Attachment 129788 Details for Bug 173840 – file.txt

file.txt

file.txt (text/plain), 63.37 KB, created by David Demelier on 2012-11-22 18:00:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Demelier

Created: 2012-11-22 18:00:00 UTC

Size: 63.37 KB

patch

obsolete

>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 4 timers, legacy route
>hpet0:  t0: irqs 0x00f00000 (0), 64bit, periodic
>hpet0:  t1: irqs 0x00f00000 (0)
>hpet0:  t2: irqs 0x00f00800 (0)
>hpet0:  t3: irqs 0x00f01000 (0)
>Timecounter "HPET" frequency 14318180 Hz quality 950
>ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49
>Event timer "HPET" frequency 14318180 Hz quality 450
>Event timer "HPET1" frequency 14318180 Hz quality 440
>Event timer "HPET2" frequency 14318180 Hz quality 440
>Event timer "HPET3" frequency 14318180 Hz quality 440
>cpu0: Processor \\_PR_.CPU0 (ACPI ID 0) -> APIC ID 0
>cpu0: <ACPI CPU> on acpi0
>ACPI: SSDT 0xbfcc6c18 00275 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0 00275 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
>ACPI: SSDT 0xbfcc4618 0057B (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0 0057B (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
>cpu1: Processor \\_PR_.CPU1 (ACPI ID 1) -> APIC ID 1
>cpu1: <ACPI CPU> on acpi0
>ACPI: SSDT 0xbfcc5e18 001D7 (v01  PmRef    ApIst 00003000 INTL 20060912)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0 001D7 (v01  PmRef    ApIst 00003000 INTL 20060912)
>ACPI: SSDT 0xbfcc6f18 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
>ACPI: Processor \\_PR_.CPU2 (ACPI ID 2) ignored
>ACPI: Processor \\_PR_.CPU3 (ACPI ID 3) ignored
>atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
>atrtc0: Warning: Couldn't map I/O.
>atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
>Event timer "RTC" frequency 32768 Hz quality 0
>attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 51
>Event timer "i8254" frequency 1193182 Hz quality 100
>ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  1 3 4 5 6 7 10 12 14 15
>  Validation          0   10   N     0  1 3 4 5 6 7 10 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  1 3 4 5 6 7 11 12 14 15
>  Validation          0   11   N     0  1 3 4 5 6 7 11 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  1 3 4 5 6 7 10 12 14 15
>  Validation          0   10   N     0  1 3 4 5 6 7 10 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  1 3 4 5 6 7 11 12 14 15
>  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  1 3 4 5 6 7 10 12 14 15
>  Validation          0   10   N     0  1 3 4 5 6 7 10 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  1 3 4 5 6 7 11 12 14 15
>  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  1 3 4 5 6 7 10 12 14 15
>  Validation          0   10   N     0  1 3 4 5 6 7 10 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  1 3 4 5 6 7 11 12 14 15
>  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: could not evaluate _ADR - AE_NOT_FOUND
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: Length mismatch for 3 range: 20000000 vs 20000001
>pcib0: decoding 3 range 0xc0000000-0xdfffffff
>pcib0: decoding 3 range 0xf0000000-0xfedfffff
>pcib0: Length mismatch for 3 range: 11ff000 vs 11fefff
>pcib0: decoding 3 range 0xfee01000-0xffffffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x8086, dev=0x2a40, revid=0x07
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x2a41, revid=0x07
>	domain=0, bus=0, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.1.INTA
>pcib0: slot 1 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x2937, revid=0x03
>	domain=0, bus=0, slot=26, func=0
>	class=0c-03-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[20]: type I/O Port, range 32, base 0x60c0, size  5, enabled
>pcib0: allocated type 4 (0x60c0-0x60df) for rid 20 of pci0:0:26:0
>pcib0: matched entry for 0.26.INTA
>pcib0: slot 26 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x2938, revid=0x03
>	domain=0, bus=0, slot=26, func=1
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=11
>	map[20]: type I/O Port, range 32, base 0x60a0, size  5, enabled
>pcib0: allocated type 4 (0x60a0-0x60bf) for rid 20 of pci0:0:26:1
>pcib0: matched entry for 0.26.INTB
>pcib0: slot 26 INTB hardwired to IRQ 17
>found->	vendor=0x8086, dev=0x2939, revid=0x03
>	domain=0, bus=0, slot=26, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=10
>	map[20]: type I/O Port, range 32, base 0x6080, size  5, enabled
>pcib0: allocated type 4 (0x6080-0x609f) for rid 20 of pci0:0:26:2
>pcib0: matched entry for 0.26.INTC
>pcib0: slot 26 INTC hardwired to IRQ 18
>found->	vendor=0x8086, dev=0x293c, revid=0x03
>	domain=0, bus=0, slot=26, func=7
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=10
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 32, base 0xd4504c00, size 10, enabled
>pcib0: allocated type 3 (0xd4504c00-0xd4504fff) for rid 10 of pci0:0:26:7
>pcib0: matched entry for 0.26.INTD
>pcib0: slot 26 INTD hardwired to IRQ 19
>found->	vendor=0x8086, dev=0x293e, revid=0x03
>	domain=0, bus=0, slot=27, func=0
>	class=04-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xd4500000, size 14, enabled
>pcib0: allocated type 3 (0xd4500000-0xd4503fff) for rid 10 of pci0:0:27:0
>pcib0: matched entry for 0.27.INTA
>pcib0: slot 27 INTA hardwired to IRQ 17
>found->	vendor=0x8086, dev=0x2940, revid=0x03
>	domain=0, bus=0, slot=28, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTA
>pcib0: slot 28 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x2942, revid=0x03
>	domain=0, bus=0, slot=28, func=1
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTB
>pcib0: slot 28 INTB hardwired to IRQ 17
>found->	vendor=0x8086, dev=0x2948, revid=0x03
>	domain=0, bus=0, slot=28, func=4
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTA
>pcib0: slot 28 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x294a, revid=0x03
>	domain=0, bus=0, slot=28, func=5
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTB
>pcib0: slot 28 INTB hardwired to IRQ 17
>found->	vendor=0x8086, dev=0x2934, revid=0x03
>	domain=0, bus=0, slot=29, func=0
>	class=0c-03-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[20]: type I/O Port, range 32, base 0x6060, size  5, enabled
>pcib0: allocated type 4 (0x6060-0x607f) for rid 20 of pci0:0:29:0
>pcib0: matched entry for 0.29.INTA
>pcib0: slot 29 INTA hardwired to IRQ 20
>found->	vendor=0x8086, dev=0x2935, revid=0x03
>	domain=0, bus=0, slot=29, func=1
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=10
>	map[20]: type I/O Port, range 32, base 0x6040, size  5, enabled
>pcib0: allocated type 4 (0x6040-0x605f) for rid 20 of pci0:0:29:1
>pcib0: matched entry for 0.29.INTB
>pcib0: slot 29 INTB hardwired to IRQ 22
>found->	vendor=0x8086, dev=0x2936, revid=0x03
