Attachment 12058 Details for Bug 23499 – file.shar

file.shar

file.shar (text/plain), 16.75 KB, created by bsdport on 2000-12-12 11:40:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: bsdport

Created: 2000-12-12 11:40:02 UTC

Size: 16.75 KB

patch

obsolete

># This is a shell archive.  Save it in a file, remove anything before
># this line, and then unpack it by entering "sh file".  Note, it may
># create directories; files and directories will be owned by you and
># have default permissions.
>#
># This archive contains:
>#
>#	Mk/bsd.latex.mk
>#	Mk/bsd.port.mk.patch
>#	print/latex-foiltex
>#	print/latex-foiltex/pkg-comment
>#	print/latex-foiltex/Makefile
>#	print/latex-foiltex/distinfo
>#	print/latex-foiltex/pkg-descr
>#	print/latex-foiltex/pkg-plist
>#	print/latex-foiltex/Makefile.standalone
>#	print/latex-dropping
>#	print/latex-dropping/pkg-plist
>#	print/latex-dropping/pkg-descr
>#	print/latex-dropping/pkg-comment
>#	print/latex-dropping/distinfo
>#	print/latex-dropping/Makefile
>#	print/latex-dropping/files
>#	print/latex-dropping/files/patch-aa
>#	print/latex-dropping/Makefile.standalone
>#
>echo x - Mk/bsd.latex.mk
>sed 's/^X//' >Mk/bsd.latex.mk << 'END-of-Mk/bsd.latex.mk'
>X#
>X# bsd.latex.mk - Utility definitions for LaTeX macro package related ports
>X#
>X# Created by:		Dave Chapeskie <bsdport@ddm.crosswinds.net>
>X#
>X# $FreeBSD$
>X#
>X
>X.if !defined(Latex_Include)
>X
>XLatex_Include=			bsd.latex.mk
>XLatex_Include_MAINTAINER=	bsdport@ddm.crosswinds.net
>X
>X#
>X# This file for ports of LaTeX macro packages.
>X# Define LATEX_PORTNAME variable before bsd.port.[pre.]mk
>X# and it will automatically include this file.
>X#
>X# This file uses the following variables:
>X#
>X# LATEX_PORTNAME:
>X#	Must be set by port.
>X#
>X# LATEX_NO_EXTRACT:
>X#	If set to anything other than NO then the ${LATEX_INS_FILES} will
>X#	NOT be run during the extract target.
>X#
>X# LATEX_NO_WRKSUBDIR:
>X#	Unless this is set to something other than NO, ${NO_WRKSUBDIR} will
>X#	be set.
>X#
>X# LATEX_NO_DEPENDS:
>X#	If set to anything other than NO then BUILD_DEPENDS and RUN_DEPENDS
>X#	are left alone (normally latex:${PORTSDIR}/print/teTeX is added).
>X#
>X# LATEX_NO_DOC_BUILD:
>X#	If set to anything other than NO then the ${LATEX_DTX_FILES} will
>X#	NOT be run through LaTeX during the build target.
>X#
>X# LATEX_NO_INSTALL:
>X#	If set to anything other than NO then ${LATEX_INSTALL_FILES} will
>X#	NOT be installed during the install target.
>X#
>X# LATEX_NO_DOC_INSTALL:
>X#	If set to anything other than NO then ${LATEX_INSTALL_DOC_FILES}
>X#	will NOT be installed during the install target.
>X#	Default: ${LATEX_NO_DOC_BUILD}
>X#
>X# LATEX_REHASH:
>X#	If set to YES then the install target will run "texconfig rehash".
>X#	Default: YES
>X#
>X# LATEX_LYX_RECONFIG:
>X#	If set to YES then the install target will run "./configure" from
>X#	${PREFIX}/share/lyx.  This should be set as ?=YES in ports for
>X#	macro packages that LyX auto-detects.  The port user can then override
>X#	it if they wish.
