Attachment 126808 Details for Bug 170573 – file.txt

file.txt

file.txt (text/plain), 8.77 KB, created by Yuval Prag on 2012-08-12 23:10:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Yuval Prag

Created: 2012-08-12 23:10:02 UTC

Size: 8.77 KB

patch

obsolete

>Copyright (c) 1992-2012 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 8.3-RELEASE #3: Sun Jul 29 12:09:04 PDT 2012
>    yprag1@.scu.edu:/usr/src/sys/i386/compile/GENERIC i386
>can't re-use a leaf (ipw)!
>can't re-use a leaf (iwi)!
>module_register: module pci/ipw already exists!
>Module pci/ipw failed to register: 17
>module_register: module pci/iwi already exists!
>Module pci/iwi failed to register: 17
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Pentium(R) M processor 1.50GHz (600.02-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x6d6  Family = 6  Model = d  Stepping = 6
>  Features=0xafe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
>  Features2=0x180<EST,TM2>
>real memory  = 1073741824 (1024 MB)
>avail memory = 998502400 (952 MB)
>ACPI APIC Table: <A M I  OEMAPIC >
>ioapic0: Changing APIC ID to 1
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
>ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
>module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0687190, 0) error 1
>ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
>ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
>module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0687250, 0) error 1
>ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
>ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
>module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0687310, 0) error 1
>ispfw: registered firmware <isp_1040>
>ispfw: registered firmware <isp_1040_it>
>ispfw: registered firmware <isp_1080>
>ispfw: registered firmware <isp_1080_it>
>ispfw: registered firmware <isp_12160>
>ispfw: registered firmware <isp_12160_it>
>ispfw: registered firmware <isp_2100>
>ispfw: registered firmware <isp_2200>
>ispfw: registered firmware <isp_2300>
>ispfw: registered firmware <isp_2322>
>ispfw: registered firmware <isp_2400>
>ispfw: registered firmware <isp_2400_multi>
>ispfw: registered firmware <isp_2500>
>ispfw: registered firmware <isp_2500_multi>
>kbd1 at kbdmux0
>acpi0: <A M I OEMRSDT> on motherboard
>acpi0: [ITHREAD]
>acpi0: Power Button (fixed)
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, 3df00000 (3) failed
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
>cpu0: <ACPI CPU> on acpi0
>acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <base peripheral> at device 0.1 (no driver attached)
>pci0: <base peripheral> at device 0.3 (no driver attached)
>vgapci0: <VGA-compatible display> port 0xdc00-0xdc07 mem 0xf0000000-0xf7ffffff,0xfeb00000-0xfeb7ffff irq 16 at device 2.0 on pci0
>agp0: <Intel 82855GME (855GME GMCH) SVGA controller> on vgapci0
>agp0: aperture size is 128M, detected 32636k stolen memory
>vgapci1: <VGA-compatible display> mem 0xe8000000-0xefffffff,0xfea80000-0xfeafffff at device 2.1 on pci0
>uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd480-0xd49f irq 16 at device 29.0 on pci0
>uhci0: [ITHREAD]
>uhci0: LegSup = 0x2f00
>usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
>uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd800-0xd81f irq 19 at device 29.1 on pci0
>uhci1: [ITHREAD]
>uhci1: LegSup = 0x2f00
>usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
>uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd880-0xd89f irq 18 at device 29.2 on pci0
>uhci2: [ITHREAD]
>uhci2: LegSup = 0x2f00
>usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
>ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0
>ehci0: [ITHREAD]
>usbus3: EHCI version 1.0
>usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
>pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xfe8fd000-0xfe8fdfff irq 18 at device 4.0 on pci1
>iwi0: [ITHREAD]
>cbb0: <RF5C475 PCI-CardBus Bridge> at device 5.0 on pci1
>cardbus0: <CardBus bus> on cbb0
>pccard0: <16-bit PCCard bus> on cbb0
>cbb0: [FILTER]
>fwohci0: <Ricoh R5C551> mem 0xfe8ff000-0xfe8ff7ff irq 16 at device 5.1 on pci1
>fwohci0: [ITHREAD]
>fwohci0: OHCI version 1.0 (ROM=1)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 00:e0:18:00:03:1e:09:af
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 02:e0:18:1e:09:af
>fwe0: Ethernet address: 02:e0:18:1e:09:af
>fwip0: <IP over FireWire> on firewire0
>fwip0: Firewire address: 00:e0:18:00:03:1e:09:af @ 0xfffe00000000, S400, maxrec 2048
>sbp0: <SBP-2/SCSI over FireWire> on firewire0
>dcons_crom0: <dcons configuration ROM> on firewire0
>dcons_crom0: bus_addr 0x14ac000
>fwohci0: Initiate bus reset
>fwohci0: fwohci_intr_core: BUS reset
>fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
>fxp0: <Intel 82801DB (ICH4) Pro/100 VM Ethernet> port 0xcc00-0xcc3f mem 0xfe8fe000-0xfe8fefff irq 20 at device 8.0 on pci1
>miibus0: <MII bus> on fxp0
>inphy0: <i82562EM 10/100 media interface> PHY 1 on miibus0
>inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>fxp0: Ethernet address: 00:11:2f:58:1d:63
>fxp0: [ITHREAD]
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
>ata0: <ATA channel> at channel 0 on atapci0
>ata0: [ITHREAD]
>ata1: <ATA channel> at channel 1 on atapci0
>ata1: [ITHREAD]
>pcm0: <Intel ICH4 (82801DB)> port 0xe000-0xe0ff,0xe100-0xe13f at device 31.5 on pci0
>pcm0: [ITHREAD]
>pcm0: <SigmaTel STAC9750/51 AC97 Codec>
>pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
>acpi_button0: <Sleep Button> on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_tz0: <Thermal Zone> on acpi0
>acpi_acad0: <AC Adapter> on acpi0
>battery0: <ACPI Control Method Battery> on acpi0
>battery1: <ACPI Control Method Battery> on acpi0
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbd0: [ITHREAD]
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: [ITHREAD]
>psm0: model Generic PS/2 mouse, device ID 0
>ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>ppc0: [ITHREAD]
>ppbus0: <Parallel port bus> on ppc0
>plip0: <PLIP network interface> on ppbus0
>plip0: [ITHREAD]
>lpt0: <Printer> on ppbus0
>lpt0: [ITHREAD]
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>pmtimer0 on isa0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xce7ff pnpid ORM0000 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
>uart1: [FILTER]
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>Timecounter "TSC" frequency 600024231 Hz quality 800
>Timecounters tick every 1.000 msec
>firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
>firewire0: bus manager 0 
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 12Mbps Full Speed USB v1.0
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>ugen0.1: <Intel> at usbus0
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <Intel> at usbus1
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ugen2.1: <Intel> at usbus2
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen3.1: <Intel> at usbus3
>uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>ad0: 38204MB <SAMSUNG MP0402H UC100-11> at ata0-master UDMA100 
>uhub0: 2 ports with 2 removable, self powered
>uhub1: 2 ports with 2 removable, self powered
>uhub2: 2 ports with 2 removable, self powered
>acd0: DVDR <MATSHITADVD-RAM UJ-810/C100> at ata1-master UDMA33 
>uhub3: 6 ports with 6 removable, self powered
>Trying to mount root from ufs:/dev/ad0s1a
>battery0: critically low charge!
>wlan0: Ethernet address: 00:0e:35:58:d4:23
>iwi0: need multicast update callback
>iwi0: need multicast update callback
>iwi0: need multicast update callback
>iwi0: firmware error

Actions: View

Attachments on bug 170573: 126808