MP Configuration Table version 1.4 found at 0xc00f0000
APIC: Using the MPTable enumerator.
SMP: Added CPU 0 (BSP)
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:15:25 UTC 2012
    root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Preloaded elf kernel "/boot/kernel/kernel" at 0xc12a0000.
Calibrating TSC clock ... TSC clock: 2992567387 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.57-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf43  Family = f  Model = 4  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
  AMD Features=0x20100000<NX,LM>
  TSC: P-state invariant

Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
real memory  = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001426000 - 0x00000000cc39afff, 3405205504 bytes (831349 pages)
avail memory = 3403509760 (3245 MB)
MPTable: <DELL     Dell DM051  >
Event timer "LAPIC" quality 400
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb93c
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4  Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
ioapic0: Changing APIC ID to 8
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 3 trigger: level
ioapic0: intpin 4 trigger: level
ioapic0: intpin 5 trigger: level
ioapic0: intpin 9 trigger: level
ioapic0: intpin 10 trigger: level
ioapic0: intpin 11 trigger: level
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: high
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=27708086)
pcibios: BIOS version 2.10
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2770, revid=0x02
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2771, revid=0x02
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: slot 1 INTA routed to irq 16
found->	vendor=0x8086, dev=0x27d8, revid=0x01
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xefffc000, size 14, enabled
pcib0: slot 27 INTA routed to irq 16
found->	vendor=0x8086, dev=0x27d0, revid=0x01
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: slot 28 INTA routed to irq 16
found->	vendor=0x8086, dev=0x27c8, revid=0x01
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	map[20]: type I/O Port, range 32, base 0xff80, size  5, enabled
pcib0: slot 29 INTA routed to irq 21
found->	vendor=0x8086, dev=0x27c9, revid=0x01
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=9
	map[20]: type I/O Port, range 32, base 0xff60, size  5, enabled
pcib0: slot 29 INTB routed to irq 22
found->	vendor=0x8086, dev=0x27ca, revid=0x01
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=5
	map[20]: type I/O Port, range 32, base 0xff40, size  5, enabled
pcib0: slot 29 INTC routed to irq 18
found->	vendor=0x8086, dev=0x27cb, revid=0x01
	domain=0, bus=0, slot=29, func=3
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=4
	map[20]: type I/O Port, range 32, base 0xff20, size  5, enabled
pcib0: slot 29 INTD routed to irq 23
found->	vendor=0x8086, dev=0x27cc, revid=0x01
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xffa80800, size 10, enabled
pcib0: slot 29 INTA routed to irq 21
ehci early: SMM active, request owner change
found->	vendor=0x8086, dev=0x244e, revid=0xe1
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x27b8, revid=0x01
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x27df, revid=0x01
	domain=0, bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0xffa0, size  4, enabled
pcib0: slot 31 INTA routed to irq 16
found->	vendor=0x8086, dev=0x27c0, revid=0x01
	domain=0, bus=0, slot=31, func=2
	class=01-01-8f, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=3
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xfe00, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xfe10, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xfe20, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xfe30, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xfea0, size  4, enabled
	map[24]: type Memory, range 32, base 0, size 10, enabled
pcib0: slot 31 INTC routed to irq 20
found->	vendor=0x8086, dev=0x27da, revid=0x01
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=9
	map[20]: type I/O Port, range 32, base 0xece0, size  5, enabled
pcib0: slot 31 INTB routed to irq 17
pcib1: <MPTable PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xd000-0xdfff
pcib1:   memory decode     0xed000000-0xefefffff
pcib1:   prefetched decode 0xd0000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x10de, dev=0x0392, revid=0xa1
	domain=0, bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xed000000, size 24, enabled
pcib1: allocated memory range (0xed000000-0xedffffff) for rid 10 of pci0:1:0:0
	map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: allocated prefetch range (0xd0000000-0xdfffffff) for rid 14 of pci0:1:0:0
	map[1c]: type Memory, range 64, base 0xee000000, size 24, enabled
pcib1: allocated memory range (0xee000000-0xeeffffff) for rid 1c of pci0:1:0:0
	map[24]: type I/O Port, range 32, base 0xdc80, size  7, enabled
pcib1: allocated I/O port range (0xdc80-0xdcff) for rid 24 of pci0:1:0:0
pcib1: slot 0 INTA routed to irq 16
vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 16 at device 0.0 on pci1
hdac0: <Intel 82801G High Definition Audio Controller> mem 0xefffc000-0xefffffff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 48
hdac0: using IRQ 256 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib2: <MPTable PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   memory decode     0xecf00000-0xecffffff
pcib2:   no prefetched decode
pci2: <PCI bus> on pcib2
pci2: domain=0, physical bus=2
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 49
uhci0: LegSup = 0x0020
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
usbus1: bpf attached
uhci1: usbpf: Attached
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 51
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
usbus2: bpf attached
uhci2: usbpf: Attached
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
usbus3: bpf attached
uhci3: usbpf: Attached
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usbus4: bpf attached
ehci0: usbpf: Attached
pcib3: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xc000-0xcfff
pcib3:   memory decode     0xece00000-0xecefffff
pcib3:   no prefetched decode
pcib3:   Subtractively decoded bridge.
