
>ULE: setup cpu 0
>ULE: setup cpu 1
>ACPI: RSDP 0xf0430 00024 (v02 ALASKA)
>ACPI: XSDT 0xa7a63068 00054 (v01 ALASKA    A M I 01072009 AMI  00010013)
>ACPI: FACP 0xa7a694d0 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
>ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20101013/tbfadt-655)
>ACPI: DSDT 0xa7a63150 0637C (v02 ALASKA    A M I 00000000 INTL 20051117)
>ACPI: FACS 0xa7cdff80 00040
>ACPI: APIC 0xa7a695c8 00062 (v03 ALASKA    A M I 01072009 AMI  00010013)
>ACPI: MCFG 0xa7a69630 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
>ACPI: HPET 0xa7a69670 00038 (v01 ALASKA    A M I 01072009 AMI  00000004)
>ACPI: SSDT 0xa7a696a8 003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
>ACPI: SSDT 0xa7a69a88 012FA (v02    AMD     ALIB 00000001 MSFT 04000000)
>MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000
>ioapic0: Changing APIC ID to 0
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>ioapic0: intpin 9 polarity: low
>lapic: Routing NMI -> LINT1
>lapic: LINT1 trigger: edge
>lapic: LINT1 polarity: high
>ioapic0 <Version 2.1> irqs 0-23 on motherboard
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>Cuse4BSD v0.1.14 @ /dev/cuse
>wlan: <802.11 Link Layer>
>io: <I/O>
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>null: <null device, zero device>
>random: <entropy source, Software, Yarrow>
>acpi0: <ALASKA A M I> on motherboard
>PCIe: Memory Mapped configuration base @ 0xe0000000
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>acpi0: [MPSAFE]
>acpi0: [ITHREAD]
>ACPI: Executed 3 blocks of module-level executable AML code
>ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20101013/psargs-464)
>ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20101013/nsinit-452)
>acpi0: Power Button (fixed)
>ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/2 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  4 7 10 11 14 15
>  Validation          0  255   N     0  4 7 10 11 14 15
>  After Disable       0  255   N     0  4 7 10 11 14 15
>acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>acpi_hpet0: vend: 0x4353 rev: 0x10 num: 2 hz: 14318180 opts: legacy_route
>Timecounter "HPET" frequency 14318180 Hz quality 900
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found-> vendor=0x1022, dev=0x1510, revid=0x00
>        domain=0, bus=0, slot=0, func=0
>        class=06-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0006, statreg=0x0220, cachelnsz=0 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1002, dev=0x9802, revid=0x00
>        domain=0, bus=0, slot=1, func=0
>        class=03-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        powerspec 3  supports D0 D1 D2 D3  current D0
>        MSI supports 1 message, 64 bit
>        map[10]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled
>        map[14]: type I/O Port, range 32, base 0xf000, size  8, enabled
>        map[18]: type Memory, range 32, base 0xfeb00000, size 18, enabled
>        map[24]: type Memory, range 32, base 0xfe700000, size 20, enabled
>pcib0: matched entry for 0.1.INTA
>pcib0: slot 1 INTA hardwired to IRQ 18
>found-> vendor=0x1002, dev=0x1314, revid=0x00
>        domain=0, bus=0, slot=1, func=1
>        class=04-03-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=10
>        powerspec 3  supports D0 D1 D2 D3  current D0
>        MSI supports 1 message, 64 bit
>        map[10]: type Memory, range 32, base 0xfeb40000, size 14, enabled
>pcib0: matched entry for 0.1.INTB
>pcib0: slot 1 INTB hardwired to IRQ 19
>found-> vendor=0x1022, dev=0x1512, revid=0x00
>        domain=0, bus=0, slot=4, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=0
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=7
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 1 message, 64 bit
>pcib0: matched entry for 0.4.INTA