>	domain=0, bus=0, slot=29, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=10
>	map[20]: type I/O Port, range 32, base 0x6020, size  5, enabled
>pcib0: allocated type 4 (0x6020-0x603f) for rid 20 of pci0:0:29:2
>pcib0: matched entry for 0.29.INTC
>pcib0: slot 29 INTC hardwired to IRQ 18
>found->	vendor=0x8086, dev=0x293a, revid=0x03
>	domain=0, bus=0, slot=29, func=7
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=10
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 32, base 0xd4504800, size 10, enabled
>pcib0: allocated type 3 (0xd4504800-0xd4504bff) for rid 10 of pci0:0:29:7
>pcib0: matched entry for 0.29.INTD
>pcib0: slot 29 INTD hardwired to IRQ 20
>found->	vendor=0x8086, dev=0x2448, revid=0x93
>	domain=0, bus=0, slot=30, func=0
>	class=06-04-01, hdrtype=0x01, mfdev=0
>	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x2919, revid=0x03
>	domain=0, bus=0, slot=31, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x2929, revid=0x03
>	domain=0, bus=0, slot=31, func=2
>	class=01-06-01, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 16 messages
>	map[10]: type I/O Port, range 32, base 0x60e8, size  3, enabled
>pcib0: allocated type 4 (0x60e8-0x60ef) for rid 10 of pci0:0:31:2
>	map[14]: type I/O Port, range 32, base 0x60f4, size  2, enabled
>pcib0: allocated type 4 (0x60f4-0x60f7) for rid 14 of pci0:0:31:2
>	map[18]: type I/O Port, range 32, base 0x60e0, size  3, enabled
>pcib0: allocated type 4 (0x60e0-0x60e7) for rid 18 of pci0:0:31:2
>	map[1c]: type I/O Port, range 32, base 0x60f0, size  2, enabled
>pcib0: allocated type 4 (0x60f0-0x60f3) for rid 1c of pci0:0:31:2
>	map[20]: type I/O Port, range 32, base 0x6000, size  5, enabled
>pcib0: allocated type 4 (0x6000-0x601f) for rid 20 of pci0:0:31:2
>	map[24]: type Memory, range 32, base 0xd4504000, size 11, enabled
>pcib0: allocated type 3 (0xd4504000-0xd45047ff) for rid 24 of pci0:0:31:2
>pcib0: matched entry for 0.31.INTA
>pcib0: slot 31 INTA hardwired to IRQ 21
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
>pcib0: allocated type 4 (0x5000-0x5fff) for rid 1c of pcib1
>pcib0: allocated type 3 (0xd4400000-0xd44fffff) for rid 20 of pcib1
>pcib0: allocated type 3 (0xc0000000-0xcfffffff) for rid 24 of pcib1
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0x5000-0x5fff
>pcib1:   memory decode     0xd4400000-0xd44fffff
>pcib1:   prefetched decode 0xc0000000-0xcfffffff
>pci1: <ACPI PCI bus> on pcib1
>pci1: domain=0, physical bus=1
>found->	vendor=0x1002, dev=0x9552, revid=0x00
>	domain=0, bus=1, slot=0, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled
>pcib1: allocated prefetch range (0xc0000000-0xcfffffff) for rid 10 of pci0:1:0:0
>	map[14]: type I/O Port, range 32, base 0x5000, size  8, enabled
>pcib1: allocated I/O port range (0x5000-0x50ff) for rid 14 of pci0:1:0:0
>	map[18]: type Memory, range 32, base 0xd4400000, size 16, enabled
>pcib1: allocated memory range (0xd4400000-0xd440ffff) for rid 18 of pci0:1:0:0
>pcib1: matched entry for 1.0.INTA
>pcib1: slot 0 INTA hardwired to IRQ 16
>found->	vendor=0x1002, dev=0xaa38, revid=0x00
>	domain=0, bus=1, slot=0, func=1
>	class=04-03-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=10
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 32, base 0xd4410000, size 14, enabled
>pcib1: allocated memory range (0xd4410000-0xd4413fff) for rid 10 of pci0:1:0:1
>pcib1: matched entry for 1.0.INTB
>pcib1: slot 0 INTB hardwired to IRQ 17
>vgapci0: <VGA-compatible display> port 0x5000-0x50ff mem 0xc0000000-0xcfffffff,0xd4400000-0xd440ffff irq 16 at device 0.0 on pci1
>acpi_video0: <ACPI video extension> on vgapci0
>found Internal/Integrated Digital Flat Panel(110), idx#0, port#1, detectable by BIOS, head #0
>found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, detectable by BIOS, head #0
>found TV/HDTV or Analog-Video Monitor(200), idx#0, port#0, detectable by BIOS, head #0
>found TV/HDTV or Analog-Video Monitor(210), idx#0, port#1, detectable by BIOS, head #0
>found TV/HDTV or Analog-Video Monitor(220), idx#0, port#2, detectable by BIOS, head #0
>drm0: <ATI Mobility Radeon 4300 Series> on vgapci0
>vgapci0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 256 to local APIC 0 vector 52
>vgapci0: using IRQ 256 for MSI
>info: [drm] MSI enabled 1 message(s)
>info: [drm] Initialized radeon 1.31.0 20080613
>hdac0: <ATI RV730 HDA Controller> mem 0xd4410000-0xd4413fff irq 17 at device 0.1 on pci1
>hdac0: PCI card vendor: 0x1002, device: 0xaa38
>hdac0: HDA Driver Revision: 20120126_0002
>hdac0: Config options: on=0x00000000 off=0x00000000
>hdac0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 257 to local APIC 0 vector 53
>hdac0: using IRQ 257 for MSI
>hdac0: Caps: OSS 1, ISS 0, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
>uhci0: <Intel 82801I (ICH9) USB controller> port 0x60c0-0x60df irq 16 at device 26.0 on pci0
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54
>usbus0 on uhci0
>uhci1: <Intel 82801I (ICH9) USB controller> port 0x60a0-0x60bf irq 17 at device 26.1 on pci0
>ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 55
>usbus1 on uhci1
>uhci2: <Intel 82801I (ICH9) USB controller> port 0x6080-0x609f irq 18 at device 26.2 on pci0
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 56
>usbus2 on uhci2
>ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd4504c00-0xd4504fff irq 19 at device 26.7 on pci0
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 57
>usbus3: EHCI version 1.0
>usbus3 on ehci0
>hdac1: <Intel 82801I HDA Controller> mem 0xd4500000-0xd4503fff irq 17 at device 27.0 on pci0
>hdac1: PCI card vendor: 0x103c, device: 0x3075
>hdac1: HDA Driver Revision: 20120126_0002
>hdac1: Config options: on=0x00000000 off=0x00000000
>hdac1: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 258 to local APIC 0 vector 58
>hdac1: using IRQ 258 for MSI
>hdac1: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
>pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>pcib0: allocated type 3 (0xd4300000-0xd43fffff) for rid 20 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   memory decode     0xd4300000-0xd43fffff
>pcib2:   no prefetched decode
>pci2: <ACPI PCI bus> on pcib2
>pci2: domain=0, physical bus=2
>pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
>pcib0: allocated type 3 (0xd4200000-0xd42fffff) for rid 20 of pcib3
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   memory decode     0xd4200000-0xd42fffff
>pcib3:   no prefetched decode
>pci3: <ACPI PCI bus> on pcib3
>pci3: domain=0, physical bus=3
>found->	vendor=0x168c, dev=0x002b, revid=0x01
>	domain=0, bus=3, slot=0, func=0
>	class=02-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D1 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xd4200000, size 16, enabled
>pcib3: allocated memory range (0xd4200000-0xd420ffff) for rid 10 of pci0:3:0:0
