Attachment 12171 Details for Bug 23681 – FreeBSD.dmesg

FreeBSD.dmesg

FreeBSD.dmesg (text/plain; charset=us-ascii), 14.75 KB, created by lmcclef on 2000-12-20 21:05:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: lmcclef

Created: 2000-12-20 21:05:34 UTC

Size: 14.75 KB

patch

obsolete

>Copyright (c) 1992-2000 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD 4.2-RELEASE #0: Tue Dec 19 18:40:58 EST 2000
>    root@lmcpc118634.pc:/usr/src/sys/compile/LMC
>Calibrating clock(s) ... TSC clock: 266707402 Hz, i8254 clock: 1193322 Hz
>CLK_USE_I8254_CALIBRATION not specified - using default frequency
>Timecounter "i8254"  frequency 1193182 Hz
>CLK_USE_TSC_CALIBRATION not specified - using old calibration method
>CPU: Pentium II/Pentium II Xeon/Celeron (266.68-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x650  Stepping = 0
>  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
>real memory  = 134176768 (131032K bytes)
>Physical memory chunk(s):
>0x00001000 - 0x0009efff, 647168 bytes (158 pages)
>0x00499000 - 0x07fedfff, 129323008 bytes (31573 pages)
>avail memory = 126046208 (123092K bytes)
>bios32: Found BIOS32 Service Directory header at 0xc00fa000
>bios32: Entry = 0xf0000 (c00f0000)  Rev = 0  Len = 1
>pcibios: PCI BIOS entry at 0x474
>pnpbios: Found PnP BIOS data at 0xc00fe2d0
>pnpbios: Entry = f0000:4ef2  Rev = 1.0
>pnpbios: Event flag at fe2f6
>pnpbios: OEM ID b9b0110e
>Other BIOS signatures found:
>ACPI: 000ffed0
>Preloaded elf kernel "kernel" at 0xc0480000.
>Pentium Pro MTRR support enabled
>md0: Malloc disk
>Creating DISK md0
>Math emulator present
>pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000060
>pci_open(1a):	mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=ae6c0e11)
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
>pci_open(1a):	mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=ae6c0e11)
>pcib0: <Host to PCI bridge> on motherboard
>found->	vendor=0x0e11, dev=0xae6c, revid=0x01
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	subordinatebus=0 	secondarybus=0
>	map[10]: type 1, range 32, base 50000000, size 28
>	map[14]: type 1, range 32, base 44000000, size 12
>found->	vendor=0x0e11, dev=0xae6c, revid=0x01
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	subordinatebus=1 	secondarybus=1
>found->	vendor=0x0e11, dev=0xae35, revid=0x10
>	class=02-80-00, hdrtype=0x00, mfdev=0
>	subordinatebus=0 	secondarybus=0
>	intpin=a, irq=11
>	map[10]: type 1, range 32, base 00001010, size  4
>	map[14]: type 1, range 32, base 44100000, size  4
>found->	vendor=0x104c, dev=0xac16, revid=0x02
>	class=06-07-00, hdrtype=0x02, mfdev=1
>	subordinatebus=2 	secondarybus=2
>	intpin=a, irq=11
>	map[10]: type 1, range 32, base 7fffe000, size 12
>found->	vendor=0x104c, dev=0xac16, revid=0x02
>	class=06-07-00, hdrtype=0x02, mfdev=1
>	subordinatebus=3 	secondarybus=3
>	intpin=a, irq=11
>	map[10]: type 1, range 32, base 7ffff000, size 12
>found->	vendor=0x0e11, dev=0xae69, revid=0x03
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	subordinatebus=0 	secondarybus=0
>found->	vendor=0x0e11, dev=0xae33, revid=0x01
>	class=01-01-ea, hdrtype=0x00, mfdev=1
>	subordinatebus=0 	secondarybus=0
>	intpin=a, irq=0
>	map[10]: type 1, range 32, base 00000000, size  3
>	map[14]: type 1, range 32, base 00000000, size  2
>	map[18]: type 1, range 32, base 00000000, size  3
>	map[1c]: type 1, range 32, base 00000000, size  2
>	map[20]: type 1, range 32, base 00001000, size  4
>found->	vendor=0x0e11, dev=0xa0f8, revid=0x11
>	class=0c-03-10, hdrtype=0x00, mfdev=1