>pcib0: slot 4 INTA hardwired to IRQ 16
>found-> vendor=0x1002, dev=0x4391, revid=0x40
>        domain=0, bus=0, slot=17, func=0
>        class=01-06-01, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        map[10]: type I/O Port, range 32, base 0xf140, size  3, enabled
>        map[14]: type I/O Port, range 32, base 0xf130, size  2, enabled
>        map[18]: type I/O Port, range 32, base 0xf120, size  3, enabled
>        map[1c]: type I/O Port, range 32, base 0xf110, size  2, enabled
>        map[20]: type I/O Port, range 32, base 0xf100, size  4, enabled
>        map[24]: type Memory, range 32, base 0xfeb4b000, size 10, enabled
>pcib0: matched entry for 0.17.INTA
>pcib0: slot 17 INTA hardwired to IRQ 19
>found-> vendor=0x1002, dev=0x4397, revid=0x00
>        domain=0, bus=0, slot=18, func=0
>        class=0c-03-10, hdrtype=0x00, mfdev=1
>        cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        map[10]: type Memory, range 32, base 0xfeb4a000, size 12, enabled
>pcib0: matched entry for 0.18.INTA
>pcib0: slot 18 INTA hardwired to IRQ 18
>unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeb4a000
>ohci early: SMM active, request owner change
>found-> vendor=0x1002, dev=0x4396, revid=0x00
>        domain=0, bus=0, slot=18, func=2
>        class=0c-03-20, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=7
>        powerspec 2  supports D0 D1 D2 D3  current D0
>        map[10]: type Memory, range 32, base 0xfeb49000, size  8, enabled
>pcib0: matched entry for 0.18.INTB
>pcib0: slot 18 INTB hardwired to IRQ 17
>unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeb49000
>found-> vendor=0x1002, dev=0x4397, revid=0x00
>        domain=0, bus=0, slot=19, func=0
>        class=0c-03-10, hdrtype=0x00, mfdev=1
>        cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        map[10]: type Memory, range 32, base 0xfeb48000, size 12, enabled
>pcib0: matched entry for 0.19.INTA
>pcib0: slot 19 INTA hardwired to IRQ 18
>unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeb48000
>ohci early: SMM active, request owner change
>found-> vendor=0x1002, dev=0x4396, revid=0x00
>        domain=0, bus=0, slot=19, func=2
>        class=0c-03-20, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=7
>        powerspec 2  supports D0 D1 D2 D3  current D0
>        map[10]: type Memory, range 32, base 0xfeb47000, size  8, enabled
>pcib0: matched entry for 0.19.INTB
>pcib0: slot 19 INTB hardwired to IRQ 17
>unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeb47000
>found-> vendor=0x1002, dev=0x4385, revid=0x42
>        domain=0, bus=0, slot=20, func=0
>        class=0c-05-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1002, dev=0x439d, revid=0x40
>        domain=0, bus=0, slot=20, func=3
>        class=06-01-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1002, dev=0x4384, revid=0x40
>        domain=0, bus=0, slot=20, func=4
>        class=06-04-01, hdrtype=0x01, mfdev=1
>        cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords)
>        lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1002, dev=0x4399, revid=0x00
>        domain=0, bus=0, slot=20, func=5
>        class=0c-03-10, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=c, irq=11
>        map[10]: type Memory, range 32, base 0xfeb46000, size 12, enabled
>pcib0: matched entry for 0.20.INTC
>pcib0: slot 20 INTC hardwired to IRQ 18
>unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeb46000
>ohci early: SMM active, request owner change
>found-> vendor=0x1002, dev=0x43a0, revid=0x00
>        domain=0, bus=0, slot=21, func=0
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=255
>        powerspec 3  supports D0 D1 D2 D3  current D0
>        MSI supports 1 message, 64 bit
>found-> vendor=0x1002, dev=0x43a1, revid=0x00
>        domain=0, bus=0, slot=21, func=1