>pcib3: matched entry for 3.0.INTA
>pcib3: slot 0 INTA hardwired to IRQ 17
>ath0: <Atheros 9285> mem 0xd4200000-0xd420ffff irq 17 at device 0.0 on pci3
>ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: 2T2R
>ath0: 11ng MCS 20MHz
>ath0: MCS 0-7: 6.5Mbps - 65Mbps
>ath0: MCS 8-15: 13Mbps - 130Mbps
>ath0: AR9285 mac 192.2 RF5133 phy 14.0
>ath0: Use hw queue 1 for WME_AC_BE traffic
>ath0: Use hw queue 0 for WME_AC_BK traffic
>ath0: Use hw queue 2 for WME_AC_VI traffic
>ath0: Use hw queue 3 for WME_AC_VO traffic
>ath0: Use hw queue 8 for CAB traffic
>ath0: Use hw queue 9 for beacons
>ath0: using multicast key search
>pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
>pcib0: allocated type 4 (0x3000-0x4fff) for rid 1c of pcib4
>pcib0: allocated type 3 (0xd0200000-0xd41fffff) for rid 20 of pcib4
>pcib4:   domain            0
>pcib4:   secondary bus     4
>pcib4:   subordinate bus   68
>pcib4:   I/O decode        0x3000-0x4fff
>pcib4:   memory decode     0xd0200000-0xd41fffff
>pcib4:   no prefetched decode
>pci4: <ACPI PCI bus> on pcib4
>pci4: domain=0, physical bus=4
>pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
>pcib0: allocated type 4 (0x2000-0x2fff) for rid 1c of pcib5
>pcib0: allocated type 3 (0xd0100000-0xd01fffff) for rid 20 of pcib5
>pcib5:   domain            0
>pcib5:   secondary bus     69
>pcib5:   subordinate bus   69
>pcib5:   I/O decode        0x2000-0x2fff
>pcib5:   memory decode     0xd0100000-0xd01fffff
>pcib5:   no prefetched decode
>pci69: <ACPI PCI bus> on pcib5
>pci69: domain=0, physical bus=69
>found->	vendor=0x11ab, dev=0x436c, revid=0x10
>	domain=0, bus=69, slot=0, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 3  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xd0100000, size 14, enabled
>pcib5: allocated memory range (0xd0100000-0xd0103fff) for rid 10 of pci0:69:0:0
>	map[18]: type I/O Port, range 32, base 0x2000, size  8, enabled
>pcib5: allocated I/O port range (0x2000-0x20ff) for rid 18 of pci0:69:0:0
>pcib5: matched entry for 69.0.INTA
>pcib5: slot 0 INTA hardwired to IRQ 17
>mskc0: <Marvell Yukon 88E8072 Gigabit Ethernet> port 0x2000-0x20ff mem 0xd0100000-0xd0103fff irq 17 at device 0.0 on pci69
>mskc0: MSI count : 1
>mskc0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 259 to local APIC 0 vector 59
>mskc0: using IRQ 259 for MSI
>mskc0: RAM buffer size : 0KB
>msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> on mskc0
>msk0: bpf attached
>msk0: Ethernet address: 18:a9:05:87:38:0a
>miibus0: <MII bus> on msk0
>e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
>e1000phy0: OUI 0x000ac2, model 0x000b, rev. 1
>e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>uhci3: <Intel 82801I (ICH9) USB controller> port 0x6060-0x607f irq 20 at device 29.0 on pci0
>usbus4 on uhci3
>uhci4: <Intel 82801I (ICH9) USB controller> port 0x6040-0x605f irq 22 at device 29.1 on pci0
>ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 60
>usbus5 on uhci4
>uhci5: <Intel 82801I (ICH9) USB controller> port 0x6020-0x603f irq 18 at device 29.2 on pci0
>usbus6 on uhci5
>ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xd4504800-0xd4504bff irq 20 at device 29.7 on pci0
>usbus7: EHCI version 1.0
>usbus7 on ehci1
>pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pcib0: allocated type 3 (0xd0000000-0xd00fffff) for rid 20 of pcib6
>pcib6:   domain            0
>pcib6:   secondary bus     70
>pcib6:   subordinate bus   70
>pcib6:   memory decode     0xd0000000-0xd00fffff
>pcib6:   no prefetched decode
>pcib6:   Subtractively decoded bridge.
>pci70: <ACPI PCI bus> on pcib6
>pci70: domain=0, physical bus=70
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>ahci0: <Intel ICH9M AHCI SATA controller> port 0x60e8-0x60ef,0x60f4-0x60f7,0x60e0-0x60e7,0x60f0-0x60f3,0x6000-0x601f mem 0xd4504000-0xd45047ff irq 21 at device 31.2 on pci0
>ahci0: attempting to allocate 1 MSI vectors (16 supported)
>msi: routing MSI IRQ 260 to local APIC 0 vector 61
>ahci0: using IRQ 260 for MSI
>ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported
>ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM 4ports
>ahci0: Caps2:
>ahci0: EM Caps: ALHD XMT SMB LED
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich0: Caps:
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich1: Caps:
>ahcich2: not probed (disabled)
>ahcich3: not probed (disabled)
>ahcich4: not probed (disabled)
>ahcich5: <AHCI channel> at channel 5 on ahci0
>ahcich5: Caps: HPCP
>battery0: <ACPI Control Method Battery> on acpi0
>acpi_acad0: <AC Adapter> on acpi0
>acpi_button0: <Sleep Button> on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_wmi0: <ACPI-WMI mapping> on acpi0
>acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
>acpi_hp0: HP event GUID detected, installing event handler
>acpi_hp0: HP CMI GUID detected
>acpi_tz0: <Thermal Zone> on acpi0
>acpi_tz1: <Thermal Zone> on acpi0
>acpi_tz2: <Thermal Zone> on acpi0
>acpi_tz3: <Thermal Zone> on acpi0
>acpi_tz4: <Thermal Zone> on acpi0
>acpi_tz5: <Thermal Zone> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0067
>atkbd: keyboard ID 0x41ab (2)
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 62
>atkbd0: [GIANT-LOCKED]
>psm0: unable to allocate IRQ
>psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
>psm0: current command byte:0067
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 63
>psm0: [GIANT-LOCKED]
>psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons
>psm0: config:00004000, flags:00000008, packet size:6
>psm0: syncmask:c0, syncbits:00
>acpi0: wakeup code va 0xffffff80d64ae000 pa 0x90000
>pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>isa_probe_children: disabling PnP devices
>atkbdc: atkbdc0 already exists; skipping it
>atrtc: atrtc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>sc: sc0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
>sc0: <System console> at flags 0x180 on isa0
>sc0: VGA <16 virtual consoles, flags=0x380>
>sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
>pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
>fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
>ppc0 failed to probe at irq 7 on isa0
>pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
>uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
>pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
>uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>wbwd0 failed to probe on isa0
>isa_probe_children: probing PnP devices
>coretemp0: <CPU On-Die Thermal Sensors> on cpu0
>coretemp0: Setting TjMax=100
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>coretemp1: <CPU On-Die Thermal Sensors> on cpu1
>coretemp1: Setting TjMax=100
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>p4tcc1: <CPU Frequency Thermal Control> on cpu1
>Device configuration finished.