pci3: <PCI bus> on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x1102, dev=0x0002, revid=0x05
	domain=0, bus=3, slot=2, func=0
	class=04-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=5
	powerspec 1  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xcca0, size  5, enabled
pcib3: allocated I/O port range (0xcca0-0xccbf) for rid 10 of pci0:3:2:0
pcib3: slot 2 INTA routed to irq 18
found->	vendor=0x1102, dev=0x7002, revid=0x05
	domain=0, bus=3, slot=2, func=1
	class=09-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xcc90, size  3, enabled
pcib3: allocated I/O port range (0xcc90-0xcc97) for rid 10 of pci0:3:2:1
found->	vendor=0x14f1, dev=0x2f20, revid=0x00
	domain=0, bus=3, slot=3, func=0
	class=07-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=4
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xecef0000, size 16, enabled
pcib3: allocated memory range (0xecef0000-0xecefffff) for rid 10 of pci0:3:3:0
	map[14]: type I/O Port, range 32, base 0xcc98, size  3, enabled
pcib3: allocated I/O port range (0xcc98-0xcc9f) for rid 14 of pci0:3:3:0
pcib3: slot 3 INTA routed to irq 19
found->	vendor=0x8086, dev=0x27dc, revid=0x01
	domain=0, bus=3, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xeceef000, size 12, enabled
pcib3: allocated memory range (0xeceef000-0xeceeffff) for rid 10 of pci0:3:8:0
	map[14]: type I/O Port, range 32, base 0xccc0, size  6, enabled
pcib3: allocated I/O port range (0xccc0-0xccff) for rid 14 of pci0:3:8:0
pcib3: slot 8 INTA routed to irq 20
pci3: <multimedia, audio> at device 2.0 (no driver attached)
pci3: <input device> at device 2.1 (no driver attached)
pci3: <simple comms> at device 3.0 (no driver attached)
fxp0: <Intel 82801GB (ICH7) 10/100 Ethernet> port 0xccc0-0xccff mem 0xeceef000-0xeceeffff irq 20 at device 8.0 on pci3
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 27dc 1028 01ab 0001
fxp0: Dynamic Standby mode is enabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0: OUI 0x005500, model 0x0033, rev. 0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: bpf attached
fxp0: Ethernet address: 00:12:3f:b4:19:ee
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 53
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54
atapci1: <Intel ICH7 SATA300 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 20 at device 31.2 on pci0
atapci1: Lazy allocation of 0x400 bytes rid 0x24 type 3 at 0xcfe88c00
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
est0: enabling SpeedStep
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f2d00000f2d
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
ex_isa_identify()
pnpbios: 27 devices, largest 106 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0x7e0fffff, size=0x7e000000
PNP0c01: adding fixed memory32 range 0xffb00000-0xffffffff, size=0x500000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding io range 0x800-0x8df, size=0xe0, align=0x1
PNP0c01: adding io range 0xc00-0xc7f, size=0x80, align=0x1
PNP0c01: adding io range 0x62-0x63, size=0x2, align=0x1
PNP0c01: adding io range 0x65-0x6f, size=0xb, align=0x1
PNP0c01: adding io range 0xe0-0xef, size=0x10, align=0x1
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 4 device ID PNP0a03 (030ad041)
PNP0c02: adding fixed memory32 range 0xfed20000-0xfed9ffff, size=0x80000
pnpbios: handle 7 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xfeda0000-0xfedacfff, size=0xd000
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xf0000000-0xf3ffffff, size=0x4000000
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0103: adding fixed memory32 range 0xfed00000-0xfed003ff, size=0x400
pnpbios: handle 10 device ID PNP0103 (0301d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1
pnpbios: handle 11 device ID PNP0100 (0001d041)
PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1
PNP0200: adding io range 0-0x1f, size=0x20, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 12 device ID PNP0200 (0002d041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 13 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 14 device ID PNP0800 (0008d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1
pnpbios: handle 15 device ID PNP0b00 (000bd041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 16 device ID PNP0c04 (040cd041)
PNP0c02: adding fixed memory32 range 0xcfe88c00-0xcfffffff, size=0x177400
pnpbios: handle 17 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x100-0x1fe, size=0xff, align=0x10
PNP0c02: adding io range 0x200-0x277, size=0x78, align=0x10