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=255
>        powerspec 3  supports D0 D1 D2 D3  current D0
>        MSI supports 1 message, 64 bit
>found-> vendor=0x1002, dev=0x43a2, revid=0x00
>        domain=0, bus=0, slot=21, func=2
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=255
>        powerspec 3  supports D0 D1 D2 D3  current D0
>        MSI supports 1 message, 64 bit
>found-> vendor=0x1002, dev=0x43a3, revid=0x00
>        domain=0, bus=0, slot=21, func=3
>        class=06-04-00, hdrtype=0x01, mfdev=1
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=255
>        powerspec 3  supports D0 D1 D2 D3  current D0
>        MSI supports 1 message, 64 bit
>found-> vendor=0x1002, dev=0x4397, revid=0x00
>        domain=0, bus=0, slot=22, func=0
>        class=0c-03-10, hdrtype=0x00, mfdev=1
>        cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        map[10]: type Memory, range 32, base 0xfeb45000, size 12, enabled
>pcib0: matched entry for 0.22.INTA
>pcib0: slot 22 INTA hardwired to IRQ 18
>unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeb45000
>ohci early: SMM active, request owner change
>found-> vendor=0x1002, dev=0x4396, revid=0x00
>        domain=0, bus=0, slot=22, func=2
>        class=0c-03-20, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
>        lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=b, irq=7
>        powerspec 2  supports D0 D1 D2 D3  current D0
>        map[10]: type Memory, range 32, base 0xfeb44000, size  8, enabled
>pcib0: matched entry for 0.22.INTB
>pcib0: slot 22 INTB hardwired to IRQ 17
>unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeb44000
>found-> vendor=0x1022, dev=0x1700, revid=0x43
>        domain=0, bus=0, slot=24, func=0
>        class=06-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1022, dev=0x1701, revid=0x00
>        domain=0, bus=0, slot=24, func=1
>        class=06-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1022, dev=0x1702, revid=0x00
>        domain=0, bus=0, slot=24, func=2
>        class=06-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1022, dev=0x1703, revid=0x00
>        domain=0, bus=0, slot=24, func=3
>        class=06-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1022, dev=0x1704, revid=0x00
>        domain=0, bus=0, slot=24, func=4
>        class=06-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1022, dev=0x1718, revid=0x00
>        domain=0, bus=0, slot=24, func=5
>        class=06-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1022, dev=0x1716, revid=0x00
>        domain=0, bus=0, slot=24, func=6
>        class=06-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x1022, dev=0x1719, revid=0x00
>        domain=0, bus=0, slot=24, func=7
>        class=06-00-00, hdrtype=0x00, mfdev=1
>        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff,0xfe700000-0xfe7fffff irq 18 at device 1.0 on pci0
>pci0: <multimedia, HDA> at device 1.1 (no driver attached)
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0xfff000-0xfff
>pcib1:   no prefetched decode
>pci1: <ACPI PCI bus> on pcib1
>pci1: domain=0, physical bus=1
>ahci0: <ATI IXP700 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb4b000-0xfeb4b3ff irq 19 at device 17.0 on pci0
>ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfeb4b000
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 49
>ahci0: [MPSAFE]
>ahci0: [ITHREAD]
>ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
>ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 6Gbps PM PMD SSC PSC 32cmd 6ports
>ahci0: Caps2:
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich0: [MPSAFE]
>ahcich0: [ITHREAD]
>ahcich0: Caps:
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich1: [MPSAFE]
>ahcich1: [ITHREAD]
>ahcich1: Caps:
>ahcich2: <AHCI channel> at channel 2 on ahci0
>ahcich2: [MPSAFE]