>procfs registered
>Timecounters tick every 1.000 msec
>Linux ELF exec handler installed
>lo0: bpf attached
>hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
>hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
>hdaa0: Subsystem ID: 0x00aa0100
>hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
>hdaa0: Original pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0:  3 18560010 1  0  Digital-out   Jack  Digital 0x18       Unknown 0
>hdaa0: Patched pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0:  3 18560010 1  0  Digital-out   Jack  Digital 0x18       Unknown 0
>hdaa0: 1 associations found:
>hdaa0: Association 0 (1) out:
>hdaa0:  Pin nid=3 seq=0
>hdaa0: Tracing association 0 (1)
>hdaa0:  Pin 3 traced to DAC 2
>hdaa0: Association 0 (1) trace succeeded
>hdaa0: Looking for additional DAC for association 0 (1)
>hdaa0: Tracing input monitor
>hdaa0: Tracing other input monitors
>hdaa0: Tracing beeper
>hdaa0: Pin sense: nid=3 sence=0x7fffffff (disconnected, ELD valid)
>hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>hdaa0: 
>hdaa0: +-------------------+
>hdaa0: | DUMPING HDA NODES |
>hdaa0: +-------------------+
>hdaa0: 
>hdaa0: Default Parameter
>hdaa0: -----------------
>hdaa0:      Stream cap: 0x00000001
>hdaa0:                  PCM
>hdaa0:         PCM cap: 0x00020070
>hdaa0:                  16 bits, 32 44 48 KHz
>hdaa0:          IN amp: 0x00000000
>hdaa0:         OUT amp: 0x00000000
>hdaa0: 
>hdaa0:             nid: 2
>hdaa0:            Name: audio output
>hdaa0:      Widget cap: 0x00000201
>hdaa0:                  DIGITAL STEREO
>hdaa0:     Association: 0 (0x00000001)
>hdaa0:             OSS: pcm (pcm)
>hdaa0:      Stream cap: 0x00000001
>hdaa0:                  PCM
>hdaa0:         PCM cap: 0x00020070
>hdaa0:                  16 bits, 32 44 48 KHz
>hdaa0: 
>hdaa0:             nid: 3
>hdaa0:            Name: pin: Digital-out (Jack)
>hdaa0:      Widget cap: 0x00400381
>hdaa0:                  DIGITAL UNSOL STEREO
>hdaa0:     Association: 0 (0x00000001)
>hdaa0:         Pin cap: 0x00000094
>hdaa0:                  PDC OUT HDMI
>hdaa0:      Pin config: 0x18560010
>hdaa0:     Pin control: 0x00000040 OUT
>hdaa0:     connections: 1
>hdaa0:           |
>hdaa0:           + <- nid=2 [audio output]
>hdaa0: 
>pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
>pcm0: +--------------------------------------+
>pcm0: | DUMPING PCM Playback/Record Channels |
>pcm0: +--------------------------------------+
>pcm0: 
>pcm0: Playback:
>pcm0: 
>pcm0:      Stream cap: 0x00000005
>pcm0:                  AC3 PCM
>pcm0:         PCM cap: 0x00020070
>pcm0:                  16 bits, 32 44 48 KHz
>pcm0:             DAC: 2
>pcm0: 
>pcm0: +-------------------------------+
>pcm0: | DUMPING Playback/Record Paths |
>pcm0: +-------------------------------+
>pcm0: 
>pcm0: Playback:
>pcm0: 
>pcm0:     nid=3 [pin: Digital-out (Jack)]
>pcm0:       |
>pcm0:       + <- nid=2 [audio output] [src: pcm]
>pcm0: 
>pcm0: +-------------------------+
>pcm0: | DUMPING Volume Controls |
>pcm0: +-------------------------+
>pcm0: 
>pcm0: Mixer "vol" -> "none": child=0x00000010
>pcm0: Mixer "pcm": parent="vol"
>pcm0: Soft PCM mixer ENABLED
>pcm0: clone manager: deadline=750ms flags=0x8000001e
>pcm0: sndbuf_setmap 3740000, 10000; 0xffffff80d64c2000 -> 3740000
>hdacc1: <Analog Devices AD1984A HDA CODEC> at cad 0 on hdac1
>hdaa1: <Analog Devices AD1984A Audio Function Group> at nid 1 on hdacc1
>hdaa1: Subsystem ID: 0x103c3075
>hdaa1: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
>hdaa1:  GPIO0: disabled
>hdaa1:  GPIO1: disabled
>hdaa1:  GPIO2: disabled
>hdaa1: WARNING: nid=42 has cnid outside of the AFG range j=0 entnum=4 index=0 res=0x00002701
>hdaa1: Original pins configuration:
>hdaa1: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa1: 17 02212040 4  0  Headphones    Jack  1/8     Front      Grey    0
>hdaa1: 18 410140f0 15 0  Line-out      None  1/8     Rear       Green   0
>hdaa1: 19 413711f0 15 0  CD            None  Analog  Rear       Black   1
>hdaa1: 20 02a12060 6  0  Mic           Jack  1/8     Front      Grey    0
>hdaa1: 21 91a71120 2  0  Mic           Fixed Analog  0x11       Black   1
>hdaa1: 22 92174110 1  0  Speaker       Fixed Analog  0x12       Green   1
>hdaa1: 23 41a6e130 3  0  Mic           None  Digital Rear       White   1
>hdaa1: 26 90f711f0 15 0  Other         Fixed Analog  Internal   Black   1
>hdaa1: 27 41561150 5  0  Digital-out   None  Digital Rear       Black   1
>hdaa1: 28 41813021 2  1  Line-in       None  1/8     Rear       Blue    0
>hdaa1: Patching widget caps nid=26 0x00400000 -> 0x00700000
>hdaa1: Patching pin config nid=17 0x02212040 -> 0x0221201f
>hdaa1: Patching pin config nid=20 0x02a12060 -> 0x02a12021
>hdaa1: Patched pins configuration:
>hdaa1: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa1: 17 0221201f 1  15 Headphones    Jack  1/8     Front      Grey    0
>hdaa1: 18 410140f0 15 0  Line-out      None  1/8     Rear       Green   0 DISA
>hdaa1: 19 413711f0 15 0  CD            None  Analog  Rear       Black   1 DISA
>hdaa1: 20 02a12021 2  1  Mic           Jack  1/8     Front      Grey    0
>hdaa1: 21 91a71120 2  0  Mic           Fixed Analog  0x11       Black   1
>hdaa1: 22 92174110 1  0  Speaker       Fixed Analog  0x12       Green   1
>hdaa1: 23 41a6e130 3  0  Mic           None  Digital Rear       White   1 DISA
>hdaa1: 27 41561150 5  0  Digital-out   None  Digital Rear       Black   1 DISA
>hdaa1: 28 41813021 2  1  Line-in       None  1/8     Rear       Blue    0 DISA
>hdaa1: 2 associations found:
>hdaa1: Association 0 (1) out:
>hdaa1:  Pin nid=22 seq=0
>hdaa1:  Pin nid=17 seq=15
>hdaa1: Association 1 (2) in:
>hdaa1:  Pin nid=21 seq=0
>hdaa1:  Pin nid=20 seq=1
>hdaa1: Tracing association 0 (1)
>hdaa1:  Pin 22 traced to DAC 3
>hdaa1:  Pin 17 traced to DAC 3 and hpredir 0
>hdaa1: Association 0 (1) trace succeeded
>hdaa1: Tracing association 1 (2)
>hdaa1:  Pin 21 traced to ADC 8
>hdaa1:  Pin 20 traced to ADC 9
>hdaa1: Association 1 (2) trace succeeded
>hdaa1: Looking for additional DAC for association 0 (1)
>hdaa1: Looking for additional ADC for association 1 (2)
>hdaa1: Tracing input monitor
>hdaa1: Tracing other input monitors
>hdaa1:  Tracing nid 20 to out
>hdaa1:  nid 20 is input monitor
>hdaa1:  Tracing nid 21 to out
>hdaa1:  nid 21 is input monitor
>hdaa1: Tracing beeper
>hdaa1:  nid 26 traced to out
>hdaa1: Headphones redirection for association 0 nid=17 using unsolicited responses.