>X#	Default: NO
>X#
>X#
>X# LATEX_MASTER_SITES:
>X#	Master sites for the LaTeX macro source.
>X#	Default: ${MASTER_SITE_TEX_CTAN}
>X#
>X# LATEX_DISTFILES:
>X#	Typical distfiles for a LaTeX macro package on CTAN.
>X#	Default: ${LATEX_INS_FILES} ${LATEX_DTX_FILES}
>X#
>X# LATEX_INS_FILES:
>X#	Files that are run through latex during the extract target unless
>X#	${LATEX_NO_EXTRACT} is set.
>X#	Default: ${LATEX_PORTNAME}.ins
>X#
>X# LATEX_DTX_FILES:
>X#	Documentaion files, run through latex to format.
>X#	Default: ${LATEX_PORTNAME}.dtx
>X#
>X# LATEX_LINK_DISTFILES:
>X#	${DISTFILES} that need to be symlinked into ${WRKSRC} during
>X#	extract target for later latex runs.
>X#	Default: all *.ins and *.dtx files in ${LATEX_DISTFILES} unless
>X#		${LATEX_NO_EXTRACT} != NO.
>X#
>X# LATEX_INSTALL_DIR:
>X#	Location to install LaTeX macro packages.
>X#	Default: ${PREFIX}/share/texmf/tex/latex/${LATEX_PORTNAME}
>X#
>X# LATEX_INSTALL_DOC_DIR:
>X#	Location to install LaTeX macro package documentation.
>X#	Default: ${PREFIX}/share/texmf/doc/latex/${LATEX_PORTNAME}
>X#
>X# LATEX_INSTALL_FILES:
>X#	Files to install into ${LATEX_INSTALL_DIR} unless ${LATEX_NO_INSTALL}
>X#	is set to something other than NO.
>X#	Default: ${LATEX_PORTNAME}.sty
>X#
>X# LATEX_INSTALL_DOC_FILES:
>X#	Files to install into ${LATEX_INSTALL_DOC_DIR} unless
>X#	${LATEX_NO_DOC_INSTALL} is set to something other than NO.
>X#	Default: ${LATEX_DTX_FILES} and coresponding *.dvi files.
>X
>XPKGNAMEPREFIX?=		latex-
>X
>XLATEX_CMD?=		latex
>XLATEX_ARGS?=
>X
>XLATEX_NO_EXTRACT?=	NO
>XLATEX_NO_WRKSUBDIR?=	NO
>XLATEX_NO_DEPENDS?=	NO
>XLATEX_NO_DOC_BUILD?=	NO
>XLATEX_NO_INSTALL?=	NO
>XLATEX_NO_DOC_INSTALL?=	${LATEX_NO_DOC_BUILD}
>XLATEX_REHASH?=		YES
>XLATEX_LYX_RECONFIG?=	NO
>X
>XLATEX_DISTFILES?=	${LATEX_INS_FILES} ${LATEX_DTX_FILES}
>XLATEX_INS_FILES?=	${LATEX_PORTNAME}.ins
>XLATEX_DTX_FILES?=	${LATEX_PORTNAME}.dtx
>XLATEX_INSTALL_DIR?=	${PREFIX}/share/texmf/tex/latex/${LATEX_PORTNAME}
>XLATEX_INSTALL_DOC_DIR?=	${PREFIX}/share/texmf/doc/latex/${LATEX_PORTNAME}
>XLATEX_INSTALL_FILES?=	${LATEX_PORTNAME}.sty
>XLATEX_INSTALL_DOC_FILES?=${LATEX_DTX_FILES} ${LATEX_DTX_FILES:R:S/$/.dvi/}
>X
>X.if ${LATEX_NO_EXTRACT} == "NO"
>XLATEX_LINK_DISTFILES?=	${LATEX_DISTFILES:M*.ins} ${LATEX_DISTFILES:M*.dtx}
>X.else
>XLATEX_LINK_DISTFILES?=
>X.endif
>X
>X.if ( ${LATEX_LINK_DISTFILES} != "" )
>X# LaTeX needs the files in the same directory.