>ahcich2: [ITHREAD]
>ahcich2: Caps:
>ahcich3: <AHCI channel> at channel 3 on ahci0
>ahcich3: [MPSAFE]
>ahcich3: [ITHREAD]
>ahcich3: Caps:
>ahcich4: <AHCI channel> at channel 4 on ahci0
>ahcich4: [MPSAFE]
>ahcich4: [ITHREAD]
>ahcich4: Caps:
>ahcich5: <AHCI channel> at channel 5 on ahci0
>ahcich5: [MPSAFE]
>ahcich5: [ITHREAD]
>ahcich5: Caps:
>ohci0: <OHCI (generic) USB controller> mem 0xfeb4a000-0xfeb4afff irq 18 at device 18.0 on pci0
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 50
>ohci0: [MPSAFE]
>ohci0: [ITHREAD]
>usbus0: <OHCI (generic) USB controller> on ohci0
>usbus0: bpf attached
>ohci0: usbpf: Attached
>ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb49000-0xfeb490ff irq 17 at device 18.2 on pci0
>ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51
>ehci0: [MPSAFE]
>ehci0: [ITHREAD]
>ehci0: Dropped interrupts workaround enabled
>usbus1: EHCI version 1.0
>usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
>usbus1: bpf attached
>ehci0: usbpf: Attached
>ohci1: <OHCI (generic) USB controller> mem 0xfeb48000-0xfeb48fff irq 18 at device 19.0 on pci0
>ohci1: [MPSAFE]
>ohci1: [ITHREAD]
>usbus2: <OHCI (generic) USB controller> on ohci1
>usbus2: bpf attached
>ohci1: usbpf: Attached
>ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfeb47000-0xfeb470ff irq 17 at device 19.2 on pci0
>ehci1: [MPSAFE]
>ehci1: [ITHREAD]
>ehci1: Dropped interrupts workaround enabled
>usbus3: EHCI version 1.0
>usbus3: <EHCI (generic) USB 2.0 controller> on ehci1
>usbus3: bpf attached
>ehci1: usbpf: Attached
>pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 20.3 on pci0
>isa0: <ISA bus> on isab0
>pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   I/O decode        0xf000-0xfff
>pcib2:   no prefetched decode
>pcib2:   Subtractively decoded bridge.
>pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.P0PC - AE_NOT_FOUND
>pci2: <ACPI PCI bus> on pcib2
>pci2: domain=0, physical bus=2
>ohci2: <OHCI (generic) USB controller> mem 0xfeb46000-0xfeb46fff irq 18 at device 20.5 on pci0
>ohci2: [MPSAFE]
>ohci2: [ITHREAD]
>usbus4: <OHCI (generic) USB controller> on ohci2
>usbus4: bpf attached
>ohci2: usbpf: Attached
>pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   I/O decode        0xfff000-0xfff
>pcib3:   memory decode     0xfea00000-0xfeafffff
>pcib3:   no prefetched decode
>pci3: <ACPI PCI bus> on pcib3
>pci3: domain=0, physical bus=3
>found-> vendor=0x168c, dev=0x002b, revid=0x01
>        domain=0, bus=3, slot=0, func=0
>        class=02-80-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=7
>        powerspec 3  supports D0 D1 D3  current D0
>        MSI supports 1 message
>        map[10]: type Memory, range 64, base 0xfea00000, size 16, enabled
>pcib3: requested memory range 0xfea00000-0xfea0ffff: good
>pcib3: matched entry for 3.0.INTA
>pcib3: slot 0 INTA hardwired to IRQ 16
>ath0: <Atheros 9285> mem 0xfea00000-0xfea0ffff irq 16 at device 0.0 on pci3
>ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfea00000
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52
>ath0: [MPSAFE]
>ath0: [ITHREAD]
>ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps
>ath0: AR9285 mac 192.2 RF5133 phy 14.0
>ath0: Use hw queue 1 for WME_AC_BE traffic
>ath0: Use hw queue 0 for WME_AC_BK traffic
>ath0: Use hw queue 2 for WME_AC_VI traffic
>ath0: Use hw queue 3 for WME_AC_VO traffic
>ath0: Use hw queue 8 for CAB traffic
>ath0: Use hw queue 9 for beacons
>ath0: using multicast key search
>pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
>pcib4:   domain            0
>pcib4:   secondary bus     4
>pcib4:   subordinate bus   4
>pcib4:   I/O decode        0xe000-0xefff
>pcib4:   prefetched decode 0xd0000000-0xd00fffff
>pci4: <ACPI PCI bus> on pcib4
>pci4: domain=0, physical bus=4
>found-> vendor=0x10ec, dev=0x8168, revid=0x06
>        domain=0, bus=4, slot=0, func=0