>hdaa1: Redirect output to: main
>hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>hdaa1: 
>hdaa1: +-------------------+
>hdaa1: | DUMPING HDA NODES |
>hdaa1: +-------------------+
>hdaa1: 
>hdaa1: Default Parameter
>hdaa1: -----------------
>hdaa1:      Stream cap: 0x00000001
>hdaa1:                  PCM
>hdaa1:         PCM cap: 0x000e07ff
>hdaa1:                  16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz
>hdaa1:          IN amp: 0x80000000
>hdaa1:         OUT amp: 0x00052727
>hdaa1: 
>hdaa1:             nid: 2 [DISABLED]
>hdaa1:            Name: audio output
>hdaa1:      Widget cap: 0x00030211
>hdaa1:                  DIGITAL STEREO
>hdaa1:      Stream cap: 0x00000005
>hdaa1:                  AC3 PCM
>hdaa1:         PCM cap: 0x000e07e0
>hdaa1:                  16 20 24 bits, 44 48 88 96 176 192 KHz
>hdaa1: 
>hdaa1:             nid: 3
>hdaa1:            Name: audio output
>hdaa1:      Widget cap: 0x00000405
>hdaa1:                  PWR STEREO
>hdaa1:     Association: 0 (0x00008001)
>hdaa1:             OSS: pcm (pcm)
>hdaa1:      Stream cap: 0x00000001
>hdaa1:                  PCM
>hdaa1:         PCM cap: 0x000e07ff
>hdaa1:                  16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz
>hdaa1:      Output amp: 0x00052727
>hdaa1:                  mute=0 step=39 size=5 offset=39
>hdaa1: 
>hdaa1:             nid: 4 [DISABLED]
>hdaa1:            Name: audio output
>hdaa1:      Widget cap: 0x00000405
>hdaa1:                  PWR STEREO
>hdaa1:      Stream cap: 0x00000001
>hdaa1:                  PCM
>hdaa1:         PCM cap: 0x000e07ff
>hdaa1:                  16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz
>hdaa1:      Output amp: 0x00052727
>hdaa1:                  mute=0 step=39 size=5 offset=39
>hdaa1: 
>hdaa1:             nid: 5 [DISABLED]
>hdaa1:            Name: vendor widget
>hdaa1:      Widget cap: 0x00f00000
>hdaa1: 
>hdaa1:             nid: 6 [DISABLED]
>hdaa1:            Name: vendor widget
>hdaa1:      Widget cap: 0x00f00000
>hdaa1: 
>hdaa1:             nid: 7
>hdaa1:            Name: audio mixer
>hdaa1:      Widget cap: 0x00200103
>hdaa1:                  STEREO
>hdaa1:     Association: 0 (0x00008000)
>hdaa1:             OSS: pcm, speaker, mic, monitor
>hdaa1:       Input amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + <- nid=34 [audio selector]
>hdaa1:           + <- nid=33 [audio selector]
>hdaa1: 
>hdaa1:             nid: 8
>hdaa1:            Name: audio input
>hdaa1:      Widget cap: 0x00100501
>hdaa1:                  PWR STEREO
>hdaa1:     Association: 1 (0x00000001)
>hdaa1:      Stream cap: 0x00000001
>hdaa1:                  PCM
>hdaa1:         PCM cap: 0x000e07ff
>hdaa1:                  16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + <- nid=12 [audio selector]
>hdaa1: 
>hdaa1:             nid: 9
>hdaa1:            Name: audio input
>hdaa1:      Widget cap: 0x00100501
>hdaa1:                  PWR STEREO
>hdaa1:     Association: 1 (0x00000002)
>hdaa1:      Stream cap: 0x00000001
>hdaa1:                  PCM
>hdaa1:         PCM cap: 0x000e07ff
>hdaa1:                  16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + <- nid=13 [audio selector]
>hdaa1: 
>hdaa1:             nid: 10 [DISABLED]
>hdaa1:            Name: audio mixer
>hdaa1:      Widget cap: 0x00200103
>hdaa1:                  STEREO
>hdaa1:       Input amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + [DISABLED] <- nid=4 [audio output] [DISABLED]
>hdaa1:           + [DISABLED] <- nid=33 [audio selector]
>hdaa1: 
>hdaa1:             nid: 11
>hdaa1:            Name: audio mixer
>hdaa1:      Widget cap: 0x00200103
>hdaa1:                  STEREO
>hdaa1:     Association: 0 (0x00000001)
>hdaa1:             OSS: pcm, speaker, mic, monitor
>hdaa1:       Input amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + <- nid=15 [audio selector]
>hdaa1:           + <- nid=33 [audio selector]
>hdaa1: 
>hdaa1:             nid: 12
>hdaa1:            Name: audio selector
>hdaa1:      Widget cap: 0x0030010d
>hdaa1:                  STEREO
>hdaa1:     Association: 1 (0x00000001)
>hdaa1:             OSS: monitor
>hdaa1:      Output amp: 0x80053627
>hdaa1:                  mute=1 step=54 size=5 offset=39
>hdaa1:     connections: 6
>hdaa1:           |
>hdaa1:           + [DISABLED] <- nid=20 [pin: Mic (Grey Jack)]
>hdaa1:           + <- nid=21 [pin: Mic (Fixed)] (selected)
>hdaa1:           + [DISABLED] <- nid=22 [pin: Speaker (Fixed)]
>hdaa1:           + [DISABLED] <- nid=32 [audio mixer]
>hdaa1:           + [DISABLED] <- nid=37 [audio selector] [DISABLED]
>hdaa1:           + [DISABLED] <- nid=23 [pin: Mic (None)] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 13
>hdaa1:            Name: audio selector
>hdaa1:      Widget cap: 0x0030010d
>hdaa1:                  STEREO
>hdaa1:     Association: 1 (0x00000002)
>hdaa1:             OSS: mic
>hdaa1:      Output amp: 0x80053627
>hdaa1:                  mute=1 step=54 size=5 offset=39
>hdaa1:     connections: 6
>hdaa1:           |
>hdaa1:           + <- nid=20 [pin: Mic (Grey Jack)] (selected)
>hdaa1:           + [DISABLED] <- nid=21 [pin: Mic (Fixed)]
>hdaa1:           + [DISABLED] <- nid=22 [pin: Speaker (Fixed)]
>hdaa1:           + [DISABLED] <- nid=32 [audio mixer]
>hdaa1:           + [DISABLED] <- nid=37 [audio selector] [DISABLED]
>hdaa1:           + [DISABLED] <- nid=23 [pin: Mic (None)] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 14 [DISABLED]
>hdaa1:            Name: audio selector
>hdaa1:      Widget cap: 0x00300101
>hdaa1:                  STEREO
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + <- nid=3 [audio output] (selected)
>hdaa1:           + <- nid=4 [audio output] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 15
>hdaa1:            Name: audio selector
>hdaa1:      Widget cap: 0x00300101
>hdaa1:                  STEREO
>hdaa1:     Association: 0 (0x00000001)
>hdaa1:             OSS: pcm
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + <- nid=3 [audio output] (selected)
>hdaa1:           + [DISABLED] <- nid=4 [audio output] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 16
>hdaa1:            Name: beep widget
>hdaa1:      Widget cap: 0x0070000c
>hdaa1:     Association: -2 (0x00000000)
>hdaa1:             OSS: speaker (speaker)
>hdaa1:      Output amp: 0x800b0f0f
>hdaa1:                  mute=1 step=15 size=11 offset=15
>hdaa1: 
>hdaa1:             nid: 17
>hdaa1:            Name: pin: Headphones (Grey Jack)
>hdaa1:      Widget cap: 0x0040018d
>hdaa1:                  UNSOL STEREO
>hdaa1:     Association: 0 (0x00008000)
>hdaa1:         Pin cap: 0x0000001f
>hdaa1:                  ISC TRQD PDC HP OUT
>hdaa1:      Pin config: 0x0221201f
>hdaa1:     Pin control: 0x000000c0 HP OUT
>hdaa1:      Output amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + <- nid=7 [audio mixer]
>hdaa1: 
>hdaa1:             nid: 18 [DISABLED]
>hdaa1:            Name: pin: Line-out (None)