>	subordinatebus=0 	secondarybus=0
>	intpin=a, irq=11
>	map[10]: type 1, range 32, base 44080000, size 12
>found->	vendor=0x0e11, dev=0xae2b, revid=0x04
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	subordinatebus=0 	secondarybus=0
>found->	vendor=0x0e11, dev=0xae33, revid=0x03
>	class=01-01-da, hdrtype=0x00, mfdev=1
>	subordinatebus=0 	secondarybus=0
>	intpin=a, irq=0
>	map[10]: type 1, range 32, base 00000000, size  3
>	map[14]: type 1, range 32, base 00000000, size  2
>	map[18]: type 1, range 32, base 00000000, size  3
>	map[1c]: type 1, range 32, base 00000000, size  2
>	map[20]: type 1, range 32, base 00001020, size  4
>pci0: <PCI bus> on pcib0
>pcib1: <PCI to PCI bridge (vendor=0e11 device=ae6c)> at device 0.1 on pci0
>found->	vendor=0x5333, dev=0x8c01, revid=0x06
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	subordinatebus=0 	secondarybus=0
>	map[10]: type 1, range 32, base 40000000, size 26
>pci1: <PCI bus> on pcib1
>pci1: <S3 ViRGE MX graphics accelerator> (vendor=0x5333, dev=0x8c01) at 0.0
>tl0: <Compaq NetFlex-3/P Integrated> port 0x1010-0x101f mem 0x44100000-0x4410000f irq 11 at device 10.0 on pci0
>tl0: Ethernet address: 00:08:c7:37:22:f7
>miibus0: <MII bus> on tl0
>tlphy0: <ThunderLAN 10baseT media interface> on miibus0
>tlphy0:  10base2/BNC, 10base5/AUI, 10baseT, 10baseT-FDX, auto
>bpf: tl0 attached
>pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 12.0 on pci0
>pcic-pci0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
>pcic-pci0: Legacy address set to 0x3e0
>PCI Config space:
>00:  ac16104c 02100003 06070002 00824208
>10:  7fffe000 020000a0 00020200 00000000
>20:  00000000 00000000 00000000 00000000
>30:  00000000 00000000 00000000 03c0010b
>40:  b0480e11 000003e1 00000000 00000000
>50:  00000000 00000000 00000000 00000000
>60:  00000000 00000000 00000000 00000000
>70:  00000000 00000000 00000000 00000000
>80:  20449060 00000080 01898181 00000000
>90:  60640280 00000000 00000000 00000000
>Cardbus Socket registers:
>00:  00000006: 00000000: 30000410: 00000000:
>10:  00000000: 00000000: 00000000: 00000000:
>ExCa registers:
>00: 84 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 12.1 on pci0
>pcic-pci1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
>PCI Config space:
>00:  ac16104c 02100003 06070002 00824208
>10:  7ffff000 020000a0 00030300 00000000
>20:  00000000 00000000 00000000 00000000
>30:  00000000 00000000 00000000 03c0010b
>40:  b0480e11 000003e1 00000000 00000000
>50:  00000000 00000000 00000000 00000000
>60:  00000000 00000000 00000000 00000000
>70:  00000000 00000000 00000000 00000000
>80:  20449060 00000080 01898181 00000000
>90:  60640280 00000000 00000000 00000000
>Cardbus Socket registers:
>00:  00000000: 00000000: 30000006: 00000000:
>10:  00000000: 00000000: 00000000: 00000000:
>ExCa registers:
>00: 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>isab0: <PCI to ISA bridge (vendor=0e11 device=ae69)> at device 14.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Generic PCI ATA controller> port 0x1000-0x100f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 14.1 on pci0
>ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1000
>ata0: mask=03 status0=50 status1=00
>ata0: mask=03 ostat0=50 ostat2=00
>ata0-master: ATAPI probe a=00 b=00
>ata0-slave: ATAPI probe a=14 b=eb
>ata0: mask=03 status0=50 status1=00
>ata0-master: ATA probe a=01 b=a5
>ata0: devices=09
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1008
>ata1: mask=00 status0=ff status1=ff
>ata1: probe allocation failed