>        class=02-00-00, hdrtype=0x00, mfdev=0
>        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=7
>        powerspec 3  supports D0 D1 D2 D3  current D0
>        MSI supports 1 message, 64 bit
>        MSI-X supports 4 messages in map 0x20
>        map[10]: type I/O Port, range 32, base 0xe000, size  8, enabled
>pcib4: requested I/O range 0xe000-0xe0ff: in range
>        map[18]: type Prefetchable Memory, range 64, base 0xd0004000, size 12, enabled
>pcib4: requested memory range 0xd0004000-0xd0004fff: good
>        map[20]: type Prefetchable Memory, range 64, base 0xd0000000, size 14, enabled
>pcib4: requested memory range 0xd0000000-0xd0003fff: good
>pcib4: matched entry for 4.0.INTA
>pcib4: slot 0 INTA hardwired to IRQ 17
>re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci4
>re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd0004000
>re0: MSI count : 1
>re0: MSI-X count : 4
>re0: Reserved 0x4000 bytes for rid 0x20 type 3 at 0xd0000000
>re0: attempting to allocate 1 MSI-X vectors (4 supported)
>msi: routing MSI-X IRQ 256 to local APIC 0 vector 53
>re0: using IRQ 256 for MSI-X
>re0: Using 1 MSI-X message
>re0: Chip rev. 0x2c000000
>re0: MAC rev. 0x00000000
>miibus0: <MII bus> on re0
>rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
>rgephy0:  10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
>re0: bpf attached
>re0: Ethernet address: f4:6d:04:d9:94:74
>re0: [MPSAFE]
>re0: [ITHREAD]
>pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
>pcib5:   domain            0
>pcib5:   secondary bus     5
>pcib5:   subordinate bus   5
>pcib5:   I/O decode        0xfff000-0xfff
>pcib5:   memory decode     0xfe900000-0xfe9fffff
>pcib5:   no prefetched decode
>pci5: <ACPI PCI bus> on pcib5
>pci5: domain=0, physical bus=5
>found-> vendor=0x1033, dev=0x0194, revid=0x03
>        domain=0, bus=5, slot=0, func=0
>        class=0c-03-30, hdrtype=0x00, mfdev=0
>        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=11
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 8 messages, 64 bit
>        MSI-X supports 8 messages in map 0x10
>        map[10]: type Memory, range 64, base 0xfe900000, size 13, enabled
>pcib5: requested memory range 0xfe900000-0xfe901fff: good
>pcib5: matched entry for 5.0.INTA
>pcib5: slot 0 INTA hardwired to IRQ 18
>xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe900000-0xfe901fff irq 18 at device 0.0 on pci5
>xhci0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfe900000
>xhci0: [MPSAFE]
>xhci0: [ITHREAD]
>xhci0: 32 byte context size.
>usbus5 on xhci0
>usbus5: bpf attached
>xhci0: usbpf: Attached
>pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0
>pcib6:   domain            0
>pcib6:   secondary bus     6
>pcib6:   subordinate bus   6
>pcib6:   I/O decode        0xfff000-0xfff
>pcib6:   memory decode     0xfe800000-0xfe8fffff
>pcib6:   no prefetched decode
>pci6: <ACPI PCI bus> on pcib6
>pci6: domain=0, physical bus=6
>found-> vendor=0x1033, dev=0x0194, revid=0x03
>        domain=0, bus=6, slot=0, func=0
>        class=0c-03-30, hdrtype=0x00, mfdev=0
>        cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
>        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>        intpin=a, irq=10
>        powerspec 3  supports D0 D3  current D0
>        MSI supports 8 messages, 64 bit
>        MSI-X supports 8 messages in map 0x10
>        map[10]: type Memory, range 64, base 0xfe800000, size 13, enabled
>pcib6: requested memory range 0xfe800000-0xfe801fff: good
>pcib6: matched entry for 6.0.INTA
>pcib6: slot 0 INTA hardwired to IRQ 19
>xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfe800000-0xfe801fff irq 19 at device 0.0 on pci6
>xhci1: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfe800000
>xhci1: [MPSAFE]
>xhci1: [ITHREAD]
>xhci1: 32 byte context size.