>hdaa1:      Widget cap: 0x0040058d
>hdaa1:                  PWR UNSOL STEREO
>hdaa1:         Pin cap: 0x0001001f
>hdaa1:                  ISC TRQD PDC HP OUT EAPD
>hdaa1:      Pin config: 0x410140f0
>hdaa1:     Pin control: 0x00000000
>hdaa1:            EAPD: 0x00000002
>hdaa1:      Output amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + [DISABLED] <- nid=10 [audio mixer] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 19 [DISABLED]
>hdaa1:            Name: pin: CD (None)
>hdaa1:      Widget cap: 0x0040050c
>hdaa1:                  PWR
>hdaa1:         Pin cap: 0x00010010
>hdaa1:                  OUT EAPD
>hdaa1:      Pin config: 0x413711f0
>hdaa1:     Pin control: 0x00000000
>hdaa1:            EAPD: 0x00000002
>hdaa1:      Output amp: 0x80051f1f
>hdaa1:                  mute=1 step=31 size=5 offset=31
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + [DISABLED] <- nid=31 [audio mixer] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 20
>hdaa1:            Name: pin: Mic (Grey Jack)
>hdaa1:      Widget cap: 0x0040008b
>hdaa1:                  UNSOL STEREO
>hdaa1:     Association: 1 (0x00000002)
>hdaa1:             OSS: mic (mic)
>hdaa1:         Pin cap: 0x00003727
>hdaa1:                  ISC TRQD PDC IN VREF[ 50 80 100 GROUND HIZ ]
>hdaa1:      Pin config: 0x02a12021
>hdaa1:     Pin control: 0x00000025 IN VREFs
>hdaa1:       Input amp: 0x00270300
>hdaa1:                  mute=0 step=3 size=39 offset=0
>hdaa1: 
>hdaa1:             nid: 21
>hdaa1:            Name: pin: Mic (Fixed)
>hdaa1:      Widget cap: 0x0040008b
>hdaa1:                  UNSOL STEREO
>hdaa1:     Association: 1 (0x00000001)
>hdaa1:             OSS: monitor (monitor)
>hdaa1:         Pin cap: 0x00003727
>hdaa1:                  ISC TRQD PDC IN VREF[ 50 80 100 GROUND HIZ ]
>hdaa1:      Pin config: 0x91a71120
>hdaa1:     Pin control: 0x00000025 IN VREFs
>hdaa1:       Input amp: 0x00270300
>hdaa1:                  mute=0 step=3 size=39 offset=0
>hdaa1: 
>hdaa1:             nid: 22
>hdaa1:            Name: pin: Speaker (Fixed)
>hdaa1:      Widget cap: 0x0040058d
>hdaa1:                  PWR UNSOL STEREO
>hdaa1:     Association: 0 (0x00000001)
>hdaa1:         Pin cap: 0x00010037
>hdaa1:                  ISC TRQD PDC OUT IN EAPD
>hdaa1:      Pin config: 0x92174110
>hdaa1:     Pin control: 0x00000040 OUT
>hdaa1:            EAPD: 0x00000002
>hdaa1:      Output amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + <- nid=11 [audio mixer]
>hdaa1: 
>hdaa1:             nid: 23 [DISABLED]
>hdaa1:            Name: pin: Mic (None)
>hdaa1:      Widget cap: 0x0040020b
>hdaa1:                  DIGITAL STEREO
>hdaa1:         Pin cap: 0x00000020
>hdaa1:                  IN
>hdaa1:      Pin config: 0x41a6e130
>hdaa1:     Pin control: 0x00000000
>hdaa1:       Input amp: 0x00170300
>hdaa1:                  mute=0 step=3 size=23 offset=0
>hdaa1: 
>hdaa1:             nid: 24 [DISABLED]
>hdaa1:            Name: vendor widget
>hdaa1:      Widget cap: 0x00f00100
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + <- nid=6 [vendor widget] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 25 [DISABLED]
>hdaa1:            Name: power widget
>hdaa1:      Widget cap: 0x00500500
>hdaa1:                  PWR
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + <- nid=32 [audio mixer] (selected)
>hdaa1:           + <- nid=33 [audio selector]
>hdaa1: 
>hdaa1:             nid: 26
>hdaa1:            Name: beep widget
>hdaa1:      Widget cap: 0x00700000
>hdaa1:     Association: -2 (0x00000000)
>hdaa1:             OSS: speaker (speaker)
>hdaa1:         Pin cap: 0x00000020
>hdaa1:                  IN
>hdaa1:      Pin config: 0x90f711f0
>hdaa1:     Pin control: 0x00000020 IN
>hdaa1: 
>hdaa1:             nid: 27 [DISABLED]
>hdaa1:            Name: pin: Digital-out (None)
>hdaa1:      Widget cap: 0x0040038d
>hdaa1:                  DIGITAL UNSOL STEREO
>hdaa1:         Pin cap: 0x00000014
>hdaa1:                  PDC OUT
>hdaa1:      Pin config: 0x41561150
>hdaa1:     Pin control: 0x00000000
>hdaa1:      Output amp: 0x80052727
>hdaa1:                  mute=1 step=39 size=5 offset=39
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + [DISABLED] <- nid=2 [audio output] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 28 [DISABLED]
>hdaa1:            Name: pin: Line-in (None)
>hdaa1:      Widget cap: 0x0040018d
>hdaa1:                  UNSOL STEREO
>hdaa1:         Pin cap: 0x00003737
>hdaa1:                  ISC TRQD PDC OUT IN VREF[ 50 80 100 GROUND HIZ ]
>hdaa1:      Pin config: 0x41813021
>hdaa1:     Pin control: 0x00000000
>hdaa1:      Output amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + [DISABLED] <- nid=36 [audio mixer] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 29 [DISABLED]
>hdaa1:            Name: vendor widget
>hdaa1:      Widget cap: 0x00f00100
>hdaa1:     connections: 25
>hdaa1:           |
>hdaa1:           + <- nid=7 [audio mixer] (selected)
>hdaa1:           + <- nid=10 [audio mixer] [DISABLED]
>hdaa1:           + <- nid=11 [audio mixer]
>hdaa1:           + <- nid=12 [audio selector]
>hdaa1:           + <- nid=13 [audio selector]
>hdaa1:           + <- nid=14 [audio selector] [DISABLED]
>hdaa1:           + <- nid=15 [audio selector]
>hdaa1:           + <- nid=17 [pin: Headphones (Grey Jack)]
>hdaa1:           + [DISABLED] <- nid=18 [pin: Line-out (None)] [DISABLED]
>hdaa1:           + [DISABLED] <- nid=19 [pin: CD (None)] [DISABLED]
>hdaa1:           + <- nid=20 [pin: Mic (Grey Jack)]
>hdaa1:           + <- nid=21 [pin: Mic (Fixed)]
>hdaa1:           + <- nid=22 [pin: Speaker (Fixed)]
>hdaa1:           + [DISABLED] <- nid=25 [power widget] [DISABLED]
>hdaa1:           + <- nid=26 [beep widget]
>hdaa1:           + [DISABLED] <- nid=28 [pin: Line-in (None)] [DISABLED]
>hdaa1:           + <- nid=30 [audio mixer] [DISABLED]
>hdaa1:           + <- nid=31 [audio mixer] [DISABLED]
>hdaa1:           + <- nid=32 [audio mixer]
>hdaa1:           + <- nid=33 [audio selector]
>hdaa1:           + <- nid=34 [audio selector]
>hdaa1:           + <- nid=35 [audio selector] [DISABLED]
>hdaa1:           + <- nid=36 [audio mixer] [DISABLED]
>hdaa1:           + [DISABLED] <- nid=37 [audio selector] [DISABLED]
>hdaa1:           + <- nid=38 [vendor widget] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 30 [DISABLED]
>hdaa1:            Name: audio mixer
>hdaa1:      Widget cap: 0x00200103
>hdaa1:                  STEREO
>hdaa1:       Input amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + [DISABLED] <- nid=14 [audio selector] [DISABLED]
>hdaa1:           + [DISABLED] <- nid=33 [audio selector]
>hdaa1: 
>hdaa1:             nid: 31 [DISABLED]
>hdaa1:            Name: audio mixer
>hdaa1:      Widget cap: 0x00200100
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + <- nid=30 [audio mixer] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 32
>hdaa1:            Name: audio mixer
>hdaa1:      Widget cap: 0x0020010b
>hdaa1:                  STEREO