>Xpost-extract: latex-link-distfiles
>Xlatex-link-distfiles:
>X	${LN} -s ${LATEX_LINK_DISTFILES:S?^?${DISTDIR}/?} ${WRKSRC}
>X.endif
>X
>X.if ${LATEX_NO_EXTRACT} == "NO"
>XEXTRACT_ONLY?=
>Xpost-extract:	latex-extract
>X.endif
>Xlatex-extract:
>X	@cd ${WRKSRC} && for file in ${LATEX_INS_FILES}; do \
>X		${LATEX_CMD} ${LATEX_ARGS} $$file; \
>X	done
>X
>X.if ${LATEX_NO_DEPENDS} == "NO"
>XBUILD_DEPENDS+=	latex:${PORTSDIR}/print/teTeX
>XRUN_DEPENDS+=	latex:${PORTSDIR}/print/teTeX
>X.endif
>X
>X.if ${LATEX_NO_WRKSUBDIR} == "NO"
>XNO_WRKSUBDIR=
>X.endif
>X
>X.if ${LATEX_NO_DOC_BUILD} == "NO"
>Xdo-build: latex-doc-build
>Xlatex-doc-build:
>X# 3 latex runs to get cross-references right.
>X# XXX could beter determine how many latex runs are required.
>X# XXX could have variables to build other formats (e.g. PS, PDF)
>X# Some people might by upset seeing all of LaTeX's normal warnings so
>X# punt the output to /dev/null
>X	@cd ${BUILD_WRKSRC}; for file in ${LATEX_DTX_FILES}; do \
>X		for i in 1 2 3; do \
>X			${ECHO} "${LATEX_CMD} ${LATEX_ARGS} $$file"; \
>X			${LATEX_CMD} ${LATEX_ARGS} $$file > /dev/null; \
>X		done; \
>X	done
>X.endif
>X
>Xdo-install: latex-lyx-reconfig
>X
>Xlatex-install:
>X.if ${LATEX_NO_INSTALL} == "NO"
>X	${MKDIR} ${LATEX_INSTALL_DIR}
>X	cd ${INSTALL_WRKSRC}; ${INSTALL_DATA} ${LATEX_INSTALL_FILES} \
>X			${LATEX_INSTALL_DIR}
>X.endif
>X
>Xlatex-doc-install:
>X.if ${LATEX_NO_DOC_INSTALL} == "NO"
>X	${MKDIR} ${LATEX_INSTALL_DOC_DIR}
>X	cd ${INSTALL_WRKSRC}; ${INSTALL_DATA} ${LATEX_INSTALL_DOC_FILES} \
>X			${LATEX_INSTALL_DOC_DIR}
>X.endif
>X
>Xlatex-rehash: latex-install latex-doc-install
>X.if ${LATEX_REHASH} == "YES"
>X	texconfig rehash
>X.endif
>X
>Xlatex-lyx-reconfig: latex-rehash
>X.if ${LATEX_LYX_RECONFIG} == "YES"
>X	@if [ -x ${PREFIX}/share/lyx/configure ]; then \
>X		cd ${PREFIX}/share/lyx; ./configure; \
>X	fi
>X.endif
>X
>X.if ${LATEX_NO_DOC_INSTALL} == "NO"
>Xpost-install: latex-doc-install-notice
>Xlatex-doc-install-notice:
>X	@${ECHO} ""
>X	@${ECHO} "*** ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX} documenation has been installed in:"
>X	@${ECHO} "***         ${LATEX_INSTALL_DOC_DIR}"
>X	@${ECHO} ""
>X.endif
>X
>X.endif # Latex_Include
>END-of-Mk/bsd.latex.mk
>echo x - Mk/bsd.port.mk.patch
>sed 's/^X//' >Mk/bsd.port.mk.patch << 'END-of-Mk/bsd.port.mk.patch'
>XIndex: bsd.port.mk
>X===================================================================