>usbus6 on xhci1
>usbus6: bpf attached
>xhci1: usbpf: Attached
>ohci3: <OHCI (generic) USB controller> mem 0xfeb45000-0xfeb45fff irq 18 at device 22.0 on pci0
>ohci3: [MPSAFE]
>ohci3: [ITHREAD]
>usbus7: <OHCI (generic) USB controller> on ohci3
>usbus7: bpf attached
>ohci3: usbpf: Attached
>ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfeb44000-0xfeb440ff irq 17 at device 22.2 on pci0
>ehci2: [MPSAFE]
>ehci2: [ITHREAD]
>ehci2: Dropped interrupts workaround enabled
>usbus8: EHCI version 1.0
>usbus8: <EHCI (generic) USB 2.0 controller> on ehci2
>usbus8: bpf attached
>ehci2: usbpf: Attached
>amdtemp0: <AMD K8 Thermal Sensors> on hostb4
>acpi_button0: <Power Button> on acpi0
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock (resolution 1000000us)
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 54
>uart0: [FILTER]
>uart0: fast interrupt
>acpi0: wakeup code va 0xffffff81cf351000 pa 0x4000
>isa_probe_children: disabling PnP devices
>atrtc: atrtc0 already exists; skipping it
>sc: sc0 already exists; skipping it
>uart: uart0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>amdsbwd0: memory base address = 0x00bafe00
>amdsbwd0: <AMD SB600/SB7xx Watchdog Timer> at iomem 0xbafe00-0xbafe03,0xbafe04-0xbafe07 on isa0
>amdsbwd0: bus_alloc_resource for ctrl failed
>device_attach: amdsbwd0 attach returned 6
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55
>atkbd0: [GIANT-LOCKED]
>atkbd0: [ITHREAD]
>psm0: current command byte:0065
>psm0: failed to reset the aux device.
>fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
>ppc0 failed to probe at irq 7 on isa0
>uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>isa_probe_children: probing PnP devices
>hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>Device configuration finished.
>procfs registered
>ZFS filesystem version 4
>ZFS storage pool version 15
>lapic: Divisor 2, Frequency 99998268 Hz
>Timecounter "TSC" frequency 1599971943 Hz quality -100
>Timecounters tick every 1.000 msec
>vlan: initialized, using hash tables with chaining
>ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
>ipfw0: bpf attached
>lo0: bpf attached
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 480Mbps High Speed USB v2.0
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>usbus4: 12Mbps Full Speed USB v1.0
>usbus5: 5.0Gbps Super Speed USB v3.0
>usbus6: 5.0Gbps Super Speed USB v3.0
>usbus7: 12Mbps Full Speed USB v1.0
>usbus8: 480Mbps High Speed USB v2.0
>ahcich0: AHCI reset...
>ahcich0: SATA connect timeout time=10000us status=00000000
>ahcich0: AHCI reset: device not found
>ahcich1: AHCI reset...
>ahcich1: SATA connect time=900us status=00000123
>ahcich1: AHCI reset: device found
>ahcich2: AHCI reset...
>ahcich2: SATA connect time=900us status=00000123
>ahcich2: AHCI reset: device found
>ahcich3: AHCI reset...
>ahcich3: SATA connect timeout time=10000us status=00000000
>ahcich3: AHCI reset: device not found
>ahcich4: AHCI reset...
>ahcich4: SATA connect time=1000us status=00000123
>ahcich4: AHCI reset: device found
>ahcich5: AHCI reset...