PNP0c02: adding io range 0x280-0x2e7, size=0x68, align=0x10
PNP0c02: adding io range 0x2e8-0x2ef, size=0x8, align=0x8
PNP0c02: adding io range 0x2f0-0x2f7, size=0x8, align=0x10
PNP0c02: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0c02: adding io range 0x300-0x377, size=0x78, align=0x10
PNP0c02: adding io range 0x380-0x3bb, size=0x3c, align=0x10
pnpbios: handle 18 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x3c0-0x3e7, size=0x28, align=0x10
PNP0c02: adding io range 0x3f6-0x3f7, size=0x2, align=0x1
PNP0c02: adding io range 0x400-0x4cf, size=0xd0, align=0x10
PNP0c02: adding io range 0x4d2-0x57f, size=0xae, align=0x1
PNP0c02: adding io range 0x580-0x677, size=0xf8, align=0x10
PNP0c02: adding io range 0x680-0x777, size=0xf8, align=0x10
PNP0c02: adding io range 0x780-0x7bb, size=0x3c, align=0x10
PNP0c02: adding io range 0x7c0-0x7ff, size=0x40, align=0x10
pnpbios: handle 19 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x8e0-0x8ff, size=0x20, align=0x10
PNP0c02: adding io range 0x900-0x9fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa00-0xafe, size=0xff, align=0x10
PNP0c02: adding io range 0xb00-0xbfe, size=0xff, align=0x10
PNP0c02: adding io range 0xc80-0xcaf, size=0x30, align=0x10
PNP0c02: adding io range 0xcb0-0xcbf, size=0x10, align=0x10
PNP0c02: adding io range 0xcc0-0xcf7, size=0x38, align=0x10
PNP0c02: adding io range 0xd00-0xdfe, size=0xff, align=0x10
pnpbios: handle 20 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0xe00-0xefe, size=0xff, align=0x10
PNP0c02: adding io range 0xf00-0xffe, size=0xff, align=0x10
pnpbios: handle 21 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x2000-0x20fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2100-0x21fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2200-0x22fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2300-0x23fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2400-0x24fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2500-0x25fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2600-0x26fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2700-0x27fe, size=0xff, align=0x10
pnpbios: handle 22 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x2800-0x28fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2900-0x29fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2a00-0x2afe, size=0xff, align=0x10
PNP0c02: adding io range 0x2b00-0x2bfe, size=0xff, align=0x10
PNP0c02: adding io range 0x2c00-0x2cfe, size=0xff, align=0x10
PNP0c02: adding io range 0x2d00-0x2dfe, size=0xff, align=0x10
PNP0c02: adding io range 0x2e00-0x2efe, size=0xff, align=0x10
PNP0c02: adding io range 0x2f00-0x2ffe, size=0xff, align=0x10
pnpbios: handle 23 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x5000-0x50fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5100-0x51fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5200-0x52fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5300-0x53fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5400-0x54fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5500-0x55fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5600-0x56fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5700-0x57fe, size=0xff, align=0x10
pnpbios: handle 24 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x5800-0x58fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5900-0x59fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5a00-0x5afe, size=0xff, align=0x10
PNP0c02: adding io range 0x5b00-0x5bfe, size=0xff, align=0x10
PNP0c02: adding io range 0x5c00-0x5cfe, size=0xff, align=0x10
PNP0c02: adding io range 0x5d00-0x5dfe, size=0xff, align=0x10
PNP0c02: adding io range 0x5e00-0x5efe, size=0xff, align=0x10
PNP0c02: adding io range 0x5f00-0x5ffe, size=0xff, align=0x10
pnpbios: handle 25 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x6000-0x60fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6100-0x61fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6200-0x62fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6300-0x63fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6400-0x64fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6500-0x65fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6600-0x66fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6700-0x67fe, size=0xff, align=0x10
pnpbios: handle 26 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x6800-0x68fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6900-0x69fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6a00-0x6afe, size=0xff, align=0x10