>XRCS file: /cvs/FreeBSD/ports/Mk/bsd.port.mk,v
>Xretrieving revision 1.360
>Xdiff -u -t -r1.360 bsd.port.mk
>X--- bsd.port.mk	2000/11/16 13:06:25	1.360
>X+++ bsd.port.mk	2000/12/12 09:56:57
>X@@ -704,6 +704,10 @@
>X 
>X .if defined(USE_RUBY) || defined(USE_LIBRUBY)
>X .include "${PORTSDIR}/Mk/bsd.ruby.mk"
>X .endif
>X+
>X+.if defined(LATEX_PORTNAME)
>X+.include "${PORTSDIR}/Mk/bsd.latex.mk"
>X+.endif
>X 
>X .include "${PORTSDIR}/Mk/bsd.gnome.mk"
>END-of-Mk/bsd.port.mk.patch
>echo c - print/latex-foiltex
>mkdir -p print/latex-foiltex > /dev/null 2>&1
>echo x - print/latex-foiltex/pkg-comment
>sed 's/^X//' >print/latex-foiltex/pkg-comment << 'END-of-print/latex-foiltex/pkg-comment'
>XCollection of LaTeX files for making foils.
>END-of-print/latex-foiltex/pkg-comment
>echo x - print/latex-foiltex/Makefile
>sed 's/^X//' >print/latex-foiltex/Makefile << 'END-of-print/latex-foiltex/Makefile'
>X# New ports collection makefile for:	foiltex
>X# Date created:		Fri Dec  8 20:49:05 EST 2000
>X# Whom:			Dave Chapeskie <bsdport@ddm.crosswinds.net>
>X#
>X# $FreeBSD$
>X#
>X
>XPORTNAME=	foiltex
>XPORTVERSION=	2.1.3
>XCATEGORIES=	print
>XMASTER_SITES=	${LATEX_MASTER_SITES}
>XMASTER_SITE_SUBDIR=     macros/latex/contrib/supported/${PORTNAME}
>XDISTFILES=	${LATEX_DISTFILES}
>X
>XMAINTAINER=	bsdport@ddm.crosswinds.net
>X
>XLATEX_PORTNAME=	${PORTNAME}
>XLATEX_LYX_RECONFIG=	YES
>X
>XLATEX_INSTALL_FILES=	foils.cls foil17.clo foil20.clo foil30.clo \
>X			fltfonts.def foils.sty
>X
>XLATEX_INSTALL_DOC_FILES=${LATEX}.dtx ${PORTNAME}.dvi \
>X			sampfoil.tex
>X
>X.include <bsd.port.mk>
>END-of-print/latex-foiltex/Makefile
>echo x - print/latex-foiltex/distinfo
>sed 's/^X//' >print/latex-foiltex/distinfo << 'END-of-print/latex-foiltex/distinfo'
>XMD5 (foiltex.dtx) = 3f45061a71b4b4c5974277f48c7b7495
>XMD5 (foiltex.ins) = 3d6ddb022e06c68d59c348efcfedeb09
>END-of-print/latex-foiltex/distinfo
>echo x - print/latex-foiltex/pkg-descr
>sed 's/^X//' >print/latex-foiltex/pkg-descr << 'END-of-print/latex-foiltex/pkg-descr'
>XThe FoilTeX is a collection of LaTeX files for making foils.  A number
>Xof features are built-in including large sans serif font as normal
>Xfont, options for setting normalsize at 20pt (default), 17pt, 25pt or
>X30pt, new macros for starting new foils, for special environments like
>XTheorem and Proof, simple macros to control the headline and footline.