>ahcich5: SATA connect timeout time=10000us status=00000000
>ahcich5: AHCI reset: device not found
>ugen0.1: <ATI> at usbus0
>uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <ATI> at usbus1
>uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>ugen2.1: <ATI> at usbus2
>uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen3.1: <ATI> at usbus3
>uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>ugen4.1: <ATI> at usbus4
>uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>ugen5.1: <0x1033> at usbus5
>uhub5: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5
>ugen6.1: <0x1033> at usbus6
>uhub6: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6
>ugen7.1: <ATI> at usbus7
>uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
>ugen8.1: <ATI> at usbus8
>uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
>ahcich1: AHCI reset: device ready after 100ms
>ahcich2: AHCI reset: device ready after 100ms
>ahcich4: AHCI reset: device ready after 100ms
>(aprobe1:ahcich1:0:15:0): SIGNATURE: 0000
>(aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
>(aprobe2:ahcich2:0:15:0): SIGNATURE: 0000
>(aprobe1:ahcich2:0:0:0): SIGNATURE: 0000
>(aprobe4:ahcich4:0:15:0): SIGNATURE: 0000
>(aprobe2:ahcich4:0:0:0): SIGNATURE: 0000
>pass0 at ahcich1 bus 0 scbus1 target 0 lun 0
>pass0: <ST32000542AS CC34> ATA-8 SATA 2.x device
>pass0: Serial Number 5XW1HR1B
>pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass0: Command Queueing enabled
>pass1 at ahcich2 bus 0 scbus2 target 0 lun 0
>pass1: <ST31500541AS CC34> ATA-8 SATA 2.x device
>pass1: Serial Number 9XW03Y0L
>pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass1: Command Queueing enabled
>pass2 at ahcich4 bus 0 scbus4 target 0 lun 0
>pass2: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device
>pass2: Serial Number WD-WMAZA0801237
>pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>pass2: Command Queueing enabled
>ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
>ada0: <ST32000542AS CC34> ATA-8 SATA 2.x device
>ada0: Serial Number 5XW1HR1B
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada0: Command Queueing enabled
>ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
>ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
>ada1: <ST31500541AS CC34> ATA-8 SATA 2.x device
>ada1: Serial Number 9XW03Y0L
>ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada1: Command Queueing enabled
>ada1: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
>ada2 at ahcich4 bus 0 scbus4 target 0 lun 0
>ada2: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device
>ada2: Serial Number WD-WMAZA0801237
>ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada2: Command Queueing enabled
>ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50
>msi: Assigning MSI-X IRQ 256 to local APIC 1 vector 51
>GEOM: new disk ada0
>GEOM: new disk ada1
>GEOM: new disk ada2
>uhub4: 2 ports with 2 removable, self powered
>uhub7: 4 ports with 4 removable, self powered
>uhub0: 5 ports with 5 removable, self powered
>uhub2: 5 ports with 5 removable, self powered
>uhub5: 4 ports with 4 removable, self powered
>uhub6: 4 ports with 4 removable, self powered
>Root mount waiting for: usbus8 usbus5 usbus3 usbus1
>ugen5.2: <American Power Conversion> at usbus5
>uhub8: 4 ports with 4 removable, self powered
>uhub1: 5 ports with 5 removable, self powered
>uhub3: 5 ports with 5 removable, self powered
>Root mount waiting for: usbus3 usbus1
>Trying to mount root from zfs:zfs/root
>ugen7.2: <vendor 0x0cf3> at usbus7
>ugen2.2: <vendor 0x04d9> at usbus2
>ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.70, addr 2> on usbus2
>kbd2 at ukbd0
>kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
>uhid0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.70, addr 2> on usbus2
>ugen0.2: <ADMtek> at usbus0
>aue0: <ADMtek USB To LAN Converter, rev 1.10/2.01, addr 2> on usbus0
>miibus1: <MII bus> on aue0
>ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
>ukphy0: OUI 0x000749, model 0x0001, rev. 1
>ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>ue0: <USB Ethernet> on aue0
>ue0: bpf attached
>ue0: Ethernet address: 00:60:6e:00:05:dc
>start_init: trying /sbin/init
>wlan0: bpf attached
>wlan0: bpf attached
>wlan0: Ethernet address: e0:b9:a2:7f:dc:1e
>tun0: bpf attached

Actions: View

Attachments on bug 157568: 115753