PNP0c02: adding io range 0x6b00-0x6bfe, size=0xff, align=0x10
PNP0c02: adding io range 0x6c00-0x6cfe, size=0xff, align=0x10
PNP0c02: adding io range 0x6d00-0x6dfe, size=0xff, align=0x10
PNP0c02: adding io range 0x6e00-0x6efe, size=0xff, align=0x10
PNP0c02: adding io range 0x6f00-0x6ffe, size=0xff, align=0x10
pnpbios: handle 27 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0xa000-0xa0fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa100-0xa1fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa200-0xa2fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa300-0xa3fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa400-0xa4fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa500-0xa5fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa600-0xa6fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa700-0xa7fe, size=0xff, align=0x10
pnpbios: handle 28 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0xa800-0xa8fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa900-0xa9fe, size=0xff, align=0x10
PNP0c02: adding io range 0xaa00-0xaafe, size=0xff, align=0x10
PNP0c02: adding io range 0xab00-0xabfe, size=0xff, align=0x10
PNP0c02: adding io range 0xac00-0xacfe, size=0xff, align=0x10
PNP0c02: adding io range 0xad00-0xadfe, size=0xff, align=0x10
PNP0c02: adding io range 0xae00-0xaefe, size=0xff, align=0x10
PNP0c02: adding io range 0xaf00-0xaffe, size=0xff, align=0x10
pnpbios: handle 29 device ID PNP0c02 (020cd041)
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0
unknown: <PNP0103> failed to probe at iomem 0xfed00000-0xfed003ff pnpid PNP0103 on isa0
attimer0: <AT timer> at port 0x40-0x5f irq 0 pnpid PNP0100 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 55
Event timer "i8254" frequency 1193182 Hz quality 100
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0xffffffff (1)
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0
atrtc0: <AT realtime clock> at port 0x70-0x7f irq 8 pnpid PNP0b00 on isa0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Event timer "RTC" frequency 32768 Hz quality 0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xcfe88c00-0xcfffffff pnpid PNP0c02 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x100-0x1fe pnpid PNP0c02 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x3c0-0x3e7,0x3f6-0x3f7 pnpid PNP0c02 on isa0
ata: ata0 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata1 failed to probe at port 0x170 irq 15 on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xcfe88c00-0xcfffffff pnpid PNP0c02 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x100-0x1fe pnpid PNP0c02 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x3c0-0x3e7 pnpid PNP0c02 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f2d00000f2d
device_attach: est0 attach returned 6
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99752314 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Sigmatel STAC9221
hdac0:  HDA Codec ID: 0x83847680
hdac0:        Vendor: 0x8384
hdac0:        Device: 0x7680
hdac0:      Revision: 0x32
hdac0:      Stepping: 0x01
hdac0: PCI Subvendor: 0x01d21028
hdac0: 	Found audio FG nid=1 startnode=2 endnode=28 total=26
hdac0: 
hdac0: Processing audio FG cad=0 nid=1...
hdac0: GPIO: 0xc0000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
hdac0:  nid 10 0x0221101f as  1 seq 15    Headphones  Jack jack  1 loc  2 color   Black misc 0
hdac0:  nid 11 0x01019014 as  1 seq  4      Line-out  Jack jack  1 loc  1 color    Pink misc 0
hdac0:  nid 12 0x01011012 as  1 seq  2      Line-out  Jack jack  1 loc  1 color   Black misc 0
hdac0:  nid 13 0x01014010 as  1 seq  0      Line-out  Jack jack  1 loc  1 color   Green misc 0
hdac0:  nid 14 0x02a11020 as  2 seq  0           Mic  Jack jack  1 loc  2 color   Black misc 0
hdac0:  nid 15 0x01016011 as  1 seq  1      Line-out  Jack jack  1 loc  1 color  Orange misc 0
hdac0:  nid 16 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0
hdac0:  nid 17 0x40f000f1 as 15 seq  1         Other  None jack  0 loc  0 color Unknown misc 0
hdac0:  nid 21 0x0181332e as  2 seq 14       Line-in  Jack jack  1 loc  1 color    Blue misc 3
hdac0:  nid 27 0x40f000f2 as 15 seq  2         Other  None jack  0 loc  0 color Unknown misc 0
hdac0: Patched pins configuration:
hdac0:  nid 10 0x0221101f as  1 seq 15    Headphones  Jack jack  1 loc  2 color   Black misc 0
hdac0:  nid 11 0x01019014 as  1 seq  4      Line-out  Jack jack  1 loc  1 color    Pink misc 0
hdac0:  nid 12 0x01011012 as  1 seq  2      Line-out  Jack jack  1 loc  1 color   Black misc 0