>XWith Rokicki's dvips or Y&Y's dvipsone, it will even rotate individual
>Xfoils easily.  More in formation can be found in the documentation
>X(foiltex.dtx, a LaTeX2e file).
>END-of-print/latex-foiltex/pkg-descr
>echo x - print/latex-foiltex/pkg-plist
>sed 's/^X//' >print/latex-foiltex/pkg-plist << 'END-of-print/latex-foiltex/pkg-plist'
>Xshare/texmf/doc/latex/foiltex/foiltex.dtx
>Xshare/texmf/doc/latex/foiltex/foiltex.dvi
>Xshare/texmf/doc/latex/foiltex/sampfoil.tex
>Xshare/texmf/tex/latex/foiltex/fltfonts.def
>Xshare/texmf/tex/latex/foiltex/foil17.clo
>Xshare/texmf/tex/latex/foiltex/foil20.clo
>Xshare/texmf/tex/latex/foiltex/foil30.clo
>Xshare/texmf/tex/latex/foiltex/foils.cls
>Xshare/texmf/tex/latex/foiltex/foils.sty
>X@dirrm share/texmf/doc/latex/foiltex
>X@dirrm share/texmf/tex/latex/foiltex
>X@exec env PATH=$PATH:%D/bin %D/bin/texconfig rehash
>X@unexec env PATH=$PATH:%D/bin %D/bin/texconfig rehash
>END-of-print/latex-foiltex/pkg-plist
>echo x - print/latex-foiltex/Makefile.standalone
>sed 's/^X//' >print/latex-foiltex/Makefile.standalone << 'END-of-print/latex-foiltex/Makefile.standalone'
>X# New ports collection makefile for:	foiltex
>X# Date created:		Fri Dec  8 20:49:05 EST 2000
>X# Whom:			Dave Chapeskie <bsdport@ddm.crosswinds.net>
>X#
>X# $FreeBSD$
>X#
>X
>XPORTNAME=	foiltex
>XPORTVERSION=	2.1.3
>XCATEGORIES=	print
>XMASTER_SITES=	${MASTER_SITE_TEX_CTAN}
>XMASTER_SITE_SUBDIR=     macros/latex/contrib/supported/${PORTNAME}
>XDISTFILES=	${PORTNAME}.ins ${PORTNAME}.dtx
>XEXTRACT_ONLY=	${PORTNAME}.ins
>X
>XMAINTAINER=	bsdport@ddm.crosswinds.net
>X
>XBUILD_DEPENDS=	latex:${PORTSDIR}/print/teTeX
>XRUN_DEPENDS=	latex:${PORTSDIR}/print/teTeX
>X
>XNO_WRKSUBDIR=
>XEXTRACT_CMD=	${LN} -s ${DISTFILES:S?^?${DISTDIR}/?} ${WRKSRC}; latex
>XEXTRACT_BEFORE_ARGS=
>XEXTRACT_AFTER_ARGS=
>X
>X# 3 latex runs to get cross-references right
>Xdo-build:
>X	@cd ${BUILD_WRKSRC}; for i in 1 2 3; do \
>X			latex ${PORTNAME}.dtx; \
>X		done
>X
>XINSTALL_DIR=		${PREFIX}/share/texmf/tex/latex/${PORTNAME}
>XINSTALL_FILES=		foils.cls foil17.clo foil20.clo foil30.clo \
>X			fltfonts.def foils.sty
>X
>XINSTALL_DOCDIR=		${PREFIX}/share/texmf/doc/latex/${PORTNAME}
>XINSTALL_DOCFILES=	${PORTNAME}.dtx ${PORTNAME}.dvi
>XINSTALL_DOCFILES+=	sampfoil.tex
>X
>X# NO_TEX_REHASH is provide for the case were a person wants to install
>X# several TeX things like this and then manually rehash at the end.