>ohci0: <OHCI (generic) USB controller> mem 0x44080000-0x44080fff irq 11 at device 14.2 on pci0
>ohci0: (New OHCI DeviceId=0xa0f80e11)
>	using shared irq11.
>usb0: OHCI version 1.0
>usb0: SMM does not respond, resetting
>usb0: <OHCI (generic) USB controller> on ohci0
>usb0: USB revision 1.0
>uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>isab1: <PCI to ISA bridge (vendor=0e11 device=ae2b)> at device 15.0 on pci0
>atapci1: <Generic PCI ATA controller> port 0x1020-0x102f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 15.1 on pci0
>ata-: ata0 exists, using next available unit number
>ata-: ata1 exists, using next available unit number
>ata2: probe allocation failed
>ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x1028
>ata3: mask=00 status0=ff status1=ff
>ata3: probe allocation failed
>eisa0: <EISA bus> on motherboard
>mainboard0: <DH@0000 (System Board)> on eisa0 slot 0
>ata-: ata0 exists, using next available unit number
>ata-: ata1 exists, using next available unit number
>Trying Read_Port at 203
>Trying Read_Port at 243
>Trying Read_Port at 283
>Trying Read_Port at 2c3
>Trying Read_Port at 303
>Trying Read_Port at 343
>Trying Read_Port at 383
>Trying Read_Port at 3c3
>isa_probe_children: disabling PnP devices
>isa_probe_children: probing non-PnP devices
>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>ata4 failed to probe at port 0x1f0 irq 14 on isa0
>ata5: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
>ata5: mask=00 status0=ff status1=ff
>ata5: probe allocation failed
>ata5 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
>adv0 failed to probe at port 0x330 on isa0
>bt0: Failed Status Reg Test - ff
>bt_isa_probe: Probe failed at 0x330
>bt0: Failed Status Reg Test - ff
>bt_isa_probe: Probe failed at 0x334
>bt0: Failed Status Reg Test - ff
>bt_isa_probe: Probe failed at 0x230
>bt0: Failed Status Reg Test - ff
>bt_isa_probe: Probe failed at 0x234
>bt0: Failed Status Reg Test - ff
>bt_isa_probe: Probe failed at 0x130
>bt0: Failed Status Reg Test - ff
>bt_isa_probe: Probe failed at 0x134
>bt0 failed to probe at port 0x134-0x137 on isa0
>aha0: status reg test failed ff
>aha0: status reg test failed ff
>aha0: status reg test failed ff
>aha0: status reg test failed ff
>aha0: status reg test failed ff
>aha0: status reg test failed ff
>aha0 failed to probe at port 0x134-0x137 on isa0
>aic0 failed to probe at port 0x140-0x15f on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0065
>atkbd: keyboard ID 0x41ab (2)
>kbdc: RESET_KBD return code:ffffffff
>kbdc: RESET_KBD return code:00fa
>kbdc: RESET_KBD status:00fa
>kbdc: DIAGNOSE status:0055
>kbdc: TEST_KBD_PORT status:0000
>atkbd: failed to reset the keyboard.
>device_probe_and_attach: atkbd0 attach returned 6
>psm0: current command byte:0065
>kbdc: TEST_AUX_PORT status:0000
>kbdc: RESET_AUX return code:00fa
>kbdc: RESET_AUX status:00aa
>kbdc: RESET_AUX ID:0000
>psm: status 00 02 64
>psm: status 90 03 3c
>psm: status 90 03 3c
>psm: status 90 03 3c
>psm: data 08 00 00
>psm: status 00 00 28
>psm: status 00 02 64
>psm: data 08 00 00
>psm: status 00 02 64
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
>psm0: config:00000000, flags:00000000, packet size:3
>psm0: syncmask:c0, syncbits:00
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>fb0: vga0, vga, type:VGA (5), flags:0x7007f
>fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
>fb0: init mode:24, bios mode:3, current mode:24
>fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
>VGA parameters upon power-up