hdac0:  nid 13 0x01014010 as  1 seq  0      Line-out  Jack jack  1 loc  1 color   Green misc 0
hdac0:  nid 14 0x02a11020 as  2 seq  0           Mic  Jack jack  1 loc  2 color   Black misc 0
hdac0:  nid 15 0x01016011 as  1 seq  1      Line-out  Jack jack  1 loc  1 color  Orange misc 0
hdac0:  nid 16 0x40f000f0 as 15 seq  0         Other  None jack  0 loc  0 color Unknown misc 0 [DISABLED]
hdac0:  nid 17 0x40f000f1 as 15 seq  1         Other  None jack  0 loc  0 color Unknown misc 0 [DISABLED]
hdac0:  nid 21 0x0181332e as  2 seq 14       Line-in  Jack jack  1 loc  1 color    Blue misc 3
hdac0:  nid 27 0x40f000f2 as 15 seq  2         Other  None jack  0 loc  0 color Unknown misc 0 [DISABLED]
hdac0: 2 associations found:
hdac0: Association 0 (1) out:
hdac0:  Pin nid=13 seq=0
hdac0:  Pin nid=15 seq=1
hdac0:  Pin nid=12 seq=2
hdac0:  Pin nid=11 seq=4
hdac0:  Pin nid=10 seq=15
hdac0: Association 1 (2) in:
hdac0:  Pin nid=14 seq=0
hdac0:  Pin nid=21 seq=14
hdac0: Tracing association 0 (1)
hdac0:  Pin 13 traced to DAC 2
hdac0:  Pin 15 traced to DAC 5
hdac0:  Pin 12 traced to DAC 3
hdac0:  Pin 11 traced to DAC 4
hdac0:  Pin 10 traced to DAC 2 and hpredir 0
hdac0: Association 0 (1) trace succeeded
hdac0: Tracing association 1 (2)
hdac0:  Pin 14 traced to ADC 6
hdac0:  Pin 21 traced to ADC 6
hdac0: Association 1 (2) trace succeeded
hdac0: Tracing input monitor
hdac0: Tracing other input monitors
hdac0:  Tracing nid 14 to out
hdac0:  Tracing nid 21 to out
hdac0: Tracing beeper
hdac0: Enabling headphone/speaker audio routing switching:
hdac0: 	as=0 sense nid=10 [UNSOL]
hdac0: Pin sense: nid=10 res=0x7fffffff
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdac0: 
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0: 
hdac0: Default Parameter
hdac0: -----------------
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e07e0
hdac0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0:          IN amp: 0x80050e00
hdac0:         OUT amp: 0x80027f7f
hdac0: 
hdac0:             nid: 2
hdac0:            Name: audio output
hdac0:      Widget cap: 0x000d0c05
hdac0:                  LRSWAP PWR STEREO
hdac0:     Association: 0 (0x00008001)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e07e0
hdac0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0:      Output amp: 0x80027f7f
hdac0:                  mute=1 step=127 size=2 offset=127
hdac0: 
hdac0:             nid: 3
hdac0:            Name: audio output
hdac0:      Widget cap: 0x000d0c05
hdac0:                  LRSWAP PWR STEREO
hdac0:     Association: 0 (0x00000004)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e07e0
hdac0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0:      Output amp: 0x80027f7f
hdac0:                  mute=1 step=127 size=2 offset=127
hdac0: 
hdac0:             nid: 4
hdac0:            Name: audio output
hdac0:      Widget cap: 0x000d0c05
hdac0:                  LRSWAP PWR STEREO
hdac0:     Association: 0 (0x00000010)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e07e0
hdac0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0:      Output amp: 0x80027f7f
hdac0:                  mute=1 step=127 size=2 offset=127
hdac0: 
hdac0:             nid: 5
hdac0:            Name: audio output
hdac0:      Widget cap: 0x000d0c05
hdac0:                  LRSWAP PWR STEREO
hdac0:     Association: 0 (0x00000002)
hdac0:             OSS: pcm (pcm)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e07e0
hdac0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0:      Output amp: 0x80027f7f
hdac0:                  mute=1 step=127 size=2 offset=127
hdac0: 
hdac0:             nid: 6
hdac0:            Name: audio input
hdac0:      Widget cap: 0x001d0541
hdac0:                  PWR PROC STEREO
hdac0:     Association: 1 (0x00004001)
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e07e0
hdac0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=23 [audio selector]
hdac0: 
hdac0:             nid: 7 [DISABLED]
hdac0:            Name: audio input
hdac0:      Widget cap: 0x001d0541
hdac0:                  PWR PROC STEREO
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e07e0
hdac0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=24 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 8 [DISABLED]
hdac0:            Name: audio output
hdac0:      Widget cap: 0x00040211
hdac0:                  DIGITAL STEREO
hdac0:      Stream cap: 0x00000005
hdac0:                  AC3 PCM
hdac0:         PCM cap: 0x000e07e0