>Xdo-install:
>X	${MKDIR} ${INSTALL_DIR}
>X	cd ${WRKSRC}; ${INSTALL_DATA} ${INSTALL_FILES} ${INSTALL_DIR}
>X	${MKDIR} ${INSTALL_DOCDIR}
>X	cd ${WRKSRC}; ${INSTALL_DATA} ${INSTALL_DOCFILES} ${INSTALL_DOCDIR}
>X.ifndef NO_TEX_REHASH
>X	texconfig rehash
>X.endif
>X.ifndef NO_LYX_RECONFIG
>X	@if [ -x ${PREFIX}/share/lyx/configure ]; then \
>X		cd ${PREFIX}/share/lyx; ./configure; \
>X	fi
>X.endif
>X	@${ECHO} ""
>X	@${ECHO} "*** ${PORTNAME} documenation has been installed in:"
>X	@${ECHO} "***         ${INSTALL_DOCDIR}"
>X
>X.include <bsd.port.mk>
>END-of-print/latex-foiltex/Makefile.standalone
>echo c - print/latex-dropping
>mkdir -p print/latex-dropping > /dev/null 2>&1
>echo x - print/latex-dropping/pkg-plist
>sed 's/^X//' >print/latex-dropping/pkg-plist << 'END-of-print/latex-dropping/pkg-plist'
>Xshare/texmf/doc/latex/dropping/dropping.dtx
>Xshare/texmf/doc/latex/dropping/dropping.dvi
>Xshare/texmf/tex/latex/dropping/dropping.sty
>X@dirrm share/texmf/doc/latex/dropping
>X@dirrm share/texmf/tex/latex/dropping
>X@exec env PATH=$PATH:%D/bin %D/bin/texconfig rehash
>X@unexec env PATH=$PATH:%D/bin %D/bin/texconfig rehash
>END-of-print/latex-dropping/pkg-plist
>echo x - print/latex-dropping/pkg-descr
>sed 's/^X//' >print/latex-dropping/pkg-descr << 'END-of-print/latex-dropping/pkg-descr'
>XDropping LaTeX package by Mats Dahlgren.
>X
>XThis LaTeX package defines a command, \dropping, to drop the first
>Xcharacter(s) of a paragraph.  It is based on Fred J. Lauwer's
>Xdropcaps.sty.  In short dropping is an automatization of dropcaps in
>Xthat the user does not need to know the internal nme of the font file
>X(the .tfm file) but can control this via the ordinary LaTeX 2e commands
>X(\rmfamily, etc).
>END-of-print/latex-dropping/pkg-descr
>echo x - print/latex-dropping/pkg-comment
>sed 's/^X//' >print/latex-dropping/pkg-comment << 'END-of-print/latex-dropping/pkg-comment'
>XLaTeX package for starting a paragraph with a dropped letter (or word).
>END-of-print/latex-dropping/pkg-comment
>echo x - print/latex-dropping/distinfo
>sed 's/^X//' >print/latex-dropping/distinfo << 'END-of-print/latex-dropping/distinfo'
>XMD5 (dropping.zip) = d992f61e9ad4fb7a7ff171e34a5a2301
>END-of-print/latex-dropping/distinfo
>echo x - print/latex-dropping/Makefile
>sed 's/^X//' >print/latex-dropping/Makefile << 'END-of-print/latex-dropping/Makefile'
>X# New ports collection makefile for:	dropping
>X# Date created:		Tue Dec 12 01:12:21 EST 2000
>X# Whom:			Dave Chapeskie <bsdport@ddm.crosswinds.net>
>X#
>X# $FreeBSD$
>X#
>X
>XPORTNAME=	dropping
>XPORTVERSION=	0.12a
>XCATEGORIES=	print
>XMASTER_SITES=	http://www.homenet.se/matsd/latex/
>XDISTNAME=	dropping