>hdaa1:     Association: -2 (0x00000000)
>hdaa1:             OSS: pcm, speaker, mic, monitor
>hdaa1:       Input amp: 0x80051f17
>hdaa1:                  mute=1 step=31 size=5 offset=23
>hdaa1:     connections: 7
>hdaa1:           |
>hdaa1:           + <- nid=20 [pin: Mic (Grey Jack)]
>hdaa1:           + <- nid=21 [pin: Mic (Fixed)]
>hdaa1:           + [DISABLED] <- nid=22 [pin: Speaker (Fixed)]
>hdaa1:           + <- nid=26 [beep widget]
>hdaa1:           + [DISABLED] <- nid=37 [audio selector] [DISABLED]
>hdaa1:           + <- nid=3 [audio output]
>hdaa1:           + [DISABLED] <- nid=4 [audio output] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 33
>hdaa1:            Name: audio selector
>hdaa1:      Widget cap: 0x0030010d
>hdaa1:                  STEREO
>hdaa1:     Association: -2 (0x00000000)
>hdaa1:             OSS: pcm, speaker, mic, monitor
>hdaa1:      Output amp: 0x80051f1f
>hdaa1:                  mute=1 step=31 size=5 offset=31
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + <- nid=32 [audio mixer]
>hdaa1: 
>hdaa1:             nid: 34
>hdaa1:            Name: audio selector
>hdaa1:      Widget cap: 0x00300101
>hdaa1:                  STEREO
>hdaa1:     Association: 0 (0x00008000)
>hdaa1:             OSS: pcm
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + <- nid=3 [audio output] (selected)
>hdaa1:           + [DISABLED] <- nid=4 [audio output] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 35 [DISABLED]
>hdaa1:            Name: audio selector
>hdaa1:      Widget cap: 0x00300101
>hdaa1:                  STEREO
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + <- nid=3 [audio output] (selected)
>hdaa1:           + <- nid=4 [audio output] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 36 [DISABLED]
>hdaa1:            Name: audio mixer
>hdaa1:      Widget cap: 0x00200103
>hdaa1:                  STEREO
>hdaa1:       Input amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + [DISABLED] <- nid=35 [audio selector] [DISABLED]
>hdaa1:           + [DISABLED] <- nid=33 [audio selector]
>hdaa1: 
>hdaa1:             nid: 37 [DISABLED]
>hdaa1:            Name: audio selector
>hdaa1:      Widget cap: 0x0030010d
>hdaa1:                  STEREO
>hdaa1:      Output amp: 0x00270300
>hdaa1:                  mute=0 step=3 size=39 offset=0
>hdaa1:     connections: 1
>hdaa1:           |
>hdaa1:           + [DISABLED] <- nid=28 [pin: Line-in (None)] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 38 [DISABLED]
>hdaa1:            Name: vendor widget
>hdaa1:      Widget cap: 0x00f00100
>hdaa1:     connections: 3
>hdaa1:           |
>hdaa1:           + <- nid=20 [pin: Mic (Grey Jack)] (selected)
>hdaa1:           + <- nid=21 [pin: Mic (Fixed)]
>hdaa1:           + [DISABLED] <- nid=28 [pin: Line-in (None)] [DISABLED]
>hdaa1: 
>hdaa1:             nid: 39 [DISABLED]
>hdaa1:            Name: vendor widget
>hdaa1:      Widget cap: 0x00f00301
>hdaa1:                  DIGITAL STEREO
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + <- nid=8 [audio input] (selected)
>hdaa1:           + <- nid=9 [audio input]
>hdaa1: 
>hdaa1:             nid: 40 [DISABLED]
>hdaa1:            Name: vendor widget
>hdaa1:      Widget cap: 0x00f0030d
>hdaa1:                  DIGITAL STEREO
>hdaa1:      Output amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + <- nid=8 [audio input] (selected)
>hdaa1:           + <- nid=9 [audio input]
>hdaa1: 
>hdaa1:             nid: 41 [DISABLED]
>hdaa1:            Name: vendor widget
>hdaa1:      Widget cap: 0x00f0030d
>hdaa1:                  DIGITAL STEREO
>hdaa1:      Output amp: 0x80000000
>hdaa1:                  mute=1 step=0 size=0 offset=0
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + <- nid=8 [audio input] (selected)
>hdaa1:           + <- nid=9 [audio input]
>hdaa1: 
>hdaa1:             nid: 42 [DISABLED]
>hdaa1:            Name: vendor widget
>hdaa1:      Widget cap: 0x00f00301
>hdaa1:                  DIGITAL STEREO
>hdaa1:     connections: 2
>hdaa1:           |
>hdaa1:           + [DISABLED] <- nid=1 [GHOST!] [UNKNOWN] (selected)
>hdaa1:           + <- nid=39 [vendor widget] [DISABLED]
>hdaa1: 
>pcm1: <Analog Devices AD1984A (Analog 2.0+HP/3.1)> at nid 22,17 and 21,20 on hdaa1
>pcm1: +--------------------------------------+
>pcm1: | DUMPING PCM Playback/Record Channels |
>pcm1: +--------------------------------------+
>pcm1: 
>pcm1: Playback:
>pcm1: 
>pcm1:      Stream cap: 0x00000001
>pcm1:                  PCM
>pcm1:         PCM cap: 0x000e07ff
>pcm1:                  16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz
>pcm1:             DAC: 3
>pcm1: 
>pcm1: Record:
>pcm1: 
>pcm1:      Stream cap: 0x00000001
>pcm1:                  PCM
>pcm1:         PCM cap: 0x000e07ff
>pcm1:                  16 20 24 bits, 8 11 16 22 32 44 48 88 96 176 192 KHz
>pcm1:             DAC: 8 9
>pcm1: 
>pcm1: +-------------------------------+
>pcm1: | DUMPING Playback/Record Paths |
>pcm1: +-------------------------------+
>pcm1: 
>pcm1: Playback:
>pcm1: 
>pcm1:     nid=22 [pin: Speaker (Fixed)]
>pcm1:       |
>pcm1:       + <- nid=11 [audio mixer] [src: pcm, speaker, mic, monitor]
>pcm1:              |
>pcm1:              + <- nid=15 [audio selector] [src: pcm]
>pcm1:                     |
>pcm1:                     + <- nid=3 [audio output] [src: pcm]
>pcm1:              + <- nid=33 [audio selector] [src: pcm, speaker, mic, monitor]
>pcm1:                     |
>pcm1:                     + <- nid=32 [audio mixer] [src: pcm, speaker, mic, monitor]
>pcm1:                            |
>pcm1:                            + <- nid=20 [pin: Mic (Grey Jack)] [src: mic]
>pcm1:                            + <- nid=21 [pin: Mic (Fixed)] [src: monitor]
>pcm1:                            + <- nid=26 [beep widget] [src: speaker]
>pcm1:                            + <- nid=3 [audio output] [src: pcm]
>pcm1: 
>pcm1:     nid=17 [pin: Headphones (Grey Jack)]
>pcm1:       |
>pcm1:       + <- nid=7 [audio mixer] [src: pcm, speaker, mic, monitor]
>pcm1:              |
>pcm1:              + <- nid=34 [audio selector] [src: pcm]
>pcm1:                     |
>pcm1:                     + <- nid=3 [audio output] [src: pcm]
>pcm1:              + <- nid=33 [audio selector] [src: pcm, speaker, mic, monitor]
>pcm1:                     |
>pcm1:                     + <- nid=32 [audio mixer] [src: pcm, speaker, mic, monitor]
>pcm1:                            |
>pcm1:                            + <- nid=20 [pin: Mic (Grey Jack)] [src: mic]
>pcm1:                            + <- nid=21 [pin: Mic (Fixed)] [src: monitor]
>pcm1:                            + <- nid=26 [beep widget] [src: speaker]
>pcm1:                            + <- nid=3 [audio output] [src: pcm]
>pcm1: 
>pcm1: Record:
>pcm1: 
>pcm1:     nid=8 [audio input]
>pcm1:       |
>pcm1:       + <- nid=12 [audio selector] [src: monitor]
>pcm1:              |
>pcm1:              + <- nid=21 [pin: Mic (Fixed)] [src: monitor]