hdac0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: 
hdac0:             nid: 9 [DISABLED]
hdac0:            Name: audio input
hdac0:      Widget cap: 0x00140311
hdac0:                  DIGITAL STEREO
hdac0:      Stream cap: 0x00000005
hdac0:                  AC3 PCM
hdac0:         PCM cap: 0x000e0160
hdac0:                  16 20 24 bits, 44 48 96 KHz
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=17 [pin: Other (None)] [DISABLED]
hdac0: 
hdac0:             nid: 10
hdac0:            Name: pin: Headphones (Black Jack)
hdac0:      Widget cap: 0x00400181
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00008000)
hdac0:         Pin cap: 0x0000173f
hdac0:                  ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x0221101f
hdac0:     Pin control: 0x00000080 HP
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=2 [audio output]
hdac0: 
hdac0:             nid: 11
hdac0:            Name: pin: Line-out (Pink Jack)
hdac0:      Widget cap: 0x00400181
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00000010)
hdac0:         Pin cap: 0x00001737
hdac0:                  ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x01019014
hdac0:     Pin control: 0x00000040 OUT
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=4 [audio output]
hdac0: 
hdac0:             nid: 12
hdac0:            Name: pin: Line-out (Black Jack)
hdac0:      Widget cap: 0x00400181
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00000004)
hdac0:         Pin cap: 0x00001737
hdac0:                  ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x01011012
hdac0:     Pin control: 0x00000040 OUT
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=3 [audio output]
hdac0: 
hdac0:             nid: 13
hdac0:            Name: pin: Line-out (Green Jack)
hdac0:      Widget cap: 0x00400181
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00000001)
hdac0:         Pin cap: 0x0000173f
hdac0:                  ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0:      Pin config: 0x01014010
hdac0:     Pin control: 0x00000040 OUT
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=2 [audio output]
hdac0: 
hdac0:             nid: 14
hdac0:            Name: pin: Mic (Black Jack)
hdac0:      Widget cap: 0x00400081
hdac0:                  UNSOL STEREO
hdac0:     Association: 1 (0x00000001)
hdac0:             OSS: mic (mic)
hdac0:         Pin cap: 0x00000024
hdac0:                  PDC IN
hdac0:      Pin config: 0x02a11020
hdac0:     Pin control: 0x00000020 IN
hdac0: 
hdac0:             nid: 15
hdac0:            Name: pin: Line-out (Orange Jack)
hdac0:      Widget cap: 0x00400181
hdac0:                  UNSOL STEREO
hdac0:     Association: 0 (0x00000002)
hdac0:         Pin cap: 0x00000037
hdac0:                  ISC TRQD PDC OUT IN
hdac0:      Pin config: 0x01016011
hdac0:     Pin control: 0x00000040 OUT
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=5 [audio output]
hdac0: 
hdac0:             nid: 16 [DISABLED]
hdac0:            Name: pin: Other (None)
hdac0:      Widget cap: 0x00400301
hdac0:                  DIGITAL STEREO
hdac0:         Pin cap: 0x00000010
hdac0:                  OUT
hdac0:      Pin config: 0x40f000f0
hdac0:     Pin control: 0x00000000
hdac0:     connections: 3
hdac0:           |
hdac0:           + <- nid=8 [audio output] [DISABLED] (selected)
hdac0:           + <- nid=23 [audio selector]
hdac0:           + <- nid=25 [vendor widget] [DISABLED]
hdac0: 
hdac0:             nid: 17 [DISABLED]
hdac0:            Name: pin: Other (None)
hdac0:      Widget cap: 0x00430681
hdac0:                  PWR DIGITAL UNSOL STEREO
hdac0:         Pin cap: 0x00010024
hdac0:                  PDC IN EAPD
hdac0:      Pin config: 0x40f000f1
hdac0:     Pin control: 0x00000000
hdac0:            EAPD: 0x00000002
hdac0: 
hdac0:             nid: 18
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:     Association: 1 (0x00004001)
hdac0:             OSS: line, mic
hdac0:      Output amp: 0x00270400
hdac0:                  mute=0 step=4 size=39 offset=0
hdac0:     connections: 7
hdac0:           |
hdac0:           + <- nid=14 [pin: Mic (Black Jack)] (selected)
hdac0:           + <- nid=21 [pin: Line-in (Blue Jack)]
hdac0:           + [DISABLED] <- nid=15 [pin: Line-out (Orange Jack)]
hdac0:           + [DISABLED] <- nid=11 [pin: Line-out (Pink Jack)]
hdac0:           + [DISABLED] <- nid=12 [pin: Line-out (Black Jack)]
hdac0:           + [DISABLED] <- nid=13 [pin: Line-out (Green Jack)]
hdac0:           + [DISABLED] <- nid=10 [pin: Headphones (Black Jack)]