>X
>XMAINTAINER=	bsdport@ddm.crosswinds.net
>X
>XLATEX_PORTNAME=	${PORTNAME}
>XLATEX_NO_EXTRACT=
>XUSE_ZIP=	yes
>X
>X# More correctly this is part of extraction but we need
>X# to do a one line patch to the *.ins file first :(
>Xpost-patch:	latex-extract
>X
>X.include <bsd.port.mk>
>END-of-print/latex-dropping/Makefile
>echo c - print/latex-dropping/files
>mkdir -p print/latex-dropping/files > /dev/null 2>&1
>echo x - print/latex-dropping/files/patch-aa
>sed 's/^X//' >print/latex-dropping/files/patch-aa << 'END-of-print/latex-dropping/files/patch-aa'
>X--- dropping.ins.orig	Fri Jun  5 17:03:28 1998
>X+++ dropping.ins	Tue Dec 12 01:43:00 2000
>X@@ -46,7 +46,6 @@
>X %  It is my sincere hope that condition (3) is fullfilled in the
>X %  documentation.  -md  
>X %  
>X-\NeesTeXFormat{LaTeX2e}[1996/12/01]
>X \def\batchfile{dropping.ins}
>X \input docstrip.tex
>X 
>END-of-print/latex-dropping/files/patch-aa
>echo x - print/latex-dropping/Makefile.standalone
>sed 's/^X//' >print/latex-dropping/Makefile.standalone << 'END-of-print/latex-dropping/Makefile.standalone'
>X# New ports collection makefile for:	dropping
>X# Date created:		Tue Dec 12 01:12:21 EST 2000
>X# Whom:			Dave Chapeskie <bsdport@ddm.crosswinds.net>
>X#
>X# $FreeBSD$
>X#
>X
>XPORTNAME=	dropping
>XPORTVERSION=	0.12a
>XCATEGORIES=	print
>XMASTER_SITES=	http://www.homenet.se/matsd/latex/
>XDISTNAME=	dropping
>X
>XMAINTAINER=	bsdport@ddm.crosswinds.net
>X
>XBUILD_DEPENDS=	latex:${PORTSDIR}/print/teTeX
>XRUN_DEPENDS=	latex:${PORTSDIR}/print/teTeX
>X
>XUSE_ZIP=	yes
>XNO_WRKSUBDIR=
>X
>X# More correctly this is part of extraction but we need
>X# to do a one line patch to the *.ins file first :(
>Xpost-patch:
>X	cd ${WRKSRC}; latex ${PORTNAME}.ins
>X
>Xdo-build:
>X	cd ${BUILD_WRKSRC}; latex ${PORTNAME}.dtx;
>X
>XINSTALL_DIR=		${PREFIX}/share/texmf/tex/latex/${PORTNAME}
>XINSTALL_FILES=		${PORTNAME}.sty
>X
>XINSTALL_DOCDIR=		${PREFIX}/share/texmf/doc/latex/${PORTNAME}
>XINSTALL_DOCFILES=	${PORTNAME}.dtx ${PORTNAME}.dvi
>X
>X# NO_TEX_REHASH is provided for the case were a person wants to install
>X# several TeX things like this and then manually rehash at the end.
>Xdo-install:
>X	${MKDIR} ${INSTALL_DIR}
>X	cd ${WRKSRC}; ${INSTALL_DATA} ${INSTALL_FILES} ${INSTALL_DIR}
>X	${MKDIR} ${INSTALL_DOCDIR}
>X	cd ${WRKSRC}; ${INSTALL_DATA} ${INSTALL_DOCFILES} ${INSTALL_DOCDIR}
>X.ifndef NO_TEX_REHASH
>X	texconfig rehash
>X.endif
>X	@${ECHO} ""
>X	@${ECHO} "*** ${PORTNAME} documenation has been installed in:"
>X	@${ECHO} "***         ${INSTALL_DOCDIR}"
>X
>X.include <bsd.port.mk>
>END-of-print/latex-dropping/Makefile.standalone
>exit

Actions: View

Attachments on bug 23499: 12058