>50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>VGA parameters in BIOS for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>EGA/VGA parameters to be used for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>atkbd: the current kbd controller command byte 0065
>atkbd: keyboard ID 0x41ab (2)
>kbdc: RESET_KBD return code:ffffffff
>kbdc: RESET_KBD return code:00fa
>kbdc: RESET_KBD status:00fa
>kbdc: DIAGNOSE status:0055
>kbdc: TEST_KBD_PORT status:0000
>atkbd: failed to reset the keyboard.
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
>pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
>pcic0: Polling mode
>stat is 4c
>stat is 0
>pccard0: <PC Card bus -- kludge version> on pcic0
>pccard1: <PC Card bus -- kludge version> on pcic0
>pcic1: not probed (disabled)
>sio0: irq maps: 0x41 0x51 0x41 0x41
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A
>sio1: configured irq 3 not in bitmap of probed irqs 0x200
>sio1: irq maps: 0x41 0x241 0x41 0x41
>sio1 at port 0x2f8-0x2ff irq 3 on isa0
>sio1: type 16550A
>sio2: not probed (disabled)
>sio3: not probed (disabled)
>ppc0: parallel port found at 0x378
>ppc0: using extended I/O port range
>ppc0: EPP SPP
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
>plip0: <PLIP network interface> on ppbus0
>bpf: lp0 attached
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
>fe0 failed to probe at port 0x300-0x31f on isa0
>ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
>lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
>cs0 failed to probe at port 0x300 on isa0
>sn0 failed to probe at port 0x300 irq 10 on isa0
>sbc0: <ESS 688> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0
>pcm0: <ESS 18xx DSP> on sbc0
>pcm0: ESS1879 detected, newspeed
>pcm: setmap 8000, 1000; 0xc7b5e000 -> 8000
>pcm: setmap 9000, 1000; 0xc7b5f000 -> 9000
>isa_probe_children: probing PnP devices
>BIOS Geometries:
> 0:022aef3f 0..554=555 cylinders, 0..239=240 heads, 1..63=63 sectors
> 0 accounted for
>Device configuration finished.
>bpf: faith0 attached
>bpf: gif0 attached
>bpf: gif1 attached
>bpf: gif2 attached
>bpf: gif3 attached
>bpf: lo0 attached
>bpf: ppp0 attached
>new masks: bio 684840, tty 6310b8, net 6718b8
>bpf: sl0 attached
>Creating DISK ad0
>Creating DISK wd0
>ad0: <IBM-DKLA-24320/KL4UA47A> ATA-4 disk at ata0-master
>ad0: 4108MB (8415225 sectors), 8905 cyls, 15 heads, 63 S/T, 512 B/S
>ad0: 16 secs/int, 1 depth queue, BIOSDMA
>ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
>ad0: 4108MB <IBM-DKLA-24320> [8905/15/63] at ata0-master BIOSDMA
>ata0-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
>ata0-slave: success setting PIO4 on generic chip
>acd0: <CD-ROM CDR_U240/2.18> CDROM drive at ata0 as slave
>acd0: read 1722KB/s (4037KB/s), 256KB buffer, PIO4
>acd0: Reads: CD-DA
>acd0: Audio: play, 256 volume levels
>acd0: Mechanism: ejectable tray
>acd0: Medium: no/blank disc inside, unlocked
>Mounting root from ufs:/dev/ad0s1a
>pccard: card inserted, slot 0
>Slot 0 chg = 0x4
>ad0s1: type 0xa5, start 30240, end = 8406719, size 8376480 : OK
>ad0s3: type 0x12, start 63, end = 30239, size 30177 : OK
>start_init: trying /sbin/init
>splash: image decoder found: fade_saver
>Linux-ELF exec handler installed
>pcic: I/O win 0 flags 17 240-24f
>pcic: I/O win 0 flags 7 240-24f
>ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 10 slot 0 on pccard0
>pcic: I/O win 0 flags 17 240-24f
>ep0: Ethernet address 00:10:5a:8a:cb:e4
>bpf: ep0 attached

Actions: View

Attachments on bug 23681: 12171 | 12172 | 12173