hdac0: 
hdac0:             nid: 19 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x0030010d
hdac0:                  STEREO
hdac0:      Output amp: 0x00270400
hdac0:                  mute=0 step=4 size=39 offset=0
hdac0:     connections: 7
hdac0:           |
hdac0:           + <- nid=14 [pin: Mic (Black Jack)] (selected)
hdac0:           + <- nid=21 [pin: Line-in (Blue Jack)]
hdac0:           + <- nid=15 [pin: Line-out (Orange Jack)]
hdac0:           + <- nid=11 [pin: Line-out (Pink Jack)]
hdac0:           + <- nid=12 [pin: Line-out (Black Jack)]
hdac0:           + <- nid=13 [pin: Line-out (Green Jack)]
hdac0:           + <- nid=10 [pin: Headphones (Black Jack)]
hdac0: 
hdac0:             nid: 20
hdac0:            Name: beep widget
hdac0:      Widget cap: 0x0070000c
hdac0:     Association: -2 (0x00000000)
hdac0:             OSS: speaker (speaker)
hdac0:      Output amp: 0x00170303
hdac0:                  mute=0 step=3 size=23 offset=3
hdac0: 
hdac0:             nid: 21
hdac0:            Name: pin: Line-in (Blue Jack)
hdac0:      Widget cap: 0x00400001
hdac0:                  STEREO
hdac0:     Association: 1 (0x00004000)
hdac0:             OSS: line (line)
hdac0:         Pin cap: 0x00000020
hdac0:                  IN
hdac0:      Pin config: 0x0181332e
hdac0:     Pin control: 0x00000020 IN
hdac0: 
hdac0:             nid: 22 [DISABLED]
hdac0:            Name: volume widget
hdac0:      Widget cap: 0x00600000
hdac0:     connections: 4
hdac0:           |
hdac0:           + <- nid=2 [audio output] (selected)
hdac0:           + <- nid=3 [audio output]
hdac0:           + <- nid=4 [audio output]
hdac0:           + <- nid=5 [audio output]
hdac0: 
hdac0:             nid: 23
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x00300903
hdac0:                  LRSWAP STEREO
hdac0:     Association: 1 (0x00004001)
hdac0:             OSS: line, mic
hdac0:       Input amp: 0x80050e00
hdac0:                  mute=1 step=14 size=5 offset=0
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=18 [audio selector]
hdac0: 
hdac0:             nid: 24 [DISABLED]
hdac0:            Name: audio selector
hdac0:      Widget cap: 0x00300903
hdac0:                  LRSWAP STEREO
hdac0:       Input amp: 0x80050e00
hdac0:                  mute=1 step=14 size=5 offset=0
hdac0:     connections: 1
hdac0:           |
hdac0:           + [DISABLED] <- nid=19 [audio selector] [DISABLED]
hdac0: 
hdac0:             nid: 25 [DISABLED]
hdac0:            Name: vendor widget
hdac0:      Widget cap: 0x00f30201
hdac0:                  DIGITAL STEREO
hdac0: 
hdac0:             nid: 26 [DISABLED]
hdac0:            Name: audio output
hdac0:      Widget cap: 0x00030201
hdac0:                  DIGITAL STEREO
hdac0:      Stream cap: 0x00000001
hdac0:                  PCM
hdac0:         PCM cap: 0x000e07e0
hdac0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: 
hdac0:             nid: 27 [DISABLED]
hdac0:            Name: pin: Other (None)
hdac0:      Widget cap: 0x00400301
hdac0:                  DIGITAL STEREO
hdac0:         Pin cap: 0x00000010
hdac0:                  OUT
hdac0:      Pin config: 0x40f000f2
hdac0:     Pin control: 0x00000000
hdac0:     connections: 1
hdac0:           |
hdac0:           + <- nid=26 [audio output] [DISABLED]
hdac0: 
pcm0: <HDA Sigmatel STAC9221 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0: 
pcm0: Playback:
pcm0: 
pcm0:      Stream cap: 0x00000001
pcm0:                  PCM
pcm0:         PCM cap: 0x000e07e0
pcm0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
pcm0:             DAC: 2 5 3 4
pcm0: 
pcm0: Record:
pcm0: 
pcm0:      Stream cap: 0x00000001
pcm0:                  PCM
pcm0:         PCM cap: 0x000e07e0
pcm0:                  16 20 24 bits, 44 48 88 96 176 192 KHz
pcm0:             ADC: 6
pcm0: 
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0: 
pcm0: Playback:
pcm0: 
pcm0:     nid=13 [pin: Line-out (Green Jack)]
pcm0:       |
pcm0:       + <- nid=2 [audio output] [src: pcm]
pcm0: 
pcm0:     nid=15 [pin: Line-out (Orange Jack)]
pcm0:       |
pcm0:       + <- nid=5 [audio output] [src: pcm]
pcm0: 
pcm0:     nid=12 [pin: Line-out (Black Jack)]
pcm0:       |
pcm0:       + <- nid=3 [audio output] [src: pcm]
pcm0: 
pcm0:     nid=11 [pin: Line-out (Pink Jack)]
pcm0:       |
pcm0:       + <- nid=4 [audio output] [src: pcm]
pcm0: 
pcm0:     nid=10 [pin: Headphones (Black Jack)]
pcm0:       |
pcm0:       + <- nid=2 [audio output] [src: pcm]
pcm0: 
pcm0: Record:
pcm0: 
pcm0:     nid=6 [audio input]