>pcm1: 
>pcm1:     nid=9 [audio input]
>pcm1:       |
>pcm1:       + <- nid=13 [audio selector] [src: mic]
>pcm1:              |
>pcm1:              + <- nid=20 [pin: Mic (Grey Jack)] [src: mic]
>pcm1: 
>pcm1: +-------------------------+
>pcm1: | DUMPING Volume Controls |
>pcm1: +-------------------------+
>pcm1: 
>pcm1: Master Volume (OSS: vol): 0/0dB
>pcm1:    |
>pcm1:    +- ctl  3 (nid   7 in   0): mute
>pcm1:    +- ctl  4 (nid   7 in   1): mute
>pcm1:    +- ctl  7 (nid  11 in   0): mute
>pcm1:    +- ctl  8 (nid  11 in   1): mute
>pcm1:    +- ctl 12 (nid  17 in ):    mute
>pcm1:    +- ctl 17 (nid  22 in ):    mute
>pcm1: 
>pcm1: PCM Volume (OSS: pcm): -58/0dB
>pcm1:    |
>pcm1:    +- ctl  1 (nid   3 out):    -58/0dB (40 steps)
>pcm1:    +- ctl  3 (nid   7 in   0): mute
>pcm1:    +- ctl  7 (nid  11 in   0): mute
>pcm1:    +- ctl 28 (nid  32 in   5): -34/12dB (32 steps) + mute
>pcm1: 
>pcm1: Microphone Volume (OSS: mic): 0/30dB
>pcm1:    |
>pcm1:    +- ctl 10 (nid  13 out):    -58/22dB (55 steps) + mute
>pcm1:    +- ctl 15 (nid  20 out):    0/30dB (4 steps)
>pcm1:    +- ctl 23 (nid  32 in   0): -34/12dB (32 steps) + mute
>pcm1: 
>pcm1: Microphone2 Volume (OSS: monitor): 0/30dB
>pcm1:    |
>pcm1:    +- ctl  9 (nid  12 out):    -58/22dB (55 steps) + mute
>pcm1:    +- ctl 16 (nid  21 out):    0/30dB (4 steps)
>pcm1:    +- ctl 24 (nid  32 in   1): -34/12dB (32 steps) + mute
>pcm1: 
>pcm1: Speaker/Beep Volume (OSS: speaker): -34/0dB
>pcm1:    |
>pcm1:    +- ctl 11 (nid  16 out):    -45/0dB (16 steps) + mute
>pcm1:    +- ctl 26 (nid  32 in   3): -34/12dB (32 steps) + mute
>pcm1: 
>pcm1: Recording Level (OSS: rec): -58/22dB
>pcm1:    |
>pcm1:    +- ctl  9 (nid  12 out):    -58/22dB (55 steps) + mute
>pcm1:    +- ctl 10 (nid  13 out):    -58/22dB (55 steps) + mute
>pcm1: 
>pcm1: Input Monitoring Level (OSS: igain): 0/0dB
>pcm1:    |
>pcm1:    +- ctl  4 (nid   7 in   1): mute
>pcm1:    +- ctl  8 (nid  11 in   1): mute
>pcm1: 
>pcm1: Mixer "vol":
>pcm1: Mixer "pcm":
>pcm1: Mixer "speaker":
>pcm1: Mixer "mic":
>pcm1: Mixer "rec":
>pcm1: Mixer "igain":
>pcm1: Mixer "ogain":
>pcm1: Mixer "monitor":
>pcm1: clone manager: deadline=750ms flags=0x8000001e
>pcm1: sndbuf_setmap 3780000, 10000; 0xffffff80d6502000 -> 3780000
>pcm1: sndbuf_setmap 37c0000, 10000; 0xffffff80d6542000 -> 37c0000
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 12Mbps Full Speed USB v1.0
>ugen0.1: <Intel> at usbus0
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <Intel> at usbus1
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>ugen2.1: <Intel> at usbus2
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen3.1: <Intel> at usbus3
>uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>usbus4: 12Mbps Full Speed USB v1.0
>usbus5: 12Mbps Full Speed USB v1.0
>ugen4.1: <Intel> at usbus4
>uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>ugen5.1: <Intel> at usbus5
>uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
>usbus6: 12Mbps Full Speed USB v1.0
>usbus7: 480Mbps High Speed USB v2.0
>ugen6.1: <Intel> at usbus6
>uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
>ugen7.1: <Intel> at usbus7
>uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
>acpi_tz0: _AC6: temperature 59.0 >= setpoint 56.0
>ahcich0: AHCI reset...
>ahcich0: SATA connect time=100us status=00000123
>ahcich0: AHCI reset: device found
>ahcich0: AHCI reset: device ready after 0ms
>ahcich1: AHCI reset...
>ahcich1: SATA connect time=1100us status=00000113
>ahcich1: AHCI reset: device found
>ahcich1: AHCI reset: device ready after 0ms
>ahcich5: AHCI reset...
>ahcich5: SATA connect timeout time=10000us status=00000000
>ahcich5: AHCI reset: device not found
>uhub0: 2 ports with 2 removable, self powered
>pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
>acpi_tz0: switched from NONE to _AC6: 59.0C
>uhub1: 2 ports with 2 removable, self powered
>battery0: battery initialization start
>acpi_acad0: acline initialization start
>uhub2: 2 ports with 2 removable, self powered
>pass0: <WDC WD3200BEKT-60F3T1 12.01A12> ATA-8 SATA 2.x device
>pass0: Serial Number WD-WX10A99E0964
>pass0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>acpi_tz2: _AC5: temperature 42.0 >= setpoint 37.0
>uhub4: 2 ports with 2 removable, self powered
>uhub5: 2 ports with 2 removable, self powered
>pass0: Command Queueing enabled
>pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
>pass1: <hp DVDRAM GT20L DC05> Removable CD-ROM SCSI-0 device 
>acpi_tz2: switched from NONE to _AC5: 42.0C
>uhub6: 2 ports with 2 removable, self powered
>pass1: Serial Number KYB99RF5831
>pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
>GEOM: new disk cd0
>ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>ada0: <WDC WD3200BEKT-60F3T1 12.01A12> ATA-8cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
>cd0: <hp DVDRAM GT20L DC05> Removable CD-ROM SCSI-0 device 
>cd0: Serial Number KYB99RF5831
>cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
> SATA 2.x device
>ada0: Serial Number WD-WX10A99E0964
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>ada0: Command Queueing enabled
>ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
>ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 49
>ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50
>system power profile changed to 'economy'
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51
>msi: Assigning MSI IRQ 257 to local APIC 1 vector 52
>msi: Assigning MSI IRQ 259 to local APIC 1 vector 53
>acpi_acad0: Off Line
>acpi_acad0: acline initialization done, tried 1 times
>SMP: passed TSC synchronization test
>TSC timecounter discards lower 7 bit(s)
>Timecounter "TSC-low" frequency 16365590 Hz quality 1000
>GEOM: new disk ada0
>acpi_tz0: _AC5: temperature 59.0 >= setpoint 57.0
>acpi_tz0: switched from _AC6 to _AC5: 59.0C
>battery0: battery initialization done, tried 1 times
>acpi_tz0: _AC6: temperature 59.0 >= setpoint 30.0
>acpi_tz0: _AC6: temperature 59.0 >= setpoint 30.0
>Trying to mount root from ufs:/dev/ada0s3a [rw]...
>start_init: trying /sbin/init
>acpi_tz0: _AC6: temperature 60.0 >= setpoint 30.0
>uhub3: 6 ports with 6 removable, self powered
>acpi_tz0: _AC6: temperature 60.0 >= setpoint 30.0
>acpi_tz0: _AC6: temperature 60.0 >= setpoint 30.0
>acpi_tz0: _AC6: temperature 60.0 >= setpoint 30.0
>acpi_tz0: _AC6: temperature 60.0 >= setpoint 30.0
>uhub7: 6 ports with 6 removable, self powered
>ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3
>ugen0.2: <Broadcom Corp> at usbus0
>ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.65, addr 2> on usbus0
>lagg0: bpf attached
>wlan0: bpf attached
>wlan0: bpf attached
>wlan0: Ethernet address: 18:a9:05:87:38:0a
>kbd: new array size 4
>kbd1 at kbdmux0
>wlan0: link state changed to UP
>lagg0: link state changed to UP
>acpi_tz0: _AC6: temperature 61.0 >= setpoint 30.0
>acpi_tz0: _AC6: temperature 61.0 >= setpoint 30.0

Actions: View

Attachments on bug 173840: 129788