pcm0:       |
pcm0:       + <- nid=23 [audio selector] [src: line, mic]
pcm0:              |
pcm0:              + <- nid=18 [audio selector] [src: line, mic]
pcm0:                     |
pcm0:                     + <- nid=14 [pin: Mic (Black Jack)] [src: mic]
pcm0:                     + <- nid=21 [pin: Line-in (Blue Jack)] [src: line]
pcm0: 
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0: 
pcm0: Master Volume (OSS: vol)
pcm0:    |
pcm0:    +- ctl  1 (nid   2 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl  2 (nid   3 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl  3 (nid   4 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl  4 (nid   5 out):    -95/0dB (128 steps) + mute
pcm0: 
pcm0: PCM Volume (OSS: pcm)
pcm0:    |
pcm0:    +- ctl  1 (nid   2 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl  2 (nid   3 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl  3 (nid   4 out):    -95/0dB (128 steps) + mute
pcm0:    +- ctl  4 (nid   5 out):    -95/0dB (128 steps) + mute
pcm0: 
pcm0: Speaker/Beep Volume (OSS: speaker)
pcm0:    |
pcm0:    +- ctl  7 (nid  20 out):    -18/0dB (4 steps)
pcm0: 
pcm0: Recording Level (OSS: rec)
pcm0:    |
pcm0:    +- ctl  5 (nid  18 out):    0/40dB (5 steps)
pcm0:    +- ctl  8 (nid  23 in   0): 0/21dB (15 steps) + mute
pcm0: 
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "rec":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap cc0f0000, 4000; 0xecbc0000 -> cc0f0000
pcm0: sndbuf_setmap cc100000, 4000; 0xecbd0000 -> cc100000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x80 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x80 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x30000
(aprobe0:ata0:0:0:0): SIGNATURE: eb14
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ata2: SATA reset: ports status=0x05
ata2: p0: SATA connect timeout status=00000000
ata2: p1: SATA connect timeout status=00000000
(aprobe0:ata0:0:1:0): SIGNATURE: eb14
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ata3: SATA reset: ports status=0x00
ata3: p0: SATA connect timeout status=00000000
ata3: p1: SATA connect timeout status=00000000
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <HL-DT-ST CDRW/DVD GCC4482 E107> Removable CD-ROM SCSI-0 device 
pass0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
pass1 at ata0 bus 0 scbus0 target 1 lun 0
pass1: <LITE-ON DVD+RW SOHW-822S VPPA> Removable CD-ROM SCSI-0 device 
pass1: Serial Number 2004070900035195
pass1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
Timecounter "TSC" frequency 2992567387 Hz quality 1000
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <HL-DT-ST CDRW/DVD GCC4482 E107> Removable CD-ROM SCSI-0 device 
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [256943 x 2048 byte records]
GEOM: new disk cd0
GEOM: new disk cd1
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(cd1:ata0:0:1:0): Retrying command (per sense data)
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata0:0:1:0): Error 6, Unretryable error
cd1 at ata0 bus 0 scbus0 target 1 lun 0
cd1: <LITE-ON DVD+RW SOHW-822S VPPA> Removable CD-ROM SCSI-0 device 
cd1: Serial Number 2004070900035195
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <vendor 0x0424> at usbus4
uhub5: <vendor 0x0424 product 0x2504, class 9/0, rev 2.00/0.01, addr 2> on usbus4
uhub5: 4 ports with 4 removable, self powered
ugen4.3: <Logitech> at usbus4
ums0: <Logitech USB Mouse, class 0/0, rev 1.10/6.20, addr 3> on usbus4
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 3 eb ae 0 0 1 0 
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this track)
(cd0:ata0:0:0:0): Error 6, Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata0:0:1:0): Error 6, Unretryable error
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata0:0:1:0): Error 6, Unretryable error
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata0:0:1:0): Error 6, Unretryable error
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
ums0: error reading report description
device_attach: ums0 attach returned 12
Root mount waiting for: usbus4
ugen4.4: <Dell> at usbus4
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 4> on usbus4
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
Root mount waiting for: usbus4
ugen4.5: <samsung> at usbus4
Trying to mount root from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]...
start_init: trying /sbin/init
ugen2.2: <vendor 0x2478> at usbus2
uplcom0: <vendor 0x2478 product 0x2008, class 0/0, rev 1.10/0.01, addr 2> on usbus2